#!/sbin/sh
#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
#
# Copyright (c) 2007, 2010, Oracle and/or its affiliates. All rights reserved.
# Copyright 2012 Milan Jurik. All rights reserved.
#

. /lib/svc/share/smf_include.sh
. /lib/svc/share/net_include.sh

# FMRI constants
IPSEC_IKE_FMRI="svc:/network/ipsec/ike"
IPSEC_POLICY_FMRI="svc:/network/ipsec/policy"
IPFILTER_FMRI="svc:/network/ipfilter:default"
NIS_CLIENT_FMRI="svc:/network/nis/client:default"
NET_PHYS_FMRI="svc:/network/physical:default"
NET_NWAM_FMRI="svc:/network/physical:nwam"
NET_LOC_FMRI="svc:/network/location:default"
NFS_MAPID_FMRI="svc:/network/nfs/mapid:default"

#
# Default *.conf files
# Set appropriate config SMF property to these files when NWAM is stopped
# and corresponding config properties in the Legacy location are emtpy
#
IPF6_DEFAULT_CONFIG_FILE=/etc/ipf/ipf6.conf
IPNAT_DEFAULT_CONFIG_FILE=/etc/ipf/ipnat.conf
IPPOOL_DEFAULT_CONFIG_FILE=/etc/ipf/ippool.conf
IPSEC_IKE_DEFAULT_CONFIG_FILE=/etc/inet/ike/config
IPSEC_POLICY_DEFAULT_CONFIG_FILE=/etc/inet/ipsecinit.conf

# commands
BASENAME=/usr/bin/basename
CAT=/usr/bin/cat
CP=/usr/bin/cp
DOMAINNAME=/usr/bin/domainname
GREP=/usr/bin/grep
LDAPCLIENT=/usr/sbin/ldapclient
MKDIR=/usr/bin/mkdir
MKFIFO=/usr/bin/mkfifo
NAWK=/usr/bin/nawk
NWAMCFG=/usr/sbin/nwamcfg
RM=/usr/bin/rm
SVCADM=/usr/sbin/svcadm
SVCCFG=/usr/sbin/svccfg
SVCPROP=/usr/bin/svcprop

# Path to directories
# We don't have a writable file system so we write to /etc/svc/volatile and
# then later copy anything interesting to /etc/nwam.
VOL_NWAM_PATH=/etc/svc/volatile/nwam
VOL_LEGACY_PATH=$VOL_NWAM_PATH/Legacy
PERM_LEGACY_PATH=/etc/nwam/loc/Legacy
NIS_BIND_PATH=/var/yp/binding

#
# copy_to_legacy_loc <file>
#
# Copies the file to the Legacy location directory
# (in /etc/svc/volatile/nwam/Legacy)
#
copy_to_legacy_loc() {
	$MKDIR -p $VOL_LEGACY_PATH
	if [ -f "$1" ]; then
		$CP -p $1 $VOL_LEGACY_PATH
	fi
}

#
# copy_from_legacy_loc <destination file>
#
# Copies file with the same name from Legacy location
# (in /etc/nwam/loc/Legacy) to the given destination file
#
copy_from_legacy_loc () {
	DEST_DIR=`/usr/bin/dirname $1`
	SRC_FILE="$PERM_LEGACY_PATH/`$BASENAME $1`"

	# Make destination directory if needed
	if [ ! -d "$DEST_DIR" ]; then
		$MKDIR -p $DEST_DIR
	fi

	if [ -f "$SRC_FILE" ]; then
		$CP -p $SRC_FILE $DEST_DIR
	fi
}

#
# write_loc_prop <property> <value> <file>
#
# Appends to <file> a nwamcfg command to set <property> to <value> if non-empty
#
write_loc_prop () {
	prop=$1
	val=$2
	file=$3

	if [ -n "$val" -a -n "$file" ]; then
		echo "set $prop=$val" >> $file
	fi
}

#
# set_smf_prop <fmri> <property name> <property value>
#
set_smf_prop () {
	$SVCCFG -s $1 setprop $2 = astring: "$3" && return
}

