/*- * SPDX-License-Identifier: BSD-2-Clause * * Copyright (c) 2006-2015 LSI Corp. * Copyright (c) 2013-2015 Avago Technologies * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD */ /* * Copyright (c) 2006-2015 LSI Corporation. * Copyright (c) 2013-2015 Avago Technologies * * * Name: mpi2_ioc.h * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages * Creation Date: October 11, 2006 * * mpi2_ioc.h Version: 02.00.16 * * Version History * --------------- * * Date Version Description * -------- -------- ------------------------------------------------------ * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. * 06-04-07 02.00.01 In IOCFacts Reply structure, renamed MaxDevices to * MaxTargets. * Added TotalImageSize field to FWDownload Request. * Added reserved words to FWUpload Request. * 06-26-07 02.00.02 Added IR Configuration Change List Event. * 08-31-07 02.00.03 Removed SystemReplyQueueDepth field from the IOCInit * request and replaced it with * ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth. * Replaced the MinReplyQueueDepth field of the IOCFacts * reply with MaxReplyDescriptorPostQueueDepth. * Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum * depth for the Reply Descriptor Post Queue. * Added SASAddress field to Initiator Device Table * Overflow Event data. * 10-31-07 02.00.04 Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING * for SAS Initiator Device Status Change Event data. * Modified Reason Code defines for SAS Topology Change * List Event data, including adding a bit for PHY Vacant * status, and adding a mask for the Reason Code. * Added define for * MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING. * Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID. * 12-18-07 02.00.05 Added Boot Status defines for the IOCExceptions field of * the IOCFacts Reply. * Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. * Moved MPI2_VERSION_UNION to mpi2.h. * Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks * instead of enables, and added SASBroadcastPrimitiveMasks * field. * Added Log Entry Added Event and related structure. * 02-29-08 02.00.06 Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID. * Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET. * Added MaxVolumes and MaxPersistentEntries fields to * IOCFacts reply. * Added ProtocalFlags and IOCCapabilities fields to * MPI2_FW_IMAGE_HEADER. * Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT. * 03-03-08 02.00.07 Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to * a U16 (from a U32). * Removed extra 's' from EventMasks name. * 06-27-08 02.00.08 Fixed an offset in a comment. * 10-02-08 02.00.09 Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST. * Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and * renamed MinReplyFrameSize to ReplyFrameSize. * Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX. * Added two new RAIDOperation values for Integrated RAID * Operations Status Event data. * Added four new IR Configuration Change List Event data * ReasonCode values. * Added two new ReasonCode defines for SAS Device Status * Change Event data. * Added three new DiscoveryStatus bits for the SAS * Discovery event data. * Added Multiplexing Status Change bit to the PhyStatus * field of the SAS Topology Change List event data. * Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY. * BootFlags are now product-specific. * Added defines for the indivdual signature bytes * for MPI2_INIT_IMAGE_FOOTER. * 01-19-09 02.00.10 Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define. * Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR * define. * Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE * define. * Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define. * 05-06-09 02.00.11 Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define. * Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define. * Added two new reason codes for SAS Device Status Change * Event. * Added new event: SAS PHY Counter. * 07-30-09 02.00.12 Added GPIO Interrupt event define and structure. * Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. * Added new product id family for 2208. * 10-28-09 02.00.13 Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST. * Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY. * Added MinDevHandle field to MPI2_IOC_FACTS_REPLY. * Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY. * Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define. * Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define. * Added Host Based Discovery Phy Event data. * Added defines for ProductID Product field * (MPI2_FW_HEADER_PID_). * Modified values for SAS ProductID Family * (MPI2_FW_HEADER_PID_FAMILY_). * 02-10-10 02.00.14 Added SAS Quiesce Event structure and defines. * Added PowerManagementControl Request structures and * defines. * 05-12-10 02.00.15 Marked Task Set Full Event as obsolete. * Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define. * 11-10-10 02.00.16 Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC. * -------------------------------------------------------------------------- */ #ifndef MPI2_IOC_H #define MPI2_IOC_H /***************************************************************************** * * IOC Messages * *****************************************************************************/ /**************************************************************************** * IOCInit message ****************************************************************************/ /* IOCInit Request message */ typedef struct _MPI2_IOC_INIT_REQUEST { U8 WhoInit; /* 0x00 */ U8 Reserved1; /* 0x01 */ U8 ChainOffset; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved2; /* 0x04 */ U8 Reserved3; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved4; /* 0x0A */ U16 MsgVersion; /* 0x0C */ U16 HeaderVersion; /* 0x0E */ U32 Reserved5; /* 0x10 */ U16 Reserved6; /* 0x14 */ U8 Reserved7; /* 0x16 */ U8 HostMSIxVectors; /* 0x17 */ U16 Reserved8; /* 0x18 */ U16 SystemRequestFrameSize; /* 0x1A */ U16 ReplyDescriptorPostQueueDepth; /* 0x1C */ U16 ReplyFreeQueueDepth; /* 0x1E */ U32 SenseBufferAddressHigh; /* 0x20 */ U32 SystemReplyAddressHigh; /* 0x24 */ U64 SystemRequestFrameBaseAddress; /* 0x28 */ U64 ReplyDescriptorPostQueueAddress;/* 0x30 */ U64 ReplyFreeQueueAddress; /* 0x38 */ U64 TimeStamp; /* 0x40 */ } MPI2_IOC_INIT_REQUEST, MPI2_POINTER PTR_MPI2_IOC_INIT_REQUEST, Mpi2IOCInitRequest_t, MPI2_POINTER pMpi2IOCInitRequest_t; /* WhoInit values */ #define MPI2_WHOINIT_NOT_INITIALIZED (0x00) #define MPI2_WHOINIT_SYSTEM_BIOS (0x01) #define MPI2_WHOINIT_ROM_BIOS (0x02) #define MPI2_WHOINIT_PCI_PEER (0x03) #define MPI2_WHOINIT_HOST_DRIVER (0x04) #define MPI2_WHOINIT_MANUFACTURER (0x05) /* MsgVersion */ #define MPI2_IOCINIT_MSGVERSION_MAJOR_MASK (0xFF00) #define MPI2_IOCINIT_MSGVERSION_MAJOR_SHIFT (8) #define MPI2_IOCINIT_MSGVERSION_MINOR_MASK (0x00FF) #define MPI2_IOCINIT_MSGVERSION_MINOR_SHIFT (0) /* HeaderVersion */ #define MPI2_IOCINIT_HDRVERSION_UNIT_MASK (0xFF00) #define MPI2_IOCINIT_HDRVERSION_UNIT_SHIFT (8) #define MPI2_IOCINIT_HDRVERSION_DEV_MASK (0x00FF) #define MPI2_IOCINIT_HDRVERSION_DEV_SHIFT (0) /* minimum depth for the Reply Descriptor Post Queue */ #define MPI2_RDPQ_DEPTH_MIN (16) /* IOCInit Reply message */ typedef struct _MPI2_IOC_INIT_REPLY { U8 WhoInit; /* 0x00 */ U8 Reserved1; /* 0x01 */ U8 MsgLength; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved2; /* 0x04 */ U8 Reserved3; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved4; /* 0x0A */ U16 Reserved5; /* 0x0C */ U16 IOCStatus; /* 0x0E */ U32 IOCLogInfo; /* 0x10 */ } MPI2_IOC_INIT_REPLY, MPI2_POINTER PTR_MPI2_IOC_INIT_REPLY, Mpi2IOCInitReply_t, MPI2_POINTER pMpi2IOCInitReply_t; /**************************************************************************** * IOCFacts message ****************************************************************************/ /* IOCFacts Request message */ typedef struct _MPI2_IOC_FACTS_REQUEST { U16 Reserved1; /* 0x00 */ U8 ChainOffset; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved2; /* 0x04 */ U8 Reserved3; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved4; /* 0x0A */ } MPI2_IOC_FACTS_REQUEST, MPI2_POINTER PTR_MPI2_IOC_FACTS_REQUEST, Mpi2IOCFactsRequest_t, MPI2_POINTER pMpi2IOCFactsRequest_t; /* IOCFacts Reply message */ typedef struct _MPI2_IOC_FACTS_REPLY { U16 MsgVersion; /* 0x00 */ U8 MsgLength; /* 0x02 */ U8 Function; /* 0x03 */ U16 HeaderVersion; /* 0x04 */ U8 IOCNumber; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved1; /* 0x0A */ U16 IOCExceptions; /* 0x0C */ U16 IOCStatus; /* 0x0E */ U32 IOCLogInfo; /* 0x10 */ U8 MaxChainDepth; /* 0x14 */ U8 WhoInit; /* 0x15 */ U8 NumberOfPorts; /* 0x16 */ U8 MaxMSIxVectors; /* 0x17 */ U16 RequestCredit; /* 0x18 */ U16 ProductID; /* 0x1A */ U32 IOCCapabilities; /* 0x1C */ MPI2_VERSION_UNION FWVersion; /* 0x20 */ U16 IOCRequestFrameSize; /* 0x24 */ U16 Reserved3; /* 0x26 */ U16 MaxInitiators; /* 0x28 */ U16 MaxTargets; /* 0x2A */ U16 MaxSasExpanders; /* 0x2C */ U16 MaxEnclosures; /* 0x2E */ U16 ProtocolFlags; /* 0x30 */ U16 HighPriorityCredit; /* 0x32 */ U16 MaxReplyDescriptorPostQueueDepth; /* 0x34 */ U8 ReplyFrameSize; /* 0x36 */ U8 MaxVolumes; /* 0x37 */ U16 MaxDevHandle; /* 0x38 */ U16 MaxPersistentEntries; /* 0x3A */ U16 MinDevHandle; /* 0x3C */ U16 Reserved4; /* 0x3E */ } MPI2_IOC_FACTS_REPLY, MPI2_POINTER PTR_MPI2_IOC_FACTS_REPLY, Mpi2IOCFactsReply_t, MPI2_POINTER pMpi2IOCFactsReply_t; /* MsgVersion */ #define MPI2_IOCFACTS_MSGVERSION_MAJOR_MASK (0xFF00) #define MPI2_IOCFACTS_MSGVERSION_MAJOR_SHIFT (8) #define MPI2_IOCFACTS_MSGVERSION_MINOR_MASK (0x00FF) #define MPI2_IOCFACTS_MSGVERSION_MINOR_SHIFT (0) /* HeaderVersion */ #define MPI2_IOCFACTS_HDRVERSION_UNIT_MASK (0xFF00) #define MPI2_IOCFACTS_HDRVERSION_UNIT_SHIFT (8) #define MPI2_IOCFACTS_HDRVERSION_DEV_MASK (0x00FF) #define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT (0) /* IOCExceptions */ #define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX (0x0100) #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x00E0) #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_GOOD (0x0000) #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_BACKUP (0x0020) #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_RESTORED (0x0040) #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_CORRUPT_BACKUP (0x0060) #define MPI2_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED (0x0010) #define MPI2_IOCFACTS_EXCEPT_MANUFACT_CHECKSUM_FAIL (0x0008) #define MPI2_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0004) #define MPI2_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID (0x0002) #define MPI2_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0001) /* defines for WhoInit field are after the IOCInit Request */ /* ProductID field uses MPI2_FW_HEADER_PID_ */ /* IOCCapabilities */ #define MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY (0x00010000) #define MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX (0x00008000) #define MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR (0x00004000) #define MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY (0x00002000) #define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID (0x00001000) #define MPI2_IOCFACTS_CAPABILITY_TLR (0x00000800) #define MPI2_IOCFACTS_CAPABILITY_MULTICAST (0x00000100) #define MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET (0x00000080) #define MPI2_IOCFACTS_CAPABILITY_EEDP (0x00000040) #define MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER (0x00000020) #define MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER (0x00000010) #define MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER (0x00000008) #define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004) /* ProtocolFlags */ #define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001) #define MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002) /**************************************************************************** * PortFacts message ****************************************************************************/ /* PortFacts Request message */ typedef struct _MPI2_PORT_FACTS_REQUEST { U16 Reserved1; /* 0x00 */ U8 ChainOffset; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved2; /* 0x04 */ U8 PortNumber; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved3; /* 0x0A */ } MPI2_PORT_FACTS_REQUEST, MPI2_POINTER PTR_MPI2_PORT_FACTS_REQUEST, Mpi2PortFactsRequest_t, MPI2_POINTER pMpi2PortFactsRequest_t; /* PortFacts Reply message */ typedef struct _MPI2_PORT_FACTS_REPLY { U16 Reserved1; /* 0x00 */ U8 MsgLength; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved2; /* 0x04 */ U8 PortNumber; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved3; /* 0x0A */ U16 Reserved4; /* 0x0C */ U16 IOCStatus; /* 0x0E */ U32 IOCLogInfo; /* 0x10 */ U8 Reserved5; /* 0x14 */ U8 PortType; /* 0x15 */ U16 Reserved6; /* 0x16 */ U16 MaxPostedCmdBuffers; /* 0x18 */ U16 Reserved7; /* 0x1A */ } MPI2_PORT_FACTS_REPLY, MPI2_POINTER PTR_MPI2_PORT_FACTS_REPLY, Mpi2PortFactsReply_t, MPI2_POINTER pMpi2PortFactsReply_t; /* PortType values */ #define MPI2_PORTFACTS_PORTTYPE_INACTIVE (0x00) #define MPI2_PORTFACTS_PORTTYPE_FC (0x10) #define MPI2_PORTFACTS_PORTTYPE_ISCSI (0x20) #define MPI2_PORTFACTS_PORTTYPE_SAS_PHYSICAL (0x30) #define MPI2_PORTFACTS_PORTTYPE_SAS_VIRTUAL (0x31) /**************************************************************************** * PortEnable message ****************************************************************************/ /* PortEnable Request message */ typedef struct _MPI2_PORT_ENABLE_REQUEST { U16 Reserved1; /* 0x00 */ U8 ChainOffset; /* 0x02 */ U8 Function; /* 0x03 */ U8 Reserved2; /* 0x04 */ U8 PortFlags; /* 0x05 */ U8 Reserved3; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved4; /* 0x0A */ } MPI2_PORT_ENABLE_REQUEST, MPI2_POINTER PTR_MPI2_PORT_ENABLE_REQUEST, Mpi2PortEnableRequest_t, MPI2_POINTER pMpi2PortEnableRequest_t; /* PortEnable Reply message */ typedef struct _MPI2_PORT_ENABLE_REPLY { U16 Reserved1; /* 0x00 */ U8 MsgLength; /* 0x02 */ U8 Function; /* 0x03 */ U8 Reserved2; /* 0x04 */ U8 PortFlags; /* 0x05 */ U8 Reserved3; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved4; /* 0x0A */ U16 Reserved5; /* 0x0C */ U16 IOCStatus; /* 0x0E */ U32 IOCLogInfo; /* 0x10 */ } MPI2_PORT_ENABLE_REPLY, MPI2_POINTER PTR_MPI2_PORT_ENABLE_REPLY, Mpi2PortEnableReply_t, MPI2_POINTER pMpi2PortEnableReply_t; /**************************************************************************** * EventNotification message ****************************************************************************/ /* EventNotification Request message */ #define MPI2_EVENT_NOTIFY_EVENTMASK_WORDS (4) typedef struct _MPI2_EVENT_NOTIFICATION_REQUEST { U16 Reserved1; /* 0x00 */ U8 ChainOffset; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved2; /* 0x04 */ U8 Reserved3; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved4; /* 0x0A */ U32 Reserved5; /* 0x0C */ U32 Reserved6; /* 0x10 */ U32 EventMasks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];/* 0x14 */ U16 SASBroadcastPrimitiveMasks; /* 0x24 */ U16 Reserved7; /* 0x26 */ U32 Reserved8; /* 0x28 */ } MPI2_EVENT_NOTIFICATION_REQUEST, MPI2_POINTER PTR_MPI2_EVENT_NOTIFICATION_REQUEST, Mpi2EventNotificationRequest_t, MPI2_POINTER