/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2014 Garrett D'Amore * Copyright 2012 DEY Storage Systems, Inc. * Copyright (c) 2018, Joyent, Inc. * * Portions of this file developed by DEY Storage Systems, Inc. are licensed * under the terms of the Common Development and Distribution License (CDDL) * version 1.0 only. The use of subsequent versions of the License are * is specifically prohibited unless those terms are not in conflict with * version 1.0 of the License. You can find this license on-line at * http://www.illumos.org/license/CDDL */ /* * Copyright 2008 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ /* Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T */ /* All Rights Reserved */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "getresponse.h" #define HEAD 0 #define TAIL 1 #define FALSE 0 #define TRUE 1 #define MAXSBUF 255 #define MAXIBUF 512 #define MAXINSERTS 5 #define BUFSIZE LINE_MAX #define MAXARGS 255 #define INSPAT_STR "{}" /* default replstr string for -[Ii] */ #define FORK_RETRY 5 #define QBUF_STARTLEN 255 /* start size of growable string buffer */ #define QBUF_INC 100 /* how much to grow a growable string by */ /* We use these macros to help make formatting look "consistent" */ #define EMSG(s) ermsg(gettext(s "\n")) #define EMSG2(s, a) ermsg(gettext(s "\n"), a) #define PERR(s) perror(gettext("xargs: " s)) /* Some common error messages */ #define LIST2LONG "Argument list too long" #define ARG2LONG "A single argument was greater than %d bytes" #define MALLOCFAIL "Memory allocation failure" #define CORRUPTFILE "Corrupt input file" #define WAITFAIL "Wait failure" #define CHILDSIG "Child killed with signal %d" #define CHILDFAIL "Command could not continue processing data" #define FORKFAIL "Could not fork child" #define EXECFAIL "Could not exec command" #define MISSQUOTE "Missing quote" #define BADESCAPE "Incomplete escape" #define IBUFOVERFLOW "Insert buffer overflow" #define NOCHILDSLOT "No free child slot available" #define _(x) gettext(x) static wctype_t blank; static char *arglist[MAXARGS+1]; static char argbuf[BUFSIZE * 2 + 1]; static char lastarg[BUFSIZE + 1]; static char **ARGV = arglist; static char *LEOF = "_"; static char *INSPAT = INSPAT_STR; static char ins_buf[MAXIBUF]; static char *p_ibuf; static struct inserts { char **p_ARGV; /* where to put newarg ptr in arg list */ char *p_skel; /* ptr to arg template */ } saveargv[MAXINSERTS]; static int PROMPT = -1; static int BUFLIM = BUFSIZE; static int MAXPROCS = 1; static int N_ARGS = 0; static int N_args = 0; static int N_lines = 0; static int DASHX = FALSE; static int MORE = TRUE; static int PER_LINE = FALSE; static int LINE_CONT = FALSE; static int EAT_LEAD = FALSE; static int ERR = FALSE; static int OK = TRUE; static int LEGAL = FALSE; static int TRACE = FALSE; static int INSERT = FALSE; static int ZERO = FALSE; static int linesize = 0; static int ibufsize = 0; static int exitstat = 0; /* our exit status */ static int mac; /* modified argc, after parsing */ static char **mav; /* modified argv, after parsing */ static int n_inserts; /* # of insertions. */ static pid_t *procs; /* pids of children */ static int n_procs; /* # of child processes. */ /* our usage message: */ #define USAGEMSG "Usage: xargs: [-t] [-p] [-0] [-e[eofstr]] [-E eofstr] "\ "[-I replstr] [-i[replstr]] [-L #] [-l[#]] [-n # [-x]] [-P maxprocs] "\ "[-s size] [cmd [args ...]]