/*- * Copyright (c) 1982, 1986, 1988, 1990, 1993, 1995 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)tcp_output.c 8.4 (Berkeley) 5/24/95 */ #include __FBSDID("$FreeBSD$"); #include "opt_inet.h" #include "opt_inet6.h" #include "opt_ipsec.h" #include "opt_tcpdebug.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef INET6 #include #include #include #endif #define TCPOUTFLAGS #include #include #include #include #include #ifdef TCPDEBUG #include #endif #ifdef TCP_OFFLOAD #include #endif #ifdef IPSEC #include #endif /*IPSEC*/ #include #include VNET_DEFINE(int, path_mtu_discovery) = 1; SYSCTL_VNET_INT(_net_inet_tcp, OID_AUTO, path_mtu_discovery, CTLFLAG_RW, &VNET_NAME(path_mtu_discovery), 1, "Enable Path MTU Discovery"); VNET_DEFINE(int, tcp_do_tso) = 1; #define V_tcp_do_tso VNET(tcp_do_tso) SYSCTL_VNET_INT(_net_inet_tcp, OID_AUTO, tso, CTLFLAG_RW, &VNET_NAME(tcp_do_tso), 0, "Enable TCP Segmentation Offload"); VNET_DEFINE(int, tcp_sendspace) = 1024*32; #define V_tcp_sendspace VNET(tcp_sendspace) SYSCTL_VNET_INT(_net_inet_tcp, TCPCTL_SENDSPACE, sendspace, CTLFLAG_RW, &VNET_NAME(tcp_sendspace), 0, "Initial send socket buffer size"); VNET_DEFINE(int, tcp_do_autosndbuf) = 1; #define V_tcp_do_autosndbuf VNET(tcp_do_autosndbuf) SYSCTL_VNET_INT(_net_inet_tcp, OID_AUTO, sendbuf_auto, CTLFLAG_RW, &VNET_NAME(tcp_do_autosndbuf), 0, "Enable automatic send buffer sizing"); VNET_DEFINE(int, tcp_autosndbuf_inc) = 8*1024; #define V_tcp_autosndbuf_inc VNET(tcp_autosndbuf_inc) SYSCTL_VNET_INT(_net_inet_tcp, OID_AUTO, sendbuf_inc, CTLFLAG_RW, &VNET_NAME(tcp_autosndbuf_inc), 0, "Incrementor step size of automatic send buffer"); VNET_DEFINE(int, tcp_autosndbuf_max) = 2*1024*1024; #define V_tcp_autosndbuf_max VNET(tcp_autosndbuf_max) SYSCTL_VNET_INT(_net_inet_tcp, OID_AUTO, sendbuf_max, CTLFLAG_RW, &VNET_NAME(tcp_autosndbuf_max), 0, "Max size of automatic send buffer"); static void inline hhook_run_tcp_est_out(struct tcpcb *tp, struct tcphdr *th, struct tcpopt *to, long len, int tso); static void inline cc_after_idle(struct tcpcb *tp); /* * Wrapper for the TCP established output helper hook. */ static void inline hhook_run_tcp_est_out(struct tcpcb *tp, struct tcphdr *th, struct tcpopt *to, long len, int tso) { struct tcp_hhook_data hhook_data; if (V_tcp_hhh[HHOOK_TCP_EST_OUT]->hhh_nhooks > 0) { hhook_data.tp = tp; hhook_data.th = th; hhook_data.to = to; hhook_data.len = len; hhook_data.tso = tso; hhook_run_hooks(V_tcp_hhh[HHOOK_TCP_EST_OUT], &hhook_data, tp->osd); } } /* * CC wrapper hook functions */ static void inline cc_after_idle(struct tcpcb *tp) { INP_WLOCK_ASSERT(tp->t_inpcb); if (CC_ALGO(tp)->after_idle != NULL) CC_ALGO(tp)->after_idle(tp->ccv); } /* * Tcp output routine: figure out what should be sent and send it. */ int tcp_output(struct tcpcb *tp) { struct socket *so = tp->t_inpcb->inp_socket; long len, recwin, sendwin; int off, flags, error = 0; /* Keep compiler happy */ struct mbuf *m; struct ip *ip = NULL; struct ipovly *ipov = NULL; struct tcphdr *th; u_char opt[TCP_MAXOLEN]; unsigned ipoptlen, optlen, hdrlen; #ifdef IPSEC unsigned ipsec_optlen = 0; #endif int idle, sendalot; int sack_rxmit, sack_bytes_rxmt; struct sackhole *p; int tso, mtu; struct tcpopt to; #if 0 int maxburst = TCP_MAXBURST; #endif #ifdef INET6 struct ip6_hdr *ip6 = NULL; int isipv6; isipv6 = (tp->t_inpcb->inp_vflag & INP_IPV6) != 0; #endif INP_WLOCK_ASSERT(tp->t_inpcb); #ifdef TCP_OFFLOAD if (tp->t_flags & TF_TOE) return (tcp_offload_output(tp)); #endif /* * Determine length of data that should be transmitted, * and flags that will be used. * If there is some data or critical controls (SYN, RST) * to send, then transmit; otherwise, investigate further. */ idle = (tp->t_flags & TF_LASTIDLE) || (tp->snd_max == tp->snd_una); if (idle && ticks - tp->t_rcvtime >= tp->t_rxtcur) cc_after_idle(tp); tp->t_flags &= ~TF_LASTIDLE; if (idle) { if (tp->t_flags & TF_MORETOCOME) { tp->t_flags |= TF_LASTIDLE; idle = 0; } } again: /* * If we've recently taken a timeout, snd_max will be greater than * snd_nxt. There may be SACK information that allows us to avoid * resending already delivered data. Adjust snd_nxt accordingly. */ if ((tp->t_flags & TF_SACK_PERMIT) && SEQ_LT(tp->snd_nxt, tp->snd_max)) tcp_sack_adjust(tp); sendalot = 0; tso = 0; mtu = 0; off = tp->snd_nxt - tp->snd_una; sendwin = min(tp->snd_wnd, tp->snd_cwnd); flags = tcp_outflags[tp->t_state]; /* * Send any SACK-generated retransmissions. If we're explicitly trying * to send out new data (when sendalot is 1), bypass this function. * If we retransmit in fast recovery mode, decrement snd_cwnd, since * we're replacing a (future) new transmission with a retransmission * now, and we previously incremented snd_cwnd in tcp_input(). */ /* * Still in sack recovery , reset rxmit flag to zero. */ sack_rxmit = 0; sack_bytes_rxmt = 0; len = 0; p = NULL; if ((tp->t_flags & TF_SACK_PERMIT) && IN_FASTRECOVERY(tp->t_flags) && (p = tcp_sack_output(tp, &sack_bytes_rxmt))) { long cwin; cwin = min(tp->snd_wnd, tp->snd_cwnd) - sack_bytes_rxmt; if (cwin < 0) cwin = 0; /* Do not retransmit SACK segments beyond snd_recover */ if (SEQ_GT(p->end, tp->snd_recover)) { /* * (At least) part of sack hole extends beyond * snd_recover. Check to see if we can rexmit data * for this hole. */ if (SEQ_GEQ(p->rxmit, tp->snd_recover)) { /* * Can't