#
# get_smf_prop <fmri> <property name>
#
get_smf_prop () {
	$SVCPROP -p $2 $1
}

#
# Creates Legacy location from the current configuration
#
create_legacy_loc () {
	CREATE_LOC_LEGACY_FILE=$VOL_NWAM_PATH/create_loc_legacy

	#
	# Write nwamcfg commands to create Legacy location to
	# $CREATE_LOC_LEGACY_FILE as values for properties are determined
	# Note that some of the *_CONFIG_FILE variables point at copies of
	# files we've made and others indicate where those copies should be
	# if we are enabling the location.
	#
	echo "create loc Legacy" > $CREATE_LOC_LEGACY_FILE
	write_loc_prop "activation-mode" "system" $CREATE_LOC_LEGACY_FILE

	NAMESERVICES=""
	NAMESERVICES_CONFIG_FILE=""
	DNS_NAMESERVICE_CONFIGSRC=""
	DNS_NAMESERVICE_DOMAIN=""
	DNS_NAMESERVICE_SERVERS=""
	DNS_NAMESERVICE_SEARCH=""
	NIS_NAMESERVICE_CONFIGSRC=""
	NIS_NAMESERVICE_SERVERS=""
	LDAP_NAMESERVICE_CONFIGSRC=""
	LDAP_NAMESERVICE_SERVERS=""
	DEFAULT_DOMAIN=""

	# Copy /etc/nsswitch.conf file
	copy_to_legacy_loc /etc/nsswitch.conf
	NAMESERVICES_CONFIG_FILE="$VOL_LEGACY_PATH/nsswitch.conf"
	
	# Gather DNS info from resolv.conf if present.
	if [ -f /etc/resolv.conf ]; then
		NAMESERVICES="dns,"
		$GREP -i "added by dhcp" /etc/nsswitch.conf >/dev/null
		if [ $? -eq 0 ]; then
			DNS_NAMESERVICE_CONFIGSRC="dhcp"
		else
			DNS_NAMESERVICE_CONFIGSRC="manual"
			DNS_NAMESERVICE_DOMAIN=`$NAWK '$1 == "domain" {\
			    print $2 }' < /etc/resolv.conf`
			DNS_NAMESERVICE_SERVERS=`$NAWK '$1 == "nameserver" \
			    { printf "%s,", $2 }' < /etc/resolv.conf`
			DNS_NAMESERVICE_SEARCH=`$NAWK '$1 == "search" \
			    { printf "%s,", $2 }' < /etc/resolv.conf`
			copy_to_legacy_loc /etc/resolv.conf
		fi
	fi

	# Gather NIS info from appropriate file if present.
	if service_is_enabled $NIS_CLIENT_FMRI; then
		NAMESERVICES="${NAMESERVICES}nis,"
		NIS_NAMESERVICE_CONFIGSRC="manual"
		DEFAULT_DOMAIN=`$CAT /etc/defaultdomain`

		yp_servers=`$NAWK '{ printf "%s ", $1 }' \
		    < $NIS_BIND_PATH/$DEFAULT_DOMAIN/ypservers`
		for serv in $yp_servers; do
			if is_valid_addr $serv; then
				addr="$serv,"
			else
				addr=`$GREP -iw $serv /etc/inet/hosts | \
				    $NAWK '{ printf "%s,", $1 }'`
			fi
			NIS_NAMESERVICE_SERVERS="${NIS_NAMESERVICE_SERVERS}$addr"
		done
	fi

