/*- * Copyright (c) 2017-2019 Alexander Motin * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * The Non-Transparent Bridge (NTB) is a device that allows you to connect * two or more systems using a PCI-e links, providing remote memory access. * * This module contains a driver for NTBs in PLX/Avago/Broadcom PCIe bridges. */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "../ntb.h" #define PLX_MAX_BARS 4 /* There are at most 4 data BARs. */ #define PLX_NUM_SPAD 8 /* There are 8 scratchpads. */ #define PLX_NUM_SPAD_PATT 4 /* Use test pattern as 4 more. */ #define PLX_NUM_DB 16 /* There are 16 doorbells. */ #define PLX_MAX_SPLIT 128 /* Allow are at most 128 splits. */ struct ntb_plx_mw_info { int mw_bar; int mw_64bit; int mw_rid; struct resource *mw_res; vm_paddr_t mw_pbase; caddr_t mw_vbase; vm_size_t mw_size; struct { vm_memattr_t mw_map_mode; bus_addr_t mw_xlat_addr; bus_size_t mw_xlat_size; } splits[PLX_MAX_SPLIT]; }; struct ntb_plx_softc { /* ntb.c context. Do not move! Must go first! */ void *ntb_store; device_t dev; struct resource *conf_res; int conf_rid; u_int ntx; /* NTx number within chip. */ u_int link; /* Link v/s Virtual side. */ u_int port; /* Port number within chip. */ u_int alut; /* A-LUT is enabled for NTx */ u_int split; /* split BAR2 into 2^x parts */ int int_rid; struct resource *int_res; void *int_tag; struct ntb_plx_mw_info mw_info[PLX_MAX_BARS]; int mw_count; /* Number of memory windows. */ int spad_count1; /* Number of standard spads. */ int spad_count2; /* Number of extra spads. */ uint32_t spad_off1; /* Offset of our spads. */ uint32_t spad_off2; /* Offset of our extra spads. */ uint32_t spad_offp1; /* Offset of peer spads. */ uint32_t spad_offp2; /* Offset of peer extra spads. */ /* Parameters of window shared with peer config access in B2B mode. */ int b2b_mw; /* Shared window number. */ uint64_t b2b_off; /* Offset in shared window. */ }; #define PLX_NT0_BASE 0x3E000 #define PLX_NT1_BASE 0x3C000 #define PLX_NTX_BASE(sc) ((sc)->ntx ? PLX_NT1_BASE : PLX_NT0_BASE) #define PLX_NTX_LINK_OFFSET 0x01000 /* Bases of NTx our/peer interface registers */ #define PLX_NTX_OUR_BASE(sc) \ (PLX_NTX_BASE(sc) + ((sc)->link ? PLX_NTX_LINK_OFFSET : 0)) #define PLX_NTX_PEER_BASE(sc) \ (PLX_NTX_BASE(sc) + ((sc)->link ? 0 : PLX_NTX_LINK_OFFSET)) /* Read/write NTx our interface registers */ #define NTX_READ(sc, reg) \ bus_read_4((sc)->conf_res, PLX_NTX_OUR_BASE(sc) + (reg)) #define NTX_WRITE(sc, reg, val) \ bus_write_4((sc)->conf_res, PLX_NTX_OUR_BASE(sc) + (reg), (val)) /* Read/write NTx peer interface registers */ #define PNTX_READ(sc, reg) \ bus_read_4((sc)->conf_res, PLX_NTX_PEER_BASE(sc) + (reg)) #define PNTX_WRITE(sc, reg, val) \ bus_write_4((sc)->conf_res, PLX_NTX_PEER_BASE(sc) + (reg), (val)) /* Read/write B2B NTx registers */ #define BNTX_READ(sc, reg) \ bus_read_4((sc)->mw_info[(sc)->b2b_mw].mw_res, \ PLX_NTX_BASE(sc) + (reg)) #define BNTX_WRITE(sc, reg, val) \ bus_write_4((sc)->mw_info[(sc)->b2b_mw].mw_res, \ PLX_NTX_BASE(sc) + (reg), (val)) #define PLX_PORT_BASE(p) ((p) << 12) #define PLX_STATION_PORT_BASE(sc) PLX_PORT_BASE((sc)->port & ~7) #define PLX_PORT_CONTROL(sc) (PLX_STATION_PORT_BASE(sc) + 0x208) static int ntb_plx_init(device_t dev); static int ntb_plx_detach(device_t dev); static int ntb_plx_mw_set_trans_internal(device_t dev, unsigned mw_idx); static int ntb_plx_probe(device_t dev) { switch (pci_get_devid(dev)) { case 0x87a010b5: device_set_desc(dev, "PLX Non-Transparent Bridge