/* * Copyright (c) 1997, Stefan Esser * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice unmodified, this list of conditions, and the following * disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $Id: pci.c,v 1.86 1998/09/06 22:41:41 tegge Exp $ * */ #include "pci.h" #if NPCI > 0 #include "opt_devfs.h" #include "opt_simos.h" #include #include #include #include #include #include #include #include #include #ifdef DEVFS #include #endif /* DEVFS */ #include #include #include #include #include #include #ifdef APIC_IO #include #endif /* APIC_IO */ STAILQ_HEAD(devlist, pci_devinfo) pci_devq; u_int32_t pci_numdevs = 0; u_int32_t pci_generation = 0; /* return highest PCI bus number known to be used, or -1 if none */ static int pci_bushigh(void) { if (pci_cfgopen() == 0) return (-1); return (0); } /* return base address of memory or port map */ static int pci_mapbase(unsigned mapreg) { int mask = 0x03; if ((mapreg & 0x01) == 0) mask = 0x0f; return (mapreg & ~mask); } /* return map type of memory or port map */ static int pci_maptype(unsigned mapreg) { static u_int8_t maptype[0x10] = { PCI_MAPMEM, PCI_MAPPORT, PCI_MAPMEM, 0, PCI_MAPMEM, PCI_MAPPORT, 0, 0, PCI_MAPMEM|PCI_MAPMEMP, PCI_MAPPORT, PCI_MAPMEM|PCI_MAPMEMP, 0, PCI_MAPMEM|PCI_MAPMEMP, PCI_MAPPORT, 0, 0, }; return maptype[mapreg & 0x0f]; } /* return log2 of map size decoded for memory or port map */ static int pci_mapsize(unsigned testval) { int ln2size; testval = pci_mapbase(testval); ln2size = 0; if (testval != 0) { while ((testval & 1) == 0) { ln2size++; testval >>= 1; } } return (ln2size); } /* return log2 of address range supported by map register */ static int pci_maprange(unsigned mapreg) { int ln2range = 0; switch (mapreg & 0x07) { case 0x00: case 0x01: case 0x05: ln2range = 32; break; case 0x02: ln2range = 20; break; case 0x04: ln2range = 64; break; } return (ln2range); } /* extract map parameters into newly allocated array of pcimap structures */ static pcimap * pci_readmaps(pcicfgregs *cfg, int maxmaps) { int i; pcimap *map; int map64 = 0; for (i = 0; i < maxmaps; i++) { int reg = PCIR_MAPS + i*4; u_int32_t base; u_int32_t ln2range; base = pci_cfgread(cfg, reg, 4); ln2range = pci_maprange(base); if (base == 0 || ln2range == 0) maxmaps = i; else if (ln2range > 32) i++; } map = malloc(maxmaps * sizeof (pcimap), M_DEVBUF, M_WAITOK); if (map != NULL) { bzero(map, sizeof(pcimap) * maxmaps); for (i = 0; i < maxmaps; i++) { int reg = PCIR_MAPS + i*4; u_int32_t base; u_int32_t testval; base = pci_cfgread(cfg, reg, 4); if (map64 == 0) { pci_cfgwrite(cfg, reg, 0xffffffff, 4); testval = pci_cfgread(cfg, reg, 4); pci_cfgwrite(cfg, reg, base, 4); map[i].base = pci_mapbase(base); map[i].type = pci_maptype(base); map[i].ln2size = pci_mapsize(testval); map[i].ln2range = pci_maprange(testval); map64 = map[i].ln2range == 64; } else { /* only fill in base, other fields are 0 */ map[i].base = base; map64 = 0; } } cfg->nummaps = maxmaps; } return (map); } /* adjust some