/*
 * P2041RDB Device Tree Source
 *
 * Copyright 2011 Freescale Semiconductor Inc.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in the
 *       documentation and/or other materials provided with the distribution.
 *     * Neither the name of Freescale Semiconductor nor the
 *       names of its contributors may be used to endorse or promote products
 *       derived from this software without specific prior written permission.
 *
 *
 * ALTERNATIVELY, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") as published by the Free Software
 * Foundation, either version 2 of that License or (at your option) any
 * later version.
 *
 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/include/ "p2041si.dtsi"

/ {
	model = "fsl,P2041RDB";
	compatible = "fsl,P2041RDB";
	#address-cells = <2>;
	#size-cells = <2>;
	interrupt-parent = <&mpic>;

	aliases {
		phy_rgmii_0 = &phy_rgmii_0;
		phy_rgmii_1 = &phy_rgmii_1;
		phy_sgmii_2 = &phy_sgmii_2;
		phy_sgmii_3 = &phy_sgmii_3;
		phy_sgmii_4 = &phy_sgmii_4;
		phy_sgmii_1c = &phy_sgmii_1c;
		phy_sgmii_1d = &phy_sgmii_1d;
		phy_sgmii_1e = &phy_sgmii_1e;
		phy_sgmii_1f = &phy_sgmii_1f;
		phy_xgmii_2 = &phy_xgmii_2;
	};

	memory {
		device_type = "memory";
		reg = <0x00000000 0x00000000 0x00000000 0x80000000>;
	};

	dcsr: dcsr@f00000000 {
		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
	};

	bman-portals@ff4000000 {
		bman-portal@0 {
			cpu-handle = <&cpu0>;
		};
		bman-portal@4000 {
			cpu-handle = <&cpu1>;
		};
		bman-portal@8000 {
			cpu-handle = <&cpu2>;
		};
		bman-portal@c000 {
			cpu-handle = <&cpu3>;
		};
		bman-portal@10000 {
		};
		bman-portal@14000 {
		};
		bman-portal@18000 {
		};
		bman-portal@1c000 {
		};
		bman-portal@20000 {
		};
		bman-portal@24000 {
		};

		buffer-pool@0 {
			compatible = "fsl,p2041-bpool", "fsl,bpool";
			fsl,bpid = <0>;
			fsl,bpool-cfg = <0 0x100 0 1 0 0x100>;
		};
	};

	qman-portals@ff4200000 {
		qportal0: qman-portal@0 {
			cpu-handle = <&cpu0>;
			fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3
						  &qpool4 &qpool5 &qpool6
						  &qpool7 &qpool8 &qpool9
						  &qpool10 &qpool11 &qpool12
						  &qpool13 &qpool14 &qpool15>;
		};

		qportal1: qman-portal@4000 {
			cpu-handle = <&cpu1>;
			fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3
						  &qpool4 &qpool5 &qpool6
						  &qpool7 &qpool8 &qpool9
						  &qpool10 &qpool11 &qpool12
						  &qpool13 &qpool14 &qpool15>;
		};

		qportal2: qman-portal@8000 {
			cpu-handle = <&cpu2>;
			fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3
						  &qpool4 &qpool5 &qpool6
						  &qpool7 &qpool8 &qpool9
						  &qpool10 &qpool11 &qpool12
						  &qpool13 &qpool14 &qpool15>;
		};

		qportal3: qman-portal@c000 {
			cpu-handle = <&cpu3>;
			fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3
						  &qpool4 &qpool5 &qpool6
						  &qpool7 &qpool8 &qpool9
						  &qpool10 &qpool11 &qpool12
						  &qpool13 &qpool14 &qpool15>;
		};

		qportal4: qman-portal@10000 {
			fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3
						  &qpool4 &qpool5 &qpool6
						  &qpool7 &qpool8 &qpool9
						  &qpool10 &qpool11 &qpool12
						  &qpool13 &qpool14 &qpool15>;
		};

		qportal5: qman-portal@14000 {
			fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3
						  &qpool4 &qpool5 &qpool6
						  &qpool7 &qpool8 &qpool9
						  &qpool10 &qpool11 &qpool12
						  &qpool13 &qpool14 &qpool15>;
		};

