/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2009 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #pragma ident "@(#)amd64_elf.c 1.25 08/07/30 SMI" /* * amd64 machine dependent and ELF file class dependent functions. * Contains routines for performing function binding and symbol relocations. */ #include #include #include #include #include #include #include #include #include #include #include "_rtld.h" #include "_audit.h" #include "_elf.h" #include "_inline.h" #include "msg.h" extern void elf_rtbndr(Rt_map *, ulong_t, caddr_t); int elf_mach_flags_check(Rej_desc *rej, Ehdr *ehdr) { /* * Check machine type and flags. */ if (ehdr->e_flags != 0) { rej->rej_type = SGS_REJ_BADFLAG; rej->rej_info = (uint_t)ehdr->e_flags; return (0); } return (1); } void ldso_plt_init(Rt_map *lmp) { /* * There is no need to analyze ld.so because we don't map in any of * its dependencies. However we may map these dependencies in later * (as if ld.so had dlopened them), so initialize the plt and the * permission information. */ if (PLTGOT(lmp)) elf_plt_init((PLTGOT(lmp)), (caddr_t)lmp); } static const uchar_t dyn_plt_template[] = { /* 0x00 */ 0x55, /* pushq %rbp */ /* 0x01 */ 0x48, 0x89, 0xe5, /* movq %rsp, %rbp */ /* 0x04 */ 0x48, 0x83, 0xec, 0x10, /* subq $0x10, %rsp */ /* 0x08 */ 0x4c, 0x8d, 0x1d, 0x00, /* leaq trace_fields(%rip), %r11 */ 0x00, 0x00, 0x00, /* 0x0f */ 0x4c, 0x89, 0x5d, 0xf8, /* movq %r11, -0x8(%rbp) */ /* 0x13 */ 0x49, 0xbb, 0x00, 0x00, /* movq $elf_plt_trace, %r11 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x1d */ 0x41, 0xff, 0xe3 /* jmp *%r11 */ /* 0x20 */ }; /* * And the virutal outstanding relocations against the * above block are: * * reloc offset Addend symbol * R_AMD64_PC32 0x0b -4 trace_fields * R_AMD64_64 0x15 0 elf_plt_trace */ #define TRCREL1OFF 0x0b #define TRCREL2OFF 0x15 int dyn_plt_ent_size = sizeof (dyn_plt_template); /* * the dynamic plt entry is: * * pushq %rbp * movq %rsp, %rbp * subq $0x10, %rsp * leaq trace_fields(%rip), %r11 * movq %r11, -0x8(%rbp) * movq $elf_plt_trace, %r11 * jmp *%r11 * dyn_data: * .align 8 * uintptr_t reflmp * uintptr_t deflmp * uint_t symndx * uint_t sb_flags * Sym symdef */ static caddr_t elf_plt_trace_write(ulong_t roffset, Rt_map *rlmp, Rt_map *dlmp, Sym *sym, uint_t symndx, uint_t pltndx, caddr_t to, uint_t sb_flags, int *fail) { extern int elf_plt_trace(); ulong_t got_entry; uchar_t *dyn_plt; uintptr_t *dyndata; /* * We only need to add the glue code if there is an auditing * library that is interested in this binding. */ dyn_plt = (uchar_t *)((uintptr_t)AUDINFO(rlmp)->ai_dynplts + (pltndx * dyn_plt_ent_size)); /* * Have we initialized this dynamic plt entry yet? If we haven't do it * now. Otherwise this function has been called before, but from a * different plt (ie. from another shared object). In that case * we just set the plt to point to the new dyn_plt. */ if (*dyn_plt == 0) { Sym *symp; Xword symvalue; Lm_list *lml = LIST(rlmp); (void) memcpy((void *)dyn_plt, dyn_plt_template, sizeof (dyn_plt_template)); dyndata = (uintptr_t *)((uintptr_t)dyn_plt + ROUND(sizeof (dyn_plt_template), M_WORD_ALIGN)); /* * relocate: * leaq trace_fields(%rip), %r11 * R_AMD64_PC32 0x0b -4 trace_fields */ symvalue = (Xword)((uintptr_t)dyndata - (uintptr_t)(&dyn_plt[TRCREL1OFF]) - 4); if (do_reloc_rtld(R_AMD64_PC32, &dyn_plt[TRCREL1OFF], &symvalue, MSG_ORIG(MSG_SYM_LADYNDATA), MSG_ORIG(MSG_SPECFIL_DYNPLT), lml) == 0) { *fail = 1; return (0); } /* * relocating: * movq $elf_plt_trace, %r11 * R_AMD64_64 0x15 0 elf_plt_trace */ symvalue = (Xword)elf_plt_trace; if (do_reloc_rtld(R_AMD64_64, &dyn_plt[TRCREL2OFF], &symvalue, MSG_ORIG(MSG_SYM_ELFPLTTRACE), MSG_ORIG(MSG_SPECFIL_DYNPLT), lml) == 0) { *fail = 1; return (0); } *dyndata++ = (uintptr_t)rlmp; *dyndata++ = (uintptr_t)dlmp; *dyndata = (uintptr_t)(((uint64_t)sb_flags << 32) | symndx); dyndata++; symp = (Sym *)dyndata; *symp = *sym; symp->st_value = (Addr)to; } got_entry = (ulong_t)roffset; *(ulong_t *)got_entry = (ulong_t)dyn_plt; return ((caddr_t)dyn_plt); } /* * Function binding routine - invoked on the first call to a function through * the procedure linkage table; * passes first through an assembly language interface. * * Takes the offset into the relocation table of the associated * relocation entry and the address of the link map (rt_private_map struct) * for the entry. * * Returns the address of the function referenced after re-writing the PLT * entry to invoke the function directly. * * On error, causes process to terminate with a signal. */ ulong_t elf_bndr(Rt_map *lmp, ulong_t pltndx, caddr_t from) { Rt_map *nlmp, *llmp; ulong_t addr, reloff, symval, rsymndx; char *name; Rela *rptr; Sym *rsym, *nsym; uint_t binfo, sb_flags = 0, dbg_class; Slookup sl; int entry, lmflags; Lm_list *lml; /* * For compatibility with libthread (TI_VERSION 1) we track the entry * value. A zero value indicates we have recursed into ld.so.1 to * further process a locking request. Under this recursion we disable * tsort and cleanup activities. */ entry = enter(0); lml = LIST(lmp); if ((lmflags = lml->lm_flags) & LML_FLG_RTLDLM) { dbg_class = dbg_desc->d_class; dbg_desc->d_class = 0; } /* * Perform some basic sanity checks. If we didn't get a load map or * the relocation offset is invalid then its possible someone has walked * over the .got entries or jumped to plt0 out of the blue. */ if ((!lmp) && (pltndx <= (ulong_t)PLTRELSZ(lmp) / (ulong_t)RELENT(lmp))) { Conv_inv_buf_t inv_buf; eprintf(lml, ERR_FATAL, MSG_INTL(MSG_REL_PLTREF), conv_reloc_amd64_type(R_AMD64_JUMP_SLOT, 0, &inv_buf), EC_NATPTR(lmp), EC_XWORD(pltndx), EC_NATPTR(from)); rtldexit(lml, 1); } reloff = pltndx * (ulong_t)RELENT(lmp); /* * Use relocation entry to get symbol table entry and symbol name. */ addr = (ulong_t)JMPREL(lmp); rptr = (Rela *)(addr + reloff); rsymndx = ELF_R_SYM(rptr->r_info); rsym = (Sym *)((ulong_t)SYMTAB(lmp) + (rsymndx * SYMENT(lmp))); name = (char *)(STRTAB(lmp) + rsym->st_name); /* * Determine the last link-map of this list, this'll be the starting * point for any tsort() processing. */ llmp = lml->lm_tail; /* * Find definition for symbol. Initialize the symbol lookup data * structure. */ SLOOKUP_INIT(sl, name, lmp, lml->lm_head, ld_entry_cnt, 0, rsymndx, rsym, 0, LKUP_DEFT); if ((nsym = lookup_sym(&sl, &nlmp, &binfo, NULL)) == 0) { eprintf(lml, ERR_FATAL, MSG_INTL(MSG_REL_NOSYM), NAME(lmp), demangle(name)); rtldexit(lml, 1); } symval = nsym->st_value; if (!