/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License, Version 1.0 only * (the "License"). You may not use this file except in compliance * with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2005 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #ifndef _ENVD_H #define _ENVD_H #pragma ident "%Z%%M% %I% %E% SMI" #include #include #ifdef __cplusplus extern "C" { #endif /* * Chicago Platform Details */ #define MAX_SENSORS 8 #define MAX_FANS 6 /* * Fan names and ids */ #define ENV_SYSTEM_FAN0 "system-fan0" #define ENV_SYSTEM_FAN1 "system-fan1" #define ENV_SYSTEM_FAN2 "system-fan2" #define ENV_SYSTEM_FAN3 "system-fan3" #define ENV_SYSTEM_FAN4 "system-fan4" #define SYSTEM_FAN0_ID 0 #define SYSTEM_FAN1_ID 1 #define SYSTEM_FAN2_ID 2 #define SYSTEM_FAN3_ID 3 #define SYSTEM_FAN4_ID 4 #define CPU0_FAN_ID SYSTEM_FAN0_ID #define CPU1_FAN_ID SYSTEM_FAN1_ID /* * Sensor names and ids */ #define SENSOR_CPU0 "cpu0" #define SENSOR_CPU1 "cpu1" #define SENSOR_MB "MotherBoard" #define SENSOR_ADT7462 "ADT7462" #define SENSOR_LM95221 "LM95221" #define SENSOR_FIRE "FireASIC" #define SENSOR_LSI1064 "LSI1064" #define SENSOR_FRONT_PANEL "Front_panel" #define CPU0_SENSOR_ID 0 #define CPU1_SENSOR_ID 1 #define ADT7462_SENSOR_ID 2 #define MB_SENSOR_ID 3 #define LM95221_SENSOR_ID 4 #define FIRE_SENSOR_ID 5 #define LSI1064_SENSOR_ID 6 #define FRONT_PANEL_SENSOR_ID 7 /* * Hard disk sensor names and ids */ #define ENV_DISK0 "hard-disk0" #define ENV_DISK1 "hard-disk1" #define ENV_DISK2 "hard-disk2" #define ENV_DISK3 "hard-disk3" #define DISK0_ID 0 #define DISK1_ID 1 #define DISK2_ID 2 #define DISK3_ID 3 /* * Thresholds and other constants */ #define DISK_SCAN_INTERVAL 10 #define DISK_HIGH_WARN_TEMPERATURE 55 #define DISK_LOW_WARN_TEMPERATURE 5 #define DISK_HIGH_SHUTDOWN_TEMPERATURE 60 #define DISK_LOW_SHUTDOWN_TEMPERATURE 0 #define DISK_INVALID_TEMP 0xFFFF #define LSI1064_VENDOR_ID 0x1000 #define LSI1064_DEVICE_ID 0x50 #define FAN_SCAN_INTERVAL 10 #define SENSOR_SCAN_INTERVAL 2 #define SENSOR_WARNING_DURATION 4 #define SENSOR_WARNING_INTERVAL 30 #define DISK_WARNING_INTERVAL 30 #define DISK_WARNING_DURATION 20 #define SENSOR_SHUTDOWN_INTERVAL 60 #define DISK_SHUTDOWN_INTERVAL 30 #define ENV_CONF_FILE "envmodel.conf" #define TUNABLE_CONF_FILE "piclenvd.conf" #define PM_DEVICE "/dev/pm" #define SHUTDOWN_CMD "/usr/sbin/shutdown -y -g 60 -i 5" #define PICL_PLUGINS_NODE "plugins" #define PICL_ENVIRONMENTAL_NODE "environmental" #define MAX_RETRIES_FOR_FAN_FAULT 10 #define MAX_FAN_RETRIES 14 #define MAX_SENSOR_RETRIES 14 #define TACH_TO_RPM(tach) (90000 * 60)/tach #define DISK0_PHYSPATH \ "/pci@1e,600000/pci@0/pci@a/pci@0/LSILogic,sas@1/sd@0,0" #define DISK1_PHYSPATH \ "/pci@1e,600000/pci@0/pci@a/pci@0/LSILogic,sas@1/sd@1,0" #define DISK2_PHYSPATH \ "/pci@1e,600000/pci@0/pci@a/pci@0/LSILogic,sas@1/sd@2,0" #define DISK3_PHYSPATH \ "/pci@1e,600000/pci@0/pci@a/pci@0/LSILogic,sas@1/sd@3,0" #define ENV_DISK0_DEVFS \ "/devices/pci@1e,600000/pci@0/pci@a/pci@0/LSILogic,sas@1/sd@0,0:a,raw" #define ENV_DISK1_DEVFS \ "/devices/pci@1e,600000/pci@0/pci@a/pci@0/LSILogic,sas@1/sd@1,0:a,raw" #define ENV_DISK2_DEVFS \ "/devices/pci@1e,600000/pci@0/pci@a/pci@0/LSILogic,sas@1/sd@2,0:a,raw" #define ENV_DISK3_DEVFS \ "/devices/pci@1e,600000/pci@0/pci@a/pci@0/LSILogic,sas@1/sd@3,0:a,raw" #define DISK0_NODE_PATH \ "name:/platform/pci@1e,600000/pci@0/pci@a/pci@0/LSILogic,sas@1/sd@0,0" #define DISK1_NODE_PATH \ "name:/platform/pci@1e,600000/pci@0/pci@a/pci@0/LSILogic,sas@1/sd@1,0" #define DISK2_NODE_PATH \ "name:/platform/pci@1e,600000/pci@0/pci@a/pci@0/LSILogic,sas@1/sd@2,0" #define DISK3_NODE_PATH \ "name:/platform/pci@1e,600000/pci@0/pci@a/pci@0/LSILogic,sas@1/sd@3,0" #define SCSI_CONTROLLER_NODE_PATH \ "name:/platform/pci@1e,600000/pci@0/pci@a/pci@0/LSILogic,sas@1" /* CPU Path Names */ #define CPU0_PATH "_class:/jbus/cpu?ID=0" #define CPU1_PATH "_class:/jbus/cpu?ID=1" #define ENV_MONITOR_DEVFS "/devices/ebus@1f,464000/env-monitor@3,0" /* * devfs-path for various fans and their min/max speeds */ #define ENV_SYSTEM_FAN0_DEVFS \ "/devices/ebus@1f,464000/env-monitor@3,0:fan_0" #define ENV_SYSTEM_FAN1_DEVFS \ "/devices/ebus@1f,464000/env-monitor@3,0:fan_1" #define ENV_SYSTEM_FAN2_DEVFS \ "/devices/ebus@1f,464000/env-monitor@3,0:fan_2" #define ENV_SYSTEM_FAN3_DEVFS \ "/devices/ebus@1f,464000/env-monitor@3,0:fan_3" #define ENV_SYSTEM_FAN4_DEVFS \ "/devices/ebus@1f,464000/env-monitor@3,0:fan_4" /* MIN and MAX SPEED are in RPM units */ #define CPU_FAN_SPEED_MIN 250 #define CPU_FAN_SPEED_MAX 5000 #define SYSTEM_FAN_SPEED_MIN 250 #define SYSTEM_FAN_SPEED_MAX 5000 /* * devfs-path for various temperature sensors and CPU platform path */ #define SENSOR_CPU0_DEVFS \ "/devices/ebus@1f,464000/env-monitor@3,0:cpu_0" #define SENSOR_CPU1_DEVFS \ "/devices/ebus@1f,464000/env-monitor@3,0:cpu_1" #define SENSOR_MB_DEVFS \ "/devices/ebus@1f,464000/env-monitor@3,0:mb" #define SENSOR_ADT7462_DEVFS \ "/devices/ebus@1f,464000/env-monitor@3,0:adt7462" #define SENSOR_LM95221_DEVFS \ "/devices/ebus@1f,464000/env-monitor@3,0:lm95221" #define SENSOR_FIRE_DEVFS \ "/devices/ebus@1f,464000/env-monitor@3,0:fire" #define SENSOR_LSI1064_DEVFS \ "/devices/ebus@1f,464000/env-monitor@3,0:lsi1064" #define SENSOR_FRONT_PANEL_DEVFS \ "/devices/ebus@1f,464000/env-monitor@3,0:front_panel" /* * Temperature type */ typedef int16_t tempr_t; #define SENSOR_TEMP_IN_WARNING_RANGE(val, sensorp) \ ((val) > (sensorp)->high_warning || \ (val) < (char)((sensorp)->low_warning)) #define SENSOR_TEMP_IN_SHUTDOWN_RANGE(val, sensorp) \ ((val) > (sensorp)->high_shutdown || \ (val) < (char)((sensorp)->low_shutdown)) #define DISK_TEMP_IN_WARNING_RANGE(val, diskp) \ ((val) > (diskp)->high_warning || \ (val) < (char)((diskp)->low_warning)) #define