	# Gather LDAP info via ldapclient(8).
	if [ -f /var/ldap/ldap_client_file ]; then
		copy_to_legacy /var/ldap/ldap_client_file
		NAMESERVICES="${NAMESERVICES}ldap,"
		LDAP_NAMESERVICE_CONFIGSRC="manual"
		LDAP_NAMESERVICE_SERVERS=`$LDAPCLIENT list 2>/dev/null | \
		    $NAWK '$1 == "preferredServerList:" { print $2 }'`
		DEFAULT_DOMAIN=`$CAT /etc/defaultdomain`
	fi

	# Now, write nwamcfg commands for nameservices
	write_loc_prop "nameservices" $NAMESERVICES $CREATE_LOC_LEGACY_FILE
 	write_loc_prop "nameservices-config-file" $NAMESERVICES_CONFIG_FILE \
 	    $CREATE_LOC_LEGACY_FILE
	write_loc_prop "dns-nameservice-configsrc" $DNS_NAMESERVICE_CONFIGSRC \
	    $CREATE_LOC_LEGACY_FILE
	write_loc_prop "dns-nameservice-domain" $DNS_NAMESERVICE_DOMAIN \
 	    $CREATE_LOC_LEGACY_FILE
	write_loc_prop "dns-nameservice-servers" $DNS_NAMESERVICE_SERVERS \
	    $CREATE_LOC_LEGACY_FILE
	write_loc_prop "dns-nameservice-search" $DNS_NAMESERVICE_SEARCH \
	    $CREATE_LOC_LEGACY_FILE
	write_loc_prop "nis-nameservice-configsrc" $NIS_NAMESERVICE_CONFIGSRC \
	    $CREATE_LOC_LEGACY_FILE
	write_loc_prop "nis-nameservice-servers" $NIS_NAMESERVICE_SERVERS \
	    $CREATE_LOC_LEGACY_FILE
	write_loc_prop "ldap-nameservice-configsrc" $LDAP_NAMESERVICE_CONFIGSRC\
	    $CREATE_LOC_LEGACY_FILE
	write_loc_prop "ldap-nameservice-servers" $LDAP_NAMESERVICE_SERVERS \
	    $CREATE_LOC_LEGACY_FILE
	write_loc_prop "default-domain" $DEFAULT_DOMAIN $CREATE_LOC_LEGACY_FILE

	# Retrieve NFSv4 domain from SMF.
	if service_is_enabled $NFS_MAPID_FMRI; then
		NFS_DOMAIN=`get_smf_prop NFS_MAPID_FMRI \
		    nfs-props/nfsmapid_domain`    
		write_loc_prop "nfsv4-domain" \
		    $NFS_DOMAIN $CREATE_LOC_LEGACY_FILE
	fi

	IPF_CONFIG_FILE=""
	IPF6_CONFIG_FILE=""
	IPNAT_CONFIG_FILE=""
	IPPOOL_CONFIG_FILE=""
	IKE_CONFIG_FILE=""
	IPSEC_POLICY_CONFIG_FILE=""

	#
	# IPFilter
	#
	# If the firewall policy is "custom", simply copy the
	# custom_policy_file.  If the firewall policy is "none", "allow" or
	# "deny", save the value as "/<value>".  When reverting back to the
	# Legacy location, these values will have to be treated as special.
	#
	# For all configuration files, copy them to the Legacy directory.
	# Use the respective properties to remember the original locations
	# of the files so that they can be copied back there when NWAM is
	# stopped.
	#
	if service_is_enabled $IPFILTER_FMRI; then
		FIREWALL_POLICY=`get_smf_prop $IPFILTER_FMRI \
		    firewall_config_default/policy`
		if [ "$FIREWALL_POLICY" = "custom" ]; then
			IPF_CONFIG_FILE=`get_smf_prop $IPFILTER_FMRI \
			    firewall_config_default/custom_policy_file`
			copy_to_legacy_loc $IPF_CONFIG_FILE
		else
			# save value as /none, /allow, or /deny
			IPF_CONFIG_FILE="/$FIREWALL_POLICY"
		fi
		IPF6_CONFIG_FILE=`get_smf_prop $IPFILTER_FMRI \
		    config/ipf6_config_file`
		copy_to_legacy_loc $IPF6_CONFIG_FILE