NT0 Link"); return (BUS_PROBE_DEFAULT); case 0x87a110b5: device_set_desc(dev, "PLX Non-Transparent Bridge NT1 Link"); return (BUS_PROBE_DEFAULT); case 0x87b010b5: device_set_desc(dev, "PLX Non-Transparent Bridge NT0 Virtual"); return (BUS_PROBE_DEFAULT); case 0x87b110b5: device_set_desc(dev, "PLX Non-Transparent Bridge NT1 Virtual"); return (BUS_PROBE_DEFAULT); } return (ENXIO); } static int ntb_plx_init(device_t dev) { struct ntb_plx_softc *sc = device_get_softc(dev); struct ntb_plx_mw_info *mw; uint64_t val64; int i; uint32_t val; if (sc->b2b_mw >= 0) { /* Set peer BAR0/1 size and address for B2B NTx access. */ mw = &sc->mw_info[sc->b2b_mw]; if (mw->mw_64bit) { PNTX_WRITE(sc, 0xe4, 0x3); /* 64-bit */ val64 = 0x2000000000000000 * mw->mw_bar | 0x4; PNTX_WRITE(sc, PCIR_BAR(0), val64); PNTX_WRITE(sc, PCIR_BAR(0) + 4, val64 >> 32); } else { PNTX_WRITE(sc, 0xe4, 0x2); /* 32-bit */ val = 0x20000000 * mw->mw_bar; PNTX_WRITE(sc, PCIR_BAR(0), val); } /* Set Virtual to Link address translation for B2B. */ for (i = 0; i < sc->mw_count; i++) { mw = &sc->mw_info[i]; if (mw->mw_64bit) { val64 = 0x2000000000000000 * mw->mw_bar; NTX_WRITE(sc, 0xc3c + (mw->mw_bar - 2) * 4, val64); NTX_WRITE(sc, 0xc3c + (mw->mw_bar - 2) * 4 + 4, val64 >> 32); } else { val = 0x20000000 * mw->mw_bar; NTX_WRITE(sc, 0xc3c + (mw->mw_bar - 2) * 4, val); } } /* Make sure Virtual to Link A-LUT is disabled. */ if (sc->alut) PNTX_WRITE(sc, 0xc94, 0); /* Enable all Link Interface LUT entries for peer. */ for (i = 0; i < 32; i += 2) { PNTX_WRITE(sc, 0xdb4 + i * 2, 0x00010001 | ((i + 1) << 19) | (i << 3)); } } /* * Enable Virtual Interface LUT entry 0 for 0:0.*. * entry 1 for our Requester ID reported by the chip, * entries 2-5 for 0/64/128/192:4.* of I/OAT DMA engines. * XXX: Its a hack, we can't know all DMA engines, but this covers all * I/OAT of Xeon E5/E7 at least from Sandy Bridge till Skylake I saw. */ val = (NTX_READ(sc, 0xc90) << 16) | 0x00010001; NTX_WRITE(sc, sc->link ? 0xdb4 : 0xd94, val); NTX_WRITE(sc, sc->link ? 0xdb8 : 0xd98, 0x40210021); NTX_WRITE(sc, sc->link ? 0xdbc : 0xd9c, 0xc0218021); /* Set Link to Virtual address translation. */ for (i = 0; i < sc->mw_count; i++) ntb_plx_mw_set_trans_internal(dev, i); pci_enable_busmaster(dev); if (sc->b2b_mw >= 0) PNTX_WRITE(sc, PCIR_COMMAND, PCIM_CMD_MEMEN | PCIM_CMD_BUSMASTEREN); return (0); } static void ntb_plx_isr(void *arg) { device_t dev = arg; struct ntb_plx_softc *sc = device_get_softc(dev); uint32_t val; ntb_db_event((device_t)arg, 0); if (sc->link) /* Link Interface has no Link Error registers. */ return; val = NTX_READ(sc, 0xfe0); if (val == 0) return; NTX_WRITE(sc, 0xfe0, val); if (val & 1) device_printf(dev, "Correctable Error\n"); if (val & 2) device_printf(dev, "Uncorrectable Error\n"); if (val & 4) { /* DL_Down resets link side registers, have to reinit. */ ntb_plx_init(dev); ntb_link_event(dev); } if (val & 8) device_printf(dev, "Uncorrectable Error Message Drop\n"); } static int ntb_plx_setup_intr(device_t dev) { struct ntb_plx_softc *sc = device_get_softc(dev); int error; /* * XXX: This hardware supports MSI, but I found it unusable. * It generates new MSI only when doorbell register goes from * zero, but does not generate it when another bit is set or on * partial clear. It makes operation very racy and unreliable. * The data book mentions some mask juggling magic to workaround * that, but I failed to make it work. */ sc->int_rid = 