/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2011, 2015 by Delphix. All rights reserved. * Copyright (c) 2012 by Frederik Wessels. All rights reserved. * Copyright (c) 2013 by Prasad Joshi (sTec). All rights reserved. * Copyright 2016 Igor Kozhukhov . * Copyright 2016 Nexenta Systems, Inc. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "zpool_util.h" #include "zfs_comutil.h" #include "zfeature_common.h" #include "statcommon.h" static int zpool_do_create(int, char **); static int zpool_do_destroy(int, char **); static int zpool_do_add(int, char **); static int zpool_do_remove(int, char **); static int zpool_do_labelclear(int, char **); static int zpool_do_list(int, char **); static int zpool_do_iostat(int, char **); static int zpool_do_status(int, char **); static int zpool_do_online(int, char **); static int zpool_do_offline(int, char **); static int zpool_do_clear(int, char **); static int zpool_do_reopen(int, char **); static int zpool_do_reguid(int, char **); static int zpool_do_attach(int, char **); static int zpool_do_detach(int, char **); static int zpool_do_replace(int, char **); static int zpool_do_split(int, char **); static int zpool_do_scrub(int, char **); static int zpool_do_import(int, char **); static int zpool_do_export(int, char **); static int zpool_do_upgrade(int, char **); static int zpool_do_history(int, char **); static int zpool_do_get(int, char **); static int zpool_do_set(int, char **); /* * These libumem hooks provide a reasonable set of defaults for the allocator's * debugging facilities. */ #ifdef DEBUG const char * _umem_debug_init(void) { return ("default,verbose"); /* $UMEM_DEBUG setting */ } const char * _umem_logging_init(void) { return ("fail,contents"); /* $UMEM_LOGGING setting */ } #endif typedef enum { HELP_ADD, HELP_ATTACH, HELP_CLEAR, HELP_CREATE, HELP_DESTROY, HELP_DETACH, HELP_EXPORT, HELP_HISTORY, HELP_IMPORT, HELP_IOSTAT, HELP_LABELCLEAR, HELP_LIST, HELP_OFFLINE, HELP_ONLINE, HELP_REPLACE, HELP_REMOVE, HELP_SCRUB, HELP_STATUS, HELP_UPGRADE, HELP_GET, HELP_SET, HELP_SPLIT, HELP_REGUID, HELP_REOPEN } zpool_help_t; typedef struct zpool_command { const char *name; int (*func)(int, char **); zpool_help_t usage; } zpool_command_t; /* * Master command table. Each ZFS command has a name, associated function, and * usage message. The usage messages need to be internationalized, so we have * to have a function to return the usage message based on a command index. * * These commands are organized according to how they are displayed in the usage * message. An empty command (one with a NULL name) indicates an empty line in * the generic usage message. */ static zpool_command_t command_table[] = { { "create", zpool_do_create, HELP_CREATE }, { "destroy", zpool_do_destroy, HELP_DESTROY }, { NULL }, { "add", zpool_do_add, HELP_ADD }, { "remove", zpool_do_remove, HELP_REMOVE }, { NULL }, { "labelclear", zpool_do_labelclear, HELP_LABELCLEAR }, { NULL }, { "list", zpool_do_list, HELP_LIST }, { "iostat", zpool_do_iostat, HELP_IOSTAT }, { "status", zpool_do_status, HELP_STATUS }, { NULL }, { "online", zpool_do_online, HELP_ONLINE }, { "offline", zpool_do_offline, HELP_OFFLINE }, { "clear", zpool_do_clear, HELP_CLEAR }, { "reopen", zpool_do_reopen, HELP_REOPEN }, { NULL }, { "attach", zpool_do_attach, HELP_ATTACH }, { "detach", zpool_do_detach, HELP_DETACH }, { "replace", zpool_do_replace, HELP_REPLACE }, { "split", zpool_do_split, HELP_SPLIT }, { NULL }, { "scrub", zpool_do_scrub, HELP_SCRUB }, { NULL }, { "import", zpool_do_import, HELP_IMPORT }, { "export", zpool_do_export, HELP_EXPORT }, { "upgrade", zpool_do_upgrade, HELP_UPGRADE }, { "reguid", zpool_do_reguid, HELP_REGUID }, { NULL }, { "history", zpool_do_history, HELP_HISTORY }, { "get", zpool_do_get, HELP_GET }, { "set", zpool_do_set, HELP_SET }, }; #define NCOMMAND (sizeof (command_table) / sizeof (command_table[0])) static zpool_command_t *current_command; static char history_str[HIS_MAX_RECORD_LEN]; static boolean_t log_history = B_TRUE; static uint_t timestamp_fmt = NODATE; static const char * get_usage(zpool_help_t idx) { switch (idx) { case HELP_ADD: return (gettext("\tadd [-fn] ...\n")); case HELP_ATTACH: return (gettext("\tattach [-f] " "\n")); case HELP_CLEAR: return (gettext("\tclear [-nF] [device]\n")); case HELP_CREATE: return (gettext("\tcreate [-fnd] [-o property=value] ... \n" "\t [-O file-system-property=value] ... \n" "\t [-m mountpoint] [-R root] ...\n")); case HELP_DESTROY: return (gettext("\tdestroy [-f] \n")); case HELP_DETACH: return (gettext("\tdetach \n")); case HELP_EXPORT: return (gettext("\texport [-f] ...\n")); case HELP_HISTORY: return (gettext("\thistory [-il] [] ...\n")); case HELP_IMPORT: return (gettext("\timport [-d dir] [-D]\n" "\timport [-d dir | -c cachefile] [-F [-n]] \n" "\timport [-o mntopts] [-o property=value] ... \n" "\t [-d dir | -c cachefile] [-D] [-f] [-m] [-N] " "[-R root] [-F [-n]] -a\n" "\timport [-o mntopts] [-o property=value] ... \n" "\t [-d dir | -c cachefile] [-D] [-f] [-m] [-N] " "[-R root] [-F [-n]]\n" "\t [newpool]\n")); case HELP_IOSTAT: return (gettext("\tiostat [-v] [-T d|u] [pool] ... [interval " "[count]]\n")); case HELP_LABELCLEAR: return (gettext("\tlabelclear [-f] \n")); case HELP_LIST: return (gettext("\tlist [-Hp] [-o property[,...]] " "[-T d|u] [pool] ... [interval [count]]\n")); case HELP_OFFLINE: return (gettext("\toffline [-t] ...\n")); case HELP_ONLINE: return (gettext("\tonline ...\n")); case HELP_REPLACE: return (gettext("\treplace [-f] " "[new-device]\n")); case HELP_REMOVE: return (gettext("\tremove ...\n")); case HELP_REOPEN: return (gettext("\treopen \n")); case HELP_SCRUB: return (gettext("\tscrub [-s] ...\n")); case HELP_STATUS: return (gettext("\tstatus [-vx] [-T d|u] [pool] ... [interval " "[count]]\n")); case HELP_UPGRADE: return (gettext("\tupgrade\n" "\tupgrade -v\n" "\tupgrade [-V version] <-a | pool ...>\n")); case HELP_GET: return (gettext("\tget [-Hp] [-o \"all\" | field[,...]] " "<\"all\" | property[,...]> ...\n")); case HELP_SET: return (gettext("\tset \n")); case HELP_SPLIT: return (gettext("\tsplit [-n] [-R altroot] [-o mntopts]\n" "\t [-o property=value] " "[ ...]\n")); case HELP_REGUID: return (gettext("\treguid \n")); } abort(); /* NOTREACHED */ } /* * Callback routine that will print out a pool property value. */ static int print_prop_cb(int prop, void *cb) { FILE *fp = cb; (void) fprintf(fp, "\t%-15s ", zpool_prop_to_name(prop)); if (zpool_prop_readonly(prop)) (void) fprintf(fp, " NO "); else (void) fprintf(fp, " YES "); if (zpool_prop_values(prop) == NULL) (void) fprintf(fp, "-\n"); else (void) fprintf(fp, "%s\n", zpool_prop_values(prop)); return (ZPROP_CONT); } /* * Display usage message. If we're inside a command, display only the usage for * that command. Otherwise, iterate over the entire command table and display * a complete usage message. */ void usage(boolean_t requested) { FILE *fp = requested ? stdout : stderr; if (current_command == NULL) { int i; (void) fprintf(fp, gettext("usage: zpool command args ...\n")); (void) fprintf(fp, gettext("where 'command' is one of the following:\n\n")); for (i = 0; i < NCOMMAND; i++) { if (command_table[i].name == NULL) (void) fprintf(fp, "\n"); else (void) fprintf(fp, "%s", get_usage(command_table[i].usage)); } } else { (void) fprintf(fp, gettext("usage:\n")); (void) fprintf(fp, "%s", get_usage(current_command->usage)); } if (current_command != NULL && ((strcmp(current_command->name, "set") == 0) || (strcmp(current_command->name, "get") == 0) || (strcmp(current_command->name, "list") == 0))) { (void) fprintf(fp, gettext("\nthe following properties are supported:\n")); (void) fprintf(fp, "\n\t%-15s %s %s\n\n", "PROPERTY", "EDIT", "VALUES"); /* Iterate over all properties */ (void) zprop_iter(print_prop_cb, fp, B_FALSE, B_TRUE, ZFS_TYPE_POOL); (void) fprintf(fp, "\t%-15s ", "feature@..."); (void) fprintf(fp, "YES disabled | enabled | active\n"); (void) fprintf(fp, gettext("\nThe feature@ properties must be " "appended with a feature name.\nSee zpool-features(5).\n")); } /* * See comments at end of main(). */ if (getenv("ZFS_ABORT") != NULL) { (void) printf("dumping core by request\n"); abort(); } exit(requested ? 0 : 2); } void print_vdev_tree(zpool_handle_t *zhp, const char *name, nvlist_t *nv, int indent, boolean_t print_logs) { nvlist_t **child; uint_t c, children; char *vname; if (name != NULL) (void) printf("\t%*s%s\n", indent, "", name); if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, &child, &children) != 0) return; for (c = 0; c < children; c++) { uint64_t is_log = B_FALSE; (void) nvlist_lookup_uint64(child[c], ZPOOL_CONFIG_IS_LOG, &is_log); if ((is_log && !print_logs) || (!is_log && print_logs)) continue; vname = zpool_vdev_name(g_zfs, zhp, child[c], B_FALSE); print_vdev_tree(zhp, vname, child[c], indent + 2, B_FALSE); free(vname); } } static boolean_t prop_list_contains_feature(nvlist_t *proplist) { nvpair_t *nvp; for (nvp = nvlist_next_nvpair(proplist, NULL); NULL != nvp; nvp = nvlist_next_nvpair(proplist, nvp)) { if (zpool_prop_feature(nvpair_name(nvp))) return (B_TRUE); } return (B_FALSE); } /* * Add a property pair (name, string-value) into a property nvlist. */ static int add_prop_list(const char *propname, char *propval, nvlist_t **props, boolean_t poolprop) { zpool_prop_t prop = ZPROP_INVAL; zfs_prop_t fprop; nvlist_t *proplist; const char *normnm; char *strval; if (*props == NULL && nvlist_alloc(props, NV_UNIQUE_NAME, 0) != 0) { (void) fprintf(stderr, gettext("internal error: out of memory\n")); return (1); } proplist = *props; if (poolprop) { const char *vname = zpool_prop_to_name(ZPOOL_PROP_VERSION); if ((prop = zpool_name_to_prop(propname)) == ZPROP_INVAL && !zpool_prop_feature(propname)) { (void) fprintf(stderr, gettext("property '%s' is " "not a valid pool property\n"), propname); return (2); } /* * feature@ properties and version should not be specified * at the same time. */ if ((prop == ZPROP_INVAL && zpool_prop_feature(propname) && nvlist_exists(proplist, vname)) || (prop == ZPOOL_PROP_VERSION && prop_list_contains_feature(proplist))) { (void) fprintf(stderr, gettext("'feature@' and " "'version' properties cannot be specified " "together\n")); return (2); } if (zpool_prop_feature(propname)) normnm = propname; else normnm = zpool_prop_to_name(prop); } else { if ((fprop = zfs_name_to_prop(propname)) != ZPROP_INVAL) { normnm = zfs_prop_to_name(fprop); } else { normnm = propname; } } if (nvlist_lookup_string(proplist, normnm, &strval) == 0 && prop != ZPOOL_PROP_CACHEFILE) { (void) fprintf(stderr, gettext("property '%s' " "specified multiple times\n"), propname); return (2); } if (nvlist_add_string(proplist, normnm, propval) != 0) { (void) fprintf(stderr, gettext("internal " "error: out of memory\n")); return (1); } return (0); } /* * zpool add [-fn] ... * * -f Force addition of devices, even if they appear in use * -n Do not add the devices, but display the resulting layout if * they were to be added. * * Adds the given vdevs to 'pool'. As with create, the bulk of this work is * handled by get_vdev_spec(), which constructs the nvlist needed to pass to * libzfs. */ int zpool_do_add(int argc, char **argv) { boolean_t force = B_FALSE; boolean_t dryrun = B_FALSE; int c; nvlist_t *nvroot; char *poolname; int ret; zpool_handle_t *zhp; nvlist_t *config; /* check options */ while ((c = getopt(argc, argv, "fn")) != -1) { switch (c) { case 'f': force = B_TRUE; break; case 'n': dryrun = B_TRUE; break; case '?': (void) fprintf(stderr, gettext("invalid option '%c'\n"), optopt); usage(B_FALSE); } } argc -= optind; argv += optind; /* get pool name and check number of arguments */ if (argc < 1) { (void) fprintf(stderr, gettext("missing pool name argument\n")); usage(B_FALSE); } if (argc < 2) { (void) fprintf(stderr, gettext("missing vdev specification\n")); usage(B_FALSE); } poolname = argv[0]; argc--; argv++; if ((zhp = zpool_open(g_zfs, poolname)) == NULL) return (1); if ((config = zpool_get_config(zhp, NULL)) == NULL) { (void) fprintf(stderr, gettext("pool '%s' is unavailable\n"), poolname); zpool_close(zhp); return (1); } /* pass off to get_vdev_spec for processing */ nvroot = make_root_vdev(zhp, force, !force, B_FALSE, dryrun, argc, argv); if (nvroot == NULL) { zpool_close(zhp); return (1); } if (dryrun) { nvlist_t *poolnvroot; verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, &poolnvroot) == 0); (void) printf(gettext("would update '%s' to the following " "configuration:\n"), zpool_get_name(zhp)); /* print original main pool and new tree */ print_vdev_tree(zhp, poolname, poolnvroot, 0, B_FALSE); print_vdev_tree(zhp, NULL, nvroot, 0, B_FALSE); /* Do the same for the logs */ if (num_logs(poolnvroot) > 0) { print_vdev_tree(zhp, "logs", poolnvroot, 0, B_TRUE); print_vdev_tree(zhp, NULL, nvroot, 0, B_TRUE); } else if (num_logs(nvroot) > 0) { print_vdev_tree(zhp, "logs", nvroot, 0, B_TRUE); } ret = 0; } else { ret = (zpool_add(zhp, nvroot) != 0); } nvlist_free(nvroot); zpool_close(zhp); return (ret); } /* * zpool remove ... * * Removes the given vdev from the pool. Currently, this supports removing * spares, cache, and log devices from the pool. */ int zpool_do_remove(int argc, char **argv) { char *poolname; int i, ret = 0; zpool_handle_t *zhp; argc--; argv++; /* get pool name and check number of arguments */ if (argc < 1) { (void) fprintf(stderr, gettext("missing pool name argument\n")); usage(B_FALSE); } if (argc < 2) { (void) fprintf(stderr, gettext("missing device\n")); usage(B_FALSE); } poolname = argv[0]; if ((zhp = zpool_open(g_zfs, poolname)) == NULL) return (1); for (i = 1; i < argc; i++) { if (zpool_vdev_remove(zhp, argv[i]) != 0) ret = 1; } return (ret); } /* * zpool labelclear [-f] * * -f Force clearing the label for the vdevs which are members of * the exported or foreign pools. * * Verifies that the vdev is not active and zeros out the label information * on the device. */ int zpool_do_labelclear(int argc, char **argv) { char vdev[MAXPATHLEN]; char *name = NULL; struct stat st; int c, fd, ret = 0; nvlist_t *config; pool_state_t state; boolean_t inuse = B_FALSE; boolean_t force = B_FALSE; /* check options */ while ((c = getopt(argc, argv, "f")) != -1) { switch (c) { case 'f': force = B_TRUE; break; default: (void) fprintf(stderr, gettext("invalid option '%c'\n"), optopt); usage(B_FALSE); } } argc -= optind; argv += optind; /* get vdev name */ if (argc < 1) { (void) fprintf(stderr, gettext("missing vdev name\n")); usage(B_FALSE); } if (argc > 1) { (void) fprintf(stderr, gettext("too many arguments\n")); usage(B_FALSE); } /* * Check if we were given absolute path and use it as is. * Otherwise if the provided vdev name doesn't point to a file, * try prepending dsk path and appending s0. */ (void) strlcpy(vdev, argv[0], sizeof (vdev)); if (vdev[0] != '/' && stat(vdev, &st) != 0) { char *s; (void) snprintf(vdev, sizeof (vdev), "%s/%s", ZFS_DISK_ROOT, argv[0]); if ((s = strrchr(argv[0], 's')) == NULL || !isdigit(*(s + 1))) (void) strlcat(vdev, "s0", sizeof (vdev)); if (stat(vdev, &st) != 0) { (void) fprintf(stderr, gettext( "failed to find device %s, try specifying absolute " "path instead\n"), argv[0]); return (1); } } if ((fd = open(vdev, O_RDWR)) < 0) { (void) fprintf(stderr, gettext("failed to open %s: %s\n"), vdev, strerror(errno)); return (1); } if (zpool_read_label(fd, &config) != 0 || config == NULL) { (void) fprintf(stderr, gettext("failed