/*- * FreeBSD/CAM specific routines for LSI '909 FC adapters. * FreeBSD Version. * * Copyright (c) 2000, 2001 by Greg Ansley * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice immediately at the beginning of the file, without modification, * this list of conditions, and the following disclaimer. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /*- * Copyright (c) 2002, 2006 by Matthew Jacob * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are * met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon including * a substantially similar Disclaimer requirement for further binary * redistribution. * 3. Neither the names of the above listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * Support from Chris Ellsworth in order to make SAS adapters work * is gratefully acknowledged. */ /*- * Copyright (c) 2004, Avid Technology, Inc. and its contributors. * Copyright (c) 2005, WHEEL Sp. z o.o. * Copyright (c) 2004, 2005 Justin T. Gibbs * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are * met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon including * a substantially similar Disclaimer requirement for further binary * redistribution. * 3. Neither the names of the above listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include #include #include #include "dev/mpt/mpilib/mpi_ioc.h" /* XXX Fix Event Handling!!! */ #include "dev/mpt/mpilib/mpi_init.h" #include "dev/mpt/mpilib/mpi_targ.h" #include "dev/mpt/mpilib/mpi_fc.h" #include #include static void mpt_poll(struct cam_sim *); static timeout_t mpt_timeout; static void mpt_action(struct cam_sim *, union ccb *); static int mpt_setwidth(struct mpt_softc *, int, int); static int mpt_setsync(struct mpt_softc *, int, int, int); static void mpt_calc_geometry(struct ccb_calc_geometry *ccg, int extended); static mpt_reply_handler_t mpt_scsi_reply_handler; static mpt_reply_handler_t mpt_scsi_tmf_reply_handler; static mpt_reply_handler_t mpt_fc_els_reply_handler; static int mpt_scsi_reply_frame_handler(struct mpt_softc *, request_t *, MSG_DEFAULT_REPLY *); static int mpt_bus_reset(struct mpt_softc *, int); static int mpt_fc_reset_link(struct mpt_softc *, int); static int mpt_spawn_recovery_thread(struct mpt_softc *mpt); static void mpt_terminate_recovery_thread(struct mpt_softc *mpt); static void mpt_recovery_thread(void *arg); static void mpt_recover_commands(struct mpt_softc *mpt); static int mpt_scsi_send_tmf(struct mpt_softc *, u_int, u_int, u_int, u_int, u_int, u_int, int); static void mpt_fc_add_els(struct mpt_softc *mpt, request_t *); static void mpt_post_target_command(struct mpt_softc *, request_t *, int); static void mpt_add_target_commands(struct mpt_softc *mpt); static int mpt_enable_lun(struct mpt_softc *, target_id_t, lun_id_t); static int mpt_disable_lun(struct mpt_softc *, target_id_t, lun_id_t); static void mpt_target_start_io(struct mpt_softc *, union ccb *); static cam_status mpt_abort_target_ccb(struct mpt_softc *, union ccb *); static int mpt_abort_target_cmd(struct mpt_softc *, request_t *); static void mpt_scsi_tgt_status(struct mpt_softc *, union ccb *, request_t *, uint8_t, uint8_t const *); static void mpt_scsi_tgt_tsk_mgmt(struct mpt_softc *, request_t *, mpt_task_mgmt_t, tgt_resource_t *, int); static void mpt_tgt_dump_tgt_state(struct mpt_softc *, request_t *); static void mpt_tgt_dump_req_state(struct mpt_softc *, request_t *); static mpt_reply_handler_t mpt_scsi_tgt_reply_handler; static uint32_t scsi_io_handler_id = MPT_HANDLER_ID_NONE; static uint32_t scsi_tmf_handler_id = MPT_HANDLER_ID_NONE; static uint32_t fc_els_handler_id = MPT_HANDLER_ID_NONE; static mpt_probe_handler_t mpt_cam_probe; static mpt_attach_handler_t mpt_cam_attach; static mpt_enable_handler_t mpt_cam_enable; static mpt_event_handler_t mpt_cam_event; static mpt_reset_handler_t mpt_cam_ioc_reset; static mpt_detach_handler_t mpt_cam_detach; static struct mpt_personality mpt_cam_personality = { .name = "mpt_cam", .probe = mpt_cam_probe, .attach = mpt_cam_attach, .enable = mpt_cam_enable, .event = mpt_cam_event, .reset = mpt_cam_ioc_reset, .detach = mpt_cam_detach, }; DECLARE_MPT_PERSONALITY(mpt_cam, SI_ORDER_SECOND); int mpt_cam_probe(struct mpt_softc *mpt) { /* * Only attach to nodes that support the initiator or target * role or have RAID physical devices that need CAM pass-thru support. */ if ((mpt->mpt_proto_flags & MPI_PORTFACTS_PROTOCOL_INITIATOR) != 0 || (mpt->mpt_proto_flags & MPI_PORTFACTS_PROTOCOL_TARGET) != 0 || (mpt->ioc_page2 != NULL && mpt->ioc_page2->MaxPhysDisks != 0)) { return (0); } return (ENODEV); } int mpt_cam_attach(struct mpt_softc *mpt) { struct cam_devq *devq; mpt_handler_t handler; int maxq; int error; TAILQ_INIT(&mpt->request_timeout_list); maxq = (mpt->mpt_global_credits < MPT_MAX_REQUESTS(mpt))? mpt->mpt_global_credits : MPT_MAX_REQUESTS(mpt); handler.reply_handler = mpt_scsi_reply_handler; error = mpt_register_handler(mpt, MPT_HANDLER_REPLY, handler, &scsi_io_handler_id); if (error != 0) { goto cleanup; } handler.reply_handler = mpt_scsi_tmf_reply_handler; error = mpt_register_handler(mpt, MPT_HANDLER_REPLY, handler, &scsi_tmf_handler_id); if (error != 0) { goto cleanup; } /* * We keep two requests reserved for ELS replies/responses * if we're fibre channel and target mode. */ if (mpt->is_fc && (mpt->role & MPT_ROLE_TARGET) != 0) { request_t *req; int i; handler.reply_handler = mpt_fc_els_reply_handler; error = mpt_register_handler(mpt, MPT_HANDLER_REPLY, handler, &fc_els_handler_id); if (error != 0) { goto cleanup; } /* * Feed the chip some ELS buffer resources */ for (i = 0; i < MPT_MAX_ELS; i++) { req = mpt_get_request(mpt, FALSE); if (req == NULL) { break; } mpt_fc_add_els(mpt, req); } if (i == 0) { mpt_prt(mpt, "Unable to add ELS buffer resources\n"); goto cleanup; } maxq -= i; } /* * If we're in target mode, register a reply * handler for it and add some commands. */ if ((mpt->role & MPT_ROLE_TARGET) != 0) { handler.reply_handler = mpt_scsi_tgt_reply_handler; error = mpt_register_handler(mpt, MPT_HANDLER_REPLY, handler, &mpt->scsi_tgt_handler_id); if (error != 0) { goto cleanup; } /* * Add some target command resources */ mpt_add_target_commands(mpt); } /* * We keep one request reserved for timeout TMF requests. */ mpt->tmf_req = mpt_get_request(mpt, FALSE); if (mpt->tmf_req == NULL) { mpt_prt(mpt, "Unable to allocate dedicated TMF request!\n"); error = ENOMEM; goto cleanup; } /* * Mark the request as free even though not on the free list. * There is only one TMF request allowed to be outstanding at * a time and the TMF routines perform their own allocation * tracking using the standard state flags. */ mpt->tmf_req->state = REQ_STATE_FREE; maxq--; if (mpt_spawn_recovery_thread(mpt) != 0) { mpt_prt(mpt, "Unable to spawn recovery thread!\n"); error = ENOMEM; goto cleanup; } /* * Create the device queue for our SIM(s). */ devq = cam_simq_alloc(maxq); if (devq == NULL) { mpt_prt(mpt, "Unable to allocate CAM SIMQ!\n"); error = ENOMEM; goto cleanup; } /* * Construct our SIM entry. */ mpt->sim = cam_sim_alloc(mpt_action, mpt_poll, "mpt", mpt, mpt->unit, 1, maxq, devq); if (mpt->sim == NULL) { mpt_prt(mpt, "Unable to allocate CAM SIM!\n"); cam_simq_free(devq); error = ENOMEM; goto cleanup; } /* * Register exactly the bus. */ if (xpt_bus_register(mpt->sim, 0) != CAM_SUCCESS) { mpt_prt(mpt, "Bus registration Failed!\n"); error = ENOMEM; goto cleanup; } if (xpt_create_path(&mpt->path, NULL, cam_sim_path(mpt->sim), CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { mpt_prt(mpt, "Unable to allocate Path!\n"); error = ENOMEM; goto cleanup; } /* * Only register a second bus for RAID physical * devices if the controller supports RAID. */ if (mpt->ioc_page2 == NULL || mpt->ioc_page2->MaxPhysDisks == 0) { return (0); } /* * Create a "bus" to export all hidden disks to CAM. */ mpt->phydisk_sim = cam_sim_alloc(mpt_action, mpt_poll, "mpt", mpt, mpt->unit, 1, maxq, devq); if (mpt->phydisk_sim == NULL) { mpt_prt(mpt, "Unable to allocate Physical Disk CAM SIM!\n"); error = ENOMEM; goto cleanup; } /* * Register exactly the bus. */ if (xpt_bus_register(mpt->phydisk_sim, 1) != CAM_SUCCESS) { mpt_prt(mpt, "Physical Disk Bus registration Failed!\n"); error = ENOMEM; goto cleanup; } if (xpt_create_path(&mpt->phydisk_path, NULL, cam_sim_path(mpt->phydisk_sim), CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { mpt_prt(mpt, "Unable to allocate Physical Disk Path!\n"); error = ENOMEM; goto cleanup; } return (0); cleanup: mpt_cam_detach(mpt); return (error); } /* * Read FC configuration information */ static int mpt_read_config_info_fc(struct mpt_softc *mpt) { char *topology = NULL; int rv, speed = 0; rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_FC_PORT, 0, 0, &mpt->mpt_fcport_page0.Header, FALSE, 5000); if (rv) { return (-1); } mpt_lprt(mpt, MPT_PRT_DEBUG, "FC Port Page 0 Header: %x %x %x %x\n", mpt->mpt_fcport_page0.Header.PageVersion, mpt->mpt_fcport_page0.Header.PageLength, mpt->mpt_fcport_page0.Header.PageNumber, mpt->mpt_fcport_page0.Header.PageType); rv = mpt_read_cur_cfg_page(mpt, 0, &mpt->mpt_fcport_page0.Header, sizeof(mpt->mpt_fcport_page0), FALSE, 5000); if (rv) { mpt_prt(mpt, "failed to read FC Port Page 0\n"); return (-1); } speed = mpt->mpt_fcport_page0.CurrentSpeed; switch (mpt->mpt_fcport_page0.Flags & MPI_FCPORTPAGE0_FLAGS_ATTACH_TYPE_MASK) { case MPI_FCPORTPAGE0_FLAGS_ATTACH_NO_INIT: speed = 0; topology = ""; break; case MPI_FCPORTPAGE0_FLAGS_ATTACH_POINT_TO_POINT: topology = "N-Port"; break; case MPI_FCPORTPAGE0_FLAGS_ATTACH_PRIVATE_LOOP: topology = "NL-Port"; break; case MPI_FCPORTPAGE0_FLAGS_ATTACH_FABRIC_DIRECT: topology = "F-Port"; break; case MPI_FCPORTPAGE0_FLAGS_ATTACH_PUBLIC_LOOP: topology = "FL-Port"; break; default: speed = 0; topology = "?"; break; } mpt_lprt(mpt, MPT_PRT_INFO, "FC Port Page 0: Topology <%s> WWNN 0x%08x%08x WWPN 0x%08x%08x " "Speed %u-Gbit\n", topology, mpt->mpt_fcport_page0.WWNN.High, mpt->mpt_fcport_page0.WWNN.Low, mpt->mpt_fcport_page0.WWPN.High, mpt->mpt_fcport_page0.WWPN.Low, speed); return (0); } /* * Set FC configuration information. */ static int mpt_set_initial_config_fc(struct mpt_softc *mpt) { #if 0 CONFIG_PAGE_FC_PORT_1 fc; U32 fl; int r, doit = 0; if ((mpt->role & MPT_ROLE_TARGET) == 0) { return (0); } r = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_FC_PORT, 1, 0, &fc.Header, FALSE, 5000); if (r) { return (mpt_fc_reset_link(mpt, 1)); } r = mpt_read_cfg_page(mpt, MPI_CONFIG_ACTION_PAGE_READ_CURRENT, 0, &fc.Header, sizeof (fc), FALSE, 5000); if (r) { return (mpt_fc_reset_link(mpt, 1)); } fl = le32toh(fc.Flags); if ((fl & MPI_FCPORTPAGE1_FLAGS_TARGET_MODE_OXID) == 0) { fl |= MPI_FCPORTPAGE1_FLAGS_TARGET_MODE_OXID; doit = 1; } if ((fl & MPI_FCPORTPAGE1_FLAGS_PROT_FCP_INIT) && (mpt->role & MPT_ROLE_INITIATOR) == 0) { fl &= ~MPI_FCPORTPAGE1_FLAGS_PROT_FCP_INIT; doit = 1; } if ((fl & MPI_FCPORTPAGE1_FLAGS_PROT_FCP_TARG) && (mpt->role & MPT_ROLE_TARGET) == 0) { fl &= ~MPI_FCPORTPAGE1_FLAGS_PROT_FCP_TARG; doit = 1; } if (doit) { const char *cc; mpt_lprt(mpt, MPT_PRT_INFO, "FC Port Page 1: New Flags %x \n", fl); fc.Flags = htole32(fl); r = mpt_write_cfg_page(mpt, MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT, 0, &fc.Header, sizeof(fc), FALSE, 5000); if (r != 0) { cc = "FC PORT PAGE1 UPDATE: FAILED\n"; } else { cc = "FC PORT PAGE1 UPDATED: SYSTEM NEEDS RESET\n"; } mpt_prt(mpt, cc); } #else if ((mpt->role & MPT_ROLE_TARGET) == 0) { return (0); } #endif return (mpt_fc_reset_link(mpt, 1)); } /* * Read SAS configuration information. Nothing to do yet. */ static int mpt_read_config_info_sas(struct mpt_softc *mpt) { return (0); } /* * Set SAS configuration information. Nothing to do yet. */ static int mpt_set_initial_config_sas(struct mpt_softc *mpt) { return (0); } /* * Read SCSI configuration information */ static int mpt_read_config_info_spi(struct mpt_softc *mpt) { int rv, i; rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_SCSI_PORT, 0, 0, &mpt->mpt_port_page0.Header, /*sleep_ok*/FALSE, /*timeout_ms*/5000); if (rv) return (-1); mpt_lprt(mpt, MPT_PRT_DEBUG, "SPI Port Page 0 Header: %x %x %x %x\n", mpt->mpt_port_page0.Header.PageVersion, mpt->mpt_port_page0.Header.PageLength, mpt->mpt_port_page0.Header.PageNumber, mpt->mpt_port_page0.Header.PageType); rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_SCSI_PORT, 1, 0, &mpt->mpt_port_page1.Header, /*sleep_ok*/FALSE, /*timeout_ms*/5000); if (rv) return (-1); mpt_lprt(mpt, MPT_PRT_DEBUG, "SPI Port Page 1 Header: %x %x %x %x\n", mpt->mpt_port_page1.Header.PageVersion, mpt->mpt_port_page1.Header.PageLength, mpt->mpt_port_page1.Header.PageNumber, mpt->mpt_port_page1.Header.PageType); rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_SCSI_PORT, 2, /*PageAddress*/0, &mpt->mpt_port_page2.Header, /*sleep_ok*/FALSE, /*timeout_ms*/5000); if (rv) return (-1); mpt_lprt(mpt, MPT_PRT_DEBUG, "SPI Port Page 2 Header: %x %x %x %x\n", mpt->mpt_port_page1.Header.PageVersion, mpt->mpt_port_page1.Header.PageLength, mpt->mpt_port_page1.Header.PageNumber, mpt->mpt_port_page1.Header.PageType); for (i = 0; i < 16; i++) { rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_SCSI_DEVICE, 0, i, &mpt->mpt_dev_page0[i].Header, /*sleep_ok*/FALSE, /*timeout_ms*/5000); if (rv) return (-1); mpt_lprt(mpt, MPT_PRT_DEBUG, "SPI Target %d Device Page 0 Header: %x %x %x %x\n", i, mpt->mpt_dev_page0[i].Header.PageVersion, mpt->mpt_dev_page0[i].Header.PageLength, mpt->mpt_dev_page0[i].Header.PageNumber, mpt->mpt_dev_page0[i].Header.PageType); rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_SCSI_DEVICE, 1, i, &mpt->mpt_dev_page1[i].Header, /*sleep_ok*/FALSE, /*timeout_ms*/5000); if (rv) return (-1); mpt_lprt(mpt, MPT_PRT_DEBUG, "SPI Target %d Device Page 1 Header: %x %x %x %x\n", i, mpt->mpt_dev_page1[i].Header.PageVersion, mpt->mpt_dev_page1[i].Header.PageLength, mpt->mpt_dev_page1[i].Header.PageNumber, mpt->mpt_dev_page1[i].Header.PageType); } /* * At this point, we don't *have* to fail. As