/*- * SPDX-License-Identifier: BSD-2-Clause-FreeBSD * * Copyright (c) 2011-2015 LSI Corp. * Copyright (c) 2013-2015 Avago Technologies * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD */ #include __FBSDID("$FreeBSD$"); /* TODO Move headers to mpsvar */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /** * mps_config_get_ioc_pg8 - obtain ioc page 8 * @sc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Returns 0 for success, non-zero for failure. */ int mps_config_get_ioc_pg8(struct mps_softc *sc, Mpi2ConfigReply_t *mpi_reply, Mpi2IOCPage8_t *config_page) { MPI2_CONFIG_REQUEST *request; MPI2_CONFIG_REPLY *reply = NULL; struct mps_command *cm; MPI2_CONFIG_PAGE_IOC_8 *page = NULL; int error = 0; u16 ioc_status; mps_dprint(sc, MPS_TRACE, "%s\n", __func__); if ((cm = mps_alloc_command(sc)) == NULL) { printf("%s: command alloc failed @ line %d\n", __func__, __LINE__); error = EBUSY; goto out; } request = (MPI2_CONFIG_REQUEST *)cm->cm_req; bzero(request, sizeof(MPI2_CONFIG_REQUEST)); request->Function = MPI2_FUNCTION_CONFIG; request->Action = MPI2_CONFIG_ACTION_PAGE_HEADER; request->Header.PageType = MPI2_CONFIG_PAGETYPE_IOC; request->Header.PageNumber = 8; request->Header.PageVersion = MPI2_IOCPAGE8_PAGEVERSION; cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; cm->cm_data = NULL; error = mps_wait_command(sc, &cm, 60, CAN_SLEEP); if (cm != NULL) reply = (MPI2_CONFIG_REPLY *)cm->cm_reply; if (error || (reply == NULL)) { /* FIXME */ /* * If the request returns an error then we need to do a diag * reset */ printf("%s: request for header completed with error %d\n", __func__, error); error = ENXIO; goto out; } ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK; bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY)); if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { /* FIXME */ /* * If the request returns an error then we need to do a diag * reset */ printf("%s: header read with error; iocstatus = 0x%x\n", __func__, ioc_status); error = ENXIO; goto out; } /* We have to do free and alloc for the reply-free and reply-post * counters to match - Need to review the reply FIFO handling. */ mps_free_command(sc, cm); if ((cm = mps_alloc_command(sc)) == NULL) { printf("%s: command alloc failed @ line %d\n", __func__, __LINE__); error = EBUSY; goto out; } request = (MPI2_CONFIG_REQUEST *)cm->cm_req; bzero(request, sizeof(MPI2_CONFIG_REQUEST)); request->Function = MPI2_FUNCTION_CONFIG; request->Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; request->Header.PageType = MPI2_CONFIG_PAGETYPE_IOC; request->Header.PageNumber = 8; request->Header.PageVersion = MPI2_IOCPAGE8_PAGEVERSION; request->Header.PageLength = mpi_reply->Header.PageLength; cm->cm_length = le16toh(mpi_reply->Header.PageLength) * 4; cm->cm_sge = &request->PageBufferSGE; cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION); cm->cm_flags = MPS_CM_FLAGS_SGE_SIMPLE | MPS_CM_FLAGS_DATAIN; cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; page = malloc((cm->cm_length), M_MPT2, M_ZERO | M_NOWAIT); if (!page) { printf("%s: page alloc failed\n", __func__); error = ENOMEM; goto out; } cm->cm_data = page; error = mps_wait_command(sc, &cm, 60, CAN_SLEEP); if (cm != NULL) reply = (MPI2_CONFIG_REPLY *)cm->cm_reply; if (error || (reply == NULL)) { /* FIXME */ /* * If the request returns an error then we need to do a diag * reset */ printf("%s: request for page completed with error %d\n", __func__, error); error = ENXIO; goto out; } ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK; bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY)); if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { /* FIXME */ /* * If the request returns an error then we need to do a diag * reset */ printf("%s: page read with error; iocstatus = 0x%x\n", __func__, ioc_status); error = ENXIO; goto out; } bcopy(page, config_page, MIN(cm->cm_length, (sizeof(Mpi2IOCPage8_t)))); out: free(page, M_MPT2); if (cm) mps_free_command(sc, cm); return (error); } /** * mps_config_get_man_pg10 - obtain Manufacturing Page 10 data and set flags * accordingly. Currently, this page does not need to return to caller. * @sc: per adapter object * @mpi_reply: reply mf payload returned from firmware * Context: sleep. * * Returns 0 for success, non-zero for failure. */ int mps_config_get_man_pg10(struct mps_softc *sc, Mpi2ConfigReply_t *mpi_reply) { MPI2_CONFIG_REQUEST *request; MPI2_CONFIG_REPLY *reply = NULL; struct mps_command *cm; pMpi2ManufacturingPagePS_t page = NULL; uint32_t *pPS_info; uint8_t OEM_Value = 0; int error = 0; u16 ioc_status; mps_dprint(sc, MPS_TRACE, "%s\n", __func__); if ((cm = mps_alloc_command(sc)) == NULL) { printf("%s: command alloc failed @ line %d\n", __func__, __LINE__); error = EBUSY; goto out; } request = (MPI2_CONFIG_REQUEST *)cm->cm_req; bzero(request, sizeof(MPI2_CONFIG_REQUEST)); request->Function = MPI2_FUNCTION_CONFIG; request->Action = MPI2_CONFIG_ACTION_PAGE_HEADER; request->Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING; request->Header.PageNumber = 10; request->Header.PageVersion = MPI2_MANUFACTURING10_PAGEVERSION; cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; cm->cm_data = NULL; /* * This page must be polled because the IOC isn't ready yet when this * page is needed. */ error = mps_wait_command(sc, &cm, 60, 0); if (cm != NULL) reply = (MPI2_CONFIG_REPLY *)cm->cm_reply; if (error || (reply == NULL)) { /* FIXME */ /* If the poll returns error then we need to do diag reset */ printf("%s: poll for header completed with error %d\n", __func__, error); error = ENXIO; goto out; } ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK; bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY)); if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { /* FIXME */ /* If the poll returns error then we need to do diag reset */ printf("%s: header read with error; iocstatus = 0x%x\n", __func__, ioc_status); error = ENXIO; goto out; } /* We have to do free and alloc for the reply-free and reply-post * counters to match - Need to review the reply FIFO handling. */ mps_free_command(sc, cm); if ((cm = mps_alloc_command(sc)) == NULL) { printf("%s: command alloc failed @ line %d\n", __func__, __LINE__); error = EBUSY; goto out; } request = (MPI2_CONFIG_REQUEST *)cm->cm_req; bzero(request, sizeof(MPI2_CONFIG_REQUEST)); request->Function = MPI2_FUNCTION_CONFIG; request->Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; request->Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING; request->Header.PageNumber = 10; request->Header.PageVersion = MPI2_MANUFACTURING10_PAGEVERSION; request->Header.PageLength = mpi_reply->Header.PageLength; cm->cm_length = le16toh(mpi_reply->Header.PageLength) * 4; cm->cm_sge = &request->PageBufferSGE; cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION); cm->cm_flags = MPS_CM_FLAGS_SGE_SIMPLE | MPS_CM_FLAGS_DATAIN; cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; page = malloc(MPS_MAN_PAGE10_SIZE, M_MPT2, M_ZERO | M_NOWAIT); if (!page) { printf("%s: page alloc failed\n", __func__); error = ENOMEM; goto out; } cm->cm_data = page; /* * This page must be polled because the IOC isn't ready yet when this * page is needed. */ error = mps_wait_command(sc, &cm, 60, 0); if (cm != NULL) reply = (MPI2_CONFIG_REPLY *)cm->cm_reply; if (error || (reply == NULL)) { /* FIXME */ /* If the poll returns error then we need to do diag reset */ printf("%s: poll for page completed with error %d\n", __func__, error); error = ENXIO; goto out; } ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK; bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY)); if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { /* FIXME */ /* If the poll returns error then we need to do diag reset */ printf("%s: page read with error; iocstatus = 0x%x\n", __func__, ioc_status); error = ENXIO; goto out; } /* * If OEM ID is unknown, fail the request. */ sc->WD_hide_expose = MPS_WD_HIDE_ALWAYS; OEM_Value = (uint8_t)(page->ProductSpecificInfo & 0x000000FF); if (OEM_Value != MPS_WD_LSI_OEM) { mps_dprint(sc, MPS_FAULT, "Unknown OEM value for WarpDrive " "(0x%x)\n", OEM_Value); error = ENXIO; goto out; } /* * Set the phys disks hide/expose value. */ pPS_info = &page->ProductSpecificInfo; sc->WD_hide_expose = (uint8_t)(pPS_info[5]); sc->WD_hide_expose &= MPS_WD_HIDE_EXPOSE_MASK; if ((sc->WD_hide_expose != MPS_WD_HIDE_ALWAYS) && (sc->WD_hide_expose != MPS_WD_EXPOSE_ALWAYS) && (sc->WD_hide_expose != MPS_WD_HIDE_IF_VOLUME)) { mps_dprint(sc, MPS_FAULT, "Unknown value for WarpDrive " "hide/expose: 0x%x\n", sc->WD_hide_expose); error = ENXIO; goto out; } out: free(page, M_MPT2); if (cm) mps_free_command(sc, cm); return (error); } /** * mps_base_static_config_pages - static start of day config pages. * @sc: per adapter object * * Return nothing. */ void mps_base_static_config_pages(struct mps_softc *sc) { Mpi2ConfigReply_t mpi_reply; int retry; retry = 0; while (mps_config_get_ioc_pg8(sc, &mpi_reply, &sc->ioc_pg8)) { retry++; if (retry > 5) { /* We need to Handle this situation */ /*FIXME*/ break; } } } /** * mps_wd_config_pages - get info required to support WarpDrive. This needs to * be called after discovery is complete to guarantee that IR info is there. * @sc: per adapter object * * Return nothing. */ void mps_wd_config_pages(struct mps_softc *sc) { Mpi2ConfigReply_t mpi_reply; pMpi2RaidVolPage0_t raid_vol_pg0 = NULL; Mpi2RaidPhysDiskPage0_t phys_disk_pg0; pMpi2RaidVol0PhysDisk_t pRVPD; uint32_t stripe_size, phys_disk_page_address; uint16_t block_size; uint8_t index, stripe_exp = 0, block_exp = 0; /* * Get the WD settings from manufacturing page 10 if using a WD HBA. * This will be used to determine if phys disks should always be * hidden, hidden only if part of a WD volume, or never hidden. Also, * get the WD RAID Volume info and fail if volume does not exist or if * volume does not meet the requirements for a WD volume. No retry * here. Just default to HIDE ALWAYS if man Page10 fails, or clear WD * Valid flag if Volume info fails. */ sc->WD_valid_config = FALSE; if (sc->mps_flags & MPS_FLAGS_WD_AVAILABLE) { if (mps_config_get_man_pg10(sc, &mpi_reply)) { mps_dprint(sc, MPS_FAULT, "mps_config_get_man_pg10 failed! Using 0 (Hide " "Always) for WarpDrive hide/expose value.\n"); sc->WD_hide_expose = MPS_WD_HIDE_ALWAYS; } /* * Get first RAID Volume Page0 using GET_NEXT_HANDLE. */ raid_vol_pg0 = malloc(sizeof(Mpi2RaidVolPage0_t) + (sizeof(Mpi2RaidVol0PhysDisk_t) * MPS_MAX_DISKS_IN_VOL), M_MPT2, M_ZERO | M_NOWAIT); if (!raid_vol_pg0) { printf("%s: page alloc failed\n", __func__); goto out; } if (mps_config_get_raid_volume_pg0(sc, &mpi_reply, raid_vol_pg0, 0x0000FFFF)) { mps_dprint(sc, MPS_INFO, "mps_config_get_raid_volume_pg0 failed! Assuming " "WarpDrive IT mode.