values from PCI 1.0 devices to match 2.0 standards ... */ static void pci_fixancient(pcicfgregs *cfg) { if (cfg->hdrtype != 0) return; /* PCI to PCI bridges use header type 1 */ if (cfg->baseclass == PCIC_BRIDGE && cfg->subclass == PCIS_BRIDGE_PCI) cfg->hdrtype = 1; } /* read config data specific to header type 1 device (PCI to PCI bridge) */ static void * pci_readppb(pcicfgregs *cfg) { pcih1cfgregs *p; p = malloc(sizeof (pcih1cfgregs), M_DEVBUF, M_WAITOK); if (p == NULL) return (NULL); bzero(p, sizeof *p); p->secstat = pci_cfgread(cfg, PCIR_SECSTAT_1, 2); p->bridgectl = pci_cfgread(cfg, PCIR_BRIDGECTL_1, 2); p->seclat = pci_cfgread(cfg, PCIR_SECLAT_1, 1); p->iobase = PCI_PPBIOBASE (pci_cfgread(cfg, PCIR_IOBASEH_1, 2), pci_cfgread(cfg, PCIR_IOBASEL_1, 1)); p->iolimit = PCI_PPBIOLIMIT (pci_cfgread(cfg, PCIR_IOLIMITH_1, 2), pci_cfgread(cfg, PCIR_IOLIMITL_1, 1)); p->membase = PCI_PPBMEMBASE (0, pci_cfgread(cfg, PCIR_MEMBASE_1, 2)); p->memlimit = PCI_PPBMEMLIMIT (0, pci_cfgread(cfg, PCIR_MEMLIMIT_1, 2)); p->pmembase = PCI_PPBMEMBASE ( (pci_addr_t)pci_cfgread(cfg, PCIR_PMBASEH_1, 4), pci_cfgread(cfg, PCIR_PMBASEL_1, 2)); p->pmemlimit = PCI_PPBMEMLIMIT ( (pci_addr_t)pci_cfgread(cfg, PCIR_PMLIMITH_1, 4), pci_cfgread(cfg, PCIR_PMLIMITL_1, 2)); return (p); } /* read config data specific to header type 2 device (PCI to CardBus bridge) */ static void * pci_readpcb(pcicfgregs *cfg) { pcih2cfgregs *p; p = malloc(sizeof (pcih2cfgregs), M_DEVBUF, M_WAITOK); if (p == NULL) return (NULL); bzero(p, sizeof *p); p->secstat = pci_cfgread(cfg, PCIR_SECSTAT_2, 2); p->bridgectl = pci_cfgread(cfg, PCIR_BRIDGECTL_2, 2); p->seclat = pci_cfgread(cfg, PCIR_SECLAT_2, 1); p->membase0 = pci_cfgread(cfg, PCIR_MEMBASE0_2, 4); p->memlimit0 = pci_cfgread(cfg, PCIR_MEMLIMIT0_2, 4); p->membase1 = pci_cfgread(cfg, PCIR_MEMBASE1_2, 4); p->memlimit1 = pci_cfgread(cfg, PCIR_MEMLIMIT1_2, 4); p->iobase0 = pci_cfgread(cfg, PCIR_IOBASE0_2, 4); p->iolimit0 = pci_cfgread(cfg, PCIR_IOLIMIT0_2, 4); p->iobase1 = pci_cfgread(cfg, PCIR_IOBASE1_2, 4); p->iolimit1 = pci_cfgread(cfg, PCIR_IOLIMIT1_2, 4); p->pccardif = pci_cfgread(cfg, PCIR_PCCARDIF_2, 4); return p; } /* extract header type specific config data */ static void pci_hdrtypedata(pcicfgregs *cfg) { switch (cfg->hdrtype) { case 0: cfg->subvendor = pci_cfgread(cfg, PCIR_SUBVEND_0, 2); cfg->subdevice = pci_cfgread(cfg, PCIR_SUBDEV_0, 2); cfg->map = pci_readmaps(cfg, PCI_MAXMAPS_0); break; case 1: cfg->subvendor = pci_cfgread(cfg, PCIR_SUBVEND_1, 2); cfg->subdevice = pci_cfgread(cfg, PCIR_SUBDEV_1, 2); cfg->secondarybus = pci_cfgread(cfg, PCIR_SECBUS_1, 1); cfg->subordinatebus = pci_cfgread(cfg, PCIR_SUBBUS_1, 1); cfg->map = pci_readmaps(cfg, PCI_MAXMAPS_1); cfg->hdrspec = pci_readppb(cfg); break; case 2: cfg->subvendor = pci_cfgread(cfg, PCIR_SUBVEND_2, 2); cfg->subdevice = pci_cfgread(cfg, PCIR_SUBDEV_2, 2); cfg->secondarybus = pci_cfgread(cfg, PCIR_SECBUS_2, 1); cfg->subordinatebus = pci_cfgread(cfg, PCIR_SUBBUS_2, 