/* * --------------------------------------------------------------------------- * Copyright (c) 1998-2007, Brian Gladman, Worcester, UK. All rights reserved. * * LICENSE TERMS * * The free distribution and use of this software is allowed (with or without * changes) provided that: * * 1. source code distributions include the above copyright notice, this * list of conditions and the following disclaimer; * * 2. binary distributions include the above copyright notice, this list * of conditions and the following disclaimer in their documentation; * * 3. the name of the copyright holder is not used to endorse products * built using this software without specific written permission. * * DISCLAIMER * * This software is provided 'as is' with no explicit or implied warranties * in respect of its properties, including, but not limited to, correctness * and/or fitness for purpose. * --------------------------------------------------------------------------- * Issue Date: 20/12/2007 * * This file contains the compilation options for AES (Rijndael) and code * that is common across encryption, key scheduling and table generation. * * OPERATION * * These source code files implement the AES algorithm Rijndael designed by * Joan Daemen and Vincent Rijmen. This version is designed for the standard * block size of 16 bytes and for key sizes of 128, 192 and 256 bits (16, 24 * and 32 bytes). * * This version is designed for flexibility and speed using operations on * 32-bit words rather than operations on bytes. It can be compiled with * either big or little endian internal byte order but is faster when the * native byte order for the processor is used. * * THE CIPHER INTERFACE * * The cipher interface is implemented as an array of bytes in which lower * AES bit sequence indexes map to higher numeric significance within bytes. */ /* * OpenSolaris changes * 1. Added __cplusplus and _AESTAB_H header guards * 2. Added header files sys/types.h and aes_impl.h * 3. Added defines for AES_ENCRYPT, AES_DECRYPT, AES_REV_DKS, and ASM_AMD64_C * 4. Moved defines for IS_BIG_ENDIAN, IS_LITTLE_ENDIAN, PLATFORM_BYTE_ORDER * from brg_endian.h * 5. Undefined VIA_ACE_POSSIBLE and ASSUME_VIA_ACE_PRESENT * 6. Changed uint_8t and uint_32t to uint8_t and uint32_t * 7. cstyled and hdrchk code * */ #ifndef _AESOPT_H #define _AESOPT_H #pragma ident "%Z%%M% %I% %E% SMI" #ifdef __cplusplus extern "C" { #endif #include #include /* SUPPORT FEATURES */ #define AES_ENCRYPT /* if support for encryption is needed */ #define AES_DECRYPT /* if support for decryption is needed */ /* PLATFORM-SPECIFIC FEATURES */ #define IS_BIG_ENDIAN 4321 /* byte 0 is most significant (mc68k) */ #define IS_LITTLE_ENDIAN 1234 /* byte 0 is least significant (i386) */ #define PLATFORM_BYTE_ORDER IS_LITTLE_ENDIAN #define AES_REV_DKS /* define to reverse decryption key schedule */ /* * CONFIGURATION - THE USE OF DEFINES * Later in this section there are a number of defines that control the * operation of the code. In each section, the purpose of each define is * explained so that the relevant form can be included or excluded by * setting either 1's or 0's respectively on the branches of the related * #if clauses. The following local defines should not be changed. */ #define ENCRYPTION_IN_C 1 #define DECRYPTION_IN_C 2 #define ENC_KEYING_IN_C 4 #define DEC_KEYING_IN_C 8 #define NO_TABLES 0 #define ONE_TABLE 