/* * ng_ubt.c */ /*- * SPDX-License-Identifier: BSD-2-Clause * * Copyright (c) 2001-2009 Maksim Yevmenkin * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $Id: ng_ubt.c,v 1.16 2003/10/10 19:15:06 max Exp $ */ /* * NOTE: ng_ubt2 driver has a split personality. On one side it is * a USB device driver and on the other it is a Netgraph node. This * driver will *NOT* create traditional /dev/ enties, only Netgraph * node. * * NOTE ON LOCKS USED: ng_ubt2 drives uses 2 locks (mutexes) * * 1) sc_if_mtx - lock for device's interface #0 and #1. This lock is used * by USB for any USB request going over device's interface #0 and #1, * i.e. interrupt, control, bulk and isoc. transfers. * * 2) sc_ng_mtx - this lock is used to protect shared (between USB, Netgraph * and Taskqueue) data, such as outgoing mbuf queues, task flags and hook * pointer. This lock *SHOULD NOT* be grabbed for a long time. In fact, * think of it as a spin lock. * * NOTE ON LOCKING STRATEGY: ng_ubt2 driver operates in 3 different contexts. * * 1) USB context. This is where all the USB related stuff happens. All * callbacks run in this context. All callbacks are called (by USB) with * appropriate interface lock held. It is (generally) allowed to grab * any additional locks. * * 2) Netgraph context. This is where all the Netgraph related stuff happens. * Since we mark node as WRITER, the Netgraph node will be "locked" (from * Netgraph point of view). Any variable that is only modified from the * Netgraph context does not require any additional locking. It is generally * *NOT* allowed to grab *ANY* additional locks. Whatever you do, *DO NOT* * grab any lock in the Netgraph context that could cause de-scheduling of * the Netgraph thread for significant amount of time. In fact, the only * lock that is allowed in the Netgraph context is the sc_ng_mtx lock. * Also make sure that any code that is called from the Netgraph context * follows the rule above. * * 3) Taskqueue context. This is where ubt_task runs. Since we are generally * NOT allowed to grab any lock that could cause de-scheduling in the * Netgraph context, and, USB requires us to grab interface lock before * doing things with transfers, it is safer to transition from the Netgraph * context to the Taskqueue context before we can call into USB subsystem. * * So, to put everything together, the rules are as follows. * It is OK to call from the USB context or the Taskqueue context into * the Netgraph context (i.e. call NG_SEND_xxx functions). In other words * it is allowed to call into the Netgraph context with locks held. * Is it *NOT* OK to call from the Netgraph context into the USB context, * because USB requires us to grab interface locks, and, it is safer to * avoid it. So, to make things safer we set task flags to indicate which * actions we want to perform and schedule ubt_task which would run in the * Taskqueue context. * Is is OK to call from the Taskqueue context into the USB context, * and, ubt_task does just that (i.e. grabs appropriate interface locks * before calling into USB). * Access to the outgoing queues, task flags and hook pointer is * controlled by the sc_ng_mtx lock. It is an unavoidable evil. Again, * sc_ng_mtx should really be a spin lock (and it is very likely to an * equivalent of spin lock due to adaptive nature of FreeBSD mutexes). * All USB callbacks accept softc pointer as a private data. USB ensures * that this pointer is valid. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "usbdevs.h" #include #include #include #define USB_DEBUG_VAR usb_debug #include #include #include #include #include #include #include #include #include #include #include static int ubt_modevent(module_t, int, void *); static device_probe_t ubt_probe; static device_attach_t ubt_attach; static device_detach_t ubt_detach; static void ubt_task_schedule(ubt_softc_p, int); static task_fn_t ubt_task; #define ubt_xfer_start(sc, i) usbd_transfer_start((sc)->sc_xfer[(i)]) /* Netgraph methods */ static ng_constructor_t ng_ubt_constructor; static ng_shutdown_t ng_ubt_shutdown; static ng_newhook_t ng_ubt_newhook; static ng_connect_t ng_ubt_connect; static ng_disconnect_t ng_ubt_disconnect; static ng_rcvmsg_t ng_ubt_rcvmsg; static ng_rcvdata_t ng_ubt_rcvdata; static int ng_usb_isoc_enable = 1; SYSCTL_INT(_net_bluetooth, OID_AUTO, usb_isoc_enable, CTLFLAG_RWTUN | CTLFLAG_MPSAFE, &ng_usb_isoc_enable, 0, "enable isochronous transfers"); /* Queue length */ static const struct ng_parse_struct_field ng_ubt_node_qlen_type_fields[] = { { "queue", &ng_parse_int32_type, }, { "qlen", &ng_parse_int32_type, }, { NULL, } }; static const struct ng_parse_type ng_ubt_node_qlen_type = { &ng_parse_struct_type, &ng_ubt_node_qlen_type_fields }; /* Stat info */ static const struct ng_parse_struct_field ng_ubt_node_stat_type_fields[] = { { "pckts_recv", &ng_parse_uint32_type, }, { "bytes_recv", &ng_parse_uint32_type, }, { "pckts_sent", &ng_parse_uint32_type, }, { "bytes_sent", &ng_parse_uint32_type, }, { "oerrors", &ng_parse_uint32_type, }, { "ierrors", &ng_parse_uint32_type, }, { NULL, } }; static const struct ng_parse_type ng_ubt_node_stat_type = { &ng_parse_struct_type, &ng_ubt_node_stat_type_fields }; /* Netgraph node command list */ static const struct ng_cmdlist ng_ubt_cmdlist[] = { { NGM_UBT_COOKIE, NGM_UBT_NODE_SET_DEBUG, "set_debug", &ng_parse_uint16_type, NULL }, { NGM_UBT_COOKIE, NGM_UBT_NODE_GET_DEBUG, "get_debug", NULL, &ng_parse_uint16_type }, { NGM_UBT_COOKIE, NGM_UBT_NODE_SET_QLEN, "set_qlen", &ng_ubt_node_qlen_type, NULL }, { NGM_UBT_COOKIE, NGM_UBT_NODE_GET_QLEN, "get_qlen", &ng_ubt_node_qlen_type, &ng_ubt_node_qlen_type }, { NGM_UBT_COOKIE, NGM_UBT_NODE_GET_STAT, "get_stat", NULL, &ng_ubt_node_stat_type }, { NGM_UBT_COOKIE, NGM_UBT_NODE_RESET_STAT, "reset_stat", NULL, NULL }, { 0, } }; /* Netgraph node type */ static