long as we have * valid config header information, we can (barely) lurch * along. */ rv = mpt_read_cur_cfg_page(mpt, /*PageAddress*/0, &mpt->mpt_port_page0.Header, sizeof(mpt->mpt_port_page0), /*sleep_ok*/FALSE, /*timeout_ms*/5000); if (rv) { mpt_prt(mpt, "failed to read SPI Port Page 0\n"); } else { mpt_lprt(mpt, MPT_PRT_DEBUG, "SPI Port Page 0: Capabilities %x PhysicalInterface %x\n", mpt->mpt_port_page0.Capabilities, mpt->mpt_port_page0.PhysicalInterface); } rv = mpt_read_cur_cfg_page(mpt, /*PageAddress*/0, &mpt->mpt_port_page1.Header, sizeof(mpt->mpt_port_page1), /*sleep_ok*/FALSE, /*timeout_ms*/5000); if (rv) { mpt_prt(mpt, "failed to read SPI Port Page 1\n"); } else { mpt_lprt(mpt, MPT_PRT_DEBUG, "SPI Port Page 1: Configuration %x OnBusTimerValue %x\n", mpt->mpt_port_page1.Configuration, mpt->mpt_port_page1.OnBusTimerValue); } rv = mpt_read_cur_cfg_page(mpt, /*PageAddress*/0, &mpt->mpt_port_page2.Header, sizeof(mpt->mpt_port_page2), /*sleep_ok*/FALSE, /*timeout_ms*/5000); if (rv) { mpt_prt(mpt, "failed to read SPI Port Page 2\n"); } else { mpt_lprt(mpt, MPT_PRT_DEBUG, "SPI Port Page 2: Flags %x Settings %x\n", mpt->mpt_port_page2.PortFlags, mpt->mpt_port_page2.PortSettings); for (i = 0; i < 16; i++) { mpt_lprt(mpt, MPT_PRT_DEBUG, "SPI Port Page 2 Tgt %d: timo %x SF %x Flags %x\n", i, mpt->mpt_port_page2.DeviceSettings[i].Timeout, mpt->mpt_port_page2.DeviceSettings[i].SyncFactor, mpt->mpt_port_page2.DeviceSettings[i].DeviceFlags); } } for (i = 0; i < 16; i++) { rv = mpt_read_cur_cfg_page(mpt, /*PageAddress*/i, &mpt->mpt_dev_page0[i].Header, sizeof(*mpt->mpt_dev_page0), /*sleep_ok*/FALSE, /*timeout_ms*/5000); if (rv) { mpt_prt(mpt, "cannot read SPI Tgt %d Device Page 0\n", i); continue; } mpt_lprt(mpt, MPT_PRT_DEBUG, "SPI Tgt %d Page 0: NParms %x Information %x", i, mpt->mpt_dev_page0[i].NegotiatedParameters, mpt->mpt_dev_page0[i].Information); rv = mpt_read_cur_cfg_page(mpt, /*PageAddress*/i, &mpt->mpt_dev_page1[i].Header, sizeof(*mpt->mpt_dev_page1), /*sleep_ok*/FALSE, /*timeout_ms*/5000); if (rv) { mpt_prt(mpt, "cannot read SPI Tgt %d Device Page 1\n", i); continue; } mpt_lprt(mpt, MPT_PRT_DEBUG, "SPI Tgt %d Page 1: RParms %x Configuration %x\n", i, mpt->mpt_dev_page1[i].RequestedParameters, mpt->mpt_dev_page1[i].Configuration); } return (0); } /* * Validate SPI configuration information. * * In particular, validate SPI Port Page 1. */ static int mpt_set_initial_config_spi(struct mpt_softc *mpt) { int i, pp1val = ((1 << mpt->mpt_ini_id) << 16) | mpt->mpt_ini_id; int error; mpt->mpt_disc_enable = 0xff; mpt->mpt_tag_enable = 0; if (mpt->mpt_port_page1.Configuration != pp1val) { CONFIG_PAGE_SCSI_PORT_1 tmp; mpt_prt(mpt, "SPI Port Page 1 Config value bad (%x)- should be %x\n", mpt->mpt_port_page1.Configuration, pp1val); tmp = mpt->mpt_port_page1; tmp.Configuration = pp1val; error = mpt_write_cur_cfg_page(mpt, /*PageAddress*/0, &tmp.Header, sizeof(tmp), /*sleep_ok*/FALSE, /*timeout_ms*/5000); if (error) return (-1); error = mpt_read_cur_cfg_page(mpt, /*PageAddress*/0, &tmp.Header, sizeof(tmp), /*sleep_ok*/FALSE, /*timeout_ms*/5000); if (error) return (-1); if (tmp.Configuration != pp1val) { mpt_prt(mpt, "failed to reset SPI Port Page 1 Config value\n"); return (-1); } mpt->mpt_port_page1 = tmp; } for (i = 0; i < 16; i++) { CONFIG_PAGE_SCSI_DEVICE_1 tmp; tmp = mpt->mpt_dev_page1[i]; tmp.RequestedParameters = 0; tmp.Configuration = 0; mpt_lprt(mpt, MPT_PRT_DEBUG, "Set Tgt %d SPI DevicePage 1 values to %x 0 %x\n", i, tmp.RequestedParameters, tmp.Configuration); error = mpt_write_cur_cfg_page(mpt, /*PageAddress*/i, &tmp.Header, sizeof(tmp), /*sleep_ok*/FALSE, /*timeout_ms*/5000); if (error) return (-1); error = mpt_read_cur_cfg_page(mpt, /*PageAddress*/i, &tmp.Header, sizeof(tmp), /*sleep_ok*/FALSE, /*timeout_ms*/5000); if (error) return (-1); mpt->mpt_dev_page1[i] = tmp; mpt_lprt(mpt, MPT_PRT_DEBUG, "SPI Tgt %d Page 1: RParm %x Configuration %x\n", i, mpt->mpt_dev_page1[i].RequestedParameters, mpt->mpt_dev_page1[i].Configuration); } return (0); } int mpt_cam_enable(struct mpt_softc *mpt) { if (mpt->is_fc) { if (mpt_read_config_info_fc(mpt)) { return (EIO); } if (mpt_set_initial_config_fc(mpt)) { return (EIO); } } else if (mpt->is_sas) { if (mpt_read_config_info_sas(mpt)) { return (EIO); } if (mpt_set_initial_config_sas(mpt)) { return (EIO); } } else { if (mpt_read_config_info_spi(mpt)) { return (EIO); } if (mpt_set_initial_config_spi(mpt)) { return (EIO); } } return (0); } void mpt_cam_detach(struct mpt_softc *mpt) { mpt_handler_t handler; mpt_terminate_recovery_thread(mpt); handler.reply_handler = mpt_scsi_reply_handler; mpt_deregister_handler(mpt, MPT_HANDLER_REPLY, handler, scsi_io_handler_id); handler.reply_handler = mpt_scsi_tmf_reply_handler; mpt_deregister_handler(mpt, MPT_HANDLER_REPLY, handler, scsi_tmf_handler_id); handler.reply_handler = mpt_fc_els_reply_handler; mpt_deregister_handler(mpt, MPT_HANDLER_REPLY, handler, fc_els_handler_id); handler.reply_handler = mpt_scsi_tgt_reply_handler; mpt_deregister_handler(mpt, MPT_HANDLER_REPLY, handler, mpt->scsi_tgt_handler_id); if (mpt->tmf_req != NULL) { mpt_free_request(mpt, mpt->tmf_req); mpt->tmf_req = NULL; } if (mpt->sim != NULL) { xpt_free_path(mpt->path); xpt_bus_deregister(cam_sim_path(mpt->sim)); cam_sim_free(mpt->sim, TRUE); mpt->sim = NULL; } if (mpt->phydisk_sim != NULL) { xpt_free_path(mpt->phydisk_path); xpt_bus_deregister(cam_sim_path(mpt->phydisk_sim)); cam_sim_free(mpt->phydisk_sim, TRUE); mpt->phydisk_sim = NULL; } } /* This routine is used after a system crash to dump core onto the swap device. */ static void mpt_poll(struct cam_sim *sim) { struct mpt_softc *mpt; mpt = (struct mpt_softc *)cam_sim_softc(sim); MPT_LOCK(mpt); mpt_intr(mpt); MPT_UNLOCK(mpt); } /* * Watchdog timeout routine for SCSI requests. */ static void mpt_timeout(void *arg) { union ccb *ccb; struct mpt_softc *mpt; request_t *req; ccb = (union ccb *)arg; mpt = ccb->ccb_h.ccb_mpt_ptr; MPT_LOCK(mpt); req = ccb->ccb_h.ccb_req_ptr; mpt_prt(mpt, "request %p:%u timed out for ccb %p (req->ccb %p)\n", req, req->serno, ccb, req->ccb); if ((req->state & REQ_STATE_QUEUED) == REQ_STATE_QUEUED) { TAILQ_REMOVE(&mpt->request_pending_list, req, links); TAILQ_INSERT_TAIL(&mpt->request_timeout_list, req, links); req->state |= REQ_STATE_TIMEDOUT; mpt_wakeup_recovery_thread(mpt); } MPT_UNLOCK(mpt); } /* * Callback routine from "bus_dmamap_load" or, in simple cases, called directly. * * Takes a list of physical segments and builds the SGL for SCSI IO command * and forwards the commard to the IOC after one last check that CAM has not * aborted the transaction. */ static void mpt_execute_req_a64(void *arg, bus_dma_segment_t *dm_segs, int nseg, int error) { request_t *req, *trq; char *mpt_off; union ccb *ccb; struct mpt_softc *mpt; int seg, first_lim; uint32_t flags, nxt_off; void *sglp; MSG_REQUEST_HEADER *hdrp; SGE_SIMPLE64 *se; SGE_CHAIN64 *ce; req = (request_t *)arg; ccb = req->ccb; mpt = ccb->ccb_h.ccb_mpt_ptr; req = ccb->ccb_h.ccb_req_ptr; hdrp = req->req_vbuf; mpt_off = req->req_vbuf; if (hdrp->Function == MPI_FUNCTION_SCSI_IO_REQUEST) { sglp = &((PTR_MSG_SCSI_IO_REQUEST)hdrp)->SGL; } else /* if (hdrp->Function == MPI_FUNCTION_TARGET_ASSIST) */ { sglp = &((PTR_MSG_TARGET_ASSIST_REQUEST)hdrp)->SGL; } if (error == 0 && ((uint32_t)nseg) >= mpt->max_seg_cnt) { error = EFBIG; } bad: if (error != 0) { if (error != EFBIG && error != ENOMEM) { mpt_prt(mpt, "mpt_execute_req: err %d\n", error); } if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INPROG) { cam_status status; mpt_freeze_ccb(ccb); if (error == EFBIG) { status = CAM_REQ_TOO_BIG; } else if (error == ENOMEM) { if (mpt->outofbeer == 0) { mpt->outofbeer = 1; xpt_freeze_simq(mpt->sim, 1); mpt_lprt(mpt, MPT_PRT_DEBUG, "FREEZEQ\n"); } status = CAM_REQUEUE_REQ; } else { status = CAM_REQ_CMP_ERR; } mpt_set_ccb_status(ccb, status); } if (hdrp->Function == MPI_FUNCTION_TARGET_ASSIST) { request_t *cmd_req = MPT_TAG_2_REQ(mpt, ccb->csio.tag_id); MPT_TGT_STATE(mpt, cmd_req)->state = TGT_STATE_IN_CAM; MPT_TGT_STATE(mpt, cmd_req)->ccb = NULL; MPT_TGT_STATE(mpt, cmd_req)->req = NULL; } ccb->ccb_h.status &= ~CAM_SIM_QUEUED; KASSERT(ccb->ccb_h.status, ("zero ccb sts at %d\n", __LINE__)); xpt_done(ccb); CAMLOCK_2_MPTLOCK(mpt); mpt_free_request(mpt, req); MPTLOCK_2_CAMLOCK(mpt); return; } /* * No data to transfer? * Just make a single simple SGL with zero length. */ if (mpt->verbose >= MPT_PRT_DEBUG) { int tidx = ((char *)sglp) - mpt_off; memset(&mpt_off[tidx], 0xff, MPT_REQUEST_AREA - tidx); } if (nseg == 0) { SGE_SIMPLE32 *se1 = (SGE_SIMPLE32 *) sglp; MPI_pSGE_SET_FLAGS(se1, (MPI_SGE_FLAGS_LAST_ELEMENT | MPI_SGE_FLAGS_END_OF_BUFFER | MPI_SGE_FLAGS_SIMPLE_ELEMENT | MPI_SGE_FLAGS_END_OF_LIST)); goto out; } flags = MPI_SGE_FLAGS_SIMPLE_ELEMENT | MPI_SGE_FLAGS_64_BIT_ADDRESSING; if (hdrp->Function == MPI_FUNCTION_SCSI_IO_REQUEST) { if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT) { flags |= MPI_SGE_FLAGS_HOST_TO_IOC; } } else { if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) { flags |= MPI_SGE_FLAGS_HOST_TO_IOC; } } if (!(ccb->ccb_h.flags & (CAM_SG_LIST_PHYS|CAM_DATA_PHYS))) { bus_dmasync_op_t op; if (hdrp->Function == MPI_FUNCTION_SCSI_IO_REQUEST) { if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) { op = BUS_DMASYNC_PREREAD; } else { op = BUS_DMASYNC_PREWRITE; } } else { if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) { op = BUS_DMASYNC_PREWRITE; } else { op = BUS_DMASYNC_PREREAD; } } bus_dmamap_sync(mpt->buffer_dmat, req->dmap, op); } /* * Okay, fill in what we can at the end of the command frame. * If we have up to MPT_NSGL_FIRST, we can fit them all into * the command frame. * * Otherwise, we fill up through MPT_NSGL_FIRST less one * SIMPLE64 pointers and start doing CHAIN64 entries after * that. */ if (nseg < MPT_NSGL_FIRST(mpt)) { first_lim = nseg; } else { /* * Leave room for CHAIN element */ first_lim = MPT_NSGL_FIRST(mpt) - 1; } se = (SGE_SIMPLE64 *) sglp; for (seg = 0; seg < first_lim; seg++, se++, dm_segs++) { uint32_t tf; memset(se, 0, sizeof (*se)); se->Address.Low = dm_segs->ds_addr; if (sizeof(bus_addr_t) > 4) { se->Address.High = ((uint64_t) dm_segs->ds_addr) >> 32; } MPI_pSGE_SET_LENGTH(se, dm_segs->ds_len); tf = flags; if (seg == first_lim - 1) { tf |= MPI_SGE_FLAGS_LAST_ELEMENT; } if (seg == nseg - 1) { tf |= MPI_SGE_FLAGS_END_OF_LIST | MPI_SGE_FLAGS_END_OF_BUFFER; } MPI_pSGE_SET_FLAGS(se, tf); } if (seg == nseg) { goto out; } /* * Tell the IOC where to find the first chain element. */ hdrp->ChainOffset = ((char *)se - (char *)hdrp) >> 2; nxt_off = MPT_RQSL(mpt); trq = req; /* * Make up the rest of the data segments out of a chain element * (contiained in the current request frame) which points to * SIMPLE64 elements in the next request frame, possibly ending * with *another* chain element (if there's more). */ while (seg < nseg) { int this_seg_lim; uint32_t tf, cur_off; bus_addr_t chain_list_addr; /* * Point to the chain descriptor. Note that the chain * descriptor is at the end of the *previous* list (whether * chain or simple). */ ce = (SGE_CHAIN64 *) se; /* * Before we change our current pointer, make sure we won't * overflow the request area with this frame. Note that we * test against 'greater than' here as it's okay in this case * to have next offset be just outside the request area. */ if ((nxt_off + MPT_RQSL(mpt)) > MPT_REQUEST_AREA) { nxt_off = MPT_REQUEST_AREA; goto next_chain; } /* * Set our SGE element pointer to the beginning of the chain * list and update our next chain list offset. */ se = (SGE_SIMPLE64 *) &mpt_off[nxt_off]; cur_off = nxt_off; nxt_off += MPT_RQSL(mpt); /* * Now initialized the chain descriptor. */ memset(ce, 0, sizeof (*ce)); /* * Get the physical address of the chain list. */ chain_list_addr = trq->req_pbuf; chain_list_addr += cur_off; if (sizeof (bus_addr_t) > 4) { ce->Address.High = (uint32_t) ((uint64_t)chain_list_addr >> 32); } ce->Address.Low = (uint32_t) chain_list_addr; ce->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT | MPI_SGE_FLAGS_64_BIT_ADDRESSING; /* * If we have more than a frame's worth of segments left, * set up the chain list to have the last element be another * chain descriptor. */ if ((nseg - seg) > MPT_NSGL(mpt)) { this_seg_lim = seg + MPT_NSGL(mpt) - 1; /* * The length of the chain is the length in bytes of the * number of segments plus the next chain element. * * The next chain descriptor offset is the length, * in words, of the number of segments. */ ce->Length = (this_seg_lim - seg) * sizeof (SGE_SIMPLE64); ce->NextChainOffset = ce->Length >> 2; ce->Length += sizeof (SGE_CHAIN64); } else { this_seg_lim = nseg; ce->Length = (this_seg_lim - seg) * sizeof (SGE_SIMPLE64); } /* * Fill in the chain list SGE elements with our segment data. * * If we're the last element in this chain list, set the last * element flag. If we're the completely last element period, * set the end of list and end of buffer flags. */ while (seg < this_seg_lim) { memset(se, 0, sizeof (*se)); se->Address.Low = dm_segs->ds_addr; if (sizeof (bus_addr_t) > 4) { se->Address.High = ((uint64_t)dm_segs->ds_addr) >> 32; } MPI_pSGE_SET_LENGTH(se, dm_segs->ds_len); tf = flags; if (seg == this_seg_lim - 1) { tf |= MPI_SGE_FLAGS_LAST_ELEMENT; } if (seg == nseg - 1) { tf |= MPI_SGE_FLAGS_END_OF_LIST | MPI_SGE_FLAGS_END_OF_BUFFER; } MPI_pSGE_SET_FLAGS(se, tf); se++; seg++; dm_segs++; } next_chain: /* * If we have more segments to do and we've used up all of * the space in a request area, go allocate another one * and chain to that. */ if (seg < nseg && nxt_off >= MPT_REQUEST_AREA) { request_t *nrq = mpt_get_request(mpt, FALSE); if (nrq == NULL) { error = ENOMEM; goto bad; } /* * Append the new request area on the tail of our list. */ if ((trq = req->chain) == NULL) { req->chain = nrq; } else { while (trq->chain != NULL) { trq = trq->chain; } trq->chain = nrq; } trq = nrq; mpt_off = trq->req_vbuf; if (mpt->verbose >= MPT_PRT_DEBUG) { memset(mpt_off, 