if [ ! "$_PACKAGES_PACKAGES_SUBR" ]; then _PACKAGES_PACKAGES_SUBR=1
#
# Copyright (c) 2013-2016 Devin Teske
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
#
#
############################################################ INCLUDES

BSDCFG_SHARE="/usr/share/bsdconfig"
. $BSDCFG_SHARE/common.subr || exit 1
f_dprintf "%s: loading includes..." "$0"
f_include $BSDCFG_SHARE/dialog.subr
f_include $BSDCFG_SHARE/device.subr
f_include $BSDCFG_SHARE/media/common.subr
f_include $BSDCFG_SHARE/packages/categories.subr
f_include $BSDCFG_SHARE/packages/index.subr
f_include $BSDCFG_SHARE/packages/musthavepkg.subr
f_include $BSDCFG_SHARE/strings.subr

BSDCFG_LIBE="/usr/libexec/bsdconfig"
f_include_lang $BSDCFG_LIBE/include/messages.subr

############################################################ CONFIGURATION

#
# How many packages to display (maximum) per dialog menubox.
#
: ${PACKAGE_MENU_PAGESIZE:=2000}

############################################################ GLOBALS

#
# Package extensions to try
#
PACKAGE_EXTENSIONS=".txz .tbz .tbz2 .tgz"

#
# Variables used to track runtime states
#
PACKAGES_DETECTED=	# Boolean (NULL/non-NULL); detected installed packages?
PACKAGE_CATEGORIES=	# List of package categories parsed from INDEX
SELECTED_PACKAGES=	# Packages selected by user in [X]dialog(1) interface

#
# Options
#
[ "${SHOW_DESC+set}" ] || SHOW_DESC=1

############################################################ FUNCTIONS

# eval f_package_accent_category_menu $var_to_set $CATEGORY_MENU_LIST
#
# Accent the CATEGORY_MENU_LIST produced by f_index_read() (see
# packages/index.subr). Accented information includes adding an asterisk to the
# category name if its index has been cached, adding the number of installed
# packages for each category, and adding the number _selected_ packages for
# each category.
#
# NOTE: The reason `eval' is recommended/shown for the syntax above is because
# the $CATEGORY_MENU_LIST generated by f_index_read() is meant to be expanded
# prior to execution (it contains a series of pre-quoted strings which act as
# the interpolated command arguments).
#
f_package_accent_category_menu()
{
	local var_to_set="$1" category cat desc help varcat menu_buf n
	shift 1 # var_to_set
	while [ $# -gt 0 ]; do
		category="${1%\*}" desc="${2%%; *}" help="$3"
		shift 3 # cat/desc/help

		cat="${category# }" # Trim lead space inserted by sort-method
		f_str2varname "$cat" varcat

		# Add number of installed packages for this category (if any)
		n=0
		case "$cat" in
		"$msg_all") debug= f_getvar "_All_ninstalled" n ;;
		         *) debug= f_getvar "_${varcat}_ninstalled" n ;;
		esac &&
		[ $n -ge 1 ] && desc="$desc; $n $msg_installed_lc"

		# Add number of selected packages for this category (if any)
		n=0
		case "$cat" in
		"$msg_all") debug= f_getvar "_All_nselected" n ;;
		         *) debug= f_getvar "_${varcat}_nselected" n ;;
		esac &&
		[ $n -ge 1 ] && desc="$desc; $n $msg_selected"

		# Re-Add asterisk to the category if its index has been cached
		f_isset _index_page_${varcat}_1 && category="$category*"

		# Update buffer with modified elements
		menu_buf="$menu_buf
		'$category' '$desc' '$help'" # End-Quote
	done
	setvar "$var_to_set" "$menu_buf" # return our buffer
}

# f_package_select $package ...
#
# Add $package to the list of tracked/selected packages. If $package is already
# being tracked (already apears in $SELECTED_PACKAGES), this function amounts
# to having no effect.
#
f_package_select()
{
	local package pkgsel
	while [ $# -gt 0 ]; do
		package="$1"
		shift 1 # package
		for pkgsel in $SELECTED_PACKAGES; do
			[ "$package" = "$pkgsel" ] && return $SUCCESS
		done
		SELECTED_PACKAGES="$SELECTED_PACKAGES $package"
		f_dprintf "Added %s to selection list" "$package"
	done
	SELECTED_PACKAGES="${SELECTED_PACKAGES# }" # Trim leading space
}

# f_package_deselect $package ...
#
# Remove $package from the list of tracked/selected packages. If $package is
# not being tracked (doesn't appear in $SELECTED_PACKAGES), this function
# amounts to having no effet.
#
f_package_deselect()
{
	local package pkgsel
	while [ $# -gt 1 ]; do
		local new_list=""
		package="$1"
		shift 1 # package
		for pkgsel in $SELECTED_PACKAGES; do
			[ "$pkgsel" = "$package" ] && continue
			new_list="$new_list${new_list:+ }$pkgsel"
		done
		SELECTED_PACKAGES="$new_list"
		f_dprintf "Removed %s from selection list" "$package"
	done
}