\n" static int echoargs(); static wint_t getwchr(char *, size_t *); static void lcall(char *sub, char **subargs); static void addibuf(struct inserts *p); static void ermsg(char *messages, ...); static char *addarg(char *arg); static void store_str(char **, char *, size_t); static char *getarg(char *); static char *insert(char *pattern, char *subst); static void usage(); static void parseargs(); static int procs_find(pid_t child); static void procs_store(pid_t child); static boolean_t procs_delete(pid_t child); static pid_t procs_waitpid(boolean_t blocking, int *stat_loc); static void procs_wait(boolean_t blocking); int main(int argc, char **argv) { int j; long l; struct inserts *psave; int c; int initsize; char *cmdname, **initlist; char *arg; char *next; char *eptr; /* initialization */ blank = wctype("blank"); n_inserts = 0; psave = saveargv; (void) setlocale(LC_ALL, ""); #if !defined(TEXT_DOMAIN) /* Should be defined by cc -D */ #define TEXT_DOMAIN "SYS_TEST" /* Use this only if it weren't */ #endif (void) textdomain(TEXT_DOMAIN); if (init_yes() < 0) { ermsg(_(ERR_MSG_INIT_YES), strerror(errno)); exit(1); } parseargs(argc, argv); /* handling all of xargs arguments: */ while ((c = getopt(mac, mav, "0tpe:E:I:i:L:l:n:P:s:x")) != EOF) { switch (c) { case '0': ZERO = TRUE; break; case 't': /* -t: turn trace mode on */ TRACE = TRUE; break; case 'p': /* -p: turn on prompt mode. */ if ((PROMPT = open("/dev/tty", O_RDONLY)) == -1) { PERR("can't read from tty for -p"); } else { TRACE = TRUE; } break; case 'e': /* * -e[eofstr]: set/disable end-of-file. * N.B. that an argument *isn't* required here; but * parseargs forced an argument if not was given. The * forced argument is the default... */ LEOF = optarg; /* can be empty */ break; case 'E': /* * -E eofstr: change end-of-file string. * eofstr *is* required here, but can be empty: */ LEOF = optarg; break; case 'I': /* -I replstr: Insert mode. replstr *is* required. */ INSERT = PER_LINE = LEGAL = EAT_LEAD = TRUE; LINE_CONT = FALSE; N_ARGS = 0; INSPAT = optarg; if (*optarg == '\0') { ermsg(_("Option requires an argument: -%c\n"), c); } break; case 'i': /* * -i [replstr]: insert mode, with *optional* replstr. * N.B. that an argument *isn't* required here; if * it's not given, then the string INSPAT_STR will * be assumed. * * Since getopts(3C) doesn't handle the case of an * optional variable argument at all, we have to * parse this by hand: */ INSERT = PER_LINE = LEGAL = EAT_LEAD = TRUE; LINE_CONT = FALSE; N_ARGS = 0; if ((optarg != NULL) && (*optarg != '\0')) { INSPAT = optarg; } else { /* * here, there is no next argument. so * we reset INSPAT to the INSPAT_STR. * we *have* to do this, as -i/I may have * been given previously, and XCU4 requires * that only "the last one specified takes * effect". */ INSPAT = INSPAT_STR; } break; case 'L': /* * -L number: # of times cmd is executed * number *is* required here: */ PER_LINE = LINE_CONT = TRUE; N_ARGS = 0; INSERT = EAT_LEAD = FALSE; if ((PER_LINE = atoi(optarg)) <= 0) { ermsg(_("#lines must be positive int: %s\n"), optarg); } break; case 'l': /* * -l [number]: # of times cmd is executed * N.B. that an argument *isn't* required here; if * it's not given, then 1 is assumed. * * parseargs handles the optional arg processing. */ PER_LINE = LINE_CONT = LEGAL = TRUE; N_ARGS = 0; INSERT = EAT_LEAD = FALSE; if ((optarg != NULL) && (*optarg != '\0')) { if ((PER_LINE = atoi(optarg)) <= 0) PER_LINE = 1; } break; case 'n': /* -n number: # stdin args */ /* * -n number: # stdin args. * number *is* required here: */ if ((N_ARGS = atoi(optarg)) <= 0) { ermsg(_("#args must be positive int: %s\n"), optarg); } else { LEGAL = DASHX || N_ARGS == 1; INSERT = PER_LINE = LINE_CONT = FALSE; } break; case 'P': /* -P maxprocs: # of child processses */ errno = 0; l = strtol(optarg, &eptr, 10); if (*eptr != '\0' || errno != 0) { ermsg(_("failed to parse maxprocs (-P): %s\n"), optarg); break; } if (l < 0) { ermsg(_("maximum number of processes (-P) " "cannot be negative\n")); break; } /* * Come up with an upper bound that'll