to read label from %s\n"), vdev); return (1); } nvlist_free(config); ret = zpool_in_use(g_zfs, fd, &state, &name, &inuse); if (ret != 0) { (void) fprintf(stderr, gettext("failed to check state for %s\n"), vdev); return (1); } if (!inuse) goto wipe_label; switch (state) { default: case POOL_STATE_ACTIVE: case POOL_STATE_SPARE: case POOL_STATE_L2CACHE: (void) fprintf(stderr, gettext( "%s is a member (%s) of pool \"%s\"\n"), vdev, zpool_pool_state_to_name(state), name); ret = 1; goto errout; case POOL_STATE_EXPORTED: if (force) break; (void) fprintf(stderr, gettext( "use '-f' to override the following error:\n" "%s is a member of exported pool \"%s\"\n"), vdev, name); ret = 1; goto errout; case POOL_STATE_POTENTIALLY_ACTIVE: if (force) break; (void) fprintf(stderr, gettext( "use '-f' to override the following error:\n" "%s is a member of potentially active pool \"%s\"\n"), vdev, name); ret = 1; goto errout; case POOL_STATE_DESTROYED: /* inuse should never be set for a destroyed pool */ assert(0); break; } wipe_label: ret = zpool_clear_label(fd); if (ret != 0) { (void) fprintf(stderr, gettext("failed to clear label for %s\n"), vdev); } errout: free(name); (void) close(fd); return (ret); } /* * zpool create [-fnd] [-o property=value] ... * [-O file-system-property=value] ... * [-R root] [-m mountpoint] ... * * -f Force creation, even if devices appear in use * -n Do not create the pool, but display the resulting layout if it * were to be created. * -R Create a pool under an alternate root * -m Set default mountpoint for the root dataset. By default it's * '/' * -o Set property=value. * -d Don't automatically enable all supported pool features * (individual features can be enabled with -o). * -O Set fsproperty=value in the pool's root file system * * Creates the named pool according to the given vdev specification. The * bulk of the vdev processing is done in get_vdev_spec() in zpool_vdev.c. Once * we get the nvlist back from get_vdev_spec(), we either print out the contents * (if '-n' was specified), or pass it to libzfs to do the creation. */ int zpool_do_create(int argc, char **argv) { boolean_t force = B_FALSE; boolean_t dryrun = B_FALSE; boolean_t enable_all_pool_feat = B_TRUE; int c; nvlist_t *nvroot = NULL; char *poolname; int ret = 1; char *altroot = NULL; char *mountpoint = NULL; nvlist_t *fsprops = NULL; nvlist_t *props = NULL; char *propval; /* check options */ while ((c = getopt(argc, argv, ":fndR:m:o:O:")) != -1) { switch (c) { case 'f': force = B_TRUE; break; case 'n': dryrun = B_TRUE; break; case 'd': enable_all_pool_feat = B_FALSE; break; case 'R': altroot = optarg; if (add_prop_list(zpool_prop_to_name( ZPOOL_PROP_ALTROOT), optarg, &props, B_TRUE)) goto errout; if (nvlist_lookup_string(props, zpool_prop_to_name(ZPOOL_PROP_CACHEFILE), &propval) == 0) break; if (add_prop_list(zpool_prop_to_name( ZPOOL_PROP_CACHEFILE), "none", &props, B_TRUE)) goto errout; break; case 'm': /* Equivalent to -O mountpoint=optarg */ mountpoint = optarg; break; case 'o': if ((propval = strchr(optarg, '=')) == NULL) { (void) fprintf(stderr, gettext("missing " "'=' for -o option\n")); goto errout; } *propval = '\0'; propval++; if (add_prop_list(optarg, propval, &props, B_TRUE)) goto errout; /* * If the user is creating a pool that doesn't support * feature flags, don't enable any features. */ if (zpool_name_to_prop(optarg) == ZPOOL_PROP_VERSION) { char *end; u_longlong_t ver; ver = strtoull(propval, &end, 10); if (*end == '\0' && ver < SPA_VERSION_FEATURES) { enable_all_pool_feat = B_FALSE; } } if (zpool_name_to_prop(optarg) == ZPOOL_PROP_ALTROOT) altroot = propval; break; case 'O': if ((propval = strchr(optarg, '=')) == NULL) { (void) fprintf(stderr, gettext("missing " "'=' for -O option\n")); goto errout; } *propval = '\0'; propval++; /* * Mountpoints are checked and then added later. * Uniquely among properties, they can be specified * more than once, to avoid conflict with -m. */ if (0 == strcmp(optarg, zfs_prop_to_name(ZFS_PROP_MOUNTPOINT))) { mountpoint = propval; } else if (add_prop_list(optarg, propval, &fsprops, B_FALSE)) { goto errout; } break; case ':': (void) fprintf(stderr, gettext("missing argument for " "'%c' option\n"), optopt); goto badusage; case '?': (void) fprintf(stderr, gettext("invalid option '%c'\n"), optopt); goto badusage; } } argc -= optind; argv += optind; /* get pool name and check number of arguments */ if (argc < 1) { (void) fprintf(stderr, gettext("missing pool name argument\n")); goto badusage; } if (argc < 2) { (void) fprintf(stderr, gettext("missing vdev specification\n")); goto badusage; } poolname = argv[0]; /* * As a special case, check for use of '/' in the name, and direct the * user to use 'zfs create' instead. */ if (strchr(poolname, '/') != NULL) { (void) fprintf(stderr, gettext("cannot create '%s': invalid " "character '/' in pool name\n"), poolname); (void) fprintf(stderr, gettext("use 'zfs create' to " "create a dataset\n")); goto errout; } /* pass off to get_vdev_spec for bulk processing */ nvroot = make_root_vdev(NULL, force, !force, B_FALSE, dryrun, argc - 1, argv + 1); if (nvroot == NULL) goto errout; /* make_root_vdev() allows 0 toplevel children if there are spares */ if (!zfs_allocatable_devs(nvroot)) { (void) fprintf(stderr, gettext("invalid vdev " "specification: at least one toplevel vdev must be " "specified\n")); goto errout; } if (altroot != NULL && altroot[0] != '/') { (void) fprintf(stderr, gettext("invalid alternate root '%s': " "must be an absolute path\n"), altroot); goto errout; } /* * Check the validity of the mountpoint and direct the user to use the * '-m' mountpoint option if it looks like its in use. */ if (mountpoint == NULL || (strcmp(mountpoint, ZFS_MOUNTPOINT_LEGACY) != 0 && strcmp(mountpoint, ZFS_MOUNTPOINT_NONE) != 0)) { char buf[MAXPATHLEN]; DIR *dirp; if (mountpoint && mountpoint[0] != '/') { (void) fprintf(stderr, gettext("invalid mountpoint " "'%s': must be an absolute path, 'legacy', or " "'none'\n"), mountpoint); goto errout; } if (mountpoint == NULL) { if (altroot != NULL) (void) snprintf(buf, sizeof (buf), "%s/%s", altroot, poolname); else (void) snprintf(buf, sizeof (buf), "/%s", poolname); } else { if (altroot != NULL) (void) snprintf(buf, sizeof (buf), "%s%s", altroot, mountpoint); else (void) snprintf(buf, sizeof (buf), "%s", mountpoint); } if ((dirp = opendir(buf)) == NULL && errno != ENOENT) { (void) fprintf(stderr, gettext("mountpoint '%s' : " "%s\n"), buf, strerror(errno)); (void) fprintf(stderr, gettext("use '-m' " "option to provide a different default\n")); goto errout; } else if (dirp) { int count = 0; while (count < 3 && readdir(dirp) != NULL) count++; (void) closedir(dirp); if (count > 2) { (void) fprintf(stderr, gettext("mountpoint " "'%s' exists and is not empty\n"), buf); (void) fprintf(stderr, gettext("use '-m' " "option to provide a " "different default\n")); goto errout; } } } /* * Now that the mountpoint's validity has been checked, ensure that * the property is set appropriately prior to creating the pool. */ if (mountpoint != NULL) { ret = add_prop_list(zfs_prop_to_name(ZFS_PROP_MOUNTPOINT), mountpoint, &fsprops, B_FALSE); if (ret != 0) goto errout; } ret = 1; if (dryrun) { /* * For a dry run invocation, print out a basic message and run * through all the vdevs in the list and print out in an * appropriate hierarchy. */ (void) printf(gettext("would create '%s' with the " "following layout:\n\n"), poolname); print_vdev_tree(NULL, poolname, nvroot, 0, B_FALSE); if (num_logs(nvroot) > 0) print_vdev_tree(NULL, "logs", nvroot, 0, B_TRUE); ret = 0; } else { /* * Hand off to libzfs. */ if (enable_all_pool_feat) { spa_feature_t i; for (i = 0; i < SPA_FEATURES; i++) { char propname[MAXPATHLEN]; zfeature_info_t *feat = &spa_feature_table[i]; (void) snprintf(propname, sizeof (propname), "feature@%s", feat->fi_uname); /* * Skip feature if user specified it manually * on the command line. */ if (nvlist_exists(props, propname)) continue; ret = add_prop_list(propname, ZFS_FEATURE_ENABLED, &props, B_TRUE); if (ret != 0) goto errout; } } ret = 1; if (zpool_create(g_zfs, poolname, nvroot, props, fsprops) == 0) { zfs_handle_t *pool = zfs_open(g_zfs, poolname, ZFS_TYPE_FILESYSTEM); if (pool != NULL) { if (zfs_mount(pool, NULL, 0) == 0) ret = zfs_shareall(pool); zfs_close(pool); } } else if (libzfs_errno(g_zfs) == EZFS_INVALIDNAME) { (void) fprintf(stderr, gettext("pool name may have " "been omitted\n")); } } errout: nvlist_free(nvroot); nvlist_free(fsprops); nvlist_free(props); return (ret); badusage: nvlist_free(fsprops); nvlist_free(props); usage(B_FALSE); return (2); } /* * zpool destroy * * -f Forcefully unmount any datasets * * Destroy the given pool. Automatically unmounts any datasets in the pool. */ int zpool_do_destroy(int argc, char **argv) { boolean_t force = B_FALSE; int c; char *pool; zpool_handle_t *zhp; int ret; /* check options */ while ((c = getopt(argc, argv, "f")) != -1) { switch (c) { case 'f': force = B_TRUE; break; case '?': (void) fprintf(stderr, gettext("invalid option '%c'\n"), optopt); usage(B_FALSE); } } argc -= optind; argv += optind; /* check arguments */ if (argc < 1) { (void) fprintf(stderr, gettext("missing pool argument\n")); usage(B_FALSE); } if (argc > 1) { (void) fprintf(stderr, gettext("too many arguments\n")); usage(B_FALSE); } pool = argv[0]; if ((zhp = zpool_open_canfail(g_zfs, pool)) == NULL) { /* * As a special case, check for use of '/' in the name, and * direct the user to use 'zfs destroy' instead. */ if (strchr(pool, '/') != NULL) (void) fprintf(stderr, gettext("use 'zfs destroy' to " "destroy a dataset\n")); return (1); } if (zpool_disable_datasets(zhp, force) != 0) { (void) fprintf(stderr, gettext("could not destroy '%s': " "could not unmount datasets\n"), zpool_get_name(zhp)); return (1); } /* The history must be logged as part of the export */ log_history = B_FALSE; ret = (zpool_destroy(zhp, history_str) != 0); zpool_close(zhp); return (ret); } /* * zpool export [-f] ... * * -f Forcefully unmount datasets * * Export the given pools. By default, the command will attempt to cleanly * unmount any active datasets within the pool. If the '-f' flag is specified, * then the datasets will be forcefully unmounted. */ int zpool_do_export(int argc, char **argv) { boolean_t force = B_FALSE; boolean_t hardforce = B_FALSE; int c; zpool_handle_t *zhp; int ret; int i; /* check options */ while ((c = getopt(argc, argv, "fF")) != -1) { switch (c) { case 'f': force = B_TRUE; break; case 'F': hardforce = B_TRUE; break; case '?': (void) fprintf(stderr, gettext("invalid option '%c'\n"), optopt); usage(B_FALSE); } } argc -= optind; argv += optind; /* check arguments */ if (argc < 1) { (void) fprintf(stderr, gettext("missing pool argument\n")); usage(B_FALSE); } ret = 0; for (i = 0; i < argc; i++) { if ((zhp = zpool_open_canfail(g_zfs, argv[i])) == NULL) { ret = 1; continue; } if (zpool_disable_datasets(zhp, force) != 0) { ret = 1; zpool_close(zhp); continue; } /* The history must be logged as part of the export */ log_history = B_FALSE; if (hardforce) { if (zpool_export_force(zhp, history_str) != 0) ret = 1; } else if (zpool_export(zhp, force, history_str) != 0) { ret = 1; } zpool_close(zhp); } return (ret); } /* * Given a vdev configuration, determine the maximum width needed for the device * name column. */ static int max_width(zpool_handle_t *zhp, nvlist_t *nv, int depth, int max) { char *name = zpool_vdev_name(g_zfs, zhp, nv, B_TRUE); nvlist_t **child; uint_t c, children; int ret; if (strlen(name) + depth > max) max = strlen(name) + depth; free(name); if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_SPARES, &child, &children) == 0) { for (c = 0; c < children; c++) if ((ret = max_width(zhp, child[c], depth + 2, max)) > max) max = ret; } if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_L2CACHE, &child, &children) == 0) { for (c = 0; c < children; c++) if ((ret = max_width(zhp, child[c], depth + 2, max)) > max) max = ret; } if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, &child, &children) == 0) { for (c = 0; c < children; c++) if ((ret = max_width(zhp, child[c], depth + 2, max)) > max) max = ret; } return (max); } typedef struct spare_cbdata { uint64_t cb_guid; zpool_handle_t *cb_zhp; } spare_cbdata_t; static boolean_t find_vdev(nvlist_t *nv, uint64_t search) { uint64_t guid; nvlist_t **child; uint_t c, children; if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_GUID, &guid) == 0 && search == guid) return (B_TRUE); if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, &child, &children) == 0) { for (c = 0; c < children; c++) if (find_vdev(child[c], search)) return (B_TRUE); } return (B_FALSE); } static int find_spare(zpool_handle_t *zhp, void *data) { spare_cbdata_t *cbp = data; nvlist_t *config, *nvroot; config = zpool_get_config(zhp, NULL); verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, &nvroot) == 0); if (find_vdev(nvroot, cbp->cb_guid)) { cbp->cb_zhp = zhp; return (1); } zpool_close(zhp); return (0); } /* * Print out configuration state as requested by status_callback. */ void print_status_config(zpool_handle_t *zhp, const char *name, nvlist_t *nv, int namewidth, int depth, boolean_t isspare) { nvlist_t **child; uint_t c, children; pool_scan_stat_t *ps = NULL; vdev_stat_t *vs; char rbuf[6], wbuf[6], cbuf[6]; char *vname; uint64_t notpresent; spare_cbdata_t cb; const char *state; if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, &child, &children) != 0) children = 0; verify(nvlist_lookup_uint64_array(nv, ZPOOL_CONFIG_VDEV_STATS, (uint64_t **)&vs, &c) == 0); state = zpool_state_to_name(vs->vs_state, vs->vs_aux); if (isspare) { /* * For hot spares, we use the terms 'INUSE' and 'AVAILABLE' for * online drives. */ if (vs->vs_aux == VDEV_AUX_SPARED) state = "INUSE"; else if (vs->vs_state == VDEV_STATE_HEALTHY) state = "AVAIL"; } (void) printf("\t%*s%-*s %-8s", depth, "", namewidth - depth, name, state); if (!isspare) { zfs_nicenum(vs->vs_read_errors, rbuf, sizeof (rbuf)); zfs_nicenum(vs->vs_write_errors, wbuf, sizeof (wbuf)); zfs_nicenum(vs->vs_checksum_errors, cbuf, sizeof (cbuf)); (void) printf(" %5s %5s %5s", rbuf, wbuf, cbuf); } if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_NOT_PRESENT, ¬present) == 0) { char *path; verify(nvlist_lookup_string(nv, ZPOOL_CONFIG_PATH, &path) == 0); (void) printf(" was %s", path); } else if (vs->vs_aux != 0) { (void) printf(" "); switch (vs->vs_aux) { case VDEV_AUX_OPEN_FAILED: (void) printf(gettext("cannot open")); break; case VDEV_AUX_BAD_GUID_SUM: (void) printf(gettext("missing device")); break; case VDEV_AUX_NO_REPLICAS: (void) printf(gettext("insufficient replicas")); break; case VDEV_AUX_VERSION_NEWER: (void) printf(gettext("newer version")); break; case VDEV_AUX_UNSUP_FEAT: (void) printf(gettext("unsupported feature(s)")); break; case VDEV_AUX_SPARED: verify(nvlist_lookup_uint64(nv, ZPOOL_CONFIG_GUID, &cb.cb_guid) == 0); if (zpool_iter(g_zfs, find_spare, &cb) == 1) { if (strcmp(zpool_get_name(cb.cb_zhp), zpool_get_name(zhp)) == 0) (void) printf(gettext("currently in " "use")); else (void) printf(gettext("in use by " "pool '%s'"), zpool_get_name(cb.cb_zhp)); zpool_close(cb.cb_zhp); } else { (void) printf(gettext("currently in use")); } break; case VDEV_AUX_ERR_EXCEEDED: (void) printf(gettext("too many errors")); break; case VDEV_AUX_IO_FAILURE: (void) printf(gettext("experienced