/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2008 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "%Z%%M% %I% %E% SMI" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "smbd.h" #define DRV_DEVICE_PATH "/devices/pseudo/smbsrv@0:smbsrv" #define SMB_VARRUN_DIR "/var/run/smb" #define SMB_CCACHE SMB_VARRUN_DIR "/ccache" #define SMB_DBDIR "/var/smb" extern void smb_netbios_name_reconfig(); extern void smb_browser_config(); static int smbd_daemonize_init(void); static void smbd_daemonize_fini(int, int); static int smbd_kernel_bind(void); static void smbd_kernel_unbind(void); static int smbd_already_running(void); static void smbd_remove_ccache(void); static int smbd_service_init(void); static void smbd_service_fini(void); static int smbd_setup_options(int argc, char *argv[]); static void smbd_usage(FILE *fp); static void smbd_report(const char *fmt, ...); static void smbd_sig_handler(int sig); static int smbd_localtime_init(void); static void *smbd_localtime_monitor(void *arg); extern time_t altzone; static pthread_t localtime_thr; static int smbd_refresh_init(void); static void smbd_refresh_fini(void); static void *smbd_refresh_monitor(void *); static pthread_t refresh_thr; static pthread_cond_t refresh_cond; static pthread_mutex_t refresh_mutex; static smbd_t smbd; /* * smbd user land daemon * * Use SMF error codes only on return or exit. */ int main(int argc, char *argv[]) { struct sigaction act; sigset_t set; uid_t uid; int pfd = -1; smbd.s_pname = basename(argv[0]); openlog(smbd.s_pname, LOG_PID | LOG_NOWAIT, LOG_DAEMON); if (smbd_setup_options(argc, argv) != 0) return (SMF_EXIT_ERR_FATAL); if ((uid = getuid()) != smbd.s_uid) { smbd_report("user %d: %s", uid, strerror(EPERM)); return (SMF_EXIT_ERR_FATAL); } if (getzoneid() != GLOBAL_ZONEID) { smbd_report("non-global zones are not supported"); return (SMF_EXIT_ERR_FATAL); } if (is_system_labeled()) { smbd_report("Trusted Extensions not supported"); return (SMF_EXIT_ERR_FATAL); } if (smbd_already_running()) return (SMF_EXIT_OK); (void) sigfillset(&set); (void) sigdelset(&set, SIGABRT); (void) sigfillset(&act.sa_mask); act.sa_handler = smbd_sig_handler; act.sa_flags = 0; (void) sigaction(SIGTERM, &act, NULL); (void) sigaction(SIGHUP, &act, NULL); (void) sigaction(SIGINT, &act, NULL); (void) sigaction(SIGPIPE, &act, NULL); (void) sigdelset(&set, SIGTERM); (void) sigdelset(&set, SIGHUP); (void) sigdelset(&set, SIGINT); (void) sigdelset(&set, SIGPIPE); if (smbd.s_fg) { (void) sigdelset(&set, SIGTSTP); (void) sigdelset(&set, SIGTTIN); (void) sigdelset(&set, SIGTTOU); if (smbd_service_init() != 0) { smbd_report("service initialization failed"); exit(SMF_EXIT_ERR_FATAL); } } else { /* * "pfd" is a pipe descriptor -- any fatal errors * during subsequent initialization of the child * process should be written to this pipe and the * parent will report this error as the exit status. */ pfd = smbd_daemonize_init(); if (smbd_service_init() != 0) { smbd_report("daemon initialization failed"); exit(SMF_EXIT_ERR_FATAL); } smbd_daemonize_fini(pfd, SMF_EXIT_OK); } (void) atexit(smbd_service_fini); while (!smbd.s_shutdown_flag) { (void) sigsuspend(&set); switch (smbd.s_sigval) { case 0: break; case SIGPIPE: break; case SIGHUP: /* Refresh config was triggered */ if (smbd.s_fg) smbd_report("reconfiguration requested"); (void) pthread_cond_signal(&refresh_cond); break; default: /* * Typically SIGINT or SIGTERM. */ smbd.s_shutdown_flag = 1; break; } smbd.s_sigval = 0; } smbd_service_fini(); closelog(); return (SMF_EXIT_OK); } /* * This function will fork off a child process, * from which only the child will return. * * Use SMF error codes only on exit. */ static int smbd_daemonize_init(void) { int status, pfds[2]; sigset_t set, oset; pid_t pid; int rc; /* * Reset privileges to the minimum set required. We continue * to run as root to create and access files in /var. */ rc = __init_daemon_priv(PU_RESETGROUPS | PU_LIMITPRIVS, smbd.s_uid, smbd.s_gid, PRIV_NET_MAC_AWARE, PRIV_NET_PRIVADDR, PRIV_PROC_AUDIT, PRIV_SYS_DEVICES, PRIV_SYS_SMB, NULL); if (rc != 0) { smbd_report("insufficient privileges"); exit(SMF_EXIT_ERR_FATAL); } /* * Block all signals prior to the fork and leave them blocked in the * parent so we don't get in a situation where the parent gets SIGINT * and returns non-zero exit status and the child is actually running. * In the child, restore the signal mask once we've done our setsid(). */ (void) sigfillset(&set); (void) sigdelset(&set, SIGABRT); (void) sigprocmask(SIG_BLOCK, &set, &oset); if (pipe(pfds) == -1) { smbd_report("unable to create pipe"); exit(SMF_EXIT_ERR_FATAL); } closelog(); if ((pid = fork()) == -1) { openlog(smbd.s_pname, LOG_PID | LOG_NOWAIT, LOG_DAEMON); smbd_report("unable to fork"); closelog(); exit(SMF_EXIT_ERR_FATAL); } /* * If we're the parent process, wait for either the child to send us * the appropriate exit status over the pipe or for the read to fail * (presumably with 0 for EOF if our child terminated abnormally). * If the read fails, exit with either the child's exit status if it * exited or with SMF_EXIT_ERR_FATAL if it died from a fatal signal. */ if (pid != 0) { (void) close(pfds[1]); if (read(pfds[0], &status, sizeof (status)) == sizeof (status)) _exit(status); if (waitpid(pid, &status, 0) == pid && WIFEXITED(status)) _exit(WEXITSTATUS(status)); _exit(SMF_EXIT_ERR_FATAL); } openlog(smbd.s_pname, LOG_PID | LOG_NOWAIT, LOG_DAEMON); smbd.s_pid = getpid(); (void) setsid(); (void) sigprocmask(SIG_SETMASK, &oset, NULL); (void) chdir("/"); (void) umask(022); (void) close(pfds[0]); return (pfds[1]); } static void smbd_daemonize_fini(int fd, int exit_status) { /* * Now that we're running, if a pipe fd was specified, write an exit * status to it to indicate that our parent process can safely detach. * Then proceed to loading the remaining non-built-in modules. */ if (fd >= 0) (void) write(fd, &exit_status, sizeof (exit_status)); (void) close(fd); if ((fd = open("/dev/null", O_RDWR)) >= 0) { (void) fcntl(fd, F_DUP2FD, STDIN_FILENO); (void) fcntl(fd, F_DUP2FD, STDOUT_FILENO); (void) fcntl(fd, F_DUP2FD, STDERR_FILENO); (void) close(fd); } __fini_daemon_priv(PRIV_PROC_FORK, PRIV_PROC_EXEC, PRIV_PROC_SESSION, PRIV_FILE_LINK_ANY, PRIV_PROC_INFO, NULL); } static int smbd_service_init(void) { static char *dir[] = { SMB_DBDIR, /* smbpasswd */ SMB_VARRUN_DIR /* KRB credential cache */ }; int door_id; int rc; uint32_t mode; char resource_domain[SMB_PI_MAX_DOMAIN]; int i; smbd.s_drv_fd = -1; for (i = 0; i < (sizeof (dir)/sizeof (dir[0])); ++i) { errno = 0; if ((mkdir(dir[i], 0700) < 0) && (errno != EEXIST)) { smbd_report("mkdir %s: %s", dir[i], strerror(errno)); return (1); } } /* * Set KRB5CCNAME (for the SMB credential cache) in the environment. */ if (putenv("KRB5CCNAME=" SMB_CCACHE) != 0) { smbd_report("unable to set KRB5CCNAME"); return (1); } (void) oem_language_set("english"); if (!nt_builtin_init()) { smbd_report("out of memory"); return (1); } (void) smb_nicmon_start(); if (dns_msgid_init() != 0) { smbd_report("DNS message id initialization failed"); return (1); } smbrdr_init(); if (smb_netbios_start() != 0) smbd_report("NetBIOS services failed to start"); else smbd_report("NetBIOS services started"); if (smb_netlogon_init() != 0) { smbd_report("netlogon initialization failed"); return (1); } (void) smb_getdomainname(resource_domain, SMB_PI_MAX_DOMAIN); (void) utf8_strupr(resource_domain); mode = smb_config_get_secmode(); if (mode == SMB_SECMODE_DOMAIN) (void) locate_resource_pdc(resource_domain); /* Get the ID map client handle */ if ((rc = smb_idmap_start()) != 0) { smbd_report("no idmap handle"); return (rc); } if ((rc = nt_domain_init(resource_domain, mode)) != 0) { if (rc == SMB_DOMAIN_NOMACHINE_SID) { smbd_report( "no machine SID: check idmap configuration"); return (rc); } } ads_init(); if ((rc = mlsvc_init()) != 0) { smbd_report("msrpc initialization failed"); return (rc); } if (smb_lmshrd_srv_start() != 0) { smbd_report("share initialization failed"); } /* XXX following will get removed */ (void) smb_doorsrv_start(); if ((rc = smb_door_srv_start()) != 0) return (rc); if ((rc = smbd_refresh_init()) != 0) return (rc); /* Call dyndns update - Just in case its configured to refresh DNS */ if (smb_config_getbool(SMB_CI_DYNDNS_ENABLE)) (void) dyndns_update(); if ((rc = smbd_kernel_bind()) != 0) smbd_report("kernel bind error: %s", strerror(errno)); (void) smbd_localtime_init(); if ((door_id = smb_winpipe_doorsvc_start()) == -1) { smbd_report("winpipe initialization failed %s", strerror(errno)); return (rc); } else { if (ioctl(smbd.s_drv_fd, SMB_IOC_WINPIPE, &door_id) < 0) smbd_report("winpipe ioctl: %s", strerror(errno)); } (void) smb_lgrp_start(); return (lmshare_start()); } static void smbd_remove_ccache(void) { if ((remove(SMB_CCACHE) < 0) && (errno != ENOENT)) smbd_report("failed to remove SMB ccache"); } /* * Close the kernel service and shutdown smbd services. * This function is registered with atexit(): ensure that anything * called from here is safe to be called multiple times. */ static void smbd_service_fini(void) { smb_winpipe_doorsvc_stop(); nt_builtin_fini(); smbd_refresh_fini(); smbd_kernel_unbind(); smb_door_srv_stop(); smb_doorsrv_stop(); smb_lmshrd_srv_stop(); lmshare_stop(); smb_nicmon_stop(); smb_idmap_stop(); smb_lgrp_stop(); smbd_remove_ccache(); } /* * smbd_refresh_init() * * SMB service refresh thread initialization. This thread waits for a * refresh event and updates the daemon's view of the configuration * before going back to sleep. */ static int smbd_refresh_init() { pthread_attr_t tattr; pthread_condattr_t cattr; int rc; (void) pthread_condattr_init(&cattr); (void) pthread_cond_init(&refresh_cond, &cattr); (void) pthread_condattr_destroy(&cattr); (void) pthread_mutex_init(&refresh_mutex, NULL); (void) pthread_attr_init(&tattr); (void) pthread_attr_setdetachstate(&tattr, PTHREAD_CREATE_DETACHED); rc = pthread_create(&refresh_thr, &tattr, smbd_refresh_monitor, 0); (void) pthread_attr_destroy(&tattr); return (rc); } /* * smbd_refresh_fini() * * Stop the refresh thread. */ static void smbd_refresh_fini() { (void) pthread_cancel(refresh_thr); (void) pthread_cond_destroy(&refresh_cond); (void) pthread_mutex_destroy(&refresh_mutex); } /* * smbd_refresh_monitor() * * Wait for a refresh event. When this thread wakes up, update the * smbd configuration from the SMF config information then go back to * wait for the next refresh. */ /*ARGSUSED*/ static void * smbd_refresh_monitor(void *arg) { int dummy = 0; (void) pthread_mutex_lock(&refresh_mutex); while (pthread_cond_wait(&refresh_cond, &refresh_mutex) == 0) { /* * We've been woken up by a refresh event so go do * what is necessary. */ ads_refresh(); smb_nic_build_info(); (void) smb_netbios_name_reconfig(); (void) smb_browser_config(); smbd_remove_ccache(); if (ioctl(smbd.s_drv_fd, SMB_IOC_CONFIG, &dummy) < 0) { smbd_report("configuration update ioctl: %s", strerror(errno)); } } return (NULL); } /* * If the door has already been