struct ng_type typestruct = { .version = NG_ABI_VERSION, .name = NG_UBT_NODE_TYPE, .constructor = ng_ubt_constructor, .rcvmsg = ng_ubt_rcvmsg, .shutdown = ng_ubt_shutdown, .newhook = ng_ubt_newhook, .connect = ng_ubt_connect, .rcvdata = ng_ubt_rcvdata, .disconnect = ng_ubt_disconnect, .cmdlist = ng_ubt_cmdlist }; /**************************************************************************** **************************************************************************** ** USB specific **************************************************************************** ****************************************************************************/ /* USB methods */ static usb_callback_t ubt_probe_intr_callback; static usb_callback_t ubt_ctrl_write_callback; static usb_callback_t ubt_intr_read_callback; static usb_callback_t ubt_bulk_read_callback; static usb_callback_t ubt_bulk_write_callback; static usb_callback_t ubt_isoc_read_callback; static usb_callback_t ubt_isoc_write_callback; static int ubt_fwd_mbuf_up(ubt_softc_p, struct mbuf **); static int ubt_isoc_read_one_frame(struct usb_xfer *, int); /* * USB config * * The following desribes usb transfers that could be submitted on USB device. * * Interface 0 on the USB device must present the following endpoints * 1) Interrupt endpoint to receive HCI events * 2) Bulk IN endpoint to receive ACL data * 3) Bulk OUT endpoint to send ACL data * * Interface 1 on the USB device must present the following endpoints * 1) Isochronous IN endpoint to receive SCO data * 2) Isochronous OUT endpoint to send SCO data */ static const struct usb_config ubt_config[UBT_N_TRANSFER] = { /* * Interface #0 */ /* Outgoing bulk transfer - ACL packets */ [UBT_IF_0_BULK_DT_WR] = { .type = UE_BULK, .endpoint = UE_ADDR_ANY, .direction = UE_DIR_OUT, .if_index = 0, .bufsize = UBT_BULK_WRITE_BUFFER_SIZE, .flags = { .pipe_bof = 1, .force_short_xfer = 1, }, .callback = &ubt_bulk_write_callback, }, /* Incoming bulk transfer - ACL packets */ [UBT_IF_0_BULK_DT_RD] = { .type = UE_BULK, .endpoint = UE_ADDR_ANY, .direction = UE_DIR_IN, .if_index = 0, .bufsize = UBT_BULK_READ_BUFFER_SIZE, .flags = { .pipe_bof = 1, .short_xfer_ok = 1, }, .callback = &ubt_bulk_read_callback, }, /* Incoming interrupt transfer - HCI events */ [UBT_IF_0_INTR_DT_RD] = { .type = UE_INTERRUPT, .endpoint = UE_ADDR_ANY, .direction = UE_DIR_IN, .if_index = 0, .flags = { .pipe_bof = 1, .short_xfer_ok = 1, }, .bufsize = UBT_INTR_BUFFER_SIZE, .callback = &ubt_intr_read_callback, }, /* Outgoing control transfer - HCI commands */ [UBT_IF_0_CTRL_DT_WR] = { .type = UE_CONTROL, .endpoint = 0x00, /* control pipe */ .direction = UE_DIR_ANY, .if_index = 0, .bufsize = UBT_CTRL_BUFFER_SIZE, .callback = &ubt_ctrl_write_callback, .timeout = 5000, /* 5 seconds */ }, /* * Interface #1 */ /* Incoming isochronous transfer #1 - SCO packets */ [UBT_IF_1_ISOC_DT_RD1] = { .type = UE_ISOCHRONOUS, .endpoint = UE_ADDR_ANY, .direction = UE_DIR_IN, .if_index = 1, .bufsize = 0, /* use "wMaxPacketSize * frames" */ .frames = UBT_ISOC_NFRAMES, .flags = { .short_xfer_ok = 1, }, .callback = &ubt_isoc_read_callback, }, /* Incoming isochronous transfer #2 - SCO packets */ [UBT_IF_1_ISOC_DT_RD2] = { .type = UE_ISOCHRONOUS, .endpoint = UE_ADDR_ANY, .direction = UE_DIR_IN, .if_index = 1, .bufsize = 0, /* use "wMaxPacketSize * frames" */ .frames = UBT_ISOC_NFRAMES, .flags = { .short_xfer_ok = 1, }, .callback = &ubt_isoc_read_callback, }, /* Outgoing isochronous transfer #1 - SCO packets */ [UBT_IF_1_ISOC_DT_WR1] = { .type = UE_ISOCHRONOUS, .endpoint = UE_ADDR_ANY, .direction = UE_DIR_OUT, .if_index = 1, .bufsize = 0, /* use "wMaxPacketSize * frames" */ .frames = UBT_ISOC_NFRAMES, .flags = { .short_xfer_ok = 1, }, .callback = &ubt_isoc_write_callback, }, /* Outgoing isochronous transfer #2 - SCO packets */ [UBT_IF_1_ISOC_DT_WR2] = { .type = UE_ISOCHRONOUS, .endpoint = UE_ADDR_ANY, .direction = UE_DIR_OUT, .if_index = 1, .bufsize = 0, /* use "wMaxPacketSize * frames" */ .frames = UBT_ISOC_NFRAMES, .flags = { .short_xfer_ok = 1, }, .callback = &ubt_isoc_write_callback, }, }; /* * If for some reason device should not be attached then put * VendorID/ProductID pair into the list below. The format is * as follows: * * { USB_VPI(VENDOR_ID, PRODUCT_ID, 0) }, * * where VENDOR_ID and PRODUCT_ID are hex numbers. */ static const STRUCT_USB_HOST_ID ubt_ignore_devs[] = { /* AVM USB Bluetooth-Adapter BlueFritz! v1.0 */ { USB_VPI(USB_VENDOR_AVM, 0x2200, 0) }, /* Atheros 3011 with sflash firmware */ { USB_VPI(0x0cf3, 0x3002, 0) }, { USB_VPI(0x0cf3, 0xe019, 0) }, { USB_VPI(0x13d3, 0x3304, 0) }, { USB_VPI(0x0930, 0x0215, 0) }, { USB_VPI(0x0489, 0xe03d, 0) }, { USB_VPI(0x0489, 0xe027, 0) }, /* Atheros AR9285 Malbec with sflash firmware */ { USB_VPI(0x03f0, 0x311d, 0) }, /* Atheros 3012 with sflash firmware */ { USB_VPI(0x0cf3, 0x3004, 0), USB_DEV_BCD_LTEQ(1) }, { USB_VPI(0x0cf3, 0x311d, 0), USB_DEV_BCD_LTEQ(1) }, { USB_VPI(0x13d3, 0x3375, 0), USB_DEV_BCD_LTEQ(1) }, { USB_VPI(0x04ca, 0x3005, 0), USB_DEV_BCD_LTEQ(1) }, { USB_VPI(0x04ca, 0x3006, 0), USB_DEV_BCD_LTEQ(1) }, { USB_VPI(0x04ca, 0x3008, 0), USB_DEV_BCD_LTEQ(1) }, { USB_VPI(0x13d3, 0x3362, 0), USB_DEV_BCD_LTEQ(1) }, { USB_VPI(0x0cf3, 0xe004, 0), USB_DEV_BCD_LTEQ(1) }, { USB_VPI(0x0930, 0x0219, 0), USB_DEV_BCD_LTEQ(1) }, { USB_VPI(0x0489, 0xe057, 0), USB_DEV_BCD_LTEQ(1) }, { USB_VPI(0x13d3, 0x3393, 0), USB_DEV_BCD_LTEQ(1) }, { USB_VPI(0x0489, 0xe04e, 0), USB_DEV_BCD_LTEQ(1) }, { USB_VPI(0x0489, 0xe056, 0), USB_DEV_BCD_LTEQ(1) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_VPI(0x0489, 0xe02c, 0), USB_DEV_BCD_LTEQ(1) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_VPI(0x0489, 0xe03c, 0), USB_DEV_BCD_LTEQ(1) }, { USB_VPI(0x0489, 0xe036, 0), USB_DEV_BCD_LTEQ(1) }, /* Intel Wireless controllers are handled in ng_ubt_intel.c */ { USB_VPI(USB_VENDOR_INTEL2, 