1 #define FOUR_TABLES 4 #define NONE 0 #define PARTIAL 1 #define FULL 2 /* --- START OF USER CONFIGURED OPTIONS --- */ /* * 1. BYTE ORDER WITHIN 32 BIT WORDS * * The fundamental data processing units in Rijndael are 8-bit bytes. The * input, output and key input are all enumerated arrays of bytes in which * bytes are numbered starting at zero and increasing to one less than the * number of bytes in the array in question. This enumeration is only used * for naming bytes and does not imply any adjacency or order relationship * from one byte to another. When these inputs and outputs are considered * as bit sequences, bits 8*n to 8*n+7 of the bit sequence are mapped to * byte[n] with bit 8n+i in the sequence mapped to bit 7-i within the byte. * In this implementation bits are numbered from 0 to 7 starting at the * numerically least significant end of each byte. Bit n represents 2^n. * * However, Rijndael can be implemented more efficiently using 32-bit * words by packing bytes into words so that bytes 4*n to 4*n+3 are placed * into word[n]. While in principle these bytes can be assembled into words * in any positions, this implementation only supports the two formats in * which bytes in adjacent positions within words also have adjacent byte * numbers. This order is called big-endian if the lowest numbered bytes * in words have the highest numeric significance and little-endian if the * opposite applies. * * This code can work in either order irrespective of the order used by the * machine on which it runs. Normally the internal byte order will be set * to the order of the processor on which the code is to be run but this * define can be used to reverse this in special situations * * WARNING: Assembler code versions rely on PLATFORM_BYTE_ORDER being set. * This define will hence be redefined later (in section 4) if necessary */ #if 1 #define ALGORITHM_BYTE_ORDER PLATFORM_BYTE_ORDER #elif 0 #define ALGORITHM_BYTE_ORDER IS_LITTLE_ENDIAN #elif 0 #define ALGORITHM_BYTE_ORDER IS_BIG_ENDIAN #else #error The algorithm byte order is not defined #endif /* 2. VIA ACE SUPPORT */ #if defined(__GNUC__) && defined(__i386__) || \ defined(_WIN32) && defined(_M_IX86) && \ !(defined(_WIN64) || defined(_WIN32_WCE) || \ defined(_MSC_VER) && (_MSC_VER <= 800)) #define VIA_ACE_POSSIBLE #endif /* * Define this option if support for the VIA ACE is required. This uses * inline assembler instructions and is only implemented for the Microsoft, * Intel and GCC compilers. If VIA ACE is known to be present, then defining * ASSUME_VIA_ACE_PRESENT will remove the ordinary encryption/decryption * code. If USE_VIA_ACE_IF_PRESENT is defined then VIA ACE will be used if * it is detected (both present and enabled) but the normal AES code will * also be present. * * When VIA ACE is to be used, all AES encryption contexts MUST be 16 byte * aligned; other input/output buffers do not need to be 16 byte aligned * but there are very large performance gains if this can be arranged. * VIA ACE also requires the decryption key schedule to be in reverse * order (which later checks below ensure). */ /* VIA ACE is not used here for OpenSolaris: */ #undef VIA_ACE_POSSIBLE #undef ASSUME_VIA_ACE_PRESENT #if 0 && defined(VIA_ACE_POSSIBLE) && !defined(USE_VIA_ACE_IF_PRESENT) #define USE_VIA_ACE_IF_PRESENT #endif #if 0 && defined(VIA_ACE_POSSIBLE) && !defined(ASSUME_VIA_ACE_PRESENT) #define