		IPNAT_CONFIG_FILE=`get_smf_prop $IPFILTER_FMRI \
		    config/ipnat_config_file`
		copy_to_legacy_loc $IPNAT_CONFIG_FILE

		IPPOOL_CONFIG_FILE=`get_smf_prop $IPFILTER_FMRI \
		    config/ippool_config_file`
		copy_to_legacy_loc $IPPOOL_CONFIG_FILE
	fi

	# IKE
	if service_is_enabled $IPSEC_IKE_FMRI:default; then
		IKE_CONFIG_FILE=`get_smf_prop $IPSEC_IKE_FMRI config/config_file`
		copy_to_legacy_loc $IKE_CONFIG_FILE
	fi

	# IPsec
	if service_is_enabled $IPSEC_POLICY_FMRI:default; then
		IPSEC_POLICY_CONFIG_FILE=`get_smf_prop $IPSEC_POLICY_FMRI \
		    config/config_file`
		copy_to_legacy_loc $IPSEC_POLICY_CONFIG_FILE
	fi

	if [ -n "$IPF_CONFIG_FILE" -a \( "$IPF_CONFIG_FILE" = "/allow" \
	    -o "$IPF_CONFIG_FILE" = "/deny" -o "$IPF_CONFIG_FILE" = "/none" \
	    -o -f "$IPF_CONFIG_FILE" \) ]; then
		write_loc_prop "ipfilter-config-file" $IPF_CONFIG_FILE \
		    $CREATE_LOC_LEGACY_FILE
	fi
	if [ -n "$IPF6_CONFIG_FILE" -a -f "$IPF6_CONFIG_FILE" ]; then
		write_loc_prop "ipfilter-v6-config-file" $IPF6_CONFIG_FILE \
		    $CREATE_LOC_LEGACY_FILE
	fi
	if [ -n "$IPNAT_CONFIG_FILE" -a -f "$IPNAT_CONFIG_FILE" ]; then
		write_loc_prop "ipnat-config-file" $IPNAT_CONFIG_FILE \
		    $CREATE_LOC_LEGACY_FILE
	fi   
	if [ -n "$IPPOOL_CONFIG_FILE" -a -f "$IPPOOL_CONFIG_FILE" ]; then
		write_loc_prop "ippool-config-file" $IPPOOL_CONFIG_FILE \
		    $CREATE_LOC_LEGACY_FILE
	fi
	if [ -n "$IKE_CONFIG_FILE" -a -f "$IKE_CONFIG_FILE" ]; then
		write_loc_prop "ike-config-file" $IKE_CONFIG_FILE \
		    $CREATE_LOC_LEGACY_FILE
	fi
	if [ -n "$IPSEC_POLICY_CONFIG_FILE" -a -f "$IPSEC_POLICY_CONFIG_FILE" ]
	then
		write_loc_prop "ipsecpolicy-config-file" \
		    $IPSEC_POLICY_CONFIG_FILE $CREATE_LOC_LEGACY_FILE
	fi

	# End
	echo "end" >> $CREATE_LOC_LEGACY_FILE
	# network/location will create the Legacy location with these commands.
}

#
# Undoes the effects of the Legacy location creation
#
revert_to_legacy_loc () {
	$SVCADM disable dns/client
	$SVCADM disable nis/client
	$SVCADM disable ldap/client

	# copy nsswitch.conf to /etc/nsswitch.conf
	copy_from_legacy_loc /etc/nsswitch.conf

	# DNS - copy resolv.conf to /etc/resolv.conf
	if [ -f "$PERM_LEGACY_PATH/resolv.conf" ]; then
		copy_from_legacy_loc /etc/resolv.conf
	        $SVCADM enable dns/client
	fi