0x07dc, 0) }, { USB_VPI(USB_VENDOR_INTEL2, 0x0a2a, 0) }, { USB_VPI(USB_VENDOR_INTEL2, 0x0aa7, 0) }, { USB_VPI(USB_VENDOR_INTEL2, 0x0a2b, 0) }, { USB_VPI(USB_VENDOR_INTEL2, 0x0aaa, 0) }, { USB_VPI(USB_VENDOR_INTEL2, 0x0025, 0) }, { USB_VPI(USB_VENDOR_INTEL2, 0x0026, 0) }, { USB_VPI(USB_VENDOR_INTEL2, 0x0029, 0) }, /* * Some Intel controllers are not yet supported by ng_ubt_intel and * should be ignored. */ { USB_VPI(USB_VENDOR_INTEL2, 0x0032, 0) }, { USB_VPI(USB_VENDOR_INTEL2, 0x0033, 0) }, }; /* List of supported bluetooth devices */ static const STRUCT_USB_HOST_ID ubt_devs[] = { /* Generic Bluetooth class devices */ { USB_IFACE_CLASS(UDCLASS_WIRELESS), USB_IFACE_SUBCLASS(UDSUBCLASS_RF), USB_IFACE_PROTOCOL(UDPROTO_BLUETOOTH) }, /* AVM USB Bluetooth-Adapter BlueFritz! v2.0 */ { USB_VPI(USB_VENDOR_AVM, 0x3800, 0) }, /* Broadcom USB dongles, mostly BCM20702 and BCM20702A0 */ { USB_VENDOR(USB_VENDOR_BROADCOM), USB_IFACE_CLASS(UICLASS_VENDOR), USB_IFACE_SUBCLASS(UDSUBCLASS_RF), USB_IFACE_PROTOCOL(UDPROTO_BLUETOOTH) }, /* Apple-specific (Broadcom) devices */ { USB_VENDOR(USB_VENDOR_APPLE), USB_IFACE_CLASS(UICLASS_VENDOR), USB_IFACE_SUBCLASS(UDSUBCLASS_RF), USB_IFACE_PROTOCOL(UDPROTO_BLUETOOTH) }, /* Foxconn - Hon Hai */ { USB_VENDOR(USB_VENDOR_FOXCONN), USB_IFACE_CLASS(UICLASS_VENDOR), USB_IFACE_SUBCLASS(UDSUBCLASS_RF), USB_IFACE_PROTOCOL(UDPROTO_BLUETOOTH) }, /* MediaTek MT76x0E */ { USB_VPI(USB_VENDOR_MEDIATEK, 0x763f, 0) }, /* Broadcom SoftSailing reporting vendor specific */ { USB_VPI(USB_VENDOR_BROADCOM, 0x21e1, 0) }, /* Apple MacBookPro 7,1 */ { USB_VPI(USB_VENDOR_APPLE, 0x8213, 0) }, /* Apple iMac11,1 */ { USB_VPI(USB_VENDOR_APPLE, 0x8215, 0) }, /* Apple MacBookPro6,2 */ { USB_VPI(USB_VENDOR_APPLE, 0x8218, 0) }, /* Apple MacBookAir3,1, MacBookAir3,2 */ { USB_VPI(USB_VENDOR_APPLE, 0x821b, 0) }, /* Apple MacBookAir4,1 */ { USB_VPI(USB_VENDOR_APPLE, 0x821f, 0) }, /* MacBookAir6,1 */ { USB_VPI(USB_VENDOR_APPLE, 0x828f, 0) }, /* Apple MacBookPro8,2 */ { USB_VPI(USB_VENDOR_APPLE, 0x821a, 0) }, /* Apple MacMini5,1 */ { USB_VPI(USB_VENDOR_APPLE, 0x8281, 0) }, /* Bluetooth Ultraport Module from IBM */ { USB_VPI(USB_VENDOR_TDK, 0x030a, 0) }, /* ALPS Modules with non-standard ID */ { USB_VPI(USB_VENDOR_ALPS, 0x3001, 0) }, { USB_VPI(USB_VENDOR_ALPS, 0x3002, 0) }, { USB_VPI(USB_VENDOR_ERICSSON2, 0x1002, 0) }, /* Canyon CN-BTU1 with HID interfaces */ { USB_VPI(USB_VENDOR_CANYON, 0x0000, 0) }, /* Broadcom BCM20702A0 */ { USB_VPI(USB_VENDOR_ASUS, 0x17b5, 0) }, { USB_VPI(USB_VENDOR_ASUS, 0x17cb, 0) }, { USB_VPI(USB_VENDOR_LITEON, 0x2003, 0) }, { USB_VPI(USB_VENDOR_FOXCONN, 0xe042, 0) }, { USB_VPI(USB_VENDOR_DELL, 0x8197, 0) }, { USB_VPI(USB_VENDOR_BELKIN, 0x065a, 0) }, }; /* * Does a synchronous (waits for completion event) execution of HCI command. * Size of both command and response buffers are passed in length field of * corresponding structures in "Parameter Total Length" format i.e. * not including HCI packet headers. * * Must not be used after USB transfers have been configured in attach routine. */ usb_error_t ubt_do_hci_request(struct usb_device *udev, struct ubt_hci_cmd *cmd, void *evt, usb_timeout_t timeout) { static const struct usb_config ubt_probe_config = { .type = UE_INTERRUPT, .endpoint = UE_ADDR_ANY, .direction = UE_DIR_IN, .flags = { .pipe_bof = 1, .short_xfer_ok = 1 }, .bufsize = UBT_INTR_BUFFER_SIZE, .callback = &ubt_probe_intr_callback, }; struct usb_device_request req; struct usb_xfer *xfer[1]; struct mtx mtx; usb_error_t error = USB_ERR_NORMAL_COMPLETION; uint8_t iface_index = 0; /* Initialize a USB control request and then do it */ bzero(&req, sizeof(req)); req.bmRequestType = UBT_HCI_REQUEST; req.wIndex[0] = iface_index; USETW(req.wLength, UBT_HCI_CMD_SIZE(cmd)); error = usbd_do_request(udev, NULL, &req, cmd); if (error != USB_ERR_NORMAL_COMPLETION) { printf("ng_ubt: usbd_do_request error=%s\n", usbd_errstr(error)); return (error); } if (evt == NULL) return (USB_ERR_NORMAL_COMPLETION); /* Initialize INTR endpoint xfer and wait for response */ mtx_init(&mtx, "ubt pb", NULL, MTX_DEF | MTX_NEW); error = usbd_transfer_setup(udev, &iface_index, xfer, &ubt_probe_config, 1, evt, &mtx); if (error == USB_ERR_NORMAL_COMPLETION) { mtx_lock(&mtx); usbd_transfer_start(*xfer); if (msleep_sbt(evt, &mtx, 0, "ubt pb", SBT_1MS * timeout, 0, C_HARDCLOCK) == EWOULDBLOCK) { printf("ng_ubt: HCI command 0x%04x timed out\n", le16toh(cmd->opcode)); error = USB_ERR_TIMEOUT; } usbd_transfer_stop(*xfer); mtx_unlock(&mtx); usbd_transfer_unsetup(xfer, 1); } else printf("ng_ubt: usbd_transfer_setup error=%s\n", usbd_errstr(error)); mtx_destroy(&mtx); return (error); } /* * Probe for a USB Bluetooth device. * USB context. */ static int ubt_probe(device_t dev) { struct usb_attach_arg *uaa = device_get_ivars(dev); const struct usb_device_id *id; if (uaa->usb_mode != USB_MODE_HOST) return (ENXIO); if (usbd_lookup_id_by_uaa(ubt_ignore_devs, sizeof(ubt_ignore_devs), uaa) == 0) return (ENXIO); id = usbd_lookup_id_by_info(ubt_devs, sizeof(ubt_devs), &uaa->info); if (id == NULL) return (ENXIO); if (uaa->info.bIfaceIndex != 0) { /* make sure we are matching the interface */ if (id->match_flag_int_class && id->match_flag_int_subclass && id->match_flag_int_protocol) return (BUS_PROBE_GENERIC); else return (ENXIO); } else { return (BUS_PROBE_GENERIC); } } /* ubt_probe */ /* * Attach the device. * USB context. */ static int ubt_attach(device_t dev) { struct usb_attach_arg *uaa = device_get_ivars(dev); struct ubt_softc *sc = device_get_softc(dev); struct usb_endpoint_descriptor *ed; struct usb_interface_descriptor *id; struct usb_interface *iface[2]; uint32_t wMaxPacketSize; uint8_t alt_index, i, j; uint8_t iface_index[2]; device_set_usb_desc(dev); iface_index[0] = uaa->info.bIfaceIndex; iface_index[1] = uaa->info.bIfaceIndex + 