# f_package_detect_installed
#
# Detect installed packages. Currently this uses pkg-query(8) for querying
# entries and marks each entry as an installed/selected package.
#
f_package_detect_installed()
{
	local package varpkg
	for package in $( pkg query "%n-%v" ); do
		f_str2varname $package varpkg
		export _mark_$varpkg=X # exported for awk(1) ENVIRON[]
		f_package_select $package
	done
}

# f_package_calculate_totals
#
# Calculate number of installed/selected packages for each category listed in
# $PACKAGE_CATEGORIES (the number of installed packages for $category is stored
# as $_${varcat}_ninstalled -- where $varcat is the product of `f_str2varname
# $category varcat' -- and number selected packages as $_${varcat}_nselected).
# Also calculates the total number of installed/selected packages stored as
# $_All_ninstalled and $_All_nselected.
#
# Calculations are performed by checking "marks". A "mark" is stored as
# $_mark_$varpkg -- where $varpkg is the product of `f_str2varname $package
# varpkg'. A mark can be "X" for an installed package, `I' for a package that
# is marked for installation, "R" for a package that is marked for re-install,
# and "U" for a package that is marked for uninstallation. If a package mark is
# NULL or a single space (e.g., " "), the package is considered to be NOT
# selected (and therefore does not increment the counts calculated herein).
#
f_package_calculate_totals()
{
	local pkg varpkg mark cat varcat pkgcat n tselected=0 tinstalled=0
	for cat in $PACKAGE_CATEGORIES; do
		f_str2varname $cat varcat
		setvar _${varcat}_ninstalled=0
		setvar _${varcat}_nselected=0
	done
	for pkg in $SELECTED_PACKAGES; do
		f_str2varname $pkg varpkg
		mark=
		f_getvar _mark_$varpkg mark
		case "$mark" in
		""|" ") : ;;
		X) tinstalled=$(( $tinstalled + 1 )) ;;
		*) tselected=$(( $tselected + 1 ))
		esac
		f_getvar _categories_$varpkg pkgcat
		for cat in $pkgcat; do
			f_str2varname $cat varcat
			case "$mark" in
			""|" ") : ;;
			X) debug= f_getvar _${varcat}_ninstalled n
			   setvar _${varcat}_ninstalled $(( $n + 1 )) ;;
			*) debug= f_getvar _${varcat}_nselected n
			   setvar _${varcat}_nselected $(( $n + 1 ))
			esac
		done
	done
	_All_nselected=$tselected
	_All_ninstalled=$tinstalled
}

# f_package_calculate_rundeps
#
# Update package dependencies by first unmarking all dependencies and then
# re-marking all dependencies of packages marked for either install ("I") or
# re-install ("R").
#
f_package_calculate_rundeps()
{
	local pkg varpkg mark rundeps dep vardep

	#
	# First unmark all the existing run-dependencies
	#
	f_dprintf "Unselecting package run-dependencies..."
	for pkg in $SELECTED_PACKAGES; do
		f_str2varname $pkg varpkg
		mark=
		debug= f_getvar _mark_$varpkg mark
		# Only unmark if it's marked as a Dependency
		if [ "$mark" = "D" ]; then
			f_dprintf "%s unselected" $pkg
			unset _mark_$varpkg
			f_package_deselect $pkg
		fi
	done

	#
	# Processes selected packages, adding dependencies
	#
	f_dprintf "Re-selecting package run-dependencies..."
	for pkg in $SELECTED_PACKAGES; do
		f_str2varname $pkg varpkg
		mark=
		debug= f_getvar _mark_$varpkg mark
		# Skip pkg unless marked for [Re-]Install
		[ "$mark" = "I" -o "$mark" = "R" ] || continue
		f_getvar _rundeps_$varpkg rundeps
		for dep in $rundeps; do
			f_str2varname $dep vardep
			mark=
			debug= f_getvar _mark_$vardep mark
			# Skip dep if already marked
			[ "${mark:- }" = " " ] || continue
			export _mark_$vardep="D"
			f_package_select $dep
		done
	done

	f_dprintf "Finished recalculating dependencies."
}

# f_package_menu_categories $var_to_set $defaultitem
#
# Dislay the menu of package categories, complete with package counts for each
# category, accents, and other miscellany. If $defaultitem is non-NULL and
# matches one of the existing menu-items, it will be pre-highlighted in the
# menu dialog (HINT: Use f_dialog_menutag_fetch() to populate a local variable
# that is passed as $defaultitem to highlight the user's last selection).
#
f_package_menu_categories()
{
	local var_to_get="$1" defaultitem="$2"
	local prompt="$msg_please_select_a_category_to_display"
	local menu_list="
		'> $msg_review' '$msg_review_desc' '$msg_review_help'
	" # End-Quote
	local hline=

	f_package_calculate_rundeps
		# updates package mark variables and SELECTED_PACKAGES
	f_package_calculate_totals
		# creates _{varcat}_ninstalled and _{varcat}_nselected

	local category_list
	debug= f_getvar "$var_to_get" category_list || return $DIALOG_CANCEL

	# Accent the category menu list with ninstalled/nselected
	eval f_package_accent_category_menu category_list $category_list