1); cfg->map = pci_readmaps(cfg, PCI_MAXMAPS_2); cfg->hdrspec = pci_readpcb(cfg); break; } } /* read configuration header into pcicfgrect structure */ static struct pci_devinfo * pci_readcfg(pcicfgregs *probe) { pcicfgregs *cfg = NULL; struct pci_devinfo *devlist_entry; struct devlist *devlist_head; devlist_head = &pci_devq; devlist_entry = NULL; if (pci_cfgread(probe, PCIR_DEVVENDOR, 4) != -1) { devlist_entry = malloc(sizeof(struct pci_devinfo), M_DEVBUF, M_WAITOK); if (devlist_entry == NULL) return (NULL); cfg = &devlist_entry->cfg; bzero(cfg, sizeof *cfg); cfg->bus = probe->bus; cfg->slot = probe->slot; cfg->func = probe->func; cfg->vendor = pci_cfgread(cfg, PCIR_VENDOR, 2); cfg->device = pci_cfgread(cfg, PCIR_DEVICE, 2); cfg->cmdreg = pci_cfgread(cfg, PCIR_COMMAND, 2); cfg->statreg = pci_cfgread(cfg, PCIR_STATUS, 2); cfg->baseclass = pci_cfgread(cfg, PCIR_CLASS, 1); cfg->subclass = pci_cfgread(cfg, PCIR_SUBCLASS, 1); cfg->progif = pci_cfgread(cfg, PCIR_PROGIF, 1); cfg->revid = pci_cfgread(cfg, PCIR_REVID, 1); cfg->hdrtype = pci_cfgread(cfg, PCIR_HEADERTYPE, 1); cfg->cachelnsz = pci_cfgread(cfg, PCIR_CACHELNSZ, 1); cfg->lattimer = pci_cfgread(cfg, PCIR_LATTIMER, 1); cfg->intpin = pci_cfgread(cfg, PCIR_INTPIN, 1); cfg->intline = pci_cfgread(cfg, PCIR_INTLINE, 1); #ifdef __alpha__ alpha_platform_assign_pciintr(cfg); #endif #ifdef APIC_IO if (cfg->intpin != 0) { int airq; airq = pci_apic_irq(cfg->bus, cfg->slot, cfg->intpin); if (airq >= 0) { /* PCI specific entry found in MP table */ if (airq != cfg->intline) { undirect_pci_irq(cfg->intline); cfg->intline = airq; } } else { /* * PCI interrupts might be redirected to the * ISA bus according to some MP tables. Use the * same methods as used by the ISA devices * devices to find the proper IOAPIC int pin. */ airq = isa_apic_irq(cfg->intline); if ((airq >= 0) && (airq != cfg->intline)) { /* XXX: undirect_pci_irq() ? */ undirect_isa_irq(cfg->intline); cfg->intline = airq; } } } #endif /* APIC_IO */ cfg->mingnt = pci_cfgread(cfg, PCIR_MINGNT, 1); cfg->maxlat = pci_cfgread(cfg, PCIR_MAXLAT, 1); cfg->mfdev = (cfg->hdrtype & PCIM_MFDEV) != 0; cfg->hdrtype &= ~PCIM_MFDEV; pci_fixancient(cfg); pci_hdrtypedata(cfg); STAILQ_INSERT_TAIL(devlist_head, devlist_entry, pci_links); devlist_entry->conf.pc_sel.pc_bus = cfg->bus; devlist_entry->conf.pc_sel.pc_dev = cfg->slot; devlist_entry->conf.pc_sel.pc_func = cfg->func; devlist_entry->conf.pc_hdr = cfg->hdrtype; devlist_entry->conf.pc_subvendor = cfg->subvendor; devlist_entry->conf.pc_subdevice = cfg->subdevice; devlist_entry->conf.pc_vendor = cfg->vendor; devlist_entry->conf.pc_device = cfg->device; devlist_entry->conf.pc_class = cfg->baseclass; devlist_entry->conf.pc_subclass = cfg->subclass; devlist_entry->conf.pc_progif = cfg->progif; devlist_entry->conf.pc_revid = cfg->revid; pci_numdevs++; pci_generation++; } return (devlist_entry); } #if 0 /* free pcicfgregs structure and all depending data structures */ static int pci_freecfg(struct