if [ ! "$_NETWORKING_DEVICE_SUBR" ]; then _NETWORKING_DEVICE_SUBR=1
#
# Copyright (c) 2006-2013 Devin Teske
# All Rights Reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
#
# $FreeBSD$
#
############################################################ INCLUDES

BSDCFG_SHARE="/usr/share/bsdconfig"
. $BSDCFG_SHARE/common.subr || exit 1
f_dprintf "%s: loading includes..." networking/device.subr
f_include $BSDCFG_SHARE/device.subr
f_include $BSDCFG_SHARE/dialog.subr
f_include $BSDCFG_SHARE/sysrc.subr
f_include $BSDCFG_SHARE/media/tcpip.subr
f_include $BSDCFG_SHARE/networking/common.subr
f_include $BSDCFG_SHARE/networking/ipaddr.subr
f_include $BSDCFG_SHARE/networking/media.subr
f_include $BSDCFG_SHARE/networking/netmask.subr
f_include $BSDCFG_SHARE/networking/resolv.subr
f_include $BSDCFG_SHARE/networking/routing.subr

BSDCFG_LIBE="/usr/libexec/bsdconfig" APP_DIR="120.networking"
f_include_lang $BSDCFG_LIBE/$APP_DIR/include/messages.subr

############################################################ GLOBALS

#
# Settings used while interacting with various dialog(1) menus
#
: ${DIALOG_MENU_NETDEV_KICK_INTERFACES=1}
: ${DIALOG_MENU_NETDEV_SLEEP_AFTER_KICK=3}

############################################################ FUNCTIONS

# f_dialog_menu_netdev [$default]
#
# Display a list of network devices with descriptions. Optionally, if present
# and non-NULL, initially highlight $default interface.
#
f_dialog_menu_netdev()
{
	local defaultitem="${1%\*}" # Tim trailing asterisk if present

	#
	# Display a message to let the user know we're working...
	# (message will remain until we throw up the next dialog)
	#
	f_dialog_info "$msg_probing_network_interfaces"

	#
	# Get list of usable network interfaces
	#
	local d='[[:digit:]]+:'
	local iflist="`echo "$(ifconfig -l):" | sed -E -e "
		# Convert all spaces to colons
		y/ /:/

		# Prune unsavory interfaces
		s/lo$d//g
		s/ppp$d//g
		s/sl$d//g
		s/faith$d//g

		# Convert all colons back into spaces
		y/:/ /
	"`"

	#
	# Optionally kick interfaces in the head to get them to accurately
	# track the carrier status in realtime (required on FreeBSD).
	#
	if [ "$DIALOG_MENU_NETDEV_KICK_INTERFACES" ]; then
		DIALOG_MENU_NETDEV_KICK_INTERFACES=

		local ifn
		for ifn in $iflist; do
			f_quietly ifconfig $ifn up
		done

		if [ "$DIALOG_MENU_NETDEV_SLEEP_AFTER_KICK" ]; then
			# interfaces need time to update carrier status
			sleep $DIALOG_MENU_NETDEV_SLEEP_AFTER_KICK
		fi
	fi

	#
	# Mark any "active" interfaces with an asterisk (*)
	# to the right of the device name.
	#
	interfaces=$(
		for ifn in $iflist; do
			active=$( ifconfig $ifn | awk \
			'
				( $1 == "status:" ) \
				{
					if ( $2 == "active" ) { print 1; exit }
				}
			' )
			printf "'%s%s' '%s'\n" \
				$ifn "${active:+*}" "$( f_device_desc $ifn )"
		done
	)
	if [ ! "$interfaces" ]; then
		f_dialog_msgbox "$msg_no_network_interfaces"
		return $FAILURE
	fi

	#
	# Maybe the default item was marked as active
	#
	if [ "$defaultitem" ]; then
		ifconfig "$defaultitem" 2> /dev/null | awk \
			'( $1 == "status:" && $2 != "active" ) { exit 0 }' ||
			defaultitem="$defaultitem*"
	fi

	local hline="$hline_arrows_tab_enter"