	# Add list of categories to menu list
	menu_list="$menu_list $category_list"

	local height width rows
	eval f_dialog_menu_with_help_size height width rows \
	                                  \"\$DIALOG_TITLE\"     \
	                                  \"\$DIALOG_BACKTITLE\" \
	                                  \"\$prompt\"           \
	                                  \"\$hline\"            \
	                                  $menu_list
	local menu_choice
	menu_choice=$( eval $DIALOG \
		--title \"\$DIALOG_TITLE\"         \
		--backtitle \"\$DIALOG_BACKTITLE\" \
		--hline \"\$hline\"                \
		--item-help                        \
		--default-item \"\$defaultitem\"   \
		--ok-label \"$msg_select\"         \
		--cancel-label \"$msg_cancel\"     \
		--menu \"\$prompt\"                \
		$height $width $rows               \
		$menu_list                         \
		2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD
	)
	local retval=$?
	f_dialog_menutag_store -s "$menu_choice"
	return $retval
}

# f_package_index_get_page $category $page [$var_to_set [$var_to_get]]
#
# Obtain a [potentially cached] page of the INDEX file for a given $category.
# If $page is 1 and the cache has not yet been generated, the cache-generating
# function f_index_extract_pages() (above) is called to generate all pages
# (not just the requested page) in cache before returning the requested page.
# If $page is not 1 and there is no cached page, failure status is returned.
#
f_package_index_get_page()
{
	local category="$1" page="$2" var_to_set="$3" var_to_get="$4" varcat
	f_str2varname "$category" varcat
	if ! debug= f_getvar "_index_page_${varcat}_$page" $var_to_set &&
	   [ "$page" = "1" ]
	then
		f_show_info "$msg_building_package_menus"
		local pagesize="$PACKAGE_MENU_PAGESIZE"
		f_index_extract_pages "${var_to_get:-PACKAGE_INDEX}" \
			_index_page_${varcat} "$pagesize" "$category"
		debug= f_getvar _index_page_${varcat}_$page $var_to_set

		# Update category default-item because now we're cached
		[ $page -eq 1 ] &&
		    category_defaultitem="${category_defaultitem%\*}*"
	else
		return $FAILURE
	fi
}

# f_package_menu_select $category [$page [$defaultitem]]
#
# Display list of packages for $category, optionally $page N and with a default
# item selected. If $page is omitted, the first page is displayed (but this
# only matters if there are multiple pages; which is determined by the global
# maximum $PACKAGE_MENU_PAGESIZE).
#
# On success, if the user doesn't press ESC or choose Cancel, use
# f_dialog_menuitem_fetch() to populate a local variable with the item (not
# tag) corresponding to the user's selection. The tag portion of the user's
# selection is available through f_dialog_menutag_fetch().
#
f_package_menu_select()
{
	local __funcname=f_package_menu_deselect
	local category="$1" page="${2:-1}"
	local prompt= # Calculated below
	local menu_list # Calculated below
	local defaultitem="$3"
	local hline="$hline_arrows_tab_punc_enter"

	f_isinteger "$page" || return $DIALOG_CANCEL

	local varcat
	f_str2varname "$category" varcat

	# Get number of packages for this category
	local npkgs=0
	case "$category" in
	"$msg_all"|"") npkgs="${_npkgs:-0}" ;;
	*) f_getvar _npkgs_$varcat npkgs
	esac

	# Calculate number of pages
	local npages=$(( ${npkgs:=0} / $PACKAGE_MENU_PAGESIZE ))

	# Add a page to the pagecount if not evenly divisible
	[ $(( $npages * $PACKAGE_MENU_PAGESIZE )) -lt $npkgs ] &&
		npages=$(( $npages + 1 ))

	# Print some debugging information
	f_dprintf "f_package_menu_select: category=[%s] npkgs=%u npages=%u" \
	          "$category" "$npkgs" "$npages"

	local add_prev="" add_next=""
	local previous_page="$msg_previous_page" next_page="$msg_next_page"
	if [ $page -gt 1 ]; then
		add_prev=1
		# Accent the `Previous Page' item with an asterisk
		# if the page-before-previous is loaded/cached
		f_isset _index_page_${varcat}_$(( $page - 1 )) &&
			previous_page="$previous_page*"
	fi
	if [ $page -lt $npages ]; then
		add_next=1
		# Accent the `Next Page' item with an asterisk
		# if the page-after-next is loaded/cached
		f_isset _index_page_${varcat}_$(( $page + 1 )) &&
			next_page="$next_page*"
	fi

	local index_page __index
	if [ "$category" = "$msg_all" ]; then
		f_eval_catch -k __index $__funcname pkg \
			"pkg rquery -a '%s'"  "%n|%o||%c"
	else
		f_eval_catch -k __index $__funcname pkg \
			"pkg rquery -g '%s' '%s/\*'"  "%n|%o||%c" "$category"
	fi
	f_package_index_get_page "$category" $page index_page __index