\n"); goto out; } /* * Check for valid WD configuration: * volume type is RAID0 * number of phys disks in the volume is no more than 8 */ if ((raid_vol_pg0->VolumeType != MPI2_RAID_VOL_TYPE_RAID0) || (raid_vol_pg0->NumPhysDisks > 8)) { mps_dprint(sc, MPS_FAULT, "Invalid WarpDrive configuration. Direct Drive I/O " "will not be used.\n"); goto out; } /* * Save the WD RAID data to be used during WD I/O. */ sc->DD_max_lba = le64toh((uint64_t)raid_vol_pg0->MaxLBA.High << 32 | (uint64_t)raid_vol_pg0->MaxLBA.Low); sc->DD_num_phys_disks = raid_vol_pg0->NumPhysDisks; sc->DD_dev_handle = raid_vol_pg0->DevHandle; sc->DD_stripe_size = raid_vol_pg0->StripeSize; sc->DD_block_size = raid_vol_pg0->BlockSize; /* * Find power of 2 of stripe size and set this as the exponent. * Fail if stripe size is 0. */ stripe_size = raid_vol_pg0->StripeSize; for (index = 0; index < 32; index++) { if (stripe_size & 1) break; stripe_exp++; stripe_size >>= 1; } if (index == 32) { mps_dprint(sc, MPS_FAULT, "RAID Volume's stripe size is 0. Direct Drive I/O " "will not be used.\n"); goto out; } sc->DD_stripe_exponent = stripe_exp; /* * Find power of 2 of block size and set this as the exponent. * Fail if block size is 0. */ block_size = raid_vol_pg0->BlockSize; for (index = 0; index < 16; index++) { if (block_size & 1) break; block_exp++; block_size >>= 1; } if (index == 16) { mps_dprint(sc, MPS_FAULT, "RAID Volume's block size is 0. Direct Drive I/O " "will not be used.\n"); goto out; } sc->DD_block_exponent = block_exp; /* * Loop through all of the volume's Phys Disks to map the phys * disk number into the columm map. This is used during Direct * Drive I/O to send the request to the correct SSD. */ pRVPD = (pMpi2RaidVol0PhysDisk_t)&raid_vol_pg0->PhysDisk; for (index = 0; index < raid_vol_pg0->NumPhysDisks; index++) { sc->DD_column_map[pRVPD->PhysDiskMap].phys_disk_num = pRVPD->PhysDiskNum; pRVPD++; } /* * Get second RAID Volume Page0 using previous handle. This * page should not exist. If it does, must not proceed with WD * handling. */ if (mps_config_get_raid_volume_pg0(sc, &mpi_reply, raid_vol_pg0, (u32)raid_vol_pg0->DevHandle)) { if ((le16toh(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK) != MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) { mps_dprint(sc, MPS_FAULT, "Multiple RAID Volume Page0! Direct Drive " "I/O will not be used.\n"); goto out; } } else { mps_dprint(sc, MPS_FAULT, "Multiple volumes! Direct Drive I/O will not be " "used.\n"); goto out; } /* * Get RAID Volume Phys Disk Page 0 for all SSDs in the volume. */ for (index = 0; index < raid_vol_pg0->NumPhysDisks; index++) { phys_disk_page_address = MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM + sc->DD_column_map[index].phys_disk_num; if (mps_config_get_raid_pd_pg0(sc, &mpi_reply, &phys_disk_pg0, phys_disk_page_address)) { mps_dprint(sc, MPS_FAULT, "mps_config_get_raid_pd_pg0 failed! Direct " "Drive I/O will not be used.\n"); goto out; } if (phys_disk_pg0.DevHandle == 0xFFFF) { mps_dprint(sc, MPS_FAULT, "Invalid Phys Disk DevHandle! Direct Drive " "I/O will not be used.\n"); goto out; } sc->DD_column_map[index].dev_handle = phys_disk_pg0.DevHandle; } sc->WD_valid_config = TRUE; out: if (raid_vol_pg0) free(raid_vol_pg0, M_MPT2); } } /** * mps_config_get_dpm_pg0 - obtain driver persistent mapping page0 * @sc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @sz: size of buffer passed in config_page * Context: sleep. * * Returns 0 for success, non-zero for failure. */ int mps_config_get_dpm_pg0(struct mps_softc *sc, Mpi2ConfigReply_t *mpi_reply, Mpi2DriverMappingPage0_t *config_page, u16 sz) { MPI2_CONFIG_REQUEST *request; MPI2_CONFIG_REPLY *reply = NULL; struct mps_command *cm; Mpi2DriverMappingPage0_t *page = NULL; int error = 0; u16 ioc_status; mps_dprint(sc, MPS_TRACE, "%s\n", __func__); memset(config_page, 0, sz); if ((cm = mps_alloc_command(sc)) == NULL) { printf("%s: command alloc failed @ line %d\n", __func__, __LINE__); error = EBUSY; goto out; } request = (MPI2_CONFIG_REQUEST *)cm->cm_req; bzero(request, sizeof(MPI2_CONFIG_REQUEST)); request->Function = MPI2_FUNCTION_CONFIG; request->Action = MPI2_CONFIG_ACTION_PAGE_HEADER; request->Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; request->ExtPageType = MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING; request->Header.PageNumber = 0; request->Header.PageVersion = MPI2_DRIVERMAPPING0_PAGEVERSION; request->PageAddress = sc->max_dpm_entries << MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT; cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; cm->cm_data = NULL; error = mps_wait_command(sc, &cm, 60, CAN_SLEEP); if (cm != NULL) reply = (MPI2_CONFIG_REPLY *)cm->cm_reply; if (error || (reply == NULL)) { /* FIXME */ /* * If the request returns an error then we need to do a diag * reset */ printf("%s: request for header completed with error %d\n", __func__, error); error = ENXIO; goto out; } ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK; bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY)); if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { /* FIXME */ /* * If the request returns an error then we need to do a diag * reset */ printf("%s: header read with error; iocstatus = 0x%x\n", __func__, ioc_status); error = ENXIO; goto out; } /* We have to do free and alloc for the reply-free and reply-post * counters to match - Need to review the reply FIFO handling. */ mps_free_command(sc, cm); if ((cm = mps_alloc_command(sc)) == NULL) { printf("%s: command alloc failed @ line %d\n", __func__, __LINE__); error = EBUSY; goto out; } request = (MPI2_CONFIG_REQUEST *)cm->cm_req; bzero(request, sizeof(MPI2_CONFIG_REQUEST)); request->Function = MPI2_FUNCTION_CONFIG; request->Action = MPI2_CONFIG_ACTION_PAGE_READ_NVRAM; request->Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; request->ExtPageType = MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING; request->Header.PageNumber = 0; request->Header.PageVersion = MPI2_DRIVERMAPPING0_PAGEVERSION; request->PageAddress = sc->max_dpm_entries << MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT; request->ExtPageLength = mpi_reply->ExtPageLength; cm->cm_length = le16toh(request->ExtPageLength) * 4; cm->cm_sge = &request->PageBufferSGE; cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION); cm->cm_flags = MPS_CM_FLAGS_SGE_SIMPLE | MPS_CM_FLAGS_DATAIN; cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; page = malloc(cm->cm_length, M_MPT2, M_ZERO|M_NOWAIT); if (!page) { printf("%s: page alloc failed\n", __func__); error = ENOMEM; goto out; } cm->cm_data = page; error = mps_wait_command(sc, &cm, 60, CAN_SLEEP); if (cm != NULL) reply = (MPI2_CONFIG_REPLY *)cm->cm_reply; if (error || (reply == NULL)) { /* FIXME */ /* * If the request returns an error then we need to do a diag * reset */ printf("%s: request for page completed with error %d\n", __func__, error); error = ENXIO; goto out; } ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK; bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY)); if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { /* FIXME */ /* * If the request returns an error then we need to do a diag * reset */ printf("%s: page read with error; iocstatus = 0x%x\n", __func__, ioc_status); error = ENXIO; goto out; } bcopy(page, config_page, MIN(cm->cm_length, sz)); out: free(page, M_MPT2); if (cm) mps_free_command(sc, cm); return (error); } /** * mps_config_set_dpm_pg0 - write an entry in driver persistent mapping page0 * @sc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @entry_idx: entry index in DPM Page0 to be modified * Context: sleep. * * Returns 0 for success, non-zero for failure. */ int mps_config_set_dpm_pg0(struct mps_softc *sc, Mpi2ConfigReply_t *mpi_reply, Mpi2DriverMappingPage0_t *config_page, u16 entry_idx) { MPI2_CONFIG_REQUEST *request; MPI2_CONFIG_REPLY *reply = NULL; struct mps_command *cm; MPI2_CONFIG_PAGE_DRIVER_MAPPING_0 *page = NULL; int error = 0; u16 ioc_status; mps_dprint(sc, MPS_TRACE, "%s\n", __func__); if ((cm = mps_alloc_command(sc)) == NULL) { printf("%s: command alloc failed @ line %d\n", __func__, __LINE__); error = EBUSY; goto out; } request = (MPI2_CONFIG_REQUEST *)cm->cm_req; bzero(request, sizeof(MPI2_CONFIG_REQUEST)); request->Function = MPI2_FUNCTION_CONFIG; request->Action = MPI2_CONFIG_ACTION_PAGE_HEADER; request->Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; request->ExtPageType = MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING; request->Header.PageNumber = 0; request->Header.PageVersion = MPI2_DRIVERMAPPING0_PAGEVERSION; /* We can remove below two lines ????*/ request->PageAddress = 1 << MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT; request->PageAddress |= htole16(entry_idx); cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; cm->cm_data = NULL; error = mps_wait_command(sc, &cm, 60, CAN_SLEEP); if (cm != NULL) reply = (MPI2_CONFIG_REPLY *)cm->cm_reply; if (error || (reply == NULL)) { /* FIXME */ /* * If the request returns an error then we need to do a diag * reset */ printf("%s: request for header completed with error %d\n", __func__, error); error = ENXIO; goto out; } ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK; bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY)); if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { /* FIXME */ /* * If the request returns an error then we need to do a diag * reset */ printf("%s: header read with error; iocstatus = 0x%x\n", __func__, ioc_status); error = ENXIO; goto out; } /* We have to do free and alloc for the reply-free and reply-post * counters to match - Need to review the reply FIFO handling. */ mps_free_command(sc, cm); if ((cm = mps_alloc_command(sc)) == NULL) { printf("%s: command alloc failed @ line %d\n", __func__, __LINE__); error = EBUSY; goto out; } request = (MPI2_CONFIG_REQUEST *)cm->cm_req; bzero(request, sizeof(MPI2_CONFIG_REQUEST)); request->Function = MPI2_FUNCTION_CONFIG; request->Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM; request->Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; request->ExtPageType = MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING; request->Header.PageNumber = 0; request->Header.PageVersion = MPI2_DRIVERMAPPING0_PAGEVERSION; request->ExtPageLength = mpi_reply->ExtPageLength; request->PageAddress = 1 << MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT; request->PageAddress |= htole16(entry_idx); cm->cm_length = le16toh(mpi_reply->ExtPageLength) * 4; cm->cm_sge = &request->PageBufferSGE; cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION); cm->cm_flags = MPS_CM_FLAGS_SGE_SIMPLE | MPS_CM_FLAGS_DATAOUT; cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; page = malloc(cm->cm_length, M_MPT2, M_ZERO | M_NOWAIT); if (!page) { printf("%s: page alloc failed\n", __func__); error = ENOMEM; goto out; } bcopy(config_page, page, MIN(cm->cm_length, (sizeof(Mpi2DriverMappingPage0_t)))); cm->cm_data = page; error = mps_wait_command(sc, &cm, 60, CAN_SLEEP); if (cm != NULL) reply = (MPI2_CONFIG_REPLY *)cm->cm_reply; if (error || (reply == NULL)) { /* FIXME */ /* * If the request returns an error then we need to do a diag * reset */ printf("%s: request to write page completed with error %d\n", __func__, error); error = ENXIO; goto out; } ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK; bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY)); if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { /* FIXME */ /* * If the request returns an error then we need to do a diag * reset */ printf("%s: page written with error; iocstatus = 0x%x\n", __func__, ioc_status); error = ENXIO; goto out; } out: free(page, M_MPT2); if (cm) mps_free_command(sc, cm); return (error); } /** * mps_config_get_sas_device_pg0 - obtain sas device page 0 * @sc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @form: GET_NEXT_HANDLE or HANDLE * @handle: device handle * Context: sleep. * * Returns 0 for success, non-zero for failure. */ int mps_config_get_sas_device_pg0(struct mps_softc *sc, Mpi2ConfigReply_t *mpi_reply, Mpi2SasDevicePage0_t *config_page, u32 form, u16 handle) { MPI2_CONFIG_REQUEST *request; MPI2_CONFIG_REPLY *reply = NULL; struct mps_command *cm; Mpi2SasDevicePage0_t *page = NULL; int error = 0; u16 ioc_status; mps_dprint(sc, MPS_TRACE, "%s\n", __func__); if ((cm = mps_alloc_command(sc)) == NULL) { printf("%s: command alloc failed @ line %d\n", __func__, __LINE__); error = EBUSY; goto out; } request = (MPI2_CONFIG_REQUEST *)cm->cm_req; bzero(request, sizeof(MPI2_CONFIG_REQUEST)); request->Function = MPI2_FUNCTION_CONFIG; request->Action = MPI2_CONFIG_ACTION_PAGE_HEADER; request->Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; request->ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE; request->Header.PageNumber = 0; request->Header.PageVersion = MPI2_SASDEVICE0_PAGEVERSION; cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; cm->cm_data = NULL; error = mps_wait_command(sc, &cm, 60, CAN_SLEEP); if (cm != NULL) reply = (MPI2_CONFIG_REPLY *)cm->cm_reply; if (error || (reply == NULL)) { /* FIXME */ /* * If the request returns an error then we need to do a diag * reset */ printf("%s: request for header completed with error %d\n", __func__, error); error = ENXIO; goto out; } ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK; bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY)); if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { /* FIXME */ /* * If the request returns an error then we need to do a diag * reset */ printf("%s: header read with error; iocstatus = 0x%x\n", __func__, ioc_status); error = ENXIO; goto out; } /* We have to do free and alloc for the reply-free and reply-post * counters to match - Need to review the reply FIFO handling. */ mps_free_command(sc, cm); if ((cm = mps_alloc_command(sc)) == NULL) { printf("%s: command alloc failed @ line %d\n", __func__, __LINE__); error = EBUSY; goto out; } request = (MPI2_CONFIG_REQUEST *)cm->cm_req; bzero(request, sizeof(MPI2_CONFIG_REQUEST)); request->Function = MPI2_FUNCTION_CONFIG; request->Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; request->Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; request->ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE; request->Header.PageNumber = 0; request->Header.PageVersion = MPI2_SASDEVICE0_PAGEVERSION; request->ExtPageLength = mpi_reply->ExtPageLength; request->PageAddress = htole32(form | handle); cm->cm_length = le16toh(mpi_reply->ExtPageLength) * 4; cm->cm_sge = &request->PageBufferSGE; cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION); cm->cm_flags = MPS_CM_FLAGS_SGE_SIMPLE | MPS_CM_FLAGS_DATAIN; cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; page = malloc(cm->cm_length, M_MPT2, M_ZERO | M_NOWAIT); if (!page) { printf("%s: page alloc failed\n", __func__); error = ENOMEM; goto out; } cm->cm_data = page; error = mps_wait_command(sc, &cm, 60, CAN_SLEEP); if (cm != NULL) reply = (MPI2_CONFIG_REPLY *)cm->cm_reply; if (error || (reply == NULL)) { /* FIXME */ /* * If the request returns an error then we need to do a diag * reset */ printf("%s: request for page completed with error %d\n", __func__, error); error = ENXIO; goto out; } ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK; bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY)); if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { /* FIXME */ /* * If the request returns an error then we need to do a diag * reset */ printf("%s: page read with error; iocstatus = 0x%x\n", __func__, ioc_status); error = ENXIO; goto out; } bcopy(page, config_page, MIN(cm->cm_length, sizeof(Mpi2SasDevicePage0_t))); out: free(page, M_MPT2); if (cm) mps_free_command(sc, cm); return (error); } /** * mps_config_get_bios_pg3 - obtain BIOS page 3 * @sc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * Context: sleep. * * Returns 0 for success, non-zero for failure. */ int mps_config_get_bios_pg3(struct