0xff, MPT_REQUEST_AREA); } nxt_off = 0; } } out: /* * Last time we need to check if this CCB needs to be aborted. */ if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_INPROG) { if (hdrp->Function == MPI_FUNCTION_TARGET_ASSIST) { request_t *cmd_req = MPT_TAG_2_REQ(mpt, ccb->csio.tag_id); MPT_TGT_STATE(mpt, cmd_req)->state = TGT_STATE_IN_CAM; MPT_TGT_STATE(mpt, cmd_req)->ccb = NULL; MPT_TGT_STATE(mpt, cmd_req)->req = NULL; } mpt_prt(mpt, "mpt_execute_req_a64: I/O cancelled (status 0x%x)\n", ccb->ccb_h.status & CAM_STATUS_MASK); if (nseg && (ccb->ccb_h.flags & CAM_SG_LIST_PHYS) == 0) { bus_dmamap_unload(mpt->buffer_dmat, req->dmap); } ccb->ccb_h.status &= ~CAM_SIM_QUEUED; KASSERT(ccb->ccb_h.status, ("zero ccb sts at %d\n", __LINE__)); xpt_done(ccb); CAMLOCK_2_MPTLOCK(mpt); mpt_free_request(mpt, req); MPTLOCK_2_CAMLOCK(mpt); return; } ccb->ccb_h.status |= CAM_SIM_QUEUED; if (ccb->ccb_h.timeout != CAM_TIME_INFINITY) { ccb->ccb_h.timeout_ch = timeout(mpt_timeout, (caddr_t)ccb, (ccb->ccb_h.timeout * hz) / 1000); } else { callout_handle_init(&ccb->ccb_h.timeout_ch); } if (mpt->verbose >= MPT_PRT_DEBUG) { int nc = 0; mpt_print_request(req->req_vbuf); for (trq = req->chain; trq; trq = trq->chain) { printf(" Additional Chain Area %d\n", nc++); mpt_dump_sgl(trq->req_vbuf, 0); } } if (hdrp->Function == MPI_FUNCTION_TARGET_ASSIST) { request_t *cmd_req = MPT_TAG_2_REQ(mpt, ccb->csio.tag_id); mpt_tgt_state_t *tgt = MPT_TGT_STATE(mpt, cmd_req); #ifdef WE_TRUST_AUTO_GOOD_STATUS if ((ccb->ccb_h.flags & CAM_SEND_STATUS) && csio->scsi_status == SCSI_STATUS_OK && tgt->resid == 0) { tgt->state = TGT_STATE_MOVING_DATA_AND_STATUS; } else { tgt->state = TGT_STATE_MOVING_DATA; } #else tgt->state = TGT_STATE_MOVING_DATA; #endif } CAMLOCK_2_MPTLOCK(mpt); mpt_send_cmd(mpt, req); MPTLOCK_2_CAMLOCK(mpt); } static void mpt_execute_req(void *arg, bus_dma_segment_t *dm_segs, int nseg, int error) { request_t *req, *trq; char *mpt_off; union ccb *ccb; struct mpt_softc *mpt; int seg, first_lim; uint32_t flags, nxt_off; void *sglp; MSG_REQUEST_HEADER *hdrp; SGE_SIMPLE32 *se; SGE_CHAIN32 *ce; req = (request_t *)arg; ccb = req->ccb; mpt = ccb->ccb_h.ccb_mpt_ptr; req = ccb->ccb_h.ccb_req_ptr; hdrp = req->req_vbuf; mpt_off = req->req_vbuf; if (hdrp->Function == MPI_FUNCTION_SCSI_IO_REQUEST) { sglp = &((PTR_MSG_SCSI_IO_REQUEST)hdrp)->SGL; } else /* if (hdrp->Function == MPI_FUNCTION_TARGET_ASSIST) */ { sglp = &((PTR_MSG_TARGET_ASSIST_REQUEST)hdrp)->SGL; } if (error == 0 && ((uint32_t)nseg) >= mpt->max_seg_cnt) { error = EFBIG; mpt_prt(mpt, "segment count %d too large (max %u)\n", nseg, mpt->max_seg_cnt); } bad: if (error != 0) { if (hdrp->Function == MPI_FUNCTION_TARGET_ASSIST) { request_t *cmd_req = MPT_TAG_2_REQ(mpt, ccb->csio.tag_id); MPT_TGT_STATE(mpt, cmd_req)->state = TGT_STATE_IN_CAM; MPT_TGT_STATE(mpt, cmd_req)->ccb = NULL; MPT_TGT_STATE(mpt, cmd_req)->req = NULL; } if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INPROG) { cam_status status; mpt_freeze_ccb(ccb); if (error == EFBIG) { status = CAM_REQ_TOO_BIG; } else if (error == ENOMEM) { if (mpt->outofbeer == 0) { mpt->outofbeer = 1; xpt_freeze_simq(mpt->sim, 1); mpt_lprt(mpt, MPT_PRT_DEBUG, "FREEZEQ\n"); } status = CAM_REQUEUE_REQ; } else { status = CAM_REQ_CMP_ERR; } mpt_set_ccb_status(ccb, status); } ccb->ccb_h.status &= ~CAM_SIM_QUEUED; KASSERT(ccb->ccb_h.status, ("zero ccb sts at %d\n", __LINE__)); xpt_done(ccb); CAMLOCK_2_MPTLOCK(mpt); mpt_free_request(mpt, req); MPTLOCK_2_CAMLOCK(mpt); return; } /* * No data to transfer? * Just make a single simple SGL with zero length. */ if (mpt->verbose >= MPT_PRT_DEBUG) { int tidx = ((char *)sglp) - mpt_off; memset(&mpt_off[tidx], 0xff, MPT_REQUEST_AREA - tidx); } if (nseg == 0) { SGE_SIMPLE32 *se1 = (SGE_SIMPLE32 *) sglp; MPI_pSGE_SET_FLAGS(se1, (MPI_SGE_FLAGS_LAST_ELEMENT | MPI_SGE_FLAGS_END_OF_BUFFER | MPI_SGE_FLAGS_SIMPLE_ELEMENT | MPI_SGE_FLAGS_END_OF_LIST)); goto out; } flags = MPI_SGE_FLAGS_SIMPLE_ELEMENT; if (hdrp->Function == MPI_FUNCTION_SCSI_IO_REQUEST) { if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT) { flags |= MPI_SGE_FLAGS_HOST_TO_IOC; } } else { if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) { flags |= MPI_SGE_FLAGS_HOST_TO_IOC; } } if (!(ccb->ccb_h.flags & (CAM_SG_LIST_PHYS|CAM_DATA_PHYS))) { bus_dmasync_op_t op; if (hdrp->Function == MPI_FUNCTION_SCSI_IO_REQUEST) { if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) { op = BUS_DMASYNC_PREREAD; } else { op = BUS_DMASYNC_PREWRITE; } } else { if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) { op = BUS_DMASYNC_PREWRITE; } else { op = BUS_DMASYNC_PREREAD; } } bus_dmamap_sync(mpt->buffer_dmat, req->dmap, op); } /* * Okay, fill in what we can at the end of the command frame. * If we have up to MPT_NSGL_FIRST, we can fit them all into * the command frame. * * Otherwise, we fill up through MPT_NSGL_FIRST less one * SIMPLE32 pointers and start doing CHAIN32 entries after * that. */ if (nseg < MPT_NSGL_FIRST(mpt)) { first_lim = nseg; } else { /* * Leave room for CHAIN element */ first_lim = MPT_NSGL_FIRST(mpt) - 1; } se = (SGE_SIMPLE32 *) sglp; for (seg = 0; seg < first_lim; seg++, se++, dm_segs++) { uint32_t tf; memset(se, 0,sizeof (*se)); se->Address = dm_segs->ds_addr; MPI_pSGE_SET_LENGTH(se, dm_segs->ds_len); tf = flags; if (seg == first_lim - 1) { tf |= MPI_SGE_FLAGS_LAST_ELEMENT; } if (seg == nseg - 1) { tf |= MPI_SGE_FLAGS_END_OF_LIST | MPI_SGE_FLAGS_END_OF_BUFFER; } MPI_pSGE_SET_FLAGS(se, tf); } if (seg == nseg) { goto out; } /* * Tell the IOC where to find the first chain element. */ hdrp->ChainOffset = ((char *)se - (char *)hdrp) >> 2; nxt_off = MPT_RQSL(mpt); trq = req; /* * Make up the rest of the data segments out of a chain element * (contiained in the current request frame) which points to * SIMPLE32 elements in the next request frame, possibly ending * with *another* chain element (if there's more). */ while (seg < nseg) { int this_seg_lim; uint32_t tf, cur_off; bus_addr_t chain_list_addr; /* * Point to the chain descriptor. Note that the chain * descriptor is at the end of the *previous* list (whether * chain or simple). */ ce = (SGE_CHAIN32 *) se; /* * Before we change our current pointer, make sure we won't * overflow the request area with this frame. Note that we * test against 'greater than' here as it's okay in this case * to have next offset be just outside the request area. */ if ((nxt_off + MPT_RQSL(mpt)) > MPT_REQUEST_AREA) { nxt_off = MPT_REQUEST_AREA; goto next_chain; } /* * Set our SGE element pointer to the beginning of the chain * list and update our next chain list offset. */ se = (SGE_SIMPLE32 *) &mpt_off[nxt_off]; cur_off = nxt_off; nxt_off += MPT_RQSL(mpt); /* * Now initialized the chain descriptor. */ memset(ce, 0, sizeof (*ce)); /* * Get the physical address of the chain list. */ chain_list_addr = trq->req_pbuf; chain_list_addr += cur_off; ce->Address = chain_list_addr; ce->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT; /* * If we have more than a frame's worth of segments left, * set up the chain list to have the last element be another * chain descriptor. */ if ((nseg - seg) > MPT_NSGL(mpt)) { this_seg_lim = seg + MPT_NSGL(mpt) - 1; /* * The length of the chain is the length in bytes of the * number of segments plus the next chain element. * * The next chain descriptor offset is the length, * in words, of the number of segments. */ ce->Length = (this_seg_lim - seg) * sizeof (SGE_SIMPLE32); ce->NextChainOffset = ce->Length >> 2; ce->Length += sizeof (SGE_CHAIN32); } else { this_seg_lim = nseg; ce->Length = (this_seg_lim - seg) * sizeof (SGE_SIMPLE32); } /* * Fill in the chain list SGE elements with our segment data. * * If we're the last element in this chain list, set the last * element flag. If we're the completely last element period, * set the end of list and end of buffer flags. */ while (seg < this_seg_lim) { memset(se, 0, sizeof (*se)); se->Address = dm_segs->ds_addr; MPI_pSGE_SET_LENGTH(se, dm_segs->ds_len); tf = flags; if (seg == this_seg_lim - 1) { tf |= MPI_SGE_FLAGS_LAST_ELEMENT; } if (seg == nseg - 1) { tf |= MPI_SGE_FLAGS_END_OF_LIST | MPI_SGE_FLAGS_END_OF_BUFFER; } MPI_pSGE_SET_FLAGS(se, tf); se++; seg++; dm_segs++; } next_chain: /* * If we have more segments to do and we've used up all of * the space in a request area, go allocate another one * and chain to that. */ if (seg < nseg && nxt_off >= MPT_REQUEST_AREA) { request_t *nrq = mpt_get_request(mpt, FALSE); if (nrq == NULL) { error = ENOMEM; goto bad; } /* * Append the new request area on the tail of our list. */ if ((trq = req->chain) == NULL) { req->chain = nrq; } else { while (trq->chain != NULL) { trq = trq->chain; } trq->chain = nrq; } trq = nrq; mpt_off = trq->req_vbuf; if (mpt->verbose >= MPT_PRT_DEBUG) { memset(mpt_off, 0xff, MPT_REQUEST_AREA); } nxt_off = 0; } } out: /* * Last time we need to check if this CCB needs to be aborted. */ if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_INPROG) { if (hdrp->Function == MPI_FUNCTION_TARGET_ASSIST) { request_t *cmd_req = MPT_TAG_2_REQ(mpt, ccb->csio.tag_id); MPT_TGT_STATE(mpt, cmd_req)->state = TGT_STATE_IN_CAM; MPT_TGT_STATE(mpt, cmd_req)->ccb = NULL; MPT_TGT_STATE(mpt, cmd_req)->req = NULL; } mpt_prt(mpt, "mpt_execute_req: I/O cancelled (status 0x%x)\n", ccb->ccb_h.status & CAM_STATUS_MASK); if (nseg && (ccb->ccb_h.flags & CAM_SG_LIST_PHYS) == 0) { bus_dmamap_unload(mpt->buffer_dmat, req->dmap); } ccb->ccb_h.status &= ~CAM_SIM_QUEUED; KASSERT(ccb->ccb_h.status, ("zero ccb sts at %d\n", __LINE__)); xpt_done(ccb); CAMLOCK_2_MPTLOCK(mpt); mpt_free_request(mpt, req); MPTLOCK_2_CAMLOCK(mpt); return; } ccb->ccb_h.status |= CAM_SIM_QUEUED; if (ccb->ccb_h.timeout != CAM_TIME_INFINITY) { ccb->ccb_h.timeout_ch = timeout(mpt_timeout, (caddr_t)ccb, (ccb->ccb_h.timeout * hz) / 1000); } else { callout_handle_init(&ccb->ccb_h.timeout_ch); } if (mpt->verbose >= MPT_PRT_DEBUG) { int nc = 0; mpt_print_request(req->req_vbuf); for (trq = req->chain; trq; trq = trq->chain) { printf(" Additional Chain Area %d\n", nc++); mpt_dump_sgl(trq->req_vbuf, 0); } } if (hdrp->Function == MPI_FUNCTION_TARGET_ASSIST) { request_t *cmd_req = MPT_TAG_2_REQ(mpt, ccb->csio.tag_id); mpt_tgt_state_t *tgt = MPT_TGT_STATE(mpt, cmd_req); #ifdef WE_TRUST_AUTO_GOOD_STATUS if ((ccb->ccb_h.flags & CAM_SEND_STATUS) && csio->scsi_status == SCSI_STATUS_OK && tgt->resid == 0) { tgt->state = TGT_STATE_MOVING_DATA_AND_STATUS; } else { tgt->state = TGT_STATE_MOVING_DATA; } #else tgt->state = TGT_STATE_MOVING_DATA; #endif } CAMLOCK_2_MPTLOCK(mpt); mpt_send_cmd(mpt, req); MPTLOCK_2_CAMLOCK(mpt); } static void mpt_start(struct cam_sim *sim, union ccb *ccb) { request_t *req; struct mpt_softc *mpt; MSG_SCSI_IO_REQUEST *mpt_req; struct ccb_scsiio *csio = &ccb->csio; struct ccb_hdr *ccbh = &ccb->ccb_h; bus_dmamap_callback_t *cb; int raid_passthru; /* Get the pointer for the physical addapter */ mpt = ccb->ccb_h.ccb_mpt_ptr; raid_passthru = (sim == mpt->phydisk_sim); CAMLOCK_2_MPTLOCK(mpt); if ((req = mpt_get_request(mpt, FALSE)) == NULL) { if (mpt->outofbeer == 0) { mpt->outofbeer = 1; xpt_freeze_simq(mpt->sim, 1); mpt_lprt(mpt, MPT_PRT_DEBUG, "FREEZEQ\n"); } ccb->ccb_h.status &= ~CAM_SIM_QUEUED; mpt_set_ccb_status(ccb, CAM_REQUEUE_REQ); MPTLOCK_2_CAMLOCK(mpt); xpt_done(ccb); return; } MPTLOCK_2_CAMLOCK(mpt); if (sizeof (bus_addr_t) > 4) { cb = mpt_execute_req_a64; } else { cb = mpt_execute_req; } #if 0 COWWWWW if (raid_passthru) { status = mpt_raid_quiesce_disk(mpt, mpt->raid_disks + ccb->ccb_h.target_id, request_t *req) } #endif /* * Link the ccb and the request structure so we can find * the other knowing either the request or the ccb */ req->ccb = ccb; ccb->ccb_h.ccb_req_ptr = req; /* Now we build the command for the IOC */ mpt_req = req->req_vbuf; memset(mpt_req, 0, sizeof (MSG_SCSI_IO_REQUEST)); mpt_req->Function = MPI_FUNCTION_SCSI_IO_REQUEST; if (raid_passthru) { mpt_req->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH; } mpt_req->Bus = 0; /* we don't have multiport devices yet */ mpt_req->SenseBufferLength = (csio->sense_len < MPT_SENSE_SIZE) ? csio->sense_len : MPT_SENSE_SIZE; /* * We use the message context to find the request structure when we * Get the command completion interrupt from the IOC. */ mpt_req->MsgContext = htole32(req->index | scsi_io_handler_id); /* Which physical device to do the I/O on */ mpt_req->TargetID = ccb->ccb_h.target_id; /* We assume a single level LUN type */ if (ccb->ccb_h.target_lun >= 256) { mpt_req->LUN[0] = 0x40 | ((ccb->ccb_h.target_lun >> 8) & 0x3f); mpt_req->LUN[1] = ccb->ccb_h.target_lun & 0xff; } else { mpt_req->LUN[1] = ccb->ccb_h.target_lun; } /* Set the direction of the transfer */ if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) { mpt_req->Control = MPI_SCSIIO_CONTROL_READ; } else if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT) { mpt_req->Control = MPI_SCSIIO_CONTROL_WRITE; } else { mpt_req->Control = MPI_SCSIIO_CONTROL_NODATATRANSFER; } if ((ccb->ccb_h.flags & CAM_TAG_ACTION_VALID) != 0) { switch(ccb->csio.tag_action) { case MSG_HEAD_OF_Q_TAG: mpt_req->Control |= MPI_SCSIIO_CONTROL_HEADOFQ; break; case MSG_ACA_TASK: mpt_req->Control |= MPI_SCSIIO_CONTROL_ACAQ; break; case MSG_ORDERED_Q_TAG: mpt_req->Control |= MPI_SCSIIO_CONTROL_ORDEREDQ; break; case MSG_SIMPLE_Q_TAG: default: mpt_req->Control |= MPI_SCSIIO_CONTROL_SIMPLEQ; break; } } else { if (mpt->is_fc || mpt->is_sas) { mpt_req->Control |= MPI_SCSIIO_CONTROL_SIMPLEQ; } else { /* XXX No such thing for a target doing packetized. */ mpt_req->Control |= MPI_SCSIIO_CONTROL_UNTAGGED; } } if (mpt->is_fc == 0 && mpt->is_sas == 0) { if (ccb->ccb_h.flags & CAM_DIS_DISCONNECT) { mpt_req->Control |= MPI_SCSIIO_CONTROL_NO_DISCONNECT; } } /* Copy the scsi command block into place */ if ((ccb->ccb_h.flags & CAM_CDB_POINTER) != 0) { bcopy(csio->cdb_io.cdb_ptr, mpt_req->CDB, csio->cdb_len); } else { bcopy(csio->cdb_io.cdb_bytes, mpt_req->CDB, csio->cdb_len); } mpt_req->CDBLength = csio->cdb_len; mpt_req->DataLength = csio->dxfer_len; mpt_req->SenseBufferLowAddr = req->sense_pbuf; /* * If we have any data to send with this command map it into bus space. */ if ((ccbh->flags & CAM_DIR_MASK) != CAM_DIR_NONE) { if ((ccbh->flags & CAM_SCATTER_VALID) == 0) { /* * We've been given a pointer to a single buffer. */ if ((ccbh->flags & CAM_DATA_PHYS) == 0) { /* * Virtual address that needs to translated into * one or more physical address ranges. */ int error; int s = splsoftvm(); error = bus_dmamap_load(mpt->buffer_dmat, req->dmap, csio->data_ptr, csio->dxfer_len, cb, req, 0); splx(s); if (error == EINPROGRESS) { /* * So as to maintain ordering, * freeze the controller queue * until our mapping is * returned. */ xpt_freeze_simq(mpt->sim, 1); ccbh->status |= CAM_RELEASE_SIMQ; } } else { /* * We have been given a pointer to single * physical buffer. */ struct bus_dma_segment seg; seg.ds_addr = (bus_addr_t)(vm_offset_t)csio->data_ptr; seg.ds_len = csio->dxfer_len; (*cb)(req, &seg, 1, 0); } } else { /* * We have been given a list of addresses. * This case could be easily supported but they are not * currently generated by the CAM subsystem so there * is no point in wasting the time right now. */ struct bus_dma_segment *segs; if ((ccbh->flags & CAM_SG_LIST_PHYS) == 0) { (*cb)(req, NULL, 0, EFAULT); } else { /* Just use the segments provided */ segs = (struct bus_dma_segment *)csio->data_ptr; (*cb)(req, segs, csio->sglist_cnt, 0); } } } else { (*cb)(req, NULL, 0, 0); } } static int mpt_bus_reset(struct mpt_softc *mpt, int sleep_ok) { int error; u_int status; error = mpt_scsi_send_tmf(mpt, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS, mpt->is_fc ? MPI_SCSITASKMGMT_MSGFLAGS_LIP_RESET_OPTION : 0, 0, 0, 0, 0, sleep_ok); if (error != 0) { /* * mpt_scsi_send_tmf hard resets on failure, so no * need to do so here. */ mpt_prt(mpt, "mpt_bus_reset: mpt_scsi_send_tmf returned %d\n", error); return (EIO); } /* Wait for bus reset to be processed by the IOC. */ error = mpt_wait_req(mpt, mpt->tmf_req, REQ_STATE_DONE, REQ_STATE_DONE, sleep_ok, 5000); status = mpt->tmf_req->IOCStatus; mpt->tmf_req->state = REQ_STATE_FREE; if (error) { mpt_prt(mpt, "mpt_bus_reset: Reset timed-out." "Resetting controller.\n"); mpt_reset(mpt, /*reinit*/TRUE); return (ETIMEDOUT); } else if ((status & MPI_IOCSTATUS_MASK) != MPI_SCSI_STATUS_SUCCESS) { mpt_prt(mpt, "mpt_bus_reset: TMF Status %d." "Resetting controller.\n", status); mpt_reset(mpt, /*reinit*/TRUE); return (EIO); } return (0); } static int mpt_fc_reset_link(struct mpt_softc *mpt, int dowait) { int r = 0; request_t *req; PTR_MSG_FC_PRIMITIVE_SEND_REQUEST fc; req = mpt_get_request(mpt, FALSE); if (req == NULL) { return (ENOMEM); } fc = req->req_vbuf; memset(fc, 0, sizeof(*fc)); fc->SendFlags = MPI_FC_PRIM_SEND_FLAGS_RESET_LINK; fc->Function = MPI_FUNCTION_FC_PRIMITIVE_SEND; fc->MsgContext = htole32(req->index | fc_els_handler_id); mpt_send_cmd(mpt, req); if (dowait) { r = mpt_wait_req(mpt, req, REQ_STATE_DONE, REQ_STATE_DONE, FALSE, 60 * 1000); if (r == 0) { mpt_free_request(mpt, req); } } return (r); } static int mpt_cam_event(struct mpt_softc *mpt, request_t *req, MSG_EVENT_NOTIFY_REPLY *msg) { switch(msg->Event & 0xFF) { case MPI_EVENT_UNIT_ATTENTION: mpt_prt(mpt, "Bus: 0x%02x TargetID: 0x%02x\n", (msg->Data[0] >> 8) & 0xff, msg->Data[0] & 0xff); break; case MPI_EVENT_IOC_BUS_RESET: /* We generated a bus reset */ mpt_prt(mpt, "IOC Bus Reset Port: %d\n", (msg->Data[0] >> 8) & 0xff); xpt_async(AC_BUS_RESET, mpt->path, NULL); break; case MPI_EVENT_EXT_BUS_RESET: /* Someone else generated a bus reset */ mpt_prt(mpt, "External Bus Reset Detected\n"); /* * These replies don't return EventData like the MPI * spec says they do */ xpt_async(AC_BUS_RESET, mpt->path, NULL); break; case MPI_EVENT_RESCAN: /* * In general this means a device has been added * to the loop. */ mpt_prt(mpt, "Rescan Port: %d\n", (msg->Data[0] >> 8) & 0xff); /* xpt_async(AC_FOUND_DEVICE, path, NULL); */ break; case MPI_EVENT_LINK_STATUS_CHANGE: mpt_prt(mpt, "Port %d: LinkState: %s\n", (msg->Data[1] >> 8) & 0xff, ((msg->Data[0] & 0xff) == 0)? "Failed" : "Active"); break; case MPI_EVENT_LOOP_STATE_CHANGE: switch ((msg->Data[0] >> 16) & 0xff) { case 0x01: mpt_prt(mpt, "Port 0x%x: FC LinkEvent: LIP(%02x,%02x) " "(Loop Initialization)\n", (msg->Data[1] >> 8) & 0xff, (msg->Data[0] >> 8) & 0xff, (msg->Data[0] ) & 0xff); switch ((msg->Data[0] >> 8) & 0xff) { case 0xF7: if ((msg->Data[0] & 0xff) == 0xF7) { mpt_prt(mpt, "Device needs AL_PA\n"); } else { mpt_prt(mpt, "Device %02x doesn't like " "FC performance\n", msg->Data[0] & 0xFF); } break; case 0xF8: if ((msg->Data[0] & 0xff) == 0xF7) { mpt_prt(mpt, "Device had loop failure " "at its receiver prior to acquiring" " AL_PA\n"); } else { mpt_prt(mpt, "Device %02x detected loop" " failure at its receiver\n", msg->Data[0] & 0xFF); } break; default: mpt_prt(mpt, "Device %02x requests that device " "%02x reset itself\n", msg->Data[0] & 0xFF, (msg->Data[0] >> 8) & 0xFF); break; } break; case 0x02: mpt_prt(mpt, "Port 0x%x: FC LinkEvent: " "LPE(%02x,%02x) (Loop Port Enable)\n", (msg->Data[1] >> 8) & 0xff, /* Port */ (msg->Data[0] >> 8) & 0xff, /* Character 3 */ (msg->Data[0] ) & 0xff /* Character 4 */); break; case 0x03: mpt_prt(mpt, "Port 0x%x: FC LinkEvent: " "LPB(%02x,%02x) (Loop Port Bypass)\n", (msg->Data[1] >> 8) & 0xff, /* Port */ (msg->Data[0] >> 8) & 0xff, /* Character 3 */ (msg->Data[0] ) & 0xff /* Character 4 */); break; default: mpt_prt(mpt, "Port 0x%x: FC LinkEvent: Unknown " "FC event (%02x %02x %02x)\n", (msg->Data[1] >> 8) & 0xff, /* Port */ (msg->Data[0] >> 16) & 0xff, /* Event */ (msg->Data[0] >> 8) & 0xff, /* Character 3 */ (msg->Data[0] ) & 0xff /* Character 4 */); } break; case MPI_EVENT_LOGOUT: mpt_prt(mpt, "FC Logout Port: %d N_PortID: %02x\n", (msg->Data[1] >> 8) & 0xff, msg->Data[0]); break; case MPI_EVENT_EVENT_CHANGE: mpt_lprt(mpt, MPT_PRT_DEBUG, "mpt_cam_event: MPI_EVENT_EVENT_CHANGE\n"); break; case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE: /* * Devices are attachin'..... */ mpt_prt(mpt, "mpt_cam_event: MPI_EVENT_SAS_DEVICE_STATUS_CHANGE\n"); break; default: mpt_lprt(mpt, MPT_PRT_WARN, "mpt_cam_event: 0x%x\n", msg->Event & 0xFF); return (0); } return (1); } /* * Reply path for all SCSI I/O requests, called from our * interrupt handler by extracting our handler index from * the MsgContext field of the reply from the IOC. * * This routine is optimized for the common case of a * completion without error. All exception handling is * offloaded to non-inlined helper routines to minimize * cache footprint. */ static int mpt_scsi_reply_handler(struct mpt_softc *mpt, request_t *req, uint32_t reply_desc, MSG_DEFAULT_REPLY *reply_frame) { MSG_SCSI_IO_REQUEST *scsi_req; union ccb *ccb; if (req->state == REQ_STATE_FREE) { mpt_prt(mpt, "mpt_scsi_reply_handler: req already free\n"); return (TRUE); } scsi_req = (MSG_SCSI_IO_REQUEST *)req->req_vbuf; ccb = req->ccb; if (ccb == NULL) { mpt_prt(mpt, "req %p:%u without CCB (state %#x " "func %#x index %u rf %p)\n", req, req->serno, req->state, scsi_req->Function, req->index, reply_frame); mpt_print_scsi_io_request(scsi_req); return (TRUE); } untimeout(mpt_timeout, ccb, ccb->ccb_h.timeout_ch); if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) { bus_dmasync_op_t op; if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) op = BUS_DMASYNC_POSTREAD; else op = BUS_DMASYNC_POSTWRITE; bus_dmamap_sync(mpt->buffer_dmat, req->dmap, op); bus_dmamap_unload(mpt->buffer_dmat, req->dmap); } if (reply_frame == NULL) { /* * Context only reply, completion without error status. */ ccb->csio.resid = 0; mpt_set_ccb_status(ccb, CAM_REQ_CMP); ccb->csio.scsi_status = SCSI_STATUS_OK; } else { mpt_scsi_reply_frame_handler(mpt, req, reply_frame); } if (mpt->outofbeer) { ccb->ccb_h.status |= CAM_RELEASE_SIMQ; mpt->outofbeer = 0; mpt_lprt(mpt, MPT_PRT_DEBUG, "THAWQ\n"); } if (scsi_req->Function == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH && scsi_req->CDB[0] == INQUIRY && (scsi_req->CDB[1] & SI_EVPD) == 0) { struct scsi_inquiry_data *inq; /* * Fake out the device type so that only the * pass-thru device will attach. */ inq = (struct scsi_inquiry_data *)ccb->csio.data_ptr; inq->device &= ~0x1F; inq->device |= T_NODEVICE; } ccb->ccb_h.status &= ~CAM_SIM_QUEUED; KASSERT(ccb->ccb_h.status, ("zero ccb sts at %d\n", __LINE__)); MPTLOCK_2_CAMLOCK(mpt); xpt_done(ccb); CAMLOCK_2_MPTLOCK(mpt); if ((req->state & REQ_STATE_TIMEDOUT) == 0) { TAILQ_REMOVE(&mpt->request_pending_list, req, links); } else { TAILQ_REMOVE(&mpt->request_timeout_list, req, links); } if ((req->state & REQ_STATE_NEED_WAKEUP) == 0) { mpt_free_request(mpt, req); return (/*free_reply*/TRUE); } req->state &= ~REQ_STATE_QUEUED; req->state |= REQ_STATE_DONE; wakeup(req); return (/*free_reply*/TRUE); } static int mpt_scsi_tmf_reply_handler(struct mpt_softc *mpt, request_t *req, uint32_t reply_desc, MSG_DEFAULT_REPLY *reply_frame) { MSG_SCSI_TASK_MGMT_REPLY *tmf_reply; uint16_t status; KASSERT(req == mpt->tmf_req, ("TMF Reply not using mpt->tmf_req")); tmf_reply = (MSG_SCSI_TASK_MGMT_REPLY *)reply_frame; /* Record status of TMF for any waiters. */ req->IOCStatus = tmf_reply->IOCStatus; status = le16toh(tmf_reply->IOCStatus); mpt_lprt(mpt, MPT_PRT_INFO, "TMF complete: req %p:%u status 0x%x\n", req, req->serno, status); TAILQ_REMOVE(&mpt->request_pending_list, req, links); if ((req->state & REQ_STATE_NEED_WAKEUP) != 0) { req->state |= REQ_STATE_DONE; wakeup(req); } else { mpt->tmf_req->state = REQ_STATE_FREE; } return (TRUE); } /* * XXX: Move to definitions file */ #define ELS 0x22 #define FC4LS 0x32 #define ABTS 0x81 #define BA_ACC 0x84 #define LS_RJT 0x01 #define LS_ACC 0x02 #define PLOGI 0x03 #define LOGO 0x05 #define SRR 0x14 #define PRLI 0x20 #define PRLO 0x21 #define ADISC 0x52 #define RSCN 0x61 static void mpt_fc_els_send_response(struct mpt_softc *mpt, request_t *req, PTR_MSG_LINK_SERVICE_BUFFER_POST_REPLY rp, U8 length) { MSG_LINK_SERVICE_RSP_REQUEST tmp; PTR_MSG_LINK_SERVICE_RSP_REQUEST rsp; /* * We are going to reuse the ELS request to send this response back. */ rsp = &tmp; memset(rsp, 0, sizeof(*rsp)); #ifdef USE_IMMEDIATE_LINK_DATA /* * Apparently the IMMEDIATE stuff doesn't seem to work. */ rsp->RspFlags = LINK_SERVICE_RSP_FLAGS_IMMEDIATE; #endif rsp->RspLength = length; rsp->Function = MPI_FUNCTION_FC_LINK_SRVC_RSP; rsp->MsgContext = htole32(req->index | fc_els_handler_id); /* * Copy over information from the original reply frame to * it's correct place in the response. */ memcpy((U8 *)rsp + 0x0c, (U8 *)rp + 0x1c, 24); /* * And now copy back the temporary area to the original frame. */ memcpy(req->req_vbuf, rsp, sizeof (MSG_LINK_SERVICE_RSP_REQUEST)); rsp = req->req_vbuf; #ifdef USE_IMMEDIATE_LINK_DATA memcpy((U8 *)&rsp->SGL, &((U8 *)req->req_vbuf)[MPT_RQSL(mpt)], length); #else { PTR_SGE_SIMPLE32 se = (PTR_SGE_SIMPLE32) &rsp->SGL; bus_addr_t paddr = req->req_pbuf; paddr += MPT_RQSL(mpt); se->FlagsLength = MPI_SGE_FLAGS_HOST_TO_IOC | MPI_SGE_FLAGS_SIMPLE_ELEMENT | MPI_SGE_FLAGS_LAST_ELEMENT | MPI_SGE_FLAGS_END_OF_LIST | MPI_SGE_FLAGS_END_OF_BUFFER; se->FlagsLength <<= MPI_SGE_FLAGS_SHIFT; se->FlagsLength |= (length); se->Address = (uint32_t) paddr; } #endif /* * Send it on... */ mpt_send_cmd(mpt, req); } static int mpt_fc_els_reply_handler(struct mpt_softc *mpt, request_t *req, uint32_t reply_desc, MSG_DEFAULT_REPLY *reply_frame) { PTR_MSG_LINK_SERVICE_BUFFER_POST_REPLY rp = (PTR_MSG_LINK_SERVICE_BUFFER_POST_REPLY) reply_frame; U8 rctl; U8 type; U8 cmd; U16 status = le16toh(reply_frame->IOCStatus); U32 *elsbuf; int do_refresh = TRUE; mpt_lprt(mpt, MPT_PRT_DEBUG, "FC_ELS Complete: req %p:%u, reply %p\n", req, req->serno, reply_frame); if (status != MPI_IOCSTATUS_SUCCESS) { mpt_prt(mpt, "ELS REPLY STATUS 0x%x for Function %x\n", status, reply_frame->Function); if (status == MPI_IOCSTATUS_INVALID_STATE) { /* * XXX: to get around shutdown issue */ mpt->disabled = 1; return (TRUE); } return (TRUE); } /* * If the function of a link service response, we recycle the * response to be a refresh for a new link service request. */ if (rp->Function == MPI_FUNCTION_FC_LINK_SRVC_RSP) { mpt_fc_add_els(mpt, req); return (TRUE); } if (rp->Function == MPI_FUNCTION_FC_PRIMITIVE_SEND) { req->state &= ~REQ_STATE_QUEUED; req->state |= REQ_STATE_DONE; if ((req->state & REQ_STATE_NEED_WAKEUP) == 0) { mpt_lprt(mpt, MPT_PRT_DEBUG, "Async Primitive Send Complete\n"); mpt_free_request(mpt, req); } else { mpt_lprt(mpt, MPT_PRT_DEBUG, "Sync Primitive Send Complete\n"); wakeup(req); } return (TRUE); } if (rp->Function != MPI_FUNCTION_FC_LINK_SRVC_BUF_POST) { mpt_prt(mpt, "unexpected ELS_REPLY: Function 0x%x Flags %x " "Length %d Message Flags %x\n", rp->Function, rp->Flags, rp->MsgLength, rp->MsgFlags); return (TRUE); } if (rp->MsgLength <= 5) { /* * This is just a ack of an original ELS buffer post */ mpt_lprt(mpt, MPT_PRT_DEBUG, "Recv'd ACK of FC_ELS buf post %p:%u\n", req, req->serno); return (TRUE); } rctl = (le32toh(rp->Rctl_Did) & MPI_FC_RCTL_MASK) >> MPI_FC_RCTL_SHIFT; type = (le32toh(rp->Type_Fctl) & MPI_FC_TYPE_MASK) >> MPI_FC_TYPE_SHIFT; elsbuf = &((U32 *)req->req_vbuf)[MPT_RQSL(mpt)/sizeof (U32)]; cmd = be32toh(elsbuf[0]) >> 24; if (rp->Flags & MPI_LS_BUF_POST_REPLY_FLAG_NO_RSP_NEEDED) { mpt_lprt(mpt, MPT_PRT_ALWAYS, "ELS_REPLY: response unneeded\n"); return (TRUE); } if (rctl == ELS && type == 1) { switch (cmd) { case PRLI: /* * Send back a PRLI ACC */ mpt_prt(mpt, "PRLI from 0x%08x%08x\n", le32toh(rp->Wwn.PortNameHigh), le32toh(rp->Wwn.PortNameLow)); elsbuf[0] = htobe32(0x02100014); elsbuf[1] |= htobe32(0x00000100); elsbuf[4] = htobe32(0x00000002); if (mpt->role & MPT_ROLE_TARGET) elsbuf[4] |= htobe32(0x00000010); if (mpt->role & MPT_ROLE_INITIATOR) elsbuf[4] |= htobe32(0x00000020); mpt_fc_els_send_response(mpt, req, rp, 20); do_refresh = FALSE; break; case PRLO: memset(elsbuf, 0, 5 * (sizeof (U32))); elsbuf[0] = htobe32(0x02100014); elsbuf[1] = htobe32(0x08000100); mpt_prt(mpt, "PRLO from 0x%08x%08x\n", le32toh(rp->Wwn.PortNameHigh), le32toh(rp->Wwn.PortNameLow)); mpt_fc_els_send_response(mpt, req, rp, 20); do_refresh = FALSE; break; default: mpt_prt(mpt, "ELS TYPE 1 COMMAND: %x\n", cmd); break; } } else if (rctl == ABTS && type == 0) { uint16_t rx_id = le16toh(rp->Rxid); uint16_t ox_id = le16toh(rp->Oxid); request_t *tgt_req = NULL; mpt_prt(mpt, "ELS: ABTS OX_ID 0x%x RX_ID 0x%x from 0x%08x%08x\n", ox_id, rx_id, le32toh(rp->Wwn.PortNameHigh), le32toh(rp->Wwn.PortNameLow)); if (rx_id >= mpt->mpt_max_tgtcmds) { mpt_prt(mpt, "Bad RX_ID 0x%x\n", rx_id); } else if (mpt->tgt_cmd_ptrs == NULL) { mpt_prt(mpt, "No TGT CMD PTRS\n"); } else { tgt_req = mpt->tgt_cmd_ptrs[rx_id]; } if (tgt_req) { mpt_tgt_state_t *tgt = MPT_TGT_STATE(mpt, tgt_req); uint8_t *vbuf; union ccb *ccb = tgt->ccb; uint32_t ct_id; vbuf = tgt_req->req_vbuf; vbuf += MPT_RQSL(mpt); /* * Check to make sure we have the correct command * The reply descriptor in the target state should * should contain an IoIndex that should match the * RX_ID. * * It'd be nice to have OX_ID to crosscheck with * as well. */ ct_id = GET_IO_INDEX(tgt->reply_desc); if (ct_id != rx_id) { mpt_lprt(mpt, MPT_PRT_ERROR, "ABORT Mismatch: " "RX_ID received=0x%x; RX_ID in cmd=0x%x\n", rx_id, ct_id); goto skip; } ccb = tgt->ccb; if (ccb) { mpt_prt(mpt, "CCB (%p): lun %u flags %x status %x\n", ccb, ccb->ccb_h.target_lun, ccb->ccb_h.flags, ccb->ccb_h.status); } mpt_prt(mpt, "target state 0x%x resid %u xfrd %u rpwrd " "%x nxfers %x\n", tgt->state, tgt->resid, tgt->bytes_xfered, tgt->reply_desc, tgt->nxfers); skip: if (mpt_abort_target_cmd(mpt, tgt_req)) { mpt_prt(mpt, "unable to start TargetAbort\n"); } } else { mpt_prt(mpt, "no back pointer for RX_ID 0x%x\n", rx_id); } memset(elsbuf, 0, 5 * (sizeof (U32))); elsbuf[0] = htobe32(0); elsbuf[1] = htobe32((ox_id << 16) | rx_id); elsbuf[2] = htobe32(0x000ffff); /* * Dork with the reply frame so that the reponse to it * will be correct. */ rp->Rctl_Did += ((BA_ACC - ABTS) << MPI_FC_RCTL_SHIFT); mpt_fc_els_send_response(mpt, req, rp, 12); do_refresh = FALSE; } else { mpt_prt(mpt, "ELS: RCTL %x TYPE %x CMD %x\n", rctl, type, cmd); } if (do_refresh == TRUE) { mpt_fc_add_els(mpt, req); } return (TRUE); } /* * Clean up all SCSI Initiator personality state in response * to a controller reset. */ static void mpt_cam_ioc_reset(struct mpt_softc *mpt, int type) { /* * The pending list is already run down by * the generic handler. Perform the same * operation on the timed out request list. */ mpt_complete_request_chain(mpt, &mpt->request_timeout_list, MPI_IOCSTATUS_INVALID_STATE); /* * Inform the XPT that a bus reset has occurred. */ xpt_async(AC_BUS_RESET, mpt->path, NULL); } /* * Parse additional completion information in the reply * frame for SCSI I/O requests. */ static int mpt_scsi_reply_frame_handler(struct mpt_softc *mpt, request_t *req, MSG_DEFAULT_REPLY *reply_frame) { union ccb *ccb; MSG_SCSI_IO_REPLY *scsi_io_reply; u_int ioc_status; u_int sstate; u_int loginfo; MPT_DUMP_REPLY_FRAME(mpt, reply_frame); KASSERT(reply_frame->Function == MPI_FUNCTION_SCSI_IO_REQUEST || reply_frame->Function == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH, ("MPT SCSI I/O Handler called with incorrect reply type")); KASSERT((reply_frame->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY) == 0, ("MPT SCSI I/O Handler called with continuation reply")); scsi_io_reply = (MSG_SCSI_IO_REPLY *)reply_frame; ioc_status = le16toh(scsi_io_reply->IOCStatus); loginfo = ioc_status & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE; ioc_status &= MPI_IOCSTATUS_MASK; sstate = scsi_io_reply->SCSIState; ccb = req->ccb; ccb->csio.resid = ccb->csio.dxfer_len - le32toh(scsi_io_reply->TransferCount); if ((sstate & MPI_SCSI_STATE_AUTOSENSE_VALID) != 0 && (ccb->ccb_h.flags & (CAM_SENSE_PHYS | CAM_SENSE_PTR)) == 0) { ccb->ccb_h.status |= CAM_AUTOSNS_VALID; ccb->csio.sense_resid = ccb->csio.sense_len - scsi_io_reply->SenseCount; bcopy(req->sense_vbuf, &ccb->csio.sense_data, min(ccb->csio.sense_len, scsi_io_reply->SenseCount)); } if ((sstate & MPI_SCSI_STATE_QUEUE_TAG_REJECTED) != 0) { /* * Tag messages rejected, but non-tagged retry * was successful. XXXX mpt_set_tags(mpt, devinfo, MPT_QUEUE_NONE); */ } switch(ioc_status) { case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* * XXX * Linux driver indicates that a zero * transfer length with this error code * indicates a CRC error. * * No need to swap the bytes for checking * against zero. */ if (scsi_io_reply->TransferCount == 0) { mpt_set_ccb_status(ccb, CAM_UNCOR_PARITY); break; } /* FALLTHROUGH */ case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: case MPI_IOCSTATUS_SUCCESS: case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: if ((sstate & MPI_SCSI_STATE_NO_SCSI_STATUS) != 0) { /* * Status was never returned for this transaction. */ mpt_set_ccb_status(ccb, CAM_UNEXP_BUSFREE); } else if (scsi_io_reply->SCSIStatus != SCSI_STATUS_OK) { ccb->csio.scsi_status = scsi_io_reply->SCSIStatus; mpt_set_ccb_status(ccb, CAM_SCSI_STATUS_ERROR); if ((sstate & MPI_SCSI_STATE_AUTOSENSE_FAILED) != 0) mpt_set_ccb_status(ccb, CAM_AUTOSENSE_FAIL); } else if ((sstate & MPI_SCSI_STATE_RESPONSE_INFO_VALID) != 0) { /* XXX Handle SPI-Packet and FCP-2 reponse info. */ mpt_set_ccb_status(ccb, CAM_REQ_CMP_ERR); } else mpt_set_ccb_status(ccb, CAM_REQ_CMP); break; case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: mpt_set_ccb_status(ccb, CAM_DATA_RUN_ERR); break; case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: mpt_set_ccb_status(ccb, CAM_UNCOR_PARITY); break; case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* * Since selection timeouts and "device really not * there" are grouped into this error code, report * selection timeout. Selection timeouts are * typically retried before giving up on the device * whereas "device not there" errors are considered * unretryable. */ mpt_set_ccb_status(ccb, CAM_SEL_TIMEOUT); break; case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: mpt_set_ccb_status(ccb, CAM_SEQUENCE_FAIL); break; case MPI_IOCSTATUS_SCSI_INVALID_BUS: mpt_set_ccb_status(ccb, CAM_PATH_INVALID); break; case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: mpt_set_ccb_status(ccb, CAM_TID_INVALID); break; case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: ccb->ccb_h.status = CAM_UA_TERMIO; break; case MPI_IOCSTATUS_INVALID_STATE: /* * The IOC has been reset. Emulate a bus reset. */ /* FALLTHROUGH */ case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: ccb->ccb_h.status = CAM_SCSI_BUS_RESET; break; case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* * Don't clobber any timeout status that has * already been set for this transaction. We * want the SCSI layer to be able to differentiate * between the command we aborted due to timeout * and any innocent bystanders. */ if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_INPROG) break; mpt_set_ccb_status(ccb, CAM_REQ_TERMIO); break; case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: mpt_set_ccb_status(ccb, CAM_RESRC_UNAVAIL); break; case MPI_IOCSTATUS_BUSY: mpt_set_ccb_status(ccb, CAM_BUSY); break; case MPI_IOCSTATUS_INVALID_FUNCTION: case MPI_IOCSTATUS_INVALID_SGL: case MPI_IOCSTATUS_INTERNAL_ERROR: case MPI_IOCSTATUS_INVALID_FIELD: default: /* XXX * Some of the above may need to kick * of a recovery action!!!! */ ccb->ccb_h.status = CAM_UNREC_HBA_ERROR; break; } if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { mpt_freeze_ccb(ccb); } return (TRUE); } static void mpt_action(struct cam_sim *sim, union ccb *ccb) { struct mpt_softc *mpt; struct ccb_trans_settings *cts; u_int tgt; int raid_passthru; CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("mpt_action\n")); mpt = (struct mpt_softc *)cam_sim_softc(sim); raid_passthru = (sim == mpt->phydisk_sim); tgt = ccb->ccb_h.target_id; if (raid_passthru && ccb->ccb_h.func_code != XPT_PATH_INQ && ccb->ccb_h.func_code != XPT_RESET_BUS) { CAMLOCK_2_MPTLOCK(mpt); if (mpt_map_physdisk(mpt, ccb, &tgt) != 0) { ccb->ccb_h.status &= ~CAM_SIM_QUEUED; mpt_set_ccb_status(ccb, CAM_DEV_NOT_THERE); MPTLOCK_2_CAMLOCK(mpt); xpt_done(ccb); return; } MPTLOCK_2_CAMLOCK(mpt); } ccb->ccb_h.ccb_mpt_ptr = mpt; switch (ccb->ccb_h.func_code) { case XPT_SCSI_IO: /* Execute the requested I/O operation */ /* * Do a couple of preliminary checks... */ if ((ccb->ccb_h.flags & CAM_CDB_POINTER) != 0) { if ((ccb->ccb_h.flags & CAM_CDB_PHYS) != 0) { ccb->ccb_h.status &= ~CAM_SIM_QUEUED; mpt_set_ccb_status(ccb, CAM_REQ_INVALID); xpt_done(ccb); break; } } /* Max supported CDB length is 16 bytes */ /* XXX Unless we implement the new 32byte message type */ if (ccb->csio.cdb_len > sizeof (((PTR_MSG_SCSI_IO_REQUEST)0)->CDB)) { ccb->ccb_h.status &= ~CAM_SIM_QUEUED; mpt_set_ccb_status(ccb, CAM_REQ_INVALID); xpt_done(ccb); return; } ccb->csio.scsi_status = SCSI_STATUS_OK; mpt_start(sim, ccb); break; case XPT_RESET_BUS: mpt_lprt(mpt, MPT_PRT_DEBUG, "XPT_RESET_BUS\n"); if (!raid_passthru) { CAMLOCK_2_MPTLOCK(mpt); (void)mpt_bus_reset(mpt, /*sleep_ok*/FALSE); MPTLOCK_2_CAMLOCK(mpt); } /* * mpt_bus_reset is always successful in that it * will fall back to a hard reset should a bus * reset attempt fail. */ ccb->ccb_h.status &= ~CAM_SIM_QUEUED; mpt_set_ccb_status(ccb, CAM_REQ_CMP); xpt_done(ccb); break; case XPT_ABORT: { union ccb *accb = ccb->cab.abort_ccb; CAMLOCK_2_MPTLOCK(mpt); switch (accb->ccb_h.func_code) { case XPT_ACCEPT_TARGET_IO: case XPT_IMMED_NOTIFY: ccb->ccb_h.status = mpt_abort_target_ccb(mpt, ccb); break; case XPT_CONT_TARGET_IO: mpt_prt(mpt, "cannot abort active CTIOs yet\n"); ccb->ccb_h.status = CAM_UA_ABORT; break; case XPT_SCSI_IO: ccb->ccb_h.status = CAM_UA_ABORT; break; default: ccb->ccb_h.status = CAM_REQ_INVALID; break; } MPTLOCK_2_CAMLOCK(mpt); xpt_done(ccb); break; } #ifdef CAM_NEW_TRAN_CODE #define IS_CURRENT_SETTINGS(c) (c->type == CTS_TYPE_CURRENT_SETTINGS) #else #define IS_CURRENT_SETTINGS(c) (c->flags & CCB_TRANS_CURRENT_SETTINGS) #endif #define DP_DISC_ENABLE 0x1 #define DP_DISC_DISABL 0x2 #define DP_DISC (DP_DISC_ENABLE|DP_DISC_DISABL) #define DP_TQING_ENABLE 0x4 #define DP_TQING_DISABL 0x8 #define DP_TQING (DP_TQING_ENABLE|DP_TQING_DISABL) #define DP_WIDE 0x10 #define DP_NARROW 0x20 #define DP_WIDTH (DP_WIDE|DP_NARROW) #define DP_SYNC 0x40 case XPT_SET_TRAN_SETTINGS: /* Nexus Settings */ cts = &ccb->cts; if (!IS_CURRENT_SETTINGS(cts)) { mpt_prt(mpt, "Attempt to set User settings\n"); ccb->ccb_h.status &= ~CAM_SIM_QUEUED; mpt_set_ccb_status(ccb, CAM_REQ_INVALID); xpt_done(ccb); break; } if (mpt->is_fc == 0 && mpt->is_sas == 0) { uint8_t dval = 0; u_int period = 0, offset = 0; #ifndef CAM_NEW_TRAN_CODE if (cts->valid & CCB_TRANS_DISC_VALID) { dval |= DP_DISC_ENABLE; } if (cts->valid & CCB_TRANS_TQ_VALID) { dval |= DP_TQING_ENABLE; } if (cts->valid & CCB_TRANS_BUS_WIDTH_VALID) { if (cts->bus_width) dval |= DP_WIDE; else dval |= DP_NARROW; } /* * Any SYNC RATE of nonzero and SYNC_OFFSET * of nonzero will cause us to go to the * selected (from NVRAM) maximum value for * this device. At a later point, we'll * allow finer control. */ if ((cts->valid & CCB_TRANS_SYNC_RATE_VALID) && (cts->valid & CCB_TRANS_SYNC_OFFSET_VALID)) { dval |= DP_SYNC; period = cts->sync_period; offset = cts->sync_offset; } #else struct ccb_trans_settings_scsi *scsi = &cts->proto_specific.scsi; struct ccb_trans_settings_spi *spi = &cts->xport_specific.spi; if ((spi->valid & CTS_SPI_VALID_DISC) != 0) { if ((spi->flags & CTS_SPI_FLAGS_DISC_ENB) != 0) dval |= DP_DISC_ENABLE; else dval |= DP_DISC_DISABL; } if ((scsi->valid & CTS_SCSI_VALID_TQ) != 0) { if ((scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0) dval |= DP_TQING_ENABLE; else dval |= DP_TQING_DISABL; } if ((spi->valid & CTS_SPI_VALID_BUS_WIDTH) != 0) { if (spi->bus_width == MSG_EXT_WDTR_BUS_16_BIT) dval |= DP_WIDE; else dval |= DP_NARROW; } if ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) && (spi->valid & CTS_SPI_VALID_SYNC_RATE) && (spi->sync_period && spi->sync_offset)) { dval |= DP_SYNC; period = spi->sync_period; offset = spi->sync_offset; } #endif CAMLOCK_2_MPTLOCK(mpt); if (dval & DP_DISC_ENABLE) { mpt->mpt_disc_enable |= (1 << tgt); } else if (dval & DP_DISC_DISABL) { mpt->mpt_disc_enable &= ~(1 << tgt); } if (dval & DP_TQING_ENABLE) { mpt->mpt_tag_enable |= (1 << tgt); } else if (dval & DP_TQING_DISABL) { mpt->mpt_tag_enable &= ~(1 << tgt); } if (dval & DP_WIDTH) { if (mpt_setwidth(mpt, tgt, dval & DP_WIDE)) { mpt_prt(mpt, "Set width Failed!\n"); ccb->ccb_h.status &= ~CAM_SIM_QUEUED; mpt_set_ccb_status(ccb, CAM_REQ_CMP_ERR); MPTLOCK_2_CAMLOCK(mpt); xpt_done(ccb); break; } } if (dval & DP_SYNC) { if (mpt_setsync(mpt, tgt, period, offset)) { mpt_prt(mpt, "Set sync Failed!