pci_devinfo *dinfo) { struct devlist *devlist_head; devlist_head = &pci_devq; if (dinfo->cfg.hdrspec != NULL) free(dinfo->cfg.hdrspec, M_DEVBUF); if (dinfo->cfg.map != NULL) free(dinfo->cfg.map, M_DEVBUF); /* XXX this hasn't been tested */ STAILQ_REMOVE(devlist_head, dinfo, pci_devinfo, pci_links); free(dinfo, M_DEVBUF); /* increment the generation count */ pci_generation++; /* we're losing one device */ pci_numdevs--; return (0); } #endif static void pci_addcfg(struct pci_devinfo *dinfo) { if (bootverbose) { int i; pcicfgregs *cfg = &dinfo->cfg; printf("found->\tvendor=0x%04x, dev=0x%04x, revid=0x%02x\n", cfg->vendor, cfg->device, cfg->revid); printf("\tclass=%02x-%02x-%02x, hdrtype=0x%02x, mfdev=%d\n", cfg->baseclass, cfg->subclass, cfg->progif, cfg->hdrtype, cfg->mfdev); #ifdef PCI_DEBUG printf("\tcmdreg=0x%04x, statreg=0x%04x, cachelnsz=%d (dwords)\n", cfg->cmdreg, cfg->statreg, cfg->cachelnsz); printf("\tlattimer=0x%02x (%d ns), mingnt=0x%02x (%d ns), maxlat=0x%02x (%d ns)\n", cfg->lattimer, cfg->lattimer * 30, cfg->mingnt, cfg->mingnt * 250, cfg->maxlat, cfg->maxlat * 250); #endif /* PCI_DEBUG */ if (cfg->intpin > 0) printf("\tintpin=%c, irq=%d\n", cfg->intpin +'a' -1, cfg->intline); for (i = 0; i < cfg->nummaps; i++) { pcimap *m = &cfg->map[i]; printf("\tmap[%d]: type %x, range %2d, base %08x, size %2d\n", i, m->type, m->ln2range, m->base, m->ln2size); } } pci_drvattach(dinfo); /* XXX currently defined in pci_compat.c */ } /* return pointer to device that is a bridge to this bus */ static pcicfgregs * pci_bridgeto(int bus) { return (NULL); /* XXX not yet implemented */ } /* scan one PCI bus for devices */ static int pci_probebus(int bus) { pcicfgregs probe; int bushigh = bus; #ifdef SIMOS #undef PCI_SLOTMAX #define PCI_SLOTMAX 0 #endif bzero(&probe, sizeof probe); /* XXX KDM */ /* probe.parent = pci_bridgeto(bus); */ probe.bus = bus; for (probe.slot = 0; probe.slot <= PCI_SLOTMAX; probe.slot++) { int pcifunchigh = 0; for (probe.func = 0; probe.func <= pcifunchigh; probe.func++) { struct pci_devinfo *dinfo = pci_readcfg(&probe); if (dinfo != NULL) { if (dinfo->cfg.mfdev) pcifunchigh = 7; /* * XXX: Temporarily move pci_addcfg() up before * the use of cfg->subordinatebus. This is * necessary, since pci_addcfg() calls the * device's probe(), which may read the bus# * from some device dependent register of * some host to PCI bridges. The probe will * eventually be moved to pci_readcfg(), and * pci_addcfg() will then be moved back down * below the conditional statement ... */ pci_addcfg(dinfo); if (bushigh < dinfo->cfg.subordinatebus) bushigh = dinfo->cfg.subordinatebus; /* XXX KDM */ /* cfg = NULL; we don't own this anymore ... */ } } } return (bushigh); } /* scan a PCI bus tree reached through one PCI attachment point */ int pci_probe(pciattach *parent) { int bushigh; int bus = 0; STAILQ_INIT(&pci_devq); bushigh = pci_bushigh(); while (bus <= bushigh) { int newbushigh; printf("Probing for devices on PCI bus %d:\n", bus); newbushigh = pci_probebus(bus); if (bushigh < newbushigh) bushigh = newbushigh; bus++; } return (bushigh); } /* * This is the user interface to PCI configuration space. */ static int pci_open(dev_t dev, int oflags, int devtype, struct proc *p) { if ((oflags & FWRITE) && securelevel > 0) { return EPERM; } return 0; } static int pci_close(dev_t dev, int flag, int devtype, struct proc *p) { return 0; } /* * Match a single pci_conf structure against an array of pci_match_conf * structures. The first argument, 'matches', is an array of num_matches * pci_match_conf structures. match_buf is a pointer to the pci_conf * structure that will be compared to every entry in the matches array. * This function returns 1 on failure, 0 on success. */ static int pci_conf_match(struct pci_match_conf *matches, int num_matches, struct pci_conf *match_buf) { int i; if ((matches == NULL) || (match_buf == NULL) || (num_matches <= 0)) return(1); for (i = 0; i < num_matches; i++) { /* * I'm not sure why someone would do this...but... */ if (matches[i].flags == PCI_GETCONF_NO_MATCH) continue; /* * Look at each of the match flags. If it's set, do the * comparison. If the comparison fails, we don't have a * match, go on to the next item if there is one. */ if (((matches[i].flags & PCI_GETCONF_MATCH_BUS) != 0) && (match_buf->pc_sel.pc_bus != matches[i].pc_sel.pc_bus)) continue; if (((matches[i].flags & PCI_GETCONF_MATCH_DEV) != 0) && (match_buf->pc_sel.pc_dev != matches[i].pc_sel.pc_dev)) continue; if (((matches[i].flags & PCI_GETCONF_MATCH_FUNC) != 0) && (match_buf->pc_sel.pc_func != matches[i].pc_sel.pc_func)) continue; if (((matches[i].flags & PCI_GETCONF_MATCH_VENDOR) != 0) && (match_buf->pc_vendor != matches[i].pc_vendor)) continue; if (((matches[i].flags & PCI_GETCONF_MATCH_DEVICE) != 0) && (match_buf->pc_device != matches[i].pc_device)) continue; if (((matches[i].flags & PCI_GETCONF_MATCH_CLASS) != 0) && (match_buf->pc_class != matches[i].pc_class)) continue; if (((matches[i].flags & PCI_GETCONF_MATCH_UNIT) != 0) && (match_buf->pd_unit != matches[i].pd_unit)) continue; if (((matches[i].flags & PCI_GETCONF_MATCH_NAME) != 0) && (strncmp(matches[i].pd_name, match_buf->pd_name, sizeof(match_buf->pd_name)) != 0)) continue; return(0); } return(1); } static int pci_ioctl(dev_t dev, u_long cmd, caddr_t data, int flag, struct proc *p) { struct pci_io *io; int error; if (!(flag & FWRITE)) return EPERM; switch(cmd) { case PCIOCGETCONF: { struct pci_devinfo *dinfo; struct pci_conf_io *cio; struct devlist *devlist_head; struct pci_match_conf *pattern_buf; int num_patterns; size_t iolen; int ionum, i; cio = (struct pci_conf_io *)data; num_patterns = 0; dinfo = NULL; /* * Hopefully the user won't pass in a null pointer, but it * can't hurt to check. */ if (cio == NULL) { error = EINVAL; break; } /* * If the user specified an offset into the device list, * but the list has changed since they last called this * ioctl, tell them that the list has