	# set /etc/defaultdomain and domainname(8)
	DEFAULT_DOMAIN=`nwam_get_loc_prop Legacy default-domain`
	if [ -n "$DEFAULT_DOMAIN" ]; then
		$DOMAINNAME $DEFAULT_DOMAIN
		$DOMAINNAME > /etc/defaultdomain
	fi

	# NIS - directory and ypserver in /var/yp/binding/
	NIS_CONFIGSRC=`nwam_get_loc_prop Legacy nis-nameservice-configsrc`
	NIS_SERVERS=`nwam_get_loc_prop Legacy nis-nameservice-servers`
	if [ -n "$NIS_CONFIGSRC" ]; then
		if [ ! -d "$NIS_BIND_PATH/$DEFAULT_DOMAIN" ]; then
			$MKDIR -p $NIS_BIND_PATH/$DEFAULT_DOMAIN
		fi
		if [ -n "$NIS_SERVERS" ]; then
			echo "$NIS_SERVERS" | $NAWK \
			    'FS="," { for (i = 1; i <= NF; i++) print $i }' \
			    > $NIS_BIND_PATH/$DEFAULT_DOMAIN/ypservers
		fi
		$SVCADM enable nis/client
	fi

	# LDAP - copy ldap_client_file to /var/ldap/ldap_client_file
	if [ -f "$PERM_LEGACY_PATH/ldap_client_file" ]; then
		copy_from_legacy_loc /var/ldap/ldap_client_file
		$SVCADM enable ldap/client
	fi

	# Copy back nfs NFSMAPID_DOMAIN
	NFSMAPID_DOMAIN=`nwam_get_loc_prop Legacy nfsv4-domain`
	if [ -n "$NFSMAPID_DOMAIN" ]; then
		set_smf_prop $NFS_MAPID_FMRI \
		    nfs-props/nfsmapid_domain $NFSMAPID_DOMAIN
		$SVCADM refresh $NFS_MAPID_FMRI
		$SVCADM enable $NFS_MAPID_FMRI
	fi

	# IPFilter, IPsec, and IKE
	ipf_file=`nwam_get_loc_prop Legacy ipfilter-config-file`
	ipf6_file=`nwam_get_loc_prop Legacy ipfilter-v6-config-file`
	ipnat_file=`nwam_get_loc_prop Legacy ipnat-config-file`
	ippool_file=`nwam_get_loc_prop Legacy ippool-config-file`
	ike_file=`nwam_get_loc_prop Legacy ike-config-file`
	pol_file=`nwam_get_loc_prop Legacy ipsecpolicy-config-file`

	if [ -n "$ike_file" ]; then
		copy_from_legacy_loc $ike_file
		set_smf_prop $IPSEC_IKE_FMRI config/config_file $ike_file
		$SVCADM refresh $IPSEC_IKE_FMRI
		$SVCADM enable $IPSEC_IKE_FMRI
	else
		set_smf_prop $IPSEC_IKE_FMRI config/config_file \
		    $IPSEC_IKE_DEFAULT_CONFIG_FILE
		$SVCADM disable $IPSEC_IKE_FMRI
	fi
	if [ -n "$pol_file" ]; then
		copy_from_legacy_loc $pol_file
		set_smf_prop $IPSEC_POLICY_FMRI config/config_file $pol_file
		$SVCADM refresh $IPSEC_POLICY_FMRI
		$SVCADM enable $IPSEC_POLICY_FMRI
	else
		set_smf_prop $IPSEC_POLICY_FMRI config/config_file \
		    $IPSEC_POLICY_DEFAULT_CONFIG_FILE
		$SVCADM disable $IPSEC_POLICY_FMRI
	fi