	menu_list="
		${add_prev:+'> $previous_page' '' ${SHOW_DESC:+''}}
		${add_next:+'> $next_page' '' ${SHOW_DESC:+''}}
	$(
		export SHOW_DESC
		export VALID_VARNAME_CHARS
		echo "$index_page" | awk -F'|' -v view="port" '
		BEGIN {
			valid_chars = ENVIRON["VALID_VARNAME_CHARS"]
			prefix = ""
		}
		{
			cur_prefix = tolower(substr($1, 1, 1))
			printf "'\''"
			if ( prefix != cur_prefix )
				prefix = cur_prefix
			else
				printf " "
			package = $1
			if ( view == "port" )
				desc = $2
			varpkg = package
			gsub("[^" valid_chars "]", "_", varpkg)
			mark = ENVIRON["_mark_" varpkg]
			if ( ! mark ) mark = " "
			printf "%s'\'' '\''[%c] %s'\''",
			       package, mark, desc
			if ( ENVIRON["SHOW_DESC"] ) {
				help = $4
				gsub(/'\''/, "'\''\\'\'\''", help)
				printf " '\''%s'\''", help
			}
			printf "\n"
		}'
	)
		${add_prev:+'> $previous_page' '' ${SHOW_DESC:+''}}
		${add_next:+'> $next_page' '' ${SHOW_DESC:+''}}
	" # End-Quote

	# Accept/Translate i18n "All" but other category names must
	# match tree definitions from INDEX, ports, FTP, etc.
	case "$category" in
	"$msg_all"|"") f_category_desc_get "All" prompt ;;
	            *) f_category_desc_get "$category" prompt ;;
	esac
	f_sprintf prompt "%s $msg_page_of_npages" "$prompt" "$page" "$npages"

	local mheight mwidth mrows
	eval f_dialog_menu${SHOW_DESC:+_with_help}_size mheight mwidth mrows \
	        	\"\$DIALOG_TITLE\" \"\$DIALOG_BACKTITLE\" \
	        	\"\$prompt\" \"\$hline\" $menu_list
	local iheight iwidth
	f_dialog_infobox_size iheight iwidth \
	         	"$DIALOG_TITLE" "$DIALOG_BACKTITLE" \
	         	"$msg_processing_selection"

	local menu_choice
	menu_choice=$( eval $DIALOG \
		--title \"\$DIALOG_TITLE\"         \
		--backtitle \"\$DIALOG_BACKTITLE\" \
		--hline \"\$hline\"                \
		--keep-tite                        \
		--ok-label \"$msg_select\"         \
		--cancel-label \"$msg_back\"       \
		${SHOW_DESC:+--item-help}          \
		--default-item \"\$defaultitem\"   \
		--menu \"\$prompt\"                \
		$mheight $mwidth $mrows            \
		$menu_list                         \
		--and-widget                       \
		${USE_XDIALOG:+--no-buttons}       \
		--infobox \"\$msg_processing_selection\" \
		$iheight $iwidth                   \
		2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD
	)
	local retval=$?
	f_dialog_data_sanitize menu_choice
	f_dialog_menutag_store "$menu_choice"

	if [ $retval -eq $DIALOG_OK ]; then
		local item
		item=$( eval f_dialog_menutag2item${SHOW_DESC:+_with_help} \
		             	\"\$menu_choice\" $menu_list )
		f_dialog_menuitem_store "$item"
	fi

	return $retval
}

# f_package_menu_deselect $package
#
# Display a menu, asking the user what they would like to do with $package
# with regard to "deselecting" an already installed package. Choices include
# uninstall, re-install, or cancel (leave $package marked as installed).
# Returns success if the user does not press ESC or choose Cnacel. Use the
# f_dialog_menutag_fetch() function upon success to retrieve the user's choice.
#
f_package_menu_deselect()
{
	local package="$1"
	local prompt # Calculated below
	local menu_list="
		'X $msg_installed' '$msg_installed_desc'
		'R $msg_reinstall' '$msg_reinstall_desc'
		'U $msg_uninstall' '$msg_uninstall_desc'
	" # End-Quote
	local hline="$hline_alnum_arrows_punc_tab_enter"

	f_sprintf prompt "$msg_what_would_you_like_to_do_with" "$package"

	local height width rows
	eval f_dialog_menu_size height width rows \
	                        \"\$DIALOG_TITLE\"     \
	                        \"\$DIALOG_BACKTITLE\" \
	                        \"\$prompt\"           \
	                        \"\$hline\"            \
	                        $menu_list
	local menu_choice
	menu_choice=$( eval $DIALOG \
		--title \"\$DIALOG_TITLE\"         \
		--backtitle \"\$DIALOG_BACKTITLE\" \
		--hline \"\$hline\"                \
		--ok-label \"$msg_select\"         \
		--cancel-label \"$msg_cancel\"     \
		--menu \"\$prompt\"                \
		$height $width $rows               \
		$menu_list                         \
		2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD
	)
	local retval=$?
	f_dialog_menutag_store -s "$menu_choice"
	return $retval
}