ASSUME_VIA_ACE_PRESENT #endif /* * 3. ASSEMBLER SUPPORT * * This define (which can be on the command line) enables the use of the * assembler code routines for encryption, decryption and key scheduling * as follows: * * ASM_X86_V1C uses the assembler (aes_x86_v1.asm) with large tables for * encryption and decryption and but with key scheduling in C * ASM_X86_V2 uses assembler (aes_x86_v2.asm) with compressed tables for * encryption, decryption and key scheduling * ASM_X86_V2C uses assembler (aes_x86_v2.asm) with compressed tables for * encryption and decryption and but with key scheduling in C * ASM_AMD64_C uses assembler (aes_amd64.asm) with compressed tables for * encryption and decryption and but with key scheduling in C * * Change one 'if 0' below to 'if 1' to select the version or define * as a compilation option. */ #if 0 && !defined(ASM_X86_V1C) #define ASM_X86_V1C #elif 0 && !defined(ASM_X86_V2) #define ASM_X86_V2 #elif 0 && !defined(ASM_X86_V2C) #define ASM_X86_V2C #elif 1 && !defined(ASM_AMD64_C) #define ASM_AMD64_C #endif #if (defined(ASM_X86_V1C) || defined(ASM_X86_V2) || defined(ASM_X86_V2C)) && \ !defined(_M_IX86) || defined(ASM_AMD64_C) && !defined(_M_X64) && \ !defined(__amd64) #error Assembler code is only available for x86 and AMD64 systems #endif /* * 4. FAST INPUT/OUTPUT OPERATIONS. * * On some machines it is possible to improve speed by transferring the * bytes in the input and output arrays to and from the internal 32-bit * variables by addressing these arrays as if they are arrays of 32-bit * words. On some machines this will always be possible but there may * be a large performance penalty if the byte arrays are not aligned on * the normal word boundaries. On other machines this technique will * lead to memory access errors when such 32-bit word accesses are not * properly aligned. The option SAFE_IO avoids such problems but will * often be slower on those machines that support misaligned access * (especially so if care is taken to align the input and output byte * arrays on 32-bit word boundaries). If SAFE_IO is not defined it is * assumed that access to byte arrays as if they are arrays of 32-bit * words will not cause problems when such accesses are misaligned. */ #if 1 && !defined(_MSC_VER) #define SAFE_IO #endif /* * 5. LOOP UNROLLING * * The code for encryption and decryption cycles through a number of rounds * that can be implemented either in a loop or by expanding the code into a * long sequence of instructions, the latter producing a larger program but * one that will often be much faster. The latter is called loop unrolling. * There are also potential speed advantages in expanding two iterations in * a loop with half the number of iterations, which is called partial loop * unrolling. The following options allow partial or full loop unrolling * to be set independently for encryption and decryption */ #if 1 #define ENC_UNROLL FULL #elif 0 #define ENC_UNROLL PARTIAL #else #define ENC_UNROLL NONE #endif #if 1 #define DEC_UNROLL FULL #elif 0 #define DEC_UNROLL PARTIAL #else #define DEC_UNROLL NONE #endif #if 1 #define ENC_KS_UNROLL #endif #if 1 #define DEC_KS_UNROLL #endif /* * 6. FAST FINITE FIELD OPERATIONS * * If this section is included, tables are used to provide faster finite * field arithmetic. This has no effect if FIXED_TABLES is defined. */ #if 1 #define FF_TABLES #endif /* * 7. INTERNAL