/*- * SPDX-License-Identifier: BSD-2-Clause * * Copyright (c) 1998 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Lennart Augustsson (augustss@carlstedt.se) at * Carlstedt Research & Technology. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #include /* Universal Host Controller Interface * * UHCI spec: http://www.intel.com/ */ /* The low level controller code for UHCI has been split into * PCI probes and UHCI specific code. This was done to facilitate the * sharing of code between *BSD's */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "usb_if.h" #define PCI_UHCI_VENDORID_INTEL 0x8086 #define PCI_UHCI_VENDORID_HP 0x103c #define PCI_UHCI_VENDORID_VIA 0x1106 #define PCI_UHCI_VENDORID_VMWARE 0x15ad #define PCI_UHCI_VENDORID_ZHAOXIN 0x1d17 /* PIIX4E has no separate stepping */ static device_probe_t uhci_pci_probe; static device_attach_t uhci_pci_attach; static device_detach_t uhci_pci_detach; static usb_take_controller_t uhci_pci_take_controller; static int uhci_pci_take_controller(device_t self) { pci_write_config(self, PCI_LEGSUP, PCI_LEGSUP_USBPIRQDEN, 2); return (0); } static const char * uhci_pci_match(device_t self) { uint32_t device_id = pci_get_devid(self); switch (device_id) { case 0x26888086: return ("Intel 631XESB/632XESB/3100 USB controller USB-1"); case 0x26898086: return ("Intel 631XESB/632XESB/3100 USB controller USB-2"); case 0x268a8086: return ("Intel 631XESB/632XESB/3100 USB controller USB-3"); case 0x268b8086: return ("Intel 631XESB/632XESB/3100 USB controller USB-4"); case 0x70208086: return ("Intel 82371SB (PIIX3) USB controller"); case 0x71128086: return ("Intel 82371AB/EB (PIIX4) USB controller"); case 0x24128086: return ("Intel 82801AA (ICH) USB controller"); case 0x24228086: return ("Intel 82801AB (ICH0) USB controller"); case 0x24428086: return ("Intel 82801BA/BAM (ICH2) USB controller USB-A"); case 0x24448086: return ("Intel 82801BA/BAM (ICH2) USB controller USB-B"); case 0x24828086: return ("Intel 82801CA/CAM (ICH3) USB controller USB-A"); case 0x24848086: return ("Intel 82801CA/CAM (ICH3) USB controller USB-B"); case 0x24878086: return ("Intel 82801CA/CAM (ICH3) USB controller USB-C"); case 0x24c28086: return ("Intel 82801DB (ICH4) USB controller USB-A"); case 0x24c48086: return ("Intel 82801DB (ICH4) USB controller USB-B"); case 0x24c78086: return ("Intel 82801DB (ICH4) USB controller USB-C"); case 0x24d28086: return ("Intel 82801EB (ICH5) USB controller USB-A"); case 0x24d48086: return ("Intel 82801EB (ICH5) USB controller USB-B"); case 0x24d78086: return ("Intel 82801EB (ICH5) USB controller USB-C"); case 0x24de8086: return ("Intel 82801EB (ICH5) USB controller USB-D"); case 0x25a98086: return ("Intel 6300ESB USB controller USB-A"); case 0x25aa8086: return ("Intel 6300ESB USB controller USB-B"); case 0x26588086: return ("Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A"); case 0x26598086: return ("Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B"); case 0x265a8086: return ("Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C"); case 0x265b8086: return ("Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D"); case 0x27c88086: return ("Intel 82801G (ICH7) USB controller USB-A"); case 0x27c98086: return ("Intel 82801G (ICH7) USB controller USB-B"); case 0x27ca8086: return ("Intel 82801G (ICH7) USB controller USB-C"); case 0x27cb8086: return ("Intel 82801G (ICH7) USB controller USB-D"); case 0x28308086: return ("Intel 82801H (ICH8) USB controller USB-A"); case 0x28318086: return ("Intel 82801H (ICH8) USB controller USB-B"); case 0x28328086: return ("Intel 82801H (ICH8) USB controller USB-C"); case 0x28348086: return ("Intel 82801H (ICH8) USB controller USB-D"); case 0x28358086: return ("Intel 82801H (ICH8) USB controller USB-E"); case 0x29348086: return ("Intel 82801I (ICH9) USB controller"); case 0x29358086: return ("Intel 82801I (ICH9) USB controller"); case 0x29368086: return ("Intel 82801I (ICH9) USB controller"); case 0x29378086: return ("Intel 82801I (ICH9) USB controller"); case 0x29388086: return ("Intel 82801I (ICH9) USB controller"); case 0x29398086: return ("Intel 82801I (ICH9) USB controller"); case 0x3a348086: return ("Intel 82801JI (ICH10) USB controller USB-A"); case 0x3a358086: return ("Intel 82801JI (ICH10) USB controller USB-B"); case 0x3a368086: return ("Intel 82801JI (ICH10) USB controller USB-C"); case 0x3a378086: return ("Intel 82801JI (ICH10) USB controller USB-D"); case 0x3a388086: return ("Intel 82801JI (ICH10) USB controller USB-E"); case 0x3a398086: return ("Intel 82801JI (ICH10) USB controller USB-F"); case 0x3a678086: return ("Intel 82801JD (ICH10) USB controller USB-A"); case 0x3a688086: return ("Intel 82801JD (ICH10) USB controller USB-B"); case 0x3a698086: return ("Intel 82801JD (ICH10) USB controller USB-C"); case 0x3a648086: return ("Intel 82801JD (ICH10) USB controller USB-D"); case 0x3a658086: return ("Intel 82801JD (ICH10) USB controller USB-E"); case 0x3a668086: return ("Intel 82801JD (ICH10) USB controller USB-F"); case 0x719a8086: return ("Intel 82443MX USB controller"); case 0x76028086: return ("Intel 82372FB/82468GX USB controller"); case 0x3300103c: return ("HP iLO Standard Virtual USB controller"); case 0x30381106: return ("VIA 83C572 USB controller"); case 0x077415ad: return ("VMware USB controller"); case 0x30381d17: return ("Zhaoxin ZX-100/ZX-200/ZX-E USB controller"); default: break; } if ((pci_get_class(self) == PCIC_SERIALBUS) && (pci_get_subclass(self) == PCIS_SERIALBUS_USB) && (pci_get_progif(self) == PCI_INTERFACE_UHCI)) { return ("UHCI (generic) USB controller"); } return (NULL); } static int uhci_pci_probe(device_t self) { const char *desc = uhci_pci_match(self); if (desc) { device_set_desc(self, desc); return (BUS_PROBE_DEFAULT); } else { return (ENXIO); } } static int uhci_pci_attach(device_t self) { uhci_softc_t *sc = device_get_softc(self); int rid; int err; /* initialise some bus fields */ sc->sc_bus.parent = self; sc->sc_bus.devices = sc->sc_devices; sc->sc_bus.devices_max = UHCI_MAX_DEVICES; sc->sc_bus.dma_bits = 32; /* get all DMA memory */ if (usb_bus_mem_alloc_all(&sc->sc_bus, USB_GET_DMA_TAG(self), &uhci_iterate_hw_softc)) { return ENOMEM; } sc->sc_dev = self; pci_enable_busmaster(self); rid = PCI_UHCI_BASE_REG; sc->sc_io_res = bus_alloc_resource_any(self, SYS_RES_IOPORT, &rid, RF_ACTIVE); if (!sc->sc_io_res) { device_printf(self, "Could not map ports\n"); goto error; } sc->sc_io_tag = rman_get_bustag(sc->sc_io_res); sc->sc_io_hdl = rman_get_bushandle(sc->sc_io_res); sc->sc_io_size = rman_get_size(sc->sc_io_res); /* disable interrupts */ bus_space_write_2(sc->sc_io_tag, sc->sc_io_hdl, UHCI_INTR, 0); rid = 0; sc->sc_irq_res = bus_alloc_resource_any(self, SYS_RES_IRQ, &rid, RF_SHAREABLE | RF_ACTIVE); if (sc->sc_irq_res == NULL) { device_printf(self, "Could not allocate irq\n"); goto error; } sc->sc_bus.bdev = device_add_child(self, "usbus", DEVICE_UNIT_ANY); if (!sc->sc_bus.bdev) { device_printf(self, "Could not add USB device\n"); goto