if [ ! "$_VARIABLE_SUBR" ]; then _VARIABLE_SUBR=1
#
# Copyright (c) 2012-2014 Devin Teske
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
#
# $FreeBSD$
#
############################################################ INCLUDES

BSDCFG_SHARE="/usr/share/bsdconfig"
. $BSDCFG_SHARE/common.subr || exit 1
f_dprintf "%s: loading includes..." variable.subr
f_include $BSDCFG_SHARE/dialog.subr
f_include $BSDCFG_SHARE/strings.subr

############################################################ GLOBALS

VARIABLES=

#
# Default behavior is to call f_variable_set_defaults() when loaded.
#
: ${VARIABLE_SELF_INITIALIZE=1}

#
# File to write when f_dump_variables() is called.
#
: ${VARIABLE_DUMPFILE:=/etc/bsdconfig.vars}

############################################################ FUNCTIONS

# f_variable_new $handle $variable
#
# Register a new variable named $variable with the given reference-handle
# $handle. The environment variable $handle is set to $variable allowing you to
# use the f_getvar() function (from common.subr) with $handle to get the value
# of environment variable $variable. For example:
#
# 	f_variable_new VAR_ABC abc
#
# allows the later indirection:
#
# 	f_getvar $VAR_ABC
#
# to return the value of environment variable `abc'. Variables registered in
# this manner are recorded in the $VARIABLES environment variable for later
# allowing dynamic enumeration of so-called `registered/advertised' variables.
#
f_variable_new()
{
	local handle="$1" variable="$2"
	[ "$handle" ] || return $FAILURE
	f_dprintf "variable.subr: New variable %s -> %s" "$handle" "$variable"
	setvar $handle $variable
	VARIABLES="$VARIABLES${VARIABLES:+ }$handle"
}

# f_variable_get_value $var [ $fmt [ $opts ... ] ]
#
# Unless nonInteractive is set, prompt the user with a given value (pre-filled
# with the value of $var) and give them the chance to change the value.
#
# Unlike f_getvar() (from common.subr) which can return a variable to the
# caller on standard output, this function has no [meaningful] output.
#
# Returns success unless $var is either NULL or missing.
#
f_variable_get_value()
{
	local var="$1" cp

	[ "$var" ] || return $FAILURE

	if ! { f_getvar $var cp && ! f_interactive; }; then
		shift 1 # var
		f_dialog_input cp "$( printf "$@" )" "$cp" && setvar $var "$cp"
	fi

	return $SUCCESS
}

# f_variable_set_defaults
#
# Installs sensible defaults for registered/advertised variables.
#
f_variable_set_defaults()
{
	f_dprintf "f_variable_set_defaults: Initializing defaults..."

	#
	# Initialize various user-edittable values to their defaults
	#
	setvar $VAR_EDITOR		"${EDITOR:-/usr/bin/ee}"
	setvar $VAR_FTP_STATE		"auto"
	setvar $VAR_FTP_USER		"ftp"
	setvar $VAR_HOSTNAME		"$( hostname )"
	setvar $VAR_MEDIA_TIMEOUT	"300"
	setvar $VAR_NFS_SECURE		"NO"
	setvar $VAR_NFS_TCP		"NO"
	setvar $VAR_NFS_V3		"YES"
	setvar $VAR_PKG_TMPDIR		"/var/tmp"
	setvar $VAR_RELNAME		"$UNAME_R"

	#
	# Debugging
	#
	if f_debugging; then
		local var
		for var in \
			$VAR_EDITOR		\
			$VAR_FTP_STATE		\
			$VAR_FTP_USER		\
			$VAR_HOSTNAME		\
			$VAR_MEDIA_TIMEOUT	\
			$VAR_NFS_SECURE		\
			$VAR_NFS_TCP		\
			$VAR_NFS_V3		\
			$VAR_PKG_TMPDIR		\
			$VAR_RELNAME		\
		; do
			f_quietly f_getvar $var
		done
	fi

	f_dprintf "f_variable_set_defaults: Defaults initialized."
}

# f_dump_variables
#
# Dump a list of registered/advertised variables and their respective values to
# $VARIABLE_DUMPFILE. Returns success unless the file couldn't be written. If
# an error occurs, it is displayed using f_dialog_msgbox() (from dialog.subr).
#
f_dump_variables()
{
	local err
	if ! err=$(
		( for handle in $VARIABLES; do
			f_getvar $handle var || continue
			f_getvar $var value || continue
			f_shell_escape "$value" value
			printf "%s='%s'\n" "$var" "$value"
		  done > "$VARIABLE_DUMPFILE" ) 2>&1
	); then
		f_dialog_msgbox "$err"
		return $FAILURE
	fi
}

# f_debugging
#
# Are we in debug mode? Returns success if extra DEBUG information has been
# requested (by setting $debug to non-NULL), otherwise false.
#
f_debugging()
{
	local value
	f_getvar $VAR_DEBUG value && [ "$value" ]
}

# f_interactive
#
# Are we running interactively? Return error if $nonInteractive is set and non-
# NULL, otherwise return success.
#
f_interactive()
{
	local value
	! f_getvar $VAR_NONINTERACTIVE value || [ ! "$value" ]
}

