/*- * SPDX-License-Identifier: BSD-2-Clause OR GPL-2.0 * * Copyright (c) 2005 Voltaire Inc. All rights reserved. * Copyright (c) 2005 Intel Corporation. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU * General Public License (GPL) Version 2, available from the file * COPYING in the main directory of this source tree, or the * OpenIB.org BSD license below: * * Redistribution and use in source and binary forms, with or * without modification, are permitted provided that the following * conditions are met: * * - Redistributions of source code must retain the above * copyright notice, this list of conditions and the following * disclaimer. * * - Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the following * disclaimer in the documentation and/or other materials * provided with the distribution. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #if !defined(RDMA_CM_H) #define RDMA_CM_H #include #include #include #include /* * Upon receiving a device removal event, users must destroy the associated * RDMA identifier and release all resources allocated with the device. */ enum rdma_cm_event_type { RDMA_CM_EVENT_ADDR_RESOLVED, RDMA_CM_EVENT_ADDR_ERROR, RDMA_CM_EVENT_ROUTE_RESOLVED, RDMA_CM_EVENT_ROUTE_ERROR, RDMA_CM_EVENT_CONNECT_REQUEST, RDMA_CM_EVENT_CONNECT_RESPONSE, RDMA_CM_EVENT_CONNECT_ERROR, RDMA_CM_EVENT_UNREACHABLE, RDMA_CM_EVENT_REJECTED, RDMA_CM_EVENT_ESTABLISHED, RDMA_CM_EVENT_DISCONNECTED, RDMA_CM_EVENT_DEVICE_REMOVAL, RDMA_CM_EVENT_MULTICAST_JOIN, RDMA_CM_EVENT_MULTICAST_ERROR, RDMA_CM_EVENT_ADDR_CHANGE, RDMA_CM_EVENT_TIMEWAIT_EXIT }; const char *__attribute_const__ rdma_event_msg(enum rdma_cm_event_type event); enum rdma_port_space { RDMA_PS_SDP = 0x0001, RDMA_PS_IPOIB = 0x0002, RDMA_PS_IB = 0x013F, RDMA_PS_TCP = 0x0106, RDMA_PS_UDP = 0x0111, }; #define RDMA_IB_IP_PS_MASK 0xFFFFFFFFFFFF0000ULL #define RDMA_IB_IP_PS_TCP 0x0000000001060000ULL #define RDMA_IB_IP_PS_UDP 0x0000000001110000ULL #define RDMA_IB_IP_PS_IB 0x00000000013F0000ULL struct rdma_addr { struct sockaddr_storage src_addr; struct sockaddr_storage dst_addr; struct rdma_dev_addr dev_addr; }; struct rdma_route { struct rdma_addr addr; struct ib_sa_path_rec *path_rec; int num_paths; }; struct rdma_conn_param { const void *private_data; u8 private_data_len; u8 responder_resources; u8 initiator_depth; u8 flow_control; u8 retry_count; /* ignored when accepting */ u8 rnr_retry_count; /* Fields below ignored if a QP is created on the rdma_cm_id. */ u8 srq; u32 qp_num; u32 qkey; }; struct rdma_ud_param { const void *private_data; u8 private_data_len; struct ib_ah_attr ah_attr; u32 qp_num; u32 qkey; }; struct rdma_cm_event { enum rdma_cm_event_type event; int status; union { struct rdma_conn_param conn; struct rdma_ud_param ud; } param; }; enum rdma_cm_state { RDMA_CM_IDLE, RDMA_CM_ADDR_QUERY, RDMA_CM_ADDR_RESOLVED, RDMA_CM_ROUTE_QUERY, RDMA_CM_ROUTE_RESOLVED, RDMA_CM_CONNECT, RDMA_CM_DISCONNECT, RDMA_CM_ADDR_BOUND, RDMA_CM_LISTEN, RDMA_CM_DEVICE_REMOVAL, RDMA_CM_DESTROYING }; struct rdma_cm_id; /** * rdma_cm_event_handler - Callback used to report user events. * * Notes: Users may not call rdma_destroy_id from this callback to destroy * the passed in id, or a corresponding listen id. Returning a * non-zero value from the callback will destroy the passed in id. */ typedef int (*rdma_cm_event_handler)(struct rdma_cm_id *id, struct rdma_cm_event *event); struct rdma_cm_id { struct ib_device *device; void *context; struct ib_qp *qp; rdma_cm_event_handler event_handler; struct rdma_route route; enum rdma_port_space ps; enum ib_qp_type qp_type; u8 port_num; }; /** * rdma_create_id - Create an RDMA identifier. * * @net: The network namespace in which to create the new id. * @event_handler: User callback invoked to report events associated with the * returned rdma_id. * @context: User specified context associated with the id. * @ps: RDMA port space. * @qp_type: type of queue pair associated with the id. * * The id holds a reference on the network namespace until it is