# f_package_review
#
# Display a review screen, showing selected packages and what they are marked
# for, before proceeding (if the user does not press ESC or choose Cancel) to
# operate on each selection. Returns error if no packages have been selected,
# or the user has pressed ESC, or if they have chosen Cancel.
#
f_package_review()
{
	local funcname=f_package_review
	local prompt # Calculated below
	local menu_list # Calculated below
	local hline="$hline_alnum_arrows_punc_tab_enter"

	f_dprintf "$funcname: SELECTED_PACKAGES=[%s]" "$SELECTED_PACKAGES"

	f_sprintf prompt "$msg_reviewing_selected_packages" "$_All_nselected"

	local package varpkg mark
	for package in $SELECTED_PACKAGES; do
		mark=
		f_str2varname "$package" varpkg
		f_getvar _mark_$varpkg mark
		[ "$mark" -a ! "${mark#[IRUD]}" ] || continue
		menu_list="$menu_list
			'$mark' '$package'
		" # End-Quote
	done
	if [ ! "$menu_list" ]; then
		f_show_msg "$msg_no_packages_were_selected_for_extraction"
		return $DIALOG_CANCEL # Might have selected this by accident
	fi
	menu_list=$( echo "$menu_list" | sort )

	local height width rows
	eval f_dialog_menu_size height width rows \
	                        \"\$DIALOG_TITLE\"     \
	                        \"\$DIALOG_BACKTITLE\" \
	                        \"\$prompt\"           \
	                        \"\$hline\"            \
	                        $menu_list

	# Show the review menu (ignore menu choice)
	eval $DIALOG \
		--title \"\$DIALOG_TITLE\"         \
		--backtitle \"\$DIALOG_BACKTITLE\" \
		--hline \"\$hline\"                \
		--ok-label \"\$msg_proceed\"       \
		--cancel-label \"\$msg_cancel\"    \
		--menu \"\$prompt\"                \
		$height $width $rows               \
		$menu_list                         \
		2> /dev/null || return $?
			# Return if the user pressed ESC or chose Cancel/No

	#
	# Process each of the selected packages:
	# + First, process packages marked for Install.
	# + Second, process packages marked for Re-install.
	# + Finally, process packages marked for Uninstall.
	#
	for package in $SELECTED_PACKAGES; do
		mark=
		f_str2varname "$package" varpkg
		debug= f_getvar _mark_$varpkg mark
		[ "$mark" = "I" ] || continue
		f_dprintf "$funcname: Installing %s package" "$package"
		f_package_add "$package"
	done
	for package in $SELECTED_PACKAGES; do
		mark=
		f_str2varname "$package" varpkg
		debug= f_getvar _mark_$varpkg mark
		[ "$mark" = "R" ] || continue
		f_dprintf "$funcname: Reinstalling %s package" "$package"
		f_package_reinstall "$package"
	done
	for package in $SELECTED_PACKAGES; do
		mark=
		f_str2varname "$package" varpkg
		debug= f_getvar _mark_$varpkg mark
		[ "$mark" = "U" ] || continue
		f_dprintf "$funcname: Uninstalling %s package" "$package"
		f_package_delete "$package" || continue
		f_package_deselect "$package"
	done

	return $DIALOG_OK
}

# f_package_config
#
# Allow the user to configure packages and install them. Initially, a list of
# package categories is loaded/displayed. When the user selects a category,
# the menus for that category are built (unlike sysinstall which built all
# category menus up-front -- which also took forever, despite the fact that
# few people visit more than a couple of categories each time).
#
f_package_config()
{
	# Did we get an INDEX?
	f_index_initialize || return $FAILURE
		# Creates following variables (indirectly via f_index_read())
		#   CATEGORY_MENU_LIST _categories_{varpkg} _rundeps_{varpkg}
		#   PACKAGE_CATEGORIES _npkgs

	f_show_info "$msg_building_package_main_menu"

	# Detect installed packages (updates marks/SELECTED_PACKAGES)
	f_package_detect_installed
	export PACKAGES_DETECTED=1 # exported for awk(1) ENVIRON[]

	local retval category varcat defaultitem category_defaultitem=""
	while :; do
		# Display the list of package categories
		f_package_menu_categories \
			CATEGORY_MENU_LIST "$category_defaultitem"
		retval=$?
		f_dialog_menutag_fetch category
		f_dprintf "retval=%u mtag=[%s]" $retval "$category"
		category_defaultitem="$category"

		[ $retval -eq $DIALOG_OK ] || break

		# Maybe the user chose an action (like `Review')
		case "$category" in
		"> $msg_review")
			f_package_review && break
			continue ;;
		"> "*)
			continue
		esac

		# Anything else is a package category

		category=${category# } # Trim leading space if present
		category=${category%\*} # Trim trailing asterisk if present

		f_str2varname "$category" varcat

		local page package varpkg mark menu_choice
		while :; do
			# Display the list of packages for selected category
			page=1 defaultitem=""
			f_getvar _defaultitem_$varcat defaultitem
			f_getvar _defaultpage_$varcat page
			f_package_menu_select \
				"$category" "${page:=1}" "$defaultitem"
			retval=$?
			f_dialog_menutag_fetch menu_choice
			f_dprintf "retval=%u mtag=[%s]" $retval "$menu_choice"