STATE VARIABLE FORMAT * * The internal state of Rijndael is stored in a number of local 32-bit * word variables which can be defined either as an array or as individual * names variables. Include this section if you want to store these local * variables in arrays. Otherwise individual local variables will be used. */ #if 1 #define ARRAYS #endif /* * 8. FIXED OR DYNAMIC TABLES * * When this section is included the tables used by the code are compiled * statically into the binary file. Otherwise the subroutine aes_init() * must be called to compute them before the code is first used. */ #if 1 && !(defined(_MSC_VER) && (_MSC_VER <= 800)) #define FIXED_TABLES #endif /* * 9. MASKING OR CASTING FROM LONGER VALUES TO BYTES * * In some systems it is better to mask longer values to extract bytes * rather than using a cast. This option allows this choice. */ #if 0 #define to_byte(x) ((uint8_t)(x)) #else #define to_byte(x) ((x) & 0xff) #endif /* * 10. TABLE ALIGNMENT * * On some systems speed will be improved by aligning the AES large lookup * tables on particular boundaries. This define should be set to a power of * two giving the desired alignment. It can be left undefined if alignment * is not needed. This option is specific to the Micrsoft VC++ compiler - * it seems to sometimes cause trouble for the VC++ version 6 compiler. */ #if 1 && defined(_MSC_VER) && (_MSC_VER >= 1300) #define TABLE_ALIGN 32 #endif /* * 11. REDUCE CODE AND TABLE SIZE * * This replaces some expanded macros with function calls if AES_ASM_V2 or * AES_ASM_V2C are defined */ #if 1 && (defined(ASM_X86_V2) || defined(ASM_X86_V2C)) #define REDUCE_CODE_SIZE #endif /* * 12. TABLE OPTIONS * * This cipher proceeds by repeating in a number of cycles known as rounds * which are implemented by a round function which is optionally be speeded * up using tables. The basic tables are 256 32-bit words, with either * one or four tables being required for each round function depending on * how much speed is required. Encryption and decryption round functions * are different and the last encryption and decryption round functions are * different again making four different round functions in all. * * This means that: * 1. Normal encryption and decryption rounds can each use either 0, 1 * or 4 tables and table spaces of 0, 1024 or 4096 bytes each. * 2. The last encryption and decryption rounds can also use either 0, 1 * or 4 tables and table spaces of 0, 1024 or 4096 bytes each. * * Include or exclude the appropriate definitions below to set the number * of tables used by this implementation. */ #if 1 /* set tables for the normal encryption round */ #define ENC_ROUND FOUR_TABLES #elif 0 #define ENC_ROUND ONE_TABLE #else #define ENC_ROUND NO_TABLES #endif #if 1 /* set tables for the last encryption round */ #define LAST_ENC_ROUND FOUR_TABLES #elif 0 #define LAST_ENC_ROUND ONE_TABLE #else #define LAST_ENC_ROUND NO_TABLES #endif #if 1 /* set tables for the normal decryption round */ #define DEC_ROUND FOUR_TABLES #elif 0 #define DEC_ROUND ONE_TABLE #else #define DEC_ROUND NO_TABLES #endif #if 1 /* set tables for the last decryption round */ #define LAST_DEC_ROUND FOUR_TABLES #elif 0 #define LAST_DEC_ROUND ONE_TABLE #else #define LAST_DEC_ROUND NO_TABLES #endif /* * The decryption key schedule can be speeded up with tables in the same * way that the round functions can. Include or exclude