I/O failures")); break; case VDEV_AUX_BAD_LOG: (void) printf(gettext("bad intent log")); break; case VDEV_AUX_EXTERNAL: (void) printf(gettext("external device fault")); break; case VDEV_AUX_SPLIT_POOL: (void) printf(gettext("split into new pool")); break; default: (void) printf(gettext("corrupted data")); break; } } (void) nvlist_lookup_uint64_array(nv, ZPOOL_CONFIG_SCAN_STATS, (uint64_t **)&ps, &c); if (ps && ps->pss_state == DSS_SCANNING && vs->vs_scan_processed != 0 && children == 0) { (void) printf(gettext(" (%s)"), (ps->pss_func == POOL_SCAN_RESILVER) ? "resilvering" : "repairing"); } (void) printf("\n"); for (c = 0; c < children; c++) { uint64_t islog = B_FALSE, ishole = B_FALSE; /* Don't print logs or holes here */ (void) nvlist_lookup_uint64(child[c], ZPOOL_CONFIG_IS_LOG, &islog); (void) nvlist_lookup_uint64(child[c], ZPOOL_CONFIG_IS_HOLE, &ishole); if (islog || ishole) continue; vname = zpool_vdev_name(g_zfs, zhp, child[c], B_TRUE); print_status_config(zhp, vname, child[c], namewidth, depth + 2, isspare); free(vname); } } /* * Print the configuration of an exported pool. Iterate over all vdevs in the * pool, printing out the name and status for each one. */ void print_import_config(const char *name, nvlist_t *nv, int namewidth, int depth) { nvlist_t **child; uint_t c, children; vdev_stat_t *vs; char *type, *vname; verify(nvlist_lookup_string(nv, ZPOOL_CONFIG_TYPE, &type) == 0); if (strcmp(type, VDEV_TYPE_MISSING) == 0 || strcmp(type, VDEV_TYPE_HOLE) == 0) return; verify(nvlist_lookup_uint64_array(nv, ZPOOL_CONFIG_VDEV_STATS, (uint64_t **)&vs, &c) == 0); (void) printf("\t%*s%-*s", depth, "", namewidth - depth, name); (void) printf(" %s", zpool_state_to_name(vs->vs_state, vs->vs_aux)); if (vs->vs_aux != 0) { (void) printf(" "); switch (vs->vs_aux) { case VDEV_AUX_OPEN_FAILED: (void) printf(gettext("cannot open")); break; case VDEV_AUX_BAD_GUID_SUM: (void) printf(gettext("missing device")); break; case VDEV_AUX_NO_REPLICAS: (void) printf(gettext("insufficient replicas")); break; case VDEV_AUX_VERSION_NEWER: (void) printf(gettext("newer version")); break; case VDEV_AUX_UNSUP_FEAT: (void) printf(gettext("unsupported feature(s)")); break; case VDEV_AUX_ERR_EXCEEDED: (void) printf(gettext("too many errors")); break; default: (void) printf(gettext("corrupted data")); break; } } (void) printf("\n"); if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, &child, &children) != 0) return; for (c = 0; c < children; c++) { uint64_t is_log = B_FALSE; (void) nvlist_lookup_uint64(child[c], ZPOOL_CONFIG_IS_LOG, &is_log); if (is_log) continue; vname = zpool_vdev_name(g_zfs, NULL, child[c], B_TRUE); print_import_config(vname, child[c], namewidth, depth + 2); free(vname); } if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_L2CACHE, &child, &children) == 0) { (void) printf(gettext("\tcache\n")); for (c = 0; c < children; c++) { vname = zpool_vdev_name(g_zfs, NULL, child[c], B_FALSE); (void) printf("\t %s\n", vname); free(vname); } } if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_SPARES, &child, &children) == 0) { (void) printf(gettext("\tspares\n")); for (c = 0; c < children; c++) { vname = zpool_vdev_name(g_zfs, NULL, child[c], B_FALSE); (void) printf("\t %s\n", vname); free(vname); } } } /* * Print log vdevs. * Logs are recorded as top level vdevs in the main pool child array * but with "is_log" set to 1. We use either print_status_config() or * print_import_config() to print the top level logs then any log * children (eg mirrored slogs) are printed recursively - which * works because only the top level vdev is marked "is_log" */ static void print_logs(zpool_handle_t *zhp, nvlist_t *nv, int namewidth, boolean_t verbose) { uint_t c, children; nvlist_t **child; if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, &child, &children) != 0) return; (void) printf(gettext("\tlogs\n")); for (c = 0; c < children; c++) { uint64_t is_log = B_FALSE; char *name; (void) nvlist_lookup_uint64(child[c], ZPOOL_CONFIG_IS_LOG, &is_log); if (!is_log) continue; name = zpool_vdev_name(g_zfs, zhp, child[c], B_TRUE); if (verbose) print_status_config(zhp, name, child[c], namewidth, 2, B_FALSE); else print_import_config(name, child[c], namewidth, 2); free(name); } } /* * Display the status for the given pool. */ static void show_import(nvlist_t *config) { uint64_t pool_state; vdev_stat_t *vs; char *name; uint64_t guid; char *msgid; nvlist_t *nvroot; int reason; const char *health; uint_t vsc; int namewidth; char *comment; verify(nvlist_lookup_string(config, ZPOOL_CONFIG_POOL_NAME, &name) == 0); verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_GUID, &guid) == 0); verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_STATE, &pool_state) == 0); verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, &nvroot) == 0); verify(nvlist_lookup_uint64_array(nvroot, ZPOOL_CONFIG_VDEV_STATS, (uint64_t **)&vs, &vsc) == 0); health = zpool_state_to_name(vs->vs_state, vs->vs_aux); reason = zpool_import_status(config, &msgid); (void) printf(gettext(" pool: %s\n"), name); (void) printf(gettext(" id: %llu\n"), (u_longlong_t)guid); (void) printf(gettext(" state: %s"), health); if (pool_state == POOL_STATE_DESTROYED) (void) printf(gettext(" (DESTROYED)")); (void) printf("\n"); switch (reason) { case ZPOOL_STATUS_MISSING_DEV_R: case ZPOOL_STATUS_MISSING_DEV_NR: case ZPOOL_STATUS_BAD_GUID_SUM: (void) printf(gettext(" status: One or more devices are " "missing from the system.\n")); break; case ZPOOL_STATUS_CORRUPT_LABEL_R: case ZPOOL_STATUS_CORRUPT_LABEL_NR: (void) printf(gettext(" status: One or more devices contains " "corrupted data.\n")); break; case ZPOOL_STATUS_CORRUPT_DATA: (void) printf( gettext(" status: The pool data is corrupted.\n")); break; case ZPOOL_STATUS_OFFLINE_DEV: (void) printf(gettext(" status: One or more devices " "are offlined.\n")); break; case ZPOOL_STATUS_CORRUPT_POOL: (void) printf(gettext(" status: The pool metadata is " "corrupted.\n")); break; case ZPOOL_STATUS_VERSION_OLDER: (void) printf(gettext(" status: The pool is formatted using a " "legacy on-disk version.\n")); break; case ZPOOL_STATUS_VERSION_NEWER: (void) printf(gettext(" status: The pool is formatted using an " "incompatible version.\n")); break; case ZPOOL_STATUS_FEAT_DISABLED: (void) printf(gettext(" status: Some supported features are " "not enabled on the pool.\n")); break; case ZPOOL_STATUS_UNSUP_FEAT_READ: (void) printf(gettext("status: The pool uses the following " "feature(s) not supported on this sytem:\n")); zpool_print_unsup_feat(config); break; case ZPOOL_STATUS_UNSUP_FEAT_WRITE: (void) printf(gettext("status: The pool can only be accessed " "in read-only mode on this system. It\n\tcannot be " "accessed in read-write mode because it uses the " "following\n\tfeature(s) not supported on this system:\n")); zpool_print_unsup_feat(config); break; case ZPOOL_STATUS_HOSTID_MISMATCH: (void) printf(gettext(" status: The pool was last accessed by " "another system.\n")); break; case ZPOOL_STATUS_FAULTED_DEV_R: case ZPOOL_STATUS_FAULTED_DEV_NR: (void) printf(gettext(" status: One or more devices are " "faulted.\n")); break; case ZPOOL_STATUS_BAD_LOG: (void) printf(gettext(" status: An intent log record cannot be " "read.\n")); break; case ZPOOL_STATUS_RESILVERING: (void) printf(gettext(" status: One or more devices were being " "resilvered.\n")); break; default: /* * No other status can be seen when importing pools. */ assert(reason == ZPOOL_STATUS_OK); } /* * Print out an action according to the overall state of the pool. */ if (vs->vs_state == VDEV_STATE_HEALTHY) { if (reason == ZPOOL_STATUS_VERSION_OLDER || reason == ZPOOL_STATUS_FEAT_DISABLED) { (void) printf(gettext(" action: The pool can be " "imported using its name or numeric identifier, " "though\n\tsome features will not be available " "without an explicit 'zpool upgrade'.\n")); } else if (reason == ZPOOL_STATUS_HOSTID_MISMATCH) { (void) printf(gettext(" action: The pool can be " "imported using its name or numeric " "identifier and\n\tthe '-f' flag.\n")); } else { (void) printf(gettext(" action: The pool can be " "imported using its name or numeric " "identifier.\n")); } } else if (vs->vs_state == VDEV_STATE_DEGRADED) { (void) printf(gettext(" action: The pool can be imported " "despite missing or damaged devices. The\n\tfault " "tolerance of the pool may be compromised if imported.\n")); } else { switch (reason) { case ZPOOL_STATUS_VERSION_NEWER: (void) printf(gettext(" action: The pool cannot be " "imported. Access the pool on a system running " "newer\n\tsoftware, or recreate the pool from " "backup.\n")); break; case ZPOOL_STATUS_UNSUP_FEAT_READ: (void) printf(gettext("action: The pool cannot be " "imported. Access the pool on a system that " "supports\n\tthe required feature(s), or recreate " "the pool from backup.\n")); break; case ZPOOL_STATUS_UNSUP_FEAT_WRITE: (void) printf(gettext("action: The pool cannot be " "imported in read-write mode. Import the pool " "with\n" "\t\"-o readonly=on\", access the pool on a system " "that supports the\n\trequired feature(s), or " "recreate the pool from backup.\n")); break; case ZPOOL_STATUS_MISSING_DEV_R: case ZPOOL_STATUS_MISSING_DEV_NR: case ZPOOL_STATUS_BAD_GUID_SUM: (void) printf(gettext(" action: The pool cannot be " "imported. Attach the missing\n\tdevices and try " "again.\n")); break; default: (void) printf(gettext(" action: The pool cannot be " "imported due to damaged devices or data.\n")); } } /* Print the comment attached to the pool. */ if (nvlist_lookup_string(config, ZPOOL_CONFIG_COMMENT, &comment) == 0) (void) printf(gettext("comment: %s\n"), comment); /* * If the state is "closed" or "can't open", and the aux state * is "corrupt data": */ if (((vs->vs_state == VDEV_STATE_CLOSED) || (vs->vs_state == VDEV_STATE_CANT_OPEN)) && (vs->vs_aux == VDEV_AUX_CORRUPT_DATA)) { if (pool_state == POOL_STATE_DESTROYED) (void) printf(gettext("\tThe pool was destroyed, " "but can be imported using the '-Df' flags.\n")); else if (pool_state != POOL_STATE_EXPORTED) (void) printf(gettext("\tThe pool may be active on " "another system, but can be imported using\n\t" "the '-f' flag.\n")); } if (msgid != NULL) (void) printf(gettext(" see: http://illumos.org/msg/%s\n"), msgid); (void) printf(gettext(" config:\n\n")); namewidth = max_width(NULL, nvroot, 0, 0); if (namewidth < 10) namewidth = 10; print_import_config(name, nvroot, namewidth, 0); if (num_logs(nvroot) > 0) print_logs(NULL, nvroot, namewidth, B_FALSE); if (reason == ZPOOL_STATUS_BAD_GUID_SUM) { (void) printf(gettext("\n\tAdditional devices are known to " "be part of this pool, though their\n\texact " "configuration cannot be determined.\n")); } } /* * Perform the import for the given configuration. This passes the heavy * lifting off to zpool_import_props(), and then mounts the datasets contained * within the pool. */ static int do_import(nvlist_t *config, const char *newname, const char *mntopts, nvlist_t *props, int flags) { zpool_handle_t *zhp; char *name; uint64_t state; uint64_t version; verify(nvlist_lookup_string(config, ZPOOL_CONFIG_POOL_NAME, &name) == 0); verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_STATE, &state) == 0); verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_VERSION, &version) == 0); if (!SPA_VERSION_IS_SUPPORTED(version)) { (void) fprintf(stderr, gettext("cannot import '%s': pool " "is formatted using an unsupported ZFS version\n"), name); return (1); } else if (state != POOL_STATE_EXPORTED && !(flags & ZFS_IMPORT_ANY_HOST)) { uint64_t hostid; if (nvlist_lookup_uint64(config, ZPOOL_CONFIG_HOSTID, &hostid) == 0) { if ((unsigned long)hostid != gethostid()) { char *hostname; uint64_t timestamp; time_t t; verify(nvlist_lookup_string(config, ZPOOL_CONFIG_HOSTNAME, &hostname) == 0); verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_TIMESTAMP, ×tamp) == 0); t = timestamp; (void) fprintf(stderr, gettext("cannot import " "'%s': pool may be in use from other " "system, it was last accessed by %s " "(hostid: 0x%lx) on %s"), name, hostname, (unsigned long)hostid, asctime(localtime(&t))); (void) fprintf(stderr, gettext("use '-f' to " "import anyway\n")); return (1); } } else { (void) fprintf(stderr, gettext("cannot import '%s': " "pool may be in use from other system\n"), name); (void) fprintf(stderr, gettext("use '-f' to import " "anyway\n")); return (1); } } if (zpool_import_props(g_zfs, config, newname, props, flags) != 0) return (1); if (newname != NULL) name = (char *)newname; if ((zhp = zpool_open_canfail(g_zfs, name)) == NULL) return (1); if (zpool_get_state(zhp) != POOL_STATE_UNAVAIL && !(flags & ZFS_IMPORT_ONLY) && zpool_enable_datasets(zhp, mntopts, 0) != 0) { zpool_close(zhp); return (1); } zpool_close(zhp); return (0); } /* * zpool import [-d dir] [-D] * import [-o mntopts] [-o prop=value] ... [-R root] [-D] * [-d dir | -c cachefile] [-f] -a * import [-o mntopts] [-o prop=value] ... [-R root] [-D] * [-d dir | -c cachefile] [-f] [-n] [-F] [newpool] * * -c Read pool information from a cachefile instead of searching * devices. * * -d Scan in a specific directory, other than /dev/dsk. More than * one directory can be specified using multiple '-d' options. * * -D Scan for previously destroyed pools or import all or only * specified destroyed pools. * * -R Temporarily import the pool, with all mountpoints relative to * the given root. The pool will remain exported when the machine * is rebooted. * * -V Import even in the presence of faulted vdevs. This is an * intentionally undocumented option for testing purposes, and * treats the pool configuration as complete, leaving any bad * vdevs in the FAULTED state. In other words, it does verbatim * import. * * -f Force import, even if it appears that the pool is active. * * -F Attempt rewind if necessary. * * -n See if rewind would work, but don't actually rewind. * * -N Import the pool but don't mount datasets. * * -T Specify a starting txg to use for import. This option is * intentionally undocumented option for testing purposes. * * -a Import all pools found. * * -o Set property=value and/or temporary mount options (without '='). * * The import command scans for pools to import, and import pools based on pool * name and GUID. The pool can also be renamed as part of the import process. */ int zpool_do_import(int argc, char **argv) { char **searchdirs = NULL; int nsearch = 0; int c; int err = 0; nvlist_t *pools = NULL; boolean_t do_all = B_FALSE; boolean_t do_destroyed = B_FALSE; char *mntopts = NULL; nvpair_t *elem; nvlist_t *config; uint64_t searchguid = 0; char *searchname = NULL; char *propval; nvlist_t *found_config; nvlist_t *policy = NULL; nvlist_t *props = NULL; boolean_t first; int flags = ZFS_IMPORT_NORMAL; uint32_t rewind_policy = ZPOOL_NO_REWIND; boolean_t dryrun = B_FALSE; boolean_t do_rewind = B_FALSE; boolean_t xtreme_rewind = B_FALSE; uint64_t pool_state, txg = -1ULL; char *cachefile = NULL; importargs_t idata = { 0 }; char *endptr; /* check options */ while ((c = getopt(argc, argv, ":aCc:d:DEfFmnNo:rR:T:VX")) != -1) { switch (c) { case 'a': do_all = B_TRUE; break; case 'c': cachefile = optarg; break; case 'd': if (searchdirs == NULL) { searchdirs = safe_malloc(sizeof (char *)); } else { char **tmp = safe_malloc((nsearch + 1) * sizeof (char *)); bcopy(searchdirs, tmp, nsearch * sizeof (char *)); free(searchdirs); searchdirs = tmp; } searchdirs[nsearch++] = optarg; break; case 