(FLAGS(nlmp) & FLG_RT_FIXED) && (nsym->st_shndx != SHN_ABS)) symval += ADDR(nlmp); if ((lmp != nlmp) && ((FLAGS1(nlmp) & FL1_RT_NOINIFIN) == 0)) { /* * Record that this new link map is now bound to the caller. */ if (bind_one(lmp, nlmp, BND_REFER) == 0) rtldexit(lml, 1); } if ((lml->lm_tflags | AFLAGS(lmp)) & LML_TFLG_AUD_SYMBIND) { uint_t symndx = (((uintptr_t)nsym - (uintptr_t)SYMTAB(nlmp)) / SYMENT(nlmp)); symval = audit_symbind(lmp, nlmp, nsym, symndx, symval, &sb_flags); } if (!(rtld_flags & RT_FL_NOBIND)) { addr = rptr->r_offset; if (!(FLAGS(lmp) & FLG_RT_FIXED)) addr += ADDR(lmp); if (((lml->lm_tflags | AFLAGS(lmp)) & (LML_TFLG_AUD_PLTENTER | LML_TFLG_AUD_PLTEXIT)) && AUDINFO(lmp)->ai_dynplts) { int fail = 0; uint_t pltndx = reloff / sizeof (Rela); uint_t symndx = (((uintptr_t)nsym - (uintptr_t)SYMTAB(nlmp)) / SYMENT(nlmp)); symval = (ulong_t)elf_plt_trace_write(addr, lmp, nlmp, nsym, symndx, pltndx, (caddr_t)symval, sb_flags, &fail); if (fail) rtldexit(lml, 1); } else { /* * Write standard PLT entry to jump directly * to newly bound function. */ *(ulong_t *)addr = symval; } } /* * Print binding information and rebuild PLT entry. */ DBG_CALL(Dbg_bind_global(lmp, (Addr)from, (Off)(from - ADDR(lmp)), (Xword)(reloff / sizeof (Rela)), PLT_T_FULL, nlmp, (Addr)symval, nsym->st_value, name, binfo)); /* * Complete any processing for newly loaded objects. Note we don't * know exactly where any new objects are loaded (we know the object * that supplied the symbol, but others may have been loaded lazily as * we searched for the symbol), so sorting starts from the last * link-map know on entry to this routine. */ if (entry) load_completion(llmp); /* * Some operations like dldump() or dlopen()'ing a relocatable object * result in objects being loaded on rtld's link-map, make sure these * objects are initialized also. */ if ((LIST(nlmp)->lm_flags & LML_FLG_RTLDLM) && LIST(nlmp)->lm_init) load_completion(nlmp); /* * Make sure the object to which we've bound has had it's .init fired. * Cleanup before return to user code. */ if (entry) { is_dep_init(nlmp, lmp); leave(lml, 0); } if (lmflags & LML_FLG_RTLDLM) dbg_desc->d_class = dbg_class; return (symval); } /* * Read and process the relocations for one link object, we assume all * relocation sections for loadable segments are stored contiguously in * the file. */ int elf_reloc(Rt_map *lmp, uint_t plt, int *in_nfavl, APlist **textrel) { ulong_t relbgn, relend, relsiz, basebgn; ulong_t pltbgn, pltend, _pltbgn, _pltend; ulong_t roffset, rsymndx, psymndx = 0; ulong_t dsymndx; uchar_t rtype; long reladd, value, pvalue; Sym *symref, *psymref, *symdef, *psymdef; char *name, *pname; Rt_map *_lmp, *plmp; int ret = 1, noplt = 0; int relacount = RELACOUNT(lmp), plthint = 0; Rela *rel; uint_t