	refresh_ipf=false
	if [ -n "$ipf_file" ]; then
		# change /none, /allow, and /deny to firewall policy
		if [ "$ipf_file" = "/none" -o "$ipf_file" = "/allow" \
		    -o "$ipf_file" = "/deny" ]; then
			policy=`echo "$ipf_file" | $NAWK 'FS="/" { print $2 }'`
			set_smf_prop $IPFILTER_FMRI \
			    firewall_config_default/policy $policy
			# no need to clear custom_policy_file as it isn't "custom"
		else
			copy_from_legacy_loc $ipf_file
			set_smf_prop $IPFILTER_FMRI \
			    firewall_config_default/policy "custom"
			set_smf_prop $IPFILTER_FMRI \
			    firewall_config_default/custom_policy_file $ipf_file
		fi
		refresh_ipf=true
	fi
	if [ -n "$ipf6_file" ]; then
		copy_from_legacy_loc $ipf6_file
		set_smf_prop $IPFILTER_FMRI config/ipf6_config_file $ipf6_file
		refresh_ipf=true
	else
		set_smf_prop $IPFILTER_FMRI config/ipf6_config_file \
		    $IPF6_DEFAULT_CONFIG_FILE
	fi
	if [ -n "$ipnat_file" ]; then
		copy_from_legacy_loc $ipnat_file
		set_smf_prop $IPFILTER_FMRI config/ipnat_config_file $ipnat_file
		refresh_ipf=true
	else
		set_smf_prop $IPFILTER_FMRI config/ipnat_config_file \
		    $IPNAT_DEFAULT_CONFIG_FILE
	fi
	if [ -n "$ippool_file" ]; then
		copy_from_legacy_loc $ippool_file
		set_smf_prop $IPFILTER_FMRI config/ippool_config_file \
		    $ippool_file
		refresh_ipf=true
	else
		set_smf_prop $IPFILTER_FMRI config/ippool_config_file \
		    $IPPOOL_DEFAULT_CONFIG_FILE
	fi

	$SVCADM refresh $IPFILTER_FMRI
	if [ "$refresh_ipf" = "true" ]; then
		$SVCADM enable $IPFILTER_FMRI
	else
		$SVCADM disable $IPFILTER_FMRI
	fi

	# Remove the Legacy directories, script and location
	$RM -rf $VOL_LEGACY_PATH
	$RM -rf $PERM_LEGACY_PATH
	$RM -f $VOL_NWAM_PATH/create_loc_legacy
	$NWAMCFG destroy loc Legacy
}

#
# Script entry point
#
# Arguments to net-nwam are
#       method ( start | refresh | stop | -u | -c )
#

#
# Create nwam directory in /etc/svc/volatile
#
if [ ! -d $VOL_NWAM_PATH ]; then
	$MKDIR -m 0755 $VOL_NWAM_PATH
fi

case "$1" in
'refresh')
	/usr/bin/pkill -HUP -z `smf_zonename` nwamd
	#
	# Enable network/location.  Needed on first boot post-install as
	# network/location will not exist until after manifest-import runs.
	#
	if service_exists $NET_LOC_FMRI ; then
		$SVCADM enable -t $NET_LOC_FMRI
	fi
	;;

'start')
	# The real daemon is not started in a shared stack zone. But we need to
	# create a dummy background process to preserve contract lifetime.
	smf_configure_ip
	if [ $? = "1" ] ; then 
		$RM -f $VOL_NWAM_PATH/nwam_blocked
		$MKFIFO $VOL_NWAM_PATH/nwam_blocked
		($CAT <$VOL_NWAM_PATH/nwam_blocked >/dev/null) &
		exit $SMF_EXIT_OK
	fi

	#
	# Enable network/location.
	#
	if service_exists $NET_LOC_FMRI ; then
		$SVCADM enable -t $NET_LOC_FMRI
	fi

	if smf_is_globalzone; then
		net_reconfigure || exit $SMF_EXIT_ERR_CONFIG

		# Update PVID on interfaces configured with VLAN 1
		update_pvid

		#
		# Upgrade handling. The upgrade file consists of a series
		# of dladm(8) commands. Note that after we are done, we
		# cannot rename the upgrade script file as the file system
		# is still read-only at this point. Defer this to the
		# manifest-import service.
		#
		upgrade_script=/var/svc/profile/upgrade_datalink
		if [ -f "${upgrade_script}" ]; then
			. "${upgrade_script}"
		fi