'D': do_destroyed = B_TRUE; break; case 'f': flags |= ZFS_IMPORT_ANY_HOST; break; case 'F': do_rewind = B_TRUE; break; case 'm': flags |= ZFS_IMPORT_MISSING_LOG; break; case 'n': dryrun = B_TRUE; break; case 'N': flags |= ZFS_IMPORT_ONLY; break; case 'o': if ((propval = strchr(optarg, '=')) != NULL) { *propval = '\0'; propval++; if (add_prop_list(optarg, propval, &props, B_TRUE)) goto error; } else { mntopts = optarg; } break; case 'R': if (add_prop_list(zpool_prop_to_name( ZPOOL_PROP_ALTROOT), optarg, &props, B_TRUE)) goto error; if (nvlist_lookup_string(props, zpool_prop_to_name(ZPOOL_PROP_CACHEFILE), &propval) == 0) break; if (add_prop_list(zpool_prop_to_name( ZPOOL_PROP_CACHEFILE), "none", &props, B_TRUE)) goto error; break; case 'T': errno = 0; txg = strtoull(optarg, &endptr, 0); if (errno != 0 || *endptr != '\0') { (void) fprintf(stderr, gettext("invalid txg value\n")); usage(B_FALSE); } rewind_policy = ZPOOL_DO_REWIND | ZPOOL_EXTREME_REWIND; break; case 'V': flags |= ZFS_IMPORT_VERBATIM; break; case 'X': xtreme_rewind = B_TRUE; break; case ':': (void) fprintf(stderr, gettext("missing argument for " "'%c' option\n"), optopt); usage(B_FALSE); break; case '?': (void) fprintf(stderr, gettext("invalid option '%c'\n"), optopt); usage(B_FALSE); } } argc -= optind; argv += optind; if (cachefile && nsearch != 0) { (void) fprintf(stderr, gettext("-c is incompatible with -d\n")); usage(B_FALSE); } if ((dryrun || xtreme_rewind) && !do_rewind) { (void) fprintf(stderr, gettext("-n or -X only meaningful with -F\n")); usage(B_FALSE); } if (dryrun) rewind_policy = ZPOOL_TRY_REWIND; else if (do_rewind) rewind_policy = ZPOOL_DO_REWIND; if (xtreme_rewind) rewind_policy |= ZPOOL_EXTREME_REWIND; /* In the future, we can capture further policy and include it here */ if (nvlist_alloc(&policy, NV_UNIQUE_NAME, 0) != 0 || nvlist_add_uint64(policy, ZPOOL_REWIND_REQUEST_TXG, txg) != 0 || nvlist_add_uint32(policy, ZPOOL_REWIND_REQUEST, rewind_policy) != 0) goto error; if (searchdirs == NULL) { searchdirs = safe_malloc(sizeof (char *)); searchdirs[0] = ZFS_DISK_ROOT; nsearch = 1; } /* check argument count */ if (do_all) { if (argc != 0) { (void) fprintf(stderr, gettext("too many arguments\n")); usage(B_FALSE); } } else { if (argc > 2) { (void) fprintf(stderr, gettext("too many arguments\n")); usage(B_FALSE); } /* * Check for the SYS_CONFIG privilege. We do this explicitly * here because otherwise any attempt to discover pools will * silently fail. */ if (argc == 0 && !priv_ineffect(PRIV_SYS_CONFIG)) { (void) fprintf(stderr, gettext("cannot " "discover pools: permission denied\n")); free(searchdirs); nvlist_free(policy); return (1); } } /* * Depending on the arguments given, we do one of the following: * * Iterate through all pools and display information about * each one. * * -a Iterate through all pools and try to import each one. * * Find the pool that corresponds to the given GUID/pool * name and import that one. * * -D Above options applies only to destroyed pools. */ if (argc != 0) { char *endptr; errno = 0; searchguid = strtoull(argv[0], &endptr, 10); if (errno != 0 || *endptr != '\0') { searchname = argv[0]; searchguid = 0; } found_config = NULL; /* * User specified a name or guid. Ensure it's unique. */ idata.unique = B_TRUE; } idata.path = searchdirs; idata.paths = nsearch; idata.poolname = searchname; idata.guid = searchguid; idata.cachefile = cachefile; pools = zpool_search_import(g_zfs, &idata); if (pools != NULL && idata.exists && (argc == 1 || strcmp(argv[0], argv[1]) == 0)) { (void) fprintf(stderr, gettext("cannot import '%s': " "a pool with that name already exists\n"), argv[0]); (void) fprintf(stderr, gettext("use the form '%s " " ' to give it a new name\n"), "zpool import"); err = 1; } else if (pools == NULL && idata.exists) { (void) fprintf(stderr, gettext("cannot import '%s': " "a pool with that name is already created/imported,\n"), argv[0]); (void) fprintf(stderr, gettext("and no additional pools " "with that name were found\n")); err = 1; } else if (pools == NULL) { if (argc != 0) { (void) fprintf(stderr, gettext("cannot import '%s': " "no such pool available\n"), argv[0]); } err = 1; } if (err == 1) { free(searchdirs); nvlist_free(policy); return (1); } /* * At this point we have a list of import candidate configs. Even if * we were searching by pool name or guid, we still need to * post-process the list to deal with pool state and possible * duplicate names. */ err = 0; elem = NULL; first = B_TRUE; while ((elem = nvlist_next_nvpair(pools, elem)) != NULL) { verify(nvpair_value_nvlist(elem, &config) == 0); verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_STATE, &pool_state) == 0); if (!do_destroyed && pool_state == POOL_STATE_DESTROYED) continue; if (do_destroyed && pool_state != POOL_STATE_DESTROYED) continue; verify(nvlist_add_nvlist(config, ZPOOL_REWIND_POLICY, policy) == 0); if (argc == 0) { if (first) first = B_FALSE; else if (!do_all) (void) printf("\n"); if (do_all) { err |= do_import(config, NULL, mntopts, props, flags); } else { show_import(config); } } else if (searchname != NULL) { char *name; /* * We are searching for a pool based on name. */ verify(nvlist_lookup_string(config, ZPOOL_CONFIG_POOL_NAME, &name) == 0); if (strcmp(name, searchname) == 0) { if (found_config != NULL) { (void) fprintf(stderr, gettext( "cannot import '%s': more than " "one matching pool\n"), searchname); (void) fprintf(stderr, gettext( "import by numeric ID instead\n")); err = B_TRUE; } found_config = config; } } else { uint64_t guid; /* * Search for a pool by guid. */ verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_GUID, &guid) == 0); if (guid == searchguid) found_config = config; } } /* * If we were searching for a specific pool, verify that we found a * pool, and then do the import. */ if (argc != 0 && err == 0) { if (found_config == NULL) { (void) fprintf(stderr, gettext("cannot import '%s': " "no such pool available\n"), argv[0]); err = B_TRUE; } else { err |= do_import(found_config, argc == 1 ? NULL : argv[1], mntopts, props, flags); } } /* * If we were just looking for pools, report an error if none were * found. */ if (argc == 0 && first) (void) fprintf(stderr, gettext("no pools available to import\n")); error: nvlist_free(props); nvlist_free(pools); nvlist_free(policy); free(searchdirs); return (err ? 1 : 0); } typedef struct iostat_cbdata { boolean_t cb_verbose; int cb_namewidth; int cb_iteration; zpool_list_t *cb_list; } iostat_cbdata_t; static void print_iostat_separator(iostat_cbdata_t *cb) { int i = 0; for (i = 0; i < cb->cb_namewidth; i++) (void) printf("-"); (void) printf(" ----- ----- ----- ----- ----- -----\n"); } static void print_iostat_header(iostat_cbdata_t *cb) { (void) printf("%*s capacity operations bandwidth\n", cb->cb_namewidth, ""); (void) printf("%-*s alloc free read write read write\n", cb->cb_namewidth, "pool"); print_iostat_separator(cb); } /* * Display a single statistic. */ static void print_one_stat(uint64_t value) { char buf[64]; zfs_nicenum(value, buf, sizeof (buf)); (void) printf(" %5s", buf); } /* * Print out all the statistics for the given vdev. This can either be the * toplevel configuration, or called recursively. If 'name' is NULL, then this * is a verbose output, and we don't want to display the toplevel pool stats. */ void print_vdev_stats(zpool_handle_t *zhp, const char *name, nvlist_t *oldnv, nvlist_t *newnv, iostat_cbdata_t *cb, int depth) { nvlist_t **oldchild, **newchild; uint_t c, children; vdev_stat_t *oldvs, *newvs; vdev_stat_t zerovs = { 0 }; uint64_t tdelta; double scale; char *vname; if (oldnv != NULL) { verify(nvlist_lookup_uint64_array(oldnv, ZPOOL_CONFIG_VDEV_STATS, (uint64_t **)&oldvs, &c) == 0); } else { oldvs = &zerovs; } verify(nvlist_lookup_uint64_array(newnv, ZPOOL_CONFIG_VDEV_STATS, (uint64_t **)&newvs, &c) == 0); if (strlen(name) + depth > cb->cb_namewidth) (void) printf("%*s%s", depth, "", name); else (void) printf("%*s%s%*s", depth, "", name, (int)(cb->cb_namewidth - strlen(name) - depth), ""); tdelta = newvs->vs_timestamp - oldvs->vs_timestamp; if (tdelta == 0) scale = 1.0; else scale = (double)NANOSEC / tdelta; /* only toplevel vdevs have capacity stats */ if (newvs->vs_space == 0) { (void) printf(" - -"); } else { print_one_stat(newvs->vs_alloc); print_one_stat(newvs->vs_space - newvs->vs_alloc); } print_one_stat((uint64_t)(scale * (newvs->vs_ops[ZIO_TYPE_READ] - oldvs->vs_ops[ZIO_TYPE_READ]))); print_one_stat((uint64_t)(scale * (newvs->vs_ops[ZIO_TYPE_WRITE] - oldvs->vs_ops[ZIO_TYPE_WRITE]))); print_one_stat((uint64_t)(scale * (newvs->vs_bytes[ZIO_TYPE_READ] - oldvs->vs_bytes[ZIO_TYPE_READ]))); print_one_stat((uint64_t)(scale * (newvs->vs_bytes[ZIO_TYPE_WRITE] - oldvs->vs_bytes[ZIO_TYPE_WRITE]))); (void) printf("\n"); if (!cb->cb_verbose) return; if (nvlist_lookup_nvlist_array(newnv, ZPOOL_CONFIG_CHILDREN, &newchild, &children) != 0) return; if (oldnv && nvlist_lookup_nvlist_array(oldnv, ZPOOL_CONFIG_CHILDREN, &oldchild, &c) != 0) return; for (c = 0; c < children; c++) { uint64_t ishole = B_FALSE, islog = B_FALSE; (void) nvlist_lookup_uint64(newchild[c], ZPOOL_CONFIG_IS_HOLE, &ishole); (void) nvlist_lookup_uint64(newchild[c], ZPOOL_CONFIG_IS_LOG, &islog); if (ishole || islog) continue; vname = zpool_vdev_name(g_zfs, zhp, newchild[c], B_FALSE); print_vdev_stats(zhp, vname, oldnv ? oldchild[c] : NULL, newchild[c], cb, depth + 2); free(vname); } /* * Log device section */ if (num_logs(newnv) > 0) { (void) printf("%-*s - - - - - " "-\n", cb->cb_namewidth, "logs"); for (c = 0; c < children; c++) { uint64_t islog = B_FALSE; (void) nvlist_lookup_uint64(newchild[c], ZPOOL_CONFIG_IS_LOG, &islog); if (islog) { vname = zpool_vdev_name(g_zfs, zhp, newchild[c], B_FALSE); print_vdev_stats(zhp, vname, oldnv ? oldchild[c] : NULL, newchild[c], cb, depth + 2); free(vname); } } } /* * Include level 2 ARC devices in iostat output */ if (nvlist_lookup_nvlist_array(newnv, ZPOOL_CONFIG_L2CACHE, &newchild, &children) != 0) return; if (oldnv && nvlist_lookup_nvlist_array(oldnv, ZPOOL_CONFIG_L2CACHE, &oldchild, &c) != 0) return; if (children > 0) { (void) printf("%-*s - - - - - " "-\n", cb->cb_namewidth, "cache"); for (c = 0; c < children; c++) { vname = zpool_vdev_name(g_zfs, zhp, newchild[c], B_FALSE); print_vdev_stats(zhp, vname, oldnv ? oldchild[c] : NULL, newchild[c], cb, depth + 2); free(vname); } } } static int refresh_iostat(zpool_handle_t *zhp, void *data) { iostat_cbdata_t *cb = data; boolean_t missing; /* * If the pool has disappeared, remove it from the list and continue. */ if (zpool_refresh_stats(zhp, &missing) != 0) return (-1); if (missing) pool_list_remove(cb->cb_list, zhp); return (0); } /* * Callback to print out the iostats for the given pool. */ int print_iostat(zpool_handle_t *zhp, void *data) { iostat_cbdata_t *cb = data; nvlist_t *oldconfig, *newconfig; nvlist_t *oldnvroot, *newnvroot; newconfig = zpool_get_config(zhp, &oldconfig); if (cb->cb_iteration == 1) oldconfig = NULL; verify(nvlist_lookup_nvlist(newconfig, ZPOOL_CONFIG_VDEV_TREE, &newnvroot) == 0); if (oldconfig == NULL) oldnvroot = NULL; else verify(nvlist_lookup_nvlist(oldconfig, ZPOOL_CONFIG_VDEV_TREE, &oldnvroot) == 0); /* * Print out the statistics for the pool. */ print_vdev_stats(zhp, zpool_get_name(zhp), oldnvroot, newnvroot, cb, 0); if (cb->cb_verbose) print_iostat_separator(cb); return (0); } int get_namewidth(zpool_handle_t *zhp, void *data) { iostat_cbdata_t *cb = data; nvlist_t *config, *nvroot; if ((config = zpool_get_config(zhp, NULL)) != NULL) { verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, &nvroot) == 0); if (!cb->cb_verbose) cb->cb_namewidth = strlen(zpool_get_name(zhp)); else cb->cb_namewidth = max_width(zhp, nvroot, 0, cb->cb_namewidth); } /* * The width must fall into the range [10,38]. The upper limit is the * maximum we can have and still fit in 80 columns. */ if (cb->cb_namewidth < 10) cb->cb_namewidth = 10; if (cb->cb_namewidth > 38) cb->cb_namewidth = 38; return (0); } /* * Parse the input string, get the 'interval' and 'count' value if there is one. */ static void get_interval_count(int *argcp, char **argv, unsigned long *iv, unsigned long *cnt) { unsigned long interval = 0, count = 0; int argc = *argcp, errno; /* * Determine if the last argument is an integer or a pool name */ if (argc > 0 && isdigit(argv[argc - 1][0])) { char *end; errno = 0; interval = strtoul(argv[argc - 1], &end, 10); if (*end == '\0' && errno == 0) { if (interval == 0) { (void) fprintf(stderr, gettext("interval " "cannot be zero\n")); usage(B_FALSE); } /* * Ignore the last parameter */ argc--; } else { /* * If this is not a valid number, just plow on. The * user will get a more informative error message later * on. */ interval = 0; } } /* * If the last argument is also an integer, then we have both a count * and an interval. */ if (argc > 0 && isdigit(argv[argc - 1][0])) { char *end; errno = 0; count = interval; interval = strtoul(argv[argc - 1], &end, 10); if (*end == '\0' && errno == 0) { if (interval == 0) { (void) fprintf(stderr, gettext("interval " "cannot be zero\n")); usage(B_FALSE); } /* * Ignore the last parameter */ argc--; } else { interval = 0; } } *iv = interval; *cnt = count; *argcp = argc; } static void get_timestamp_arg(char c) { if (c == 'u') timestamp_fmt = UDATE; else if (c == 'd') timestamp_fmt = DDATE; else usage(B_FALSE); } /* * zpool iostat [-v] [-T d|u] [pool] ... [interval [count]] * * -v Display statistics for individual vdevs * -T Display a timestamp in date(1) or Unix format * * This command can be tricky because we want to be able to deal with pool * creation/destruction as well as vdev configuration changes. The bulk of this * processing is handled by the pool_list_* routines in zpool_iter.c. We rely * on pool_list_update() to detect the addition of new pools. Configuration * changes are all handled within libzfs. */ int zpool_do_iostat(int argc, char **argv) { int c; int ret; int npools; unsigned long interval = 0, count = 0; zpool_list_t *list; boolean_t verbose = B_FALSE; iostat_cbdata_t cb; /* check options */ while ((c = getopt(argc, argv, "T:v")) != -1) { switch (c) { case 'T': get_timestamp_arg(*optarg); break; case 'v': verbose = B_TRUE; break; case '?': (void) fprintf(stderr, gettext("invalid option '%c'\n"), optopt); usage(B_FALSE); } } argc -= optind; argv += optind; get_interval_count(&argc, argv, &interval, &count); /* * Construct the list of all interesting pools. */ ret = 0; if ((list = pool_list_get(argc, argv, NULL, &ret)) == NULL) return (1); if (pool_list_count(list) == 0 && argc != 0) { pool_list_free(list); return (1); } if (pool_list_count(list) == 0 && interval == 0) { pool_list_free(list); (void) fprintf(stderr, gettext("no pools available\n")); return (1); } /* * Enter the main iostat loop. */ cb.cb_list = list; cb.cb_verbose = verbose; cb.cb_iteration = 0; cb.cb_namewidth = 0; for (;;) { pool_list_update(list); if ((npools = pool_list_count(list)) == 0) break; /* * Refresh all statistics. This is done as an explicit step * before calculating the maximum name width, so that any * configuration changes are properly accounted for. */ (void) pool_list_iter(list, B_FALSE, refresh_iostat, &cb); /* * Iterate over all pools to determine the maximum width * for the pool / device name column across all pools. */ cb.cb_namewidth = 0; (void) pool_list_iter(list, B_FALSE, get_namewidth, &cb); if (timestamp_fmt != NODATE) print_timestamp(timestamp_fmt); /* * If it's the first time, or verbose mode, print the header. */ if (++cb.cb_iteration == 1 || verbose) print_iostat_header(&cb); (void) pool_list_iter(list, B_FALSE, print_iostat, &cb); /* * If there's more than one pool, and we're not in verbose mode * (which prints a separator for us), then print a separator. */ if (npools > 1 && !verbose) print_iostat_separator(&cb); if (verbose) (void) printf("\n"); /* * Flush the output so that redirection to a file isn't buffered * indefinitely. */ (void) fflush(stdout); if (interval == 0) break; if (count != 0 && --count == 0) break; (void) sleep(interval); } pool_list_free(list); return (ret); } typedef struct list_cbdata { boolean_t cb_verbose; int cb_namewidth; boolean_t cb_scripted; zprop_list_t *cb_proplist; boolean_t cb_literal; } list_cbdata_t; /* * Given a list of columns to display, output appropriate headers for each one. */ static void print_header(list_cbdata_t *cb) { zprop_list_t *pl = cb->cb_proplist; char headerbuf[ZPOOL_MAXPROPLEN]; const char *header; boolean_t first = B_TRUE; boolean_t right_justify; size_t width = 0; for (; pl != NULL; pl = pl->pl_next) { width = pl->pl_width; if (first && cb->cb_verbose) { /* * Reset the width to accommodate the verbose listing * of devices. */ width = cb->cb_namewidth; } if (!first) (void) printf(" "); else first = B_FALSE; right_justify = B_FALSE; if (pl->pl_prop != ZPROP_INVAL) { header = zpool_prop_column_name(pl->pl_prop); right_justify = zpool_prop_align_right(pl->pl_prop); } else { int i; for (i = 0; pl->pl_user_prop[i] != '\0'; i++) headerbuf[i] = toupper(pl->pl_user_prop[i]); headerbuf[i] = '\0'; header = headerbuf; } if (pl->pl_next == NULL && !right_justify) (void) printf("%s", header); else if (right_justify) (void) printf("%*s", width, header); else (void) printf("%-*s", width, header); } (void) printf("\n"); } /* * Given a pool and a list of properties, print out all the properties according * to the described layout. */ static void print_pool(zpool_handle_t *zhp, list_cbdata_t *cb) { zprop_list_t *pl = cb->cb_proplist; boolean_t first = B_TRUE; char property[ZPOOL_MAXPROPLEN]; char *propstr; boolean_t right_justify; size_t width; for (; pl != NULL; pl = pl->pl_next) { width = pl->pl_width; if (first && cb->cb_verbose) { /* * Reset the width to accommodate the verbose listing * of devices. */ width = cb->cb_namewidth; } if (!first) { if (cb->cb_scripted) (void) printf("\t"); else (void) printf(" "); } else { first = B_FALSE; } right_justify = B_FALSE; if (pl->pl_prop != ZPROP_INVAL) { if (zpool_get_prop(zhp, pl->pl_prop, property, sizeof (property), NULL, cb->cb_literal) != 0) propstr = "-"; else propstr = property; right_justify = zpool_prop_align_right(pl->pl_prop); } else if ((zpool_prop_feature(pl->pl_user_prop) || zpool_prop_unsupported(pl->pl_user_prop)) && zpool_prop_get_feature(zhp, pl->pl_user_prop, property, sizeof (property)) == 0) { propstr = property; } else { propstr = "-"; } /* * If this is being called in scripted mode, or if this is the * last column and it is left-justified, don't include a width * format specifier. */ if (cb->cb_scripted || (pl->pl_next == NULL && !right_justify)) (void) printf("%s", propstr); else if (right_justify) (void) printf("%*s", width, propstr); else (void) printf("%-*s", width, propstr); } (void) printf("\n"); } static void print_one_column(zpool_prop_t prop, uint64_t value, boolean_t scripted, boolean_t valid) { char propval[64]; boolean_t fixed; size_t width = zprop_width(prop, &fixed, ZFS_TYPE_POOL); switch (prop) { case ZPOOL_PROP_EXPANDSZ: if (value == 0) (void) strlcpy(propval, "-", sizeof (propval)); else zfs_nicenum(value, propval, sizeof (propval)); break; case ZPOOL_PROP_FRAGMENTATION: if (value == ZFS_FRAG_INVALID) { (void) strlcpy(propval, "-", sizeof (propval)); } else { (void) snprintf(propval, sizeof (propval), "%llu%%", value); } break; case ZPOOL_PROP_CAPACITY: (void) snprintf(propval, sizeof (propval), "%llu%%", value); break; default: zfs_nicenum(value, propval, sizeof (propval)); } if (!valid) (void) strlcpy(propval, "-", sizeof (propval)); if (scripted) (void) printf("\t%s", propval); else (void) printf(" %*s", width, propval); } void print_list_stats(zpool_handle_t *zhp, const char *name, nvlist_t *nv, list_cbdata_t *cb, int depth) { nvlist_t **child; vdev_stat_t *vs; uint_t c, children; char *vname; boolean_t scripted = cb->cb_scripted; uint64_t islog = B_FALSE; boolean_t haslog = B_FALSE; char *dashes = "%-*s - - - - - -\n"; verify(nvlist_lookup_uint64_array(nv, ZPOOL_CONFIG_VDEV_STATS, (uint64_t **)&vs, &c) == 0); if (name != NULL) { boolean_t toplevel = (vs->vs_space != 0); uint64_t cap; if (scripted) (void) printf("\t%s", name); else if (strlen(name) + depth > cb->cb_namewidth) (void) printf("%*s%s", depth, "", name); else (void) printf("%*s%s%*s", depth, "", name, (int)(cb->cb_namewidth - strlen(name) - depth), ""); /* * Print the properties for the individual vdevs. Some * properties are only applicable to toplevel vdevs. The * 'toplevel' boolean value is passed to the print_one_column() * to indicate that the value is valid. */ print_one_column(ZPOOL_PROP_SIZE, vs->vs_space, scripted, toplevel); print_one_column(ZPOOL_PROP_ALLOCATED, vs->vs_alloc, scripted, toplevel); print_one_column(ZPOOL_PROP_FREE, vs->vs_space - vs->vs_alloc, scripted, toplevel); print_one_column(ZPOOL_PROP_EXPANDSZ, vs->vs_esize, scripted, B_TRUE); print_one_column(ZPOOL_PROP_FRAGMENTATION, vs->vs_fragmentation, scripted, (vs->vs_fragmentation != ZFS_FRAG_INVALID && toplevel)); cap = (vs->vs_space == 0) ? 0 : (vs->vs_alloc * 100 / vs->vs_space); print_one_column(ZPOOL_PROP_CAPACITY, cap, scripted, toplevel); (void) printf("\n"); } if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN, &child, &children) != 0) return; for (c = 0; c < children; c++) { uint64_t ishole = B_FALSE; if (nvlist_lookup_uint64(child[c], ZPOOL_CONFIG_IS_HOLE, &ishole) == 0 && ishole) continue; if (nvlist_lookup_uint64(child[c], ZPOOL_CONFIG_IS_LOG, &islog) == 0 && islog) { haslog = B_TRUE; continue; } vname = zpool_vdev_name(g_zfs, zhp, child[c], B_FALSE); print_list_stats(zhp, vname, child[c], cb, depth + 2); free(vname); } if (haslog == B_TRUE) { /* LINTED E_SEC_PRINTF_VAR_FMT */ (void) printf(dashes, cb->cb_namewidth, "log"); for (c = 0; c < children; c++) { if (nvlist_lookup_uint64(child[c], ZPOOL_CONFIG_IS_LOG, &islog) != 0 || !islog) continue; vname = zpool_vdev_name(g_zfs, zhp, child[c], B_FALSE); print_list_stats(zhp, vname, child[c], cb, depth + 2); free(vname); } } if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_L2CACHE, &child, &children) == 0 && children > 0) { /* LINTED E_SEC_PRINTF_VAR_FMT */ (void) printf(dashes, cb->cb_namewidth, "cache"); for (c = 0; c < children; c++) { vname = zpool_vdev_name(g_zfs, zhp, child[c], B_FALSE); print_list_stats(zhp, vname, child[c], cb, depth + 2); free(vname); } } if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_SPARES, &child, &children) == 0 && children > 0) { /* LINTED E_SEC_PRINTF_VAR_FMT */ (void) printf(dashes, cb->cb_namewidth, "spare"); for (c = 0; c < children; c++) { vname = zpool_vdev_name(g_zfs, zhp, child[c], B_FALSE); print_list_stats(zhp, vname, child[c], cb, depth + 2); free(vname); } } } /* * Generic callback function to list a pool. */ int list_callback(zpool_handle_t *zhp, void *data) { list_cbdata_t *cbp = data; nvlist_t *config; nvlist_t *nvroot; config = zpool_get_config(zhp, NULL); print_pool(zhp, cbp); if (!cbp->cb_verbose) return (0); verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, &nvroot) == 0); print_list_stats(zhp, NULL, nvroot, cbp, 0); return (0); } /* * zpool list [-Hp] [-o prop[,prop]*] [-T d|u] [pool] ... [interval [count]] * * -H Scripted mode. Don't display headers, and separate properties * by a single tab. * -o List of properties to display. Defaults to * "name,size,allocated,free,expandsize,fragmentation,capacity," * "dedupratio,health,altroot" * -p Diplay values in parsable (exact) format. * -T Display a timestamp in date(1) or Unix format * * List all pools in the system, whether or not they're healthy. Output space * statistics for each one, as well as health status summary. */ int zpool_do_list(int argc, char **argv) { int c; int ret; list_cbdata_t cb = { 0 }; static char default_props[] = "name,size,allocated,free,expandsize,fragmentation,capacity," "dedupratio,health,altroot"; char *props = default_props; unsigned long interval = 0, count = 0; zpool_list_t *list; boolean_t first = B_TRUE; /* check options */ while ((c = getopt(argc, argv, ":Ho:pT:v")) != -1) { switch (c) { case 'H': cb.cb_scripted = B_TRUE; break; case 'o': props = optarg; break; case 'p': cb.cb_literal = B_TRUE; break; case 'T': get_timestamp_arg(*optarg); break; case 'v': cb.cb_verbose = B_TRUE; break; case ':': (void) fprintf(stderr, gettext("missing argument for " "'%c' option\n"), optopt); usage(B_FALSE); break; case '?': (void) fprintf(stderr, gettext("invalid option '%c'\n"), optopt); usage(B_FALSE); } } argc -= optind; argv += optind; get_interval_count(&argc, argv, &interval, &count); if (zprop_get_list(g_zfs, props, &cb.cb_proplist, ZFS_TYPE_POOL) != 0) usage(B_FALSE); for (;;) { if ((list = pool_list_get(argc, argv, &cb.cb_proplist, &ret)) == NULL) return (1); if (pool_list_count(list) == 0) break; cb.cb_namewidth = 0; (void) pool_list_iter(list, B_FALSE, get_namewidth, &cb); if (timestamp_fmt != NODATE) print_timestamp(timestamp_fmt); if (!cb.cb_scripted && (first || cb.cb_verbose)) { print_header(&cb); first = B_FALSE; } ret = pool_list_iter(list, B_TRUE, list_callback, &cb); if (interval == 0) break; if (count != 0 && --count == 0) break; pool_list_free(list); (void) sleep(interval); } if (argc == 0 && !cb.cb_scripted && pool_list_count(list) == 0) { (void) printf(gettext("no pools available\n")); ret = 0; } pool_list_free(list); zprop_free_list(cb.cb_proplist); return (ret); } static int zpool_do_attach_or_replace(int argc, char **argv, int replacing) { boolean_t force = B_FALSE; int c; nvlist_t *nvroot; char *poolname, *old_disk, *new_disk; zpool_handle_t *zhp; int ret; /* check options */ while ((c = getopt(argc, argv, "f")) != -1) { switch (c) { case 'f': force = B_TRUE; break; case '?': (void) fprintf(stderr, gettext("invalid option '%c'\n"), optopt); usage(B_FALSE); } } argc -= optind; argv += optind; /* get pool name and check number of arguments */ if (argc < 1) { (void) fprintf(stderr, gettext("missing pool name argument\n")); usage(B_FALSE); } poolname = argv[0]; if (argc < 2) { (void) fprintf(stderr, gettext("missing specification\n")); usage(B_FALSE); } old_disk = argv[1]; if (argc < 3) { if (!replacing) { (void) fprintf(stderr, gettext("missing specification\n")); usage(B_FALSE); } new_disk = old_disk; argc -= 1; argv += 1; } else { new_disk = argv[2]; argc -= 2; argv += 2; } if (argc > 1) { (void) fprintf(stderr, gettext("too many arguments\n")); usage(B_FALSE); } if ((zhp = zpool_open(g_zfs, poolname)) == NULL) return (1); if (zpool_get_config(zhp, NULL) == NULL) { (void) fprintf(stderr, gettext("pool '%s' is unavailable\n"), poolname); zpool_close(zhp); return (1); } nvroot = make_root_vdev(zhp, force, B_FALSE, replacing, B_FALSE, argc, argv); if (nvroot == NULL) { zpool_close(zhp); return (1); } ret = zpool_vdev_attach(zhp, old_disk, new_disk, nvroot, replacing); nvlist_free(nvroot); zpool_close(zhp); return (ret); } /* * zpool replace [-f] * * -f Force attach, even if appears to be in use. * * Replace with . */ /* ARGSUSED */ int zpool_do_replace(int argc, char **argv) { return (zpool_do_attach_or_replace(argc, argv, B_TRUE)); } /* * zpool attach [-f] * * -f Force attach, even if appears to be in use. * * Attach to the mirror containing . If is not * part of a mirror, then will be transformed into a mirror of * and . In either case, will begin life * with a DTL of [0, now], and will immediately begin to resilver itself. */ int zpool_do_attach(int argc, char **argv) { return (zpool_do_attach_or_replace(argc, argv, B_FALSE)); } /* * zpool detach [-f] * * -f Force detach of , even if DTLs argue against it * (not supported yet) * * Detach a device from a mirror. The operation will be refused if * is the last device in the mirror, or if the DTLs indicate that this device * has the only valid copy of some data. */ /* ARGSUSED */ int zpool_do_detach(int argc, char **argv) { int c; char *poolname, *path; zpool_handle_t *zhp; int ret; /* check options */ while ((c = getopt(argc, argv, "f")) != -1) { switch (c) { case 'f': case '?': (void) fprintf(stderr, gettext("invalid option '%c'\n"), optopt); usage(B_FALSE); } } argc -= optind; argv += optind; /* get pool name and check number of arguments */ if (argc < 1) { (void) fprintf(stderr, gettext("missing pool name argument\n")); usage(B_FALSE); } if (argc < 2) { (void) fprintf(stderr, gettext("missing specification\n")); usage(B_FALSE); } poolname = argv[0]; path = argv[1]; if ((zhp = zpool_open(g_zfs, poolname)) == NULL) return (1); ret = zpool_vdev_detach(zhp, path); zpool_close(zhp); return (ret); } /* * zpool split [-n] [-o prop=val] ... * [-o mntopt] ... * [-R altroot] [ ...] * * -n Do not split the pool, but display the resulting layout if * it were to be split. * -o Set property=value, or set mount options. * -R Mount the split-off pool under an alternate root. * * Splits the named pool and gives it the new pool name. Devices to be split * off may be listed, provided that no more than one device is specified * per top-level vdev mirror. The newly split pool is left in an exported * state unless -R is specified. * * Restrictions: the top-level of the pool pool must only be made up of * mirrors; all devices in the pool must be healthy; no device may be * undergoing a resilvering operation. */ int zpool_do_split(int argc, char **argv) { char *srcpool, *newpool, *propval; char *mntopts = NULL; splitflags_t flags; int c, ret = 0; zpool_handle_t *zhp; nvlist_t *config, *props = NULL; flags.dryrun = B_FALSE; flags.import = B_FALSE; /* check options */ while ((c = getopt(argc, argv, ":R:no:")) != -1) { switch (c) { case 'R': flags.import = B_TRUE; if (add_prop_list( zpool_prop_to_name(ZPOOL_PROP_ALTROOT), optarg, &props, B_TRUE) != 0) { nvlist_free(props); usage(B_FALSE); } break; case 'n': flags.dryrun = B_TRUE; break; case 'o': if ((propval = strchr(optarg, '=')) != NULL) { *propval = '\0'; propval++; if (add_prop_list(optarg, propval, &props, B_TRUE) != 0) { nvlist_free(props); usage(B_FALSE); } } else { mntopts = optarg; } break; case ':': (void) fprintf(stderr, gettext("missing argument for " "'%c' option\n"), optopt); usage(B_FALSE); break; case '?': (void) fprintf(stderr, gettext("invalid option '%c'\n"), optopt); usage(B_FALSE); break; } } if (!flags.import && mntopts != NULL) { (void) fprintf(stderr, gettext("setting mntopts is only " "valid when importing the pool\n")); usage(B_FALSE); } argc -= optind; argv += optind; if (argc < 1) { (void) fprintf(stderr, gettext("Missing pool name\n")); usage(B_FALSE); } if (argc < 2) { (void) fprintf(stderr, gettext("Missing new pool name\n")); usage(B_FALSE); } srcpool = argv[0]; newpool = argv[1]; argc -= 2; argv += 2; if ((zhp = zpool_open(g_zfs, srcpool)) == NULL) return (1); config = split_mirror_vdev(zhp, newpool, props, flags, argc, argv); if (config == NULL) { ret = 1; } else { if (flags.dryrun) { (void) printf(gettext("would create '%s' with the " "following layout:\n\n"), newpool); print_vdev_tree(NULL, newpool, config, 0, B_FALSE); } nvlist_free(config); } zpool_close(zhp); if (ret != 0 || flags.dryrun || !flags.import) return (ret); /* * The split was successful. Now we need to open the new * pool and import it. */ if ((zhp = zpool_open_canfail(g_zfs, newpool)) == NULL) return (1); if (zpool_get_state(zhp) != POOL_STATE_UNAVAIL && zpool_enable_datasets(zhp, mntopts, 0) != 0) { ret = 1; (void) fprintf(stderr, gettext("Split was successful, but " "the datasets could not all be mounted\n")); (void) fprintf(stderr, gettext("Try doing '%s' with a " "different altroot\n"), "zpool import"); } zpool_close(zhp); return (ret); } /* * zpool online ... */ int zpool_do_online(int argc, char **argv) { int c, i; char *poolname; zpool_handle_t *zhp; int ret = 0; vdev_state_t newstate; int flags = 0; /* check options */ while ((c = getopt(argc, argv, "et")) != -1) { switch (c) { case 'e': flags |= ZFS_ONLINE_EXPAND; break; case 't': case '?': (void) fprintf(stderr, gettext("invalid option '%c'\n"), optopt); usage(B_FALSE); } } argc -= optind; argv += optind; /* get pool name and check number of arguments */ if (argc < 1) { (void) fprintf(stderr, gettext("missing pool name\n")); usage(B_FALSE); } if (argc < 2) { (void) fprintf(stderr, gettext("missing device name\n")); usage(B_FALSE); } poolname = argv[0]; if ((zhp = zpool_open(g_zfs, poolname)) == NULL) return (1); for (i = 1; i < argc; i++) { if (zpool_vdev_online(zhp, argv[i], flags, &newstate) == 0) { if (newstate != VDEV_STATE_HEALTHY) { (void) printf(gettext("warning: device '%s' " "onlined, but remains in faulted state\n"), argv[i]); if (newstate == VDEV_STATE_FAULTED) (void) printf(gettext("use 'zpool " "clear' to restore a faulted " "device\n")); else (void) printf(gettext("use 'zpool " "replace' to replace devices " "that are no longer present\n")); } } else { ret = 1; } } zpool_close(zhp); return (ret); } /* * zpool offline [-ft] ... * * -f Force the device into the offline state, even if doing * so would appear to compromise pool availability. * (not supported yet) * * -t Only take the device off-line temporarily. The offline * state will not be persistent across reboots. */ /* ARGSUSED */ int zpool_do_offline(int argc, char **argv) { int c, i; char *poolname; zpool_handle_t *zhp; int ret = 0; boolean_t istmp = B_FALSE; /* check options */ while ((c = getopt(argc, argv, "ft")) != -1) { switch (c) { case 't': istmp = B_TRUE; break; case 'f': case '?': (void) fprintf(stderr, gettext("invalid option '%c'\n"), optopt); usage(B_FALSE); } } argc -= optind; argv += optind; /* get pool name and check number of arguments */ if (argc < 1) { (void) fprintf(stderr, gettext("missing pool name\n")); usage(B_FALSE); } if (argc < 2) { (void) fprintf(stderr, gettext("missing device name\n")); usage(B_FALSE); } poolname = argv[0]; if ((zhp = zpool_open(g_zfs, poolname)) == NULL) return (1); for (i = 1; i < argc; i++) { if (zpool_vdev_offline(zhp, argv[i], istmp) != 0) ret = 1; } zpool_close(zhp); return (ret); } /* * zpool clear [device] * * Clear all errors associated with a pool or a particular device. */ int zpool_do_clear(int argc, char **argv) { int c; int ret = 0; boolean_t dryrun = B_FALSE; boolean_t do_rewind = B_FALSE; boolean_t xtreme_rewind = B_FALSE; uint32_t rewind_policy = ZPOOL_NO_REWIND; nvlist_t *policy = NULL; zpool_handle_t *zhp; char *pool, *device; /* check options */ while ((c = getopt(argc, argv, "FnX")) != -1) { switch (c) { case 'F': do_rewind = B_TRUE; break; case 'n': dryrun = B_TRUE; break; case 'X': xtreme_rewind = B_TRUE; break; case '?': (void) fprintf(stderr, gettext("invalid option '%c'\n"), optopt); usage(B_FALSE); } } argc -= optind; argv += optind; if (argc < 1) { (void) fprintf(stderr, gettext("missing pool name\n")); usage(B_FALSE); } if (argc > 2) { (void) fprintf(stderr, gettext("too many arguments\n")); usage(B_FALSE); } if ((dryrun || xtreme_rewind) && !do_rewind) { (void) fprintf(stderr, gettext("-n or -X only meaningful with -F\n")); usage(B_FALSE); } if (dryrun) rewind_policy = ZPOOL_TRY_REWIND; else if (do_rewind) rewind_policy = ZPOOL_DO_REWIND; if (xtreme_rewind) rewind_policy |= ZPOOL_EXTREME_REWIND; /* In future, further rewind policy choices can be passed along here */ if (nvlist_alloc(&policy, NV_UNIQUE_NAME, 0) != 0 || nvlist_add_uint32(policy, ZPOOL_REWIND_REQUEST, rewind_policy) != 0) return (1); pool = argv[0]; device = argc == 2 ? argv[1] : NULL; if ((zhp = zpool_open_canfail(g_zfs, pool)) == NULL) { nvlist_free(policy); return (1); } if (zpool_clear(zhp, device, policy) != 0) ret = 1; zpool_close(zhp); nvlist_free(policy); return (ret); } /* * zpool reguid */ int zpool_do_reguid(int argc, char **argv) { int c; char *poolname; zpool_handle_t *zhp; int ret = 0; /* check options */ while ((c = getopt(argc, argv, "")) != -1) { switch (c) { case '?': (void) fprintf(stderr, gettext("invalid option '%c'\n"), optopt); usage(B_FALSE); } } argc -= optind; argv += optind; /* get pool name and check number of arguments */ if (argc < 1) { (void) fprintf(stderr, gettext("missing pool name\n")); usage(B_FALSE); } if (argc > 1) { (void) fprintf(stderr, gettext("too many arguments\n")); usage(B_FALSE); } poolname = argv[0]; if ((zhp = zpool_open(g_zfs, poolname)) == NULL) return (1); ret = zpool_reguid(zhp); zpool_close(zhp); return (ret); } /* * zpool reopen * * Reopen the pool so that the kernel can update the sizes of all vdevs. */ int zpool_do_reopen(int argc, char **argv) { int c; int ret = 0; zpool_handle_t *zhp; char *pool; /* check options */ while ((c = getopt(argc, argv, "")) != -1) { switch (c) { case '?': (void) fprintf(stderr, gettext("invalid option '%c'\n"), optopt); usage(B_FALSE); } } argc--; argv++; if (argc < 1) { (void) fprintf(stderr, gettext("missing pool name\n")); usage(B_FALSE); } if (argc > 1) { (void) fprintf(stderr, gettext("too many arguments\n")); usage(B_FALSE); } pool = argv[0]; if ((zhp = zpool_open_canfail(g_zfs, pool)) == NULL) return (1); ret = zpool_reopen(zhp); zpool_close(zhp); return (ret); } typedef struct scrub_cbdata { int cb_type; int cb_argc; char **cb_argv; } scrub_cbdata_t; int scrub_callback(zpool_handle_t *zhp, void *data) { scrub_cbdata_t *cb = data; int err; /* * Ignore faulted pools. */ if (zpool_get_state(zhp) == POOL_STATE_UNAVAIL) { (void) fprintf(stderr, gettext("cannot scrub '%s': pool is " "currently unavailable\n"), zpool_get_name(zhp)); return (1); } err = zpool_scan(zhp, cb->cb_type); return (err != 0); } /* * zpool scrub [-s] ... * * -s Stop. Stops any in-progress scrub. */ int zpool_do_scrub(int argc, char **argv) { int c; scrub_cbdata_t cb; cb.cb_type = POOL_SCAN_SCRUB; /* check options */ while ((c = getopt(argc, argv, "s")) != -1) { switch (c) { case 's': cb.cb_type = POOL_SCAN_NONE; break; case '?': (void) fprintf(stderr, gettext("invalid option '%c'\n"), optopt); usage(B_FALSE); } } cb.cb_argc = argc; cb.cb_argv = argv; argc -= optind; argv += optind; if (argc < 1) { (void) fprintf(stderr, gettext("missing pool name argument\n")); usage(B_FALSE); } return (for_each_pool(argc, argv, B_TRUE, NULL, scrub_callback, &cb)); } typedef struct status_cbdata { int cb_count; boolean_t cb_allpools; boolean_t cb_verbose; boolean_t cb_explain; boolean_t cb_first; boolean_t cb_dedup_stats; } status_cbdata_t; /* * Print out detailed scrub status. */ void print_scan_status(pool_scan_stat_t *ps) { time_t start, end; uint64_t elapsed, mins_left, hours_left; uint64_t pass_exam, examined, total; uint_t rate; double fraction_done; char processed_buf[7], examined_buf[7], total_buf[7], rate_buf[7]; (void) printf(gettext(" scan: ")); /* If there's never been a scan, there's not much to say. */ if (ps == NULL || ps->pss_func == POOL_SCAN_NONE || ps->pss_func >= POOL_SCAN_FUNCS) { (void) printf(gettext("none requested\n")); return; } start = ps->pss_start_time; end = ps->pss_end_time; zfs_nicenum(ps->pss_processed, processed_buf, sizeof (processed_buf)); assert(ps->pss_func == POOL_SCAN_SCRUB || ps->pss_func == POOL_SCAN_RESILVER); /* * Scan is finished or canceled. */ if (ps->pss_state == DSS_FINISHED) { uint64_t minutes_taken = (end - start) / 60; char *fmt = NULL; if (ps->pss_func == POOL_SCAN_SCRUB) { fmt = gettext("scrub repaired %s in %lluh%um with " "%llu errors on %s"); } else if (ps->pss_func == POOL_SCAN_RESILVER) { fmt = gettext("resilvered %s in %lluh%um with " "%llu errors on %s"); } /* LINTED */ (void) printf(fmt, processed_buf, (u_longlong_t)(minutes_taken / 60), (uint_t)(minutes_taken % 60), (u_longlong_t)ps->pss_errors, ctime((time_t *)&end)); return; } else if (ps->pss_state == DSS_CANCELED) { if (ps->pss_func == POOL_SCAN_SCRUB) { (void) printf(gettext("scrub canceled on %s"), ctime(&end)); } else if (ps->pss_func == POOL_SCAN_RESILVER) { (void) printf(gettext("resilver canceled on %s"), ctime(&end)); } return; } assert(ps->pss_state == DSS_SCANNING); /* * Scan is in progress. */ if (ps->pss_func == POOL_SCAN_SCRUB) { (void) printf(gettext("scrub in progress since %s"), ctime(&start)); } else if (ps->pss_func == POOL_SCAN_RESILVER) { (void) printf(gettext("resilver in progress since %s"), ctime(&start)); } examined = ps->pss_examined ? ps->pss_examined : 1; total = ps->pss_to_examine; fraction_done = (double)examined / total; /* elapsed time for this pass */ elapsed = time(NULL) - ps->pss_pass_start; elapsed = elapsed ? elapsed : 1; pass_exam = ps->pss_pass_exam ? ps->pss_pass_exam : 1; rate = pass_exam / elapsed; rate = rate ? rate : 1; mins_left = ((total - examined) / rate) / 60; hours_left = mins_left / 60; zfs_nicenum(examined, examined_buf, sizeof (examined_buf)); zfs_nicenum(total, total_buf, sizeof (total_buf)); zfs_nicenum(rate, rate_buf, sizeof (rate_buf)); /* * do not print estimated time if hours_left is more than 30 days */ (void) printf(gettext(" %s scanned out of %s at %s/s"), examined_buf, total_buf, rate_buf); if (hours_left < (30 * 24)) { (void) printf(gettext(", %lluh%um to go\n"), (u_longlong_t)hours_left, (uint_t)(mins_left % 60)); } else { (void) printf(gettext( ", (scan is slow, no estimated time)\n")); } if (ps->pss_func == POOL_SCAN_RESILVER) { (void) printf(gettext(" %s resilvered, %.2f%% done\n"), processed_buf, 100 * fraction_done); } else if (ps->pss_func == POOL_SCAN_SCRUB) { (void) printf(gettext(" %s repaired, %.2f%% done\n"), processed_buf, 100 * fraction_done); } } static void print_error_log(zpool_handle_t *zhp) { nvlist_t *nverrlist = NULL; nvpair_t *elem; char *pathname; size_t len = MAXPATHLEN * 2; if (zpool_get_errlog(zhp, &nverrlist) != 0) { (void) printf("errors: List of errors unavailable " "(insufficient privileges)\n"); return; } (void) printf("errors: Permanent errors have been " "detected in the following files:\n\n"); pathname = safe_malloc(len); elem = NULL; while ((elem = nvlist_next_nvpair(nverrlist, elem)) != NULL) { nvlist_t *nv; uint64_t dsobj, obj; verify(nvpair_value_nvlist(elem, &nv) == 0); verify(nvlist_lookup_uint64(nv, ZPOOL_ERR_DATASET, &dsobj) == 0); verify(nvlist_lookup_uint64(nv, ZPOOL_ERR_OBJECT, &obj) == 0); zpool_obj_to_path(zhp, dsobj, obj, pathname, len); (void) printf("%7s %s\n", "", pathname); } free(pathname); nvlist_free(nverrlist); } static void print_spares(zpool_handle_t *zhp, nvlist_t **spares, uint_t nspares, int namewidth) { uint_t i; char *name; if (nspares == 0) return; (void) printf(gettext("\tspares\n")); for (i = 0; i < nspares; i++) { name = zpool_vdev_name(g_zfs, zhp, spares[i], B_FALSE); print_status_config(zhp, name, spares[i], namewidth, 2, B_TRUE); free(name); } } static void print_l2cache(zpool_handle_t *zhp, nvlist_t **l2cache, uint_t nl2cache, int namewidth) { uint_t i; char *name; if (nl2cache == 0) return; (void) printf(gettext("\tcache\n")); for (i = 0; i < nl2cache; i++) { name = zpool_vdev_name(g_zfs, zhp, l2cache[i], B_FALSE); print_status_config(zhp, name, l2cache[i], namewidth, 2, B_FALSE); free(name); } } static void print_dedup_stats(nvlist_t *config) { ddt_histogram_t *ddh; ddt_stat_t *dds; ddt_object_t *ddo; uint_t c; /* * If the pool was faulted then we may not have been able to * obtain the config. Otherwise, if we have anything in the dedup * table continue processing the stats. */ if (nvlist_lookup_uint64_array(config, ZPOOL_CONFIG_DDT_OBJ_STATS, (uint64_t **)&ddo, &c) != 0) return; (void) printf("\n"); (void) printf(gettext(" dedup: ")); if (ddo->ddo_count == 0) { (void) printf(gettext("no DDT entries\n")); return; } (void) printf("DDT entries %llu, size %llu on disk, %llu in core\n", (u_longlong_t)ddo->ddo_count, (u_longlong_t)ddo->ddo_dspace, (u_longlong_t)ddo->ddo_mspace); verify(nvlist_lookup_uint64_array(config, ZPOOL_CONFIG_DDT_STATS, (uint64_t **)&dds, &c) == 0); verify(nvlist_lookup_uint64_array(config, ZPOOL_CONFIG_DDT_HISTOGRAM, (uint64_t **)&ddh, &c) == 0); zpool_dump_ddt(dds, ddh); } /* * Display a summary of pool status. Displays a summary such as: * * pool: tank * status: DEGRADED * reason: One or more devices ... * see: http://illumos.org/msg/ZFS-xxxx-01 * config: * mirror DEGRADED * c1t0d0 OK * c2t0d0 UNAVAIL * * When given the '-v' option, we print out the complete config. If the '-e' * option is specified, then we print out error rate information as well. */ int status_callback(zpool_handle_t *zhp, void *data) { status_cbdata_t *cbp = data; nvlist_t *config, *nvroot; char *msgid; int reason; const char *health; uint_t c; vdev_stat_t *vs; config = zpool_get_config(zhp, NULL); reason = zpool_get_status(zhp, &msgid); cbp->cb_count++; /* * If we were given 'zpool status -x', only report those pools with * problems. */ if (cbp->cb_explain && (reason == ZPOOL_STATUS_OK || reason == ZPOOL_STATUS_VERSION_OLDER || reason == ZPOOL_STATUS_FEAT_DISABLED)) { if (!cbp->cb_allpools) { (void) printf(gettext("pool '%s' is healthy\n"), zpool_get_name(zhp)); if (cbp->cb_first) cbp->cb_first = B_FALSE; } return (0); } if (cbp->cb_first) cbp->cb_first = B_FALSE; else (void) printf("\n"); verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, &nvroot) == 0); verify(nvlist_lookup_uint64_array(nvroot, ZPOOL_CONFIG_VDEV_STATS, (uint64_t **)&vs, &c) == 0); health = zpool_state_to_name(vs->vs_state, vs->vs_aux); (void) printf(gettext(" pool: %s\n"), zpool_get_name(zhp)); (void) printf(gettext(" state: %s\n"), health); switch (reason) { case ZPOOL_STATUS_MISSING_DEV_R: (void) printf(gettext("status: One or more devices could not " "be opened. Sufficient replicas exist for\n\tthe pool to " "continue functioning in a degraded state.\n")); (void) printf(gettext("action: Attach the missing device and " "online it using 'zpool online'.\n")); break; case ZPOOL_STATUS_MISSING_DEV_NR: (void) printf(gettext("status: One or more devices could not " "be opened. There are insufficient\n\treplicas for the " "pool to continue functioning.\n")); (void) printf(gettext("action: Attach the missing device and " "online it using 'zpool online'.\n")); break; case ZPOOL_STATUS_CORRUPT_LABEL_R: (void) printf(gettext("status: One or more devices could not " "be used because the label is missing or\n\tinvalid. " "Sufficient replicas exist for the pool to continue\n\t" "functioning in a degraded state.\n")); (void) printf(gettext("action: Replace the device using " "'zpool replace'.