the following * defines to set this requirement. */ #if 1 #define KEY_SCHED FOUR_TABLES #elif 0 #define KEY_SCHED ONE_TABLE #else #define KEY_SCHED NO_TABLES #endif /* ---- END OF USER CONFIGURED OPTIONS ---- */ /* VIA ACE support is only available for VC++ and GCC */ #if !defined(_MSC_VER) && !defined(__GNUC__) #if defined(ASSUME_VIA_ACE_PRESENT) #undef ASSUME_VIA_ACE_PRESENT #endif #if defined(USE_VIA_ACE_IF_PRESENT) #undef USE_VIA_ACE_IF_PRESENT #endif #endif #if defined(ASSUME_VIA_ACE_PRESENT) && !defined(USE_VIA_ACE_IF_PRESENT) #define USE_VIA_ACE_IF_PRESENT #endif #if defined(USE_VIA_ACE_IF_PRESENT) && !defined(AES_REV_DKS) #define AES_REV_DKS #endif /* Assembler support requires the use of platform byte order */ #if (defined(ASM_X86_V1C) || defined(ASM_X86_V2C) || defined(ASM_AMD64_C)) && \ (ALGORITHM_BYTE_ORDER != PLATFORM_BYTE_ORDER) #undef ALGORITHM_BYTE_ORDER #define ALGORITHM_BYTE_ORDER PLATFORM_BYTE_ORDER #endif /* * In this implementation the columns of the state array are each held in * 32-bit words. The state array can be held in various ways: in an array * of words, in a number of individual word variables or in a number of * processor registers. The following define maps a variable name x and * a column number c to the way the state array variable is to be held. * The first define below maps the state into an array x[c] whereas the * second form maps the state into a number of individual variables x0, * x1, etc. Another form could map individual state columns to machine * register names. */ #if defined(ARRAYS) #define s(x, c) x[c] #else #define s(x, c) x##c #endif /* * This implementation provides subroutines for encryption, decryption * and for setting the three key lengths (separately) for encryption * and decryption. Since not all functions are needed, masks are set * up here to determine which will be implemented in C */ #if !defined(AES_ENCRYPT) #define EFUNCS_IN_C 0 #elif defined(ASSUME_VIA_ACE_PRESENT) || defined(ASM_X86_V1C) || \ defined(ASM_X86_V2C) || defined(ASM_AMD64_C) #define EFUNCS_IN_C ENC_KEYING_IN_C #elif !defined(ASM_X86_V2) #define EFUNCS_IN_C (ENCRYPTION_IN_C | ENC_KEYING_IN_C) #else #define EFUNCS_IN_C 0 #endif #if !defined(AES_DECRYPT) #define DFUNCS_IN_C 0 #elif defined(ASSUME_VIA_ACE_PRESENT) || defined(ASM_X86_V1C) || \ defined(ASM_X86_V2C) || defined(ASM_AMD64_C) #define DFUNCS_IN_C DEC_KEYING_IN_C #elif !defined(ASM_X86_V2) #define DFUNCS_IN_C (DECRYPTION_IN_C | DEC_KEYING_IN_C) #else #define DFUNCS_IN_C 0 #endif #define FUNCS_IN_C (EFUNCS_IN_C | DFUNCS_IN_C) /* END OF CONFIGURATION OPTIONS */ /* Disable or report errors on some combinations of options */ #if ENC_ROUND == NO_TABLES && LAST_ENC_ROUND != NO_TABLES #undef LAST_ENC_ROUND #define LAST_ENC_ROUND NO_TABLES #elif ENC_ROUND == ONE_TABLE && LAST_ENC_ROUND == FOUR_TABLES #undef LAST_ENC_ROUND #define LAST_ENC_ROUND ONE_TABLE #endif #if ENC_ROUND == NO_TABLES && ENC_UNROLL != NONE #undef ENC_UNROLL #define ENC_UNROLL NONE #endif #if DEC_ROUND == NO_TABLES && LAST_DEC_ROUND != NO_TABLES #undef LAST_DEC_ROUND #define LAST_DEC_ROUND NO_TABLES #elif DEC_ROUND == ONE_TABLE && LAST_DEC_ROUND == FOUR_TABLES #undef LAST_DEC_ROUND #define LAST_DEC_ROUND ONE_TABLE #endif #if DEC_ROUND == NO_TABLES && DEC_UNROLL != NONE #undef DEC_UNROLL #define DEC_UNROLL NONE #endif #if defined(bswap32) #define aes_sw32 bswap32 #elif defined(bswap_32) #define