mps_softc *sc, Mpi2ConfigReply_t *mpi_reply, Mpi2BiosPage3_t *config_page) { MPI2_CONFIG_REQUEST *request; MPI2_CONFIG_REPLY *reply = NULL; struct mps_command *cm; Mpi2BiosPage3_t *page = NULL; int error = 0; u16 ioc_status; mps_dprint(sc, MPS_TRACE, "%s\n", __func__); if ((cm = mps_alloc_command(sc)) == NULL) { printf("%s: command alloc failed @ line %d\n", __func__, __LINE__); error = EBUSY; goto out; } request = (MPI2_CONFIG_REQUEST *)cm->cm_req; bzero(request, sizeof(MPI2_CONFIG_REQUEST)); request->Function = MPI2_FUNCTION_CONFIG; request->Action = MPI2_CONFIG_ACTION_PAGE_HEADER; request->Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS; request->Header.PageNumber = 3; request->Header.PageVersion = MPI2_BIOSPAGE3_PAGEVERSION; cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; cm->cm_data = NULL; error = mps_wait_command(sc, &cm, 60, CAN_SLEEP); if (cm != NULL) reply = (MPI2_CONFIG_REPLY *)cm->cm_reply; if (error || (reply == NULL)) { /* FIXME */ /* * If the request returns an error then we need to do a diag * reset */ printf("%s: request for header completed with error %d\n", __func__, error); error = ENXIO; goto out; } ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK; bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY)); if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { /* FIXME */ /* * If the request returns an error then we need to do a diag * reset */ printf("%s: header read with error; iocstatus = 0x%x\n", __func__, ioc_status); error = ENXIO; goto out; } /* We have to do free and alloc for the reply-free and reply-post * counters to match - Need to review the reply FIFO handling. */ mps_free_command(sc, cm); if ((cm = mps_alloc_command(sc)) == NULL) { printf("%s: command alloc failed @ line %d\n", __func__, __LINE__); error = EBUSY; goto out; } request = (MPI2_CONFIG_REQUEST *)cm->cm_req; bzero(request, sizeof(MPI2_CONFIG_REQUEST)); request->Function = MPI2_FUNCTION_CONFIG; request->Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; request->Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS; request->Header.PageNumber = 3; request->Header.PageVersion = MPI2_BIOSPAGE3_PAGEVERSION; request->Header.PageLength = mpi_reply->Header.PageLength; cm->cm_length = le16toh(mpi_reply->Header.PageLength) * 4; cm->cm_sge = &request->PageBufferSGE; cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION); cm->cm_flags = MPS_CM_FLAGS_SGE_SIMPLE | MPS_CM_FLAGS_DATAIN; cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; page = malloc(cm->cm_length, M_MPT2, M_ZERO | M_NOWAIT); if (!page) { printf("%s: page alloc failed\n", __func__); error = ENOMEM; goto out; } cm->cm_data = page; error = mps_wait_command(sc, &cm, 60, CAN_SLEEP); if (cm != NULL) reply = (MPI2_CONFIG_REPLY *)cm->cm_reply; if (error || (reply == NULL)) { /* FIXME */ /* * If the request returns an error then we need to do a diag * reset */ printf("%s: request for page completed with error %d\n", __func__, error); error = ENXIO; goto out; } ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK; bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY)); if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { /* FIXME */ /* * If the request returns an error then we need to do a diag * reset */ printf("%s: page read with error; iocstatus = 0x%x\n", __func__, ioc_status); error = ENXIO; goto out; } bcopy(page, config_page, MIN(cm->cm_length, sizeof(Mpi2BiosPage3_t))); out: free(page, M_MPT2); if (cm) mps_free_command(sc, cm); return (error); } /** * mps_config_get_raid_volume_pg0 - obtain raid volume page 0 * @sc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @page_address: form and handle value used to get page * Context: sleep. * * Returns 0 for success, non-zero for failure. */ int mps_config_get_raid_volume_pg0(struct mps_softc *sc, Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage0_t *config_page, u32 page_address) { MPI2_CONFIG_REQUEST *request; MPI2_CONFIG_REPLY *reply = NULL; struct mps_command *cm; Mpi2RaidVolPage0_t *page = NULL; int error = 0; u16 ioc_status; mps_dprint(sc, MPS_TRACE, "%s\n", __func__); if ((cm = mps_alloc_command(sc)) == NULL) { printf("%s: command alloc failed @ line %d\n", __func__, __LINE__); error = EBUSY; goto out; } request = (MPI2_CONFIG_REQUEST *)cm->cm_req; bzero(request, sizeof(MPI2_CONFIG_REQUEST)); request->Function = MPI2_FUNCTION_CONFIG; request->Action = MPI2_CONFIG_ACTION_PAGE_HEADER; request->Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME; request->Header.PageNumber = 0; request->Header.PageVersion = MPI2_RAIDVOLPAGE0_PAGEVERSION; cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; cm->cm_data = NULL; /* * This page must be polled because the IOC isn't ready yet when this * page is needed. */ error = mps_wait_command(sc, &cm, 60, 0); if (cm != NULL) reply = (MPI2_CONFIG_REPLY *)cm->cm_reply; if (error || (reply == NULL)) { /* FIXME */ /* If the poll returns error then we need to do diag reset */ printf("%s: poll for header completed with error %d\n", __func__, error); error = ENXIO; goto out; } ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK; bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY)); if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { /* FIXME */ /* If the poll returns error then we need to do diag reset */ printf("%s: header read