changed. They will * have to get the list from the beginning. */ if ((cio->offset != 0) && (cio->generation != pci_generation)){ cio->num_matches = 0; cio->status = PCI_GETCONF_LIST_CHANGED; error = 0; break; } /* * Check to see whether the user has asked for an offset * past the end of our list. */ if (cio->offset >= pci_numdevs) { cio->num_matches = 0; cio->status = PCI_GETCONF_LAST_DEVICE; error = 0; break; } /* get the head of the device queue */ devlist_head = &pci_devq; /* * Determine how much room we have for pci_conf structures. * Round the user's buffer size down to the nearest * multiple of sizeof(struct pci_conf) in case the user * didn't specify a multiple of that size. */ iolen = min(cio->match_buf_len - (cio->match_buf_len % sizeof(struct pci_conf)), pci_numdevs * sizeof(struct pci_conf)); /* * Since we know that iolen is a multiple of the size of * the pciconf union, it's okay to do this. */ ionum = iolen / sizeof(struct pci_conf); /* * If this test is true, the user wants the pci_conf * structures returned to match the supplied entries. */ if ((cio->num_patterns > 0) && (cio->pat_buf_len > 0)) { /* * pat_buf_len needs to be: * num_patterns * sizeof(struct pci_match_conf) * While it is certainly possible the user just * allocated a large buffer, but set the number of * matches correctly, it is far more likely that * their kernel doesn't match the userland utility * they're using. It's also possible that the user * forgot to initialize some variables. Yes, this * may be overly picky, but I hazard to guess that * it's far more likely to just catch folks that * updated their kernel but not their userland. */ if ((cio->num_patterns * sizeof(struct pci_match_conf)) != cio->pat_buf_len){ /* The user made a mistake, return an error*/ cio->status = PCI_GETCONF_ERROR; printf("pci_ioctl: pat_buf_len %d != " "num_patterns (%d) * sizeof(struct " "pci_match_conf) (%d)\npci_ioctl: " "pat_buf_len should be = %d\n", cio->pat_buf_len, cio->num_patterns, sizeof(struct pci_match_conf), sizeof(struct pci_match_conf) * cio->num_patterns); printf("pci_ioctl: do your headers match your " "kernel?\n"); cio->num_matches = 0; error = EINVAL; break; } /* * Check the user's buffer to make sure it's readable. */ if ((error = useracc((caddr_t)cio->patterns, cio->pat_buf_len, B_READ)) != 1){ printf("pci_ioctl: pattern buffer %#lx, " "length %u isn't user accessible for" " READ\n", cio->patterns, cio->pat_buf_len); error = EACCES; break; } /* * Allocate a buffer to hold the patterns. */ pattern_buf = malloc(cio->pat_buf_len, M_TEMP, M_WAITOK); error = copyin(cio->patterns, pattern_buf, cio->pat_buf_len); if (error != 0) break; num_patterns = cio->num_patterns; } else if ((cio->num_patterns > 0) || (cio->pat_buf_len > 0)) { /* * The user made a mistake, spit out an error. */ cio->status = PCI_GETCONF_ERROR; cio->num_matches = 0; printf("pci_ioctl: invalid GETCONF arguments\n"); error = EINVAL; break; } else pattern_buf = NULL; /* * Make sure