rexmit any more data for this hole. * That data will be rexmitted in the next * sack recovery episode, when snd_recover * moves past p->rxmit. */ p = NULL; goto after_sack_rexmit; } else /* Can rexmit part of the current hole */ len = ((long)ulmin(cwin, tp->snd_recover - p->rxmit)); } else len = ((long)ulmin(cwin, p->end - p->rxmit)); off = p->rxmit - tp->snd_una; KASSERT(off >= 0,("%s: sack block to the left of una : %d", __func__, off)); if (len > 0) { sack_rxmit = 1; sendalot = 1; TCPSTAT_INC(tcps_sack_rexmits); TCPSTAT_ADD(tcps_sack_rexmit_bytes, min(len, tp->t_maxseg)); } } after_sack_rexmit: /* * Get standard flags, and add SYN or FIN if requested by 'hidden' * state flags. */ if (tp->t_flags & TF_NEEDFIN) flags |= TH_FIN; if (tp->t_flags & TF_NEEDSYN) flags |= TH_SYN; SOCKBUF_LOCK(&so->so_snd); /* * If in persist timeout with window of 0, send 1 byte. * Otherwise, if window is small but nonzero * and timer expired, we will send what we can * and go to transmit state. */ if (tp->t_flags & TF_FORCEDATA) { if (sendwin == 0) { /* * If we still have some data to send, then * clear the FIN bit. Usually this would * happen below when it realizes that we * aren't sending all the data. However, * if we have exactly 1 byte of unsent data, * then it won't clear the FIN bit below, * and if we are in persist state, we wind * up sending the packet without recording * that we sent the FIN bit. * * We can't just blindly clear the FIN bit, * because if we don't have any more data * to send then the probe will be the FIN * itself. */ if (off < so->so_snd.sb_cc) flags &= ~TH_FIN; sendwin = 1; } else { tcp_timer_activate(tp, TT_PERSIST, 0); tp->t_rxtshift = 0; } } /* * If snd_nxt == snd_max and we have transmitted a FIN, the * offset will be > 0 even if so_snd.sb_cc is 0, resulting in * a negative length. This can also occur when TCP opens up * its congestion window while receiving additional duplicate * acks after fast-retransmit because TCP will reset snd_nxt * to snd_max after the fast-retransmit. * * In the normal retransmit-FIN-only case, however, snd_nxt will * be set to snd_una, the offset will be 0, and the length may * wind up 0. * * If sack_rxmit is true we are retransmitting from the scoreboard * in which case len is already set. */ if (sack_rxmit == 0) { if (sack_bytes_rxmt == 0) len = ((long)ulmin(so->so_snd.sb_cc, sendwin) - off); else { long cwin; /* * We are inside of a SACK recovery episode and are * sending new data, having retransmitted all the * data possible in the scoreboard. */ len = ((long)ulmin(so->so_snd.sb_cc, tp->snd_wnd) - off); /* * Don't remove this (len > 0) check ! * We explicitly check for len > 0 here (although it * isn't really necessary), to work around a gcc * optimization issue - to force gcc to compute * len above. Without this check, the computation * of len is bungled by the optimizer. */ if (len > 0) { cwin = tp->snd_cwnd - (tp->snd_nxt - tp->sack_newdata) - sack_bytes_rxmt; if (cwin < 0) cwin = 0; len = lmin(len, cwin); } } } /* * Lop off SYN bit if it has already been sent. However, if this * is SYN-SENT state and if segment contains data and if we don't * know that foreign host supports TAO, suppress sending segment. */ if ((flags & TH_SYN) && SEQ_GT(tp->snd_nxt, tp->snd_una)) { if (tp->t_state != TCPS_SYN_RECEIVED) flags &= ~TH_SYN; off--, len++; } /* * Be careful not to send data and/or FIN on SYN segments. * This measure is needed to prevent interoperability problems * with not fully conformant TCP implementations. */ if ((flags & TH_SYN) && (tp->t_flags & TF_NOOPT)) { len = 0; flags &= ~TH_FIN; } if (len < 0) { /* * If FIN has been sent but not acked, * but we haven't been called to retransmit, * len will be < 0. Otherwise, window shrank * after we sent into it. If window shrank to 0, * cancel pending retransmit, pull snd_nxt back * to (closed) window, and set the persist timer * if it isn't already going. If the window didn't * close completely, just wait for an ACK. */ len = 0; if (sendwin == 0) { tcp_timer_activate(tp, TT_REXMT, 0); tp->t_rxtshift = 0; tp->snd_nxt = tp->snd_una; if (!tcp_timer_active(tp, TT_PERSIST)) tcp_setpersist(tp); } } /* len will be >= 0 after this point. */ KASSERT(len >= 0, ("[%s:%d]: len < 0", __func__, __LINE__)); /* * Automatic sizing of send socket buffer. Often the send buffer * size is not optimally adjusted to the actual network conditions * at hand (delay bandwidth product). Setting the buffer size too * small limits throughput on links with high bandwidth and high * delay (eg. trans-continental/oceanic links). Setting the * buffer size too big consumes too much real kernel memory, * especially with many connections on busy servers. * * The criteria to step up the send buffer one notch are: * 1. receive window of remote host is larger than send buffer * (with a fudge factor of 5/4th); * 2. send buffer is filled to 7/8th with data (so we actually * have data to make use of it); * 3. send buffer fill has not hit maximal automatic size; * 4. our send window (slow start and cogestion controlled) is * larger than sent but unacknowledged data in send buffer. * * The remote host receive window scaling factor may limit the * growing of the send buffer before it reaches its allowed * maximum. * * It scales directly