0; sc->int_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &sc->int_rid, RF_SHAREABLE|RF_ACTIVE); if (sc->int_res == NULL) { device_printf(dev, "bus_alloc_resource failed\n"); return (ENOMEM); } error = bus_setup_intr(dev, sc->int_res, INTR_MPSAFE | INTR_TYPE_MISC, NULL, ntb_plx_isr, dev, &sc->int_tag); if (error != 0) { device_printf(dev, "bus_setup_intr failed: %d\n", error); return (error); } if (!sc->link) { /* Link Interface has no Link Error registers. */ NTX_WRITE(sc, 0xfe0, 0xf); /* Clear link interrupts. */ NTX_WRITE(sc, 0xfe4, 0x0); /* Unmask link interrupts. */ } return (0); } static void ntb_plx_teardown_intr(device_t dev) { struct ntb_plx_softc *sc = device_get_softc(dev); if (!sc->link) /* Link Interface has no Link Error registers. */ NTX_WRITE(sc, 0xfe4, 0xf); /* Mask link interrupts. */ if (sc->int_res) { bus_teardown_intr(dev, sc->int_res, sc->int_tag); bus_release_resource(dev, SYS_RES_IRQ, sc->int_rid, sc->int_res); } } static int ntb_plx_attach(device_t dev) { struct ntb_plx_softc *sc = device_get_softc(dev); struct ntb_plx_mw_info *mw; int error = 0, i, j; uint32_t val; char buf[32]; /* Identify what we are (what side of what NTx). */ sc->dev = dev; val = pci_read_config(dev, 0xc8c, 4); sc->ntx = (val & 1) != 0; sc->link = (val & 0x80000000) != 0; /* Get access to whole 256KB of chip configuration space via BAR0/1. */ sc->conf_rid = PCIR_BAR(0); sc->conf_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &sc->conf_rid, RF_ACTIVE); if (sc->conf_res == NULL) { device_printf(dev, "Can't allocate configuration BAR.\n"); return (ENXIO); } /* * The device occupies whole bus. In translated TLP slot field * keeps LUT index (original bus/slot), function is passed through. */ bus_dma_iommu_set_buswide(dev); /* Identify chip port we are connected to. */ val = bus_read_4(sc->conf_res, 0x360); sc->port = (val >> ((sc->ntx == 0) ? 8 : 16)) & 0x1f; /* Detect A-LUT enable and size. */ val >>= 30; sc->alut = (val == 0x3) ? 1 : ((val & (1 << sc->ntx)) ? 2 : 0); if (sc->alut) device_printf(dev, "%u A-LUT entries\n", 128 * sc->alut); /* Find configured memory windows at BAR2-5. */ sc->mw_count = 0; for (i = 2; i <= 5; i++) { mw = &sc->mw_info[sc->mw_count]; mw->mw_bar = i; mw->mw_rid = PCIR_BAR(mw->mw_bar); mw->mw_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &mw->mw_rid, RF_ACTIVE); if (mw->mw_res == NULL) continue; mw->mw_pbase = rman_get_start(mw->mw_res); mw->mw_size = rman_get_size(mw->mw_res); mw->mw_vbase = rman_get_virtual(mw->mw_res); for (j = 0; j < PLX_MAX_SPLIT; j++) mw->splits[j].mw_map_mode = VM_MEMATTR_UNCACHEABLE; sc->mw_count++; /* Skip over adjacent BAR for 64-bit BARs. */ val = pci_read_config(dev, PCIR_BAR(mw->mw_bar), 4); if ((val & PCIM_BAR_MEM_TYPE) == PCIM_BAR_MEM_64) { mw->mw_64bit = 1; i++; } } /* Try to identify B2B mode. */ i = 1; snprintf(buf, sizeof(buf), "hint.%s.%d.b2b", device_get_name(dev), device_get_unit(dev)); TUNABLE_INT_FETCH(buf, &i); if (sc->link) { device_printf(dev, "NTB-to-Root Port mode (Link Interface)\n"); sc->b2b_mw = -1; } else if (i == 0) { device_printf(dev, "NTB-to-Root Port mode (Virtual Interface)\n"); sc->b2b_mw = -1; } else { device_printf(dev, "NTB-to-NTB (back-to-back) mode\n"); /* We need at least one memory window for B2B peer access. */ if (sc->mw_count == 0) { device_printf(dev, "No memory window BARs enabled.\n"); error = ENXIO; goto out; } sc->b2b_mw = sc->mw_count - 1; /* Use half of the window for B2B, but no less then 1MB. */ mw = &sc->mw_info[sc->b2b_mw]; if (mw->mw_size >= 2 * 1024 * 1024) sc->b2b_off = mw->mw_size / 2; else sc->b2b_off = 0; } snprintf(buf, sizeof(buf), "hint.