/*- * SPDX-License-Identifier: BSD-2-Clause * * Copyright 2021 Jessica Clarke * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ /* SiFive FU740 DesignWare PCIe driver */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "pcib_if.h" #include "pci_dw_if.h" #define FUDW_PHYS 2 #define FUDW_LANES_PER_PHY 4 #define FUDW_MGMT_PERST_N 0x0 #define FUDW_MGMT_LTSSM_EN 0x10 #define FUDW_MGMT_HOLD_PHY_RST 0x18 #define FUDW_MGMT_DEVICE_TYPE 0x708 #define FUDW_MGMT_DEVICE_TYPE_RC 0x4 #define FUDW_MGMT_PHY_CR_PARA_REG(_n, _r) \ (0x860 + (_n) * 0x40 + FUDW_MGMT_PHY_CR_PARA_##_r) #define FUDW_MGMT_PHY_CR_PARA_ADDR 0x0 #define FUDW_MGMT_PHY_CR_PARA_READ_EN 0x10 #define FUDW_MGMT_PHY_CR_PARA_READ_DATA 0x18 #define FUDW_MGMT_PHY_CR_PARA_SEL 0x20 #define FUDW_MGMT_PHY_CR_PARA_WRITE_DATA 0x28 #define FUDW_MGMT_PHY_CR_PARA_WRITE_EN 0x30 #define FUDW_MGMT_PHY_CR_PARA_ACK 0x38 #define FUDW_MGMT_PHY_LANE(_n) (0x1008 + (_n) * 0x100) #define FUDW_MGMT_PHY_LANE_CDR_TRACK_EN (1 << 0) #define FUDW_MGMT_PHY_LANE_LOS_THRESH (1 << 5) #define FUDW_MGMT_PHY_LANE_TERM_EN (1 << 9) #define FUDW_MGMT_PHY_LANE_TERM_ACDC (1 << 10) #define FUDW_MGMT_PHY_LANE_EN (1 << 11) #define FUDW_MGMT_PHY_LANE_INIT \ (FUDW_MGMT_PHY_LANE_CDR_TRACK_EN | FUDW_MGMT_PHY_LANE_LOS_THRESH | \ FUDW_MGMT_PHY_LANE_TERM_EN | FUDW_MGMT_PHY_LANE_TERM_ACDC | \ FUDW_MGMT_PHY_LANE_EN) #define FUDW_DBI_PORT_DBG1 0x72c #define FUDW_DBI_PORT_DBG1_LINK_UP (1 << 4) #define FUDW_DBI_PORT_DBG1_LINK_IN_TRAINING (1 << 29) struct fupci_softc { struct pci_dw_softc dw_sc; device_t dev; struct resource *mgmt_res; gpio_pin_t porst_pin; gpio_pin_t pwren_pin; clk_t pcie_aux_clk; hwreset_t pcie_aux_rst; }; #define FUDW_MGMT_READ(_sc, _o) bus_read_4((_sc)->mgmt_res, (_o)) #define FUDW_MGMT_WRITE(_sc, _o, _v) bus_write_4((_sc)->mgmt_res, (_o), (_v)) static struct ofw_compat_data compat_data[] = { { "sifive,fu740-pcie", 1 }, { NULL, 0 }, }; /* Currently unused; included for completeness */ static int __unused fupci_phy_read(struct fupci_softc *sc, int phy, uint32_t reg, uint32_t *val) { unsigned timeout; uint32_t ack; FUDW_MGMT_WRITE(sc, FUDW_MGMT_PHY_CR_PARA_REG(phy, ADDR), reg); FUDW_MGMT_WRITE(sc, FUDW_MGMT_PHY_CR_PARA_REG(phy, READ_EN), 1); timeout = 10; do { ack = FUDW_MGMT_READ(sc, FUDW_MGMT_PHY_CR_PARA_REG(phy, ACK)); if (ack != 0) break; DELAY(10); } while (--timeout > 0); if (timeout == 0) { device_printf(sc->dev, "Timeout waiting for read ACK\n"); return (ETIMEDOUT); } *val = FUDW_MGMT_READ(sc, FUDW_MGMT_PHY_CR_PARA_REG(phy, READ_DATA)); FUDW_MGMT_WRITE(sc, FUDW_MGMT_PHY_CR_PARA_REG(phy, READ_EN), 0); timeout = 10; do { ack = FUDW_MGMT_READ(sc, FUDW_MGMT_PHY_CR_PARA_REG(phy, ACK)); if (ack == 0) break; DELAY(10); } while (--timeout > 0); if (timeout == 0) { device_printf(sc->dev, "Timeout waiting for read un-ACK\n"); return (ETIMEDOUT); } return (0); } static int fupci_phy_write(struct fupci_softc *sc, int phy, uint32_t reg, uint32_t val) { unsigned timeout; uint32_t ack; FUDW_MGMT_WRITE(sc, FUDW_MGMT_PHY_CR_PARA_REG(phy, ADDR), reg); FUDW_MGMT_WRITE(sc, FUDW_MGMT_PHY_CR_PARA_REG(phy, WRITE_DATA), val); FUDW_MGMT_WRITE(sc, FUDW_MGMT_PHY_CR_PARA_REG(phy, WRITE_EN), 1); timeout = 10; do { ack = FUDW_MGMT_READ(sc, FUDW_MGMT_PHY_CR_PARA_REG(phy, ACK)); if (ack != 0) break; DELAY(10); } while (--timeout > 0); if (timeout == 0) { device_printf(sc->dev, "Timeout waiting for write ACK\n"); return (ETIMEDOUT); } FUDW_MGMT_WRITE(sc, FUDW_MGMT_PHY_CR_PARA_REG(phy, WRITE_EN), 0); timeout = 10; do { ack = FUDW_MGMT_READ(sc, FUDW_MGMT_PHY_CR_PARA_REG(phy, ACK)); if (ack == 0) break; DELAY(10); } while (--timeout > 0); if (timeout == 0) { device_printf(sc->dev, "Timeout waiting for write un-ACK\n"); return (ETIMEDOUT); } return (0); } static int fupci_phy_init(struct fupci_softc *sc) { device_t dev; int error, phy, lane; dev = sc->dev; /* Assert core power-on reset (active low) */ error = gpio_pin_set_active(sc->porst_pin, false); if (error != 0) { device_printf(dev, "Cannot assert power-on reset: %d\n", error); return (error); } /* Assert PERST_N */ FUDW_MGMT_WRITE(sc, FUDW_MGMT_PERST_N, 0); /* Enable power */ error = gpio_pin_set_active(sc->pwren_pin, true); if (error != 0) { device_printf(dev, "Cannot enable power: %d\n", error); return (error); } /* Hold PERST for 100ms as per the PCIe spec */ DELAY(100); /* Deassert PERST_N */ FUDW_MGMT_WRITE(sc, FUDW_MGMT_PERST_N, 1); /* Deassert core power-on reset (active low) */ error = gpio_pin_set_active(sc->porst_pin, true); if (error != 0) { device_printf(dev, "Cannot deassert power-on reset: %d\n", error); return (error); } /* Enable the aux clock */ error = clk_enable(sc->pcie_aux_clk); if (error != 0) { device_printf(dev, "Cannot enable aux clock: %d\n", error); return (error); } /* Hold LTSSM in reset whilst initialising the PHYs */ FUDW_MGMT_WRITE(sc, FUDW_MGMT_HOLD_PHY_RST, 1); /* Deassert the aux reset */ error = hwreset_deassert(sc->pcie_aux_rst); if (error != 0) { device_printf(dev, "Cannot deassert aux reset: %d\n", error); return (error); } /* Enable control register interface */ for (phy = 0; phy < FUDW_PHYS; ++phy) FUDW_MGMT_WRITE(sc, FUDW_MGMT_PHY_CR_PARA_REG(phy, SEL), 1); /* Wait for enable to take effect */ DELAY(1); /* Initialise lane configuration */ for (phy = 0; phy < FUDW_PHYS; ++phy) { for (lane = 0; lane < FUDW_LANES_PER_PHY; ++lane) fupci_phy_write(sc, phy, FUDW_MGMT_PHY_LANE(lane), FUDW_MGMT_PHY_LANE_INIT); } /* Disable the aux clock whilst taking the LTSSM out of reset */ error = clk_disable(sc->pcie_aux_clk); if (error != 0) { device_printf(dev, "Cannot disable aux clock: %d\n", error); return (error); } /* Take LTSSM out of reset */ FUDW_MGMT_WRITE(sc, FUDW_MGMT_HOLD_PHY_RST, 0); /* Enable the aux clock again */ error = clk_enable(sc->pcie_aux_clk); if (error != 0) { device_printf(dev, "Cannot re-enable aux clock: %d\n", error); return (error); } /* Put the controller in Root Complex mode */ FUDW_MGMT_WRITE(sc, FUDW_MGMT_DEVICE_TYPE, FUDW_MGMT_DEVICE_TYPE_RC); return (0); } static void fupci_dbi_protect(struct fupci_softc *sc, bool protect) { uint32_t reg; reg = pci_dw_dbi_rd4(sc->dev, DW_MISC_CONTROL_1); if (protect) reg &= ~DBI_RO_WR_EN; else reg |= DBI_RO_WR_EN; pci_dw_dbi_wr4(sc->dev, DW_MISC_CONTROL_1, reg); } static int fupci_init(struct fupci_softc *sc) { /* Enable 32-bit I/O window */ fupci_dbi_protect(sc, false); pci_dw_dbi_wr2(sc->dev, PCIR_IOBASEL_1, (PCIM_BRIO_32 << 8) | PCIM_BRIO_32); fupci_dbi_protect(sc, true); /* Enable LTSSM */ FUDW_MGMT_WRITE(sc, FUDW_MGMT_LTSSM_EN, 1); return (0); } static int