			# NOTE: When --and-widget is used only ESC will cause
			# dialog(1) to return without going to the next widget.
			# This is alright in our case as we can still detect
			# the Cancel button because stdout will be NULL.
			# Alternatively, Xdialog(1) will terminate with 1
			# if/when Cancel is chosen on any widget.
			if [ $retval -eq $DIALOG_ESC -o ! "$menu_choice" ]
			then
				break
			elif [ $retval -eq $DIALOG_CANCEL ]; then
				# Using X11, Xdialog(1) returned 1 for Cancel
				f_show_msg "%s" "$menu_choice"
				break
			elif [ $retval -ne $DIALOG_OK ]; then
				# X11-related error occurred using Xdialog(1)
				f_show_msg "%s" "$menu_choice"
				break
			fi

			defaultitem="$menu_choice"

			# NOTE: f_package_menu_select() does not show the
			# `Previous Page' or `Next Page' items unless needed
			case "$menu_choice" in
			"> $msg_previous_page"|"> $msg_previous_page*")
				page=$(( $page - 1 ))
				setvar _defaultpage_$varcat $page
				# Update default-item to match accent that will
				# be applied by f_package_menu_select(); if the
				# page-before-prev is cached, add an asterisk.
				if f_isset \
					_index_page_${varcat}_$(( $page - 1 ))
				then
					defaultitem="${defaultitem%\*}*"
				else
					defaultitem="${defaultitem%\*}"
				fi
				setvar _defaultitem_$varcat "$defaultitem"
				continue ;;
			"> $msg_next_page"|"> $msg_next_page*")
				page=$(( $page + 1 ))
				setvar _defaultpage_$varcat $page
				# Update default-item to match accent that will
				# be applied by f_package_menu_select(); if the
				# page-after-next is cached, add an asterisk.
				if f_isset \
					_index_page_${varcat}_$(( $page + 1 ))
				then
					defaultitem="${defaultitem%\*}*"
				else
					defaultitem="${defaultitem%\*}"
				fi
				setvar _defaultitem_$varcat "$defaultitem"
				continue ;;
			"> "*) # Unknown navigation/action item
				setvar _defaultpage_$varcat $page
				continue ;; # Do not treat as a package
			*)
				setvar _defaultitem_$varcat "$defaultitem"
			esac

			# Treat any other selection as a package
			package="${menu_choice# }" # Trim leading space
			f_str2varname $package varpkg
			f_dialog_menuitem_fetch mark
			mark="${mark#?}"
			mark="${mark%%\] *}"
			case "$mark" in
			"I")
				mark=" "
				f_package_deselect $package
				;;
			" "|"D")
				mark="I"
				f_package_select $package
				;;
			"X"|"R"|"U")
				f_package_menu_deselect $package || continue
				f_dialog_menutag_fetch menu_choice
				case "$menu_choice" in
				"X $msg_installed")
					f_package_deselect "$package"
					mark="X"
					;;
				"R $msg_reinstall")
					f_package_select "$package"
					mark="R"
					;;
				"U $msg_uninstall")
					f_package_select "$package"
					mark="U"
					;;
				esac
				;;
			esac
			export _mark_$varpkg="$mark"
				# NOTE: exported for awk(1) ENVIRON[]
		done
	done
}

# f_package_add $package_name [$depended]
#
# Like f_package_extract(), but assumes current media device and chases deps.
# Note that $package_name should not contain the archive suffix (e.g., `.tbz').
# If $depended is present and non-NULL, the package is treated as a dependency
# (in this function, dependencies are not handled any differently, but the
# f_package_extract() function is passed this value and it displays a different
# message when installing a dependency versus non-dependency).
#
f_package_add()
{
	local name="$1" depended="$2" status=$SUCCESS retval

	local alert=f_show_msg no_confirm=
	f_getvar $VAR_NO_CONFIRM no_confirm
	[ "$no_confirm" ] && alert=f_show_info

	if ! { [ "$name" ] || { f_getvar $VAR_PACKAGE name && [ "$name" ]; }; }
	then
		f_dprintf "packageAdd: %s" \
		          "$msg_no_package_name_passed_in_package_variable"
		return $FAILURE
	fi

	{ # Verify and initialize device media if-defined
		f_media_verify &&
		f_device_init device_media &&
		f_index_initialize
	} || return $FAILURE

	# Now we have (indirectly via f_index_read()):
	#   CATEGORY_MENU_LIST _categories_{varpkg} _rundeps_{varpkg}
	#   PACKAGE_CATEGORIES _npkgs

	local varpkg
	f_str2varname "$name" varpkg

	# Just as-in the user-interface (opposed to scripted-use), only allow
	# packages with at least one category to be recognized.
	#
	local pkgcat=
	if ! f_getvar _categories_$varpkg pkgcat || [ ! "$pkgcat" ]; then
		# $pkg may be a partial name, search the index (this is slow)
		f_index_search PACKAGE_INDEX $name name
		if [ ! "$name" ]; then
			f_show_msg \
			    "$msg_sorry_package_was_not_found_in_the_index" \
			    "$name"
			return $FAILURE
		fi
		f_str2varname "$name" varpkg
	fi

	# If invoked through the scripted interface, we likely have not yet
	# detected the installed packages -- something we should do only once.
	#
	if [ ! "$PACKAGES_DETECTED" ]; then
		f_dprintf "f_package_add: Detecting installed packages"
		f_package_detect_installed
		export PACKAGES_DETECTED=1 # exported for awk(1) ENVIRON[]
	fi
	# Now we have: _mark_{varpkg}=X for all installed packages