opened by another process (non-zero pid * in target), we assume that another smbd is already running. If there * is a race here, it will be caught later when smbsrv is opened because * only one process is allowed to open the device at a time. */ static int smbd_already_running(void) { door_info_t info; int door; if ((door = open(SMBD_DOOR_NAME, O_RDONLY)) < 0) return (0); if (door_info(door, &info) < 0) return (0); if (info.di_target > 0) { smbd_report("already running: pid %ld\n", info.di_target); (void) close(door); return (1); } (void) close(door); return (0); } static int smbd_kernel_bind(void) { if (smbd.s_drv_fd != -1) (void) close(smbd.s_drv_fd); if ((smbd.s_drv_fd = open(DRV_DEVICE_PATH, 0)) < 0) { smbd.s_drv_fd = -1; return (1); } return (0); } /* * Initialization of the localtime thread. * Returns 0 on success, an error number if thread creation fails. */ int smbd_localtime_init(void) { pthread_attr_t tattr; int rc; (void) pthread_attr_init(&tattr); (void) pthread_attr_setdetachstate(&tattr, PTHREAD_CREATE_DETACHED); rc = pthread_create(&localtime_thr, &tattr, smbd_localtime_monitor, 0); (void) pthread_attr_destroy(&tattr); return (rc); } /* * Local time thread to kernel land. * Send local gmtoff to kernel module one time at startup * and each time it changes (up to twice a year). * Local gmtoff is checked once every 15 minutes and * since some timezones are aligned on half and qtr hour boundaries, * once an hour would likely suffice. */ /*ARGSUSED*/ static void * smbd_localtime_monitor(void *arg) { struct tm local_tm; time_t secs, gmtoff; time_t last_gmtoff = -1; int timeout; for (;;) { gmtoff = -altzone; if ((last_gmtoff != gmtoff) && (smbd.s_drv_fd != -1)) { if (ioctl(smbd.s_drv_fd, SMB_IOC_GMTOFF, &gmtoff) < 0) { smbd_report("localtime ioctl: %s", strerror(errno)); } } /* * Align the next iteration on a fifteen minute boundary. */ secs = time(0); (void) localtime_r(&secs, &local_tm); timeout = ((15 - (local_tm.tm_min % 15)) * SECSPERMIN); (void) sleep(timeout); last_gmtoff = gmtoff; } /*NOTREACHED*/ return (NULL); } static void smbd_kernel_unbind(void) { if (smbd.s_drv_fd != -1) { (void) close(smbd.s_drv_fd); smbd.s_drv_fd = -1; } } static void smbd_sig_handler(int sigval) { if (smbd.s_sigval == 0) smbd.s_sigval = sigval; } /* * Set up configuration options and parse the command line. * This function will determine if we will run as a daemon * or in the foreground. * * Failure to find a uid or gid results in using the default (0). */ static int smbd_setup_options(int argc, char *argv[]) { struct passwd *pwd; struct group *grp; int c; if ((pwd = getpwnam("root")) != NULL) smbd.s_uid = pwd->pw_uid; if ((grp = getgrnam("sys")) != NULL) smbd.s_gid = grp->gr_gid; smbd.s_fg = smb_config_get_fg_flag(); while ((c = getopt(argc, argv, ":f")) != -1) { switch (c) { case 'f': smbd.s_fg = 1; break; case ':': case '?': default: smbd_usage(stderr); return (-1); } } return (0); } static void smbd_usage(FILE *fp) { static char *help[] = { "-f run program in foreground" }; int i; (void) fprintf(fp, "Usage: %s [-f]\n", smbd.s_pname); for (i = 0; i < sizeof (help)/sizeof (help[0]); ++i) (void) fprintf(fp, " %s\n", help[i]); } static void smbd_report(const char *fmt, ...) { char buf[128]; va_list ap; if (fmt == NULL) return; va_start(ap, fmt); (void) vsnprintf(buf, 128, fmt, ap); va_end(ap); (void) fprintf(stderr, "smbd: %s\n", buf); } /* * Enable libumem debugging by default on DEBUG builds. */ #ifdef DEBUG const char * _umem_debug_init(void) { return ("default,verbose"); /* $UMEM_DEBUG setting */ } const char * _umem_logging_init(void) { return ("fail,contents"); /* $UMEM_LOGGING setting */ } #endif