with error; iocstatus = 0x%x\n", __func__, ioc_status); error = ENXIO; goto out; } /* We have to do free and alloc for the reply-free and reply-post * counters to match - Need to review the reply FIFO handling. */ mps_free_command(sc, cm); if ((cm = mps_alloc_command(sc)) == NULL) { printf("%s: command alloc failed @ line %d\n", __func__, __LINE__); error = EBUSY; goto out; } request = (MPI2_CONFIG_REQUEST *)cm->cm_req; bzero(request, sizeof(MPI2_CONFIG_REQUEST)); request->Function = MPI2_FUNCTION_CONFIG; request->Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; request->Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME; request->Header.PageNumber = 0; request->Header.PageLength = mpi_reply->Header.PageLength; request->Header.PageVersion = mpi_reply->Header.PageVersion; request->PageAddress = page_address; cm->cm_length = le16toh(mpi_reply->Header.PageLength) * 4; cm->cm_sge = &request->PageBufferSGE; cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION); cm->cm_flags = MPS_CM_FLAGS_SGE_SIMPLE | MPS_CM_FLAGS_DATAIN; cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; page = malloc(cm->cm_length, M_MPT2, M_ZERO | M_NOWAIT); if (!page) { printf("%s: page alloc failed\n", __func__); error = ENOMEM; goto out; } cm->cm_data = page; /* * This page must be polled because the IOC isn't ready yet when this * page is needed. */ error = mps_wait_command(sc, &cm, 60, 0); if (cm != NULL) reply = (MPI2_CONFIG_REPLY *)cm->cm_reply; if (error || (reply == NULL)) { /* FIXME */ /* If the poll returns error then we need to do diag reset */ printf("%s: poll for page completed with error %d\n", __func__, error); error = ENXIO; goto out; } ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK; bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY)); if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { /* FIXME */ /* If the poll returns error then we need to do diag reset */ printf("%s: page read with error; iocstatus = 0x%x\n", __func__, ioc_status); error = ENXIO; goto out; } bcopy(page, config_page, cm->cm_length); out: free(page, M_MPT2); if (cm) mps_free_command(sc, cm); return (error); } /** * mps_config_get_raid_volume_pg1 - obtain raid volume page 1 * @sc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @form: GET_NEXT_HANDLE or HANDLE * @handle: volume handle * Context: sleep. * * Returns 0 for success, non-zero for failure. */ int mps_config_get_raid_volume_pg1(struct mps_softc *sc, Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage1_t *config_page, u32 form, u16 handle) { MPI2_CONFIG_REQUEST *request; MPI2_CONFIG_REPLY *reply = NULL; struct mps_command *cm; Mpi2RaidVolPage1_t *page = NULL; int error = 0; u16 ioc_status; mps_dprint(sc, MPS_TRACE, "%s\n", __func__); if ((cm = mps_alloc_command(sc)) == NULL) { printf("%s: command alloc failed @ line %d\n", __func__, __LINE__); error = EBUSY; goto out; } request = (MPI2_CONFIG_REQUEST *)cm->cm_req; bzero(request, sizeof(MPI2_CONFIG_REQUEST)); request->Function = MPI2_FUNCTION_CONFIG; request->Action = MPI2_CONFIG_ACTION_PAGE_HEADER; request->Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME; request->Header.PageNumber = 1; request->Header.PageVersion = MPI2_RAIDVOLPAGE1_PAGEVERSION; cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; cm->cm_data = NULL; error = mps_wait_command(sc, &cm, 60, CAN_SLEEP); if (cm != NULL) reply = (MPI2_CONFIG_REPLY *)cm->cm_reply; if (error || (reply == NULL)) { /* FIXME */ /* * If the request returns an error then we need to do a diag * reset */ printf("%s: request for header completed with error %d\n", __func__, error); error = ENXIO; goto out; } ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK; bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY)); if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { /* FIXME */ /* * If the request returns an error then we need to do a diag * reset */ printf("%s: header read with error; iocstatus = 0x%x\n", __func__, ioc_status); error = ENXIO; goto out; } /* We have to do free and alloc for the reply-free and reply-post * counters to match - Need to review the reply FIFO handling. */ mps_free_command(sc, cm); if ((cm = mps_alloc_command(sc)) == NULL) { printf("%s: command alloc failed @ line %d\n", __func__, __LINE__); error = EBUSY; goto out; } request = (MPI2_CONFIG_REQUEST *)cm->cm_req; bzero(request, sizeof(MPI2_CONFIG_REQUEST)); request->Function = MPI2_FUNCTION_CONFIG; request->Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; request->Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME; request->Header.PageNumber = 1; request->Header.PageLength = mpi_reply->Header.PageLength; request->Header.PageVersion = mpi_reply->Header.PageVersion; request->PageAddress = htole32(form | handle); cm->cm_length = le16toh(mpi_reply->Header.PageLength) * 4; cm->cm_sge = &request->PageBufferSGE; cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION); cm->cm_flags = MPS_CM_FLAGS_SGE_SIMPLE | MPS_CM_FLAGS_DATAIN; cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; page = malloc(cm->cm_length, M_MPT2, M_ZERO | M_NOWAIT); if (!page) { printf("%s: page alloc failed\n", __func__); error = ENOMEM; goto out; } cm->cm_data = page; error = mps_wait_command(sc, &cm, 60, CAN_SLEEP); if (cm != NULL) reply = (MPI2_CONFIG_REPLY *)cm->cm_reply; if (error || (reply == NULL)) { /* FIXME */ /* * If the request returns an error then we need to do a diag * reset */ printf("%s: request for page completed with error %d\n", __func__, error); error = ENXIO; goto out; } ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK; bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY)); if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { /* FIXME */ /* * If the request returns an error then we need to do a diag * reset */ printf("%s: page read with error; iocstatus = 0x%x\n", __func__, ioc_status); error = ENXIO; goto out; } bcopy(page, config_page, MIN(cm->cm_length, sizeof(Mpi2RaidVolPage1_t))); out: free(page, M_MPT2); if (cm) mps_free_command(sc, cm); return (error); } /** * mps_config_get_volume_wwid - returns wwid given the volume handle * @sc: per adapter object * @volume_handle: volume handle * @wwid: volume wwid * Context: sleep. * * Returns 0 for success, non-zero for failure. */ int mps_config_get_volume_wwid(struct mps_softc *sc, u16 volume_handle, u64 *wwid) { Mpi2ConfigReply_t mpi_reply; Mpi2RaidVolPage1_t raid_vol_pg1; *wwid = 0; if (!(mps_config_get_raid_volume_pg1(sc, &mpi_reply, &raid_vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, volume_handle))) { *wwid = le64toh((u64)raid_vol_pg1.WWID.High << 32 | raid_vol_pg1.WWID.Low); return 0; } else return -1; } /** * mps_config_get_pd_pg0 - obtain raid phys disk page 0 * @sc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page * @page_address: form and handle value used to get page * Context: sleep. * * Returns 0 for success, non-zero for failure. */ int mps_config_get_raid_pd_pg0(struct mps_softc *sc, Mpi2ConfigReply_t *mpi_reply, Mpi2RaidPhysDiskPage0_t *config_page, u32 page_address) { MPI2_CONFIG_REQUEST *request; MPI2_CONFIG_REPLY *reply = NULL; struct mps_command *cm; Mpi2RaidPhysDiskPage0_t *page = NULL; int error = 0; u16 ioc_status; mps_dprint(sc, MPS_TRACE, "%s\n", __func__); if ((cm = mps_alloc_command(sc)) == NULL) { printf("%s: command alloc failed @ line %d\n", __func__, __LINE__); error = EBUSY; goto out; } request = (MPI2_CONFIG_REQUEST *)cm->cm_req; bzero(request, sizeof(MPI2_CONFIG_REQUEST)); request->Function = MPI2_FUNCTION_CONFIG; request->Action = MPI2_CONFIG_ACTION_PAGE_HEADER; request->Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK; request->Header.PageNumber = 0; request->Header.PageVersion = MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION; cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; cm->cm_data = NULL; /* * This page must be polled because the IOC isn't ready yet when this * page is needed. */ error = mps_wait_command(sc, &cm, 60, 0); if (cm != NULL) reply = (MPI2_CONFIG_REPLY *)cm->cm_reply; if (error || (reply == NULL)) { /* FIXME */ /* If the poll returns error then we need to do diag reset */ printf("%s: poll for header completed with error %d\n", __func__, error); error = ENXIO; goto out; } ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK; bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY)); if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { /* FIXME */ /* If the poll returns error then we need to do diag reset */ printf("%s: header read with error; iocstatus = 0x%x\n", __func__, ioc_status); error = ENXIO; goto out; } /* We have to do free and alloc for the reply-free and reply-post * counters to match - Need to review the reply FIFO handling. */ mps_free_command(sc, cm); if ((cm = mps_alloc_command(sc)) == NULL) { printf("%s: command alloc failed @ line %d\n", __func__, __LINE__); error = EBUSY; goto out; } request = (MPI2_CONFIG_REQUEST *)cm->cm_req; bzero(request, sizeof(MPI2_CONFIG_REQUEST)); request->Function = MPI2_FUNCTION_CONFIG; request->Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; request->Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK; request->Header.PageNumber = 0; request->Header.PageLength = mpi_reply->Header.PageLength; request->Header.PageVersion = mpi_reply->Header.PageVersion; request->PageAddress = page_address; cm->cm_length = le16toh(mpi_reply->Header.PageLength) * 4; cm->cm_sge = &request->PageBufferSGE; cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION); cm->cm_flags = MPS_CM_FLAGS_SGE_SIMPLE | MPS_CM_FLAGS_DATAIN; cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; page = malloc(cm->cm_length, M_MPT2, M_ZERO | M_NOWAIT); if (!page) { printf("%s: page alloc failed\n", __func__); error = ENOMEM; goto out; } cm->cm_data = page; /* * This page must be polled because the IOC isn't ready yet when this * page is needed. */ error = mps_wait_command(sc, &cm, 60, 0); if (cm != NULL) reply = (MPI2_CONFIG_REPLY *)cm->cm_reply; if (error || (reply == NULL)) { /* FIXME */ /* If the poll returns error then we need to do diag reset */ printf("%s: poll for page completed with error %d\n", __func__, error); error = ENXIO; goto out; } ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK; bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY)); if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { /* FIXME */ /* If the poll returns error then we need to do diag reset */ printf("%s: page read with error; iocstatus = 0x%x\n", __func__, ioc_status); error = ENXIO; goto out; } bcopy(page, config_page, MIN(cm->cm_length, sizeof(Mpi2RaidPhysDiskPage0_t))); out: free(page, M_MPT2); if (cm) mps_free_command(sc, cm); return (error); }