	#
	# Since we're maintaining data structures for installed packages,
	# short-circuit the package dependency checks if the package is already
	# installed. This prevents wasted cycles, minor delays between package
	# extractions, and worst-case an infinite loop with a certain faulty
	# INDEX file.
	#
	local mark=
	f_getvar _mark_$varpkg mark && [ "$mark" = "X" ] && return $SUCCESS

	local dep vardep rundeps=
	f_getvar _rundeps_$varpkg rundeps
	for dep in $rundeps; do
		f_str2varname "$dep" vardep

		# Skip dependency if already installed
		mark=
		f_getvar _mark_$vardep mark && [ "$mark" = "X" ] && continue

		# Just as-in the user-interface (opposed to scripted-use), only
		# allow packages with at least one category to be recognized.
		#
		local depcat=
		if ! f_getvar _categories_$vardep depcat || [ ! "$depcat" ]
		then
			$alert "$msg_required_package_not_found" "$dep"
			[ "$no_confirm" ] && sleep 2
		fi

		f_package_add "$dep"
		retval=$?
		if [ $retval -ne $SUCCESS ]; then
			status=$(( $status | $retval ))

			# XXX package could be on a future disc volume
			# XXX (not supporting multiple disc volumes yet)

			$alert "$msg_loading_of_dependent_package_failed" \
			       "$dep"
			[ "$no_confirm" ] && sleep 2
		fi
	done
	[ $status -eq $SUCCESS ] || return $status

	#
	# Done with the deps? Try to load the real m'coy.
	#

	f_package_extract device_media "$name" "$depended"
	retval=$?
	if [ $retval -ne $SUCCESS ]; then
		status=$(( $status | $retval ))
	else
		setvar _mark_$varpkg X
	fi

	return $status
}

# f_package_extract $device $name [$depended]
#
# Extract a package based on a namespec and media device. If $depended is
# present and non-NULL, the notification displayed while installing the package
# has "as a dependency" appended.
#
f_package_extract()
{
	local funcname=f_package_extract
	local device="$1" name="$2" depended="$3"
	local devname=

	f_musthavepkg_init # Make sure we have a usable pkg(8) with $PKG_ABI

	$device get name devname
	f_dprintf "$funcname: device=[%s] name=[%s] depended=[%s]" \
	          "$devname" "$name" "$depended"

	# Check to make sure it's not already there
	local varpkg mark=
	f_str2varname "$name" varpkg
	f_getvar _mark_$varpkg mark
	[ "$mark" = "X" ] && return $SUCCESS

	if ! f_device_init $device; then
		f_show_msg \
		    "$msg_unable_to_initialize_media_type_for_package_extract"
		return $FAILURE
	fi

	# If necessary, initialize the ldconfig hints
	[ -f "/var/run/ld-elf.so.hints" ] ||
		f_quietly ldconfig /usr/lib /usr/lib/compat /usr/local/lib

	# Make a couple paranoid locations for temp
	# files to live if user specified none
	local tmpdir
	f_getvar $VAR_PKG_TMPDIR:-/var/tmp tmpdir
	f_quietly mkdir -p -m 1777 "$tmpdir"

	local path device_type
	$device get type device_type
	case "$name" in
	*/*) path="$name" ;;
	*)
		if [ "$device_type" = "$DEVICE_TYPE_HTTP" ]; then
			path="$PKG_ABI/latest/All/$name"
		else
			path="packages/$PKG_ABI/All/$name"
		fi
	esac

	# We have a path, call the device strategy routine to check the file
	local pkg_ext found=
	for pkg_ext in "" $PACKAGE_EXTENSIONS; do
		if f_device_get $device "$path$pkg_ext" $PROBE_EXIST; then
			path="$path$pkg_ext"
			found=1
			break
		elif [ "$device_type" = "$DEVICE_TYPE_HTTP" ] &&
		     f_device_get $device \
			"packages/$PKG_ABI/All/$name$pkg_ext" $PROBE_EXIST
		then
			# Mirroring physical media over HTTP
			path="packages/$PKG_ABI/All/$name$pkg_ext"
			found=1
			break
		fi
	done
	[ "$found" ] && f_dprintf "$funcname: found path=[%s] dev=[%s]" \
	                          "$path" "$devname"

	local alert=f_show_msg no_confirm=
	f_getvar $VAR_NO_CONFIRM no_confirm
	[ "$no_confirm" ] && alert=f_show_info

	if [ ! "$found" ]; then
		f_dprintf "$funcname: No such %s file on %s device" \
	                  "$path" "$devname"
		$alert "$msg_unable_to_fetch_package_from_selected_media" \
		       "$name"
		[ "$no_confirm" ] && sleep 2
		return $FAILURE
	fi

	if [ "$depended" ]; then
		f_show_info "$msg_adding_package_as_a_dependency_from_media" \
		            "$name" "$devname"
	else
		f_show_info "$msg_adding_package_from_media" "$name" "$devname"
	fi