\n"); ccb->ccb_h.status &= ~CAM_SIM_QUEUED; mpt_set_ccb_status(ccb, CAM_REQ_CMP_ERR); MPTLOCK_2_CAMLOCK(mpt); xpt_done(ccb); break; } } MPTLOCK_2_CAMLOCK(mpt); mpt_lprt(mpt, MPT_PRT_DEBUG, "SET tgt %d flags %x period %x off %x\n", tgt, dval, period, offset); } ccb->ccb_h.status &= ~CAM_SIM_QUEUED; mpt_set_ccb_status(ccb, CAM_REQ_CMP); xpt_done(ccb); break; case XPT_GET_TRAN_SETTINGS: cts = &ccb->cts; if (mpt->is_fc) { #ifndef CAM_NEW_TRAN_CODE /* * a lot of normal SCSI things don't make sense. */ cts->flags = CCB_TRANS_TAG_ENB | CCB_TRANS_DISC_ENB; cts->valid = CCB_TRANS_DISC_VALID | CCB_TRANS_TQ_VALID; /* * How do you measure the width of a high * speed serial bus? Well, in bytes. * * Offset and period make no sense, though, so we set * (above) a 'base' transfer speed to be gigabit. */ cts->bus_width = MSG_EXT_WDTR_BUS_8_BIT; #else struct ccb_trans_settings_fc *fc = &cts->xport_specific.fc; cts->protocol = PROTO_SCSI; cts->protocol_version = SCSI_REV_2; cts->transport = XPORT_FC; cts->transport_version = 0; fc->valid = CTS_FC_VALID_SPEED; fc->bitrate = 100000; /* XXX: Need for 2Gb/s */ /* XXX: need a port database for each target */ #endif } else if (mpt->is_sas) { #ifndef CAM_NEW_TRAN_CODE cts->flags = CCB_TRANS_TAG_ENB | CCB_TRANS_DISC_ENB; cts->valid = CCB_TRANS_DISC_VALID | CCB_TRANS_TQ_VALID; /* * How do you measure the width of a high * speed serial bus? Well, in bytes. * * Offset and period make no sense, though, so we set * (above) a 'base' transfer speed to be gigabit. */ cts->bus_width = MSG_EXT_WDTR_BUS_8_BIT; #else struct ccb_trans_settings_sas *sas = &cts->xport_specific.sas; cts->protocol = PROTO_SCSI; cts->protocol_version = SCSI_REV_3; cts->transport = XPORT_SAS; cts->transport_version = 0; sas->valid = CTS_SAS_VALID_SPEED; sas->bitrate = 300000; /* XXX: Default 3Gbps */ #endif } else { #ifdef CAM_NEW_TRAN_CODE struct ccb_trans_settings_scsi *scsi = &cts->proto_specific.scsi; struct ccb_trans_settings_spi *spi = &cts->xport_specific.spi; #endif uint8_t dval, pval, oval; int rv; /* * We aren't going off of Port PAGE2 params for * tagged queuing or disconnect capabilities * for current settings. For goal settings, * we assert all capabilities- we've had some * problems with reading NVRAM data. */ if (IS_CURRENT_SETTINGS(cts)) { CONFIG_PAGE_SCSI_DEVICE_0 tmp; dval = 0; tmp = mpt->mpt_dev_page0[tgt]; CAMLOCK_2_MPTLOCK(mpt); rv = mpt_read_cur_cfg_page(mpt, tgt, &tmp.Header, sizeof(tmp), /*sleep_ok*/FALSE, /*timeout_ms*/5000); if (rv) { mpt_prt(mpt, "cannot get target %d DP0\n", tgt); } mpt_lprt(mpt, MPT_PRT_DEBUG, "SPI Tgt %d Page 0: NParms %x " "Information %x\n", tgt, tmp.NegotiatedParameters, tmp.Information); MPTLOCK_2_CAMLOCK(mpt); if (tmp.NegotiatedParameters & MPI_SCSIDEVPAGE0_NP_WIDE) dval |= DP_WIDE; if (mpt->mpt_disc_enable & (1 << tgt)) { dval |= DP_DISC_ENABLE; } if (mpt->mpt_tag_enable & (1 << tgt)) { dval |= DP_TQING_ENABLE; } oval = (tmp.NegotiatedParameters >> 16) & 0xff; pval = (tmp.NegotiatedParameters >> 8) & 0xff; } else { /* * XXX: Fix wrt NVRAM someday. Attempts * XXX: to read port page2 device data * XXX: just returns zero in these areas. */ dval = DP_WIDE|DP_DISC|DP_TQING; oval = (mpt->mpt_port_page0.Capabilities >> 16); pval = (mpt->mpt_port_page0.Capabilities >> 8); } #ifndef CAM_NEW_TRAN_CODE cts->flags &= ~(CCB_TRANS_DISC_ENB|CCB_TRANS_TAG_ENB); if (dval & DP_DISC_ENABLE) { cts->flags |= CCB_TRANS_DISC_ENB; } if (dval & DP_TQING_ENABLE) { cts->flags |= CCB_TRANS_TAG_ENB; } if (dval & DP_WIDE) { cts->bus_width = MSG_EXT_WDTR_BUS_16_BIT; } else { cts->bus_width = MSG_EXT_WDTR_BUS_8_BIT; } cts->valid = CCB_TRANS_BUS_WIDTH_VALID | CCB_TRANS_DISC_VALID | CCB_TRANS_TQ_VALID; if (oval) { cts->sync_period = pval; cts->sync_offset = oval; cts->valid |= CCB_TRANS_SYNC_RATE_VALID | CCB_TRANS_SYNC_OFFSET_VALID; } #else cts->protocol = PROTO_SCSI; cts->protocol_version = SCSI_REV_2; cts->transport = XPORT_SPI; cts->transport_version = 2; scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB; spi->flags &= ~CTS_SPI_FLAGS_DISC_ENB; if (dval & DP_DISC_ENABLE) { spi->flags |= CTS_SPI_FLAGS_DISC_ENB; } if (dval & DP_TQING_ENABLE) { scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB; } if (oval && pval) { spi->sync_offset = oval; spi->sync_period = pval; spi->valid |= CTS_SPI_VALID_SYNC_OFFSET; spi->valid |= CTS_SPI_VALID_SYNC_RATE; } spi->valid |= CTS_SPI_VALID_BUS_WIDTH; if (dval & DP_WIDE) { spi->bus_width = MSG_EXT_WDTR_BUS_16_BIT; } else { spi->bus_width = MSG_EXT_WDTR_BUS_8_BIT; } if (cts->ccb_h.target_lun != CAM_LUN_WILDCARD) { scsi->valid = CTS_SCSI_VALID_TQ; spi->valid |= CTS_SPI_VALID_DISC; } else { scsi->valid = 0; } #endif mpt_lprt(mpt, MPT_PRT_DEBUG, "GET %s tgt %d flags %x period %x offset %x\n", IS_CURRENT_SETTINGS(cts) ? "ACTIVE" : "NVRAM", tgt, dval, pval, oval); } ccb->ccb_h.status &= ~CAM_SIM_QUEUED; mpt_set_ccb_status(ccb, CAM_REQ_CMP); xpt_done(ccb); break; case XPT_CALC_GEOMETRY: { struct ccb_calc_geometry *ccg; ccg = &ccb->ccg; if (ccg->block_size == 0) { ccb->ccb_h.status &= ~CAM_SIM_QUEUED; mpt_set_ccb_status(ccb, CAM_REQ_INVALID); xpt_done(ccb); break; } mpt_calc_geometry(ccg, /*extended*/1); KASSERT(ccb->ccb_h.status, ("zero ccb sts at %d\n", __LINE__)); xpt_done(ccb); break; } case XPT_PATH_INQ: /* Path routing inquiry */ { struct ccb_pathinq *cpi = &ccb->cpi; cpi->version_num = 1; cpi->target_sprt = 0; cpi->hba_eng_cnt = 0; cpi->max_lun = 7; cpi->bus_id = cam_sim_bus(sim); /* XXX Report base speed more accurately for FC/SAS, etc.*/ if (raid_passthru) { cpi->max_target = mpt->ioc_page2->MaxPhysDisks; cpi->hba_misc = PIM_NOBUSRESET; cpi->initiator_id = cpi->max_target + 1; cpi->hba_inquiry = PI_TAG_ABLE; if (mpt->is_fc) { cpi->base_transfer_speed = 100000; } else if (mpt->is_sas) { cpi->base_transfer_speed = 300000; } else { cpi->base_transfer_speed = 3300; cpi->hba_inquiry |= PI_SDTR_ABLE|PI_TAG_ABLE|PI_WIDE_16; } } else if (mpt->is_fc) { /* XXX SHOULD BE BASED UPON IOC FACTS XXX XXX */ cpi->max_target = 255; cpi->hba_misc = PIM_NOBUSRESET; cpi->initiator_id = mpt->mpt_ini_id; cpi->base_transfer_speed = 100000; cpi->hba_inquiry = PI_TAG_ABLE; } else if (mpt->is_sas) { cpi->max_target = 63; /* XXX */ cpi->hba_misc = PIM_NOBUSRESET; cpi->initiator_id = mpt->mpt_ini_id; cpi->base_transfer_speed = 300000; cpi->hba_inquiry = PI_TAG_ABLE; } else { cpi->initiator_id = mpt->mpt_ini_id; cpi->base_transfer_speed = 3300; cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE|PI_WIDE_16; cpi->hba_misc = 0; cpi->max_target = 15; } if ((mpt->role & MPT_ROLE_INITIATOR) == 0) { cpi->hba_misc |= PIM_NOINITIATOR; } if ((mpt->role & MPT_ROLE_TARGET) != 0) { cpi->target_sprt = PIT_PROCESSOR | PIT_DISCONNECT | PIT_TERM_IO; } else { cpi->target_sprt = 0; } strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); strncpy(cpi->hba_vid, "LSI", HBA_IDLEN); strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); cpi->unit_number = cam_sim_unit(sim); cpi->ccb_h.status = CAM_REQ_CMP; xpt_done(ccb); break; } case XPT_EN_LUN: /* Enable LUN as a target */ { int result; CAMLOCK_2_MPTLOCK(mpt); if (ccb->cel.enable) result = mpt_enable_lun(mpt, ccb->ccb_h.target_id, ccb->ccb_h.target_lun); else result = mpt_disable_lun(mpt, ccb->ccb_h.target_id, ccb->ccb_h.target_lun); MPTLOCK_2_CAMLOCK(mpt); if (result == 0) { mpt_set_ccb_status(ccb, CAM_REQ_CMP); } else { mpt_set_ccb_status(ccb, CAM_REQ_CMP_ERR); } xpt_done(ccb); break; } case XPT_NOTIFY_ACK: /* recycle notify ack */ case XPT_IMMED_NOTIFY: /* Add Immediate Notify Resource */ case XPT_ACCEPT_TARGET_IO: /* Add Accept Target IO Resource */ { tgt_resource_t *trtp; lun_id_t lun = ccb->ccb_h.target_lun; ccb->ccb_h.sim_priv.entries[0].field = 0; ccb->ccb_h.sim_priv.entries[1].ptr = mpt; ccb->ccb_h.flags = 0; if (lun == CAM_LUN_WILDCARD) { if (ccb->ccb_h.target_id != CAM_TARGET_WILDCARD) { mpt_set_ccb_status(ccb, CAM_REQ_INVALID); xpt_done(ccb); break; } trtp = &mpt->trt_wildcard; } else if (lun >= MPT_MAX_LUNS) { mpt_set_ccb_status(ccb, CAM_REQ_INVALID); xpt_done(ccb); break; } else { trtp = &mpt->trt[lun]; } CAMLOCK_2_MPTLOCK(mpt); if (ccb->ccb_h.func_code == XPT_ACCEPT_TARGET_IO) { mpt_lprt(mpt, MPT_PRT_DEBUG1, "Put FREE ATIO %p lun %d\n", ccb, lun); STAILQ_INSERT_TAIL(&trtp->atios, &ccb->ccb_h, sim_links.stqe); } else if (ccb->ccb_h.func_code == XPT_IMMED_NOTIFY) { mpt_lprt(mpt, MPT_PRT_DEBUG1, "Put FREE INOT lun %d\n", lun); STAILQ_INSERT_TAIL(&trtp->inots, &ccb->ccb_h, sim_links.stqe); } else { mpt_lprt(mpt, MPT_PRT_ALWAYS, "Got Notify ACK\n"); } mpt_set_ccb_status(ccb, CAM_REQ_INPROG); MPTLOCK_2_CAMLOCK(mpt); break; } case XPT_CONT_TARGET_IO: CAMLOCK_2_MPTLOCK(mpt); mpt_target_start_io(mpt, ccb); MPTLOCK_2_CAMLOCK(mpt); break; default: ccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(ccb); break; } } static int mpt_setwidth(struct mpt_softc *mpt, int tgt, int onoff) { CONFIG_PAGE_SCSI_DEVICE_1 tmp; int rv; tmp = mpt->mpt_dev_page1[tgt]; if (onoff) { tmp.RequestedParameters |= MPI_SCSIDEVPAGE1_RP_WIDE; } else { tmp.RequestedParameters &= ~MPI_SCSIDEVPAGE1_RP_WIDE; } rv = mpt_write_cur_cfg_page(mpt, tgt, &tmp.Header, sizeof(tmp), /*sleep_ok*/FALSE, /*timeout_ms*/5000); if (rv) { mpt_prt(mpt, "mpt_setwidth: write cur page failed\n"); return (-1); } rv = mpt_read_cur_cfg_page(mpt, tgt, &tmp.Header, sizeof(tmp), /*sleep_ok*/FALSE, /*timeout_ms*/5000); if (rv) { mpt_prt(mpt, "mpt_setwidth: read cur page failed\n"); return (-1); } mpt->mpt_dev_page1[tgt] = tmp; mpt_lprt(mpt, MPT_PRT_DEBUG, "SPI Target %d Page 1: RequestedParameters %x Config %x\n", tgt, mpt->mpt_dev_page1[tgt].RequestedParameters, mpt->mpt_dev_page1[tgt].Configuration); return (0); } static int mpt_setsync(struct mpt_softc *mpt, int tgt, int period, int offset) { CONFIG_PAGE_SCSI_DEVICE_1 tmp; int rv; tmp = mpt->mpt_dev_page1[tgt]; tmp.RequestedParameters &= ~MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK; tmp.RequestedParameters &= ~MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK; tmp.RequestedParameters &= ~MPI_SCSIDEVPAGE1_RP_DT; tmp.RequestedParameters &= ~MPI_SCSIDEVPAGE1_RP_QAS; tmp.RequestedParameters &= ~MPI_SCSIDEVPAGE1_RP_IU; /* * XXX: For now, we're ignoring specific settings */ if (period && offset) { int factor, offset, np; factor = (mpt->mpt_port_page0.Capabilities >> 8) & 0xff; offset = (mpt->mpt_port_page0.Capabilities >> 16) & 0xff; np = 0; if (factor < 0x9) { np |= MPI_SCSIDEVPAGE1_RP_QAS; np |= MPI_SCSIDEVPAGE1_RP_IU; } if (factor < 0xa) { np |= MPI_SCSIDEVPAGE1_RP_DT; } np |= (factor << 8) | (offset << 16); tmp.RequestedParameters |= np; } rv = mpt_write_cur_cfg_page(mpt, tgt, &tmp.Header, sizeof(tmp), /*sleep_ok*/FALSE, /*timeout_ms*/5000); if (rv) { mpt_prt(mpt, "mpt_setsync: write cur page failed\n"); return (-1); } rv = mpt_read_cur_cfg_page(mpt, tgt, &tmp.Header, sizeof(tmp), /*sleep_ok*/FALSE, /*timeout_ms*/500); if (rv) { mpt_prt(mpt, "mpt_setsync: read cur page failed\n"); return (-1); } mpt->mpt_dev_page1[tgt] = tmp; mpt_lprt(mpt, MPT_PRT_DEBUG, "SPI Target %d Page 1: RParams %x Config %x\n", tgt, mpt->mpt_dev_page1[tgt].RequestedParameters, mpt->mpt_dev_page1[tgt].Configuration); return (0); } static void mpt_calc_geometry(struct ccb_calc_geometry *ccg, int extended) { #if __FreeBSD_version >= 500000 cam_calc_geometry(ccg, extended); #else uint32_t size_mb; uint32_t secs_per_cylinder; if (ccg->block_size == 0) { ccg->ccb_h.status = CAM_REQ_INVALID; return; } size_mb = ccg->volume_size / ((1024L * 1024L) / ccg->block_size); if (size_mb > 1024 && extended) { ccg->heads = 255; ccg->secs_per_track = 63; } else { ccg->heads = 64; ccg->secs_per_track = 32; } secs_per_cylinder = ccg->heads * ccg->secs_per_track; ccg->cylinders = ccg->volume_size / secs_per_cylinder; ccg->ccb_h.status = CAM_REQ_CMP; #endif } /****************************** Timeout Recovery ******************************/ static int mpt_spawn_recovery_thread(struct mpt_softc *mpt) { int error; error = mpt_kthread_create(mpt_recovery_thread, mpt, &mpt->recovery_thread, /*flags*/0, /*altstack*/0, "mpt_recovery%d", mpt->unit); return (error); } static void mpt_terminate_recovery_thread(struct mpt_softc *mpt) { if (mpt->recovery_thread == NULL) { return; } mpt->shutdwn_recovery = 1; wakeup(mpt); /* * Sleep on a slightly different location * for this interlock just for added safety. */ mpt_sleep(mpt, &mpt->recovery_thread, PUSER, "thtrm", 0); } static void mpt_recovery_thread(void *arg) { struct mpt_softc *mpt; #if __FreeBSD_version >= 500000 mtx_lock(&Giant); #endif mpt = (struct mpt_softc *)arg; MPT_LOCK(mpt); for (;;) { if (TAILQ_EMPTY(&mpt->request_timeout_list) != 0 && mpt->shutdwn_recovery == 0) mpt_sleep(mpt, mpt, PUSER, "idle", 0); if (mpt->shutdwn_recovery != 0) { break; } mpt_recover_commands(mpt); } mpt->recovery_thread = NULL; wakeup(&mpt->recovery_thread); MPT_UNLOCK(mpt); #if __FreeBSD_version >= 500000 mtx_unlock(&Giant); #endif kthread_exit(0); } static int mpt_scsi_send_tmf(struct mpt_softc *mpt, u_int type, u_int flags, u_int channel, u_int target, u_int lun, u_int abort_ctx, int sleep_ok) { MSG_SCSI_TASK_MGMT *tmf_req; int error; /* * Wait for any current TMF request to complete. * We're only allowed to issue one TMF at a time. */ error = mpt_wait_req(mpt, mpt->tmf_req, REQ_STATE_FREE, REQ_STATE_MASK, sleep_ok, MPT_TMF_MAX_TIMEOUT); if (error != 0) { mpt_reset(mpt, TRUE); return (ETIMEDOUT); } if ((mpt->tmf_req->serno = mpt->sequence++) == 0) { mpt->tmf_req->serno = mpt->sequence++; } mpt->tmf_req->state = REQ_STATE_ALLOCATED|REQ_STATE_QUEUED; TAILQ_INSERT_HEAD(&mpt->request_pending_list, mpt->tmf_req, links); tmf_req = (MSG_SCSI_TASK_MGMT *)mpt->tmf_req->req_vbuf; memset(tmf_req, 0, sizeof(*tmf_req)); tmf_req->TargetID = target; tmf_req->Bus = channel; tmf_req->ChainOffset = 0; tmf_req->Function = MPI_FUNCTION_SCSI_TASK_MGMT; tmf_req->Reserved = 0; tmf_req->TaskType = type; tmf_req->Reserved1 = 0; tmf_req->MsgFlags = flags; tmf_req->MsgContext = htole32(mpt->tmf_req->index | scsi_tmf_handler_id); memset(&tmf_req->LUN, 0, sizeof(tmf_req->LUN) + sizeof(tmf_req->Reserved2)); if (lun > 256) { tmf_req->LUN[0] = 0x40 | ((lun >> 8) & 0x3f); tmf_req->LUN[1] = lun & 0xff; } else { tmf_req->LUN[1] = lun; } tmf_req->TaskMsgContext = abort_ctx; mpt_lprt(mpt, MPT_PRT_INFO, "Issuing TMF %p:%u with MsgContext of 0x%x\n", mpt->tmf_req, mpt->tmf_req->serno, tmf_req->MsgContext); if (mpt->verbose > MPT_PRT_DEBUG) mpt_print_request(tmf_req); if (mpt->is_fc || mpt->is_sas) { mpt_send_cmd(mpt, mpt->tmf_req); error = MPT_OK; } else { error = mpt_send_handshake_cmd(mpt, sizeof(*tmf_req), tmf_req); } if (error != MPT_OK) { mpt_reset(mpt, TRUE); } return (error); } /* * When a command times out, it is placed on the requeust_timeout_list * and we wake our recovery thread. The MPT-Fusion architecture supports * only a single TMF operation at a time, so we serially abort/bdr, etc, * the timedout transactions. The next TMF is issued either by the * completion handler of the current TMF waking our recovery thread, * or the TMF timeout handler causing a hard reset sequence. */ static void mpt_recover_commands(struct mpt_softc *mpt) { request_t *req; union ccb *ccb; int error; if (TAILQ_EMPTY(&mpt->request_timeout_list) != 0) { /* * No work to do- leave. */ mpt_prt(mpt, "mpt_recover_commands: no requests.