DISK_TEMP_IN_SHUTDOWN_RANGE(val, diskp) \ ((val) > (diskp)->high_shutdown || \ (val) < (char)((diskp)->low_shutdown)) #define SENSOR_WARN 1 #define SENSOR_OK 0 #define FAN_FAILED 1 #define FAN_OK 0 #define CPU0_HIGH_SHUTDOWN 100 #define CPU0_LOW_SHUTDOWN 0 #define CPU0_HIGH_WARNING 95 #define CPU0_LOW_WARNING 5 #define CPU0_HIGH_POWER_OFF 105 #define CPU0_LOW_POWER_OFF -5 #define CPU1_HIGH_SHUTDOWN 100 #define CPU1_LOW_SHUTDOWN 0 #define CPU1_HIGH_WARNING 95 #define CPU1_LOW_WARNING 5 #define CPU1_HIGH_POWER_OFF 105 #define CPU1_LOW_POWER_OFF -5 #define ADT7462_HIGH_SHUTDOWN 75 #define ADT7462_LOW_SHUTDOWN 0 #define ADT7462_HIGH_WARNING 70 #define ADT7462_LOW_WARNING 5 #define ADT7462_HIGH_POWER_OFF 80 #define ADT7462_LOW_POWER_OFF -5 #define MB_HIGH_SHUTDOWN 75 #define MB_LOW_SHUTDOWN 0 #define MB_HIGH_WARNING 70 #define MB_LOW_WARNING 5 #define MB_HIGH_POWER_OFF 80 #define MB_LOW_POWER_OFF -5 #define LM95221_HIGH_SHUTDOWN 75 #define LM95221_LOW_SHUTDOWN 0 #define LM95221_HIGH_WARNING 70 #define LM95221_LOW_WARNING 5 #define LM95221_HIGH_POWER_OFF 80 #define LM95221_LOW_POWER_OFF -5 #define FIRE_HIGH_SHUTDOWN 100 #define FIRE_LOW_SHUTDOWN 0 #define FIRE_HIGH_WARNING 95 #define FIRE_LOW_WARNING 5 #define FIRE_HIGH_POWER_OFF 105 #define FIRE_LOW_POWER_OFF -5 #define LSI1064_HIGH_SHUTDOWN 100 #define LSI1064_LOW_SHUTDOWN 0 #define LSI1064_HIGH_WARNING 95 #define LSI1064_LOW_WARNING 5 #define LSI1064_HIGH_POWER_OFF 105 #define LSI1064_LOW_POWER_OFF -5 #define FRONT_PANEL_HIGH_SHUTDOWN 70 #define FRONT_PANEL_LOW_SHUTDOWN 0 #define FRONT_PANEL_HIGH_WARNING 60 #define FRONT_PANEL_LOW_WARNING 5 #define FRONT_PANEL_HIGH_POWER_OFF 75 #define FRONT_PANEL_LOW_POWER_OFF -5 /* * Temperature sensor related data structure */ typedef struct env_sensor { char *name; /* sensor name */ char *devfs_path; /* sensor device devfs path */ int id; int fd; /* device file descriptor */ char high_shutdown; char high_warning; char low_warning; char low_shutdown; char low_power_off; char high_power_off; int error; /* error flag */ boolean_t present; /* sensor present */ tempr_t cur_temp; /* current temperature */ time_t warning_start; /* warning start time (secs) */ time_t warning_tstamp; /* last warning time (secs) */ time_t shutdown_tstamp; /* shutdown temp time (secs) */ boolean_t shutdown_initiated; /* shutdown initated */ } env_sensor_t; extern env_sensor_t *sensor_lookup(char *sensor_name); extern int get_temperature(env_sensor_t *, tempr_t *); typedef struct env_disk { char *name; /* disk name */ char *devfs_path; /* disk device devfs path */ char *physpath; /* used to be probe for IDLW TIME */ char *nodepath; /* used to detect presence of disk */ uchar_t id; int fd; /* device file descriptor */ boolean_t present; /* disk present */ boolean_t tpage_supported; /* Temperature page */ int current_temp; int ref_temp; int