with slow start or congestion window * and does at most one step per received ACK. This fast * scaling has the drawback of growing the send buffer beyond * what is strictly necessary to make full use of a given * delay*bandwith product. However testing has shown this not * to be much of an problem. At worst we are trading wasting * of available bandwith (the non-use of it) for wasting some * socket buffer memory. * * TODO: Shrink send buffer during idle periods together * with congestion window. Requires another timer. Has to * wait for upcoming tcp timer rewrite. */ if (V_tcp_do_autosndbuf && so->so_snd.sb_flags & SB_AUTOSIZE) { if ((tp->snd_wnd / 4 * 5) >= so->so_snd.sb_hiwat && so->so_snd.sb_cc >= (so->so_snd.sb_hiwat / 8 * 7) && so->so_snd.sb_cc < V_tcp_autosndbuf_max && sendwin >= (so->so_snd.sb_cc - (tp->snd_nxt - tp->snd_una))) { if (!sbreserve_locked(&so->so_snd, min(so->so_snd.sb_hiwat + V_tcp_autosndbuf_inc, V_tcp_autosndbuf_max), so, curthread)) so->so_snd.sb_flags &= ~SB_AUTOSIZE; } } /* * Decide if we can use TCP Segmentation Offloading (if supported by * hardware). * * TSO may only be used if we are in a pure bulk sending state. The * presence of TCP-MD5, SACK retransmits, SACK advertizements and * IP options prevent using TSO. With TSO the TCP header is the same * (except for the sequence number) for all generated packets. This * makes it impossible to transmit any options which vary per generated * segment or packet. */ #ifdef IPSEC /* * Pre-calculate here as we save another lookup into the darknesses * of IPsec that way and can actually decide if TSO is ok. */ ipsec_optlen = ipsec_hdrsiz_tcp(tp); #endif if ((tp->t_flags & TF_TSO) && V_tcp_do_tso && len > tp->t_maxseg && ((tp->t_flags & TF_SIGNATURE) == 0) && tp->rcv_numsacks == 0 && sack_rxmit == 0 && #ifdef IPSEC ipsec_optlen == 0 && #endif tp->t_inpcb->inp_options == NULL && tp->t_inpcb->in6p_options == NULL) tso = 1; if (sack_rxmit) { if (SEQ_LT(p->rxmit + len, tp->snd_una + so->so_snd.sb_cc)) flags &= ~TH_FIN; } else { if (SEQ_LT(tp->snd_nxt + len, tp->snd_una + so->so_snd.sb_cc)) flags &= ~TH_FIN; } recwin = sbspace(&so->so_rcv); /* * Sender silly window avoidance. We transmit under the following * conditions when len is non-zero: * * - We have a full segment (or more with TSO) * - This is the last buffer in a write()/send() and we are * either idle or running NODELAY * - we've timed out (e.g. persist timer) * - we have more then 1/2 the maximum send window's worth of * data (receiver may be limited the window size) * - we need to retransmit */ if (len) { if (len >= tp->t_maxseg) goto send; /* * NOTE! on localhost connections an 'ack' from the remote * end may occur synchronously with the output and cause * us to flush a buffer queued with moretocome. XXX * * note: the len + off check is almost certainly unnecessary. */ if (!(tp->t_flags & TF_MORETOCOME) && /* normal case */ (idle || (tp->t_flags & TF_NODELAY)) && len + off >= so->so_snd.sb_cc && (tp->t_flags & TF_NOPUSH) == 0) { goto send; } if (tp->t_flags & TF_FORCEDATA) /* typ. timeout case */ goto send; if (len >= tp->max_sndwnd / 2 && tp->max_sndwnd > 0) goto send; if (SEQ_LT(tp->snd_nxt, tp->snd_max)) /* retransmit case */ goto send; if (sack_rxmit) goto send; } /* * Sending of standalone window updates. * * Window updates are important when we close our window due to a * full socket buffer and are opening it again after the application * reads data from it. Once the window has opened again and the * remote end starts to send again the ACK clock takes over and * provides the most current window information. * * We must avoid the silly window syndrome whereas every read * from the receive buffer, no matter how small, causes a window * update to be sent. We also should avoid sending a flurry of * window updates when the socket buffer had queued a lot of data * and the application is doing small reads. * * Prevent a flurry of pointless window updates by only sending * an update when we can increase the advertized window by more * than 1/4th of the socket buffer capacity. When the buffer is * getting full or is very small be more aggressive and send an * update whenever we can increase by two mss sized segments. * In all other situations the ACK's to new incoming data will * carry further window increases. * * Don't send an independent window update if a delayed * ACK is pending (it will get piggy-backed on it) or the * remote side already has done a half-close and won't send * more data. Skip this if the connection is in T/TCP * half-open state. */ if (recwin > 0 && !(tp->t_flags & TF_NEEDSYN) && !