\n")); break; case ZPOOL_STATUS_CORRUPT_LABEL_NR: (void) printf(gettext("status: One or more devices could not " "be used because the label is missing \n\tor invalid. " "There are insufficient replicas for the pool to " "continue\n\tfunctioning.\n")); zpool_explain_recover(zpool_get_handle(zhp), zpool_get_name(zhp), reason, config); break; case ZPOOL_STATUS_FAILING_DEV: (void) printf(gettext("status: One or more devices has " "experienced an unrecoverable error. An\n\tattempt was " "made to correct the error. Applications are " "unaffected.\n")); (void) printf(gettext("action: Determine if the device needs " "to be replaced, and clear the errors\n\tusing " "'zpool clear' or replace the device with 'zpool " "replace'.\n")); break; case ZPOOL_STATUS_OFFLINE_DEV: (void) printf(gettext("status: One or more devices has " "been taken offline by the administrator.\n\tSufficient " "replicas exist for the pool to continue functioning in " "a\n\tdegraded state.\n")); (void) printf(gettext("action: Online the device using " "'zpool online' or replace the device with\n\t'zpool " "replace'.\n")); break; case ZPOOL_STATUS_REMOVED_DEV: (void) printf(gettext("status: One or more devices has " "been removed by the administrator.\n\tSufficient " "replicas exist for the pool to continue functioning in " "a\n\tdegraded state.\n")); (void) printf(gettext("action: Online the device using " "'zpool online' or replace the device with\n\t'zpool " "replace'.\n")); break; case ZPOOL_STATUS_RESILVERING: (void) printf(gettext("status: One or more devices is " "currently being resilvered. The pool will\n\tcontinue " "to function, possibly in a degraded state.\n")); (void) printf(gettext("action: Wait for the resilver to " "complete.\n")); break; case ZPOOL_STATUS_CORRUPT_DATA: (void) printf(gettext("status: One or more devices has " "experienced an error resulting in data\n\tcorruption. " "Applications may be affected.\n")); (void) printf(gettext("action: Restore the file in question " "if possible. Otherwise restore the\n\tentire pool from " "backup.\n")); break; case ZPOOL_STATUS_CORRUPT_POOL: (void) printf(gettext("status: The pool metadata is corrupted " "and the pool cannot be opened.\n")); zpool_explain_recover(zpool_get_handle(zhp), zpool_get_name(zhp), reason, config); break; case ZPOOL_STATUS_VERSION_OLDER: (void) printf(gettext("status: The pool is formatted using a " "legacy on-disk format. The pool can\n\tstill be used, " "but some features are unavailable.\n")); (void) printf(gettext("action: Upgrade the pool using 'zpool " "upgrade'. Once this is done, the\n\tpool will no longer " "be accessible on software that does not support feature\n" "\tflags.\n")); break; case ZPOOL_STATUS_VERSION_NEWER: (void) printf(gettext("status: The pool has been upgraded to a " "newer, incompatible on-disk version.\n\tThe pool cannot " "be accessed on this system.\n")); (void) printf(gettext("action: Access the pool from a system " "running more recent software, or\n\trestore the pool from " "backup.\n")); break; case ZPOOL_STATUS_FEAT_DISABLED: (void) printf(gettext("status: Some supported features are not " "enabled on the pool. The pool can\n\tstill be used, but " "some features are unavailable.\n")); (void) printf(gettext("action: Enable all features using " "'zpool upgrade'. Once this is done,\n\tthe pool may no " "longer be accessible by software that does not support\n\t" "the features. See zpool-features(5) for details.\n")); break; case ZPOOL_STATUS_UNSUP_FEAT_READ: (void) printf(gettext("status: The pool cannot be accessed on " "this system because it uses the\n\tfollowing feature(s) " "not supported on this system:\n")); zpool_print_unsup_feat(config); (void) printf("\n"); (void) printf(gettext("action: Access the pool from a system " "that supports the required feature(s),\n\tor restore the " "pool from backup.\n")); break; case ZPOOL_STATUS_UNSUP_FEAT_WRITE: (void) printf(gettext("status: The pool can only be accessed " "in read-only mode on this system. It\n\tcannot be " "accessed in read-write mode because it uses the " "following\n\tfeature(s) not supported on this system:\n")); zpool_print_unsup_feat(config); (void) printf("\n"); (void) printf(gettext("action: The pool cannot be accessed in " "read-write mode. Import the pool with\n" "\t\"-o readonly=on\", access the pool from a system that " "supports the\n\trequired feature(s), or restore the " "pool from backup.\n")); break; case ZPOOL_STATUS_FAULTED_DEV_R: (void) printf(gettext("status: One or more devices are " "faulted in response to persistent errors.\n\tSufficient " "replicas exist for the pool to continue functioning " "in a\n\tdegraded state.\n")); (void) printf(gettext("action: Replace the faulted device, " "or use 'zpool clear' to mark the device\n\trepaired.\n")); break; case ZPOOL_STATUS_FAULTED_DEV_NR: (void) printf(gettext("status: One or more devices are " "faulted in response to persistent errors. There are " "insufficient replicas for the pool to\n\tcontinue " "functioning.\n")); (void) printf(gettext("action: Destroy and re-create the pool " "from a backup source. Manually marking the device\n" "\trepaired using 'zpool clear' may allow some data " "to be recovered.\n")); break; case ZPOOL_STATUS_IO_FAILURE_WAIT: case ZPOOL_STATUS_IO_FAILURE_CONTINUE: (void) printf(gettext("status: One or more devices are " "faulted in response to IO failures.\n")); (void) printf(gettext("action: Make sure the affected devices " "are connected, then run 'zpool clear'.\n")); break; case ZPOOL_STATUS_BAD_LOG: (void) printf(gettext("status: An intent log record " "could not be read.\n" "\tWaiting for adminstrator intervention to fix the " "faulted pool.\n")); (void) printf(gettext("action: Either restore the affected " "device(s) and run 'zpool online',\n" "\tor ignore the intent log records by running " "'zpool clear'.\n")); break; default: /* * The remaining errors can't actually be generated, yet. */ assert(reason == ZPOOL_STATUS_OK); } if (msgid != NULL) (void) printf(gettext(" see: http://illumos.org/msg/%s\n"), msgid); if (config != NULL) { int namewidth; uint64_t nerr; nvlist_t **spares, **l2cache; uint_t nspares, nl2cache; pool_scan_stat_t *ps = NULL; (void) nvlist_lookup_uint64_array(nvroot, ZPOOL_CONFIG_SCAN_STATS, (uint64_t **)&ps, &c); print_scan_status(ps); namewidth = max_width(zhp, nvroot, 0, 0); if (namewidth < 10) namewidth = 10; (void) printf(gettext("config:\n\n")); (void) printf(gettext("\t%-*s %-8s %5s %5s %5s\n"), namewidth, "NAME", "STATE", "READ", "WRITE", "CKSUM"); print_status_config(zhp, zpool_get_name(zhp), nvroot, namewidth, 0, B_FALSE); if (num_logs(nvroot) > 0) print_logs(zhp, nvroot, namewidth, B_TRUE); if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_L2CACHE, &l2cache, &nl2cache) == 0) print_l2cache(zhp, l2cache, nl2cache, namewidth); if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_SPARES, &spares, &nspares) == 0) print_spares(zhp, spares, nspares, namewidth); if (nvlist_lookup_uint64(config, ZPOOL_CONFIG_ERRCOUNT, &nerr) == 0) { nvlist_t *nverrlist = NULL; /* * If the approximate error count is small, get a * precise count by fetching the entire log and * uniquifying the results. */ if (nerr > 0 && nerr < 100 && !cbp->cb_verbose && zpool_get_errlog(zhp, &nverrlist) == 0) { nvpair_t *elem; elem = NULL; nerr = 0; while ((elem = nvlist_next_nvpair(nverrlist, elem)) != NULL) { nerr++; } } nvlist_free(nverrlist); (void) printf("\n"); if (nerr == 0) (void) printf(gettext("errors: No known data " "errors\n")); else if (!cbp->cb_verbose) (void) printf(gettext("errors: %llu data " "errors, use '-v' for a list\n"), (u_longlong_t)nerr); else print_error_log(zhp); } if (cbp->cb_dedup_stats) print_dedup_stats(config); } else { (void) printf(gettext("config: The configuration cannot be " "determined.\n")); } return (0); } /* * zpool status [-vx] [-T d|u] [pool] ... [interval [count]] * * -v Display complete error logs * -x Display only pools with potential problems * -D Display dedup status (undocumented) * -T Display a timestamp in date(1) or Unix format * * Describes the health status of all pools or some subset. */ int zpool_do_status(int argc, char **argv) { int c; int ret; unsigned long interval = 0, count = 0; status_cbdata_t cb = { 0 }; /* check options */ while ((c = getopt(argc, argv, "vxDT:")) != -1) { switch (c) { case 'v': cb.cb_verbose = B_TRUE; break; case 'x': cb.cb_explain = B_TRUE; break; case 'D': cb.cb_dedup_stats = B_TRUE; break; case 'T': get_timestamp_arg(*optarg); break; case '?': (void) fprintf(stderr, gettext("invalid option '%c'\n"), optopt); usage(B_FALSE); } } argc -= optind; argv += optind; get_interval_count(&argc, argv, &interval, &count); if (argc == 0) cb.cb_allpools = B_TRUE; cb.cb_first = B_TRUE; for (;;) { if (timestamp_fmt != NODATE) print_timestamp(timestamp_fmt); ret = for_each_pool(argc, argv, B_TRUE, NULL, status_callback, &cb); if (argc == 0 && cb.cb_count == 0) (void) printf(gettext("no pools available\n")); else if (cb.cb_explain && cb.cb_first && cb.cb_allpools) (void) printf(gettext("all pools are healthy\n")); if (ret != 0) return (ret); if (interval == 0) break; if (count != 0 && --count == 0) break; (void) sleep(interval); } return (0); } typedef struct upgrade_cbdata { int cb_first; int cb_argc; uint64_t cb_version; char **cb_argv; } upgrade_cbdata_t; static int upgrade_version(zpool_handle_t *zhp, uint64_t version) { int ret; nvlist_t *config; uint64_t oldversion; config = zpool_get_config(zhp, NULL); verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_VERSION, &oldversion) == 0); assert(SPA_VERSION_IS_SUPPORTED(oldversion)); assert(oldversion < version); ret = zpool_upgrade(zhp, version); if (ret != 0) return (ret); if (version >= SPA_VERSION_FEATURES) { (void) printf(gettext("Successfully upgraded " "'%s' from version %llu to feature flags.\n"), zpool_get_name(zhp), oldversion); } else { (void) printf(gettext("Successfully upgraded " "'%s' from version %llu to version %llu.\n"), zpool_get_name(zhp), oldversion, version); } return (0); } static int upgrade_enable_all(zpool_handle_t *zhp, int *countp) { int i, ret, count; boolean_t firstff = B_TRUE; nvlist_t *enabled = zpool_get_features(zhp); count = 0; for (i = 0; i < SPA_FEATURES; i++) { const char *fname = spa_feature_table[i].fi_uname; const char *fguid = spa_feature_table[i].fi_guid; if (!nvlist_exists(enabled, fguid)) { char *propname; verify(-1 != asprintf(&propname, "feature@%s", fname)); ret = zpool_set_prop(zhp, propname, ZFS_FEATURE_ENABLED); if (ret != 0) { free(propname); return (ret); } count++; if (firstff) { (void) printf(gettext("Enabled the " "following features on '%s':\n"), zpool_get_name(zhp)); firstff = B_FALSE; } (void) printf(gettext(" %s\n"), fname); free(propname); } } if (countp != NULL) *countp = count; return (0); } static int upgrade_cb(zpool_handle_t *zhp, void *arg) { upgrade_cbdata_t *cbp = arg; nvlist_t *config; uint64_t version; boolean_t printnl = B_FALSE; int ret; config = zpool_get_config(zhp, NULL); verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_VERSION, &version) == 0); assert(SPA_VERSION_IS_SUPPORTED(version)); if (version < cbp->cb_version) { cbp->cb_first = B_FALSE; ret = upgrade_version(zhp, cbp->cb_version); if (ret != 0) return (ret); printnl = B_TRUE; /* * If they did "zpool upgrade -a", then we could * be doing ioctls to different pools. We need * to log this history once to each pool, and bypass * the normal history logging that happens in main(). */ (void) zpool_log_history(g_zfs, history_str); log_history = B_FALSE; } if (cbp->cb_version >= SPA_VERSION_FEATURES) { int count; ret = upgrade_enable_all(zhp, &count); if (ret != 0) return (ret); if (count > 0) { cbp->cb_first = B_FALSE; printnl = B_TRUE; } } if (printnl) { (void) printf(gettext("\n")); } return (0); } static int upgrade_list_older_cb(zpool_handle_t *zhp, void *arg) { upgrade_cbdata_t *cbp = arg; nvlist_t *config; uint64_t version; config = zpool_get_config(zhp, NULL); verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_VERSION, &version) == 0); assert(SPA_VERSION_IS_SUPPORTED(version)); if (version < SPA_VERSION_FEATURES) { if (cbp->cb_first) { (void) printf(gettext("The following pools are " "formatted with legacy version numbers and can\n" "be upgraded to use feature flags. After " "being upgraded, these pools\nwill no " "longer be accessible by software that does not " "support feature\nflags.\n\n")); (void) printf(gettext("VER POOL\n")); (void) printf(gettext("--- ------------\n")); cbp->cb_first = B_FALSE; } (void) printf("%2llu %s\n", (u_longlong_t)version, zpool_get_name(zhp)); } return (0); } static int upgrade_list_disabled_cb(zpool_handle_t *zhp, void *arg) { upgrade_cbdata_t *cbp = arg; nvlist_t *config; uint64_t version; config = zpool_get_config(zhp, NULL); verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_VERSION, &version) == 0); if (version >= SPA_VERSION_FEATURES) { int i; boolean_t poolfirst = B_TRUE; nvlist_t *enabled = zpool_get_features(zhp); for (i = 0; i < SPA_FEATURES; i++) { const char *fguid = spa_feature_table[i].fi_guid; const char *fname = spa_feature_table[i].fi_uname; if (!nvlist_exists(enabled, fguid)) { if (cbp->cb_first) { (void) printf(gettext("\nSome " "supported features are not " "enabled on the following pools. " "Once a\nfeature is enabled the " "pool may become incompatible with " "software\nthat does not support " "the feature. See " "zpool-features(5) for " "details.\n\n")); (void) printf(gettext("POOL " "FEATURE\n")); (void) printf(gettext("------" "---------\n")); cbp->cb_first = B_FALSE; } if (poolfirst) { (void) printf(gettext("%s\n"), zpool_get_name(zhp)); poolfirst = B_FALSE; } (void) printf(gettext(" %s\n"), fname); } } } return (0); } /* ARGSUSED */ static int upgrade_one(zpool_handle_t *zhp, void *data) { boolean_t printnl = B_FALSE; upgrade_cbdata_t *cbp = data; uint64_t cur_version; int ret; if (strcmp("log", zpool_get_name(zhp)) == 0) { (void) printf(gettext("'log' is now a reserved word\n" "Pool 'log' must be renamed using export and import" " to upgrade.\n")); return (1); } cur_version = zpool_get_prop_int(zhp, ZPOOL_PROP_VERSION, NULL); if (cur_version > cbp->cb_version) { (void) printf(gettext("Pool '%s' is already formatted " "using more current version '%llu'.\n\n"), zpool_get_name(zhp), cur_version); return (0); } if (cbp->cb_version != SPA_VERSION && cur_version == cbp->cb_version) { (void) printf(gettext("Pool '%s' is already formatted " "using version %llu.\n\n"), zpool_get_name(zhp), cbp->cb_version); return (0); } if (cur_version != cbp->cb_version) { printnl = B_TRUE; ret = upgrade_version(zhp, cbp->cb_version); if (ret != 0) return (ret); } if (cbp->cb_version >= SPA_VERSION_FEATURES) { int count = 0; ret = upgrade_enable_all(zhp, &count); if (ret != 0) return (ret); if (count != 0) { printnl = B_TRUE; } else if (cur_version == SPA_VERSION) { (void) printf(gettext("Pool '%s' already has all " "supported features enabled.\n"), zpool_get_name(zhp)); } } if (printnl) { (void) printf(gettext("\n")); } return (0); } /* * zpool upgrade * zpool upgrade -v * zpool upgrade [-V version] <-a | pool ...