/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2007 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" /* * Functions to convert between a list of vdevs and an nvlist representing the * configuration. Each entry in the list can be one of: * * Device vdevs * disk=(path=..., devid=...) * file=(path=...) * * Group vdevs * raidz[1|2]=(...) * mirror=(...) * * Hot spares * * While the underlying implementation supports it, group vdevs cannot contain * other group vdevs. All userland verification of devices is contained within * this file. If successful, the nvlist returned can be passed directly to the * kernel; we've done as much verification as possible in userland. * * Hot spares are a special case, and passed down as an array of disk vdevs, at * the same level as the root of the vdev tree. * * The only function exported by this file is 'get_vdev_spec'. The function * performs several passes: * * 1. Construct the vdev specification. Performs syntax validation and * makes sure each device is valid. * 2. Check for devices in use. Using libdiskmgt, makes sure that no * devices are also in use. Some can be overridden using the 'force' * flag, others cannot. * 3. Check for replication errors if the 'force' flag is not specified. * validates that the replication level is consistent across the * entire pool. * 4. Label any whole disks with an EFI label. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "zpool_util.h" #define DISK_ROOT "/dev/dsk" #define RDISK_ROOT "/dev/rdsk" #define BACKUP_SLICE "s2" /* * For any given vdev specification, we can have multiple errors. The * vdev_error() function keeps track of whether we have seen an error yet, and * prints out a header if its the first error we've seen. */ boolean_t error_seen; boolean_t is_force; /*PRINTFLIKE1*/ static void vdev_error(const char *fmt, ...) { va_list ap; if (!error_seen) { (void) fprintf(stderr, gettext("invalid vdev specification\n")); if (!is_force) (void) fprintf(stderr, gettext("use '-f' to override " "the following errors:\n")); else (void) fprintf(stderr, gettext("the following errors " "must be manually repaired:\n")); error_seen = B_TRUE; } va_start(ap, fmt); (void) vfprintf(stderr, fmt, ap); va_end(ap); } static void libdiskmgt_error(int error) { /* * ENXIO/ENODEV is a valid error message if the device doesn't live in * /dev/dsk. Don't bother printing an error message in this case. */ if (error == ENXIO || error == ENODEV) return; (void) fprintf(stderr, gettext("warning: device in use checking " "failed: %s\n"), strerror(error)); } /* * Validate a device, passing the bulk of the work off to libdiskmgt. */ int check_slice(const char *path, int force, boolean_t wholedisk, boolean_t isspare) { char *msg; int error = 0; int ret = 0; if (dm_inuse((char *)path, &msg, isspare ? DM_WHO_ZPOOL_SPARE : (force ? DM_WHO_ZPOOL_FORCE : DM_WHO_ZPOOL), &error) || error) { if (error != 0) { libdiskmgt_error(error); return (0); } else { vdev_error("%s", msg); free(msg); ret = -1; } } /* * If we're given a whole disk, ignore overlapping slices since we're * about to label it anyway. */ error = 0; if (!wholedisk && !force && (dm_isoverlapping((char *)path, &msg, &error) || error)) { if (error != 0) { libdiskmgt_error(error); return (0); } else { vdev_error("%s overlaps with %s\n", path, msg); free(msg); } ret = -1; } return (ret); } /* * Validate a whole disk. Iterate over all slices on the disk and make sure * that none is in use by calling check_slice(). */ /* ARGSUSED */ int check_disk(const char *name, dm_descriptor_t disk, int force, int isspare) { dm_descriptor_t *drive, *media, *slice; int err = 0; int i; int ret; /* * Get the drive associated with this disk. This