binfo, pbinfo; APlist *bound = NULL; /* * Although only necessary for lazy binding, initialize the first * global offset entry to go to elf_rtbndr(). dbx(1) seems * to find this useful. */ if ((plt == 0) && PLTGOT(lmp)) { mmapobj_result_t *mpp; /* * Make sure the segment is writable. */ if ((((mpp = find_segment((caddr_t)PLTGOT(lmp), lmp)) != NULL) && ((mpp->mr_prot & PROT_WRITE) == 0)) && ((set_prot(lmp, mpp, 1) == 0) || (aplist_append(textrel, mpp, AL_CNT_TEXTREL) == NULL))) return (0); elf_plt_init(PLTGOT(lmp), (caddr_t)lmp); } /* * Initialize the plt start and end addresses. */ if ((pltbgn = (ulong_t)JMPREL(lmp)) != 0) pltend = pltbgn + (ulong_t)(PLTRELSZ(lmp)); relsiz = (ulong_t)(RELENT(lmp)); basebgn = ADDR(lmp); if (PLTRELSZ(lmp)) plthint = PLTRELSZ(lmp) / relsiz; /* * If we've been called upon to promote an RTLD_LAZY object to an * RTLD_NOW then we're only interested in scaning the .plt table. * An uninitialized .plt is the case where the associated got entry * points back to the plt itself. Determine the range of the real .plt * entries using the _PROCEDURE_LINKAGE_TABLE_ symbol. */ if (plt) { Slookup sl; relbgn = pltbgn; relend = pltend; if (!relbgn || (relbgn == relend)) return (1); /* * Initialize the symbol lookup data structure. */ SLOOKUP_INIT(sl, MSG_ORIG(MSG_SYM_PLT), lmp, lmp, ld_entry_cnt, elf_hash(MSG_ORIG(MSG_SYM_PLT)), 0, 0, 0, LKUP_DEFT); if ((symdef = elf_find_sym(&sl, &_lmp, &binfo, NULL)) == 0) return (1); _pltbgn = symdef->st_value; if (!(FLAGS(lmp) & FLG_RT_FIXED) && (symdef->st_shndx != SHN_ABS)) _pltbgn += basebgn; _pltend = _pltbgn + (((PLTRELSZ(lmp) / relsiz)) * M_PLT_ENTSIZE) + M_PLT_RESERVSZ; } else { /* * The relocation sections appear to the run-time linker as a * single table. Determine the address of the beginning and end * of this table. There are two different interpretations of * the ABI at this point: * * o The REL table and its associated RELSZ indicate the * concatenation of *all* relocation sections (this is the * model our link-editor constructs). * * o The REL table and its associated RELSZ indicate the * concatenation of all *but* the .plt relocations. These * relocations are specified individually by the JMPREL and * PLTRELSZ entries. * * Determine from our knowledege of the relocation range and * .plt range, the range of the total relocation table. Note * that one other ABI assumption seems to be that the .plt * relocations always follow any other relocations, the * following range checking drops that assumption. */ relbgn = (ulong_t)(REL(lmp)); relend = relbgn + (ulong_t)(RELSZ(lmp)); if (pltbgn) { if (!relbgn || (relbgn > pltbgn)) relbgn = pltbgn; if (!relbgn || (relend < pltend)) relend = pltend; } } if (!relbgn || (relbgn == relend)) { DBG_CALL(Dbg_reloc_run(lmp, 0, plt, DBG_REL_NONE)); return (1); } DBG_CALL(Dbg_reloc_run(lmp, M_REL_SHT_TYPE, plt, DBG_REL_START)); /* * If we're processing a dynamic executable in lazy mode there is no * need to scan the .rel.plt table, however if we're processing a shared * object in lazy mode the .got addresses associated to each .plt must * be relocated to reflect the location of the shared object. */ if (pltbgn && ((MODE(lmp) & RTLD_NOW) == 0) && (FLAGS(lmp) & FLG_RT_FIXED)) noplt = 1; /* * Loop through relocations. */ while (relbgn < relend) { mmapobj_result_t *mpp; uint_t sb_flags = 0; rtype = ELF_R_TYPE(((Rela *)relbgn)->r_info, M_MACH); /* * If this is a RELATIVE relocation in a shared object (the * common case), and if we are not debugging, then jump into a * tighter relocation loop (elf_reloc_relative). */ if ((rtype == R_AMD64_RELATIVE) && ((FLAGS(lmp) & FLG_RT_FIXED) == 0) && (DBG_ENABLED == 0)) { if (relacount) { relbgn = elf_reloc_relative_count(relbgn, relacount, relsiz, basebgn, lmp, textrel); relacount = 0; } else { relbgn = elf_reloc_relative(relbgn, relend, relsiz, basebgn, lmp, textrel); } if (relbgn >= relend) break; rtype = ELF_R_TYPE(((Rela *)relbgn)->r_info, M_MACH); } roffset = ((Rela *)relbgn)->r_offset; /* * If this is a shared object, add the base address to offset. */ if (!(FLAGS(lmp) & FLG_RT_FIXED)) { /* * If we're processing lazy bindings, we have to step * through the plt entries and add the base address * to the corresponding got entry. */ if (plthint && (plt == 0) && (rtype == R_AMD64_JUMP_SLOT) && ((MODE(lmp) & RTLD_NOW) == 0)) { /* * The PLT relocations (for lazy bindings) * are additive to what's already in the GOT. * This differs to what happens in * elf_reloc_relacount() and that's why we * just do it inline here. */ for (roffset = ((Rela *)relbgn)->r_offset; plthint; plthint--) { roffset += basebgn; /* * Perform the actual relocation. */ *((ulong_t *)roffset) += basebgn; relbgn += relsiz; roffset = ((Rela *)relbgn)->r_offset; } continue; } roffset += basebgn; } reladd = (long)(((Rela *)relbgn)->r_addend); rsymndx = ELF_R_SYM(((Rela *)relbgn)->r_info); rel = (Rela *)relbgn; relbgn += relsiz; /* * Optimizations. */ if (rtype == R_AMD64_NONE) continue; if (noplt && ((ulong_t)rel >= pltbgn) && ((ulong_t)rel < pltend)) { relbgn = pltend; continue; } /* * If we're promoting plts, determine if this one has already * been written. */ if (plt && ((*(ulong_t *)roffset < _pltbgn) || (*(ulong_t *)roffset > _pltend))) continue; /* * If this relocation is not against part of the image * mapped into memory we skip it. */ if ((mpp = find_segment((caddr_t)roffset, lmp)) == NULL) { elf_reloc_bad(lmp, (void *)rel, rtype, roffset, rsymndx); continue; } binfo = 0; /* * If a symbol index is specified then get the symbol table * entry, locate the symbol definition, and determine its * address. */ if (rsymndx) { /* * Get the local symbol table entry. */ symref = (Sym *)((ulong_t)SYMTAB(lmp) + (rsymndx * SYMENT(lmp))); /* * If this is a local symbol, just use the base address. * (we should have no local relocations in the * executable). */ if (ELF_ST_BIND(symref->st_info) == STB_LOCAL) { value = basebgn; name = (char *)0; /* * Special case TLS relocations. */ if (rtype == R_AMD64_DTPMOD64) { /* * Use the TLS modid. */ value = TLSMODID(lmp); } else if ((rtype == R_AMD64_TPOFF64) || (rtype == R_AMD64_TPOFF32)) { if ((value = elf_static_tls(lmp, symref, rel, rtype, 0, roffset, 0)) == 0) { ret = 0; break; } } } else { /* * If the symbol index is equal to the previous * symbol index relocation we processed then * reuse the previous values. (Note that there * have been cases where a relocation exists * against a copy relocation symbol, our ld(1) * should optimize this away, but make sure we * don't use the same symbol information should * this case exist). */ if ((rsymndx == psymndx) && (rtype != R_AMD64_COPY)) { /* LINTED */ if (psymdef == 0) { DBG_CALL(Dbg_bind_weak(lmp, (Addr)roffset, (Addr) (roffset - basebgn), name)); continue; } /* LINTED */ value = pvalue; /* LINTED */ name = pname; /* LINTED */ symdef = psymdef; /* LINTED */ symref = psymref; /* LINTED */ _lmp = plmp; /* LINTED */ binfo = pbinfo; if ((LIST(_lmp)->lm_tflags | AFLAGS(_lmp)) & LML_TFLG_AUD_SYMBIND) { value = audit_symbind(lmp, _lmp, /* LINTED */ symdef, dsymndx, value, &sb_flags); } } else { Slookup sl; /* * Lookup the symbol definition. * Initialize the symbol lookup data * structure. */ name = (char *)(STRTAB(lmp) + symref->st_name); SLOOKUP_INIT(sl, name, lmp, 0, ld_entry_cnt, 0, rsymndx, symref, rtype, LKUP_STDRELOC); symdef = lookup_sym(&sl, &_lmp, &binfo, in_nfavl); /* * If the symbol is not found and the * reference was not to a weak symbol, * report an error. Weak references * may be unresolved. */ /* BEGIN CSTYLED */ if (symdef == 0) { if (sl.sl_bind != STB_WEAK) { if (elf_reloc_error(lmp, name, rel, binfo)) continue; ret = 0; break; } else { psymndx = rsymndx; psymdef = 0; DBG_CALL(Dbg_bind_weak(lmp, (Addr)roffset, (Addr) (roffset - basebgn), name)); continue; } } /* END CSTYLED */ /* * If symbol was found in an object * other than the referencing object * then record the binding. */ if ((lmp != _lmp) && ((FLAGS1(_lmp) & FL1_RT_NOINIFIN) == 0)) { if (aplist_test(&bound, _lmp, AL_CNT_RELBIND) == 0) { ret = 0; break; } } /* * Calculate the location of definition; * symbol value plus base address of * containing shared object. */ if (IS_SIZE(rtype)) value = symdef->st_size; else value = symdef->st_value; if (!(FLAGS(_lmp) & FLG_RT_FIXED) && !(IS_SIZE(rtype)) && (symdef->st_shndx != SHN_ABS) && (ELF_ST_TYPE(symdef->st_info) != STT_TLS)) value += ADDR(_lmp); /* * Retain this symbol index and the * value in case it can be used for the * subsequent relocations. */ if (rtype != R_AMD64_COPY) { psymndx = rsymndx; pvalue = value; pname = name; psymdef = symdef; psymref = symref; plmp = _lmp; pbinfo = binfo; } if ((LIST(_lmp)->lm_tflags | AFLAGS(_lmp)) & LML_TFLG_AUD_SYMBIND) { dsymndx = (((uintptr_t)symdef - (uintptr_t)SYMTAB(_lmp)) / SYMENT(_lmp)); value = audit_symbind(lmp, _lmp, symdef, dsymndx, value, &sb_flags); } } /* * If relocation is PC-relative, subtract * offset address. */ if (IS_PC_RELATIVE(rtype)) value -= roffset; /* * Special case TLS relocations. */ if (rtype == R_AMD64_DTPMOD64) { /* * Relocation value is the TLS modid. */ value = TLSMODID(_lmp); } else if ((rtype == R_AMD64_TPOFF64) || (rtype == R_AMD64_TPOFF32)) { if ((value = elf_static_tls(_lmp, symdef, rel, rtype, name, roffset, value)) == 