	#
	# Ask user to select an interface
	#
	local prompt size
	prompt="$msg_select_network_interface"
	size=$( eval f_dialog_menu_size \
	        	\"\$DIALOG_TITLE\"     \
	        	\"\$DIALOG_BACKTITLE\" \
	        	\"\$prompt\"           \
	        	\"\$hline\"            \
	        	$interfaces            )
	local dialog_menu
	dialog_menu=$( eval $DIALOG \
		--title \"\$DIALOG_TITLE\"         \
		--backtitle \"\$DIALOG_BACKTITLE\" \
		--hline \"\$hline\"                \
		--ok-label \"\$msg_ok\"            \
		--cancel-label \"\$msg_cancel\"    \
		--default-item \"\$defaultitem\"   \
		--menu \"\$prompt\" $size          \
		$interfaces                        \
		2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD
	)
	local retval=$?
	setvar DIALOG_MENU_$$ "$dialog_menu"
	return $retval
}

# f_dialog_menu_netdev_edit $interface $ipaddr $netmask $options $dhcp
#
# Allow a user to edit network interface settings. Current values are not
# probed but rather taken from the positional arguments.
#
f_dialog_menu_netdev_edit()
{
	local interface="$1" ipaddr="$2" netmask="$3" options="$4" dhcp="$5"
	local prompt menu_list size

	#
	# Create a duplicate set of variables for change-tracking...
	#
	local ipaddr_orig="$2"  \
	      netmask_orig="$3" \
	      options_orig="$4" \
	      dhcp_orig="$5"

	local hline="$hline_arrows_tab_enter"
	prompt=$( printf "$msg_network_configuration" "$interface" )

	#
	# Loop forever until the user has finished configuring the different
	# components of the network interface.
	#
	# To apply the settings, we need to know each of the following:
	# 	- IP Address
	# 	- Network subnet mask
	# 	- Additional ifconfig(8) options
	#
	# It is only when we have all of the above values that we can make the
	# changes effective because all three options must be specified at-once
	# to ifconfig(8).
	#
	local defaultitem=
	while :; do
		local dhcp_status="$msg_disabled"
		[ "$dhcp" ] && dhcp_status="$msg_enabled"

		#
		# Display configuration-edit menu
		#
		menu_list="
			'X $msg_save_exit' '$msg_return_to_previous_menu'
			'2 $msg_dhcp'      '$dhcp_status'
			'3 $msg_ipaddr4'   '$ipaddr'
			'4 $msg_netmask'   '$netmask'
			'5 $msg_options'   '$options'
		"
		size=$( eval f_dialog_menu_size \
		        	\"\$DIALOG_TITLE\"     \
		        	\"\$DIALOG_BACKTITLE\" \
		        	\"\$prompt\"           \
		        	\"\$hline\"            \
		        	$menu_list             )
		local dialog_menu
		dialog_menu=$( eval $DIALOG \
			--title \"\$DIALOG_TITLE\"         \
			--backtitle \"\$DIALOG_BACKTITLE\" \
			--hline \"\$hline\"                \
			--ok-label \"\$msg_ok\"            \
			--cancel-label \"\$msg_cancel\"    \
			--help-button                      \
			--help-label \"\$msg_help\"        \
			${USE_XDIALOG:+--help \"\"}        \
			--default-item \"\$defaultitem\"   \
			--menu \"\$prompt\" $size          \
			$menu_list                         \
			2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD
		)

		local retval=$?
		setvar DIALOG_MENU_$$ "$dialog_menu"
		local tag="$( f_dialog_menutag )"

		if [ $retval -eq 2 ]; then
			# The Help button was pressed
			f_show_help "$TCP_HELPFILE"
			continue
		elif [ $retval -ne $SUCCESS ]; then
			# "Cancel" was chosen (-1) or ESC was pressed (255)
			return $retval
		else
			# Only update default-item on success
			defaultitem="$tag"
		fi

		#
		# Call the below ``modifier functions'' whose job it is to take
		# input from the user and assign the newly-acquired values back
		# to the ipaddr, netmask, and options variables for us to re-
		# read and display in the summary dialog.
		#
		case "$tag" in
		X\ *) break;;
		2\ *) #
		      # Do not proceed if/when there are NFS-mounts currently
		      # active. If the network is changed while NFS-exported
		      # directories are mounted, the system may hang (if any
		      # NFS mounts are using that interface).
		      #
		      if f_nfs_mounted && ! f_jailed; then
		      	local setting="$( printf "$msg_current_dhcp_status" \
		      	                         "$interface" "$dhcp_status" )"
			f_show_msg "$msg_nfs_mounts_may_cause_hang" "$setting"
		      	continue
		      fi