should never fail, * because we already have an alias handle open for the device. */ if ((drive = dm_get_associated_descriptors(disk, DM_DRIVE, &err)) == NULL || *drive == NULL) { if (err) libdiskmgt_error(err); return (0); } if ((media = dm_get_associated_descriptors(*drive, DM_MEDIA, &err)) == NULL) { dm_free_descriptors(drive); if (err) libdiskmgt_error(err); return (0); } dm_free_descriptors(drive); /* * It is possible that the user has specified a removable media drive, * and the media is not present. */ if (*media == NULL) { dm_free_descriptors(media); vdev_error(gettext("'%s' has no media in drive\n"), name); return (-1); } if ((slice = dm_get_associated_descriptors(*media, DM_SLICE, &err)) == NULL) { dm_free_descriptors(media); if (err) libdiskmgt_error(err); return (0); } dm_free_descriptors(media); ret = 0; /* * Iterate over all slices and report any errors. We don't care about * overlapping slices because we are using the whole disk. */ for (i = 0; slice[i] != NULL; i++) { char *name = dm_get_name(slice[i], &err); if (check_slice(name, force, B_TRUE, isspare) != 0) ret = -1; dm_free_name(name); } dm_free_descriptors(slice); return (ret); } /* * Validate a device. */ int check_device(const char *path, boolean_t force, boolean_t isspare) { dm_descriptor_t desc; int err; char *dev; /* * For whole disks, libdiskmgt does not include the leading dev path. */ dev = strrchr(path, '/'); assert(dev != NULL); dev++; if ((desc = dm_get_descriptor_by_name(DM_ALIAS, dev, &err)) != NULL) { err = check_disk(path, desc, force, isspare); dm_free_descriptor(desc); return (err); } return (check_slice(path, force, B_FALSE, isspare)); } /* * Check that a file is valid. All we can do in this case is check that it's * not in use by another pool. */ int check_file(const char *file, boolean_t force, boolean_t isspare) { char *name; int fd; int ret = 0; pool_state_t state; boolean_t inuse; if ((fd = open(file, O_RDONLY)) < 0) return (0); if (zpool_in_use(g_zfs, fd, &state, &name, &inuse) == 0 && inuse) { const char *desc; switch (state) { case POOL_STATE_ACTIVE: desc = gettext("active"); break; case POOL_STATE_EXPORTED: desc = gettext("exported"); break; case POOL_STATE_POTENTIALLY_ACTIVE: desc = gettext("potentially active"); break; default: desc = gettext("unknown"); break; } /* * Allow hot spares to be shared between pools. */ if (state == POOL_STATE_SPARE && isspare) return (0); if (state == POOL_STATE_ACTIVE || state == POOL_STATE_SPARE || !force) { switch (state) { case POOL_STATE_SPARE: vdev_error(gettext("%s is reserved as a hot " "spare for pool %s\n"), file, name); break; default: vdev_error(gettext("%s is part of %s pool " "'%s'\n"), file, desc, name); break; } ret = -1; } free(name); } (void) close(fd); return (ret); } static boolean_t is_whole_disk(const char *arg, struct stat64 *statbuf) { char path[MAXPATHLEN]; (void) snprintf(path, sizeof (path), "%s%s", arg, BACKUP_SLICE); if (stat64(path, statbuf) == 0) return (B_TRUE); return (B_FALSE); } /* * Create a leaf vdev. Determine if this is a file or a device. If it's a * device, fill in the device id to make a complete nvlist. Valid forms for a * leaf vdev are: * * /dev/dsk/xxx Complete disk path * /xxx Full path to file * xxx Shorthand for /dev/dsk/xxx */ nvlist_t * make_leaf_vdev(const char *arg) { char path[MAXPATHLEN]; struct stat64 statbuf; nvlist_t *vdev = NULL; char *type = NULL; boolean_t wholedisk = B_FALSE; /* * Determine what type of vdev this is, and put the full path into * 'path'. We detect whether this is a device of file afterwards by * checking the st_mode of the file. */ if (arg[0] == '/') { /* * Complete device or file path. Exact type is determined by * examining