/*- * Copyright (c) 2010 Hudson River Trading LLC * Written by: John H. Baldwin * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if MAXMEMDOM > 1 struct cpu_info { int enabled:1; int has_memory:1; int domain; } cpus[MAX_APIC_ID + 1]; struct mem_affinity mem_info[VM_PHYSSEG_MAX + 1]; int num_mem; static ACPI_TABLE_SRAT *srat; static vm_paddr_t srat_physaddr; static int vm_domains[VM_PHYSSEG_MAX]; static ACPI_TABLE_SLIT *slit; static vm_paddr_t slit_physaddr; static int vm_locality_table[MAXMEMDOM * MAXMEMDOM]; static void srat_walk_table(acpi_subtable_handler *handler, void *arg); /* * SLIT parsing. */ static void slit_parse_table(ACPI_TABLE_SLIT *s) { int i, j; int i_domain, j_domain; int offset = 0; uint8_t e; /* * This maps the SLIT data into the VM-domain centric view. * There may be sparse entries in the PXM namespace, so * remap them to a VM-domain ID and if it doesn't exist, * skip it. * * It should result in a packed 2d array of VM-domain * locality information entries. */ if (bootverbose) printf("SLIT.Localities: %d\n", (int) s->LocalityCount); for (i = 0; i < s->LocalityCount; i++) { i_domain = acpi_map_pxm_to_vm_domainid(i); if (i_domain < 0) continue; if (bootverbose) printf("%d: ", i); for (j = 0; j < s->LocalityCount; j++) { j_domain = acpi_map_pxm_to_vm_domainid(j); if (j_domain < 0) continue; e = s->Entry[i * s->LocalityCount + j]; if (bootverbose) printf("%d ", (int) e); /* 255 == "no locality information" */ if (e == 255) vm_locality_table[offset] = -1; else vm_locality_table[offset] = e; offset++; } if (bootverbose) printf("\n"); } } /* * Look for an ACPI System Locality Distance Information Table ("SLIT") */ static int parse_slit(void) { if (resource_disabled("slit", 0)) { return (-1); } slit_physaddr = acpi_find_table(ACPI_SIG_SLIT); if (slit_physaddr == 0) { return (-1); } /* * Make a pass over the table to populate the cpus[] and * mem_info[] tables. */ slit = acpi_map_table(slit_physaddr, ACPI_SIG_SLIT); slit_parse_table(slit); acpi_unmap_table(slit); slit = NULL; /* Tell the VM about it! */ mem_locality = vm_locality_table; return (0); } /* * SRAT parsing. */ /* * Returns true if a memory range overlaps with at least one range in * phys_avail[]. */ static int overlaps_phys_avail(vm_paddr_t start, vm_paddr_t end) { int i; for (i = 0; phys_avail[i] != 0 && phys_avail[i + 1] != 0; i += 2) { if (phys_avail[i + 1] < start) continue; if (phys_avail[i] < end) return (1); break; } return (0); } static void srat_parse_entry(ACPI_SUBTABLE_HEADER *entry, void *arg) { ACPI_SRAT_CPU_AFFINITY *cpu; ACPI_SRAT_X2APIC_CPU_AFFINITY *x2apic; ACPI_SRAT_MEM_AFFINITY *mem; int domain, i, slot; switch (entry->Type) { case ACPI_SRAT_TYPE_CPU_AFFINITY: cpu = (ACPI_SRAT_CPU_AFFINITY *)entry; domain = cpu->ProximityDomainLo | cpu->ProximityDomainHi[0] << 8 | cpu->ProximityDomainHi[1] << 16 | cpu->ProximityDomainHi[2] << 24; if (bootverbose) printf("SRAT: Found CPU APIC ID %u domain %d: %s\n", cpu->ApicId, domain, (cpu->Flags & ACPI_SRAT_CPU_ENABLED) ? "enabled" : "disabled"); if (!