		      #
		      # Toggle DHCP status
		      #
		      if [ "$dhcp_status" = "$msg_enabled" ]; then
		      	dhcp=
		      else
		      	trap - SIGINT
		      	( # Execute within sub-shell to allow/catch Ctrl-C
		      	  trap 'exit $FAILURE' SIGINT
		      	  msg=$( printf "$msg_scanning_for_dhcp" "$interface" )
		      	  if [ "$USE_XDIALOG" ]; then
		      	  	(
		      	  	  f_quietly ifconfig $interface delete
		      	  	  f_quietly dhclient $interface
		      	  	) |
		      	  	  f_xdialog_info "$msg"
		      	  else
		      	  	f_dialog_info "$msg"
		      	  	f_quietly ifconfig $interface delete
		      	  	f_quietly dhclient $interface
		      	  fi
		      	)
		      	retval=$?
		      	trap 'interrupt' SIGINT
		      	if [ $retval -eq $SUCCESS ]; then
		      		dhcp=1
		      		ipaddr=$( f_ifconfig_inet $interface )
		      		netmask=$( f_ifconfig_netmask $interface )
		      		options=

		      		# Fixup search/domain in resolv.conf(5)
		      		hostname=$( f_sysrc_get \
				            	'hostname:-$(hostname)' )
		      		f_dialog_resolv_conf_update "$hostname"
		      	fi
		      fi
		      ;;
		3\ *) f_dialog_input_ipaddr "$interface" "$ipaddr"
		      [ $? -eq $SUCCESS ] && dhcp=;;
		4\ *) f_dialog_input_netmask "$interface" "$netmask"
		      [ $? -eq $SUCCESS -a "$_netmask" ] && dhcp=;;
		5\ *) f_dialog_menu_media_options "$interface" "$options"
		      [ $? -eq $SUCCESS ] && dhcp=;;
		esac
	done

	#
	# Save only if the user changed at least one feature of the interface
	#
	if [ "$ipaddr"  != "$ipaddr_orig"  -o \
	     "$netmask" != "$netmask_orig" -o \
	     "$options" != "$options_orig" -o \
	     "$dhcp"    != "$dhcp_orig" ]
	then
		f_show_info "$msg_saving_network_interface" "$interface"

		local value=
		if [ "$dhcp" ]; then
			f_sysrc_delete defaultrouter
			value=DHCP
		else
			value="inet $ipaddr netmask $netmask"
			value="$value${options:+ }$options"
		fi

		f_sysrc_set ifconfig_$interface "$value"
	fi

	#
	# Re/Apply the settings if desired
	#
	if [ ! "$dhcp" ]; then
		if f_yesno "$msg_bring_interface_up" "$interface"
		then
			f_show_info "$msg_bring_interface_up" "$interface"

			local dr="$( f_sysrc_get defaultrouter )" err
			if [ "$dr" = "NO" -o ! "$dr" ]; then
				dr=$( f_route_get_default )
				[ "$dr" ] && f_sysrc_set defaultrouter "$dr"
			fi
			#
			# Make a backup of resolv.conf(5) before using
			# ifconfig(8) and then restore it afterward. This
			# allows preservation of nameservers acquired via
			# DHCP on FreeBSD-8.x (normally lost as ifconfig(8)
			# usage causes dhclient(8) to exit which scrubs
			# resolv.conf(5) by-default upon termination).
			#
			f_quietly cp -fp "$RESOLV_CONF" "$RESOLV_CONF.$$"
			err=$( ifconfig $interface inet $ipaddr \
			       	netmask $netmask $options 2>&1 )
			if [ $? -eq $SUCCESS ]; then
				if [ "$dr" -a "$dr" != "NO" ]; then
					err=$( route add default "$dr" 2>&1 )
					[ $? -eq $SUCCESS ] || \
						dialog_msgbox "$err"
				fi
			else
				dialog_msgbox "$err"
			fi
			if cmp -s "$RESOLV_CONF" "$RESOLV_CONF.$$"; then
				f_quietly rm -f "$RESOLV_CONF.$$"
			else
				f_quietly mv -f "$RESOLV_CONF.$$" "$RESOLV_CONF"
			fi
		fi
	fi

	return $SUCCESS
}

############################################################ MAIN

f_dprintf "%s: Successfully loaded." networking/device.subr

fi # ! $_NETWORKING_DEVICE_SUBR