1; iface[0] = usbd_get_iface(uaa->device, iface_index[0]); iface[1] = usbd_get_iface(uaa->device, iface_index[1]); sc->sc_dev = dev; sc->sc_debug = NG_UBT_WARN_LEVEL; /* * Sanity checks. */ if (iface[0] == NULL || iface[1] == NULL || iface[0]->idesc == NULL || iface[1]->idesc == NULL) { UBT_ALERT(sc, "could not get two interfaces\n"); return (ENXIO); } /* * Create Netgraph node */ if (ng_make_node_common(&typestruct, &sc->sc_node) != 0) { UBT_ALERT(sc, "could not create Netgraph node\n"); return (ENXIO); } /* Name Netgraph node */ if (ng_name_node(sc->sc_node, device_get_nameunit(dev)) != 0) { UBT_ALERT(sc, "could not name Netgraph node\n"); NG_NODE_UNREF(sc->sc_node); return (ENXIO); } NG_NODE_SET_PRIVATE(sc->sc_node, sc); NG_NODE_FORCE_WRITER(sc->sc_node); /* * Initialize device softc structure */ /* initialize locks */ mtx_init(&sc->sc_ng_mtx, "ubt ng", NULL, MTX_DEF); mtx_init(&sc->sc_if_mtx, "ubt if", NULL, MTX_DEF | MTX_RECURSE); /* initialize packet queues */ NG_BT_MBUFQ_INIT(&sc->sc_cmdq, UBT_DEFAULT_QLEN); NG_BT_MBUFQ_INIT(&sc->sc_aclq, UBT_DEFAULT_QLEN); NG_BT_MBUFQ_INIT(&sc->sc_scoq, UBT_DEFAULT_QLEN); /* initialize glue task */ TASK_INIT(&sc->sc_task, 0, ubt_task, sc); /* * Configure Bluetooth USB device. Discover all required USB * interfaces and endpoints. * * USB device must present two interfaces: * 1) Interface 0 that has 3 endpoints * 1) Interrupt endpoint to receive HCI events * 2) Bulk IN endpoint to receive ACL data * 3) Bulk OUT endpoint to send ACL data * * 2) Interface 1 then has 2 endpoints * 1) Isochronous IN endpoint to receive SCO data * 2) Isochronous OUT endpoint to send SCO data * * Interface 1 (with isochronous endpoints) has several alternate * configurations with different packet size. */ /* * For interface #1 search alternate settings, and find * the descriptor with the largest wMaxPacketSize */ wMaxPacketSize = 0; alt_index = 0; i = 0; j = 0; ed = NULL; /* * Search through all the descriptors looking for the largest * packet size: */ while ((ed = (struct usb_endpoint_descriptor *)usb_desc_foreach( usbd_get_config_descriptor(uaa->device), (struct usb_descriptor *)ed))) { if ((ed->bDescriptorType == UDESC_INTERFACE) && (ed->bLength >= sizeof(*id))) { id = (struct usb_interface_descriptor *)ed; i = (id->bInterfaceNumber == iface[1]->idesc->bInterfaceNumber); j = id->bAlternateSetting; } if ((ed->bDescriptorType == UDESC_ENDPOINT) && (ed->bLength >= sizeof(*ed)) && (i != 0)) { uint32_t temp; temp = usbd_get_max_frame_length( ed, NULL, usbd_get_speed(uaa->device)); if (temp > wMaxPacketSize) { wMaxPacketSize = temp; alt_index = j; } } } /* Set alt configuration on interface #1 only if we found it */ if (wMaxPacketSize > 0 && usbd_set_alt_interface_index(uaa->device, iface_index[1], alt_index)) { UBT_ALERT(sc, "could not set alternate setting %d " \ "for interface 1!\n", alt_index); goto detach; } /* Setup transfers for both interfaces */ if (usbd_transfer_setup(uaa->device, iface_index, sc->sc_xfer, ubt_config, ng_usb_isoc_enable ? UBT_N_TRANSFER : UBT_IF_1_ISOC_DT_RD1, sc, &sc->sc_if_mtx)) { UBT_ALERT(sc, "could not allocate transfers\n"); goto detach; } /* Claim second interface belonging to the Bluetooth part */ usbd_set_parent_iface(uaa->device, iface_index[1], uaa->info.bIfaceIndex); return (0); /* success */ detach: ubt_detach(dev); return (ENXIO); } /* ubt_attach */ /* * Detach the device. * USB context. */ int ubt_detach(device_t dev) { struct ubt_softc *sc = device_get_softc(dev); node_p node = sc->sc_node; /* Destroy Netgraph node */ if (node != NULL) { sc->sc_node = NULL; NG_NODE_REALLY_DIE(node); ng_rmnode_self(node); } /* Make sure ubt_task in gone */ taskqueue_drain(taskqueue_swi, &sc->sc_task); /* Free USB transfers, if any */ usbd_transfer_unsetup(sc->sc_xfer, UBT_N_TRANSFER); /* Destroy queues */ UBT_NG_LOCK(sc); NG_BT_MBUFQ_DESTROY(&sc->sc_cmdq); NG_BT_MBUFQ_DESTROY(&sc->sc_aclq); NG_BT_MBUFQ_DESTROY(&sc->sc_scoq); UBT_NG_UNLOCK(sc); mtx_destroy(&sc->sc_if_mtx); mtx_destroy(&sc->sc_ng_mtx); return (0); } /* ubt_detach */ /* * Called when incoming interrupt transfer (HCI event) has completed, i.e. * HCI event was received from the device during device probe stage. * USB context. */ static void ubt_probe_intr_callback(struct usb_xfer *xfer, usb_error_t error) { struct ubt_hci_event *evt = usbd_xfer_softc(xfer); struct usb_page_cache *pc; int actlen; usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL); switch (USB_GET_STATE(xfer)) { case USB_ST_TRANSFERRED: if (actlen > UBT_HCI_EVENT_SIZE(evt)) actlen = UBT_HCI_EVENT_SIZE(evt); pc = usbd_xfer_get_frame(xfer, 0); usbd_copy_out(pc, 0, evt, actlen); /* OneShot mode */ wakeup(evt); break; case USB_ST_SETUP: submit_next: usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); usbd_transfer_submit(xfer); break; default: if (error != USB_ERR_CANCELLED) { printf("ng_ubt: interrupt transfer failed: %s\n", usbd_errstr(error)); /* Try clear stall first */ usbd_xfer_set_stall(xfer); goto submit_next; } break; } } /* ubt_probe_intr_callback */ /* * Called when outgoing control request (HCI command) has completed, i.e. * HCI command was sent to the device. * USB context. */ static void ubt_ctrl_write_callback(struct usb_xfer *xfer, usb_error_t error) { struct ubt_softc *sc = usbd_xfer_softc(xfer); struct usb_device_request req; struct mbuf *m; struct usb_page_cache *pc; int actlen; usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL); switch (USB_GET_STATE(xfer)) { case USB_ST_TRANSFERRED: UBT_INFO(sc, "sent %d bytes to control pipe\n", actlen); UBT_STAT_BYTES_SENT(sc, actlen); UBT_STAT_PCKTS_SENT(sc); /* FALLTHROUGH */ case USB_ST_SETUP: send_next: /* Get next command mbuf, if any */ UBT_NG_LOCK(sc); NG_BT_MBUFQ_DEQUEUE(&sc->sc_cmdq, m); UBT_NG_UNLOCK(sc); if (m == NULL) { UBT_INFO(sc, "HCI command queue is empty\n"); break; /* transfer