probably fit in * memory. */ if (l == 0 || l > ((INT_MAX / sizeof (pid_t) >> 1))) { l = INT_MAX / sizeof (pid_t) >> 1; } MAXPROCS = (int)l; break; case 's': /* -s size: set max size of each arg list */ BUFLIM = atoi(optarg); if (BUFLIM > BUFSIZE || BUFLIM <= 0) { ermsg(_("0 < max-cmd-line-size <= %d: %s\n"), BUFSIZE, optarg); } break; case 'x': /* -x: terminate if args > size limit */ DASHX = LEGAL = TRUE; break; default: /* * bad argument. complain and get ready to die. */ usage(); exit(2); break; } } /* * if anything called ermsg(), something screwed up, so * we exit early. */ if (OK == FALSE) { usage(); exit(2); } /* * we're finished handling xargs's options, so now pick up * the command name (if any), and it's options. */ mac -= optind; /* dec arg count by what we've processed */ mav += optind; /* inc to current mav */ procs = calloc(MAXPROCS, sizeof (pid_t)); if (procs == NULL) { PERR(MALLOCFAIL); exit(1); } if (mac <= 0) { /* if there're no more args to process, */ cmdname = "/usr/bin/echo"; /* our default command */ *ARGV++ = addarg(cmdname); /* use the default cmd. */ } else { /* otherwise keep parsing rest of the string. */ /* * note that we can't use getopts(3C), and *must* parse * this by hand, as we don't know apriori what options the * command will take. */ cmdname = *mav; /* get the command name */ /* pick up the remaining args from the command line: */ while ((OK == TRUE) && (mac-- > 0)) { /* * while we haven't crapped out, and there's * work to do: */ if (INSERT && ! ERR) { if (strstr(*mav, INSPAT) != NULL) { if (++n_inserts > MAXINSERTS) { ermsg(_("too many args " "with %s\n"), INSPAT); ERR = TRUE; } psave->p_ARGV = ARGV; (psave++)->p_skel = *mav; } } *ARGV++ = addarg(*mav++); } } /* pick up args from standard input */ initlist = ARGV; initsize = linesize; lastarg[0] = '\0'; while (OK) { N_args = 0; N_lines = 0; ARGV = initlist; linesize = initsize; next = argbuf; while (MORE || (lastarg[0] != '\0')) { int l; if (*lastarg != '\0') { arg = strcpy(next, lastarg); *lastarg = '\0'; } else if ((arg = getarg(next)) == NULL) { break; } l = strlen(arg) + 1; linesize += l; next += l; /* Inserts are handled specially later. */ if ((n_inserts == 0) && (linesize >= BUFLIM)) { /* * Legal indicates hard fail if the list is * truncated due to size. So fail, or if we * cannot create any list because it would be * too big. */ if (LEGAL || N_args == 0) { EMSG(LIST2LONG); procs_wait(B_TRUE); exit(2); /* NOTREACHED */ } /* * Otherwise just save argument for later. */ (void) strcpy(lastarg, arg); break; } *ARGV++ = arg; N_args++; if ((PER_LINE && (N_lines >= PER_LINE)) || (N_ARGS && (N_args >= N_ARGS))) { break; } if ((ARGV - arglist) == MAXARGS) { break; } } *ARGV = NULL; if (N_args == 0) { /* Reached the end with no more work. */ break; } /* insert arg if requested */ if (!ERR && INSERT) { p_ibuf = ins_buf; ARGV--; j = ibufsize = 0; for (psave = saveargv; ++j <= n_inserts; ++psave) { addibuf(psave); if (ERR) break; } } *ARGV = NULL; if (n_inserts > 0) { /* * if we've done any insertions, re-calculate the * linesize. bomb out if we've exceeded our length. */ linesize = 0; for (ARGV = arglist; *ARGV != NULL; ARGV++) { linesize += strlen(*ARGV) + 1; } if (linesize >= BUFLIM) { EMSG(LIST2LONG); procs_wait(B_TRUE); exit(2); /* NOTREACHED */ } } /* exec command */ if (!ERR) { if (!MORE && (PER_LINE && N_lines == 0 || N_ARGS && N_args == 0)) exit(exitstat); OK = TRUE; j = TRACE ? echoargs() : TRUE; if (j) { /* * for xcu4, all invocations of cmdname must * return 0, in order for us to return 0. * so if we have a non-zero status here, * quit immediately. */ (void) lcall(cmdname, arglist); } } } procs_wait(B_TRUE); if (OK) return (exitstat); /* * if exitstat was set, to