(tp->t_flags & TF_DELACK) && !TCPS_HAVERCVDFIN(tp->t_state)) { /* * "adv" is the amount we could increase the window, * taking into account that we are limited by * TCP_MAXWIN << tp->rcv_scale. */ long adv; int oldwin; adv = min(recwin, (long)TCP_MAXWIN << tp->rcv_scale); if (SEQ_GT(tp->rcv_adv, tp->rcv_nxt)) { oldwin = (tp->rcv_adv - tp->rcv_nxt); adv -= oldwin; } else oldwin = 0; /* * If the new window size ends up being the same as the old * size when it is scaled, then don't force a window update. */ if (oldwin >> tp->rcv_scale == (adv + oldwin) >> tp->rcv_scale) goto dontupdate; if (adv >= (long)(2 * tp->t_maxseg) && (adv >= (long)(so->so_rcv.sb_hiwat / 4) || recwin <= (long)(so->so_rcv.sb_hiwat / 8) || so->so_rcv.sb_hiwat <= 8 * tp->t_maxseg)) goto send; } dontupdate: /* * Send if we owe the peer an ACK, RST, SYN, or urgent data. ACKNOW * is also a catch-all for the retransmit timer timeout case. */ if (tp->t_flags & TF_ACKNOW) goto send; if ((flags & TH_RST) || ((flags & TH_SYN) && (tp->t_flags & TF_NEEDSYN) == 0)) goto send; if (SEQ_GT(tp->snd_up, tp->snd_una)) goto send; /* * If our state indicates that FIN should be sent * and we have not yet done so, then we need to send. */ if (flags & TH_FIN && ((tp->t_flags & TF_SENTFIN) == 0 || tp->snd_nxt == tp->snd_una)) goto send; /* * In SACK, it is possible for tcp_output to fail to send a segment * after the retransmission timer has been turned off. Make sure * that the retransmission timer is set. */ if ((tp->t_flags & TF_SACK_PERMIT) && SEQ_GT(tp->snd_max, tp->snd_una) && !tcp_timer_active(tp, TT_REXMT) && !tcp_timer_active(tp, TT_PERSIST)) { tcp_timer_activate(tp, TT_REXMT, tp->t_rxtcur); goto just_return; } /* * TCP window updates are not reliable, rather a polling protocol * using ``persist'' packets is used to insure receipt of window * updates. The three ``states'' for the output side are: * idle not doing retransmits or persists * persisting to move a small or zero window * (re)transmitting and thereby not persisting * * tcp_timer_active(tp, TT_PERSIST) * is true when we are in persist state. * (tp->t_flags & TF_FORCEDATA) * is set when we are called to send a persist packet. * tcp_timer_active(tp, TT_REXMT) * is set when we are retransmitting * The output side is idle when both timers are zero. * * If send window is too small, there is data to transmit, and no * retransmit or persist is pending, then go to persist state. * If nothing happens soon, send when timer expires: * if window is nonzero, transmit what we can, * otherwise force out a byte. */ if (so->so_snd.sb_cc && !tcp_timer_active(tp, TT_REXMT) && !tcp_timer_active(tp, TT_PERSIST)) { tp->t_rxtshift = 0; tcp_setpersist(tp); } /* * No reason to send a segment, just return. */ just_return: SOCKBUF_UNLOCK(&so->so_snd); return (0); send: SOCKBUF_LOCK_ASSERT(&so->so_snd); /* * Before ESTABLISHED, force sending of initial options * unless TCP set not to do any options. * NOTE: we assume that the IP/TCP header plus TCP options * always fit in a single mbuf, leaving room for a maximum * link header, i.e. * max_linkhdr + sizeof (struct tcpiphdr) + optlen <= MCLBYTES */ optlen = 0; #ifdef INET6 if (isipv6) hdrlen = sizeof (struct ip6_hdr) + sizeof (struct tcphdr); else #endif hdrlen = sizeof (struct tcpiphdr); /* * Compute options for segment. * We only have to care about SYN and established connection * segments. Options for SYN-ACK segments are handled in TCP * syncache. */ if ((tp->t_flags & TF_NOOPT) == 0) { to.to_flags = 0; /* Maximum segment size. */ if (flags & TH_SYN) { tp->snd_nxt = tp->iss; to.to_mss = tcp_mssopt(&tp->t_inpcb->inp_inc); to.to_flags |= TOF_MSS; } /* Window scaling. */ if ((flags & TH_SYN) && (tp->t_flags & TF_REQ_SCALE)) { to.to_wscale = tp->request_r_scale; to.to_flags |= TOF_SCALE; } /* Timestamps. */ if ((tp->t_flags & TF_RCVD_TSTMP) || ((flags & TH_SYN) && (tp->t_flags & TF_REQ_TSTMP))) { to.to_tsval = tcp_ts_getticks() + tp->ts_offset; to.to_tsecr = tp->ts_recent; to.to_flags |= TOF_TS; /* Set receive buffer autosizing timestamp. */ if (tp->rfbuf_ts == 0 && (so->so_rcv.sb_flags & SB_AUTOSIZE)) tp->rfbuf_ts = tcp_ts_getticks(); } /* Selective ACK's. */ if (tp->t_flags & TF_SACK_PERMIT) { if (flags & TH_SYN) to.to_flags |= TOF_SACKPERM; else if (TCPS_HAVEESTABLISHED(tp->t_state) && (tp->t_flags & TF_SACK_PERMIT) && tp->rcv_numsacks > 0) { to.to_flags |= TOF_SACK; to.to_nsacks = tp->rcv_numsacks; to.to_sacks = (u_char *)tp->sackblks; } } #ifdef TCP_SIGNATURE /* TCP-MD5 (RFC2385). */ if (tp->t_flags & TF_SIGNATURE) to.to_flags |= TOF_SIGNATURE; #endif /* TCP_SIGNATURE */ /* Processing the options. */ hdrlen += optlen = tcp_addoptions(&to, opt); } #ifdef INET6 if (isipv6) ipoptlen = ip6_optlen(tp->t_inpcb); else #endif if (tp->t_inpcb->inp_options) ipoptlen = tp->t_inpcb->inp_options->m_len - offsetof(struct ipoption, ipopt_list); else ipoptlen = 0; #ifdef IPSEC ipoptlen += ipsec_optlen; #endif /* * Adjust data length if insertion of options will * bump the packet length beyond the t_maxopd length. * Clear the FIN bit because we cut off the tail of * the segment. */ if (len + optlen + ipoptlen > tp->t_maxopd) { flags &= ~TH_FIN; if (tso) { u_int if_hw_tsomax; u_int if_hw_tsomaxsegcount; u_int if_hw_tsomaxsegsize; struct mbuf *mb; u_int moff; int max_len; /* extract TSO information */ if_hw_tsomax = tp->t_tsomax; if_hw_tsomaxsegcount = tp->t_tsomaxsegcount; if_hw_tsomaxsegsize = tp->t_tsomaxsegsize; /* * Limit a TSO burst to prevent it from * overflowing or exceeding the maximum length * allowed by the network interface: */ KASSERT(ipoptlen == 0, ("%s: TSO can't do IP options", __func__)); /* * Check if we should limit by maximum payload * length: */ if (if_hw_tsomax != 0) { /* compute maximum TSO length */ max_len = (if_hw_tsomax - hdrlen); if (max_len <= 0) { len = 0; } else if (len > (u_int)max_len) { sendalot = 1; len = (u_int)max_len; } } /* * Check if we should limit by maximum segment * size and count: */ if (if_hw_tsomaxsegcount != 0 && if_hw_tsomaxsegsize != 0) { max_len = 0; mb = sbsndmbuf(&so->so_snd, off, &moff); while (mb != NULL && (u_int)max_len < len) { u_int cur_length; u_int cur_frags; /* * Get length of mbuf fragment * and how many hardware * frags, rounded up, it would * use: */ cur_length = (mb->m_len - moff); cur_frags = (cur_length + if_hw_tsomaxsegsize - 1) / if_hw_tsomaxsegsize; /* Handle special case: Zero Length Mbuf */ if (cur_frags == 0) cur_frags = 1; /* * Check if the fragment limit * will be reached or * exceeded: */ if (cur_frags >= if_hw_tsomaxsegcount) { max_len += min(cur_length, if_hw_tsomaxsegcount * if_hw_tsomaxsegsize); break; } max_len += cur_length; if_hw_tsomaxsegcount -= cur_frags; moff = 0; mb = mb->m_next; } if (max_len <= 0) { len = 0; } else if (len > (u_int)max_len) { sendalot = 1; len = (u_int)max_len; } } /* * Prevent the last segment from being * fractional unless the send sockbuf can be * emptied: */ max_len = (tp->t_maxopd - optlen); if ((off + len) < so->so_snd.sb_cc) { moff = len % (u_int)max_len; if (moff != 0) { len -= moff; sendalot = 1; } } /* * In case there are too many small fragments * don't use TSO: */ if (len <= (u_int)max_len) { len = (u_int)max_len; sendalot = 1; tso = 0; } /* * Send the FIN in a separate segment * after the bulk sending is done. * We don't trust the TSO implementations * to clear the FIN flag on all but the * last segment. */ if (tp->t_flags & TF_NEEDFIN) sendalot = 1; } else { len = tp->t_maxopd - optlen - ipoptlen; sendalot = 1; } } else tso = 0; KASSERT(len + hdrlen + ipoptlen <= IP_MAXPACKET, ("%s: len > IP_MAXPACKET", __func__)); /*#ifdef DIAGNOSTIC*/ #ifdef INET6 if (max_linkhdr + hdrlen > MCLBYTES) #else if (max_linkhdr + hdrlen > MHLEN) #endif panic("tcphdr too big"); /*#endif*/ /* * This KASSERT is here to catch edge cases at a well defined place. * Before, those had triggered (random) panic conditions further down. */ KASSERT(len >= 0, ("[%s:%d]: len < 0", __func__, __LINE__)); /* * Grab a header mbuf, attaching a copy of data to * be transmitted, and initialize the header from * the template for sends on this connection. */ if (len) { struct mbuf *mb; u_int moff; if ((tp->t_flags & TF_FORCEDATA) && len == 1) TCPSTAT_INC(tcps_sndprobe); else if (SEQ_LT(tp->snd_nxt, tp->snd_max) || sack_rxmit) { tp->t_sndrexmitpack++; TCPSTAT_INC(tcps_sndrexmitpack); TCPSTAT_ADD(tcps_sndrexmitbyte, len); } else { TCPSTAT_INC(tcps_sndpack); TCPSTAT_ADD(tcps_sndbyte, len); } #ifdef INET6 if (MHLEN < hdrlen + max_linkhdr) m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); else #endif m = m_gethdr(M_NOWAIT, MT_DATA); if (m == NULL) { SOCKBUF_UNLOCK(&so->so_snd); error = ENOBUFS; sack_rxmit = 0; goto out; } m->m_data += max_linkhdr; m->m_len = hdrlen; /* * Start the m_copy functions from the closest mbuf * to the offset in the socket buffer chain. */ mb = sbsndptr(&so->so_snd, off, len, &moff); if (len <= MHLEN - hdrlen - max_linkhdr) { m_copydata(mb, moff, (int)len, mtod(m, caddr_t) + hdrlen); m->m_len += len; } else { m->m_next = m_copy(mb, moff, (int)len); if (m->m_next == NULL) { SOCKBUF_UNLOCK(&so->so_snd); (void) m_free(m); error = ENOBUFS; sack_rxmit = 0; goto out; } } /* * If we're sending everything we've got, set PUSH. * (This will keep happy those implementations which only * give data to the user when a buffer fills or * a PUSH comes in.) */ if (off + len == so->so_snd.sb_cc) flags |= TH_PUSH; SOCKBUF_UNLOCK(&so->so_snd); } else { SOCKBUF_UNLOCK(&so->so_snd); if (tp->t_flags & TF_ACKNOW) TCPSTAT_INC(tcps_sndacks); else if (flags & (TH_SYN|TH_FIN|TH_RST)) TCPSTAT_INC(tcps_sndctrl); else if (SEQ_GT(tp->snd_up, tp->snd_una)) TCPSTAT_INC(tcps_sndurg); else TCPSTAT_INC(tcps_sndwinup); m = m_gethdr(M_NOWAIT, MT_DATA); if (m == NULL) { error = ENOBUFS; sack_rxmit = 0; goto out; } #ifdef INET6 if (isipv6 && (MHLEN < hdrlen + max_linkhdr) && MHLEN >= hdrlen) { MH_ALIGN(m, hdrlen); } else #endif m->m_data += max_linkhdr; m->m_len = hdrlen; } SOCKBUF_UNLOCK_ASSERT(&so->so_snd); m->m_pkthdr.rcvif = (struct ifnet *)0; #ifdef MAC mac_inpcb_create_mbuf(tp->t_inpcb, m); #endif #ifdef INET6 if (isipv6) { ip6 = mtod(m, struct ip6_hdr *); th = (struct tcphdr *)(ip6 + 1); tcpip_fillheaders(tp->t_inpcb, ip6, th); } else #endif /* INET6 */ { ip = mtod(m, struct ip *); ipov = (struct ipovly *)ip; th = (struct tcphdr *)(ip + 1); tcpip_fillheaders(tp->t_inpcb, ip, th); } /* * Fill in fields, remembering maximum advertised * window for use in delaying messages about window sizes. * If resending a FIN, be sure not to use a new sequence number. */ if (flags & TH_FIN && tp->t_flags & TF_SENTFIN && tp->snd_nxt == tp->snd_max) tp->snd_nxt--; /* * If we are starting a connection, send ECN setup * SYN packet. If we are on a retransmit, we may * resend those bits a number of times as per * RFC 3168. */ if (tp->t_state == TCPS_SYN_SENT && V_tcp_do_ecn) { if (tp->t_rxtshift >= 1) { if (tp->t_rxtshift <= V_tcp_ecn_maxretries) flags |= TH_ECE|TH_CWR; } else flags |= TH_ECE|TH_CWR; } if (tp->t_state == TCPS_ESTABLISHED && (tp->t_flags & TF_ECN_PERMIT)) { /* * If the peer has ECN, mark data packets with * ECN capable transmission (ECT). * Ignore pure ack packets, retransmissions and window probes. */ if (len > 0 && SEQ_GEQ(tp->snd_nxt, tp->snd_max) && !