0) { ret = 0; break; } } } } else { /* * Special cases. */ if (rtype == R_AMD64_DTPMOD64) { /* * TLS relocation value is the TLS modid. */ value = TLSMODID(lmp); } else value = basebgn; name = (char *)0; } DBG_CALL(Dbg_reloc_in(LIST(lmp), ELF_DBG_RTLD, M_MACH, M_REL_SHT_TYPE, rel, NULL, 0, name)); /* * Make sure the segment is writable. */ if (((mpp->mr_prot & PROT_WRITE) == 0) && ((set_prot(lmp, mpp, 1) == 0) || (aplist_append(textrel, mpp, AL_CNT_TEXTREL) == NULL))) { ret = 0; break; } /* * Call relocation routine to perform required relocation. */ switch (rtype) { case R_AMD64_COPY: if (elf_copy_reloc(name, symref, lmp, (void *)roffset, symdef, _lmp, (const void *)value) == 0) ret = 0; break; case R_AMD64_JUMP_SLOT: if (((LIST(lmp)->lm_tflags | AFLAGS(lmp)) & (LML_TFLG_AUD_PLTENTER | LML_TFLG_AUD_PLTEXIT)) && AUDINFO(lmp)->ai_dynplts) { int fail = 0; int pltndx = (((ulong_t)rel - (uintptr_t)JMPREL(lmp)) / relsiz); int symndx = (((uintptr_t)symdef - (uintptr_t)SYMTAB(_lmp)) / SYMENT(_lmp)); (void) elf_plt_trace_write(roffset, lmp, _lmp, symdef, symndx, pltndx, (caddr_t)value, sb_flags, &fail); if (fail) ret = 0; } else { /* * Write standard PLT entry to jump directly * to newly bound function. */ DBG_CALL(Dbg_reloc_apply_val(LIST(lmp), ELF_DBG_RTLD, (Xword)roffset, (Xword)value)); *(ulong_t *)roffset = value; } break; default: value += reladd; /* * Write the relocation out. */ if (do_reloc_rtld(rtype, (uchar_t *)roffset, (Xword *)&value, name, NAME(lmp), LIST(lmp)) == 0) ret = 0; DBG_CALL(Dbg_reloc_apply_val(LIST(lmp), ELF_DBG_RTLD, (Xword)roffset, (Xword)value)); } if ((ret == 0) && ((LIST(lmp)->lm_flags & LML_FLG_TRC_WARN) == 0)) break; if (binfo) { DBG_CALL(Dbg_bind_global(lmp, (Addr)roffset, (Off)(roffset - basebgn), (Xword)(-1), PLT_T_FULL, _lmp, (Addr)value, symdef->st_value, name, binfo)); } } return (relocate_finish(lmp, bound, ret)); } /* * Initialize the first few got entries so that function calls go to * elf_rtbndr: * * GOT[GOT_XLINKMAP] = the address of the link map * GOT[GOT_XRTLD] = the address of rtbinder */ void elf_plt_init(void *got, caddr_t l) { uint64_t *_got; /* LINTED */ Rt_map *lmp = (Rt_map *)l; _got = (uint64_t *)got + M_GOT_XLINKMAP; *_got = (uint64_t)lmp; _got = (uint64_t *)got + M_GOT_XRTLD; *_got = (uint64_t)elf_rtbndr; } /* * Plt writing interface to allow debugging initialization to be generic. */ Pltbindtype /* ARGSUSED1 */ elf_plt_write(uintptr_t addr, uintptr_t vaddr, void *rptr, uintptr_t symval, Xword pltndx) { Rela *rel = (Rela*)rptr; uintptr_t pltaddr; pltaddr = addr + rel->r_offset; *(ulong_t *)pltaddr = (ulong_t)symval + rel->r_addend; DBG_CALL(pltcntfull++); return (PLT_T_FULL); } /* * Provide a machine specific interface to the conversion routine. By calling * the machine specific version, rather than the generic version, we insure that * the data tables/strings for all known machine versions aren't dragged into * ld.so.1. */ const char * _conv_reloc_type(uint_t rel) { static Conv_inv_buf_t inv_buf; return (conv_reloc_amd64_type(rel, 0, &inv_buf)); }