match XCU4 complience, * return that value, otherwise, return 1. */ return (exitstat ? exitstat : 1); } static char * addarg(char *arg) { linesize += (strlen(arg) + 1); return (arg); } static void store_str(char **buffer, char *str, size_t len) { (void) memcpy(*buffer, str, len); (*buffer)[len] = '\0'; *buffer += len; } static char * getarg(char *arg) { char *xarg = arg; wchar_t c = 0; char mbc[MB_LEN_MAX]; size_t len; int escape = 0; int inquote = 0; int last = 0; arg[0] = '\0'; while (MORE) { len = 0; last = c; c = getwchr(mbc, &len); if (((arg - xarg) + len) > BUFLIM) { EMSG2(ARG2LONG, BUFLIM); exit(2); ERR = TRUE; return (NULL); } switch (c) { case '\n': if (ZERO) { store_str(&arg, mbc, len); continue; } /* * NB: Some other versions rip off all of the trailing * blanks. The spec only claims that this should * be done for a single blank. We follow the spec. */ if (LINE_CONT && iswctype(last, blank)) { len = 0; *arg = 0; continue; } /* FALLTHRU */ case '\0': case WEOF: /* Note WEOF == EOF */ if (escape) { EMSG(BADESCAPE); ERR = TRUE; return (NULL); } if (inquote) { EMSG(MISSQUOTE); ERR = TRUE; return (NULL); } N_lines++; break; case '"': if (ZERO || escape || (inquote == 1)) { /* treat it literally */ escape = 0; store_str(&arg, mbc, len); } else if (inquote == 2) { /* terminating double quote */ inquote = 0; } else { /* starting quoted string */ inquote = 2; } continue; case '\'': if (ZERO || escape || (inquote == 2)) { /* treat it literally */ escape = 0; store_str(&arg, mbc, len); } else if (inquote == 1) { /* terminating single quote */ inquote = 0; } else { /* starting quoted string */ inquote = 1; } continue; case '\\': /* * Any unquoted character can be escaped by * preceding it with a backslash. */ if (ZERO || inquote || escape) { escape = 0; store_str(&arg, mbc, len); } else { escape = 1; } continue; default: /* most times we will just want to store it */ if (inquote || escape || ZERO || !iswctype(c, blank)) { escape = 0; store_str(&arg, mbc, len); continue; } if (EAT_LEAD && last == 0) { c = 0; /* Roll it back */ continue; } if (PER_LINE) { store_str(&arg, mbc, len); continue; } /* unquoted blank without special handling */ break; } /* * At this point we are processing a complete argument. */ if (strcmp(xarg, LEOF) == 0 && *LEOF != '\0') { MORE = FALSE; return (NULL); } if (c == WEOF) { MORE = FALSE; } if (xarg[0] == '\0') continue; break; } return (xarg[0] == '\0' ? NULL : xarg); } /* * ermsg(): print out an error message, and indicate failure globally. * * Assumes that message has already been gettext()'d. It would be * nice if we could just do the gettext() here, but we can't, since * since xgettext(1) wouldn't be able to pick up our error message. */ /* PRINTFLIKE1 */ static void ermsg(char *messages, ...) { va_list ap; va_start(ap, messages); (void) fprintf(stderr, "xargs: "); (void) vfprintf(stderr, messages, ap); va_end(ap); OK = FALSE; } static int echoargs(void) { char **anarg; char **tanarg; /* tmp ptr */ int i; char reply[LINE_MAX]; tanarg = anarg = arglist-1; /* * write out each argument, separated by a space. the tanarg * nonsense is for xcu4 testsuite compliance - so that an * extra space isn't echoed after the last argument. */ while (*++anarg) { /* while there's an argument */ ++tanarg; /* follow anarg */ (void) write(2, *anarg, strlen(*anarg)); if (*++tanarg) { /* if there's another argument: */ (void) write(2, " ", 1); /* add a space */ --tanarg; /* reset back to anarg */ } } if (PROMPT == -1) { (void) write(2, "\n", 1); return (TRUE); } (void) write(2, "?...", 4); /* ask the user for input */ for (i = 0; i < LINE_MAX && read(PROMPT, &reply[i], 1) > 0; i++) { if (reply[i] == '\n') { if (i == 0) return (FALSE); break; } } if (i < LINE_MAX) reply[i] = '\0'; else reply[LINE_MAX - 1] = '\0'; /* flush remainder of line if necessary */ if (i == LINE_MAX) { char bitbucket; while ((read(PROMPT, &bitbucket, 1) > 0) && (bitbucket != '\n')) ; } return (yes_check(reply)); } static char * insert(char *pattern, char *subst) { static char buffer[MAXSBUF+1]; int len, ipatlen; char *pat; char *bufend; char *pbuf; len = strlen(subst); ipatlen = strlen(INSPAT) - 1; pat = pattern - 1; pbuf = buffer; bufend = &buffer[MAXSBUF]; while (*++pat) { if (strncmp(pat, INSPAT, ipatlen + 1) == 0) { if (pbuf + len >= bufend) { break; } else { (void) strcpy(pbuf, subst); pat += ipatlen; pbuf += len; } } else { *pbuf++ = *pat; if (pbuf >= bufend) break; } } if (!*pat) { *pbuf = '\0'; return (buffer); } else { ermsg(gettext("Maximum argument size with insertion via %s's " "exceeded\n"), INSPAT); ERR = TRUE; return (NULL); } } static void addibuf(struct inserts *p) { char *newarg, *skel, *sub; int l; skel = p->p_skel; sub = *ARGV; newarg = insert(skel, sub); if (ERR) return; l = strlen(newarg) + 1; if ((ibufsize += l) > MAXIBUF) { EMSG(IBUFOVERFLOW); ERR = TRUE; } (void) strcpy(p_ibuf, newarg); *(p->p_ARGV) = p_ibuf; p_ibuf += l; } /* * getwchr(): get the next wide character. * description: * we get the next character from stdin. This returns WEOF if no * character is present. If ZERO is set, it gets a single byte instead * a wide character. */ static wint_t getwchr(char *mbc, size_t *sz) { size_t i; int c; wchar_t wch; i = 0; while (i < MB_CUR_MAX) { if ((c = fgetc(stdin)) == EOF) { if (i == 0) { /* TRUE EOF has been reached */ return (WEOF); } /* * We have some characters in our buffer still so it * must be an invalid character right before EOF. */ break; } mbc[i++] = (char)c; /* If this succeeds then we are done */ if (ZERO) { *sz = i; return ((char)c); } if (mbtowc(&wch, mbc, i) != -1) { *sz = i; return ((wint_t)wch); } } /* * We have now encountered an illegal character sequence. * There is nothing much we can do at this point but * return an error. If we attempt to recover we may in fact * return garbage as arguments, from the customer's point * of view. After all what if they are feeding us a file * generated in another locale? */ errno = EILSEQ; PERR(CORRUPTFILE); exit(1); /* NOTREACHED */ } static void lcall(char *sub, char **subargs) { int retry = 0; pid_t child; for (;;) { switch (child = forkx(FORK_NOSIGCHLD)) { default: procs_store(child); /* * Note, if we have used up all of our slots, then this * call may end up blocking. */ procs_wait(B_FALSE); return; case 0: (void) execvp(sub, subargs); PERR(EXECFAIL); if (errno == EACCES) exit(126); exit(127); /* NOTREACHED */ case -1: if (errno != EAGAIN && retry++ < FORK_RETRY) { PERR(FORKFAIL); exit(123); } (void) sleep(1); } } } /* * Return the index of child in the procs array. */ static int procs_find(pid_t child) { int i; for (i = 0; i < MAXPROCS; i++) { if (procs[i] == child) { return (i); } } return (-1); } static void procs_store(pid_t child) { int i; i = procs_find(0); if (i < 0) { EMSG(NOCHILDSLOT); exit(1); } procs[i] = child; n_procs++; } static boolean_t procs_delete(pid_t child) { int i; i = procs_find(child); if (i < 0) { return (B_FALSE); } procs[i] = (pid_t)0; n_procs--; return (B_TRUE); } static pid_t procs_waitpid(boolean_t blocking, int *stat_loc) { pid_t child; int options; if (n_procs == 0) { errno = ECHILD; return (-1); } options = 0; if (!blocking) { options |= WNOHANG; } while ((child = waitpid((pid_t)-1, stat_loc, options)) > 0) { if (procs_delete(child)) { break; } } return (child); } static void procs_wait(boolean_t blocking) { pid_t child; int stat_loc; /* * If we currently have filled all of our slots, then we need to block * further