> * * With no arguments, display downrev'd ZFS pool available for upgrade. * Individual pools can be upgraded by specifying the pool, and '-a' will * upgrade all pools. */ int zpool_do_upgrade(int argc, char **argv) { int c; upgrade_cbdata_t cb = { 0 }; int ret = 0; boolean_t showversions = B_FALSE; boolean_t upgradeall = B_FALSE; char *end; /* check options */ while ((c = getopt(argc, argv, ":avV:")) != -1) { switch (c) { case 'a': upgradeall = B_TRUE; break; case 'v': showversions = B_TRUE; break; case 'V': cb.cb_version = strtoll(optarg, &end, 10); if (*end != '\0' || !SPA_VERSION_IS_SUPPORTED(cb.cb_version)) { (void) fprintf(stderr, gettext("invalid version '%s'\n"), optarg); usage(B_FALSE); } break; case ':': (void) fprintf(stderr, gettext("missing argument for " "'%c' option\n"), optopt); usage(B_FALSE); break; case '?': (void) fprintf(stderr, gettext("invalid option '%c'\n"), optopt); usage(B_FALSE); } } cb.cb_argc = argc; cb.cb_argv = argv; argc -= optind; argv += optind; if (cb.cb_version == 0) { cb.cb_version = SPA_VERSION; } else if (!upgradeall && argc == 0) { (void) fprintf(stderr, gettext("-V option is " "incompatible with other arguments\n")); usage(B_FALSE); } if (showversions) { if (upgradeall || argc != 0) { (void) fprintf(stderr, gettext("-v option is " "incompatible with other arguments\n")); usage(B_FALSE); } } else if (upgradeall) { if (argc != 0) { (void) fprintf(stderr, gettext("-a option should not " "be used along with a pool name\n")); usage(B_FALSE); } } (void) printf(gettext("This system supports ZFS pool feature " "flags.\n\n")); if (showversions) { int i; (void) printf(gettext("The following features are " "supported:\n\n")); (void) printf(gettext("FEAT DESCRIPTION\n")); (void) printf("----------------------------------------------" "---------------\n"); for (i = 0; i < SPA_FEATURES; i++) { zfeature_info_t *fi = &spa_feature_table[i]; const char *ro = (fi->fi_flags & ZFEATURE_FLAG_READONLY_COMPAT) ? " (read-only compatible)" : ""; (void) printf("%-37s%s\n", fi->fi_uname, ro); (void) printf(" %s\n", fi->fi_desc); } (void) printf("\n"); (void) printf(gettext("The following legacy versions are also " "supported:\n\n")); (void) printf(gettext("VER DESCRIPTION\n")); (void) printf("--- -----------------------------------------" "---------------\n"); (void) printf(gettext(" 1 Initial ZFS version\n")); (void) printf(gettext(" 2 Ditto blocks " "(replicated metadata)\n")); (void) printf(gettext(" 3 Hot spares and double parity " "RAID-Z\n")); (void) printf(gettext(" 4 zpool history\n")); (void) printf(gettext(" 5 Compression using the gzip " "algorithm\n")); (void) printf(gettext(" 6 bootfs pool property\n")); (void) printf(gettext(" 7 Separate intent log devices\n")); (void) printf(gettext(" 8 Delegated administration\n")); (void) printf(gettext(" 9 refquota and refreservation " "properties\n")); (void) printf(gettext(" 10 Cache devices\n")); (void) printf(gettext(" 11 Improved scrub performance\n")); (void) printf(gettext(" 12 Snapshot properties\n")); (void) printf(gettext(" 13 snapused property\n")); (void) printf(gettext(" 14 passthrough-x aclinherit\n")); (void) printf(gettext(" 15 user/group space accounting\n")); (void) printf(gettext(" 16 stmf property support\n")); (void) printf(gettext(" 17 Triple-parity RAID-Z\n")); (void) printf(gettext(" 18 Snapshot user holds\n")); (void) printf(gettext(" 19 Log device removal\n")); (void) printf(gettext(" 20 Compression using zle " "(zero-length encoding)\n")); (void) printf(gettext(" 21 Deduplication\n")); (void) printf(gettext(" 22 Received properties\n")); (void) printf(gettext(" 23 Slim ZIL\n")); (void) printf(gettext(" 24 System attributes\n")); (void) printf(gettext(" 25 Improved scrub stats\n")); (void) printf(gettext(" 26 Improved snapshot deletion " "performance\n")); (void) printf(gettext(" 27 Improved snapshot creation " "performance\n")); (void) printf(gettext(" 28 Multiple vdev replacements\n")); (void) printf(gettext("\nFor more information on a particular " "version, including supported releases,\n")); (void) printf(gettext("see the ZFS Administration Guide.\n\n")); } else if (argc == 0 && upgradeall) { cb.cb_first = B_TRUE; ret = zpool_iter(g_zfs, upgrade_cb, &cb); if (ret == 0 && cb.cb_first) { if (cb.cb_version == SPA_VERSION) { (void) printf(gettext("All pools are already " "formatted using feature flags.\n\n")); (void) printf(gettext("Every feature flags " "pool already has all supported features " "enabled.\n")); } else { (void) printf(gettext("All pools are already " "formatted with version %llu or higher.\n"), cb.cb_version); } } } else if (argc == 0) { cb.cb_first = B_TRUE; ret = zpool_iter(g_zfs, upgrade_list_older_cb, &cb); assert(ret == 0); if (cb.cb_first) { (void) printf(gettext("All pools are formatted " "using feature flags.\n\n")); } else { (void) printf(gettext("\nUse 'zpool upgrade -v' " "for a list of available legacy versions.\n")); } cb.cb_first = B_TRUE; ret = zpool_iter(g_zfs, upgrade_list_disabled_cb, &cb); assert(ret == 0); if (cb.cb_first) { (void) printf(gettext("Every feature flags pool has " "all supported features enabled.\n")); } else { (void) printf(gettext("\n")); } } else { ret = for_each_pool(argc, argv, B_FALSE, NULL, upgrade_one, &cb); } return (ret); } typedef struct hist_cbdata { boolean_t first; boolean_t longfmt; boolean_t internal; } hist_cbdata_t; /* * Print out the command history for a specific pool. */ static int get_history_one(zpool_handle_t *zhp, void *data) { nvlist_t *nvhis; nvlist_t **records; uint_t numrecords; int ret, i; hist_cbdata_t *cb = (hist_cbdata_t *)data; cb->first = B_FALSE; (void) printf(gettext("History for '%s':\n"), zpool_get_name(zhp)); if ((ret = zpool_get_history(zhp, &nvhis)) != 0) return (ret); verify(nvlist_lookup_nvlist_array(nvhis, ZPOOL_HIST_RECORD, &records, &numrecords) == 0); for (i = 0; i < numrecords; i++) { nvlist_t *rec = records[i]; char tbuf[30] = ""; if (nvlist_exists(rec, ZPOOL_HIST_TIME)) { time_t tsec; struct tm t; tsec = fnvlist_lookup_uint64(records[i], ZPOOL_HIST_TIME); (void) localtime_r(&tsec, &t); (void) strftime(tbuf, sizeof (tbuf), "%F.%T", &t); } if (nvlist_exists(rec, ZPOOL_HIST_CMD)) { (void) printf("%s %s", tbuf, fnvlist_lookup_string(rec, ZPOOL_HIST_CMD)); } else if (nvlist_exists(rec, ZPOOL_HIST_INT_EVENT)) { int ievent = fnvlist_lookup_uint64(rec, ZPOOL_HIST_INT_EVENT); if (!cb->internal) continue; if (ievent >= ZFS_NUM_LEGACY_HISTORY_EVENTS) { (void) printf("%s unrecognized record:\n", tbuf); dump_nvlist(rec, 4); continue; } (void) printf("%s [internal %s txg:%lld] %s", tbuf, zfs_history_event_names[ievent], fnvlist_lookup_uint64(rec, ZPOOL_HIST_TXG), fnvlist_lookup_string(rec, ZPOOL_HIST_INT_STR)); } else if (nvlist_exists(rec, ZPOOL_HIST_INT_NAME)) { if (!cb->internal) continue; (void) printf("%s [txg:%lld] %s", tbuf, fnvlist_lookup_uint64(rec, ZPOOL_HIST_TXG), fnvlist_lookup_string(rec, ZPOOL_HIST_INT_NAME)); if (nvlist_exists(rec, ZPOOL_HIST_DSNAME)) { (void) printf(" %s (%llu)", fnvlist_lookup_string(rec, ZPOOL_HIST_DSNAME), fnvlist_lookup_uint64(rec, ZPOOL_HIST_DSID)); } (void) printf(" %s", fnvlist_lookup_string(rec, ZPOOL_HIST_INT_STR)); } else if (nvlist_exists(rec, ZPOOL_HIST_IOCTL)) { if (!cb->internal) continue; (void) printf("%s ioctl %s\n", tbuf, fnvlist_lookup_string(rec, ZPOOL_HIST_IOCTL)); if (nvlist_exists(rec, ZPOOL_HIST_INPUT_NVL)) { (void) printf(" input:\n"); dump_nvlist(fnvlist_lookup_nvlist(rec, ZPOOL_HIST_INPUT_NVL), 8); } if (nvlist_exists(rec, ZPOOL_HIST_OUTPUT_NVL)) { (void) printf(" output:\n"); dump_nvlist(fnvlist_lookup_nvlist(rec, ZPOOL_HIST_OUTPUT_NVL), 8); } } else { if (!cb->internal) continue; (void) printf("%s unrecognized record:\n", tbuf); dump_nvlist(rec, 4); } if (!cb->longfmt) { (void) printf("\n"); continue; } (void) printf(" ["); if (nvlist_exists(rec, ZPOOL_HIST_WHO)) { uid_t who = fnvlist_lookup_uint64(rec, ZPOOL_HIST_WHO); struct passwd *pwd = getpwuid(who); (void) printf("user %d ", (int)who); if (pwd != NULL) (void) printf("(%s) ", pwd->pw_name); } if (nvlist_exists(rec, ZPOOL_HIST_HOST)) { (void) printf("on %s", fnvlist_lookup_string(rec, ZPOOL_HIST_HOST)); } if (nvlist_exists(rec, ZPOOL_HIST_ZONE)) { (void) printf(":%s", fnvlist_lookup_string(rec, ZPOOL_HIST_ZONE)); } (void) printf("]"); (void) printf("\n"); } (void) printf("\n"); nvlist_free(nvhis); return (ret); } /* * zpool history * * Displays the history of commands that modified pools. */ int zpool_do_history(int argc, char **argv) { hist_cbdata_t cbdata = { 0 }; int ret; int c; cbdata.first = B_TRUE; /* check options */ while ((c = getopt(argc, argv, "li")) != -1) { switch (c) { case 'l': cbdata.longfmt = B_TRUE; break; case 'i': cbdata.internal = B_TRUE; break; case '?': (void) fprintf(stderr, gettext("invalid option '%c'\n"), optopt); usage(B_FALSE); } } argc -= optind; argv += optind; ret = for_each_pool(argc, argv, B_FALSE, NULL, get_history_one, &cbdata); if (argc == 0 && cbdata.first == B_TRUE) { (void) printf(gettext("no pools available\n")); return (0); } return (ret); } static int get_callback(zpool_handle_t *zhp, void *data) { zprop_get_cbdata_t *cbp = (zprop_get_cbdata_t *)data; char value[MAXNAMELEN]; zprop_source_t srctype; zprop_list_t *pl; for (pl = cbp->cb_proplist; pl != NULL; pl = pl->pl_next) { /* * Skip the special fake placeholder. This will also skip * over the name property when 'all' is specified. */ if (pl->pl_prop == ZPOOL_PROP_NAME && pl == cbp->cb_proplist) continue; if (pl->pl_prop == ZPROP_INVAL && (zpool_prop_feature(pl->pl_user_prop) || zpool_prop_unsupported(pl->pl_user_prop))) { srctype = ZPROP_SRC_LOCAL; if (zpool_prop_get_feature(zhp, pl->pl_user_prop, value, sizeof (value)) == 0) { zprop_print_one_property(zpool_get_name(zhp), cbp, pl->pl_user_prop, value, srctype, NULL, NULL); } } else { if (zpool_get_prop(zhp, pl->pl_prop, value, sizeof (value), &srctype, cbp->cb_literal) != 0) continue; zprop_print_one_property(zpool_get_name(zhp), cbp, zpool_prop_to_name(pl->pl_prop), value, srctype, NULL, NULL); } } return (0); } /* * zpool get [-Hp] [-o "all" | field[,...]] <"all" | property[,...]> ... * * -H Scripted mode. Don't display headers, and separate properties * by a single tab. * -o List of columns to display. Defaults to * "name,property,value,source". * -p Diplay values in parsable (exact) format. * * Get properties of pools in the system. Output space statistics * for each one as well as other attributes. */ int zpool_do_get(int argc, char **argv) { zprop_get_cbdata_t cb = { 0 }; zprop_list_t fake_name = { 0 }; int ret; int c, i; char *value; cb.cb_first = B_TRUE; /* * Set up default columns and sources. */ cb.cb_sources = ZPROP_SRC_ALL; cb.cb_columns[0] = GET_COL_NAME; cb.cb_columns[1] = GET_COL_PROPERTY; cb.cb_columns[2] = GET_COL_VALUE; cb.cb_columns[3] = GET_COL_SOURCE; cb.cb_type = ZFS_TYPE_POOL; /* check options */ while ((c = getopt(argc, argv, ":Hpo:")) != -1) { switch (c) { case 'p': cb.cb_literal = B_TRUE; break; case 'H': cb.cb_scripted = B_TRUE; break; case 'o': bzero(&cb.cb_columns, sizeof (cb.cb_columns)); i = 0; while (*optarg != '\0') { static char *col_subopts[] = { "name", "property", "value", "source", "all", NULL }; if (i == ZFS_GET_NCOLS) { (void) fprintf(stderr, gettext("too " "many fields given to -o " "option\n")); usage(B_FALSE); } switch (getsubopt(&optarg, col_subopts, &value)) { case 0: cb.cb_columns[i++] = GET_COL_NAME; break; case 1: cb.cb_columns[i++] = GET_COL_PROPERTY; break; case 2: cb.cb_columns[i++] = GET_COL_VALUE; break; case 3: cb.cb_columns[i++] = GET_COL_SOURCE; break; case 4: if (i > 0) { (void) fprintf(stderr, gettext("\"all\" conflicts " "with specific fields " "given to -o option\n")); usage(B_FALSE); } cb.cb_columns[0] = GET_COL_NAME; cb.cb_columns[1] = GET_COL_PROPERTY; cb.cb_columns[2] = GET_COL_VALUE; cb.cb_columns[3] = GET_COL_SOURCE; i = ZFS_GET_NCOLS; break; default: (void) fprintf(stderr, gettext("invalid column name " "'%s'\n"), value); usage(B_FALSE); } } break; case '?': (void) fprintf(stderr, gettext("invalid option '%c'\n"), optopt); usage(B_FALSE); } } argc -= optind; argv += optind; if (argc < 1) { (void) fprintf(stderr, gettext("missing property " "argument\n")); usage(B_FALSE); } if (zprop_get_list(g_zfs, argv[0], &cb.cb_proplist, ZFS_TYPE_POOL) != 0) usage(B_FALSE); argc--; argv++; if (cb.cb_proplist != NULL) { fake_name.pl_prop = ZPOOL_PROP_NAME; fake_name.pl_width = strlen(gettext("NAME")); fake_name.pl_next = cb.cb_proplist; cb.cb_proplist = &fake_name; } ret = for_each_pool(argc, argv, B_TRUE, &cb.cb_proplist, get_callback, &cb); if (cb.cb_proplist == &fake_name) zprop_free_list(fake_name.pl_next); else zprop_free_list(cb.cb_proplist); return (ret); } typedef struct set_cbdata { char *cb_propname; char *cb_value; boolean_t cb_any_successful; } set_cbdata_t; int set_callback(zpool_handle_t *zhp, void *data) { int error; set_cbdata_t *cb = (set_cbdata_t *)data; error = zpool_set_prop(zhp, cb->cb_propname, cb->cb_value); if (!error) cb->cb_any_successful = B_TRUE; return (error); } int zpool_do_set(int argc, char **argv) { set_cbdata_t cb = { 0 }; int error; if (argc > 1 && argv[1][0] == '-') { (void) fprintf(stderr, gettext("invalid option '%c'\n"), argv[1][1]); usage(B_FALSE); } if (argc < 2) { (void) fprintf(stderr, gettext("missing property=value " "argument\n")); usage(B_FALSE); } if (argc < 3) { (void) fprintf(stderr, gettext("missing pool name\n")); usage(B_FALSE); } if (argc > 3) { (void) fprintf(stderr, gettext("too many pool names\n")); usage(B_FALSE); } cb.cb_propname = argv[1]; cb.cb_value = strchr(cb.cb_propname, '='); if (cb.cb_value == NULL) { (void) fprintf(stderr, gettext("missing value in " "property=value argument\n")); usage(B_FALSE); } *(cb.cb_value) = '\0'; cb.cb_value++; error = for_each_pool(argc - 2, argv + 2, B_TRUE, NULL, set_callback, &cb); return (error); } static int find_command_idx(char *command, int *idx) { int i; for (i = 0; i < NCOMMAND; i++) { if (command_table[i].name == NULL) continue; if (strcmp(command, command_table[i].name) == 0) { *idx = i; return (0); } } return (1); } int main(int argc, char **argv) { int ret = 0; int i; char *cmdname; (void) setlocale(LC_ALL, ""); (void) textdomain(TEXT_DOMAIN); if ((g_zfs = libzfs_init()) == NULL) { (void) fprintf(stderr, gettext("internal error: failed to " "initialize ZFS library\n")); return (1); } libzfs_print_on_error(g_zfs, B_TRUE); opterr = 0; /* * Make sure the user has specified some command. */ if (argc < 2) { (void) fprintf(stderr, gettext("missing command\n")); usage(B_FALSE); } cmdname = argv[1]; /* * Special case '-?' */ if (strcmp(cmdname, "-?") == 0) usage(B_TRUE); zfs_save_arguments(argc, argv, history_str, sizeof (history_str)); /* * Run the appropriate command. */ if (find_command_idx(cmdname, &i) == 0) { current_command = &command_table[i]; ret = command_table[i].func(argc - 1, argv + 1); } else if (strchr(cmdname, '=')) { verify(find_command_idx("set", &i) == 0); current_command = &command_table[i]; ret = command_table[i].func(argc, argv); } else if (strcmp(cmdname, "freeze") == 0 && argc == 3) { /* * 'freeze' is a vile debugging abomination, so we treat * it as such. */ char buf[16384]; int fd = open(ZFS_DEV, O_RDWR); (void) strcpy((void *)buf, argv[2]); return (!!ioctl(fd, ZFS_IOC_POOL_FREEZE, buf)); } else { (void) fprintf(stderr, gettext("unrecognized " "command '%s'\n"), cmdname); usage(B_FALSE); } if (ret == 0 && log_history) (void) zpool_log_history(g_zfs, history_str); libzfs_fini(g_zfs); /* * The 'ZFS_ABORT' environment variable causes us to dump core on exit * for the purposes of running ::findleaks. */ if (getenv("ZFS_ABORT") != NULL) { (void) printf("dumping core by request\n"); abort(); } return (ret); }