((tp->t_flags & TF_FORCEDATA) && len == 1)) { #ifdef INET6 if (isipv6) ip6->ip6_flow |= htonl(IPTOS_ECN_ECT0 << 20); else #endif ip->ip_tos |= IPTOS_ECN_ECT0; TCPSTAT_INC(tcps_ecn_ect0); } /* * Reply with proper ECN notifications. */ if (tp->t_flags & TF_ECN_SND_CWR) { flags |= TH_CWR; tp->t_flags &= ~TF_ECN_SND_CWR; } if (tp->t_flags & TF_ECN_SND_ECE) flags |= TH_ECE; } /* * If we are doing retransmissions, then snd_nxt will * not reflect the first unsent octet. For ACK only * packets, we do not want the sequence number of the * retransmitted packet, we want the sequence number * of the next unsent octet. So, if there is no data * (and no SYN or FIN), use snd_max instead of snd_nxt * when filling in ti_seq. But if we are in persist * state, snd_max might reflect one byte beyond the * right edge of the window, so use snd_nxt in that * case, since we know we aren't doing a retransmission. * (retransmit and persist are mutually exclusive...) */ if (sack_rxmit == 0) { if (len || (flags & (TH_SYN|TH_FIN)) || tcp_timer_active(tp, TT_PERSIST)) th->th_seq = htonl(tp->snd_nxt); else th->th_seq = htonl(tp->snd_max); } else { th->th_seq = htonl(p->rxmit); p->rxmit += len; tp->sackhint.sack_bytes_rexmit += len; } th->th_ack = htonl(tp->rcv_nxt); if (optlen) { bcopy(opt, th + 1, optlen); th->th_off = (sizeof (struct tcphdr) + optlen) >> 2; } th->th_flags = flags; /* * Calculate receive window. Don't shrink window, * but avoid silly window syndrome. */ if (recwin < (long)(so->so_rcv.sb_hiwat / 4) && recwin < (long)tp->t_maxseg) recwin = 0; if (SEQ_GT(tp->rcv_adv, tp->rcv_nxt) && recwin < (long)(tp->rcv_adv - tp->rcv_nxt)) recwin = (long)(tp->rcv_adv - tp->rcv_nxt); if (recwin > (long)TCP_MAXWIN << tp->rcv_scale) recwin = (long)TCP_MAXWIN << tp->rcv_scale; /* * According to RFC1323 the window field in a SYN (i.e., a * or ) segment itself is never scaled. The * case is handled in syncache. */ if (flags & TH_SYN) th->th_win = htons((u_short) (min(sbspace(&so->so_rcv), TCP_MAXWIN))); else th->th_win = htons((u_short)(recwin >> tp->rcv_scale)); /* * Adjust the RXWIN0SENT flag - indicate that we have advertised * a 0 window. This may cause the remote transmitter to stall. This * flag tells soreceive() to disable delayed acknowledgements when * draining the buffer. This can occur if the receiver is attempting * to read more data than can be buffered prior to transmitting on * the connection. */ if (th->th_win == 0) { tp->t_sndzerowin++; tp->t_flags |= TF_RXWIN0SENT; } else tp->t_flags &= ~TF_RXWIN0SENT; if (SEQ_GT(tp->snd_up, tp->snd_nxt)) { th->th_urp = htons((u_short)(tp->snd_up - tp->snd_nxt)); th->th_flags |= TH_URG; } else /* * If no urgent pointer to send, then we pull * the urgent pointer to the left edge of the send window * so that it doesn't drift into the send window on sequence * number wraparound. */ tp->snd_up = tp->snd_una; /* drag it along */ #ifdef TCP_SIGNATURE if (tp->t_flags & TF_SIGNATURE) { int sigoff = to.to_signature - opt; tcp_signature_compute(m, 0, len, optlen, (u_char *)(th + 1) + sigoff, IPSEC_DIR_OUTBOUND); } #endif /* * Put TCP length in extended header, and then * checksum extended header and data. */ m->m_pkthdr.len = hdrlen + len; /* in6_cksum() need this */ m->m_pkthdr.csum_data = offsetof(struct tcphdr, th_sum); #ifdef INET6 if (isipv6) { /* * ip6_plen is not need to be filled now, and will be filled * in ip6_output. */ m->m_pkthdr.csum_flags = CSUM_TCP_IPV6; th->th_sum = in6_cksum_pseudo(ip6, sizeof(struct tcphdr) + optlen + len, IPPROTO_TCP, 0); } #endif #if defined(INET6) && defined(INET) else #endif #ifdef INET { m->m_pkthdr.csum_flags = CSUM_TCP; th->th_sum = in_pseudo(ip->ip_src.s_addr, ip->ip_dst.s_addr, htons(sizeof(struct tcphdr) + IPPROTO_TCP + len + optlen)); /* IP version must be set here for ipv4/ipv6 checking later */ KASSERT(ip->ip_v == IPVERSION, ("%s: IP version incorrect: %d", __func__, ip->ip_v)); } #endif /* * Enable TSO and specify the size of the segments. * The TCP pseudo header checksum is always provided. * XXX: Fixme: This is currently not the case for IPv6. */ if (tso) { KASSERT(len > tp->t_maxopd - optlen, ("%s: len <= tso_segsz", __func__)); m->m_pkthdr.csum_flags |= CSUM_TSO; m->m_pkthdr.tso_segsz = tp->t_maxopd - optlen; } #ifdef IPSEC KASSERT(len + hdrlen + ipoptlen - ipsec_optlen == m_length(m, NULL), ("%s: mbuf chain shorter than expected: %ld + %u + %u - %u != %u", __func__, len, hdrlen, ipoptlen, ipsec_optlen, m_length(m, NULL))); #else KASSERT(len + hdrlen + ipoptlen == m_length(m, NULL), ("%s: mbuf chain shorter than expected: %ld + %u + %u != %u", __func__, len, hdrlen, ipoptlen, m_length(m, NULL))); #endif /* Run HHOOK_TCP_ESTABLISHED_OUT helper hooks. */ hhook_run_tcp_est_out(tp, th, &to, len, tso); #ifdef TCPDEBUG /* * Trace. */ if (so->so_options & SO_DEBUG) { u_short save = 0; #ifdef INET6 if (!isipv6) #endif { save = ipov->ih_len; ipov->ih_len = htons(m->m_pkthdr.len /* - hdrlen + (th->th_off << 2) */); } tcp_trace(TA_OUTPUT, tp->t_state, tp, mtod(m, void *), th, 0); #ifdef INET6 if (!isipv6) #endif ipov->ih_len = save; } #endif /* TCPDEBUG */ /* * Fill in IP length and desired time to live and * send to IP level. There should be a better way * to handle ttl and tos; we could keep them in * the template, but need a way to checksum without them. */ /* * m->m_pkthdr.len should have