reliability_temp; uchar_t high_shutdown; uchar_t high_warning; uchar_t low_warning; uchar_t low_shutdown; time_t warning_start; /* warning start time (secs) */ time_t warning_tstamp; /* last warning time (secs) */ time_t shutdown_tstamp; /* shutdown temp time (secs) */ boolean_t shutdown_initiated; /* shutdown initated */ } env_disk_t; extern env_disk_t *disk_lookup(char *disk_name); extern int disk_temperature(env_disk_t *, tempr_t *); /* * Fan information data structure */ typedef int fanspeed_t; typedef struct env_fan { char *name; /* fan name */ char *devfs_path; /* fan device devfs path */ uchar_t id; fanspeed_t speed_min; /* minimum speed */ fanspeed_t speed_max; /* maximum speed */ int forced_speed; /* forced (fixed) speed */ int fd; /* device file descriptor */ boolean_t present; /* fan present */ int last_status; /* Fan status */ uint8_t cspeed; /* Current speed (tach) */ uint8_t lspeed; /* Last speed (tach) */ } env_fan_t; /* * Tuneables */ typedef struct env_tuneable { char *name; char type; void *value; int (*rfunc)(ptree_rarg_t *, void *); int (*wfunc)(ptree_warg_t *, const void *); int nbytes; picl_prophdl_t proph; } env_tuneable_t; extern env_fan_t *fan_lookup(char *fan_name); extern int get_fan_speed(env_fan_t *, fanspeed_t *); extern int set_fan_speed(env_fan_t *, fanspeed_t); extern int env_debug; extern void envd_log(int pri, const char *fmt, ...); /* * Various messages */ #define ENVD_PLUGIN_INIT_FAILED \ gettext("SUNW_piclenvd: initialization failed!\n") #define ENVD_PICL_SETUP_FAILED \ gettext("SUNW_piclenvd: PICL setup failed!\n") #define PM_THREAD_CREATE_FAILED \ gettext("SUNW_piclenvd: pmthr thread creation failed!\n") #define PM_THREAD_EXITING \ gettext("SUNW_piclenvd: pmthr exiting! errno:%d %s\n") #define DISK_TEMP_THREAD_EXITING \ gettext("SUNW_piclenvd: Disk temp thread exiting." \ " Disk temperature will not be monitored. errno:%d %s\n") #define ENVTHR_THREAD_CREATE_FAILED \ gettext("SUNW_piclenvd: envthr thread creation failed!\n") #define ENV_SHUTDOWN_MSG \ gettext("SUNW_piclenvd: '%s' sensor temperature %d outside safe " \ "limits (%d...%d). Shutting down the system.\n") #define ENV_WARNING_MSG \ gettext("SUNW_piclenvd: '%s' sensor temperature %d outside safe " \ "operating limits (%d...%d).\n") #define ENV_FAN_OPEN_FAIL \ gettext("SUNW_piclenvd: can't open '%s' fan path:%s errno:%d %s\n") #define ENV_SENSOR_OPEN_FAIL \ gettext("SUNW_piclenvd: can't open '%s' sensor path:%s errno:%d %s\n") #define ENV_SENSOR_ACCESS_FAIL \ gettext("SUNW_piclenvd: can't access '%s' sensor errno:%d %s\n") #define ENV_SENSOR_ACCESS_OK \ gettext("SUNW_piclenvd: '%s' sensor is accessible now.\n") #define ENV_FAN_FAILURE_WARNING_MSG \ gettext("SUNW_piclenvd: %s has Failed.\n" \ "(rpm = %s status = %s)\n") #define ENV_FAN_OK_MSG \ gettext("SUNW_piclenvd: %s is OKAY.\n") #ifdef __cplusplus } #endif #endif /* _ENVD_H */