# f_netinteractive
#
# Has the user specifically requested the network-portion of configuration and
# setup to be performed interactively? Returns success if the user has asked
# for the network configuration to be done interactively even if perhaps over-
# all non-interactive mode has been requested (by setting nonInteractive).
#
# Returns success if $netInteractive is set and non-NULL.
#
f_netinteractive()
{
	local value
	f_getvar $VAR_NETINTERACTIVE value && [ "$value" ]
}

# f_zfsinteractive
#
# Has the user specifically requested the ZFS-portion of configuration and
# setup to be performed interactively? Returns success if the user has asked
# for the ZFS configuration to be done interactively even if perhaps overall
# non-interactive mode has been requested (by setting nonInteractive).
#
# Returns success if $zfsInteractive is set and non-NULL.
#
f_zfsinteractive()
{
	local value
	f_getvar $VAR_ZFSINTERACTIVE value && [ "$value" ]
}

############################################################ MAIN

#
# Variables that can be tweaked from config files
#
#              Handle                   Variable Name
f_variable_new VAR_CONFIG_FILE		configFile
f_variable_new VAR_DEBUG		debug
f_variable_new VAR_DEBUG_FILE		debugFile
f_variable_new VAR_DIRECTORY_PATH	_directoryPath
f_variable_new VAR_DOMAINNAME		domainname
f_variable_new VAR_EDITOR		editor
f_variable_new VAR_EXTRAS		ifconfig_
f_variable_new VAR_FTP_DIR		ftpDirectory
f_variable_new VAR_FTP_HOST		ftpHost
f_variable_new VAR_FTP_PASS		ftpPass
f_variable_new VAR_FTP_PATH		_ftpPath
f_variable_new VAR_FTP_PORT		ftpPort
f_variable_new VAR_FTP_STATE		ftpState
f_variable_new VAR_FTP_USER		ftpUser
f_variable_new VAR_GATEWAY		defaultrouter
f_variable_new VAR_GROUP		group
f_variable_new VAR_GROUP_GID		groupGid
f_variable_new VAR_GROUP_MEMBERS	groupMembers
f_variable_new VAR_GROUP_PASSWORD	groupPassword
f_variable_new VAR_HOSTNAME		hostname
f_variable_new VAR_HTTP_DIR		httpDirectory
f_variable_new VAR_HTTP_FTP_MODE	httpFtpMode
f_variable_new VAR_HTTP_HOST		httpHost
f_variable_new VAR_HTTP_PATH		_httpPath
f_variable_new VAR_HTTP_PORT		httpPort
f_variable_new VAR_HTTP_PROXY		httpProxy
f_variable_new VAR_HTTP_PROXY_HOST	httpProxyHost
f_variable_new VAR_HTTP_PROXY_PATH	_httpProxyPath
f_variable_new VAR_HTTP_PROXY_PORT	httpProxyPort
f_variable_new VAR_IFCONFIG		ifconfig_
f_variable_new VAR_IPADDR		ipaddr
f_variable_new VAR_IPV6ADDR		ipv6addr
f_variable_new VAR_IPV6_ENABLE		ipv6_activate_all_interfaces
f_variable_new VAR_KEYMAP		keymap
f_variable_new VAR_MEDIA_TIMEOUT	MEDIA_TIMEOUT
f_variable_new VAR_MEDIA_TYPE		mediaType
f_variable_new VAR_NAMESERVER		nameserver
f_variable_new VAR_NETINTERACTIVE	netInteractive
f_variable_new VAR_NETMASK		netmask
f_variable_new VAR_NETWORK_DEVICE	netDev
f_variable_new VAR_NFS_HOST		nfsHost
f_variable_new VAR_NFS_PATH		nfsPath
f_variable_new VAR_NFS_SECURE		nfs_reserved_port_only
f_variable_new VAR_NFS_TCP		nfs_use_tcp
f_variable_new VAR_NFS_V3		nfs_use_v3
f_variable_new VAR_NONINTERACTIVE	nonInteractive
f_variable_new VAR_NO_CONFIRM		noConfirm
f_variable_new VAR_NO_ERROR		noError
f_variable_new VAR_NO_INET6		noInet6
f_variable_new VAR_PACKAGE		package
f_variable_new VAR_PKG_TMPDIR		PKG_TMPDIR
f_variable_new VAR_PORTS_PATH		ports
f_variable_new VAR_RELNAME		releaseName
f_variable_new VAR_SLOW_ETHER		slowEthernetCard
f_variable_new VAR_TRY_DHCP		tryDHCP
f_variable_new VAR_TRY_RTSOL		tryRTSOL
f_variable_new VAR_UFS_PATH		ufs
f_variable_new VAR_ZFSINTERACTIVE	zfsInteractive

#
# Self-initialize unless requested otherwise
#
f_dprintf "%s: VARIABLE_SELF_INITIALIZE=[%s]" \
          variable.subr "$VARIABLE_SELF_INITIALIZE"
case "$VARIABLE_SELF_INITIALIZE" in
""|0|[Nn][Oo]|[Oo][Ff][Ff]|[Ff][Aa][Ll][Ss][Ee]) : do nothing ;;
*) f_variable_set_defaults
esac

f_dprintf "%s: Successfully loaded." variable.subr

fi # ! $_VARIABLE_SUBR