#!/sbin/sh # # CDDL HEADER START # # The contents of this file are subject to the terms of the # Common Development and Distribution License (the "License"). # You may not use this file except in compliance with the License. # # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE # or http://www.opensolaris.org/os/licensing. # See the License for the specific language governing permissions # and limitations under the License. # # When distributing Covered Code, include this CDDL HEADER in each # file and include the License file at usr/src/OPENSOLARIS.LICENSE. # If applicable, add the following below this CDDL HEADER, with the # fields enclosed by brackets "[]" replaced with your own identifying # information: Portions Copyright [yyyy] [name of copyright owner] # # CDDL HEADER END # # # Copyright 2009 Sun Microsystems, Inc. All rights reserved. # Use is subject to license terms. # . /lib/svc/share/fs_include.sh . /lib/svc/share/net_include.sh # Make sure that the essential libraries can be found. LD_LIBRARY_PATH=/lib; export LD_LIBRARY_PATH STMSBOOTUTIL=/lib/mpxio/stmsboot_util SAVEDIR=/etc/mpxio BOOTDEVICES=$SAVEDIR/boot-devices RECOVERFILE=$SAVEDIR/recover_instructions DEVFSADM=/usr/sbin/devfsadm DUMPADM=/usr/sbin/dumpadm METADEVADM=/usr/sbin/metadevadm ISROOTDEV="" usrmounted=0 MACH=`/usr/bin/uname -p` ECHO=/usr/bin/echo CAT=/usr/bin/cat CP=/usr/bin/cp DF=/usr/bin/df LS=/usr/bin/ls RM=/usr/bin/rm EGREP=/usr/bin/egrep SED=/usr/bin/sed ZPOOL=/usr/sbin/zpool AWK=/usr/bin/awk MOUNT=/sbin/mount UMOUNT=/sbin/mount EEPROM=/usr/sbin/eeprom BOOTADM=/usr/sbin/bootadm SVCADM=/usr/sbin/svcadm mpxio_error() { cecho "\nERROR: stmsboot: $1" # # display recovery instructions - the first call logs to the service # log and the second call displays on the console. # shcat $RECOVERFILE shcat $RECOVERFILE >/dev/msglog 2>&1 cecho "These instructions were also logged to the file $RECOVERFILE\n" } # # root ("/") is already mounted read only by the kernel. # Remount the root read-write. # mpxio_mount_root() { HASZFSROOT=`$DF -g / |grep zfs` RVAL="" # In single-user maintenance mode, we don't have a writable # root partition, so we _cannot_ use devlinks. Therefore we # have to do some dancing - first mount the physical path # read-write, then re-run $STMSBOOTUTIL to get the real # devlink mapping, and then re-mount the root slice. Of course, # if we all used ZFS this wouldn't be such a pain! exec < $vfstab; readvfstab / # ZFS root environments should _not_ have an entry for / # in their /etc/vfstab. if [ -n "$special" ]; then # sanity check for ZFSRoot _and_ / in /etc/vfstab if [ -n "$HASZFSROOT" ]; then # ERROR - this would cause a failure later # so let root know about it now and provide # a chance to handle it before filesystem/usr cecho "stmsboot: System has ZFS Root *and* an entry for / in /etc/vfstab\nstmsboot: Please remove the / entry from /etc/vfstab and then run\n# svcadm clear mpxio-upgrade" exit 1 fi ISPHYS=`echo $special |$AWK '/^\/dev\/dsk/ {print}'`; if [ -z "$ISPHYS" ]; then # a metadevice, either /dev/md or /dev/vx new_special=$special $MOUNT -o remount,rw $new_special / >/dev/msglog 2>&1 else new_special=`$STMSBOOTUTIL -m $special` if [ "x$new_special" = "xNOT_MAPPED" ]; then # this is a bad state