\n"); return; } /* * Flush any commands whose completion coincides with their timeout. */ mpt_intr(mpt); if (TAILQ_EMPTY(&mpt->request_timeout_list) != 0) { /* * The timedout commands have already * completed. This typically means * that either the timeout value was on * the hairy edge of what the device * requires or - more likely - interrupts * are not happening. */ mpt_prt(mpt, "Timedout requests already complete. " "Interrupts may not be functioning.\n"); mpt_enable_ints(mpt); return; } /* * We have no visibility into the current state of the * controller, so attempt to abort the commands in the * order they timed-out. */ while ((req = TAILQ_FIRST(&mpt->request_timeout_list)) != NULL) { u_int status; mpt_prt(mpt, "Attempting to abort req %p:%u\n", req, req->serno); ccb = req->ccb; mpt_set_ccb_status(ccb, CAM_CMD_TIMEOUT); error = mpt_scsi_send_tmf(mpt, MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK, 0, 0, ccb->ccb_h.target_id, ccb->ccb_h.target_lun, htole32(req->index | scsi_io_handler_id), TRUE); if (error != 0) { /* * mpt_scsi_send_tmf hard resets on failure, so no * need to do so here. Our queue should be emptied * by the hard reset. */ continue; } error = mpt_wait_req(mpt, mpt->tmf_req, REQ_STATE_DONE, REQ_STATE_DONE, TRUE, 500); if (error != 0) { /* * If we've errored out and the transaction is still * pending, reset the controller. */ mpt_prt(mpt, "mpt_recover_commands: abort timed-out. " "Resetting controller\n"); mpt_reset(mpt, TRUE); continue; } /* * TMF is complete. */ TAILQ_REMOVE(&mpt->request_timeout_list, req, links); mpt->tmf_req->state = REQ_STATE_FREE; status = mpt->tmf_req->IOCStatus; if ((status & MPI_IOCSTATUS_MASK) == MPI_SCSI_STATUS_SUCCESS) { mpt_prt(mpt, "abort of req %p:%u completed\n", req, req->serno); continue; } mpt_lprt(mpt, MPT_PRT_DEBUG, "mpt_recover_commands: abort of " "%p:%u failed with status 0x%x\n. Resetting controller.", req, req->serno, status); /* * If the abort attempt fails for any reason, reset the bus. * We should find all of the timed-out commands on our * list are in the done state after this completes. */ mpt_bus_reset(mpt, TRUE); } } /************************ Target Mode Support ****************************/ static void mpt_fc_add_els(struct mpt_softc *mpt, request_t *req) { MSG_LINK_SERVICE_BUFFER_POST_REQUEST *fc; PTR_SGE_TRANSACTION32 tep; PTR_SGE_SIMPLE32 se; bus_addr_t paddr; paddr = req->req_pbuf; paddr += MPT_RQSL(mpt); fc = req->req_vbuf; memset(fc, 0, MPT_REQUEST_AREA); fc->BufferCount = 1; fc->Function = MPI_FUNCTION_FC_LINK_SRVC_BUF_POST; fc->MsgContext = htole32(req->index | fc_els_handler_id); /* * Okay, set up ELS buffer pointers. ELS buffer pointers * consist of a TE SGL element (with details length of zero) * followe by a SIMPLE SGL element which holds the address * of the buffer. */ tep = (PTR_SGE_TRANSACTION32) &fc->SGL; tep->ContextSize = 4; tep->Flags = 0; tep->TransactionContext[0] = htole32(req->index | fc_els_handler_id); se = (PTR_SGE_SIMPLE32) &tep->TransactionDetails[0]; se->FlagsLength = MPI_SGE_FLAGS_HOST_TO_IOC | MPI_SGE_FLAGS_SIMPLE_ELEMENT | MPI_SGE_FLAGS_LAST_ELEMENT | MPI_SGE_FLAGS_END_OF_LIST | MPI_SGE_FLAGS_END_OF_BUFFER; se->FlagsLength <<= MPI_SGE_FLAGS_SHIFT; se->FlagsLength |= (MPT_NRFM(mpt) - MPT_RQSL(mpt)); se->Address = (uint32_t) paddr; mpt_check_doorbell(mpt); mpt_send_cmd(mpt, req); } static void mpt_post_target_command(struct mpt_softc *mpt, request_t *req, int ioindex) { PTR_MSG_TARGET_CMD_BUFFER_POST_REQUEST fc; PTR_CMD_BUFFER_DESCRIPTOR cb; bus_addr_t paddr; paddr = req->req_pbuf; paddr += MPT_RQSL(mpt); memset(req->req_vbuf, 0, MPT_REQUEST_AREA); MPT_TGT_STATE(mpt, req)->state = TGT_STATE_LOADING; fc = req->req_vbuf; fc->BufferCount = 1; fc->Function = MPI_FUNCTION_TARGET_CMD_BUFFER_POST; fc->MsgContext = htole32(req->index | mpt->scsi_tgt_handler_id); cb = &fc->Buffer[0]; cb->IoIndex = htole16(ioindex); cb->u.PhysicalAddress32 = (U32) paddr; mpt_check_doorbell(mpt); mpt_send_cmd(mpt, req); } static void mpt_add_target_commands(struct mpt_softc *mpt) { int i, max; if (mpt->tgt_cmd_ptrs) { return; } max = MPT_MAX_REQUESTS(mpt) >> 1; if (max > mpt->mpt_max_tgtcmds) { max = mpt->mpt_max_tgtcmds; } mpt->tgt_cmd_ptrs = malloc(max * sizeof (void *), M_DEVBUF, M_NOWAIT | M_ZERO); if (mpt->tgt_cmd_ptrs == NULL) { mpt_prt(mpt, "could not allocate cmdptrs\n"); return; } mpt->tgt_cmds_allocated = max; for (i = 0; i < max; i++) { request_t *req; req = mpt_get_request(mpt, FALSE); if (req == NULL) { break; } req->state |= REQ_STATE_LOCKED; mpt->tgt_cmd_ptrs[i] = req; mpt_post_target_command(mpt, req, i); } if (i == 0) { mpt_lprt(mpt, MPT_PRT_ERROR, "could not add any target bufs\n"); free(mpt->tgt_cmd_ptrs, M_DEVBUF); mpt->tgt_cmd_ptrs = NULL; mpt->tgt_cmds_allocated = 0; } else if (i < max) { mpt_lprt(mpt, MPT_PRT_WARN, "added %d of %d target bufs\n", i, max); } } static int mpt_enable_lun(struct mpt_softc *mpt, target_id_t tgt, lun_id_t lun) { if (tgt == CAM_TARGET_WILDCARD && lun == CAM_LUN_WILDCARD) { mpt->twildcard = 1; } else if (lun >= MPT_MAX_LUNS) { return (EINVAL); } else if (tgt != CAM_TARGET_WILDCARD && tgt != 0) { return (EINVAL); } if (mpt->tenabled == 0) { #if 0 if (mpt->is_fc) { (void) mpt_fc_reset_link(mpt, 0); } #endif mpt->tenabled = 1; } if (lun == CAM_LUN_WILDCARD) { mpt->trt_wildcard.enabled = 1; } else { mpt->trt[lun].enabled = 1; } return (0); } static int mpt_disable_lun(struct mpt_softc *mpt, target_id_t tgt, lun_id_t lun) { int i; if (tgt == CAM_TARGET_WILDCARD && lun == CAM_LUN_WILDCARD) { mpt->twildcard = 0; } else if (lun >= MPT_MAX_LUNS) { return (EINVAL); } else if (tgt != CAM_TARGET_WILDCARD && tgt != 0) { return (EINVAL); } if (lun == CAM_LUN_WILDCARD) { mpt->trt_wildcard.enabled = 0; } else { mpt->trt[lun].enabled = 0; } for (i = 0; i < MPT_MAX_LUNS; i++) { if (mpt->trt[lun].enabled) { break; } } if (i == MPT_MAX_LUNS && mpt->twildcard == 0) { mpt->tenabled = 0; #if 0 if (mpt->is_fc) { (void) mpt_fc_reset_link(mpt, 0); } #endif } return (0); } /* * Called with MPT lock held */ static void mpt_target_start_io(struct mpt_softc *mpt, union ccb *ccb) { struct ccb_scsiio *csio = &ccb->csio; request_t *cmd_req = MPT_TAG_2_REQ(mpt, csio->tag_id); mpt_tgt_state_t *tgt = MPT_TGT_STATE(mpt, cmd_req); if (tgt->state != TGT_STATE_IN_CAM) { mpt_prt(mpt, "ccb flags 0x%x tag 0x%08x had bad request " "starting I/O\n", csio->ccb_h.flags, csio->tag_id); mpt_tgt_dump_req_state(mpt, cmd_req); mpt_set_ccb_status(ccb, CAM_REQ_CMP_ERR); MPTLOCK_2_CAMLOCK(mpt); xpt_done(ccb); CAMLOCK_2_MPTLOCK(mpt); return; } if (csio->dxfer_len) { bus_dmamap_callback_t *cb; PTR_MSG_TARGET_ASSIST_REQUEST ta; request_t *req; KASSERT((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE, ("dxfer_len %u but direction is NONE\n", csio->dxfer_len)); if ((req = mpt_get_request(mpt, FALSE)) == NULL) { if (mpt->outofbeer == 0) { mpt->outofbeer = 1; xpt_freeze_simq(mpt->sim, 1); mpt_lprt(mpt, MPT_PRT_DEBUG, "FREEZEQ\n"); } ccb->ccb_h.status &= ~CAM_SIM_QUEUED; mpt_set_ccb_status(ccb, CAM_REQUEUE_REQ); MPTLOCK_2_CAMLOCK(mpt); xpt_done(ccb); CAMLOCK_2_MPTLOCK(mpt); return; } ccb->ccb_h.status = CAM_SIM_QUEUED | CAM_REQ_INPROG; if (sizeof (bus_addr_t) > 4) { cb = mpt_execute_req_a64; } else { cb = mpt_execute_req; } req->ccb = ccb; ccb->ccb_h.ccb_req_ptr = req; /* * Record the currently active ccb and the * request for it in our target state area. */ tgt->ccb = ccb; tgt->req = req; memset(req->req_vbuf, 0, MPT_RQSL(mpt)); ta = req->req_vbuf; if (mpt->is_fc) { ; } else if (mpt->is_sas == 0) { PTR_MPI_TARGET_SSP_CMD_BUFFER ssp = cmd_req->req_vbuf; ta->QueueTag = ssp->InitiatorTag; } else { PTR_MPI_TARGET_SCSI_SPI_CMD_BUFFER sp = cmd_req->req_vbuf; ta->QueueTag = sp->Tag; } ta->Function = MPI_FUNCTION_TARGET_ASSIST; ta->MsgContext = htole32(req->index | mpt->scsi_tgt_handler_id); ta->ReplyWord = htole32(tgt->reply_desc); if (csio->ccb_h.target_lun > 256) { ta->LUN[0] = 0x40 | ((csio->ccb_h.target_lun >> 8) & 0x3f); ta->LUN[1] = csio->ccb_h.target_lun & 0xff; } else { ta->LUN[1] = csio->ccb_h.target_lun; } ta->RelativeOffset = tgt->bytes_xfered; ta->DataLength = ccb->csio.dxfer_len; if (ta->DataLength > tgt->resid) { ta->DataLength = tgt->resid; } /* * XXX Should be done after data transfer completes? */ tgt->resid -= csio->dxfer_len; tgt->bytes_xfered += csio->dxfer_len; if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) { ta->TargetAssistFlags |= TARGET_ASSIST_FLAGS_DATA_DIRECTION; } #ifdef WE_TRUST_AUTO_GOOD_STATUS if ((ccb->ccb_h.flags & CAM_SEND_STATUS) && csio->scsi_status == SCSI_STATUS_OK && tgt->resid == 0) { ta->TargetAssistFlags |= TARGET_ASSIST_FLAGS_AUTO_STATUS; } #endif tgt->state = TGT_STATE_SETTING_UP_FOR_DATA; mpt_lprt(mpt, MPT_PRT_DEBUG, "DATA_CCB %p tag %x %u bytes %u resid flg %x req %p:%u " "nxtstate=%d\n", csio, csio->tag_id, csio->dxfer_len, tgt->resid, ccb->ccb_h.flags, req, req->serno, tgt->state); MPTLOCK_2_CAMLOCK(mpt); if ((ccb->ccb_h.flags & CAM_SCATTER_VALID) == 0) { if ((ccb->ccb_h.flags & CAM_DATA_PHYS) == 0) { int error; int s = splsoftvm(); error = bus_dmamap_load(mpt->buffer_dmat, req->dmap, csio->data_ptr, csio->dxfer_len, cb, req, 0); splx(s); if (error == EINPROGRESS) { xpt_freeze_simq(mpt->sim, 1); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; } } else { /* * We have been given a pointer to single * physical buffer. */ struct bus_dma_segment seg; seg.ds_addr = (bus_addr_t) (vm_offset_t)csio->data_ptr; seg.ds_len = csio->dxfer_len; (*cb)(req, &seg, 1, 0); } } else { /* * We have been given a list of addresses. * This case could be easily supported but they are not * currently generated by the CAM subsystem so there * is no point in wasting the time right now. */ struct bus_dma_segment *sgs; if ((ccb->ccb_h.flags & CAM_SG_LIST_PHYS) == 0) { (*cb)(req, NULL, 0, EFAULT); } else { /* Just use the segments provided */ sgs = (struct bus_dma_segment *)csio->data_ptr; (*cb)(req, sgs, csio->sglist_cnt, 0); } } CAMLOCK_2_MPTLOCK(mpt); } else { uint8_t *sp = NULL, sense[MPT_SENSE_SIZE]; /* * XXX: I don't know why this seems to happen, but * XXX: completing the CCB seems to make things happy. * XXX: This seems to happen if the initiator requests * XXX: enough data that we have to do multiple CTIOs. */ if ((ccb->ccb_h.flags & CAM_SEND_STATUS) == 0) { mpt_lprt(mpt, MPT_PRT_DEBUG, "Meaningless STATUS CCB (%p): flags %x status %x " "resid %d bytes_xfered %u\n", ccb, ccb->ccb_h.flags, ccb->ccb_h.status, tgt->resid, tgt->bytes_xfered); mpt_set_ccb_status(ccb, CAM_REQ_CMP); ccb->ccb_h.status &= ~CAM_SIM_QUEUED; MPTLOCK_2_CAMLOCK(mpt); xpt_done(ccb); CAMLOCK_2_MPTLOCK(mpt); return; } if (ccb->ccb_h.flags & CAM_SEND_SENSE) { sp = sense; memcpy(sp, &csio->sense_data, min(csio->sense_len, MPT_SENSE_SIZE)); } mpt_scsi_tgt_status(mpt, ccb, cmd_req, csio->scsi_status, sp); } } /* * Abort queued up CCBs */ static cam_status mpt_abort_target_ccb(struct mpt_softc *mpt, union ccb *ccb) { struct mpt_hdr_stailq *lp; struct ccb_hdr *srch; int found = 0; union ccb *accb = ccb->cab.abort_ccb; tgt_resource_t *trtp; mpt_lprt(mpt, MPT_PRT_DEBUG, "aborting ccb %p\n", accb); if (ccb->ccb_h.target_lun == CAM_LUN_WILDCARD) { trtp = &mpt->trt_wildcard; } else { trtp = &mpt->trt[ccb->ccb_h.target_lun]; } if (accb->ccb_h.func_code == XPT_ACCEPT_TARGET_IO) { lp = &trtp->atios; } else if (accb->ccb_h.func_code == XPT_IMMED_NOTIFY) { lp = &trtp->inots; } else { return (CAM_REQ_INVALID); } STAILQ_FOREACH(srch, lp, sim_links.stqe) { if (srch == &accb->ccb_h) { found = 1; STAILQ_REMOVE(lp, srch, ccb_hdr, sim_links.stqe); break; } } if (found) { accb->ccb_h.status = CAM_REQ_ABORTED; xpt_done(accb); return (CAM_REQ_CMP); } mpt_prt(mpt, "mpt_abort_tgt_ccb: CCB %p not found\n", ccb); return (CAM_PATH_INVALID); } /* * Ask the MPT to abort the current target command */ static int mpt_abort_target_cmd(struct mpt_softc *mpt, request_t *cmd_req) { int error; request_t *req; PTR_MSG_TARGET_MODE_ABORT abtp; req = mpt_get_request(mpt, FALSE); if (req == NULL) { return (-1); } abtp = req->req_vbuf; memset(abtp, 0, sizeof (*abtp)); abtp->MsgContext = htole32(req->index | mpt->scsi_tgt_handler_id); abtp->AbortType = TARGET_MODE_ABORT_TYPE_EXACT_IO; abtp->Function = MPI_FUNCTION_TARGET_MODE_ABORT; abtp->ReplyWord = htole32(MPT_TGT_STATE(mpt, cmd_req)->reply_desc); error = 0; if (mpt->is_fc || mpt->is_sas) { mpt_send_cmd(mpt, req); } else { error = mpt_send_handshake_cmd(mpt, sizeof(*req), req); } return (error); } /* * WE_TRUST_AUTO_GOOD_STATUS- I've found that setting * TARGET_STATUS_SEND_FLAGS_AUTO_GOOD_STATUS leads the * FC929 to set bogus FC_RSP fields (nonzero residuals * but w/o RESID fields set). This causes QLogic initiators * to think maybe that a frame was lost. * * WE_CAN_USE_AUTO_REPOST- we can't use AUTO_REPOST because * we use allocated requests to do TARGET_ASSIST and we * need to know when to release them. */ static void mpt_scsi_tgt_status(struct mpt_softc *mpt, union ccb *ccb, request_t *cmd_req, uint8_t status, uint8_t const *sense_data) { uint8_t *cmd_vbuf; mpt_tgt_state_t *tgt; PTR_MSG_TARGET_STATUS_SEND_REQUEST tp; request_t *req; bus_addr_t paddr; int resplen = 0; cmd_vbuf = cmd_req->req_vbuf; cmd_vbuf += MPT_RQSL(mpt); tgt = MPT_TGT_STATE(mpt, cmd_req); if ((req = mpt_get_request(mpt, FALSE)) == NULL) { if (mpt->outofbeer == 0) { mpt->outofbeer = 1; xpt_freeze_simq(mpt->sim, 1); mpt_lprt(mpt, MPT_PRT_DEBUG, "FREEZEQ\n"); } if (ccb) { ccb->ccb_h.status &= ~CAM_SIM_QUEUED; mpt_set_ccb_status(ccb, CAM_REQUEUE_REQ); MPTLOCK_2_CAMLOCK(mpt); xpt_done(ccb); CAMLOCK_2_MPTLOCK(mpt); } else { mpt_prt(mpt, "XXXX could not allocate status req- dropping\n"); } return; } req->ccb = ccb; if (ccb) { ccb->ccb_h.ccb_mpt_ptr = mpt; ccb->ccb_h.ccb_req_ptr = req; } /* * Record the currently active ccb, if any, and the * request for it in our target state area. */ tgt->ccb = ccb; tgt->req = req; tgt->state = TGT_STATE_SENDING_STATUS; tp = req->req_vbuf; paddr = req->req_pbuf; paddr += MPT_RQSL(mpt); memset(tp, 0, sizeof (*tp)); tp->Function = MPI_FUNCTION_TARGET_STATUS_SEND; if (mpt->is_fc) { PTR_MPI_TARGET_FCP_CMD_BUFFER fc = (PTR_MPI_TARGET_FCP_CMD_BUFFER) cmd_vbuf; uint8_t *sts_vbuf; uint32_t *rsp; sts_vbuf = req->req_vbuf; sts_vbuf += MPT_RQSL(mpt); rsp = (uint32_t *) sts_vbuf; memcpy(tp->LUN, fc->FcpLun, sizeof (tp->LUN)); /* * The MPI_TARGET_FCP_RSP_BUFFER define is unfortunate. * It has to be big-endian in memory and is organized * in 32 bit words, which are much easier to deal with * as words which are swizzled as needed. * * All we're filling here is the FC_RSP payload. * We may just have the chip synthesize it if * we have no residual and an OK status. * */ memset(rsp, 0, sizeof (MPI_TARGET_FCP_RSP_BUFFER)); rsp[2] = status; if (tgt->resid) { rsp[2] |= 0x800; rsp[3] = htobe32(tgt->resid); #ifdef WE_TRUST_AUTO_GOOD_STATUS resplen = sizeof (MPI_TARGET_FCP_RSP_BUFFER); #endif } if (status == SCSI_STATUS_CHECK_COND) { int i; rsp[2] |= 0x200; rsp[4] = htobe32(MPT_SENSE_SIZE); memcpy(&rsp[8], sense_data, MPT_SENSE_SIZE); for (i = 8; i < (8 + (MPT_SENSE_SIZE >> 2)); i++) { rsp[i] = htobe32(rsp[i]); } #ifdef WE_TRUST_AUTO_GOOD_STATUS resplen = sizeof (MPI_TARGET_FCP_RSP_BUFFER); #endif } #ifndef WE_TRUST_AUTO_GOOD_STATUS resplen = sizeof (MPI_TARGET_FCP_RSP_BUFFER); #endif rsp[2] = htobe32(rsp[2]); } else if (mpt->is_sas) { PTR_MPI_TARGET_SSP_CMD_BUFFER ssp = (PTR_MPI_TARGET_SSP_CMD_BUFFER) cmd_vbuf; memcpy(tp->LUN, ssp->LogicalUnitNumber, sizeof (tp->LUN)); } else { PTR_MPI_TARGET_SCSI_SPI_CMD_BUFFER sp = (PTR_MPI_TARGET_SCSI_SPI_CMD_BUFFER) cmd_vbuf; tp->StatusCode = status; tp->QueueTag = htole16(sp->Tag); memcpy(tp->LUN, sp->LogicalUnitNumber, sizeof (tp->LUN)); } tp->ReplyWord = htole32(tgt->reply_desc); tp->MsgContext = htole32(req->index | mpt->scsi_tgt_handler_id); #ifdef WE_CAN_USE_AUTO_REPOST tp->MsgFlags = TARGET_STATUS_SEND_FLAGS_REPOST_CMD_BUFFER; #endif if (status == SCSI_STATUS_OK && resplen == 0) { tp->MsgFlags |= TARGET_STATUS_SEND_FLAGS_AUTO_GOOD_STATUS; } else { tp->StatusDataSGE.u.Address32 = (uint32_t) paddr; tp->StatusDataSGE.FlagsLength = MPI_SGE_FLAGS_HOST_TO_IOC | MPI_SGE_FLAGS_SIMPLE_ELEMENT | MPI_SGE_FLAGS_LAST_ELEMENT | MPI_SGE_FLAGS_END_OF_LIST | MPI_SGE_FLAGS_END_OF_BUFFER; tp->StatusDataSGE.FlagsLength <<= MPI_SGE_FLAGS_SHIFT; tp->StatusDataSGE.FlagsLength |= resplen; } mpt_lprt(mpt, MPT_PRT_DEBUG, "STATUS_CCB %p (wit%s sense) tag %x req %p:%u resid %u\n", ccb, sense_data?"h" : "hout", ccb? ccb->csio.tag_id : -1, req, req->serno, tgt->resid); if (ccb) { ccb->ccb_h.status = CAM_SIM_QUEUED | CAM_REQ_INPROG; ccb->ccb_h.timeout_ch = timeout(mpt_timeout, (caddr_t)ccb, hz); } mpt_send_cmd(mpt, req); } static void mpt_scsi_tgt_tsk_mgmt(struct mpt_softc *mpt, request_t *req, mpt_task_mgmt_t fc, tgt_resource_t *trtp, int init_id) { struct ccb_immed_notify *inot; mpt_tgt_state_t *tgt; tgt = MPT_TGT_STATE(mpt, req); inot = (struct ccb_immed_notify *) STAILQ_FIRST(&trtp->inots); if (inot == NULL) { mpt_lprt(mpt, MPT_PRT_WARN, "no INOTSs- sending back BSY\n"); mpt_scsi_tgt_status(mpt, NULL, req, SCSI_STATUS_BUSY, NULL); return; } STAILQ_REMOVE_HEAD(&trtp->inots, sim_links.stqe); mpt_lprt(mpt, MPT_PRT_DEBUG1, "Get FREE INOT %p lun %d\n", inot, inot->ccb_h.target_lun); memset(&inot->sense_data, 0, sizeof (inot->sense_data)); inot->sense_len = 0; memset(inot->message_args, 0, sizeof (inot->message_args)); inot->initiator_id = init_id; /* XXX */ /* * This is a somewhat grotesque attempt to map from task management * to old style SCSI messages. God help us all. */ switch (fc) { case MPT_ABORT_TASK_SET: inot->message_args[0] = MSG_ABORT_TAG; break; case MPT_CLEAR_TASK_SET: inot->message_args[0] = MSG_CLEAR_TASK_SET; break; case MPT_TARGET_RESET: inot->message_args[0] = MSG_TARGET_RESET; break; case MPT_CLEAR_ACA: inot->message_args[0] = MSG_CLEAR_ACA; break; case MPT_TERMINATE_TASK: inot->message_args[0] = MSG_ABORT_TAG; break; default: inot->message_args[0] = MSG_NOOP; break; } tgt->ccb = (union ccb *) inot; inot->ccb_h.status = CAM_MESSAGE_RECV|CAM_DEV_QFRZN; MPTLOCK_2_CAMLOCK(mpt); xpt_done((union ccb *)inot); CAMLOCK_2_MPTLOCK(mpt); } static void mpt_scsi_tgt_atio(struct mpt_softc *mpt, request_t *req, uint32_t reply_desc) { struct ccb_accept_tio *atiop; lun_id_t lun; int tag_action = 0; mpt_tgt_state_t *tgt; tgt_resource_t *trtp; U8 *lunptr; U8 *vbuf; U16 itag; U16 ioindex; mpt_task_mgmt_t fct = MPT_NIL_TMT_VALUE; uint8_t *cdbp; /* * First, DMA sync the received command- which is in the *request* * phys area. * XXX: We could optimize this for a range */ bus_dmamap_sync(mpt->request_dmat, mpt->request_dmap, BUS_DMASYNC_POSTREAD); /* * Stash info for the current command where we can get at it later. */ vbuf = req->req_vbuf; vbuf += MPT_RQSL(mpt); /* * Get our state pointer set up. */ tgt = MPT_TGT_STATE(mpt, req); if (tgt->state != TGT_STATE_LOADED) { mpt_tgt_dump_req_state(mpt, req); panic("bad target state in mpt_scsi_tgt_atio"); } memset(tgt, 0, sizeof (mpt_tgt_state_t)); tgt->state = TGT_STATE_IN_CAM; tgt->reply_desc = reply_desc; ioindex = GET_IO_INDEX(reply_desc); if (mpt->is_fc) { PTR_MPI_TARGET_FCP_CMD_BUFFER fc; fc = (PTR_MPI_TARGET_FCP_CMD_BUFFER) vbuf; if (fc->FcpCntl[2]) { /* * Task Management Request */ switch (fc->FcpCntl[2]) { case 0x2: fct = MPT_ABORT_TASK_SET; break; case 0x4: fct = MPT_CLEAR_TASK_SET; break; case 0x20: fct = MPT_TARGET_RESET; break; case 0x40: fct = MPT_CLEAR_ACA; break; case 0x80: fct = MPT_TERMINATE_TASK; break; default: mpt_prt(mpt, "CORRUPTED TASK MGMT BITS: 0x%x\n", fc->FcpCntl[2]); mpt_scsi_tgt_status(mpt, 0, req, SCSI_STATUS_OK, 0); return; } return; } switch (fc->FcpCntl[1]) { case 0: tag_action = MSG_SIMPLE_Q_TAG; break; case 1: tag_action = MSG_HEAD_OF_Q_TAG; break; case 2: tag_action = MSG_ORDERED_Q_TAG; break; default: /* * Bah. Ignore Untagged Queing and ACA */ tag_action = MSG_SIMPLE_Q_TAG; break; } tgt->resid = be32toh(fc->FcpDl); cdbp = fc->FcpCdb; lunptr = fc->FcpLun; itag = be16toh(fc->OptionalOxid); } else if (mpt->is_sas) { PTR_MPI_TARGET_SSP_CMD_BUFFER ssp; ssp = (PTR_MPI_TARGET_SSP_CMD_BUFFER) vbuf; cdbp = ssp->CDB; lunptr = ssp->LogicalUnitNumber; itag = ssp->InitiatorTag; } else { PTR_MPI_TARGET_SCSI_SPI_CMD_BUFFER sp; sp = (PTR_MPI_TARGET_SCSI_SPI_CMD_BUFFER) vbuf; cdbp = sp->CDB; lunptr = sp->LogicalUnitNumber; itag = sp->Tag; } /* * Generate a simple lun */ switch (lunptr[0] & 0xc0) { case 0x40: lun = ((lunptr[0] & 0x3f) << 8) | lunptr[1]; break; case 0: lun = lunptr[1]; break; default: mpt_lprt(mpt, MPT_PRT_ERROR, "cannot handle this type lun\n"); lun = 0xffff; break; } /* * Deal with non-enabled or bad luns here. */ if (lun >= MPT_MAX_LUNS || mpt->tenabled == 0 || mpt->trt[lun].enabled == 0) { if (mpt->twildcard) { trtp = &mpt->trt_wildcard; } else { const uint8_t sp[MPT_SENSE_SIZE] = { 0xf0, 0, 0x5, 0, 0, 0, 0, 8, 0, 0, 0, 0, 0x25 }; mpt_scsi_tgt_status(mpt, NULL, req, SCSI_STATUS_CHECK_COND, sp); return; } } else { trtp = &mpt->trt[lun]; } if (fct != MPT_NIL_TMT_VALUE) { /* undo any tgt residual settings */ tgt->resid = 0; mpt_scsi_tgt_tsk_mgmt(mpt, req, fct, trtp, GET_INITIATOR_INDEX(reply_desc)); return; } atiop = (struct ccb_accept_tio *) STAILQ_FIRST(&trtp->atios); if (atiop == NULL) { mpt_lprt(mpt, MPT_PRT_WARN, "no ATIOs for lun %u- sending back %s\n", lun, mpt->tenabled? "QUEUE FULL" : "BUSY"); mpt_scsi_tgt_status(mpt, NULL, req, mpt->tenabled? SCSI_STATUS_QUEUE_FULL : SCSI_STATUS_BUSY, NULL); return; } STAILQ_REMOVE_HEAD(&trtp->atios, sim_links.stqe); mpt_lprt(mpt, MPT_PRT_DEBUG1, "Get FREE ATIO %p lun %d\n", atiop, atiop->ccb_h.target_lun); atiop->ccb_h.ccb_mpt_ptr = mpt; atiop->ccb_h.status = CAM_CDB_RECVD; atiop->ccb_h.target_lun = lun; atiop->sense_len = 0; atiop->init_id = GET_INITIATOR_INDEX(reply_desc); atiop->cdb_len = mpt_cdblen(cdbp[0], 16); memcpy(atiop->cdb_io.cdb_bytes, cdbp, atiop->cdb_len); /* * The tag we construct here allows us to find the * original request that the command came in with. * * This way we don't have to depend on anything but the * tag to find things when CCBs show back up from CAM. */ atiop->tag_id = MPT_MAKE_TAGID(mpt, req, ioindex); tgt->tag_id = atiop->tag_id; if (tag_action) { atiop->tag_action = tag_action; atiop->ccb_h.flags = CAM_TAG_ACTION_VALID; } if (mpt->verbose >= MPT_PRT_DEBUG) { int i; mpt_prt(mpt, "START_CCB %p for lun %u CDB=<", atiop, atiop->ccb_h.target_lun); for (i = 0; i < atiop->cdb_len; i++) { mpt_prtc(mpt, "%02x%c", cdbp[i] & 0xff, (i == (atiop->cdb_len - 1))? '>' : ' '); } mpt_prtc(mpt, " itag %x tag %x rdesc %x dl=%u\n", itag, atiop->tag_id, tgt->reply_desc, tgt->resid); } tgt->ccb = (union ccb *) atiop; MPTLOCK_2_CAMLOCK(mpt); xpt_done((union ccb *)atiop); CAMLOCK_2_MPTLOCK(mpt); } static void mpt_tgt_dump_tgt_state(struct mpt_softc *mpt, request_t *req) { mpt_tgt_state_t *tgt = MPT_TGT_STATE(mpt, req); mpt_prt(mpt, "req %p:%u tgt:rdesc 0x%x resid %u xfrd %u ccb %p treq %p " "nx %d tag %08x state=%d\n", req, req->serno, tgt->reply_desc, tgt->resid, tgt->bytes_xfered, tgt->ccb, tgt->req, tgt->nxfers, tgt->tag_id, tgt->state); } static void mpt_tgt_dump_req_state(struct mpt_softc *mpt, request_t *req) { mpt_prt(mpt, "req %p:%u index %u (%x) state %x\n", req, req->serno, req->index, req->index, req->state); mpt_tgt_dump_tgt_state(mpt, req); } static int mpt_scsi_tgt_reply_handler(struct mpt_softc *mpt, request_t *req, uint32_t reply_desc, MSG_DEFAULT_REPLY *reply_frame) { int dbg; union ccb *ccb; U16 status; if (reply_frame == NULL) { /* * Figure out if this is a new command or a target assist * completing. */ mpt_tgt_state_t *tgt = MPT_TGT_STATE(mpt, req); char serno[8]; if (tgt->req) { snprintf(serno, 8, "%u", tgt->req->serno); } else { strncpy(serno, "??", 8); } switch(tgt->state) { case TGT_STATE_LOADED: mpt_scsi_tgt_atio(mpt, req, reply_desc); break; case TGT_STATE_MOVING_DATA: { uint8_t *sp = NULL, sense[MPT_SENSE_SIZE]; ccb = tgt->ccb; tgt->ccb = NULL; tgt->nxfers++; untimeout(mpt_timeout, ccb, ccb->ccb_h.timeout_ch); mpt_lprt(mpt, MPT_PRT_DEBUG, "TARGET_ASSIST %p (req %p:%s) done tag 0x%x\n", ccb, tgt->req, serno, ccb->csio.tag_id); /* * Free the Target Assist Request */ KASSERT(tgt->req && tgt->req->ccb == ccb, ("tgt->req %p:%s tgt->req->ccb %p", tgt->req, serno, tgt->req? tgt->req->ccb : NULL)); mpt_free_request(mpt, tgt->req); tgt->req = NULL; /* * Do we need to send status now? That is, are * we done with all our data transfers? */ if ((ccb->ccb_h.flags & CAM_SEND_STATUS) == 0) { mpt_set_ccb_status(ccb, CAM_REQ_CMP); ccb->ccb_h.status &= ~CAM_SIM_QUEUED; KASSERT(ccb->ccb_h.status, ("zero ccb sts at %d\n", __LINE__)); tgt->state = TGT_STATE_IN_CAM; if (mpt->outofbeer) { ccb->ccb_h.status |= CAM_RELEASE_SIMQ; mpt->outofbeer = 0; mpt_lprt(mpt, MPT_PRT_DEBUG, "THAWQ\n"); } MPTLOCK_2_CAMLOCK(mpt); xpt_done(ccb); CAMLOCK_2_MPTLOCK(mpt); break; } if (ccb->ccb_h.flags & CAM_SEND_SENSE) { sp = sense; memcpy(sp, &ccb->csio.sense_data, min(ccb->csio.sense_len, MPT_SENSE_SIZE)); } mpt_scsi_tgt_status(mpt, ccb, req, ccb->csio.scsi_status, sp); break; } case TGT_STATE_SENDING_STATUS: case TGT_STATE_MOVING_DATA_AND_STATUS: { int ioindex; ccb = tgt->ccb; if (ccb) { tgt->ccb = NULL; tgt->nxfers++; untimeout(mpt_timeout, ccb, ccb->ccb_h.timeout_ch); if (ccb->ccb_h.flags & CAM_SEND_SENSE) { ccb->ccb_h.status |= CAM_SENT_SENSE; } mpt_lprt(mpt, MPT_PRT_DEBUG, "TARGET_STATUS tag %x sts %x flgs %x req " "%p\n", ccb->csio.tag_id, ccb->ccb_h.status, ccb->ccb_h.flags, tgt->req); /* * Free the Target Send Status Request */ KASSERT(tgt->req && tgt->req->ccb == ccb, ("tgt->req %p:%s tgt->req->ccb %p", tgt->req, serno, tgt->req? tgt->req->ccb : NULL)); /* * Notify CAM that we're done */ mpt_set_ccb_status(ccb, CAM_REQ_CMP); ccb->ccb_h.status &= ~CAM_SIM_QUEUED; KASSERT(ccb->ccb_h.status, ("ZERO ccb sts at %d\n", __LINE__)); tgt->ccb = NULL; } else { mpt_lprt(mpt, MPT_PRT_DEBUG, "TARGET_STATUS non-CAM for req %p:%s\n", tgt->req, serno); } mpt_free_request(mpt, tgt->req); tgt->req = NULL; /* * And re-post the Command Buffer. */ ioindex = GET_IO_INDEX(reply_desc); mpt_post_target_command(mpt, req, ioindex); /* * And post a done for anyone who cares */ if (ccb) { if (mpt->outofbeer) { ccb->ccb_h.status |= CAM_RELEASE_SIMQ; mpt->outofbeer = 0; mpt_lprt(mpt, MPT_PRT_DEBUG, "THAWQ\n"); } MPTLOCK_2_CAMLOCK(mpt); xpt_done(ccb); CAMLOCK_2_MPTLOCK(mpt); } break; } case TGT_STATE_NIL: /* XXX This Never Happens XXX */ tgt->state = TGT_STATE_LOADED; break; default: mpt_prt(mpt, "Unknown Target State 0x%x in Context " "Reply Function\n", tgt->state); } return (TRUE); } status = le16toh(reply_frame->IOCStatus); if (status != MPI_IOCSTATUS_SUCCESS) { dbg = MPT_PRT_ERROR; } else { dbg = MPT_PRT_DEBUG1; } mpt_lprt(mpt, dbg, "SCSI_TGT REPLY: req=%p:%u reply=%p func=%x IOCstatus 0x%x\n", req, req->serno, reply_frame, reply_frame->Function, status); switch (reply_frame->Function) { case MPI_FUNCTION_TARGET_CMD_BUFFER_POST: { mpt_tgt_state_t *tgt = MPT_TGT_STATE(mpt, req); KASSERT(tgt->state == TGT_STATE_LOADING, ("bad state 0%x on reply to buffer post\n", tgt->state)); if ((req->serno = mpt->sequence++) == 0) { req->serno = mpt->sequence++; } tgt->state = TGT_STATE_LOADED; break; } case MPI_FUNCTION_TARGET_ASSIST: mpt_free_request(mpt, req); break; case MPI_FUNCTION_TARGET_STATUS_SEND: mpt_free_request(mpt, req); break; case MPI_FUNCTION_TARGET_MODE_ABORT: { PTR_MSG_TARGET_MODE_ABORT_REPLY abtrp = (PTR_MSG_TARGET_MODE_ABORT_REPLY) reply_frame; PTR_MSG_TARGET_MODE_ABORT abtp = (PTR_MSG_TARGET_MODE_ABORT) req->req_vbuf; uint32_t cc = GET_IO_INDEX(le32toh(abtp->ReplyWord)); mpt_prt(mpt, "ABORT RX_ID 0x%x Complete; status 0x%x cnt %u\n", cc, le16toh(abtrp->IOCStatus), le32toh(abtrp->AbortCount)); mpt_free_request(mpt, req); break; } default: mpt_prt(mpt, "Unknown Target Address Reply Function code: " "0x%x\n", reply_frame->Function); break; } return (TRUE); }