		qportal6: qman-portal@18000 {
			fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3
						  &qpool4 &qpool5 &qpool6
						  &qpool7 &qpool8 &qpool9
						  &qpool10 &qpool11 &qpool12
						  &qpool13 &qpool14 &qpool15>;
		};

		qportal7: qman-portal@1c000 {
			fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3
						  &qpool4 &qpool5 &qpool6
						  &qpool7 &qpool8 &qpool9
						  &qpool10 &qpool11 &qpool12
						  &qpool13 &qpool14 &qpool15>;
		};

		qportal8: qman-portal@20000 {
			fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3
						  &qpool4 &qpool5 &qpool6
						  &qpool7 &qpool8 &qpool9
						  &qpool10 &qpool11 &qpool12
						  &qpool13 &qpool14 &qpool15>;
		};

		qportal9: qman-portal@24000 {
			fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3
						  &qpool4 &qpool5 &qpool6
						  &qpool7 &qpool8 &qpool9
						  &qpool10 &qpool11 &qpool12
						  &qpool13 &qpool14 &qpool15>;
		};
	};

	soc: soc@ffe000000 {
		spi@110000 {
			flash@0 {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "spansion,s25sl12801";
				reg = <0>;
				spi-max-frequency = <40000000>; /* input clock */
				partition@u-boot {
					label = "u-boot";
					reg = <0x00000000 0x00100000>;
					read-only;
				};
				partition@kernel {
					label = "kernel";
					reg = <0x00100000 0x00500000>;
					read-only;
				};
				partition@dtb {
					label = "dtb";
					reg = <0x00600000 0x00100000>;
					read-only;
				};
				partition@fs {
					label = "file system";
					reg = <0x00700000 0x00900000>;
				};
			};
		};

		i2c@118000 {
			lm75b@48 {
				compatible = "nxp,lm75a";
				reg = <0x48>;
			};
			eeprom@50 {
				compatible = "at24,24c256";
				reg = <0x50>;
			};
			rtc@68 {
				compatible = "pericom,pt7c4338";
				reg = <0x68>;
			};
		};

		i2c@118100 {
			eeprom@50 {
				compatible = "at24,24c256";
				reg = <0x50>;
			};
		};

		usb1: usb@211000 {
			dr_mode = "host";
		};

		pme: pme@316000 {
			/* Commented out, use default allocation */
			/* fsl,pme-pdsr = <0x0 0x23000000 0x0 0x01000000>; */
			/* fsl,pme-sre = <0x0 0x24000000 0x0 0x00a00000>; */
		};

		qman: qman@318000 {
			/* Commented out, use default allocation */
			/* fsl,qman-fqd = <0x0 0x20000000 0x0 0x01000000>; */
			/* fsl,qman-pfdr = <0x0 0x21000000 0x0 0x01000000>; */
		};

		bman: bman@31a000 {
			/* Same as fsl,qman-*, use default allocation */
			/* fsl,bman-fbpr = <0x0 0x22000000 0x0 0x01000000>; */
		};

		fman0: fman@400000 {
			enet0: ethernet@e0000 {
				tbi-handle = <&tbi0>;
				phy-handle = <&phy_sgmii_2>;
				phy-connection-type = "sgmii";
			};

			mdio0: mdio@e1120 {
				tbi0: tbi-phy@8 {
					reg = <0x8>;
					device_type = "tbi-phy";
				};

				phy_rgmii_0: ethernet-phy@0 {
					reg = <0x0>;
				};
				phy_rgmii_1: ethernet-phy@1 {
					reg = <0x1>;
				};
				phy_sgmii_2: ethernet-phy@2 {
					reg = <0x2>;
				};
				phy_sgmii_3: ethernet-phy@3 {
					reg = <0x3>;
				};
				phy_sgmii_4: ethernet-phy@4 {
					reg = <0x4>;
				};
				phy_sgmii_1c: ethernet-phy@1c {
					reg = <0x1c>;
				};
				phy_sgmii_1d: ethernet-phy@1d {
					reg = <0x1d>;
				};
				phy_sgmii_1e: ethernet-phy@1e {
					reg = <0x1e>;
				};
				phy_sgmii_1f: ethernet-phy@1f {
					reg = <0x1f>;
				};
			};

