/*- * Copyright (c) 2016 Ruslan Bukin * All rights reserved. * * Portions of this software were developed by SRI International and the * University of Cambridge Computer Laboratory under DARPA/AFRL contract * FA8750-10-C-0237 ("CTSRD"), as part of the DARPA CRASH research programme. * * Portions of this software were developed by the University of Cambridge * Computer Laboratory as part of the CTSRD Project, with support from the * UK Higher Education Innovation Fund (HEIF). * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Xilinx AXI_QUAD_SPI */ #include #include #include #include #include #include #include #include #include #include #include #include #include "spibus_if.h" #include #include #include #include #include #include #include #define READ4(_sc, _reg) \ bus_space_read_4(_sc->bst, _sc->bsh, _reg) #define WRITE4(_sc, _reg, _val) \ bus_space_write_4(_sc->bst, _sc->bsh, _reg, _val) #define SPI_SRR 0x40 /* Software reset register */ #define SRR_RESET 0x0A /* The only reset value */ #define SPI_CR 0x60 /* Control register */ #define CR_LSB_FIRST (1 << 9) /* LSB first */ #define CR_MASTER_TI (1 << 8) /* Master Transaction Inhibit */ #define CR_MSS (1 << 7) /* Manual Slave Select */ #define CR_RST_RX (1 << 6) /* RX FIFO Reset */ #define CR_RST_TX (1 << 5) /* TX FIFO Reset */ #define CR_CPHA (1 << 4) /* Clock phase */ #define CR_CPOL (1 << 3) /* Clock polarity */ #define CR_MASTER (1 << 2) /* Master (SPI master mode) */ #define CR_SPE (1 << 1) /* SPI system enable */ #define CR_LOOP (1 << 0) /* Local loopback mode */ #define SPI_SR 0x64 /* Status register */ #define SR_TX_FULL (1 << 3) /* Transmit full */ #define SR_TX_EMPTY (1 << 2) /* Transmit empty */ #define SR_RX_FULL (1 << 1) /* Receive full */ #define SR_RX_EMPTY (1 << 0) /* Receive empty */ #define SPI_DTR 0x68 /* Data transmit register */ #define SPI_DRR 0x6C /* Data receive register */ #define SPI_SSR 0x70 /* Slave select register */ #define SPI_TFOR 0x74 /* Transmit FIFO Occupancy Register */ #define SPI_RFOR 0x78 /* Receive FIFO Occupancy Register */ #define SPI_DGIER 0x1C /* Device global interrupt enable register */ #define SPI_IPISR 0x20 /* IP interrupt status register */ #define SPI_IPIER 0x28 /* IP interrupt enable register */ struct spi_softc { struct resource *res[1]; bus_space_tag_t bst; bus_space_handle_t bsh; void *ih; }; static struct resource_spec spi_spec[] = { { SYS_RES_MEMORY, 0, RF_ACTIVE }, { -1, 0 } }; static int spi_probe(device_t dev) { if (!ofw_bus_status_okay(dev)) return (ENXIO); if (!ofw_bus_is_compatible(dev, "xlnx,xps-spi-3.2")) return (ENXIO); device_set_desc(dev, "Xilinx Quad SPI"); return (BUS_PROBE_DEFAULT); } static int spi_attach(device_t dev) { struct spi_softc *sc; uint32_t reg; sc = device_get_softc(dev); if (bus_alloc_resources(dev, spi_spec, sc->res)) { device_printf(dev, "could not allocate resources\n"); return (ENXIO); } /* Memory interface */ sc->bst = rman_get_bustag(sc->res[0]); sc->bsh = rman_get_bushandle(sc->res[0]); /* Reset */ WRITE4(sc, SPI_SRR, SRR_RESET); DELAY(1000); reg = (CR_MASTER | CR_MSS | CR_RST_RX | CR_RST_TX); WRITE4(sc, SPI_CR, reg); WRITE4(sc, SPI_DGIER, 0); /* Disable interrupts */ reg = (CR_MASTER | CR_MSS | CR_SPE); WRITE4(sc, SPI_CR, reg); device_add_child(dev, "spibus", 0); bus_attach_children(dev); return (0); } static int spi_txrx(struct spi_softc *sc, uint8_t *out_buf, uint8_t *in_buf, int bufsz, int cs) { uint32_t data; uint32_t i; for (i = 0; i < bufsz; i++) { WRITE4(sc, SPI_DTR, out_buf[i]); while(!(READ4(sc, SPI_SR) & SR_TX_EMPTY)) continue; data = READ4(sc, SPI_DRR); if (in_buf) in_buf[i] = (data & 0xff); } return (0); } static int spi_transfer(device_t dev, device_t child, struct spi_command *cmd) { struct spi_softc *sc; uint32_t reg; uint32_t cs; sc = device_get_softc(dev); KASSERT(cmd->tx_cmd_sz == cmd->rx_cmd_sz, ("%s: TX/RX command sizes should be equal", __func__)); KASSERT(cmd->tx_data_sz == cmd->rx_data_sz, ("%s: TX/RX data sizes should be equal", __func__)); /* get the proper chip select */ spibus_get_cs(child, &cs); cs &= ~SPIBUS_CS_HIGH; /* Assert CS */ reg = READ4(sc, SPI_SSR); reg &= ~(1 << cs); WRITE4(sc, SPI_SSR, reg); /* Command */ spi_txrx(sc, cmd->tx_cmd, cmd->rx_cmd, cmd->tx_cmd_sz, cs); /* Data */ spi_txrx(sc, cmd->tx_data, cmd->rx_data, cmd->tx_data_sz, cs); /* Deassert CS */ reg = READ4(sc, SPI_SSR); reg |= (1 << cs); WRITE4(sc, SPI_SSR, reg); return (0); } static device_method_t spi_methods[] = { /* Device interface */ DEVMETHOD(device_probe, spi_probe), DEVMETHOD(device_attach, spi_attach), /* SPI interface */ DEVMETHOD(spibus_transfer, spi_transfer), DEVMETHOD_END }; static driver_t spi_driver = { "spi", spi_methods, sizeof(struct spi_softc), }; DRIVER_MODULE(spi, simplebus, spi_driver, 0, 0);