%s.%d.split", device_get_name(dev), device_get_unit(dev)); TUNABLE_INT_FETCH(buf, &sc->split); if (sc->split > 7) { device_printf(dev, "Split value is too high (%u)\n", sc->split); sc->split = 0; } else if (sc->split > 0 && sc->alut == 0) { device_printf(dev, "Can't split with disabled A-LUT\n"); sc->split = 0; } else if (sc->split > 0 && (sc->mw_count == 0 || sc->mw_info[0].mw_bar != 2)) { device_printf(dev, "Can't split disabled BAR2\n"); sc->split = 0; } else if (sc->split > 0 && (sc->b2b_mw == 0 && sc->b2b_off == 0)) { device_printf(dev, "Can't split BAR2 consumed by B2B\n"); sc->split = 0; } else if (sc->split > 0) { device_printf(dev, "Splitting BAR2 into %d memory windows\n", 1 << sc->split); } /* * Use Physical Layer User Test Pattern as additional scratchpad. * Make sure they are present and enabled by writing to them. * XXX: Its a hack, but standard 8 registers are not enough. */ sc->spad_offp1 = sc->spad_off1 = PLX_NTX_OUR_BASE(sc) + 0xc6c; sc->spad_offp2 = sc->spad_off2 = PLX_PORT_BASE(sc->ntx * 8) + 0x20c; if (sc->b2b_mw >= 0) { /* In NTB-to-NTB mode each side has own scratchpads. */ sc->spad_count1 = PLX_NUM_SPAD; bus_write_4(sc->conf_res, sc->spad_off2, 0x12345678); if (bus_read_4(sc->conf_res, sc->spad_off2) == 0x12345678) sc->spad_count2 = PLX_NUM_SPAD_PATT; } else { /* Otherwise we have share scratchpads with the peer. */ if (sc->link) { sc->spad_off1 += PLX_NUM_SPAD / 2 * 4; sc->spad_off2 += PLX_NUM_SPAD_PATT / 2 * 4; } else { sc->spad_offp1 += PLX_NUM_SPAD / 2 * 4; sc->spad_offp2 += PLX_NUM_SPAD_PATT / 2 * 4; } sc->spad_count1 = PLX_NUM_SPAD / 2; bus_write_4(sc->conf_res, sc->spad_off2, 0x12345678); if (bus_read_4(sc->conf_res, sc->spad_off2) == 0x12345678) sc->spad_count2 = PLX_NUM_SPAD_PATT / 2; } /* Apply static part of NTB configuration. */ ntb_plx_init(dev); /* Allocate and setup interrupts. */ error = ntb_plx_setup_intr(dev); if (error) goto out; /* Attach children to this controller */ error = ntb_register_device(dev); out: if (error != 0) ntb_plx_detach(dev); return (error); } static int ntb_plx_detach(device_t dev) { struct ntb_plx_softc *sc = device_get_softc(dev); struct ntb_plx_mw_info *mw; int i; /* Detach & delete all children */ ntb_unregister_device(dev); /* Disable and free interrupts. */ ntb_plx_teardown_intr(dev); /* Free memory resources. */ for (i = 0; i < sc->mw_count; i++) { mw = &sc->mw_info[i]; bus_release_resource(dev, SYS_RES_MEMORY, mw->mw_rid, mw->mw_res); } bus_release_resource(dev, SYS_RES_MEMORY, sc->conf_rid, sc->conf_res); return (0); } static int ntb_plx_port_number(device_t dev) { struct ntb_plx_softc *sc = device_get_softc(dev); return (sc->link ? 1 : 0); } static int ntb_plx_peer_port_count(device_t dev) { return (1); } static int ntb_plx_peer_port_number(device_t dev, int pidx) { struct ntb_plx_softc *sc = device_get_softc(dev); if (pidx != 0) return (-EINVAL); return (sc->link ? 