to be in, exit cecho "Error: Your root device is not mapped." exit 1 fi checkopt "llock" $mntopts mntopts='remount' [ -n "$otherops" ] && mntopts="${mntopts},${otherops}" RVAL=`$MOUNT -m -F $fstype -o $mntopts $new_special \ $mountp >/dev/msglog 2>&1` # if we've got active-active paths to our rootvp and # the first path returned by $STMSBOOTUTIL is not the # same as the one we booted from, then we need some # handwaving due to restrictions in the ufs module # (see the remountfs() function in # $SRC/uts/common/fs/ufs/ufs_vfsops.c) if [ $? -eq 0 ]; then # now re-run $STMSBOOTUTIL to get the real # mapping for this device new_special=`$STMSBOOTUTIL -m $special` # mount root for real $MOUNT -o remount,rw $new_special / \ >/dev/msglog 2>&1 else SLICE=`$ECHO $special | $AWK -F"s" '{print $3}'` for device in `$CAT $BOOTDEVICES`; do new_special="${device}s${SLICE}" $MOUNT -m -F $fstype -o $mntopts \ $new_special $mountp >/dev/msglog 2>&1 if [ $? -eq 0 ]; then # success, break out ISROOTDEV=`$ECHO $new_special | $SED -e "s,/dev/dsk/,,"` break; fi done if [ -n "$RVAL" ]; then cecho "Error: Unable to remount your root device" exit 1; fi fi fi else if [ -z "$HASZFSROOT" ]; then cecho "stmsboot: Error: your root slice is invalid" exit 1 else cecho "stmsboot: Root is on ZFS" fi fi } # # mount /usr read only # mpxio_mount_usr() { exec < $vfstab; readvfstab "/usr" ret_val=0 if [ -n "$mountp" ]; then new_special=`$STMSBOOTUTIL -m $special` if [ "$fstype" = cachefs ]; then # Mount read-only without the cache. case "$mntopts" in *backfstype=nfs*) cfsbacktype=nfs ;; *backfstype=hsfs*) cfsbacktype=hsfs ;; *) cecho 'stmsboot: invalid vfstab entry for /usr' cfsbacktype=nfs ;; esac # see the comment below for /dev/null $MOUNT -m -F $cfsbacktype -o ro $new_special $mountp \ >/dev/null 2>&1 ret_val=$? else # # Must use -o largefiles here to ensure the read-only # mount does not fail as a result of having a large # file present on /usr. # if [ "x$mntopts" = x- ]; then mntopts='ro,largefiles' else checkopt largefiles $mntopts if [ "x$option" != xlargefiles ]; then mntopts="largefiles,$mntopts" fi checkopt ro $mntopts if [ "x$option" != xro ]; then mntopts="ro,$mntopts" fi # Requesting logging on a read-only mount # causes errors to be displayed, so remove # "logging" from the list of options. checkopt logging $mntopts if [ "x$option" = xlogging ]; then mntopts="$otherops" fi fi # In case of a manual restart of the service, mount # will emit messages if /usr is already mounted. # So redirect the output to /dev/null. $MOUNT -m -F $fstype -o $mntopts $new_special /usr \ >/dev/null 2>&1 ret_val=$? fi if [ $ret_val -eq 0 ]; then usrmounted=1 fi fi return $ret_val } # update system dump configuration update_dumpconf() { # Disable device-in-use checking (done in libdiskmgt). # Without disabling this check, the configuration of dump device # would fail as the device-in-use code incorrectly concludes that # the device is in use and hence prevents configuration of the dump # device. NOINUSE_CHECK=1 export NOINUSE_CHECK DUMPISZFS=`$AWK -F"=" '/DUMPADM_DEVICE/ {print $2}' /etc/dumpadm.conf|$EGREP zvol` if [ "x$DUMPISZFS" = "x" ]; then set -- `$DUMPADM -u 2>&1 | $EGREP 'cannot use /dev.