pMpi2EventNotificationRequest_t; /* EventNotification Reply message */ typedef struct _MPI2_EVENT_NOTIFICATION_REPLY { U16 EventDataLength; /* 0x00 */ U8 MsgLength; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved1; /* 0x04 */ U8 AckRequired; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved2; /* 0x0A */ U16 Reserved3; /* 0x0C */ U16 IOCStatus; /* 0x0E */ U32 IOCLogInfo; /* 0x10 */ U16 Event; /* 0x14 */ U16 Reserved4; /* 0x16 */ U32 EventContext; /* 0x18 */ U32 EventData[1]; /* 0x1C */ } MPI2_EVENT_NOTIFICATION_REPLY, MPI2_POINTER PTR_MPI2_EVENT_NOTIFICATION_REPLY, Mpi2EventNotificationReply_t, MPI2_POINTER pMpi2EventNotificationReply_t; /* AckRequired */ #define MPI2_EVENT_NOTIFICATION_ACK_NOT_REQUIRED (0x00) #define MPI2_EVENT_NOTIFICATION_ACK_REQUIRED (0x01) /* Event */ #define MPI2_EVENT_LOG_DATA (0x0001) #define MPI2_EVENT_STATE_CHANGE (0x0002) #define MPI2_EVENT_HARD_RESET_RECEIVED (0x0005) #define MPI2_EVENT_EVENT_CHANGE (0x000A) #define MPI2_EVENT_TASK_SET_FULL (0x000E) /* obsolete */ #define MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE (0x000F) #define MPI2_EVENT_IR_OPERATION_STATUS (0x0014) #define MPI2_EVENT_SAS_DISCOVERY (0x0016) #define MPI2_EVENT_SAS_BROADCAST_PRIMITIVE (0x0017) #define MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x0018) #define MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW (0x0019) #define MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST (0x001C) #define MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE (0x001D) #define MPI2_EVENT_IR_VOLUME (0x001E) #define MPI2_EVENT_IR_PHYSICAL_DISK (0x001F) #define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST (0x0020) #define MPI2_EVENT_LOG_ENTRY_ADDED (0x0021) #define MPI2_EVENT_SAS_PHY_COUNTER (0x0022) #define MPI2_EVENT_GPIO_INTERRUPT (0x0023) #define MPI2_EVENT_HOST_BASED_DISCOVERY_PHY (0x0024) #define MPI2_EVENT_SAS_QUIESCE (0x0025) /* Log Entry Added Event data */ /* the following structure matches MPI2_LOG_0_ENTRY in mpi2_cnfg.h */ #define MPI2_EVENT_DATA_LOG_DATA_LENGTH (0x1C) typedef struct _MPI2_EVENT_DATA_LOG_ENTRY_ADDED { U64 TimeStamp; /* 0x00 */ U32 Reserved1; /* 0x08 */ U16 LogSequence; /* 0x0C */ U16 LogEntryQualifier; /* 0x0E */ U8 VP_ID; /* 0x10 */ U8 VF_ID; /* 0x11 */ U16 Reserved2; /* 0x12 */ U8 LogData[MPI2_EVENT_DATA_LOG_DATA_LENGTH];/* 0x14 */ } MPI2_EVENT_DATA_LOG_ENTRY_ADDED, MPI2_POINTER PTR_MPI2_EVENT_DATA_LOG_ENTRY_ADDED, Mpi2EventDataLogEntryAdded_t, MPI2_POINTER pMpi2EventDataLogEntryAdded_t; /* GPIO Interrupt Event data */ typedef struct _MPI2_EVENT_DATA_GPIO_INTERRUPT { U8 GPIONum; /* 0x00 */ U8 Reserved1; /* 0x01 */ U16 Reserved2; /* 0x02 */ } MPI2_EVENT_DATA_GPIO_INTERRUPT, MPI2_POINTER PTR_MPI2_EVENT_DATA_GPIO_INTERRUPT, Mpi2EventDataGpioInterrupt_t, MPI2_POINTER pMpi2EventDataGpioInterrupt_t; /* Hard Reset Received Event data */ typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED { U8 Reserved1; /* 0x00 */ U8 Port; /* 0x01 */ U16 Reserved2; /* 0x02 */ } MPI2_EVENT_DATA_HARD_RESET_RECEIVED, MPI2_POINTER PTR_MPI2_EVENT_DATA_HARD_RESET_RECEIVED, Mpi2EventDataHardResetReceived_t, MPI2_POINTER pMpi2EventDataHardResetReceived_t; /* Task Set Full Event data */ /* this event is obsolete */ typedef struct _MPI2_EVENT_DATA_TASK_SET_FULL { U16 DevHandle; /* 0x00 */ U16 CurrentDepth; /* 0x02 */ } MPI2_EVENT_DATA_TASK_SET_FULL, MPI2_POINTER PTR_MPI2_EVENT_DATA_TASK_SET_FULL, Mpi2EventDataTaskSetFull_t, MPI2_POINTER pMpi2EventDataTaskSetFull_t; /* SAS Device Status Change Event data */ typedef struct _MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE { U16 TaskTag; /* 0x00 */ U8 ReasonCode; /* 0x02 */ U8 Reserved1; /* 0x03 */ U8 ASC; /* 0x04 */ U8 ASCQ; /* 0x05 */ U16 DevHandle; /* 0x06 */ U32 Reserved2; /* 0x08 */ U64 SASAddress; /* 0x0C */ U8 LUN[8]; /* 0x14 */ } MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, Mpi2EventDataSasDeviceStatusChange_t, MPI2_POINTER pMpi2EventDataSasDeviceStatusChange_t; /* SAS Device Status Change Event data ReasonCode values */ #define MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05) #define MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07) #define MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08) #define MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL (0x09) #define MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A) #define MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B) #define MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C) #define MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION (0x0D) #define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E) #define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F) #define MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE (0x10) #define MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY (0x11) #define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY (0x12) /* Integrated RAID Operation Status Event data */ typedef struct _MPI2_EVENT_DATA_IR_OPERATION_STATUS { U16 VolDevHandle; /* 0x00 */ U16 Reserved1; /* 0x02 */ U8 RAIDOperation; /* 0x04 */ U8 PercentComplete; /* 0x05 */ U16 Reserved2; /* 0x06 */ U32 Resereved3; /* 0x08 */ } MPI2_EVENT_DATA_IR_OPERATION_STATUS, MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_OPERATION_STATUS, Mpi2EventDataIrOperationStatus_t, MPI2_POINTER pMpi2EventDataIrOperationStatus_t; /* Integrated RAID Operation Status Event data RAIDOperation values */ #define MPI2_EVENT_IR_RAIDOP_RESYNC (0x00) #define MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION (0x01) #define MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK (0x02) #define MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT (0x03) #define MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT (0x04) /* Integrated RAID Volume Event data */ typedef struct _MPI2_EVENT_DATA_IR_VOLUME { U16 VolDevHandle; /* 0x00 */ U8 ReasonCode; /* 0x02 */ U8 Reserved1; /* 0x03 */ U32 NewValue; /* 0x04 */ U32 PreviousValue; /* 0x08 */ } MPI2_EVENT_DATA_IR_VOLUME, MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_VOLUME, Mpi2EventDataIrVolume_t, MPI2_POINTER pMpi2EventDataIrVolume_t; /* Integrated RAID Volume Event data ReasonCode values */ #define MPI2_EVENT_IR_VOLUME_RC_SETTINGS_CHANGED (0x01) #define MPI2_EVENT_IR_VOLUME_RC_STATUS_FLAGS_CHANGED (0x02) #define MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED (0x03) /* Integrated RAID Physical Disk Event data */ typedef struct _MPI2_EVENT_DATA_IR_PHYSICAL_DISK { U16 Reserved1; /* 0x00 */ U8 ReasonCode; /* 0x02 */ U8 PhysDiskNum; /* 0x03 */ U16 PhysDiskDevHandle; /* 0x04 */ U16 Reserved2; /* 0x06 */ U16 Slot; /* 0x08 */ U16 EnclosureHandle; /* 0x0A */ U32 NewValue; /* 0x0C */ U32 PreviousValue; /* 0x10 */ } MPI2_EVENT_DATA_IR_PHYSICAL_DISK, MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_PHYSICAL_DISK, Mpi2EventDataIrPhysicalDisk_t, MPI2_POINTER pMpi2EventDataIrPhysicalDisk_t; /* Integrated RAID Physical Disk Event data ReasonCode values */ #define MPI2_EVENT_IR_PHYSDISK_RC_SETTINGS_CHANGED (0x01) #define MPI2_EVENT_IR_PHYSDISK_RC_STATUS_FLAGS_CHANGED (0x02) #define MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED (0x03) /* Integrated RAID Configuration Change List Event data */ /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check NumElements at runtime. */ #ifndef MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT #define MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT (1) #endif typedef struct _MPI2_EVENT_IR_CONFIG_ELEMENT { U16 ElementFlags; /* 0x00 */ U16 VolDevHandle; /* 0x02 */ U8 ReasonCode; /* 0x04 */ U8 PhysDiskNum; /* 0x05 */ U16 PhysDiskDevHandle; /* 0x06 */ } MPI2_EVENT_IR_CONFIG_ELEMENT, MPI2_POINTER PTR_MPI2_EVENT_IR_CONFIG_ELEMENT, Mpi2EventIrConfigElement_t, MPI2_POINTER pMpi2EventIrConfigElement_t; /* IR Configuration Change List Event data ElementFlags values */ #define MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK (0x000F) #define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT (0x0000) #define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT (0x0001) #define MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT (0x0002) /* IR Configuration Change List Event data ReasonCode values */ #define MPI2_EVENT_IR_CHANGE_RC_ADDED (0x01) #define MPI2_EVENT_IR_CHANGE_RC_REMOVED (0x02) #define MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE (0x03) #define MPI2_EVENT_IR_CHANGE_RC_HIDE (0x04) #define MPI2_EVENT_IR_CHANGE_RC_UNHIDE (0x05) #define MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED (0x06) #define MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED (0x07) #define MPI2_EVENT_IR_CHANGE_RC_PD_CREATED (0x08) #define MPI2_EVENT_IR_CHANGE_RC_PD_DELETED (0x09) typedef struct _MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST { U8 NumElements; /* 0x00 */ U8 Reserved1; /* 0x01 */ U8 Reserved2; /* 0x02 */ U8 ConfigNum; /* 0x03 */ U32 Flags; /* 0x04 */ MPI2_EVENT_IR_CONFIG_ELEMENT ConfigElement[MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT]; /* 0x08 */ } MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST, MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST, Mpi2EventDataIrConfigChangeList_t, MPI2_POINTER pMpi2EventDataIrConfigChangeList_t; /* IR Configuration Change List Event data Flags values */ #define MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG (0x00000001) /* SAS Discovery Event data */ typedef struct _MPI2_EVENT_DATA_SAS_DISCOVERY { U8 Flags; /* 0x00 */ U8 ReasonCode; /* 0x01 */ U8 PhysicalPort; /* 0x02 */ U8 Reserved1; /* 0x03 */ U32 DiscoveryStatus; /* 0x04 */ } MPI2_EVENT_DATA_SAS_DISCOVERY, MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_DISCOVERY, Mpi2EventDataSasDiscovery_t, MPI2_POINTER pMpi2EventDataSasDiscovery_t; /* SAS Discovery Event data Flags values */ #define MPI2_EVENT_SAS_DISC_DEVICE_CHANGE (0x02) #define MPI2_EVENT_SAS_DISC_IN_PROGRESS (0x01) /* SAS Discovery Event data ReasonCode values */ #define MPI2_EVENT_SAS_DISC_RC_STARTED (0x01) #define MPI2_EVENT_SAS_DISC_RC_COMPLETED (0x02) /* SAS Discovery Event data DiscoveryStatus values */ #define MPI2_EVENT_SAS_DISC_DS_MAX_ENCLOSURES_EXCEED (0x80000000) #define MPI2_EVENT_SAS_DISC_DS_MAX_EXPANDERS_EXCEED (0x40000000) #define MPI2_EVENT_SAS_DISC_DS_MAX_DEVICES_EXCEED (0x20000000) #define MPI2_EVENT_SAS_DISC_DS_MAX_TOPO_PHYS_EXCEED (0x10000000) #define MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR (0x08000000) #define MPI2_EVENT_SAS_DISC_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000) #define MPI2_EVENT_SAS_DISC_DS_EXP_MULTI_SUBTRACTIVE (0x00004000) #define MPI2_EVENT_SAS_DISC_DS_MULTI_PORT_DOMAIN (0x00002000) #define MPI2_EVENT_SAS_DISC_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000) #define MPI2_EVENT_SAS_DISC_DS_UNSUPPORTED_DEVICE (0x00000800) #define MPI2_EVENT_SAS_DISC_DS_TABLE_LINK (0x00000400) #define MPI2_EVENT_SAS_DISC_DS_SUBTRACTIVE_LINK (0x00000200) #define MPI2_EVENT_SAS_DISC_DS_SMP_CRC_ERROR (0x00000100) #define MPI2_EVENT_SAS_DISC_DS_SMP_FUNCTION_FAILED (0x00000080) #define MPI2_EVENT_SAS_DISC_DS_INDEX_NOT_EXIST (0x00000040) #define MPI2_EVENT_SAS_DISC_DS_OUT_ROUTE_ENTRIES (0x00000020) #define MPI2_EVENT_SAS_DISC_DS_SMP_TIMEOUT (0x00000010) #define MPI2_EVENT_SAS_DISC_DS_MULTIPLE_PORTS (0x00000004) #define MPI2_EVENT_SAS_DISC_DS_UNADDRESSABLE_DEVICE (0x00000002) #define MPI2_EVENT_SAS_DISC_DS_LOOP_DETECTED (0x00000001) /* SAS Broadcast Primitive Event data */ typedef struct _MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE { U8 PhyNum; /* 0x00 */ U8 Port; /* 0x01 */ U8 PortWidth; /* 0x02 */ U8 Primitive; /* 0x03 */ } MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, Mpi2EventDataSasBroadcastPrimitive_t, MPI2_POINTER pMpi2EventDataSasBroadcastPrimitive_t; /* defines for the Primitive field */ #define MPI2_EVENT_PRIMITIVE_CHANGE (0x01) #define MPI2_EVENT_PRIMITIVE_SES (0x02) #define MPI2_EVENT_PRIMITIVE_EXPANDER (0x03) #define MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT (0x04) #define MPI2_EVENT_PRIMITIVE_RESERVED3 (0x05) #define MPI2_EVENT_PRIMITIVE_RESERVED4 (0x06) #define MPI2_EVENT_PRIMITIVE_CHANGE0_RESERVED (0x07) #define MPI2_EVENT_PRIMITIVE_CHANGE1_RESERVED (0x08) /* SAS Initiator Device Status Change Event data */ typedef struct _MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE { U8 ReasonCode; /* 0x00 */ U8 PhysicalPort; /* 0x01 */ U16 DevHandle; /* 0x02 */ U64 SASAddress; /* 0x04 */ } MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, Mpi2EventDataSasInitDevStatusChange_t, MPI2_POINTER pMpi2EventDataSasInitDevStatusChange_t; /* SAS Initiator Device Status Change event ReasonCode values */ #define MPI2_EVENT_SAS_INIT_RC_ADDED (0x01) #define MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING (0x02) /* SAS Initiator Device Table Overflow Event data */ typedef struct _MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW { U16 MaxInit; /* 0x00 */ U16 CurrentInit; /* 0x02 */ U64 SASAddress; /* 0x04 */ } MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, Mpi2EventDataSasInitTableOverflow_t, MPI2_POINTER pMpi2EventDataSasInitTableOverflow_t; /* SAS Topology Change List Event data */ /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check NumEntries at runtime. */ #ifndef MPI2_EVENT_SAS_TOPO_PHY_COUNT #define MPI2_EVENT_SAS_TOPO_PHY_COUNT (1) #endif typedef struct _MPI2_EVENT_SAS_TOPO_PHY_ENTRY { U16 AttachedDevHandle; /* 0x00 */ U8 LinkRate; /* 0x02 */ U8 PhyStatus; /* 0x03 */ } MPI2_EVENT_SAS_TOPO_PHY_ENTRY, MPI2_POINTER PTR_MPI2_EVENT_SAS_TOPO_PHY_ENTRY, Mpi2EventSasTopoPhyEntry_t, MPI2_POINTER pMpi2EventSasTopoPhyEntry_t; typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST { U16 EnclosureHandle; /* 0x00 */ U16 ExpanderDevHandle; /* 0x02 */ U8 NumPhys; /* 0x04 */ U8 Reserved1; /* 0x05 */ U16 Reserved2; /* 0x06 */ U8 NumEntries; /* 0x08 */ U8 StartPhyNum; /* 0x09 */ U8 ExpStatus; /* 0x0A */ U8 PhysicalPort; /* 0x0B */ MPI2_EVENT_SAS_TOPO_PHY_ENTRY PHY[MPI2_EVENT_SAS_TOPO_PHY_COUNT]; /* 0x0C*/ } MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, Mpi2EventDataSasTopologyChangeList_t, MPI2_POINTER pMpi2EventDataSasTopologyChangeList_t; /* values for the ExpStatus field */ #define MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER (0x00) #define MPI2_EVENT_SAS_TOPO_ES_ADDED (0x01) #define MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING (0x02) #define MPI2_EVENT_SAS_TOPO_ES_RESPONDING (0x03) #define MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING (0x04) /* defines for the LinkRate field */ #define MPI2_EVENT_SAS_TOPO_LR_CURRENT_MASK (0xF0) #define MPI2_EVENT_SAS_TOPO_LR_CURRENT_SHIFT (4) #define MPI2_EVENT_SAS_TOPO_LR_PREV_MASK (0x0F) #define MPI2_EVENT_SAS_TOPO_LR_PREV_SHIFT (0) #define MPI2_EVENT_SAS_TOPO_LR_UNKNOWN_LINK_RATE (0x00) #define MPI2_EVENT_SAS_TOPO_LR_PHY_DISABLED (0x01) #define MPI2_EVENT_SAS_TOPO_LR_NEGOTIATION_FAILED (0x02) #define MPI2_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE (0x03) #define MPI2_EVENT_SAS_TOPO_LR_PORT_SELECTOR (0x04) #define MPI2_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS (0x05) #define MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY (0x06) #define MPI2_EVENT_SAS_TOPO_LR_RATE_1_5 (0x08) #define MPI2_EVENT_SAS_TOPO_LR_RATE_3_0 (0x09) #define MPI2_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0A) /* values for the PhyStatus field */ #define MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT (0x80) #define MPI2_EVENT_SAS_TOPO_PS_MULTIPLEX_CHANGE (0x10) /* values for the PhyStatus ReasonCode sub-field */ #define MPI2_EVENT_SAS_TOPO_RC_MASK (0x0F) #define MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED (0x01) #define MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING (0x02) #define MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED (0x03) #define MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE (0x04) #define MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING (0x05) /* SAS Enclosure Device Status Change Event data */ typedef struct _MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE { U16 EnclosureHandle; /* 0x00 */ U8 ReasonCode; /* 0x02 */ U8 PhysicalPort; /* 0x03 */ U64 EnclosureLogicalID; /* 0x04 */ U16 NumSlots; /* 0x0C */ U16 StartSlot; /* 0x0E */ U32 PhyBits; /* 0x10 */ } MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE, MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE, Mpi2EventDataSasEnclDevStatusChange_t, MPI2_POINTER pMpi2EventDataSasEnclDevStatusChange_t; /* SAS Enclosure Device Status Change event ReasonCode values */ #define MPI2_EVENT_SAS_ENCL_RC_ADDED (0x01) #define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING (0x02) /* SAS PHY Counter Event data */ typedef struct _MPI2_EVENT_DATA_SAS_PHY_COUNTER { U64 TimeStamp; /* 0x00 */ U32 Reserved1; /* 0x08 */ U8 PhyEventCode; /* 0x0C */ U8 PhyNum; /* 0x0D */ U16 Reserved2; /* 0x0E */ U32 PhyEventInfo; /* 0x10 */ U8 CounterType; /* 0x14 */ U8 ThresholdWindow; /* 0x15 */ U8 TimeUnits; /* 0x16 */ U8 Reserved3; /* 0x17 */ U32 EventThreshold; /* 0x18 */ U16 ThresholdFlags; /* 0x1C */ U16 Reserved4; /* 0x1E */ } MPI2_EVENT_DATA_SAS_PHY_COUNTER, MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_PHY_COUNTER, Mpi2EventDataSasPhyCounter_t, MPI2_POINTER pMpi2EventDataSasPhyCounter_t; /* use MPI2_SASPHY3_EVENT_CODE_ values from mpi2_cnfg.h for the PhyEventCode field */ /* use MPI2_SASPHY3_COUNTER_TYPE_ values from mpi2_cnfg.h for the CounterType field */ /* use MPI2_SASPHY3_TIME_UNITS_ values from mpi2_cnfg.h for the TimeUnits field */ /* use MPI2_SASPHY3_TFLAGS_ values from mpi2_cnfg.h for the ThresholdFlags field */ /* SAS Quiesce Event data */ typedef struct _MPI2_EVENT_DATA_SAS_QUIESCE { U8 ReasonCode; /* 0x00 */ U8 Reserved1; /* 0x01 */ U16 Reserved2; /* 0x02 */ U32 Reserved3; /* 0x04 */ } MPI2_EVENT_DATA_SAS_QUIESCE, MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_QUIESCE, Mpi2EventDataSasQuiesce_t, MPI2_POINTER pMpi2EventDataSasQuiesce_t; /* SAS Quiesce Event data ReasonCode values */ #define MPI2_EVENT_SAS_QUIESCE_RC_STARTED (0x01) #define MPI2_EVENT_SAS_QUIESCE_RC_COMPLETED (0x02) /* Host Based Discovery Phy Event data */ typedef struct _MPI2_EVENT_HBD_PHY_SAS { U8 Flags; /* 0x00 */ U8 NegotiatedLinkRate; /* 0x01 */ U8 PhyNum; /* 0x02 */ U8 PhysicalPort; /* 0x03 */ U32 Reserved1; /* 0x04 */ U8 InitialFrame[28]; /* 0x08 */ } MPI2_EVENT_HBD_PHY_SAS, MPI2_POINTER PTR_MPI2_EVENT_HBD_PHY_SAS, Mpi2EventHbdPhySas_t, MPI2_POINTER pMpi2EventHbdPhySas_t; /* values for the Flags field */ #define MPI2_EVENT_HBD_SAS_FLAGS_FRAME_VALID (0x02) #define MPI2_EVENT_HBD_SAS_FLAGS_SATA_FRAME (0x01) /* use MPI2_SAS_NEG_LINK_RATE_ defines from mpi2_cnfg.h for the NegotiatedLinkRate field */ typedef union _MPI2_EVENT_HBD_DESCRIPTOR { MPI2_EVENT_HBD_PHY_SAS Sas; } MPI2_EVENT_HBD_DESCRIPTOR, MPI2_POINTER PTR_MPI2_EVENT_HBD_DESCRIPTOR, Mpi2EventHbdDescriptor_t, MPI2_POINTER pMpi2EventHbdDescriptor_t; typedef struct _MPI2_EVENT_DATA_HBD_PHY { U8 DescriptorType; /* 0x00 */ U8 Reserved1; /* 0x01 */ U16 Reserved2; /* 0x02 */ U32 Reserved3; /* 0x04 */ MPI2_EVENT_HBD_DESCRIPTOR Descriptor; /* 0x08 */ } MPI2_EVENT_DATA_HBD_PHY, MPI2_POINTER PTR_MPI2_EVENT_DATA_HBD_PHY, Mpi2EventDataHbdPhy_t, MPI2_POINTER pMpi2EventDataMpi2EventDataHbdPhy_t; /* values for the DescriptorType field */ #define MPI2_EVENT_HBD_DT_SAS (0x01) /**************************************************************************** * EventAck message ****************************************************************************/ /* EventAck Request message */ typedef struct _MPI2_EVENT_ACK_REQUEST { U16 Reserved1; /* 0x00 */ U8 ChainOffset; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved2; /* 0x04 */ U8 Reserved3; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved4; /* 0x0A */ U16 Event; /* 0x0C */ U16 Reserved5; /* 0x0E */ U32 EventContext; /* 0x10 */ } MPI2_EVENT_ACK_REQUEST, MPI2_POINTER PTR_MPI2_EVENT_ACK_REQUEST, Mpi2EventAckRequest_t, MPI2_POINTER pMpi2EventAckRequest_t; /* EventAck Reply message */ typedef struct _MPI2_EVENT_ACK_REPLY { U16 Reserved1; /* 0x00 */ U8 MsgLength; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved2; /* 0x04 */ U8 Reserved3; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved4; /* 0x0A */ U16 Reserved5; /* 0x0C */ U16 IOCStatus; /* 0x0E */ U32 IOCLogInfo; /* 0x10 */ } MPI2_EVENT_ACK_REPLY, MPI2_POINTER PTR_MPI2_EVENT_ACK_REPLY, Mpi2EventAckReply_t, MPI2_POINTER pMpi2EventAckReply_t; /**************************************************************************** * FWDownload