the file descriptor afterwards. */ if (is_whole_disk(arg, &statbuf)) { wholedisk = B_TRUE; } else if (stat64(arg, &statbuf) != 0) { (void) fprintf(stderr, gettext("cannot open '%s': %s\n"), arg, strerror(errno)); return (NULL); } (void) strlcpy(path, arg, sizeof (path)); } else { /* * This may be a short path for a device, or it could be total * gibberish. Check to see if it's a known device in * /dev/dsk/. As part of this check, see if we've been given a * an entire disk (minus the slice number). */ (void) snprintf(path, sizeof (path), "%s/%s", DISK_ROOT, arg); if (is_whole_disk(path, &statbuf)) { wholedisk = B_TRUE; } else if (stat64(path, &statbuf) != 0) { /* * If we got ENOENT, then the user gave us * gibberish, so try to direct them with a * reasonable error message. Otherwise, * regurgitate strerror() since it's the best we * can do. */ if (errno == ENOENT) { (void) fprintf(stderr, gettext("cannot open '%s': no such " "device in %s\n"), arg, DISK_ROOT); (void) fprintf(stderr, gettext("must be a full path or " "shorthand device name\n")); return (NULL); } else { (void) fprintf(stderr, gettext("cannot open '%s': %s\n"), path, strerror(errno)); return (NULL); } } } /* * Determine whether this is a device or a file. */ if (S_ISBLK(statbuf.st_mode)) { type = VDEV_TYPE_DISK; } else if (S_ISREG(statbuf.st_mode)) { type = VDEV_TYPE_FILE; } else { (void) fprintf(stderr, gettext("cannot use '%s': must be a " "block device or regular file\n"), path); return (NULL); } /* * Finally, we have the complete device or file, and we know that it is * acceptable to use. Construct the nvlist to describe this vdev. All * vdevs have a 'path' element, and devices also have a 'devid' element. */ verify(nvlist_alloc(&vdev, NV_UNIQUE_NAME, 0) == 0); verify(nvlist_add_string(vdev, ZPOOL_CONFIG_PATH, path) == 0); verify(nvlist_add_string(vdev, ZPOOL_CONFIG_TYPE, type) == 0); if (strcmp(type, VDEV_TYPE_DISK) == 0) verify(nvlist_add_uint64(vdev, ZPOOL_CONFIG_WHOLE_DISK, (uint64_t)wholedisk) == 0); /* * For a whole disk, defer getting its devid until after labeling it. */ if (S_ISBLK(statbuf.st_mode) && !wholedisk) { /* * Get the devid for the device. */ int fd; ddi_devid_t devid; char *minor = NULL, *devid_str = NULL; if ((fd = open(path, O_RDONLY)) < 0) { (void) fprintf(stderr, gettext("cannot open '%s': " "%s\n"), path, strerror(errno)); nvlist_free(vdev); return (NULL); } if (devid_get(fd, &devid) == 0) { if (devid_get_minor_name(fd, &minor) == 0 && (devid_str = devid_str_encode(devid, minor)) != NULL) { verify(nvlist_add_string(vdev, ZPOOL_CONFIG_DEVID, devid_str) == 0); } if (devid_str != NULL) devid_str_free(devid_str); if (minor != NULL) devid_str_free(minor); devid_free(devid); } (void) close(fd); } return (vdev); } /* * Go through and verify the replication level of the pool is consistent. * Performs the following checks: * * For the new spec, verifies that devices in mirrors and raidz are the * same size. * * If the current configuration already has inconsistent replication * levels, ignore any other potential problems in the new spec. * * Otherwise, make sure that the current spec (if there is one) and the new * spec have consistent replication levels. */ typedef struct replication_level { char *zprl_type; uint64_t zprl_children; uint64_t zprl_parity; } replication_level_t; /* * Given a list of toplevel vdevs, return the current replication level. If * the config is inconsistent, then NULL is returned. If 'fatal' is set, then * an error message will be displayed for each self-inconsistent vdev. */ replication_level_t * get_replication(nvlist_t *nvroot, boolean_t fatal) { nvlist_t **top; uint_t t, toplevels; nvlist_t **child; uint_t c, children; nvlist_t *nv; char *type; replication_level_t lastrep, rep, *ret; boolean_t dontreport; ret = safe_malloc(sizeof (replication_level_t)); verify(nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_CHILDREN, &top, &toplevels) == 0); lastrep.zprl_type = NULL; for (t = 0; t < toplevels; t++) { nv = top[t]; verify(nvlist_lookup_string(nv, ZPOOL_CONFIG_TYPE, &type) == 0); if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, &child, &children) != 0) { /* * This is a 'file' or 'disk' vdev. */ rep.zprl_type = type; rep.zprl_children = 1; rep.zprl_parity = 0; } else { uint64_t vdev_size; /* * This is a mirror or RAID-Z vdev. Go through and make * sure the contents are all the same (files vs. disks), * keeping track of the number of elements in the * process. * * We also check that the size of each vdev (if it can * be determined) is the same. */ rep.zprl_type = type; rep.zprl_children = 0; if (strcmp(type, VDEV_TYPE_RAIDZ) == 0) { verify(nvlist_lookup_uint64(nv, ZPOOL_CONFIG_NPARITY, &rep.zprl_parity) == 0); assert(rep.zprl_parity != 0); } else { rep.zprl_parity = 0; } /* * The 'dontreport' variable indicatest that we've * already reported an error for this spec, so don't * bother doing it again. */ type = NULL; dontreport = 0; vdev_size = -1ULL; for (c = 0; c < children; c++) { nvlist_t *cnv = child[c]; char *path; struct stat64 statbuf; uint64_t size = -1ULL; char *childtype; int fd, err; rep.zprl_children++; verify(nvlist_lookup_string(cnv, ZPOOL_CONFIG_TYPE, &childtype) == 0); /* * If this is a a replacing or spare vdev, then * get the real first child of the vdev. */ if (strcmp(childtype, VDEV_TYPE_REPLACING) == 0 || strcmp(childtype, VDEV_TYPE_SPARE) == 0) { nvlist_t **rchild; uint_t rchildren; verify(nvlist_lookup_nvlist_array(cnv, ZPOOL_CONFIG_CHILDREN, &rchild, &rchildren) == 0); assert(rchildren == 2); cnv = rchild[0]; verify(nvlist_lookup_string(cnv, ZPOOL_CONFIG_TYPE, &childtype) == 0); } verify(nvlist_lookup_string(cnv, ZPOOL_CONFIG_PATH, &path) == 0); /* * If we have a raidz/mirror that combines disks * with files, report it as an error. */ if (!dontreport && type != NULL && strcmp(type, childtype) != 0) { if (ret != NULL) free(ret); ret = NULL; if (fatal) vdev_error(gettext( "mismatched replication " "level: %s contains both " "files and devices\n"), rep.zprl_type); else return (NULL); dontreport = B_TRUE; } /* * According to stat(2), the value of 'st_size' * is undefined for block devices and character * devices. But there is no effective way to * determine the real size in userland. * * Instead, we'll take advantage of an * implementation detail of spec_size(). If the * device is currently open, then we (should) * return a valid size. * * If we still don't get a valid size (indicated * by a size of 0 or MAXOFFSET_T), then ignore * this device altogether. */ if ((fd = open(path, O_RDONLY)) >= 0) { err = fstat64(fd, &statbuf); (void) close(fd); } else { err = stat64(path, &statbuf); } if (err != 0 || statbuf.st_size == 0 || statbuf.st_size == MAXOFFSET_T) continue; size = statbuf.st_size; /* * Also check the size of each device. If they * differ, then report an error. */ if (!dontreport && vdev_size != -1ULL && size != vdev_size) { if (ret != NULL) free(ret); ret = NULL; if (fatal) vdev_error(gettext( "%s contains devices of " "different sizes\n"), rep.zprl_type); else return (NULL); dontreport = B_TRUE; } type = childtype; vdev_size = size; } } /* * At this point, we have the replication of the last toplevel * vdev in 'rep'. Compare it to 'lastrep' to see if its * different. */ if (lastrep.zprl_type != NULL) { if (strcmp(lastrep.zprl_type, rep.zprl_type) != 0) { if (ret != NULL) free(ret); ret = NULL; if (fatal) vdev_error(gettext( "mismatched replication level: " "both %s and %s vdevs are " "present\n"), lastrep.zprl_type, rep.zprl_type); else return (NULL); } else if (lastrep.zprl_parity != rep.zprl_parity) { if (ret) free(ret); ret = NULL; if (fatal) vdev_error(gettext( "mismatched replication level: " "both %llu and %llu device parity " "%s vdevs are present\n"), lastrep.zprl_parity, rep.zprl_parity, rep.zprl_type); else return (NULL); } else if (lastrep.zprl_children != rep.zprl_children) { if (ret) free(ret); ret = NULL; if (fatal) vdev_error(gettext( "mismatched replication level: " "both %llu-way and %llu-way %s " "vdevs are present\n"), lastrep.zprl_children, rep.zprl_children, rep.zprl_type); else return (NULL); } } lastrep = rep; } if (ret != NULL) *ret = rep; return (ret); } /* * Check the replication level of the vdev spec against the current pool. Calls * get_replication() to make sure the new spec is self-consistent. If the pool * has a consistent replication level, then we ignore any errors. Otherwise, * report any difference between the two. */ int check_replication(nvlist_t *config, nvlist_t *newroot) { replication_level_t *current = NULL, *new; int ret; /* * If we have a current pool configuration, check to see if it's * self-consistent. If not, simply return success. */ if (config != NULL) { nvlist_t *nvroot; verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, &nvroot) == 0); if ((current = get_replication(nvroot, B_FALSE)) == NULL) return (0); } /* * Get the replication level of the new vdev spec, reporting any * inconsistencies found. */ if ((new = get_replication(newroot, B_TRUE)) == NULL) { free(current); return (-1); } /* * Check to see if the new vdev spec matches the replication level of * the current pool. */ ret = 0; if (current != NULL) { if (strcmp(current->zprl_type, new->zprl_type) != 0) { vdev_error(gettext( "mismatched replication level: pool uses %s " "and new vdev is %s\n"), current->zprl_type, new->zprl_type); ret = -1; } else if (current->zprl_parity != new->zprl_parity) { vdev_error(gettext( "mismatched replication level: pool uses %llu " "device parity and new vdev uses %llu\n"), current->zprl_parity, new->zprl_parity); ret = -1; } else if (current->zprl_children != new->zprl_children) { vdev_error(gettext( "mismatched replication level: pool uses %llu-way " "%s and new vdev uses %llu-way %s\n"), current->zprl_children, current->zprl_type, new->zprl_children, new->zprl_type); ret = -1; } } free(new); if (current != NULL) free(current); return (ret); } /* * Label an individual disk. The name provided is the short name, stripped of * any leading /dev path. */ int label_disk(char *name) { char path[MAXPATHLEN]; struct dk_gpt *vtoc; int fd; size_t resv = 16384; (void) snprintf(path, sizeof (path), "%s/%s%s", RDISK_ROOT, name, BACKUP_SLICE); if ((fd = open(path, O_RDWR | O_NDELAY)) < 0) { /* * This shouldn't happen. We've long since verified that this * is a valid device. */ (void) fprintf(stderr, gettext("cannot open '%s': %s\n"), path, strerror(errno)); return (-1); } if (efi_alloc_and_init(fd, 9, &vtoc) != 0) { /* * The only way this can fail is if we run out of memory, or we * were unable to read the disk geometry. */ if (errno == ENOMEM) zpool_no_memory(); (void) fprintf(stderr, gettext("cannot label '%s': unable to " "read disk geometry\n"), name); (void) close(fd); return (-1); } vtoc->efi_parts[0].p_start = vtoc->efi_first_u_lba; vtoc->efi_parts[0].p_size = vtoc->efi_last_u_lba + 1 - vtoc->efi_first_u_lba - resv; /* * Why we use V_USR: V_BACKUP confuses users, and is considered * disposable by some EFI utilities (since EFI doesn't have a backup * slice). V_UNASSIGNED is supposed to be used