		#
		# Upgrade handling for ibd:
		# After we are done with the upgrade handling, we can not set
		# the ibd/ibd_upgraded property to "true" as the file system is
		# read-only at this point. It will be done later by
		# ibd-post-upgrade service.
		#
		if [ -x /sbin/ibd_upgrade ]; then
			ibd_upgraded=`/bin/svcprop -c -p ibd/ibd_upgraded \
			    svc:/network/physical:default 2> /dev/null`
			if [ "$ibd_upgraded" != "true" ]; then
				/sbin/ibd_upgrade -v
			fi
		fi

		# Bring up simnet instances
		/sbin/dladm up-simnet
		# Initialize security objects.
		/sbin/dladm init-secobj

		#
		# Initialize VNICs, VLANs and flows.  Though they are brought
		# up here, NWAM will not automatically manage VNICs and VLANs.
		#
		/sbin/dladm up-vnic
		/sbin/dladm up-vlan
		/sbin/dladm up-part
		/sbin/dladm up-aggr
		/sbin/flowadm init-flow
	fi

	#
	# We also need to create the Legacy location, which is used
	# to restore non-NWAM settings that are overwritten when
	# NWAM is enabled (e.g. resolv.conf, nsswitch.conf, etc.).
	#
	$NWAMCFG list loc Legacy >/dev/null 2>&1
	if [ $? -eq 1 ]; then
		create_legacy_loc
	fi

	# start nwamd in foreground; it will daemonize itself
	if /lib/inet/nwamd ; then
		exit $SMF_EXIT_OK
	else
		exit $SMF_EXIT_ERR_FATAL
	fi
	;;

'stop')
	# We need to make the dummy process we created above stop.
	smf_configure_ip
	if [ $? = "1" ] ; then 
		echo "stop" > $VOL_NWAM_PATH/nwam_blocked
		exit $SMF_EXIT_OK
	fi

	/usr/bin/pkill -z `smf_zonename` nwamd

	#
	# Restore the non-NWAM settings.
	#
	$NWAMCFG list loc Legacy >/dev/null 2>&1
	if [ $? -eq 1 ]; then
		echo "No Legacy location to revert to!"
		exit $SMF_EXIT_OK
	fi
	revert_to_legacy_loc
	# remove the location property group 
	$SVCCFG -s $NET_LOC_FMRI delpg location
	;;

'-u')
	# After we run this part of the script upon the next reboot
	# network/physical:default will be enabled and
	# network/physical:nwam will be disabled.
	# There are various other parts of the system (nscd, nfs) that
	# depend on continuing to have a working network.  For this
	# reason we don't change the network configuration immediately.	
	#
	# Disable network/physical temporarily and make sure that will
	# be enabled on reboot.
	$SVCADM disable -st $NET_PHYS_FMRI
	$SVCCFG -s $NET_PHYS_FMRI setprop general/enabled=true

	# If nwam is online then make sure that it's temporarily enabled.
	nwam_online=`$SVCPROP -t -p restarter/state $NET_NWAM_FMRI`	
	if [ $? -eq 0 ]; then
		set -- $nwam_online
		[ $3 = "online" ] && $SVCADM enable -st $NET_NWAM_FMRI
	fi

	# Set nwam so that it won't be enabled upon reboot.
	$SVCCFG -s $NET_NWAM_FMRI setprop general/enabled=false
	exit 0
	;;

'-c')
	# Nothing to do for sysidtool
	exit 0
	;;

*)
	echo "Usage: $0 { start | stop | refresh }"
	exit $SMF_EXIT_ERR_FATAL
	;;
esac
exit $SMF_EXIT_OK