			enet1: ethernet@e2000 {
				tbi-handle = <&tbi1>;
				phy-handle = <&phy_sgmii_3>;
				phy-connection-type = "sgmii";
			};

			mdio@e3120 {
				tbi1: tbi-phy@8 {
					reg = <8>;
					device_type = "tbi-phy";
				};
			};

			enet2: ethernet@e4000 {
				tbi-handle = <&tbi2>;
				phy-handle = <&phy_sgmii_4>;
				phy-connection-type = "sgmii";
			};

			mdio@e5120 {
				tbi2: tbi-phy@8 {
					reg = <8>;
					device_type = "tbi-phy";
				};
			};

			enet3: ethernet@e6000 {
				tbi-handle = <&tbi3>;
				phy-handle = <&phy_rgmii_1>;
				phy-connection-type = "rgmii";
			};

			mdio@e7120 {
				tbi3: tbi-phy@8 {
					reg = <8>;
					device_type = "tbi-phy";
				};
			};

			enet4: ethernet@e8000 {
				tbi-handle = <&tbi4>;
				phy-handle = <&phy_rgmii_0>;
				phy-connection-type = "rgmii";
			};

			mdio@e9120 {
				tbi4: tbi-phy@8 {
					reg = <8>;
					device_type = "tbi-phy";
				};
			};

			enet5: ethernet@f0000 {
				/*
				 * phy-handle will be updated by U-Boot to
				 * reflect the actual slot the XAUI card is in.
				 */
				phy-handle = <&phy_xgmii_2>;
				phy-connection-type = "xgmii";
			};

			mdio@f1000 {
				/* XAUI card in slot 2 */
				phy_xgmii_2: ethernet-phy@0 {
					reg = <0x0>;
				};
			};
		};
	};

	rapidio@ffe0c0000 {
		reg = <0xf 0xfe0c0000 0 0x11000>;

		port1 {
			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
		};
		port2 {
			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
		};
	};

	localbus@ffe124000 {
		reg = <0xf 0xfe124000 0 0x1000>;
		ranges = <0 0 0xf 0xb8000000 0x04000000>;

		flash@0,0 {
			compatible = "cfi-flash";
			/*
                         * Map 64Mb of 128MB NOR flash memory. Since highest
                         * line of address of NOR flash memory are set by
                         * FPGA, memory are divided into two pages equal to
                         * 64MB. One of the pages can be accessed at once.
                         */
			reg = <0 0 0x04000000>;
			bank-width = <2>;
			device-width = <2>;
		};
	};

	pci0: pcie@ffe200000 {
		reg = <0xf 0xfe200000 0 0x1000>;
		ranges = <0x02000000 0 0x80000000 0x0 0x80000000 0x0 0x10000000
			  0x01000000 0 0x00000000 0x0 0xff000000 0x0 0x00010000>;
		pcie@0 {
			ranges = <0x02000000 0 0x80000000
				  0x02000000 0 0x80000000
				  0 0x10000000

				  0x01000000 0 0x00000000
				  0x01000000 0 0xff000000
				  0 0x00010000>;
		};
	};

	pci1: pcie@ffe201000 {
		reg = <0xf 0xfe201000 0 0x1000>;
		ranges = <0x02000000 0x0 0x90000000 0x0 0x90000000 0x0 0x10000000
			  0x01000000 0x0 0x00000000 0x0 0xff010000 0x0 0x00010000>;
		pcie@0 {
			ranges = <0x02000000 0 0x90000000
				  0x02000000 0 0x90000000
				  0 0x10000000

				  0x01000000 0 0x00000000
				  0x01000000 0 0xff010000
				  0 0x00010000>;
		};
	};

	pci2: pcie@ffe202000 {
		reg = <0xf 0xfe202000 0 0x1000>;
		ranges = <0x02000000 0 0xa0000000 0x0 0xa0000000 0 0x10000000
			  0x01000000 0 0x00000000 0x0 0xff020000 0 0x00010000>;
		pcie@0 {
			ranges = <0x02000000 0 0xa0000000
				  0x02000000 0 0xa0000000
				  0 0x10000000

				  0x01000000 0 0x00000000
				  0x01000000 0 0xff020000
				  0 0x00010000>;
		};
	};

	chosen {
		stdin = "serial0";
		stdout = "serial0";
	};
};