destroyed. */ struct rdma_cm_id *rdma_create_id(struct vnet *net, rdma_cm_event_handler event_handler, void *context, enum rdma_port_space ps, enum ib_qp_type qp_type); /** * rdma_destroy_id - Destroys an RDMA identifier. * * @id: RDMA identifier. * * Note: calling this function has the effect of canceling in-flight * asynchronous operations associated with the id. */ void rdma_destroy_id(struct rdma_cm_id *id); /** * rdma_bind_addr - Bind an RDMA identifier to a source address and * associated RDMA device, if needed. * * @id: RDMA identifier. * @addr: Local address information. Wildcard values are permitted. * * This associates a source address with the RDMA identifier before calling * rdma_listen. If a specific local address is given, the RDMA identifier will * be bound to a local RDMA device. */ int rdma_bind_addr(struct rdma_cm_id *id, struct sockaddr *addr); /** * rdma_resolve_addr - Resolve destination and optional source addresses * from IP addresses to an RDMA address. If successful, the specified * rdma_cm_id will be bound to a local device. * * @id: RDMA identifier. * @src_addr: Source address information. This parameter may be NULL. * @dst_addr: Destination address information. * @timeout_ms: Time to wait for resolution to complete. */ int rdma_resolve_addr(struct rdma_cm_id *id, struct sockaddr *src_addr, struct sockaddr *dst_addr, int timeout_ms); /** * rdma_resolve_route - Resolve the RDMA address bound to the RDMA identifier * into route information needed to establish a connection. * * This is called on the client side of a connection. * Users must have first called rdma_resolve_addr to resolve a dst_addr * into an RDMA address before calling this routine. */ int rdma_resolve_route(struct rdma_cm_id *id, int timeout_ms); /** * rdma_create_qp - Allocate a QP and associate it with the specified RDMA * identifier. * * QPs allocated to an rdma_cm_id will automatically be transitioned by the CMA * through their states. */ int rdma_create_qp(struct rdma_cm_id *id, struct ib_pd *pd, struct ib_qp_init_attr *qp_init_attr); /** * rdma_destroy_qp - Deallocate the QP associated with the specified RDMA * identifier. * * Users must destroy any QP associated with an RDMA identifier before * destroying the RDMA ID. */ void rdma_destroy_qp(struct rdma_cm_id *id); /** * rdma_init_qp_attr - Initializes the QP attributes for use in transitioning * to a specified QP state. * @id: Communication identifier associated with the QP attributes to * initialize. * @qp_attr: On input, specifies the desired QP state. On output, the * mandatory and desired optional attributes will be set in order to * modify the QP to the specified state. * @qp_attr_mask: The QP attribute mask that may be used to transition the * QP to the specified state. * * Users must set the @qp_attr->qp_state to the desired QP state. This call * will set all required attributes for the given transition, along with * known optional attributes. Users may override the attributes returned from * this call before calling ib_modify_qp. * * Users that wish to have their QP automatically transitioned through its * states can associate a QP with the rdma_cm_id by calling rdma_create_qp(). */ int rdma_init_qp_attr(struct rdma_cm_id *id, struct ib_qp_attr *qp_attr, int *qp_attr_mask); /** * rdma_connect - Initiate an active connection request. * @id: Connection identifier to connect. * @conn_param: Connection information used for connected QPs. * * Users must have resolved a route for the rdma_cm_id to connect with * by having called rdma_resolve_route before calling this routine. * * This call will either connect to a remote QP or obtain remote QP * information for unconnected rdma_cm_id's. The actual operation is * based on the rdma_cm_id's port space. */ int rdma_connect(struct rdma_cm_id *id, struct rdma_conn_param *conn_param); /** * rdma_listen - This function is called by the passive side to * listen for incoming connection requests. * * Users must have bound the rdma_cm_id to a local address