	# Request the package be added via pkg-install(8)
	if f_debugging; then
		f_eval_catch $funcname pkg \
			'pkg -d install -${depended:+A}y "%s"' "$name"
	else
		f_eval_catch $funcname pkg \
			'pkg install -${depended:+A}y "%s"' "$name"
	fi
	if [ $? -ne $SUCCESS ]; then
		$alert "$msg_pkg_install_apparently_did_not_like_the_package" \
		       "$name"
		[ "$no_confirm" ] && sleep 2
	else
		f_show_info "$msg_package_was_added_successfully" "$name"
		sleep 1
	fi

	return $SUCCESS
}

# f_package_delete $name
#
# Delete package by full $name (lacks archive suffix; e.g., `.tbz').
#
f_package_delete()
{
	local funcname=f_package_delete
	local name="$1"

	if ! { [ "$name" ] || { f_getvar $VAR_PACKAGE name && [ "$name" ]; }; }
	then
		f_dprintf "packageDelete: %s" \
		          "$msg_no_package_name_passed_in_package_variable"
		return $FAILURE
	fi

	f_dprintf "$funcname: name=[%s]" "$name"

	[ "$name" ] || return $FAILURE

	{ # Verify and initialize device media if-defined
		f_media_verify &&
		f_device_init device_media &&
		f_index_initialize
	} || return $FAILURE

	# Now we have (indirectly via f_index_read()):
	#   CATEGORY_MENU_LIST _categories_{varpkg} _rundeps_{varpkg}
	#   PACKAGE_CATEGORIES _npkgs

	local varpkg
	f_str2varname "$name" varpkg

	# Just as-in the user-interface (opposed to scripted-use), only allow
	# packages with at least one category to be recognized.
	#
	local pkgcat=
	if ! f_getvar _categories_$varpkg pkgcat || [ ! "$pkgcat" ]; then
		# $pkg may be a partial name, search the index (this is slow)
		f_index_search PACKAGE_INDEX "$name" name
		if [ ! "$name" ]; then
			f_show_msg \
			    "$msg_sorry_package_was_not_found_in_the_index" \
			    "$name"
			return $FAILURE
		fi
		f_str2varname "$name" varpkg
	fi

	# If invoked through the scripted interface, we likely have not yet
	# detected the installed packages -- something we should do only once.
	#
	if [ ! "$PACKAGES_DETECTED" ]; then
		f_dprintf "$funcname: Detecting installed packages"
		f_package_detect_installed
		export PACKAGES_DETECTED=1 # exported for awk(1) ENVIRON[]
	fi
	# Now we have: _mark_{varpkg}=X for all installed packages

	#
	# Return failure if the package is not already installed.
	#
	local pkgmark=
	f_getvar _mark_$varpkg pkgmark
	if ! [ "$pkgmark" -a ! "${pkgmark#[XUR]}" ]; then
		f_show_msg "$msg_package_not_installed_cannot_delete" "$name"
		return $FAILURE
	fi

	#
	# Check for dependencies
	#
	local pkgsel depc=0 udeps=
	for pkgsel in $SELECTED_PACKAGES; do
		local mark=
		f_str2varname $pkgsel varpkg
		debug= f_getvar _mark_$varpkg mark
		[ "$mark" -a ! "${mark#[XUR]}" ] || continue
		local dep rundeps=
		debug= f_getvar _rundeps_$varpkg rundeps
		for dep in $rundeps; do
			if [ "$dep" = "$name" ]; then
				# Maybe this package is marked for deletion too
				if [ "$mark" = "U" ]; then
					udeps="$udeps $pkgsel"
				else
					depc=$(( $depc + 1 ))
				fi
				break
			fi
		done
	done
	if [ $depc -gt 0 ]; then
		local grammatical_s=
		[ $depc -gt 1 ] && grammatical_s=s
		f_show_msg \
			"$msg_package_is_needed_by_other_installed_packages" \
			"$name" "$depc" "$grammatical_s"
		return $FAILURE
	fi

	#
	# Chase dependencies that are marked for uninstallation
	#
	for pkgsel in $udeps; do
		f_dprintf "$funcname: Uninstalling dependency %s (%s)" \
		          "$pkgsel" "marked for delete"
		f_package_delete "$pkgsel"
	done

	#
	# OK to perform the delete (no other packages depend on it)...
	#
	f_show_info "$msg_uninstalling_package_waiting_for_pkg_delete" "$name"
	if f_debugging; then
		f_eval_catch $funcname pkg 'pkg -d delete -y "%s"' "$name"
	else
		f_eval_catch $funcname pkg 'pkg delete -y "%s"' "$name"
	fi
	if [ $? -ne $SUCCESS ]; then
		f_show_msg "$msg_pkg_delete_failed" "$name"
		return $FAILURE
	else
		f_dprintf "$funcname: pkg-delete(8) of %s successful" "$name"
		f_str2varname "$name" varpkg
		setvar _mark_$varpkg ""
	fi
}

# f_package_reinstall $name
#
# A simple wrapper to f_package_delete() + f_package_add()
#
f_package_reinstall()
{
	f_package_delete "$1" && f_package_add "$1"
}

############################################################ MAIN

f_dprintf "%s: Successfully loaded." packages/packages.subr

fi # ! $_PACKAGES_PACKAGES_SUBR