been set before checksum calculation, * because in6_cksum() need it. */ #ifdef INET6 if (isipv6) { struct route_in6 ro; bzero(&ro, sizeof(ro)); /* * we separately set hoplimit for every segment, since the * user might want to change the value via setsockopt. * Also, desired default hop limit might be changed via * Neighbor Discovery. */ ip6->ip6_hlim = in6_selecthlim(tp->t_inpcb, NULL); /* * Set the packet size here for the benefit of DTrace probes. * ip6_output() will set it properly; it's supposed to include * the option header lengths as well. */ ip6->ip6_plen = htons(m->m_pkthdr.len - sizeof(*ip6)); if (tp->t_state == TCPS_SYN_SENT) TCP_PROBE5(connect__request, NULL, tp, ip6, tp, th); TCP_PROBE5(send, NULL, tp, ip6, tp, th); /* TODO: IPv6 IP6TOS_ECT bit on */ error = ip6_output(m, tp->t_inpcb->in6p_outputopts, &ro, ((so->so_options & SO_DONTROUTE) ? IP_ROUTETOIF : 0), NULL, NULL, tp->t_inpcb); if (error == EMSGSIZE && ro.ro_rt != NULL) mtu = ro.ro_rt->rt_mtu; RO_RTFREE(&ro); } #endif /* INET6 */ #if defined(INET) && defined(INET6) else #endif #ifdef INET { struct route ro; bzero(&ro, sizeof(ro)); ip->ip_len = htons(m->m_pkthdr.len); #ifdef INET6 if (tp->t_inpcb->inp_vflag & INP_IPV6PROTO) ip->ip_ttl = in6_selecthlim(tp->t_inpcb, NULL); #endif /* INET6 */ /* * If we do path MTU discovery, then we set DF on every packet. * This might not be the best thing to do according to RFC3390 * Section 2. However the tcp hostcache migitates the problem * so it affects only the first tcp connection with a host. * * NB: Don't set DF on small MTU/MSS to have a safe fallback. */ if (V_path_mtu_discovery && tp->t_maxopd > V_tcp_minmss) ip->ip_off |= htons(IP_DF); if (tp->t_state == TCPS_SYN_SENT) TCP_PROBE5(connect__request, NULL, tp, ip, tp, th); TCP_PROBE5(send, NULL, tp, ip, tp, th); error = ip_output(m, tp->t_inpcb->inp_options, &ro, ((so->so_options & SO_DONTROUTE) ? IP_ROUTETOIF : 0), 0, tp->t_inpcb); if (error == EMSGSIZE && ro.ro_rt != NULL) mtu = ro.ro_rt->rt_mtu; RO_RTFREE(&ro); } #endif /* INET */ out: /* * In transmit state, time the transmission and arrange for * the retransmit. In persist state, just set snd_max. */ if ((tp->t_flags & TF_FORCEDATA) == 0 || !tcp_timer_active(tp, TT_PERSIST)) { tcp_seq startseq = tp->snd_nxt; /* * Advance snd_nxt over sequence space of this segment. */ if (flags & (TH_SYN|TH_FIN)) { if (flags & TH_SYN) tp->snd_nxt++; if (flags & TH_FIN) { tp->snd_nxt++; tp->t_flags |= TF_SENTFIN; } } if (sack_rxmit) goto timer; tp->snd_nxt += len; if (SEQ_GT(tp->snd_nxt, tp->snd_max)) { tp->snd_max = tp->snd_nxt; /* * Time this transmission if not a retransmission and * not currently timing anything. */ if (tp->t_rtttime == 0) { tp->t_rtttime = ticks; tp->t_rtseq = startseq; TCPSTAT_INC(tcps_segstimed); } } /* * Set retransmit timer if not currently set, * and not doing a pure ack or a keep-alive probe. * Initial value for retransmit timer is smoothed * round-trip time + 2 * round-trip time variance. * Initialize shift counter which is used for backoff * of retransmit time. */ timer: if (!tcp_timer_active(tp, TT_REXMT) && ((sack_rxmit && tp->snd_nxt != tp->snd_max) || (tp->snd_nxt != tp->snd_una))) { if (tcp_timer_active(tp, TT_PERSIST)) { tcp_timer_activate(tp, TT_PERSIST, 0); tp->t_rxtshift = 0; } tcp_timer_activate(tp, TT_REXMT, tp->t_rxtcur); } } else { /* * Persist case, update snd_max but since we are in * persist mode (no window) we do not update snd_nxt. */ int xlen = len; if (flags & TH_SYN) ++xlen; if (flags & TH_FIN) { ++xlen; tp->t_flags |= TF_SENTFIN; } if (SEQ_GT(tp->snd_nxt + xlen, tp->snd_max)) tp->snd_max = tp->snd_nxt + len; } if (error) { /* * We know that the packet was lost, so back out the * sequence number advance, if any. * * If the error is EPERM the packet got blocked by the * local firewall. Normally we should terminate the * connection but the blocking may have been spurious * due to a firewall reconfiguration cycle. So we treat * it like a packet loss and let the retransmit timer and * timeouts do their work over time. * XXX: It is a POLA question whether calling tcp_drop right * away would be the really correct behavior instead. */ if (((tp->t_flags & TF_FORCEDATA) == 0 || !tcp_timer_active(tp, TT_PERSIST)) && ((flags & TH_SYN) == 0) && (error != EPERM)) { if (sack_rxmit) { p->rxmit -= len; tp->sackhint.sack_bytes_rexmit -= len; KASSERT(tp->sackhint.sack_bytes_rexmit >= 0, ("sackhint bytes rtx >= 0")); } else tp->snd_nxt -= len; } SOCKBUF_UNLOCK_ASSERT(&so->so_snd); /* Check gotos. */ switch (error) { case EPERM: tp->t_softerror = error; return (error); case ENOBUFS: if (!tcp_timer_active(tp, TT_REXMT) && !tcp_timer_active(tp, TT_PERSIST)) tcp_timer_activate(tp, TT_REXMT, tp->t_rxtcur); tp->snd_cwnd = tp->t_maxseg; return (0); case EMSGSIZE: /* * For some reason the interface we used initially * to send segments changed to another or lowered * its MTU. * If TSO was active we either got an interface * without TSO capabilits or TSO was turned off. * If we obtained mtu from ip_output() then update * it and try again. */ if (tso) tp->t_flags &= ~TF_TSO; if (mtu != 0) { tcp_mss_update(tp, -1, mtu, NULL, NULL); goto again; } return (error); case EHOSTDOWN: case EHOSTUNREACH: case ENETDOWN: case ENETUNREACH: if (TCPS_HAVERCVDSYN(tp->t_state)) { tp->t_softerror = error; return (0); } /* FALLTHROUGH */ default: return (error); } } TCPSTAT_INC(tcps_sndtotal); /* * Data sent (as far as we can tell). * If this advertises a larger window than any other segment, * then remember the size of the advertised window. * Any pending ACK has now been sent. */ if (recwin >= 0 && SEQ_GT(tp->rcv_nxt + recwin, tp->rcv_adv)) tp->rcv_adv = tp->rcv_nxt + recwin; tp->last_ack_sent = tp->rcv_nxt; tp->t_flags &= ~(TF_ACKNOW | TF_DELACK); if (tcp_timer_active(tp, TT_DELACK)) tcp_timer_activate(tp, TT_DELACK, 0); #if 0 /* * This completely breaks TCP if newreno is turned on. What happens * is that if delayed-acks are turned on on the receiver, this code * on the transmitter effectively destroys the TCP window, forcing * it to four packets (1.5Kx4 = 6K window). */ if (sendalot && --maxburst) goto again; #endif if (sendalot) goto again; return (0); } void tcp_setpersist(struct tcpcb *tp) { int t = ((tp->t_srtt >> 2) + tp->t_rttvar) >> 1; int tt; tp->t_flags &= ~TF_PREVVALID; if (tcp_timer_active(tp, TT_REXMT)) panic("tcp_setpersist: retransmit pending"); /* * Start/restart persistance timer. */ TCPT_RANGESET(tt, t * tcp_backoff[tp->t_rxtshift], TCPTV_PERSMIN, TCPTV_PERSMAX); tcp_timer_activate(tp, TT_PERSIST, tt); if (tp->t_rxtshift < TCP_MAXRXTSHIFT) tp->t_rxtshift++; } /* * Insert TCP options according to the supplied parameters to the place * optp in a consistent way. Can handle unaligned destinations. * * The order of the option processing is crucial for optimal packing and * alignment for the scarce option space. * * The optimal order for a SYN/SYN-ACK segment is: * MSS (4) + NOP (1) + Window scale (3) + SACK permitted (2) + * Timestamp (10) + Signature (18) = 38 bytes out of a maximum of 40. * * The SACK options should be last. SACK blocks consume 8*n+2 bytes. * So a full size SACK blocks option is 34 bytes (with 4 SACK blocks). * At minimum we need 10 bytes (to generate 1 SACK block). If both * TCP Timestamps (12 bytes) and TCP Signatures (18 bytes) are present, * we only have 10 bytes for SACK options (40 - (12 + 18)). */ int tcp_addoptions(struct tcpopt *to, u_char *optp) { u_int mask, optlen = 0; for (mask = 1; mask < TOF_MAXOPT; mask <<= 1) { if ((to->to_flags & mask) != mask) continue; if (optlen == TCP_MAXOLEN) break; switch (to->to_flags & mask) { case TOF_MSS: while (optlen % 4) { optlen += TCPOLEN_NOP; *optp++ = TCPOPT_NOP; } if (TCP_MAXOLEN - optlen < TCPOLEN_MAXSEG) continue; optlen += TCPOLEN_MAXSEG; *optp++ = TCPOPT_MAXSEG; *optp++ = TCPOLEN_MAXSEG; to->to_mss = htons(to->to_mss); bcopy((u_char *)&to->to_mss, optp, sizeof(to->to_mss)); optp += sizeof(to->to_mss); break; case TOF_SCALE: while (!optlen || optlen % 2 != 1) { optlen += TCPOLEN_NOP; *optp++ = TCPOPT_NOP; } if (TCP_MAXOLEN - optlen < TCPOLEN_WINDOW) continue; optlen += TCPOLEN_WINDOW; *optp++ = TCPOPT_WINDOW; *optp++ = TCPOLEN_WINDOW; *optp++ = to->to_wscale; break; case TOF_SACKPERM: while (optlen % 2) { optlen += TCPOLEN_NOP; *optp++ = TCPOPT_NOP; } if (TCP_MAXOLEN - optlen < TCPOLEN_SACK_PERMITTED) continue; optlen += TCPOLEN_SACK_PERMITTED; *optp++ = TCPOPT_SACK_PERMITTED; *optp++ = TCPOLEN_SACK_PERMITTED; break; case TOF_TS: while (!optlen || optlen % 4 != 2) { optlen += TCPOLEN_NOP; *optp++ = TCPOPT_NOP; } if (TCP_MAXOLEN - optlen < TCPOLEN_TIMESTAMP) continue; optlen += TCPOLEN_TIMESTAMP; *optp++ = TCPOPT_TIMESTAMP; *optp++ = TCPOLEN_TIMESTAMP; to->to_tsval = htonl(to->to_tsval); to->to_tsecr = htonl(to->to_tsecr); bcopy((u_char *)&to->to_tsval, optp, sizeof(to->to_tsval)); optp += sizeof(to->to_tsval); bcopy((u_char *)&to->to_tsecr, optp, sizeof(to->to_tsecr)); optp += sizeof(to->to_tsecr); break; case TOF_SIGNATURE: { int siglen = TCPOLEN_SIGNATURE - 2; while (!optlen || optlen % 4 != 2) { optlen += TCPOLEN_NOP; *optp++ = TCPOPT_NOP; } if (TCP_MAXOLEN - optlen < TCPOLEN_SIGNATURE) continue; optlen += TCPOLEN_SIGNATURE; *optp++ = TCPOPT_SIGNATURE; *optp++ = TCPOLEN_SIGNATURE; to->to_signature = optp; while (siglen--) *optp++ = 0; break; } case TOF_SACK: { int sackblks = 0; struct sackblk *sack = (struct sackblk *)to->to_sacks; tcp_seq sack_seq; while (!optlen || optlen % 4 != 2) { optlen += TCPOLEN_NOP; *optp++ = TCPOPT_NOP; } if (TCP_MAXOLEN - optlen < TCPOLEN_SACKHDR + TCPOLEN_SACK) continue; optlen += TCPOLEN_SACKHDR; *optp++ = TCPOPT_SACK; sackblks = min(to->to_nsacks, (TCP_MAXOLEN - optlen) / TCPOLEN_SACK); *optp++ = TCPOLEN_SACKHDR + sackblks * TCPOLEN_SACK; while (sackblks--) { sack_seq = htonl(sack->start); bcopy((u_char *)&sack_seq, optp, sizeof(sack_seq)); optp += sizeof(sack_seq); sack_seq = htonl(sack->end); bcopy((u_char *)&sack_seq, optp, sizeof(sack_seq)); optp += sizeof(sack_seq); optlen += TCPOLEN_SACK; sack++; } TCPSTAT_INC(tcps_sack_send_blocks); break; } default: panic("%s: unknown TCP option type", __func__); break; } } /* Terminate and pad TCP options to a 4 byte boundary. */ if (optlen % 4) { optlen += TCPOLEN_EOL; *optp++ = TCPOPT_EOL; } /* * According to RFC 793 (STD0007): * "The content of the header beyond the End-of-Option option * must be header padding (i.e., zero)." * and later: "The padding is composed of zeros." */ while (optlen % 4) { optlen += TCPOLEN_PAD; *optp++ = TCPOPT_PAD; } KASSERT(optlen <= TCP_MAXOLEN, ("%s: TCP options too long", __func__)); return (optlen); }