only for zero size * partitions, and efi_write() will fail if we use it. V_ROOT, V_BOOT, * etc. were all pretty specific. V_USR is as close to reality as we * can get, in the absence of V_OTHER. */ vtoc->efi_parts[0].p_tag = V_USR; (void) strcpy(vtoc->efi_parts[0].p_name, "zfs"); vtoc->efi_parts[8].p_start = vtoc->efi_last_u_lba + 1 - resv; vtoc->efi_parts[8].p_size = resv; vtoc->efi_parts[8].p_tag = V_RESERVED; if (efi_write(fd, vtoc) != 0) { /* * Currently, EFI labels are not supported for IDE disks, and it * is likely that they will not be supported on other drives for * some time. Print out a helpful error message directing the * user to manually label the disk and give a specific slice. */ (void) fprintf(stderr, gettext("cannot label '%s': failed to " "write EFI label\n"), name); (void) fprintf(stderr, gettext("use fdisk(1M) to partition " "the disk, and provide a specific slice\n")); (void) close(fd); efi_free(vtoc); return (-1); } (void) close(fd); efi_free(vtoc); return (0); } /* * Go through and find any whole disks in the vdev specification, labelling them * as appropriate. When constructing the vdev spec, we were unable to open this * device in order to provide a devid. Now that we have labelled the disk and * know that slice 0 is valid, we can construct the devid now. * * If the disk was already labelled with an EFI label, we will have gotten the * devid already (because we were able to open the whole disk). Otherwise, we * need to get the devid after we label the disk. */ int make_disks(nvlist_t *nv) { nvlist_t **child; uint_t c, children; char *type, *path, *diskname; char buf[MAXPATHLEN]; uint64_t wholedisk; int fd; int ret; ddi_devid_t devid; char *minor = NULL, *devid_str = NULL; verify(nvlist_lookup_string(nv, ZPOOL_CONFIG_TYPE, &type) == 0); if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, &child, &children) != 0) { if (strcmp(type, VDEV_TYPE_DISK) != 0) return (0); /* * We have a disk device. Get the path to the device * and see if its a whole disk by appending the backup * slice and stat()ing the device. */ verify(nvlist_lookup_string(nv, ZPOOL_CONFIG_PATH, &path) == 0); if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_WHOLE_DISK, &wholedisk) != 0 || !wholedisk) return (0); diskname = strrchr(path, '/'); assert(diskname != NULL); diskname++; if (label_disk(diskname) != 0) return (-1); /* * Fill in the devid, now that we've labeled the disk. */ (void) snprintf(buf, sizeof (buf), "%ss0", path); if ((fd = open(buf, O_RDONLY)) < 0) { (void) fprintf(stderr, gettext("cannot open '%s': %s\n"), buf, strerror(errno)); return (-1); } if (devid_get(fd, &devid) == 0) { if (devid_get_minor_name(fd, &minor) == 0 && (devid_str = devid_str_encode(devid, minor)) != NULL) { verify(nvlist_add_string(nv, ZPOOL_CONFIG_DEVID, devid_str) == 0); } if (devid_str != NULL) devid_str_free(devid_str); if (minor != NULL) devid_str_free(minor); devid_free(devid); } /* * Update the path to refer to the 's0' slice. The presence of * the 'whole_disk' field indicates to the CLI that we should * chop off the slice number when displaying the device in * future output. */ verify(nvlist_add_string(nv, ZPOOL_CONFIG_PATH, buf) == 0); (void) close(fd); return (0); } for (c = 0; c < children; c++) if ((ret = make_disks(child[c])) != 0) return (ret); if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_SPARES, &child, &children) == 0) for (c = 0; c < children; c++) if ((ret = make_disks(child[c])) != 0) return (ret); return (0); } /* * Determine if the given path is a hot spare within the given configuration. */ static boolean_t is_spare(nvlist_t *config, const char *path) { int fd; pool_state_t state; char *name = NULL; nvlist_t *label; uint64_t guid, spareguid; nvlist_t *nvroot; nvlist_t **spares; uint_t i, nspares; boolean_t inuse; if ((fd = open(path, O_RDONLY)) < 0) return (B_FALSE); if (zpool_in_use(g_zfs, fd, &state, &name, &inuse) != 0 || !inuse || state != POOL_STATE_SPARE || zpool_read_label(fd, &label) != 0) { free(name); (void) close(fd); return (B_FALSE); } free(name); (void) close(fd); verify(nvlist_lookup_uint64(label, ZPOOL_CONFIG_GUID, &guid) == 0); nvlist_free(label); verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, &nvroot) == 0); if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_SPARES, &spares, &nspares) == 0) { for (i = 0; i < nspares; i++) { verify(nvlist_lookup_uint64(spares[i], ZPOOL_CONFIG_GUID, &spareguid) == 0); if (spareguid == guid) return (B_TRUE); } } return (B_FALSE); } /* * Go through and find any devices that are in use. We rely on libdiskmgt for * the majority of this task. */ int check_in_use(nvlist_t *config, nvlist_t *nv, int force, int isreplacing, int isspare) { nvlist_t **child; uint_t c, children; char *type, *path; int ret; char buf[MAXPATHLEN]; uint64_t wholedisk; verify(nvlist_lookup_string(nv, ZPOOL_CONFIG_TYPE, &type) == 0); if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, &child, &children) != 0) { verify(nvlist_lookup_string(nv, ZPOOL_CONFIG_PATH, &path) == 0); /* * As a generic check, we look to see if this is a replace of a * hot spare within the same pool. If so, we allow it * regardless of what libdiskmgt or zpool_in_use() says. */ if (isreplacing) { if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_WHOLE_DISK, &wholedisk) == 0 && wholedisk) (void) snprintf(buf, sizeof (buf), "%ss0", path); else (void) strlcpy(buf, path, sizeof (buf)); if (is_spare(config, buf)) return (0); } if (strcmp(type, VDEV_TYPE_DISK) == 0) ret = check_device(path, force, isspare); if (strcmp(type, VDEV_TYPE_FILE) == 0) ret = check_file(path, force, isspare); return (ret); } for (c = 0; c < children; c++) if ((ret = check_in_use(config, child[c], force, isreplacing, B_FALSE)) != 0) return (ret); if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_SPARES, &child, &children) == 0) for (c = 0; c < children; c++) if ((ret = check_in_use(config, child[c], force, isreplacing, B_TRUE)) != 0) return (ret); return (0); } const char * is_grouping(const char *type, int *mindev) { if (strcmp(type, "raidz") == 0 || strcmp(type, "raidz1") == 0) { if (mindev != NULL) *mindev = 2; return (VDEV_TYPE_RAIDZ); } if (strcmp(type, "raidz2") == 0) { if (mindev != NULL) *mindev = 3; return (VDEV_TYPE_RAIDZ); } if (strcmp(type, "mirror") == 0) { if (mindev != NULL) *mindev = 2; return (VDEV_TYPE_MIRROR); } if (strcmp(type, "spare") == 0) { if (mindev != NULL) *mindev = 1; return (VDEV_TYPE_SPARE); } return (NULL); } /* * Construct a syntactically valid vdev specification, * and ensure that all devices and files exist and can be opened. * Note: we don't bother freeing anything in the error paths * because the program is just going to exit anyway. */ nvlist_t * construct_spec(int argc, char **argv) { nvlist_t *nvroot, *nv, **top, **spares; int t, toplevels, mindev, nspares; const char *type; top = NULL; toplevels = 0; spares = NULL; nspares = 0; while (argc > 0) { nv = NULL; /* * If it's a mirror or raidz, the subsequent arguments are * its leaves -- until we encounter the next mirror or raidz. */ if ((type = is_grouping(argv[0], &mindev)) != NULL) { nvlist_t **child = NULL; int c, children = 0; if (strcmp(type, VDEV_TYPE_SPARE) == 0 && spares != NULL) { (void) fprintf(stderr, gettext("invalid vdev " "specification: 'spare' can be " "specified only once\n")); return (NULL); } for (c = 1; c < argc; c++) { if (is_grouping(argv[c], NULL) != NULL) break; children++; child = realloc(child, children * sizeof (nvlist_t *)); if (child == NULL) zpool_no_memory(); if ((nv = make_leaf_vdev(argv[c])) == NULL) return (NULL); child[children - 1] = nv; } if (children < mindev) { (void) fprintf(stderr, gettext("invalid vdev " "specification: %s requires at least %d " "devices\n"), argv[0], mindev); return (NULL); } argc -= c; argv += c; if (strcmp(type, VDEV_TYPE_SPARE) == 0) { spares = child; nspares = children; continue; } else { verify(nvlist_alloc(&nv, NV_UNIQUE_NAME, 0) == 0); verify(nvlist_add_string(nv, ZPOOL_CONFIG_TYPE, type) == 0); if (strcmp(type, VDEV_TYPE_RAIDZ) == 0) { verify(nvlist_add_uint64(nv, ZPOOL_CONFIG_NPARITY, mindev - 1) == 0); } verify(nvlist_add_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, child, children) == 0); for (c = 0; c < children; c++) nvlist_free(child[c]); free(child); } } else { /* * We have a device. Pass off to make_leaf_vdev() to * construct the appropriate nvlist describing the vdev. */ if ((nv = make_leaf_vdev(argv[0])) == NULL) return (NULL); argc--; argv++; } toplevels++; top = realloc(top, toplevels * sizeof (nvlist_t *)); if (top == NULL) zpool_no_memory(); top[toplevels - 1] = nv; } if (toplevels == 0 && nspares == 0) { (void) fprintf(stderr, gettext("invalid vdev " "specification: at least one toplevel vdev must be " "specified\n")); return (NULL); } /* * Finally, create nvroot and add all top-level vdevs to it. */ verify(nvlist_alloc(&nvroot, NV_UNIQUE_NAME, 0) == 0); verify(nvlist_add_string(nvroot, ZPOOL_CONFIG_TYPE, VDEV_TYPE_ROOT) == 0); verify(nvlist_add_nvlist_array(nvroot, ZPOOL_CONFIG_CHILDREN, top, toplevels) == 0); if (nspares != 0) verify(nvlist_add_nvlist_array(nvroot, ZPOOL_CONFIG_SPARES, spares, nspares) == 0); for (t = 0; t < toplevels; t++) nvlist_free(top[t]); for (t = 0; t < nspares; t++) nvlist_free(spares[t]); if (spares) free(spares); free(top); return (nvroot); } /* * Get and validate the contents of the given vdev specification. This ensures * that the nvlist returned is well-formed, that all the devices exist, and that * they are not currently in use by any other known consumer. The 'poolconfig' * parameter is the current configuration of the pool when adding devices * existing pool, and is used to perform additional checks, such as changing the * replication level of the pool. It can be 'NULL' to indicate that this is a * new pool. The 'force' flag controls whether devices should be forcefully * added, even if they appear in use. */ nvlist_t * make_root_vdev(nvlist_t *poolconfig, int force, int check_rep, boolean_t isreplacing, int argc, char **argv) { nvlist_t *newroot; is_force = force; /* * Construct the vdev specification. If this is successful, we know * that we have a valid specification, and that all devices can be * opened. */ if ((newroot = construct_spec(argc, argv)) == NULL) return (NULL); /* * Validate each device to make sure that its not shared with another * subsystem. We do this even if 'force' is set, because there are some * uses (such as a dedicated dump device) that even '-f' cannot * override. */ if (check_in_use(poolconfig, newroot, force, isreplacing, B_FALSE) != 0) { nvlist_free(newroot); return (NULL); } /* * Check the replication level of the given vdevs and report any errors * found. We include the existing pool spec, if any, as we need to * catch changes against the existing replication level. */ if (check_rep && check_replication(poolconfig, newroot) != 0) { nvlist_free(newroot); return (NULL); } /* * Run through the vdev specification and label any whole disks found. */ if (make_disks(newroot) != 0) { nvlist_free(newroot); return (NULL); } return (newroot); }