we can write to the match buffer. */ if ((error = useracc((caddr_t)cio->matches, cio->match_buf_len, B_WRITE)) != 1) { printf("pci_ioctl: match buffer %#lx, length %u " "isn't user accessible for WRITE\n", cio->matches, cio->match_buf_len); error = EACCES; break; } /* * Go through the list of devices and copy out the devices * that match the user's criteria. */ for (cio->num_matches = 0, error = 0, i = 0, dinfo = STAILQ_FIRST(devlist_head); (dinfo != NULL) && (cio->num_matches < ionum) && (error == 0) && (i < pci_numdevs); dinfo = STAILQ_NEXT(dinfo, pci_links), i++) { if (i < cio->offset) continue; if ((pattern_buf == NULL) || (pci_conf_match(pattern_buf, num_patterns, &dinfo->conf) == 0)) { /* * If we've filled up the user's buffer, * break out at this point. Since we've * got a match here, we'll pick right back * up at the matching entry. We can also * tell the user that there are more matches * left. */ if (cio->num_matches >= ionum) break; error = copyout(&dinfo->conf, &cio->matches[cio->num_matches], sizeof(struct pci_conf)); cio->num_matches++; } } /* * Set the pointer into the list, so if the user is getting * n records at a time, where n < pci_numdevs, */ cio->offset = i; /* * Set the generation, the user will need this if they make * another ioctl call with offset != 0. */ cio->generation = pci_generation; /* * If this is the last device, inform the user so he won't * bother asking for more devices. If dinfo isn't NULL, we * know that there are more matches in the list because of * the way the traversal is done. */ if (dinfo == NULL) cio->status = PCI_GETCONF_LAST_DEVICE; else cio->status = PCI_GETCONF_MORE_DEVS; if (pattern_buf != NULL) free(pattern_buf, M_TEMP); break; } case PCIOCREAD: io = (struct pci_io *)data; switch(io->pi_width) { pcicfgregs probe; case 4: case 2: case 1: probe.bus = io->pi_sel.pc_bus; probe.slot = io->pi_sel.pc_dev; probe.func = io->pi_sel.pc_func; io->pi_data = pci_cfgread(&probe, io->pi_reg, io->pi_width); error = 0; break; default: error = ENODEV; break; } break; case PCIOCWRITE: io = (struct pci_io *)data; switch(io->pi_width) { pcicfgregs probe; case 4: case 2: case 1: probe.bus = io->pi_sel.pc_bus; probe.slot = io->pi_sel.pc_dev; probe.func = io->pi_sel.pc_func; pci_cfgwrite(&probe, io->pi_reg, io->pi_data, io->pi_width); error = 0; break; default: error = ENODEV; break; } break; default: error = ENOTTY; break; } return (error); } #define PCI_CDEV 78 static struct cdevsw pcicdev = { pci_open, pci_close, noread, nowrite, pci_ioctl, nostop, noreset, nodevtotty, seltrue, nommap, nostrategy, "pci", 0, PCI_CDEV }; #ifdef DEVFS static void *pci_devfs_token; #endif static void pci_cdevinit(void *dummy) { dev_t dev; dev = makedev(PCI_CDEV, 0); cdevsw_add(&dev, &pcicdev, NULL); #ifdef DEVFS pci_devfs_token = devfs_add_devswf(&pcicdev, 0, DV_CHR, UID_ROOT, GID_WHEEL, 0644, "pci"); #endif } SYSINIT(pcidev, SI_SUB_DRIVERS, SI_ORDER_MIDDLE+PCI_CDEV, pci_cdevinit, NULL); #endif /* NPCI > 0 */