execution. */ if (n_procs >= MAXPROCS) blocking = B_TRUE; while ((child = procs_waitpid(blocking, &stat_loc)) > 0) { if (WIFSIGNALED(stat_loc)) { EMSG2(CHILDSIG, WTERMSIG(stat_loc)); exit(125); /* NOTREACHED */ } else if ((WEXITSTATUS(stat_loc) & 0377) == 0377) { EMSG(CHILDFAIL); exit(124); /* NOTREACHED */ } else { exitstat |= WEXITSTATUS(stat_loc); } } if (child == (pid_t)(-1) && errno != ECHILD) { EMSG(WAITFAIL); exit(122); /* NOTREACHED */ } } static void usage() { ermsg(_(USAGEMSG)); OK = FALSE; } /* * parseargs(): modify the args * since the -e, -i and -l flags all take optional subarguments, * and getopts(3C) is clueless about this nonsense, we change the * our local argument count and strings to separate this out, * and make it easier to handle via getopts(3c). * * -e -> "-e "" * -e3 -> "-e "3" * -Estr -> "-E "str" * -i -> "-i "{}" * -irep -> "-i "rep" * -l -> "-l "1" * -l10 -> "-l "10" * * since the -e, -i and -l flags all take optional subarguments, */ static void parseargs(int ac, char **av) { int i; /* current argument */ int cflag; /* 0 = not processing cmd arg */ if ((mav = malloc((ac * 2 + 1) * sizeof (char *))) == NULL) { PERR(MALLOCFAIL); exit(1); } /* for each argument, see if we need to change things: */ for (i = mac = cflag = 0; (av[i] != NULL) && i < ac; i++, mac++) { if ((mav[mac] = strdup(av[i])) == NULL) { PERR(MALLOCFAIL); exit(1); } /* -- has been found or argument list is fully processes */ if (cflag) continue; /* * if we're doing special processing, and we've got a flag */ else if ((av[i][0] == '-') && (av[i][1] != '\0')) { char *def; switch (av[i][1]) { case 'e': def = ""; /* -e with no arg turns off eof */ goto process_special; case 'i': def = INSPAT_STR; goto process_special; case 'l': def = "1"; process_special: /* * if there's no sub-option, we *must* add * a default one. this is because xargs must * be able to distinguish between a valid * suboption, and a command name. */ if (av[i][2] == '\0') { mav[++mac] = strdup(def); } else { /* clear out our version: */ mav[mac][2] = '\0'; mav[++mac] = strdup(&av[i][2]); } if (mav[mac] == NULL) { PERR(MALLOCFAIL); exit(1); } break; /* flags with required subarguments: */ /* * there are two separate cases here. either the * flag can have the normal XCU4 handling * (of the form: -X subargument); or it can have * the old solaris 2.[0-4] handling (of the * form: -Xsubargument). in order to maintain * backwards compatibility, we must support the * latter case. we handle the latter possibility * first so both the old solaris way of handling * and the new XCU4 way of handling things are allowed. */ case 'n': /* FALLTHROUGH */ case 'P': /* FALLTHROUGH */ case 's': /* FALLTHROUGH */ case 'E': /* FALLTHROUGH */ case 'I': /* FALLTHROUGH */ case 'L': /* * if the second character isn't null, then * the user has specified the old syntax. * we move the subargument into our * mod'd argument list. */ if (av[i][2] != '\0') { /* first clean things up: */ mav[mac][2] = '\0'; /* now add the separation: */ ++mac; /* inc to next mod'd arg */ if ((mav[mac] = strdup(&av[i][2])) == NULL) { PERR(MALLOCFAIL); exit(1); } break; } i++; mac++; if (av[i] == NULL) { mav[mac] = NULL; return; } if ((mav[mac] = strdup(av[i])) == NULL) { PERR(MALLOCFAIL); exit(1); } break; /* flags */ case 'p' : case 't' : case 'x' : case '0' : break; case '-' : default: /* * here we've hit the cmd argument. so * we'll stop special processing, as the * cmd may have a "-i" etc., argument, * and we don't want to add a "" to it. */ cflag = 1; break; } } else if (i > 0) { /* if we're not the 1st arg */ /* * if it's not a flag, then it *must* be the cmd. * set cflag, so we don't mishandle the -[eil] flags. */ cflag = 1; } } mav[mac] = NULL; }