error; } device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus); /* * uhci_pci_match must never return NULL if uhci_pci_probe * succeeded */ device_set_desc(sc->sc_bus.bdev, uhci_pci_match(self)); switch (pci_get_vendor(self)) { case PCI_UHCI_VENDORID_INTEL: sprintf(sc->sc_vendor, "Intel"); break; case PCI_UHCI_VENDORID_HP: sprintf(sc->sc_vendor, "HP"); break; case PCI_UHCI_VENDORID_VIA: sprintf(sc->sc_vendor, "VIA"); break; case PCI_UHCI_VENDORID_VMWARE: sprintf(sc->sc_vendor, "VMware"); break; case PCI_UHCI_VENDORID_ZHAOXIN: sprintf(sc->sc_vendor, "Zhaoxin"); break; default: if (bootverbose) { device_printf(self, "(New UHCI DeviceId=0x%08x)\n", pci_get_devid(self)); } sprintf(sc->sc_vendor, "(0x%04x)", pci_get_vendor(self)); } switch (pci_read_config(self, PCI_USBREV, 1) & PCI_USB_REV_MASK) { case PCI_USB_REV_PRE_1_0: sc->sc_bus.usbrev = USB_REV_PRE_1_0; break; case PCI_USB_REV_1_0: sc->sc_bus.usbrev = USB_REV_1_0; break; default: /* Quirk for Parallels Desktop 4.0 */ device_printf(self, "USB revision is unknown. Assuming v1.1.\n"); sc->sc_bus.usbrev = USB_REV_1_1; break; } err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE, NULL, (driver_intr_t *)uhci_interrupt, sc, &sc->sc_intr_hdl); if (err) { device_printf(self, "Could not setup irq, %d\n", err); sc->sc_intr_hdl = NULL; goto error; } /* * Set the PIRQD enable bit and switch off all the others. We don't * want legacy support to interfere with us XXX Does this also mean * that the BIOS won't touch the keyboard anymore if it is connected * to the ports of the root hub? */ #ifdef USB_DEBUG if (pci_read_config(self, PCI_LEGSUP, 2) != PCI_LEGSUP_USBPIRQDEN) { device_printf(self, "LegSup = 0x%04x\n", pci_read_config(self, PCI_LEGSUP, 2)); } #endif pci_write_config(self, PCI_LEGSUP, PCI_LEGSUP_USBPIRQDEN, 2); err = uhci_init(sc); if (!err) { err = device_probe_and_attach(sc->sc_bus.bdev); } if (err) { device_printf(self, "USB init failed\n"); goto error; } return (0); error: uhci_pci_detach(self); return (ENXIO); } int uhci_pci_detach(device_t self) { uhci_softc_t *sc = device_get_softc(self); /* during module unload there are lots of children leftover */ device_delete_children(self); /* * disable interrupts that might have been switched on in * uhci_init. */ if (sc->sc_io_res) { USB_BUS_LOCK(&sc->sc_bus); /* stop the controller */ uhci_reset(sc); USB_BUS_UNLOCK(&sc->sc_bus); } pci_disable_busmaster(self); if (sc->sc_irq_res && sc->sc_intr_hdl) { int err = bus_teardown_intr(self, sc->sc_irq_res, sc->sc_intr_hdl); if (err) { /* XXX or should we panic? */ device_printf(self, "Could not tear down irq, %d\n", err); } sc->sc_intr_hdl = NULL; } if (sc->sc_irq_res) { bus_release_resource(self, SYS_RES_IRQ, 0, sc->sc_irq_res); sc->sc_irq_res = NULL; } if (sc->sc_io_res) { bus_release_resource(self, SYS_RES_IOPORT, PCI_UHCI_BASE_REG, sc->sc_io_res); sc->sc_io_res = NULL; } usb_bus_mem_free_all(&sc->sc_bus, &uhci_iterate_hw_softc); return (0); } static device_method_t uhci_pci_methods[] = { /* Device interface */ DEVMETHOD(device_probe, uhci_pci_probe), DEVMETHOD(device_attach, uhci_pci_attach), DEVMETHOD(device_detach, uhci_pci_detach), DEVMETHOD(device_suspend, bus_generic_suspend), DEVMETHOD(device_resume, bus_generic_resume), DEVMETHOD(device_shutdown, bus_generic_shutdown), DEVMETHOD(usb_take_controller, uhci_pci_take_controller), DEVMETHOD_END }; static driver_t uhci_driver = { .name = "uhci", .methods = uhci_pci_methods, .size = sizeof(struct uhci_softc), }; DRIVER_MODULE(uhci, pci, uhci_driver, 0, 0); MODULE_DEPEND(uhci, usb, 1, 1, 1);