/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License, Version 1.0 only
 * (the "License").  You may not use this file except in compliance
 * with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 *
 * # ident	"%Z%%M%	%I%	%E% SMI"
 *
 * supported prop types: void, int, uint, float, string
 * supported prop access_modes: r, w, rw
 *
 * VERSION <version_number>  -- supported version number is 1.0
 *
 * name:<namepath> --     gives the anchor node
 *      where <namepath> is <nodename>[@<bus-addr>][?<prop>=<val>]
 *
 * _class:<classpath> --   gives the anchor node
 *      where <classpath> is <classname>[@<bus-addr>][?<prop>=<val>]
 *
 * NODE <name> <class>
 *       {describes a subtree}
 * ENDNODE
 *
 * PROP <name> <type> <access_mode> [<size> <value>] -- per property
 *
 * REFPROP <name> <dstnode>
 *
 * REFNODE <name> <class> with <destnode> -- Associates a new node
 *       with <destnode> if exists
 *       where 
 *             <name> is the nodename
 *             <class> is the picl class.
 *             <destnode> is name:<namepath> or _class:<classpath>
 *
 * If "name:" or "_class:" is not specified in the <path>,
 * the default is "name:"
 *
 */
#define PLATFORM_CLASS	jbus

VERSION 1.1
NODE frutree picl
    NODE chassis fru
	/*
	 * SunMC physical view view_points for this platform
	 * This will get moved to a separate SunMC physical view plugin later.
	 */
	PROP ViewPoints string r 0 "front rear side"

	/*
	 * Motherboard
	 */
	NODE MB location
	    PROP SlotType string r 0 "system-board"
	    PROP Label string r 0 "MB"
	ENDNODE

	/*
	 * Front panel interface board
	 */
	NODE FIOB location
	    PROP SlotType string r 0 "system-board"
	    PROP Label string r 0 "FIOB"
	    NODE system-board fru
		 PROP FRUDataAvailable void r
		 REFPROP _seeprom_source /platform/ebus@1f,464000/i2c@3,80/front-io-fru-prom@0,a4
		NODE RM0 location
		    PROP SlotType string r 0 "cdrom-slot"
		    PROP Label string r 0 "RM0"
		ENDNODE
	    ENDNODE
	ENDNODE

	NODE F0 location
	    PROP SlotType string r 0 "fan-unit"
	    PROP Label string r 0 "F0"
	    REFNODE system-fan0 fru WITH _class:/PLATFORM_CLASS/cpu?ID=0
	ENDNODE
	NODE F1 location
	    PROP SlotType string r 0 "fan-unit"
	    PROP Label string r 0 "F1"
	    REFNODE system-fan1 fru WITH _class:/PLATFORM_CLASS/cpu?ID=1
	ENDNODE
	NODE F2 location
	    PROP SlotType string r 0 "fan-unit"
	    PROP Label string r 0 "F2"
	    NODE system-fan2 fru
	    ENDNODE
	ENDNODE
	NODE F3 location
	    PROP SlotType string r 0 "fan-unit"
	    PROP Label string r 0 "F3"
	    NODE system-fan3 fru
	    ENDNODE
	ENDNODE
	NODE F4 location
	    PROP SlotType string r 0 "fan-unit"
	    PROP Label string r 0 "F4"
	    NODE system-fan4 fru
	    ENDNODE
	ENDNODE

	/*
	 * Power Supply
 	 */
	NODE PS0 location
	    PROP SlotType string r 0 "power-supply"
	    PROP Label string r 0 "PS0"
	    NODE power-supply fru
		 PROP FRUDataAvailable void r
		 REFPROP _seeprom_source /platform/ebus@1f,464000/i2c@3,80/psu-fru-prom@0,ae
	    ENDNODE
	ENDNODE

	/*
	 * SAS/SATA Backplane
	 */
	NODE SAS-BP fru				
	    PROP FRUDataAvailable void r
	    REFPROP _seeprom_source /platform/ebus@1f,464000/i2c@3,80/sas-backplane-fru-prom@0,a6
	    NODE HDD0 location
		PROP SlotType string r 0 "disk-slot"
		PROP Label string r 0 "HDD0"
	    ENDNODE
	    NODE HDD1 location
		PROP SlotType string r 0 "disk-slot"
		PROP Label string r 0 "HDD1"
	    ENDNODE
	    NODE HDD2 location
		PROP SlotType string r 0 "disk-slot"
		PROP Label string r 0 "HDD2"
	    ENDNODE
	    NODE HDD3 location
		PROP SlotType string r 0 "disk-slot"
		PROP Label string r 0 "HDD3"
	    ENDNODE
	ENDNODE
    ENDNODE
ENDNODE

/*
 * Add disk fru nodes for disks which are present.
 */
name:/frutree/chassis/SAS-BP/HDD0
REFNODE disk fru WITH name:/platform/pci@1e,600000/pci@0/pci@9/pci@0/scsi@1/sd@0,0

name:/frutree/chassis/SAS-BP/HDD1
REFNODE disk fru WITH name:/platform/pci@1e,600000/pci@0/pci@9/pci@0/scsi@1/sd@1,0

name:/frutree/chassis/SAS-BP/HDD2
REFNODE disk fru WITH name:/platform/pci@1e,600000/pci@0/pci@9/pci@0/scsi@1/sd@2,0

name:/frutree/chassis/SAS-BP/HDD3
REFNODE disk fru WITH name:/platform/pci@1e,600000/pci@0/pci@9/pci@0/scsi@1/sd@3,0

/*
 * Removable Media on front-io board
 */
name:/frutree/chassis/FIOB/system-board/RM0
REFNODE cdrom fru WITH name:/platform/pci@1e,600000/pci@0/pci@1/pci@0/ide@1f/sd@0,0

#include "system-board.info"