by calling * rdma_bind_addr before calling this routine. */ int rdma_listen(struct rdma_cm_id *id, int backlog); /** * rdma_accept - Called to accept a connection request or response. * @id: Connection identifier associated with the request. * @conn_param: Information needed to establish the connection. This must be * provided if accepting a connection request. If accepting a connection * response, this parameter must be NULL. * * Typically, this routine is only called by the listener to accept a connection * request. It must also be called on the active side of a connection if the * user is performing their own QP transitions. * * In the case of error, a reject message is sent to the remote side and the * state of the qp associated with the id is modified to error, such that any * previously posted receive buffers would be flushed. */ int rdma_accept(struct rdma_cm_id *id, struct rdma_conn_param *conn_param); /** * rdma_notify - Notifies the RDMA CM of an asynchronous event that has * occurred on the connection. * @id: Connection identifier to transition to established. * @event: Asynchronous event. * * This routine should be invoked by users to notify the CM of relevant * communication events. Events that should be reported to the CM and * when to report them are: * * IB_EVENT_COMM_EST - Used when a message is received on a connected * QP before an RTU has been received. */ int rdma_notify(struct rdma_cm_id *id, enum ib_event_type event); /** * rdma_reject - Called to reject a connection request or response. */ int rdma_reject(struct rdma_cm_id *id, const void *private_data, u8 private_data_len); /** * rdma_disconnect - This function disconnects the associated QP and * transitions it into the error state. */ int rdma_disconnect(struct rdma_cm_id *id); /** * rdma_join_multicast - Join the multicast group specified by the given * address. * @id: Communication identifier associated with the request. * @addr: Multicast address identifying the group to join. * @join_state: Multicast JoinState bitmap requested by port. * Bitmap is based on IB_SA_MCMEMBER_REC_JOIN_STATE bits. * @context: User-defined context associated with the join request, returned * to the user through the private_data pointer in multicast events. */ int rdma_join_multicast(struct rdma_cm_id *id, struct sockaddr *addr, u8 join_state, void *context); /** * rdma_leave_multicast - Leave the multicast group specified by the given * address. */ void rdma_leave_multicast(struct rdma_cm_id *id, struct sockaddr *addr); /** * rdma_set_service_type - Set the type of service associated with a * connection identifier. * @id: Communication identifier to associated with service type. * @tos: Type of service. * * The type of service is interpretted as a differentiated service * field (RFC 2474). The service type should be specified before * performing route resolution, as existing communication on the * connection identifier may be unaffected. The type of service * requested may not be supported by the network to all destinations. */ void rdma_set_service_type(struct rdma_cm_id *id, int tos); /** * rdma_set_reuseaddr - Allow the reuse of local addresses when binding * the rdma_cm_id. * @id: Communication identifier to configure. * @reuse: Value indicating if the bound address is reusable. * * Reuse must be set before an address is bound to the id. */ int rdma_set_reuseaddr(struct rdma_cm_id *id, int reuse); /** * rdma_set_afonly - Specify that listens are restricted to the * bound address family only. * @id: Communication identifer to configure. * @afonly: Value indicating if listens are restricted. * * Must be set before identifier is in the listening state. */ int rdma_set_afonly(struct rdma_cm_id *id, int afonly); /** * rdma_get_service_id - Return the IB service ID for a specified address. * @id: Communication identifier associated with the address. * @addr: Address for the service ID. */ __be64 rdma_get_service_id(struct rdma_cm_id *id, struct sockaddr *addr); #endif /* RDMA_CM_H */