/*- * Copyright (c) 2016 Jared McNeill * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "uart_if.h" struct snps_softc { struct ns8250_softc ns8250; clk_t baudclk; clk_t apb_pclk; hwreset_t reset; }; /* * To use early printf on 64 bits Allwinner SoC, add to kernel config * options SOCDEV_PA=0x0 * options SOCDEV_VA=0x40000000 * options EARLY_PRINTF * * To use early printf on 32 bits Allwinner SoC, add to kernel config * options SOCDEV_PA=0x01C00000 * options SOCDEV_VA=0x10000000 * options EARLY_PRINTF * * remove the if 0 */ #if 0 #ifdef EARLY_PRINTF static void uart_snps_early_putc(int c) { volatile uint32_t *stat; volatile uint32_t *tx; #ifdef ALLWINNER_64 stat = (uint32_t *) (SOCDEV_VA + 0x1C2807C); tx = (uint32_t *) (SOCDEV_VA + 0x1C28000); #endif #ifdef ALLWINNER_32 stat = (uint32_t *) (SOCDEV_VA + 0x2807C); tx = (uint32_t *) (SOCDEV_VA + 0x28000); #endif while ((*stat & (1 << 2)) == 0) continue; *tx = c; } early_putc_t *early_putc = uart_snps_early_putc; #endif /* EARLY_PRINTF */ #endif static kobj_method_t snps_methods[] = { KOBJMETHOD(uart_probe, ns8250_bus_probe), KOBJMETHOD(uart_attach, ns8250_bus_attach), KOBJMETHOD(uart_detach, ns8250_bus_detach), KOBJMETHOD(uart_flush, ns8250_bus_flush), KOBJMETHOD(uart_getsig, ns8250_bus_getsig), KOBJMETHOD(uart_ioctl, ns8250_bus_ioctl), KOBJMETHOD(uart_ipend, ns8250_bus_ipend), KOBJMETHOD(uart_param, ns8250_bus_param), KOBJMETHOD(uart_receive, ns8250_bus_receive), KOBJMETHOD(uart_setsig, ns8250_bus_setsig), KOBJMETHOD(uart_transmit, ns8250_bus_transmit), KOBJMETHOD(uart_grab, ns8250_bus_grab), KOBJMETHOD(uart_ungrab, ns8250_bus_ungrab), KOBJMETHOD_END }; struct uart_class uart_snps_class = { "snps", snps_methods, sizeof(struct snps_softc), .uc_ops = &uart_ns8250_ops, .uc_range = 8, .uc_rclk = 0, }; static struct ofw_compat_data compat_data[] = { { "snps,dw-apb-uart", (uintptr_t)&uart_snps_class }, { "marvell,armada-38x-uart", (uintptr_t)&uart_snps_class }, { NULL, (uintptr_t)NULL } }; UART_FDT_CLASS(compat_data); static int snps_get_clocks(device_t dev, clk_t *baudclk, clk_t *apb_pclk) { *baudclk = NULL; *apb_pclk = NULL; /* Baud clock is either named "baudclk", or there is a single * unnamed clock. */ if (clk_get_by_ofw_name(dev, 0, "baudclk", baudclk) != 0 && clk_get_by_ofw_index(dev, 0, 0, baudclk) != 0) return (ENOENT); /* APB peripheral clock is optional */ (void)clk_get_by_ofw_name(dev, 0, "apb_pclk", apb_pclk); return (0); } static int snps_probe(device_t dev) { struct snps_softc *sc; struct uart_class *uart_class; phandle_t node; uint32_t shift, iowidth, clock; uint64_t freq; int error; clk_t baudclk, apb_pclk; hwreset_t reset; if (!ofw_bus_status_okay(dev)) return (ENXIO); uart_class = (struct uart_class *)ofw_bus_search_compatible(dev, compat_data)->ocd_data; if (uart_class == NULL) return (ENXIO); freq = 0; sc = device_get_softc(dev); sc->ns8250.base.sc_class = uart_class; node = ofw_bus_get_node(dev); if (OF_getencprop(node, "reg-shift", &shift, sizeof(shift)) <= 0) shift = 0; if (OF_getencprop(node, "reg-io-width", &iowidth, sizeof(iowidth)) <= 0) iowidth = 1; if (OF_getencprop(node, "clock-frequency", &clock, sizeof(clock)) <= 0) clock = 0; if (hwreset_get_by_ofw_idx(dev, 0, 0, &reset) == 0) { error = hwreset_deassert(reset); if (error != 0) { device_printf(dev, "cannot de-assert reset\n"); return (error); } } if (snps_get_clocks(dev, &baudclk, &apb_pclk) == 0) { error = clk_enable(baudclk); if (error != 0) { device_printf(dev, "cannot enable baud clock\n"); return (error); } if (apb_pclk != NULL) { error = clk_enable(apb_pclk); if (error != 0) { device_printf(dev, "cannot enable peripheral clock\n"); return (error); } } if (clock == 0) { error = clk_get_freq(baudclk, &freq); if (error != 0) { device_printf(dev, "cannot get frequency\n"); return (error); } clock = (uint32_t)freq; } } if (bootverbose && clock == 0) device_printf(dev, "could not determine frequency\n"); error = uart_bus_probe(dev, (int)shift, (int)iowidth, (int)clock, 0, 0, UART_F_BUSY_DETECT); if (error > 0) return (error); /* XXX uart_bus_probe has changed the softc, so refresh it */ sc = device_get_softc(dev); /* Store clock and reset handles for detach */ sc->baudclk = baudclk; sc->apb_pclk = apb_pclk; sc->reset = reset; return (BUS_PROBE_VENDOR); } static int snps_detach(device_t dev) { struct snps_softc *sc; clk_t baudclk, apb_pclk; hwreset_t reset; int error; sc = device_get_softc(dev); baudclk = sc->baudclk; apb_pclk = sc->apb_pclk; reset = sc->reset; error = uart_bus_detach(dev); if (error != 0) return (error); if (reset != NULL) { error = hwreset_assert(reset); if (error != 0) { device_printf(dev, "cannot assert reset\n"); return (error); } hwreset_release(reset); } if (apb_pclk != NULL) { error = clk_release(apb_pclk); if (error != 0) { device_printf(dev, "cannot release peripheral clock\n"); return (error); } } if (baudclk != NULL) { error = clk_release(baudclk); if (error != 0) { device_printf(dev, "cannot release baud clock\n"); return (error); } } return (0); } static device_method_t snps_bus_methods[] = { /* Device interface */ DEVMETHOD(device_probe, snps_probe), DEVMETHOD(device_attach, uart_bus_attach), DEVMETHOD(device_detach, snps_detach), DEVMETHOD_END }; static driver_t snps_uart_driver = { uart_driver_name, snps_bus_methods, sizeof(struct snps_softc) }; DRIVER_MODULE(uart_snps, simplebus, snps_uart_driver, 0, 0);