aes_sw32 bswap_32 #else #define brot(x, n) (((uint32_t)(x) << n) | ((uint32_t)(x) >> (32 - n))) #define aes_sw32(x) ((brot((x), 8) & 0x00ff00ff) | (brot((x), 24) & 0xff00ff00)) #endif /* * upr(x, n): rotates bytes within words by n positions, moving bytes to * higher index positions with wrap around into low positions * ups(x, n): moves bytes by n positions to higher index positions in * words but without wrap around * bval(x, n): extracts a byte from a word * * WARNING: The definitions given here are intended only for use with * unsigned variables and with shift counts that are compile * time constants */ #if (ALGORITHM_BYTE_ORDER == IS_LITTLE_ENDIAN) #define upr(x, n) (((uint32_t)(x) << (8 * (n))) | \ ((uint32_t)(x) >> (32 - 8 * (n)))) #define ups(x, n) ((uint32_t)(x) << (8 * (n))) #define bval(x, n) to_byte((x) >> (8 * (n))) #define bytes2word(b0, b1, b2, b3) \ (((uint32_t)(b3) << 24) | ((uint32_t)(b2) << 16) | \ ((uint32_t)(b1) << 8) | (b0)) #endif #if (ALGORITHM_BYTE_ORDER == IS_BIG_ENDIAN) #define upr(x, n) (((uint32_t)(x) >> (8 * (n))) | \ ((uint32_t)(x) << (32 - 8 * (n)))) #define ups(x, n) ((uint32_t)(x) >> (8 * (n))) #define bval(x, n) to_byte((x) >> (24 - 8 * (n))) #define bytes2word(b0, b1, b2, b3) \ (((uint32_t)(b0) << 24) | ((uint32_t)(b1) << 16) | \ ((uint32_t)(b2) << 8) | (b3)) #endif #if defined(SAFE_IO) #define word_in(x, c) bytes2word(((const uint8_t *)(x) + 4 * c)[0], \ ((const uint8_t *)(x) + 4 * c)[1], \ ((const uint8_t *)(x) + 4 * c)[2], \ ((const uint8_t *)(x) + 4 * c)[3]) #define word_out(x, c, v) { ((uint8_t *)(x) + 4 * c)[0] = bval(v, 0); \ ((uint8_t *)(x) + 4 * c)[1] = bval(v, 1); \ ((uint8_t *)(x) + 4 * c)[2] = bval(v, 2); \ ((uint8_t *)(x) + 4 * c)[3] = bval(v, 3); } #elif (ALGORITHM_BYTE_ORDER == PLATFORM_BYTE_ORDER) #define word_in(x, c) (*((uint32_t *)(x) + (c))) #define word_out(x, c, v) (*((uint32_t *)(x) + (c)) = (v)) #else #define word_in(x, c) aes_sw32(*((uint32_t *)(x) + (c))) #define word_out(x, c, v) (*((uint32_t *)(x) + (c)) = aes_sw32(v)) #endif /* the finite field modular polynomial and elements */ #define WPOLY 0x011b #define BPOLY 0x1b /* multiply four bytes in GF(2^8) by 'x' {02} in parallel */ #define m1 0x80808080 #define m2 0x7f7f7f7f #define gf_mulx(x) ((((x) & m2) << 1) ^ ((((x) & m1) >> 7) * BPOLY)) /* * The following defines provide alternative definitions of gf_mulx that might * give improved performance if a fast 32-bit multiply is not available. Note * that a temporary variable u needs to be defined where gf_mulx is used. * * #define gf_mulx(x) (u = (x) & m1, u |= (u >> 1), ((x) & m2) << 1) ^ \ * ((u >> 3) | (u >> 6)) * #define m4 (0x01010101 * BPOLY) * #define gf_mulx(x) (u = (x) & m1, ((x) & m2) << 1) ^ ((u - (u >> 7)) \ * & m4) */ /* Work out which tables are needed for the different options */ #if defined(ASM_X86_V1C) #if defined(ENC_ROUND) #undef ENC_ROUND #endif #define ENC_ROUND FOUR_TABLES #if defined(LAST_ENC_ROUND) #undef LAST_ENC_ROUND #endif #define LAST_ENC_ROUND FOUR_TABLES #if defined(DEC_ROUND) #undef DEC_ROUND #endif #define DEC_ROUND FOUR_TABLES #if defined(LAST_DEC_ROUND) #undef LAST_DEC_ROUND #endif #define LAST_DEC_ROUND FOUR_TABLES #if defined(KEY_SCHED) #undef KEY_SCHED #define KEY_SCHED FOUR_TABLES #endif #endif #if (FUNCS_IN_C & ENCRYPTION_IN_C) || defined(ASM_X86_V1C) #if ENC_ROUND == ONE_TABLE #define FT1_SET #elif ENC_ROUND == FOUR_TABLES #define FT4_SET #else #define SBX_SET #endif #if LAST_ENC_ROUND == ONE_TABLE #define FL1_SET #elif LAST_ENC_ROUND == FOUR_TABLES #define FL4_SET #elif !defined(SBX_SET) #define SBX_SET #endif #endif #if (FUNCS_IN_C & DECRYPTION_IN_C) || defined(ASM_X86_V1C) #if DEC_ROUND == ONE_TABLE #define IT1_SET #elif DEC_ROUND == FOUR_TABLES #define IT4_SET #else #define ISB_SET #endif #if LAST_DEC_ROUND == ONE_TABLE #define IL1_SET #elif LAST_DEC_ROUND == FOUR_TABLES #define IL4_SET #elif !defined(ISB_SET) #define ISB_SET #endif #endif #if !(defined(REDUCE_CODE_SIZE) && (defined(ASM_X86_V2) || \ defined(ASM_X86_V2C))) #if ((FUNCS_IN_C & ENC_KEYING_IN_C) || (FUNCS_IN_C & DEC_KEYING_IN_C)) #if KEY_SCHED == ONE_TABLE #if !defined(FL1_SET) && !defined(FL4_SET) #define LS1_SET #endif #elif KEY_SCHED == FOUR_TABLES #if !defined(FL4_SET) #define LS4_SET #endif #elif !defined(SBX_SET) #define SBX_SET #endif #endif #if (FUNCS_IN_C & DEC_KEYING_IN_C) #if KEY_SCHED == ONE_TABLE #define IM1_SET #elif KEY_SCHED == FOUR_TABLES #define IM4_SET #elif !defined(SBX_SET) #define SBX_SET #endif #endif #endif /* generic definitions of Rijndael macros that use tables */ #define no_table(x, box, vf, rf, c) bytes2word(\ box[bval(vf(x, 0, c), rf(0, c))], \ box[bval(vf(x, 1, c), rf(1, c))], \ box[bval(vf(x, 2, c), rf(2, c))], \ box[bval(vf(x, 3, c), rf(3, c))]) #define one_table(x, op, tab, vf, rf, c) \ (tab[bval(vf(x, 0, c), rf(0, c))] \ ^ op(tab[bval(vf(x, 1, c), rf(1, c))], 1) \ ^ op(tab[bval(vf(x, 2, c), rf(2, c))], 2) \ ^ op(tab[bval(vf(x, 3, c), rf(3, c))], 3)) #define four_tables(x, tab, vf, rf, c) \ (tab[0][bval(vf(x, 0, c), rf(0, c))] \ ^ tab[1][bval(vf(x, 1, c), rf(1, c))] \ ^ tab[2][bval(vf(x, 2, c), rf(2, c))] \ ^ tab[3][bval(vf(x, 3, c), rf(3, c))]) #define vf1(x, r, c) (x) #define rf1(r, c) (r) #define rf2(r, c) ((8+r-c)&3) /* * Perform forward and inverse column mix operation on four bytes in long word * x in parallel. NOTE: x must be a simple variable, NOT an expression in * these macros. */ #if !(defined(REDUCE_CODE_SIZE) && (defined(ASM_X86_V2) || \ defined(ASM_X86_V2C))) #if defined(FM4_SET) /* not currently used */ #define fwd_mcol(x) four_tables(x, t_use(f, m), vf1, rf1, 0) #elif defined(FM1_SET) /* not currently used */ #define fwd_mcol(x) one_table(x, upr, t_use(f, m), vf1, rf1, 0) #else #define dec_fmvars uint32_t g2 #define fwd_mcol(x) (g2 = gf_mulx(x), g2 ^ upr((x) ^ g2, 3) ^ \ upr((x), 2) ^ upr((x), 1)) #endif #if defined(IM4_SET) #define inv_mcol(x) four_tables(x, t_use(i, m), vf1, rf1, 0) #elif defined(IM1_SET) #define inv_mcol(x) one_table(x, upr, t_use(i, m), vf1, rf1, 0) #else #define dec_imvars uint32_t g2, g4, g9 #define inv_mcol(x) (g2 = gf_mulx(x), g4 = gf_mulx(g2), g9 = \ (x) ^ gf_mulx(g4), g4 ^= g9, \ (x) ^ g2 ^ g4 ^ upr(g2 ^ g9, 3) ^ \ upr(g4, 2) ^ upr(g9, 1)) #endif #if defined(FL4_SET) #define ls_box(x, c) four_tables(x, t_use(f, l), vf1, rf2, c) #elif defined(LS4_SET) #define ls_box(x, c) four_tables(x, t_use(l, s), vf1, rf2, c) #elif defined(FL1_SET) #define ls_box(x, c) one_table(x, upr, t_use(f, l), vf1, rf2, c) #elif defined(LS1_SET) #define ls_box(x, c) one_table(x, upr, t_use(l, s), vf1, rf2, c) #else #define ls_box(x, c) no_table(x, t_use(s, box), vf1, rf2, c) #endif #endif #if defined(ASM_X86_V1C) && defined(AES_DECRYPT) && !defined(ISB_SET) #define ISB_SET #endif #ifdef __cplusplus } #endif #endif /* _AESOPT_H */