complete */ } /* Initialize a USB control request and then schedule it */ bzero(&req, sizeof(req)); req.bmRequestType = UBT_HCI_REQUEST; USETW(req.wLength, m->m_pkthdr.len); UBT_INFO(sc, "Sending control request, " \ "bmRequestType=0x%02x, wLength=%d\n", req.bmRequestType, UGETW(req.wLength)); pc = usbd_xfer_get_frame(xfer, 0); usbd_copy_in(pc, 0, &req, sizeof(req)); pc = usbd_xfer_get_frame(xfer, 1); usbd_m_copy_in(pc, 0, m, 0, m->m_pkthdr.len); usbd_xfer_set_frame_len(xfer, 0, sizeof(req)); usbd_xfer_set_frame_len(xfer, 1, m->m_pkthdr.len); usbd_xfer_set_frames(xfer, 2); NG_FREE_M(m); usbd_transfer_submit(xfer); break; default: /* Error */ if (error != USB_ERR_CANCELLED) { UBT_WARN(sc, "control transfer failed: %s\n", usbd_errstr(error)); UBT_STAT_OERROR(sc); goto send_next; } /* transfer cancelled */ break; } } /* ubt_ctrl_write_callback */ /* * Called when incoming interrupt transfer (HCI event) has completed, i.e. * HCI event was received from the device. * USB context. */ static void ubt_intr_read_callback(struct usb_xfer *xfer, usb_error_t error) { struct ubt_softc *sc = usbd_xfer_softc(xfer); struct mbuf *m; ng_hci_event_pkt_t *hdr; struct usb_page_cache *pc; int actlen; usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL); m = NULL; switch (USB_GET_STATE(xfer)) { case USB_ST_TRANSFERRED: /* Allocate a new mbuf */ MGETHDR(m, M_NOWAIT, MT_DATA); if (m == NULL) { UBT_STAT_IERROR(sc); goto submit_next; } if (!(MCLGET(m, M_NOWAIT))) { UBT_STAT_IERROR(sc); goto submit_next; } /* Add HCI packet type */ *mtod(m, uint8_t *)= NG_HCI_EVENT_PKT; m->m_pkthdr.len = m->m_len = 1; if (actlen > MCLBYTES - 1) actlen = MCLBYTES - 1; pc = usbd_xfer_get_frame(xfer, 0); usbd_copy_out(pc, 0, mtod(m, uint8_t *) + 1, actlen); m->m_pkthdr.len += actlen; m->m_len += actlen; UBT_INFO(sc, "got %d bytes from interrupt pipe\n", actlen); /* Validate packet and send it up the stack */ if (m->m_pkthdr.len < (int)sizeof(*hdr)) { UBT_INFO(sc, "HCI event packet is too short\n"); UBT_STAT_IERROR(sc); goto submit_next; } hdr = mtod(m, ng_hci_event_pkt_t *); if (hdr->length != (m->m_pkthdr.len - sizeof(*hdr))) { UBT_ERR(sc, "Invalid HCI event packet size, " \ "length=%d, pktlen=%d\n", hdr->length, m->m_pkthdr.len); UBT_STAT_IERROR(sc); goto submit_next; } UBT_INFO(sc, "got complete HCI event frame, pktlen=%d, " \ "length=%d\n", m->m_pkthdr.len, hdr->length); UBT_STAT_PCKTS_RECV(sc); UBT_STAT_BYTES_RECV(sc, m->m_pkthdr.len); ubt_fwd_mbuf_up(sc, &m); /* m == NULL at this point */ /* FALLTHROUGH */ case USB_ST_SETUP: submit_next: NG_FREE_M(m); /* checks for m != NULL */ usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); usbd_transfer_submit(xfer); break; default: /* Error */ if (error != USB_ERR_CANCELLED) { UBT_WARN(sc, "interrupt transfer failed: %s\n", usbd_errstr(error)); /* Try to clear stall first */ usbd_xfer_set_stall(xfer); goto submit_next; } /* transfer cancelled */ break; } } /* ubt_intr_read_callback */ /* * Called when incoming bulk transfer (ACL packet) has completed, i.e. * ACL packet was received from the device. * USB context. */ static void ubt_bulk_read_callback(struct usb_xfer *xfer, usb_error_t error) { struct ubt_softc *sc = usbd_xfer_softc(xfer); struct mbuf *m; ng_hci_acldata_pkt_t *hdr; struct usb_page_cache *pc; int len; int actlen; usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL); m = NULL; switch (USB_GET_STATE(xfer)) { case USB_ST_TRANSFERRED: /* Allocate new mbuf */ MGETHDR(m, M_NOWAIT, MT_DATA); if (m == NULL) { UBT_STAT_IERROR(sc); goto submit_next; } if (!(MCLGET(m, M_NOWAIT))) { UBT_STAT_IERROR(sc); goto submit_next; } /* Add HCI packet type */ *mtod(m, uint8_t *)= NG_HCI_ACL_DATA_PKT; m->m_pkthdr.len = m->m_len = 1; if (actlen > MCLBYTES - 1) actlen = MCLBYTES - 1; pc = usbd_xfer_get_frame(xfer, 0); usbd_copy_out(pc, 0, mtod(m, uint8_t *) + 1, actlen); m->m_pkthdr.len += actlen; m->m_len += actlen; UBT_INFO(sc, "got %d bytes from bulk-in pipe\n", actlen); /* Validate packet and send it up the stack */ if (m->m_pkthdr.len < (int)sizeof(*hdr)) { UBT_INFO(sc, "HCI ACL packet is too short\n"); UBT_STAT_IERROR(sc); goto submit_next; } hdr = mtod(m, ng_hci_acldata_pkt_t *); len = le16toh(hdr->length); if (len != (int)(m->m_pkthdr.len - sizeof(*hdr))) { UBT_ERR(sc, "Invalid ACL packet size, length=%d, " \ "pktlen=%d\n", len, m->m_pkthdr.len); UBT_STAT_IERROR(sc); goto submit_next; } UBT_INFO(sc, "got complete ACL data packet, pktlen=%d, " \ "length=%d\n", m->m_pkthdr.len, len); UBT_STAT_PCKTS_RECV(sc); UBT_STAT_BYTES_RECV(sc, m->m_pkthdr.len); ubt_fwd_mbuf_up(sc, &m); /* m == NULL at this point */ /* FALLTHOUGH */ case USB_ST_SETUP: submit_next: NG_FREE_M(m); /* checks for m != NULL */ usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); usbd_transfer_submit(xfer); break; default: /* Error */ if (error != USB_ERR_CANCELLED) { UBT_WARN(sc, "bulk-in transfer failed: %s\n", usbd_errstr(error)); /* Try to clear stall first */ usbd_xfer_set_stall(xfer); goto submit_next; } /* transfer cancelled */ break; } } /* ubt_bulk_read_callback */ /* * Called when outgoing bulk transfer (ACL packet) has completed, i.e. * ACL packet was sent to the device. * USB context. */ static void ubt_bulk_write_callback(struct usb_xfer *xfer, usb_error_t error) { struct ubt_softc *sc = usbd_xfer_softc(xfer); struct mbuf *m; struct usb_page_cache *pc; int actlen; usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL); switch (USB_GET_STATE(xfer)) { case USB_ST_TRANSFERRED: UBT_INFO(sc, "sent %d bytes to bulk-out pipe\n", actlen); UBT_STAT_BYTES_SENT(sc, actlen); UBT_STAT_PCKTS_SENT(sc); /* FALLTHROUGH */ case USB_ST_SETUP: send_next: /* Get next mbuf, if any */ UBT_NG_LOCK(sc); NG_BT_MBUFQ_DEQUEUE(&sc->sc_aclq, m); UBT_NG_UNLOCK(sc); if (m == NULL) { UBT_INFO(sc, "ACL data queue is empty\n"); break; /* transfer completed */ } /* * Copy ACL data frame back to a linear USB transfer buffer * and schedule transfer */ pc = usbd_xfer_get_frame(xfer, 0); usbd_m_copy_in(pc, 0, m, 0, m->m_pkthdr.len); usbd_xfer_set_frame_len(xfer, 0, m->m_pkthdr.len); UBT_INFO(sc, "bulk-out transfer has been started, len=%d\n", m->m_pkthdr.len); NG_FREE_M(m); usbd_transfer_submit(xfer); break; default: /* Error */ if (error != USB_ERR_CANCELLED) { UBT_WARN(sc, "bulk-out transfer failed: %s\n", usbd_errstr(error)); UBT_STAT_OERROR(sc); /* try to clear stall first */ usbd_xfer_set_stall(xfer); goto send_next; } /* transfer cancelled */ break; } } /* ubt_bulk_write_callback */ /* * Called when incoming isoc transfer (SCO packet) has completed, i.e. * SCO packet was received from the device. * USB context. */ static void ubt_isoc_read_callback(struct usb_xfer *xfer, usb_error_t error) { struct ubt_softc *sc = usbd_xfer_softc(xfer); int n; int actlen, nframes; usbd_xfer_status(xfer, &actlen, NULL, NULL, &nframes); switch (USB_GET_STATE(xfer)) { case USB_ST_TRANSFERRED: for (n = 0; n < nframes; n ++) if (ubt_isoc_read_one_frame(xfer, n) < 0) break; /* FALLTHROUGH */ case USB_ST_SETUP: read_next: for (n = 0; n < nframes; n ++) usbd_xfer_set_frame_len(xfer, n, usbd_xfer_max_framelen(xfer)); usbd_transfer_submit(xfer); break; default: /* Error */ if (error != USB_ERR_CANCELLED) { UBT_STAT_IERROR(sc); goto read_next; } /* transfer cancelled */ break; } } /* ubt_isoc_read_callback */ /* * Helper function. Called from ubt_isoc_read_callback() to read * SCO data from one frame. * USB context. */ static int ubt_isoc_read_one_frame(struct usb_xfer *xfer, int frame_no) { struct ubt_softc *sc = usbd_xfer_softc(xfer); struct usb_page_cache *pc; struct mbuf *m; int len, want, got, total; /* Get existing SCO reassembly buffer */ pc = usbd_xfer_get_frame(xfer, 0); m = sc->sc_isoc_in_buffer; total = usbd_xfer_frame_len(xfer, frame_no); /* While we have data in the frame */ while (total > 0) { if (m == NULL) { /* Start new reassembly buffer */ MGETHDR(m, M_NOWAIT, MT_DATA); if (m == NULL) { UBT_STAT_IERROR(sc); return (-1); /* XXX out of sync! */ } if (!(MCLGET(m, M_NOWAIT))) { UBT_STAT_IERROR(sc); NG_FREE_M(m); return (-1); /* XXX out of sync! */ } /* Expect SCO header */ *mtod(m, uint8_t *) = NG_HCI_SCO_DATA_PKT; m->m_pkthdr.len = m->m_len = got = 1; want = sizeof(ng_hci_scodata_pkt_t); } else { /* * Check if we have SCO header and if so * adjust amount of data we want */ got = m->m_pkthdr.len; want = sizeof(ng_hci_scodata_pkt_t); if (got >= want) want += mtod(m, ng_hci_scodata_pkt_t *)->length; } /* Append frame data to the SCO reassembly buffer */ len = total; if (got + len > want) len = want - got; usbd_copy_out(pc, frame_no * usbd_xfer_max_framelen(xfer), mtod(m, uint8_t *) + m->m_pkthdr.len, len); m->m_pkthdr.len += len; m->m_len += len; total -= len; /* Check if we got everything we wanted, if not - continue */ if (got != want) continue; /* If we got here then we got complete SCO frame */ UBT_INFO(sc, "got complete SCO data frame, pktlen=%d, " \ "length=%d\n", m->m_pkthdr.len, mtod(m, ng_hci_scodata_pkt_t *)->length); UBT_STAT_PCKTS_RECV(sc); UBT_STAT_BYTES_RECV(sc, m->m_pkthdr.len); ubt_fwd_mbuf_up(sc, &m); /* m == NULL at this point */ } /* Put SCO reassembly buffer back */ sc->sc_isoc_in_buffer = m; return (0); } /* ubt_isoc_read_one_frame */ /* * Called when outgoing isoc transfer (SCO packet) has completed, i.e. * SCO packet was sent to the device. * USB context. */ static void ubt_isoc_write_callback(struct usb_xfer *xfer, usb_error_t error) { struct ubt_softc *sc = usbd_xfer_softc(xfer); struct usb_page_cache *pc; struct mbuf *m; int n, space, offset; int actlen, nframes; usbd_xfer_status(xfer, &actlen, NULL, NULL, &nframes); pc = usbd_xfer_get_frame(xfer, 0); switch (USB_GET_STATE(xfer)) { case USB_ST_TRANSFERRED: UBT_INFO(sc, "sent %d bytes to isoc-out pipe\n", actlen); UBT_STAT_BYTES_SENT(sc, actlen); UBT_STAT_PCKTS_SENT(sc); /* FALLTHROUGH */ case USB_ST_SETUP: send_next: offset = 0; space = usbd_xfer_max_framelen(xfer) * nframes; m = NULL; while (space > 0) { if (m == NULL) { UBT_NG_LOCK(sc); NG_BT_MBUFQ_DEQUEUE(&sc->sc_scoq, m); UBT_NG_UNLOCK(sc); if (m == NULL) break; } n = min(space, m->m_pkthdr.len); if (n > 0) { usbd_m_copy_in(pc, offset, m,0, n); m_adj(m, n); offset += n; space -= n; } if (m->m_pkthdr.len == 0) NG_FREE_M(m); /* sets m = NULL */ } /* Put whatever is left from mbuf back on queue */ if (m != NULL) { UBT_NG_LOCK(sc); NG_BT_MBUFQ_PREPEND(&sc->sc_scoq, m); UBT_NG_UNLOCK(sc); } /* * Calculate sizes for isoc frames. * Note that offset could be 0 at this point (i.e. we have * nothing to send). That is fine, as we have isoc. transfers * going in both directions all the time. In this case it * would be just empty isoc. transfer. */ for (n = 0; n < nframes; n ++) { usbd_xfer_set_frame_len(xfer, n, min(offset, usbd_xfer_max_framelen(xfer))); offset -= usbd_xfer_frame_len(xfer, n); } usbd_transfer_submit(xfer); break; default: /* Error */ if (error != USB_ERR_CANCELLED) { UBT_STAT_OERROR(sc); goto send_next; } /* transfer cancelled */ break; } } /* * Utility function to forward provided mbuf upstream (i.e. up the stack). * Modifies value of the mbuf pointer (sets it to NULL). * Save to call from any context. */ static int ubt_fwd_mbuf_up(ubt_softc_p sc, struct mbuf **m) { hook_p hook; int error; /* * Close the race with Netgraph hook newhook/disconnect methods. * Save the hook pointer atomically. Two cases are possible: * * 1) The hook pointer is NULL. It means disconnect method got * there first. In this case we are done. * * 2) The hook pointer is not NULL. It means that hook pointer * could be either in valid or invalid (i.e. in the process * of disconnect) state. In any case grab an extra reference * to protect the hook pointer. * * It is ok to pass