0 : 1); } static int ntb_plx_peer_port_idx(device_t dev, int port) { int peer_port; peer_port = ntb_plx_peer_port_number(dev, 0); if (peer_port == -EINVAL || port != peer_port) return (-EINVAL); return (0); } static bool ntb_plx_link_is_up(device_t dev, enum ntb_speed *speed, enum ntb_width *width) { uint16_t link; link = pcie_read_config(dev, PCIER_LINK_STA, 2); if (speed != NULL) *speed = (link & PCIEM_LINK_STA_SPEED); if (width != NULL) *width = (link & PCIEM_LINK_STA_WIDTH) >> 4; return ((link & PCIEM_LINK_STA_WIDTH) != 0); } static int ntb_plx_link_enable(device_t dev, enum ntb_speed speed __unused, enum ntb_width width __unused) { struct ntb_plx_softc *sc = device_get_softc(dev); uint32_t reg, val; /* The fact that we see the Link Interface means link is enabled. */ if (sc->link) { ntb_link_event(dev); return (0); } reg = PLX_PORT_CONTROL(sc); val = bus_read_4(sc->conf_res, reg); if ((val & (1 << (sc->port & 7))) == 0) { /* If already enabled, generate fake link event and exit. */ ntb_link_event(dev); return (0); } val &= ~(1 << (sc->port & 7)); bus_write_4(sc->conf_res, reg, val); return (0); } static int ntb_plx_link_disable(device_t dev) { struct ntb_plx_softc *sc = device_get_softc(dev); uint32_t reg, val; /* Link disable for Link Interface would be suicidal. */ if (sc->link) return (0); reg = PLX_PORT_CONTROL(sc); val = bus_read_4(sc->conf_res, reg); val |= (1 << (sc->port & 7)); bus_write_4(sc->conf_res, reg, val); return (0); } static bool ntb_plx_link_enabled(device_t dev) { struct ntb_plx_softc *sc = device_get_softc(dev); uint32_t reg, val; /* The fact that we see the Link Interface means link is enabled. */ if (sc->link) return (TRUE); reg = PLX_PORT_CONTROL(sc); val = bus_read_4(sc->conf_res, reg); return ((val & (1 << (sc->port & 7))) == 0); } static uint8_t ntb_plx_mw_count(device_t dev) { struct ntb_plx_softc *sc = device_get_softc(dev); uint8_t res; res = sc->mw_count; res += (1 << sc->split) - 1; if (sc->b2b_mw >= 0 && sc->b2b_off == 0) res--; /* B2B consumed whole window. */ return (res); } static unsigned ntb_plx_user_mw_to_idx(struct ntb_plx_softc *sc, unsigned uidx, unsigned *sp) { unsigned t; t = 1 << sc->split; if (uidx < t) { *sp = uidx; return (0); } *sp = 0; return (uidx - (t - 1)); } static int ntb_plx_mw_get_range(device_t dev, unsigned mw_idx, vm_paddr_t *base, caddr_t *vbase, size_t *size, size_t *align, size_t *align_size, bus_addr_t *plimit) { struct ntb_plx_softc *sc = device_get_softc(dev); struct ntb_plx_mw_info *mw; size_t off, ss; unsigned sp, split; mw_idx = ntb_plx_user_mw_to_idx(sc, mw_idx, &sp); if (mw_idx >= sc->mw_count) return (EINVAL); off = 0; if (mw_idx == sc->b2b_mw) { KASSERT(sc->b2b_off != 0, ("user shouldn't get non-shared b2b mw")); off = sc->b2b_off; } mw = &sc->mw_info[mw_idx]; split = (mw->mw_bar == 2) ? sc->split : 0; ss = (mw->mw_size - off) >> split; /* Local to remote memory window parameters. */ if (base != NULL) *base = mw->mw_pbase + off + ss * sp; if (vbase != NULL) *vbase = mw->mw_vbase + off + ss * sp; if (size != NULL) *size = ss; /* * Remote to local memory window translation address alignment. * Translation address has to be aligned to the BAR size, but A-LUT * entries re-map addresses can be aligned to 1/128 or 1/256 of it. * XXX: In B2B mode we can change BAR size (and so alignmet) live, * but there is no way to report it here, so report safe value. */ if (align != NULL) { if (sc->alut && mw->mw_bar == 2) *align = (mw->mw_size - off) / 128 / sc->alut; else *align = mw->mw_size - off; } /* * Remote to local memory window size alignment. * The chip has no limit registers, but A-LUT, when available, allows * access control with granularity of 1/128 or 1/256 of the BAR size. * XXX: In B2B case we can change BAR size live, but there is no way * to report it, so report half of the BAR size, that should be safe. * In non-B2B case there is no control at all, so report the BAR size. */ if (align_size != NULL) { if (sc->alut && mw->mw_bar == 2) *align_size = (mw->mw_size - off) / 128 / sc->alut; else if (sc->b2b_mw >= 0) *align_size = (mw->mw_size - off) / 2; else *align_size = mw->mw_size - off; } /* Remote to local memory window translation address upper limit. */ if (plimit != NULL) *plimit = mw->mw_64bit ? BUS_SPACE_MAXADDR : BUS_SPACE_MAXADDR_32BIT; return (0); } static int ntb_plx_mw_set_trans_internal(device_t dev, unsigned mw_idx) { struct ntb_plx_softc *sc = device_get_softc(dev); struct ntb_plx_mw_info *mw; uint64_t addr, eaddr, off, size, bsize, esize, val64; uint32_t val; unsigned i, sp, split; mw = &sc->mw_info[mw_idx]; off = (mw_idx == sc->b2b_mw) ? sc->b2b_off : 0; split = (mw->mw_bar == 2) ? sc->split : 0; /* Get BAR size. In case of split or B2RP we can't change it. */ if (split || sc->b2b_mw < 0) { bsize = mw->mw_size - off; } else { bsize = mw->splits[0].mw_xlat_size; if (!powerof2(bsize)) bsize = 1LL << flsll(bsize); if (bsize > 0 && bsize < 1024 * 1024) bsize = 1024 * 1024; } /* * While for B2B we can set any BAR size on a link side, for shared * window we can't go above preconfigured size due to BAR address * alignment requirements. */ if ((off & (bsize - 1)) != 0) return (EINVAL); /* In B2B mode set Link Interface BAR size/address. */ if (sc->b2b_mw >= 0 && mw->mw_64bit) { val64 = 0; if (bsize > 0) val64 = (~(bsize - 1) & ~0xfffff); val64 |= 0xc; PNTX_WRITE(sc, 0xe8 + (mw->mw_bar - 2) * 4, val64); PNTX_WRITE(sc, 0xe8 + (mw->mw_bar - 2) * 4 + 4, val64 >> 32); val64 = 0x2000000000000000 * mw->mw_bar + off; PNTX_WRITE(sc, PCIR_BAR(mw->mw_bar), val64); PNTX_WRITE(sc, PCIR_BAR(mw->mw_bar) + 4, val64 >> 32); } else if (sc->b2b_mw >= 0) { val = 0; if (bsize > 0) val = (~(bsize - 1) & ~0xfffff); PNTX_WRITE(sc, 0xe8 + (mw->mw_bar - 2) * 4, val); val64 = 0x20000000 * mw->mw_bar + off; PNTX_WRITE(sc, PCIR_BAR(mw->mw_bar), val64); } /* Set BARs address translation */ addr = split ? UINT64_MAX : mw->splits[0].mw_xlat_addr; if (mw->mw_64bit) { PNTX_WRITE(sc, 0xc3c + (mw->mw_bar - 2) * 4, addr); PNTX_WRITE(sc, 0xc3c + (mw->mw_bar - 2) * 4 + 4, addr >> 32); } else { PNTX_WRITE(sc, 0xc3c + (mw->mw_bar - 2) * 4, addr); } /* Configure and enable A-LUT if we need it. */ size = split ? 0 : mw->splits[0].mw_xlat_size; if (sc->alut && mw->mw_bar == 2 && (sc->split > 0 || ((addr & (bsize - 1)) != 0 || size != bsize))) { esize = bsize / (128 * sc->alut); for (i = sp = 0; i < 128 * sc->alut; i++) { if (i % (128 * sc->alut >> sc->split) == 0) { eaddr = addr = mw->splits[sp].mw_xlat_addr; size = mw->splits[sp++].mw_xlat_size; } val = sc->link ? 0 : 1; if (sc->alut == 1) val += 2 * sc->ntx; val *= 0x1000 * sc->alut; val += 0x38000 + i * 4 + (i >= 128 ? 0x0e00 : 0); bus_write_4(sc->conf_res, val, eaddr); bus_write_4(sc->conf_res, val + 0x400, eaddr >> 32); bus_write_4(sc->conf_res, val + 0x800, (eaddr < addr + size) ? 0x3 : 0); eaddr += esize; } NTX_WRITE(sc, 0xc94, 0x10000000); } else if (sc->alut && mw->mw_bar == 2) NTX_WRITE(sc, 0xc94, 0); return (0); } static int ntb_plx_mw_set_trans(device_t dev, unsigned mw_idx, bus_addr_t addr, size_t size) { struct ntb_plx_softc *sc = device_get_softc(dev); struct ntb_plx_mw_info *mw; unsigned sp; mw_idx = ntb_plx_user_mw_to_idx(sc, mw_idx, &sp); if (mw_idx >= sc->mw_count) return (EINVAL); mw = &sc->mw_info[mw_idx]; if (!mw->mw_64bit && ((addr & UINT32_MAX) != addr || ((addr + size) & UINT32_MAX) != (addr + size))) return (ERANGE); mw->splits[sp].mw_xlat_addr = addr; mw->splits[sp].mw_xlat_size = size; return (ntb_plx_mw_set_trans_internal(dev, mw_idx)); } static int ntb_plx_mw_clear_trans(device_t dev, unsigned mw_idx) { return (ntb_plx_mw_set_trans(dev, mw_idx, 0, 0)); } static int ntb_plx_mw_get_wc(device_t dev, unsigned mw_idx, vm_memattr_t *mode) { struct ntb_plx_softc *sc = device_get_softc(dev); struct ntb_plx_mw_info *mw; unsigned sp; mw_idx = ntb_plx_user_mw_to_idx(sc, mw_idx, &sp); if (mw_idx >= sc->mw_count) return (EINVAL); mw = &sc->mw_info[mw_idx]; *mode = mw->splits[sp].mw_map_mode; return (0); } static int ntb_plx_mw_set_wc(device_t dev, unsigned mw_idx, vm_memattr_t mode) { struct ntb_plx_softc *sc = device_get_softc(dev); struct ntb_plx_mw_info *mw; uint64_t off, ss; int rc; unsigned sp, split; mw_idx = ntb_plx_user_mw_to_idx(sc, mw_idx, &sp); if (mw_idx >= sc->mw_count) return (EINVAL); mw = &sc->mw_info[mw_idx]; if (mw->splits[sp].mw_map_mode == mode) return (0); off = 0; if (mw_idx == sc->b2b_mw) { KASSERT(sc->b2b_off != 0, ("user shouldn't get non-shared b2b mw")); off = sc->b2b_off; } split = (mw->mw_bar == 2) ? sc->split : 0; ss = (mw->mw_size - off) >> split; rc = pmap_change_attr((vm_offset_t)mw->mw_vbase + off + ss * sp, ss, mode); if (rc == 0) mw->splits[sp].mw_map_mode = mode; return (rc); } static uint8_t ntb_plx_spad_count(device_t dev) { struct ntb_plx_softc *sc = device_get_softc(dev); return (sc->spad_count1 + sc->spad_count2); } static int ntb_plx_spad_write(device_t dev, unsigned int idx, uint32_t val) { struct ntb_plx_softc *sc = device_get_softc(dev); u_int off; if (idx >= sc->spad_count1 + sc->spad_count2) return (EINVAL); if (idx < sc->spad_count1) off = sc->spad_off1 + idx * 4; else off = sc->spad_off2 + (idx - sc->spad_count1) * 4; bus_write_4(sc->conf_res, off, val); return (0); } static void ntb_plx_spad_clear(device_t dev) { struct ntb_plx_softc *sc = device_get_softc(dev); int i; for (i = 0; i < sc->spad_count1 + sc->spad_count2; i++) ntb_plx_spad_write(dev, i, 0); } static int ntb_plx_spad_read(device_t dev, unsigned int idx, uint32_t *val) { struct ntb_plx_softc *sc = device_get_softc(dev); u_int off; if (idx >= sc->spad_count1 + sc->spad_count2) return (EINVAL); if (idx < sc->spad_count1) off = sc->spad_off1 + idx * 4; else off = sc->spad_off2 + (idx - sc->spad_count1) * 4; *val = bus_read_4(sc->conf_res, off); return (0); } static int ntb_plx_peer_spad_write(device_t dev, unsigned int idx, uint32_t val) { struct ntb_plx_softc *sc = device_get_softc(dev); u_int off; if (idx >= sc->spad_count1 + sc->spad_count2) return (EINVAL); if (idx < sc->spad_count1) off = sc->spad_offp1 + idx * 4; else off = sc->spad_offp2 + (idx - sc->spad_count1) * 4; if (sc->b2b_mw >= 0) bus_write_4(sc->mw_info[sc->b2b_mw].mw_res, off, val); else bus_write_4(sc->conf_res, off, val); return (0); } static int ntb_plx_peer_spad_read(device_t dev, unsigned int idx, uint32_t *val) { struct ntb_plx_softc *sc = device_get_softc(dev); u_int off; if (idx >= sc->spad_count1 + sc->spad_count2) return (EINVAL); if (idx < sc->spad_count1) off = sc->spad_offp1 + idx * 4; else off = sc->spad_offp2 + (idx - sc->spad_count1) * 4; if (sc->b2b_mw >= 0) *val = bus_read_4(sc->mw_info[sc->b2b_mw].mw_res, off); else *val = bus_read_4(sc->conf_res, off); return (0); } static uint64_t ntb_plx_db_valid_mask(device_t dev) { return ((1LL << PLX_NUM_DB) - 1); } static int ntb_plx_db_vector_count(device_t dev) { return (1); } static uint64_t ntb_plx_db_vector_mask(device_t dev, uint32_t vector) { if (vector > 0) return (0); return ((1LL << PLX_NUM_DB) - 1); } static void ntb_plx_db_clear(device_t dev, uint64_t bits) { struct ntb_plx_softc *sc = device_get_softc(dev); NTX_WRITE(sc, sc->link ? 