(cpu->Flags & ACPI_SRAT_CPU_ENABLED)) break; KASSERT(!cpus[cpu->ApicId].enabled, ("Duplicate local APIC ID %u", cpu->ApicId)); cpus[cpu->ApicId].domain = domain; cpus[cpu->ApicId].enabled = 1; break; case ACPI_SRAT_TYPE_X2APIC_CPU_AFFINITY: x2apic = (ACPI_SRAT_X2APIC_CPU_AFFINITY *)entry; if (bootverbose) printf("SRAT: Found CPU APIC ID %u domain %d: %s\n", x2apic->ApicId, x2apic->ProximityDomain, (x2apic->Flags & ACPI_SRAT_CPU_ENABLED) ? "enabled" : "disabled"); if (!(x2apic->Flags & ACPI_SRAT_CPU_ENABLED)) break; KASSERT(!cpus[x2apic->ApicId].enabled, ("Duplicate local APIC ID %u", x2apic->ApicId)); cpus[x2apic->ApicId].domain = x2apic->ProximityDomain; cpus[x2apic->ApicId].enabled = 1; break; case ACPI_SRAT_TYPE_MEMORY_AFFINITY: mem = (ACPI_SRAT_MEM_AFFINITY *)entry; if (bootverbose) printf( "SRAT: Found memory domain %d addr %jx len %jx: %s\n", mem->ProximityDomain, (uintmax_t)mem->BaseAddress, (uintmax_t)mem->Length, (mem->Flags & ACPI_SRAT_MEM_ENABLED) ? "enabled" : "disabled"); if (!(mem->Flags & ACPI_SRAT_MEM_ENABLED)) break; if (!overlaps_phys_avail(mem->BaseAddress, mem->BaseAddress + mem->Length)) { printf("SRAT: Ignoring memory at addr %jx\n", (uintmax_t)mem->BaseAddress); break; } if (num_mem == VM_PHYSSEG_MAX) { printf("SRAT: Too many memory regions\n"); *(int *)arg = ENXIO; break; } slot = num_mem; for (i = 0; i < num_mem; i++) { if (mem_info[i].end <= mem->BaseAddress) continue; if (mem_info[i].start < (mem->BaseAddress + mem->Length)) { printf("SRAT: Overlapping memory entries\n"); *(int *)arg = ENXIO; return; } slot = i; } for (i = num_mem; i > slot; i--) mem_info[i] = mem_info[i - 1]; mem_info[slot].start = mem->BaseAddress; mem_info[slot].end = mem->BaseAddress + mem->Length; mem_info[slot].domain = mem->ProximityDomain; num_mem++; break; } } /* * Ensure each memory domain has at least one CPU and that each CPU * has at least one memory domain. */ static int check_domains(void) { int found, i, j; for (i = 0; i < num_mem; i++) { found = 0; for (j = 0; j <= MAX_APIC_ID; j++) if (cpus[j].enabled && cpus[j].domain == mem_info[i].domain) { cpus[j].has_memory = 1; found++; } if (!found) { printf("SRAT: No CPU found for memory domain %d\n", mem_info[i].domain); return (ENXIO); } } for (i = 0; i <= MAX_APIC_ID; i++) if (cpus[i].enabled && !cpus[i].has_memory) { printf("SRAT: No memory found for CPU %d\n", i); return (ENXIO); } return (0); } /* * Check that the SRAT memory regions cover all of the regions in * phys_avail[]. */ static int check_phys_avail(void) { vm_paddr_t address; int i, j; /* j is the current offset into phys_avail[]. */ address = phys_avail[0]; j = 0; for (i = 0; i < num_mem; i++) { /* * Consume as many phys_avail[] entries as fit in this * region. */ while (address >= mem_info[i].start && address <= mem_info[i].end) { /* * If we cover the rest of this phys_avail[] entry, * advance to the next entry. */ if (phys_avail[j + 1] <= mem_info[i].end) { j += 2; if (phys_avail[j] == 0 && phys_avail[j + 1] == 0) { return (0); } address = phys_avail[j]; } else address = mem_info[i].end + 1; } } printf("SRAT: No memory region found for %jx - %jx\n", (uintmax_t)phys_avail[j], (uintmax_t)phys_avail[j + 1]); return (ENXIO); } /* * Renumber the memory domains to be compact and zero-based if not * already. Returns an error if there are too many domains. */ static int renumber_domains(void) { int i, j, slot; /* Enumerate all the domains. */ vm_ndomains = 0; for (i = 0; i < num_mem; i++) { /* See if this domain is already known. */ for (j = 0; j < vm_ndomains; j++) { if (vm_domains[j] >= mem_info[i].domain) break; } if (j < vm_ndomains && vm_domains[j] == mem_info[i].domain) continue; /* Insert the new domain at slot 'j'. */ slot = j; for (j = vm_ndomains; j > slot; j--) vm_domains[j] = vm_domains[j - 1]; vm_domains[slot] = mem_info[i].domain; vm_ndomains++; if (vm_ndomains > MAXMEMDOM) { vm_ndomains = 1; printf("SRAT: Too many memory domains\n"); return (EFBIG); } } /* Renumber each domain to its index in the sorted 'domains' list. */ for (i = 0; i < vm_ndomains; i++) { /* * If the domain is already the right value, no need * to renumber. */ if (vm_domains[i] == i) continue; /* Walk the cpu[] and mem_info[] arrays to renumber. */ for (j = 0; j < num_mem; j++) if (mem_info[j].domain == vm_domains[i]) mem_info[j].domain = i; for (j = 0; j <= MAX_APIC_ID; j++) if (cpus[j].enabled && cpus[j].domain == vm_domains[i]) cpus[j].domain = i; } KASSERT(vm_ndomains > 0, ("renumber_domains: invalid final vm_ndomains setup")); return (0); } /* * Look for an ACPI System Resource Affinity Table ("SRAT") */ static int parse_srat(void) { int error; if (resource_disabled("srat", 0)) return (-1); srat_physaddr = acpi_find_table(ACPI_SIG_SRAT); if (srat_physaddr == 0) return (-1); /* * Make a pass over the table to populate the cpus[] and * mem_info[] tables. */ srat = acpi_map_table(srat_physaddr, ACPI_SIG_SRAT); error = 0; srat_walk_table(srat_parse_entry, &error); acpi_unmap_table(srat); srat = NULL; if (error || check_domains() != 0 || check_phys_avail() != 0 || renumber_domains() != 0) { srat_physaddr = 0; return (-1); } /* Point vm_phys at our memory affinity table. */ mem_affinity = mem_info; return (0); } static void init_mem_locality(void) { int i; /* * For now, assume 255 == "no locality information for * this pairing. */ for (i = 0; i < MAXMEMDOM * MAXMEMDOM; i++) vm_locality_table[i] = -1; } static void parse_acpi_tables(void *dummy) { if (parse_srat() < 0) return; init_mem_locality(); (void) parse_slit(); } SYSINIT(parse_acpi_tables, SI_SUB_VM - 1, SI_ORDER_FIRST, parse_acpi_tables, NULL); static void srat_walk_table(acpi_subtable_handler *handler, void *arg) { acpi_walk_subtables(srat + 1, (char *)srat + srat->Header.Length, handler, arg); } /* * Setup per-CPU domain IDs. */ static void srat_set_cpus(void *dummy) { struct cpu_info *cpu; struct pcpu *pc; u_int i; if (srat_physaddr == 0) return; for (i = 0; i < MAXCPU; i++) { if (CPU_ABSENT(i)) continue; pc = pcpu_find(i); KASSERT(pc != NULL, ("no pcpu data for CPU %u", i)); cpu = &cpus[pc->pc_apic_id]; if (!cpu->enabled) panic("SRAT: CPU with APIC ID %u is not known", pc->pc_apic_id); pc->pc_domain = cpu->domain; CPU_SET(i, &cpuset_domain[cpu->domain]); if (bootverbose) printf("SRAT: CPU %u has memory domain %d\n", i, cpu->domain); } } SYSINIT(srat_set_cpus, SI_SUB_CPU, SI_ORDER_ANY, srat_set_cpus, NULL); /* * Map a _PXM value to a VM domain ID. * * Returns the domain ID, or -1 if no domain ID was found. */ int acpi_map_pxm_to_vm_domainid(int pxm) { int i; for (i = 0; i < vm_ndomains; i++) { if (vm_domains[i] == pxm) return (i); } return (-1); } #endif /* MAXMEMDOM > 1 */