fupci_probe(device_t dev) { if (!ofw_bus_status_okay(dev)) return (ENXIO); if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0) return (ENXIO); device_set_desc(dev, "SiFive FU740 PCIe Controller"); return (BUS_PROBE_DEFAULT); } static int fupci_attach(device_t dev) { struct fupci_softc *sc; phandle_t node; int error, rid; sc = device_get_softc(dev); node = ofw_bus_get_node(dev); sc->dev = dev; rid = 0; error = ofw_bus_find_string_index(node, "reg-names", "dbi", &rid); if (error != 0) { device_printf(dev, "Cannot get DBI memory: %d\n", error); goto fail; } sc->dw_sc.dbi_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, RF_ACTIVE); if (sc->dw_sc.dbi_res == NULL) { device_printf(dev, "Cannot allocate DBI memory\n"); error = ENXIO; goto fail; } rid = 0; error = ofw_bus_find_string_index(node, "reg-names", "mgmt", &rid); if (error != 0) { device_printf(dev, "Cannot get management space memory: %d\n", error); goto fail; } sc->mgmt_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, RF_ACTIVE); if (sc->mgmt_res == NULL) { device_printf(dev, "Cannot allocate management space memory\n"); error = ENXIO; goto fail; } error = gpio_pin_get_by_ofw_property(dev, node, "reset-gpios", &sc->porst_pin); /* Old U-Boot device tree uses perstn-gpios */ if (error == ENOENT) error = gpio_pin_get_by_ofw_property(dev, node, "perstn-gpios", &sc->porst_pin); if (error != 0) { device_printf(dev, "Cannot get power-on reset GPIO: %d\n", error); goto fail; } error = gpio_pin_setflags(sc->porst_pin, GPIO_PIN_OUTPUT); if (error != 0) { device_printf(dev, "Cannot configure power-on reset GPIO: %d\n", error); goto fail; } error = gpio_pin_get_by_ofw_property(dev, node, "pwren-gpios", &sc->pwren_pin); if (error != 0) { device_printf(dev, "Cannot get power enable GPIO: %d\n", error); goto fail; } error = gpio_pin_setflags(sc->pwren_pin, GPIO_PIN_OUTPUT); if (error != 0) { device_printf(dev, "Cannot configure power enable GPIO: %d\n", error); goto fail; } error = clk_get_by_ofw_name(dev, node, "pcie_aux", &sc->pcie_aux_clk); /* Old U-Boot device tree uses pcieaux */ if (error == ENOENT) error = clk_get_by_ofw_name(dev, node, "pcieaux", &sc->pcie_aux_clk); if (error != 0) { device_printf(dev, "Cannot get aux clock: %d\n", error); goto fail; } error = hwreset_get_by_ofw_idx(dev, node, 0, &sc->pcie_aux_rst); if (error != 0) { device_printf(dev, "Cannot get aux reset: %d\n", error); goto fail; } error = fupci_phy_init(sc); if (error != 0) goto fail; error = pci_dw_init(dev); if (error != 0) goto fail; error = fupci_init(sc); if (error != 0) goto fail; return (bus_generic_attach(dev)); fail: /* XXX Cleanup */ return (error); } static int fupci_get_link(device_t dev, bool *status) { uint32_t reg; reg = pci_dw_dbi_rd4(dev, FUDW_DBI_PORT_DBG1); *status = (reg & FUDW_DBI_PORT_DBG1_LINK_UP) != 0 && (reg & FUDW_DBI_PORT_DBG1_LINK_IN_TRAINING) == 0; return (0); } static device_method_t fupci_methods[] = { /* Device interface */ DEVMETHOD(device_probe, fupci_probe), DEVMETHOD(device_attach, fupci_attach), /* PCI DW interface */ DEVMETHOD(pci_dw_get_link, fupci_get_link), DEVMETHOD_END }; DEFINE_CLASS_1(pcib, fupci_driver, fupci_methods, sizeof(struct fupci_softc), pci_dw_driver); DRIVER_MODULE(fu740_pci_dw, simplebus, fupci_driver, NULL, NULL);