0xc60 : 0xc50, bits); } static void ntb_plx_db_clear_mask(device_t dev, uint64_t bits) { struct ntb_plx_softc *sc = device_get_softc(dev); NTX_WRITE(sc, sc->link ? 0xc68 : 0xc58, bits); } static uint64_t ntb_plx_db_read(device_t dev) { struct ntb_plx_softc *sc = device_get_softc(dev); return (NTX_READ(sc, sc->link ? 0xc5c : 0xc4c)); } static void ntb_plx_db_set_mask(device_t dev, uint64_t bits) { struct ntb_plx_softc *sc = device_get_softc(dev); NTX_WRITE(sc, sc->link ? 0xc64 : 0xc54, bits); } static int ntb_plx_peer_db_addr(device_t dev, bus_addr_t *db_addr, vm_size_t *db_size) { struct ntb_plx_softc *sc = device_get_softc(dev); struct ntb_plx_mw_info *mw; KASSERT((db_addr != NULL && db_size != NULL), ("must be non-NULL")); if (sc->b2b_mw >= 0) { mw = &sc->mw_info[sc->b2b_mw]; *db_addr = (uint64_t)mw->mw_pbase + PLX_NTX_BASE(sc) + 0xc4c; } else { *db_addr = rman_get_start(sc->conf_res) + PLX_NTX_BASE(sc); *db_addr += sc->link ? 0xc4c : 0xc5c; } *db_size = 4; return (0); } static void ntb_plx_peer_db_set(device_t dev, uint64_t bit) { struct ntb_plx_softc *sc = device_get_softc(dev); if (sc->b2b_mw >= 0) BNTX_WRITE(sc, 0xc4c, bit); else NTX_WRITE(sc, sc->link ? 0xc4c : 0xc5c, bit); } static device_method_t ntb_plx_methods[] = { /* Device interface */ DEVMETHOD(device_probe, ntb_plx_probe), DEVMETHOD(device_attach, ntb_plx_attach), DEVMETHOD(device_detach, ntb_plx_detach), /* Bus interface */ DEVMETHOD(bus_child_location, ntb_child_location), DEVMETHOD(bus_print_child, ntb_print_child), DEVMETHOD(bus_get_dma_tag, ntb_get_dma_tag), /* NTB interface */ DEVMETHOD(ntb_port_number, ntb_plx_port_number), DEVMETHOD(ntb_peer_port_count, ntb_plx_peer_port_count), DEVMETHOD(ntb_peer_port_number, ntb_plx_peer_port_number), DEVMETHOD(ntb_peer_port_idx, ntb_plx_peer_port_idx), DEVMETHOD(ntb_link_is_up, ntb_plx_link_is_up), DEVMETHOD(ntb_link_enable, ntb_plx_link_enable), DEVMETHOD(ntb_link_disable, ntb_plx_link_disable), DEVMETHOD(ntb_link_enabled, ntb_plx_link_enabled), DEVMETHOD(ntb_mw_count, ntb_plx_mw_count), DEVMETHOD(ntb_mw_get_range, ntb_plx_mw_get_range), DEVMETHOD(ntb_mw_set_trans, ntb_plx_mw_set_trans), DEVMETHOD(ntb_mw_clear_trans, ntb_plx_mw_clear_trans), DEVMETHOD(ntb_mw_get_wc, ntb_plx_mw_get_wc), DEVMETHOD(ntb_mw_set_wc, ntb_plx_mw_set_wc), DEVMETHOD(ntb_spad_count, ntb_plx_spad_count), DEVMETHOD(ntb_spad_clear, ntb_plx_spad_clear), DEVMETHOD(ntb_spad_write, ntb_plx_spad_write), DEVMETHOD(ntb_spad_read, ntb_plx_spad_read), DEVMETHOD(ntb_peer_spad_write, ntb_plx_peer_spad_write), DEVMETHOD(ntb_peer_spad_read, ntb_plx_peer_spad_read), DEVMETHOD(ntb_db_valid_mask, ntb_plx_db_valid_mask), DEVMETHOD(ntb_db_vector_count, ntb_plx_db_vector_count), DEVMETHOD(ntb_db_vector_mask, ntb_plx_db_vector_mask), DEVMETHOD(ntb_db_clear, ntb_plx_db_clear), DEVMETHOD(ntb_db_clear_mask, ntb_plx_db_clear_mask), DEVMETHOD(ntb_db_read, ntb_plx_db_read), DEVMETHOD(ntb_db_set_mask, ntb_plx_db_set_mask), DEVMETHOD(ntb_peer_db_addr, ntb_plx_peer_db_addr), DEVMETHOD(ntb_peer_db_set, ntb_plx_peer_db_set), DEVMETHOD_END }; static DEFINE_CLASS_0(ntb_hw, ntb_plx_driver, ntb_plx_methods, sizeof(struct ntb_plx_softc)); DRIVER_MODULE(ntb_hw_plx, pci, ntb_plx_driver, ntb_hw_devclass, NULL, NULL); MODULE_DEPEND(ntb_hw_plx, ntb, 1, 1, 1); MODULE_VERSION(ntb_hw_plx, 1);