hook in invalid state to NG_SEND_DATA_ONLY() as * it checks for it. Drop extra reference after NG_SEND_DATA_ONLY(). */ UBT_NG_LOCK(sc); if ((hook = sc->sc_hook) != NULL) NG_HOOK_REF(hook); UBT_NG_UNLOCK(sc); if (hook == NULL) { NG_FREE_M(*m); return (ENETDOWN); } NG_SEND_DATA_ONLY(error, hook, *m); NG_HOOK_UNREF(hook); if (error != 0) UBT_STAT_IERROR(sc); return (error); } /* ubt_fwd_mbuf_up */ /**************************************************************************** **************************************************************************** ** Glue **************************************************************************** ****************************************************************************/ /* * Schedule glue task. Should be called with sc_ng_mtx held. * Netgraph context. */ static void ubt_task_schedule(ubt_softc_p sc, int action) { mtx_assert(&sc->sc_ng_mtx, MA_OWNED); /* * Try to handle corner case when "start all" and "stop all" * actions can both be set before task is executed. * * The rules are * * sc_task_flags action new sc_task_flags * ------------------------------------------------------ * 0 start start * 0 stop stop * start start start * start stop stop * stop start stop|start * stop stop stop * stop|start start stop|start * stop|start stop stop */ if (action != 0) { if ((action & UBT_FLAG_T_STOP_ALL) != 0) sc->sc_task_flags &= ~UBT_FLAG_T_START_ALL; sc->sc_task_flags |= action; } if (sc->sc_task_flags & UBT_FLAG_T_PENDING) return; if (taskqueue_enqueue(taskqueue_swi, &sc->sc_task) == 0) { sc->sc_task_flags |= UBT_FLAG_T_PENDING; return; } /* XXX: i think this should never happen */ } /* ubt_task_schedule */ /* * Glue task. Examines sc_task_flags and does things depending on it. * Taskqueue context. */ static void ubt_task(void *context, int pending) { ubt_softc_p sc = context; int task_flags, i; UBT_NG_LOCK(sc); task_flags = sc->sc_task_flags; sc->sc_task_flags = 0; UBT_NG_UNLOCK(sc); /* * Stop all USB transfers synchronously. * Stop interface #0 and #1 transfers at the same time and in the * same loop. usbd_transfer_drain() will do appropriate locking. */ if (task_flags & UBT_FLAG_T_STOP_ALL) for (i = 0; i < UBT_N_TRANSFER; i ++) usbd_transfer_drain(sc->sc_xfer[i]); /* Start incoming interrupt and bulk, and all isoc. USB transfers */ if (task_flags & UBT_FLAG_T_START_ALL) { /* * Interface #0 */ mtx_lock(&sc->sc_if_mtx); ubt_xfer_start(sc, UBT_IF_0_INTR_DT_RD); ubt_xfer_start(sc, UBT_IF_0_BULK_DT_RD); /* * Interface #1 * Start both read and write isoc. transfers by default. * Get them going all the time even if we have nothing * to send to avoid any delays. */ ubt_xfer_start(sc, UBT_IF_1_ISOC_DT_RD1); ubt_xfer_start(sc, UBT_IF_1_ISOC_DT_RD2); ubt_xfer_start(sc, UBT_IF_1_ISOC_DT_WR1); ubt_xfer_start(sc, UBT_IF_1_ISOC_DT_WR2); mtx_unlock(&sc->sc_if_mtx); } /* Start outgoing control transfer */ if (task_flags & UBT_FLAG_T_START_CTRL) { mtx_lock(&sc->sc_if_mtx); ubt_xfer_start(sc, UBT_IF_0_CTRL_DT_WR); mtx_unlock(&sc->sc_if_mtx); } /* Start outgoing bulk transfer */ if (task_flags & UBT_FLAG_T_START_BULK) { mtx_lock(&sc->sc_if_mtx); ubt_xfer_start(sc, UBT_IF_0_BULK_DT_WR); mtx_unlock(&sc->sc_if_mtx); } } /* ubt_task */ /**************************************************************************** **************************************************************************** ** Netgraph specific **************************************************************************** ****************************************************************************/ /* * Netgraph node constructor. Do not allow to create node of this type. * Netgraph context. */ static int ng_ubt_constructor(node_p node) { return (EINVAL); } /* ng_ubt_constructor */ /* * Netgraph node destructor. Destroy node only when device has been detached. * Netgraph context. */ static int ng_ubt_shutdown(node_p node) { if (node->nd_flags & NGF_REALLY_DIE) { /* * We came here because the USB device is being * detached, so stop being persistent. */ NG_NODE_SET_PRIVATE(node, NULL); NG_NODE_UNREF(node); } else NG_NODE_REVIVE(node); /* tell ng_rmnode we are persisant */ return (0); } /* ng_ubt_shutdown */ /* * Create new hook. There can only be one. * Netgraph context. */ static int ng_ubt_newhook(node_p node, hook_p hook, char const *name) { struct ubt_softc *sc = NG_NODE_PRIVATE(node); if (strcmp(name, NG_UBT_HOOK) != 0) return (EINVAL); UBT_NG_LOCK(sc); if (sc->sc_hook != NULL) { UBT_NG_UNLOCK(sc); return (EISCONN); } sc->sc_hook = hook; UBT_NG_UNLOCK(sc); return (0); } /* ng_ubt_newhook */ /* * Connect hook. Start incoming USB transfers. * Netgraph context. */ static int ng_ubt_connect(hook_p hook) { struct ubt_softc *sc = NG_NODE_PRIVATE(NG_HOOK_NODE(hook)); NG_HOOK_FORCE_QUEUE(NG_HOOK_PEER(hook)); UBT_NG_LOCK(sc); ubt_task_schedule(sc, UBT_FLAG_T_START_ALL); UBT_NG_UNLOCK(sc); return (0); } /* ng_ubt_connect */ /* * Disconnect hook. * Netgraph context. */ static int ng_ubt_disconnect(hook_p hook) { struct ubt_softc *sc = NG_NODE_PRIVATE(NG_HOOK_NODE(hook)); UBT_NG_LOCK(sc); if (hook != sc->sc_hook) { UBT_NG_UNLOCK(sc); return (EINVAL); } sc->sc_hook = NULL; /* Kick off task to stop all USB xfers */ ubt_task_schedule(sc, UBT_FLAG_T_STOP_ALL); /* Drain queues */ NG_BT_MBUFQ_DRAIN(&sc->sc_cmdq); NG_BT_MBUFQ_DRAIN(&sc->sc_aclq); NG_BT_MBUFQ_DRAIN(&sc->sc_scoq); UBT_NG_UNLOCK(sc); return (0); } /* ng_ubt_disconnect */ /* * Process control message. * Netgraph context. */ static int ng_ubt_rcvmsg(node_p node, item_p item, hook_p lasthook) { struct ubt_softc *sc = NG_NODE_PRIVATE(node); struct ng_mesg *msg, *rsp = NULL; struct ng_bt_mbufq *q; int error = 0, queue, qlen; NGI_GET_MSG(item, msg); switch (msg->header.typecookie) { case NGM_GENERIC_COOKIE: switch (msg->header.cmd) { case NGM_TEXT_STATUS: NG_MKRESPONSE(rsp, msg, NG_TEXTRESPONSE, M_NOWAIT); if (rsp == NULL) { error = ENOMEM; break; } snprintf(rsp->data, NG_TEXTRESPONSE, "Hook: %s\n" \ "Task flags: %#x\n" \ "Debug: %d\n" \ "CMD queue: [have:%d,max:%d]\n" \ "ACL queue: [have:%d,max:%d]\n" \ "SCO queue: [have:%d,max:%d]", (sc->sc_hook != NULL) ? NG_UBT_HOOK : "", sc->sc_task_flags, sc->sc_debug, sc->sc_cmdq.len, sc->sc_cmdq.maxlen, sc->sc_aclq.len, sc->sc_aclq.maxlen, sc->sc_scoq.len, sc->sc_scoq.maxlen); break; default: error = EINVAL; break; } break; case NGM_UBT_COOKIE: switch (msg->header.cmd) { case NGM_UBT_NODE_SET_DEBUG: if (msg->header.arglen != sizeof(ng_ubt_node_debug_ep)){ error = EMSGSIZE; break; } sc->sc_debug = *((ng_ubt_node_debug_ep *) (msg->data)); break; case NGM_UBT_NODE_GET_DEBUG: NG_MKRESPONSE(rsp, msg, sizeof(ng_ubt_node_debug_ep), M_NOWAIT); if (rsp == NULL) { error = ENOMEM; break; } *((ng_ubt_node_debug_ep *) (rsp->data)) = sc->sc_debug; break; case NGM_UBT_NODE_SET_QLEN: if (msg->header.arglen != sizeof(ng_ubt_node_qlen_ep)) { error = EMSGSIZE; break; } queue = ((ng_ubt_node_qlen_ep *) (msg->data))->queue; qlen = ((ng_ubt_node_qlen_ep *) (msg->data))->qlen; switch (queue) { case NGM_UBT_NODE_QUEUE_CMD: q = &sc->sc_cmdq; break; case NGM_UBT_NODE_QUEUE_ACL: q = &sc->sc_aclq; break; case NGM_UBT_NODE_QUEUE_SCO: q = &sc->sc_scoq; break; default: error = EINVAL; goto done; /* NOT REACHED */ } q->maxlen = qlen; break; case NGM_UBT_NODE_GET_QLEN: if (msg->header.arglen != sizeof(ng_ubt_node_qlen_ep)) { error = EMSGSIZE; break; } queue = ((ng_ubt_node_qlen_ep *) (msg->data))->queue; switch (queue) { case NGM_UBT_NODE_QUEUE_CMD: q = &sc->sc_cmdq; break; case NGM_UBT_NODE_QUEUE_ACL: q = &sc->sc_aclq; break; case NGM_UBT_NODE_QUEUE_SCO: q = &sc->sc_scoq; break; default: error = EINVAL; goto done; /* NOT REACHED */ } NG_MKRESPONSE(rsp, msg, sizeof(ng_ubt_node_qlen_ep), M_NOWAIT); if (rsp == NULL) { error = ENOMEM; break; } ((ng_ubt_node_qlen_ep *) (rsp->data))->queue = queue; ((ng_ubt_node_qlen_ep *) (rsp->data))->qlen = q->maxlen; break; case NGM_UBT_NODE_GET_STAT: NG_MKRESPONSE(rsp, msg, sizeof(ng_ubt_node_stat_ep), M_NOWAIT); if (rsp == NULL) { error = ENOMEM; break; } bcopy(&sc->sc_stat, rsp->data, sizeof(ng_ubt_node_stat_ep)); break; case NGM_UBT_NODE_RESET_STAT: UBT_STAT_RESET(sc); break; default: error = EINVAL; break; } break; default: error = EINVAL; break; } done: NG_RESPOND_MSG(error, node, item, rsp); NG_FREE_MSG(msg); return (error); } /* ng_ubt_rcvmsg */ /* * Process data. * Netgraph context. */ static int ng_ubt_rcvdata(hook_p hook, item_p item) { struct ubt_softc *sc = NG_NODE_PRIVATE(NG_HOOK_NODE(hook)); struct mbuf *m; struct ng_bt_mbufq *q; int action, error = 0; if (hook != sc->sc_hook) { error = EINVAL; goto done; } /* Deatch mbuf and get HCI frame type */ NGI_GET_M(item, m); /* * Minimal size of the HCI frame is 4 bytes: 1 byte frame type, * 2 bytes connection handle and at least 1 byte of length. * Panic on data frame that has size smaller than 4 bytes (it * should not happen) */ if (m->m_pkthdr.len < 4) panic("HCI frame size is too small! pktlen=%d\n", m->m_pkthdr.len); /* Process HCI frame */ switch (*mtod(m, uint8_t *)) { /* XXX call m_pullup ? */ case NG_HCI_CMD_PKT: if (m->m_pkthdr.len - 1 > (int)UBT_CTRL_BUFFER_SIZE) panic("HCI command frame size is too big! " \ "buffer size=%zd, packet len=%d\n", UBT_CTRL_BUFFER_SIZE, m->m_pkthdr.len); q = &sc->sc_cmdq; action = UBT_FLAG_T_START_CTRL; break; case NG_HCI_ACL_DATA_PKT: if (m->m_pkthdr.len - 1 > UBT_BULK_WRITE_BUFFER_SIZE) panic("ACL data frame size is too big! " \ "buffer size=%d, packet len=%d\n", UBT_BULK_WRITE_BUFFER_SIZE, m->m_pkthdr.len); q = &sc->sc_aclq; action = UBT_FLAG_T_START_BULK; break; case NG_HCI_SCO_DATA_PKT: q = &sc->sc_scoq; action = 0; break; default: UBT_ERR(sc, "Dropping unsupported HCI frame, type=0x%02x, " \ "pktlen=%d\n", *mtod(m, uint8_t *), m->m_pkthdr.len); NG_FREE_M(m); error = EINVAL; goto done; /* NOT REACHED */ } UBT_NG_LOCK(sc); if (NG_BT_MBUFQ_FULL(q)) { NG_BT_MBUFQ_DROP(q); UBT_NG_UNLOCK(sc); UBT_ERR(sc, "Dropping HCI frame 0x%02x, len=%d. Queue full\n", *mtod(m, uint8_t *), m->m_pkthdr.len); NG_FREE_M(m); } else { /* Loose HCI packet type, enqueue mbuf and kick off task */ m_adj(m, sizeof(uint8_t)); NG_BT_MBUFQ_ENQUEUE(q, m); ubt_task_schedule(sc, action); UBT_NG_UNLOCK(sc); } done: NG_FREE_ITEM(item); return (error); } /* ng_ubt_rcvdata */ /**************************************************************************** **************************************************************************** ** Module **************************************************************************** ****************************************************************************/ /* * Load/Unload the driver module */ static int ubt_modevent(module_t mod, int event, void *data) { int error; switch (event) { case MOD_LOAD: error = ng_newtype(&typestruct); if (error != 0) printf("%s: Could not register Netgraph node type, " \ "error=%d\n", NG_UBT_NODE_TYPE, error); break; case MOD_UNLOAD: error = ng_rmtype(&typestruct); break; default: error = EOPNOTSUPP; break; } return (error); } /* ubt_modevent */ static device_method_t ubt_methods[] = { DEVMETHOD(device_probe, ubt_probe), DEVMETHOD(device_attach, ubt_attach), DEVMETHOD(device_detach, ubt_detach), DEVMETHOD_END }; driver_t ubt_driver = { .name = "ubt", .methods = ubt_methods, .size = sizeof(struct ubt_softc), }; DRIVER_MODULE(ng_ubt, uhub, ubt_driver, ubt_modevent, 0); MODULE_VERSION(ng_ubt, NG_BLUETOOTH_VERSION); MODULE_DEPEND(ng_ubt, netgraph, NG_ABI_VERSION, NG_ABI_VERSION, NG_ABI_VERSION); MODULE_DEPEND(ng_ubt, ng_hci, NG_BLUETOOTH_VERSION, NG_BLUETOOTH_VERSION, NG_BLUETOOTH_VERSION); MODULE_DEPEND(ng_ubt, ng_bluetooth, NG_BLUETOOTH_VERSION, NG_BLUETOOTH_VERSION, NG_BLUETOOTH_VERSION); MODULE_DEPEND(ng_ubt, usb, 1, 1, 1); USB_PNP_HOST_INFO(ubt_devs);