* as dump device'` if [ "x$4" != x ]; then newname=`$STMSBOOTUTIL -m $4` if [ $? -eq 0 ]; then if $DUMPADM -d $newname > /dev/msglog 2> /dev/console; then cecho "stmsboot: dump configuration \ has been updated." else mpxio_error "failed to configure \ the dump device.\nold \ dump device name: $4" return 1 fi fi fi else # make sure we can get to it, force zfs to load fully $LS $DUMPISZFS >>/dev/null 2>&1 cecho "stmsboot: dump on ZFS, no dumpadm update required" fi return 0 } # Update bootpath for x86 here when we are enabling mpxio on root update_bootpath() { cur_bootpath=`$STMSBOOTUTIL -b` if [ $? != 0 ]; then cecho "stmsboot: ERROR! Unable to retrieve bootpath property\n" exit 1 fi NEWBOOTPATH="" for path in $cur_bootpath; do mapped=`$STMSBOOTUTIL -p $path` if [ "$mapped" != "NOT_MAPPED" ]; then if [ "x$mapped" != "x$path" ]; then NEWBOOTPATH=`echo "$path " | \ $SED -e"s|$path|$mapped|"`" $NEWBOOTPATH" else NEWBOOTPATH="$NEWBOOTPATH $path" fi fi done # now strip off leading and trailing space chars new_bootpath=`echo $NEWBOOTPATH` $EEPROM bootpath="$new_bootpath" cecho "stmsboot: bootpath has been updated" cecho "" } # Now do the actual work mpxio_main() { # NOTE: If the first attempt to run the service has failed due to an # expected error, users should be able to manually rerun the service. # # First mount /usr read only. This must be done to run # utilities such as fsck and devfsadm. # In the case of a manual rerun of the service, mounting of /usr here # fails if /usr already happens to be mounted. It is better that we # do not mount /usr if already mounted, but there seems to be no # apparent way to check whether /usr is mounted or not as we mount # /usr without making an entry into /etc/mnttab. So instead of # explicitly checking for mount failures, we just do a sanity check # by looking for some file (in this case devfsadm) in /usr. # mpxio_mount_usr if [ ! -s $DEVFSADM ]; then mpxio_error "failed to mount the /usr filesystem." return fi if mpxio_mount_root; then # create /dev links cecho "stmsboot: configuring devices" $DEVFSADM # update /etc/vfstab to reflect device name changes $STMSBOOTUTIL -u >/dev/msglog 2>&1 if [ $? -eq 0 ]; then $CP /etc/vfstab /etc/vfstab.old # handle active-active paths, where the probe order # for the hba reports a different path to what the # boot-device variable gives us if [ -n "$ISROOTDEV" ]; then ROOTDEVCHK=`grep $ISROOTDEV /etc/vfstab` if [ $? != 0 ]; then # we got a different path for root exec < $SAVEDIR/vfstab.new; readvfstab / FILEDEV=`$ECHO $special | \ $SED -e"s,/dev/dsk/,,"` $SED -e"s,$FILEDEV,$ISROOTDEV,g" < \ $SAVEDIR/vfstab.new > /etc/vfstab fi else $CP $SAVEDIR/vfstab.new /etc/vfstab fi $RM $SAVEDIR/vfstab.new cecho "" cecho "stmsboot: vfstab has been updated" if update_dumpconf; then # update svm configuration to reflect new names if [ -s /kernel/drv/md.conf ] && \ [ -x $METADEVADM ]; then $METADEVADM -r >/dev/msglog 2>&1 fi fi if [ "x$MACH" = "xi386" ]; then # only update bootpath here for x86 update_bootpath fi cecho "stmsboot: now regenerating boot archive" $BOOTADM update-archive else mpxio_error "failed to update /etc/vfstab." fi $SVCADM disable system/device/mpxio-upgrade else mpxio_error "failed to mount the root filesystem." if [ $usrmounted -eq 1 ]; then $UMOUNT /usr fi fi } mpxio_main