message ****************************************************************************/ /* FWDownload Request message */ typedef struct _MPI2_FW_DOWNLOAD_REQUEST { U8 ImageType; /* 0x00 */ U8 Reserved1; /* 0x01 */ U8 ChainOffset; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved2; /* 0x04 */ U8 Reserved3; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved4; /* 0x0A */ U32 TotalImageSize; /* 0x0C */ U32 Reserved5; /* 0x10 */ MPI2_MPI_SGE_UNION SGL; /* 0x14 */ } MPI2_FW_DOWNLOAD_REQUEST, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_REQUEST, Mpi2FWDownloadRequest, MPI2_POINTER pMpi2FWDownloadRequest; #define MPI2_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT (0x01) #define MPI2_FW_DOWNLOAD_ITYPE_FW (0x01) #define MPI2_FW_DOWNLOAD_ITYPE_BIOS (0x02) #define MPI2_FW_DOWNLOAD_ITYPE_MANUFACTURING (0x06) #define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_1 (0x07) #define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_2 (0x08) #define MPI2_FW_DOWNLOAD_ITYPE_MEGARAID (0x09) #define MPI2_FW_DOWNLOAD_ITYPE_COMPLETE (0x0A) #define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) #define MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC (0xF0) /* FWDownload TransactionContext Element */ typedef struct _MPI2_FW_DOWNLOAD_TCSGE { U8 Reserved1; /* 0x00 */ U8 ContextSize; /* 0x01 */ U8 DetailsLength; /* 0x02 */ U8 Flags; /* 0x03 */ U32 Reserved2; /* 0x04 */ U32 ImageOffset; /* 0x08 */ U32 ImageSize; /* 0x0C */ } MPI2_FW_DOWNLOAD_TCSGE, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_TCSGE, Mpi2FWDownloadTCSGE_t, MPI2_POINTER pMpi2FWDownloadTCSGE_t; /* FWDownload Reply message */ typedef struct _MPI2_FW_DOWNLOAD_REPLY { U8 ImageType; /* 0x00 */ U8 Reserved1; /* 0x01 */ U8 MsgLength; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved2; /* 0x04 */ U8 Reserved3; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved4; /* 0x0A */ U16 Reserved5; /* 0x0C */ U16 IOCStatus; /* 0x0E */ U32 IOCLogInfo; /* 0x10 */ } MPI2_FW_DOWNLOAD_REPLY, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_REPLY, Mpi2FWDownloadReply_t, MPI2_POINTER pMpi2FWDownloadReply_t; /**************************************************************************** * FWUpload message ****************************************************************************/ /* FWUpload Request message */ typedef struct _MPI2_FW_UPLOAD_REQUEST { U8 ImageType; /* 0x00 */ U8 Reserved1; /* 0x01 */ U8 ChainOffset; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved2; /* 0x04 */ U8 Reserved3; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved4; /* 0x0A */ U32 Reserved5; /* 0x0C */ U32 Reserved6; /* 0x10 */ MPI2_MPI_SGE_UNION SGL; /* 0x14 */ } MPI2_FW_UPLOAD_REQUEST, MPI2_POINTER PTR_MPI2_FW_UPLOAD_REQUEST, Mpi2FWUploadRequest_t, MPI2_POINTER pMpi2FWUploadRequest_t; #define MPI2_FW_UPLOAD_ITYPE_FW_CURRENT (0x00) #define MPI2_FW_UPLOAD_ITYPE_FW_FLASH (0x01) #define MPI2_FW_UPLOAD_ITYPE_BIOS_FLASH (0x02) #define MPI2_FW_UPLOAD_ITYPE_FW_BACKUP (0x05) #define MPI2_FW_UPLOAD_ITYPE_MANUFACTURING (0x06) #define MPI2_FW_UPLOAD_ITYPE_CONFIG_1 (0x07) #define MPI2_FW_UPLOAD_ITYPE_CONFIG_2 (0x08) #define MPI2_FW_UPLOAD_ITYPE_MEGARAID (0x09) #define MPI2_FW_UPLOAD_ITYPE_COMPLETE (0x0A) #define MPI2_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) typedef struct _MPI2_FW_UPLOAD_TCSGE { U8 Reserved1; /* 0x00 */ U8 ContextSize; /* 0x01 */ U8 DetailsLength; /* 0x02 */ U8 Flags; /* 0x03 */ U32 Reserved2; /* 0x04 */ U32 ImageOffset; /* 0x08 */ U32 ImageSize; /* 0x0C */ } MPI2_FW_UPLOAD_TCSGE, MPI2_POINTER PTR_MPI2_FW_UPLOAD_TCSGE, Mpi2FWUploadTCSGE_t, MPI2_POINTER pMpi2FWUploadTCSGE_t; /* FWUpload Reply message */ typedef struct _MPI2_FW_UPLOAD_REPLY { U8 ImageType; /* 0x00 */ U8 Reserved1; /* 0x01 */ U8 MsgLength; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved2; /* 0x04 */ U8 Reserved3; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved4; /* 0x0A */ U16 Reserved5; /* 0x0C */ U16 IOCStatus; /* 0x0E */ U32 IOCLogInfo; /* 0x10 */ U32 ActualImageSize; /* 0x14 */ } MPI2_FW_UPLOAD_REPLY, MPI2_POINTER PTR_MPI2_FW_UPLOAD_REPLY, Mpi2FWUploadReply_t, MPI2_POINTER pMPi2FWUploadReply_t; /* FW Image Header */ typedef struct _MPI2_FW_IMAGE_HEADER { U32 Signature; /* 0x00 */ U32 Signature0; /* 0x04 */ U32 Signature1; /* 0x08 */ U32 Signature2; /* 0x0C */ MPI2_VERSION_UNION MPIVersion; /* 0x10 */ MPI2_VERSION_UNION FWVersion; /* 0x14 */ MPI2_VERSION_UNION NVDATAVersion; /* 0x18 */ MPI2_VERSION_UNION PackageVersion; /* 0x1C */ U16 VendorID; /* 0x20 */ U16 ProductID; /* 0x22 */ U16 ProtocolFlags; /* 0x24 */ U16 Reserved26; /* 0x26 */ U32 IOCCapabilities; /* 0x28 */ U32 ImageSize; /* 0x2C */ U32 NextImageHeaderOffset; /* 0x30 */ U32 Checksum; /* 0x34 */ U32 Reserved38; /* 0x38 */ U32 Reserved3C; /* 0x3C */ U32 Reserved40; /* 0x40 */ U32 Reserved44; /* 0x44 */ U32 Reserved48; /* 0x48 */ U32 Reserved4C; /* 0x4C */ U32 Reserved50; /* 0x50 */ U32 Reserved54; /* 0x54 */ U32 Reserved58; /* 0x58 */ U32 Reserved5C; /* 0x5C */ U32 Reserved60; /* 0x60 */ U32 FirmwareVersionNameWhat; /* 0x64 */ U8 FirmwareVersionName[32]; /* 0x68 */ U32 VendorNameWhat; /* 0x88 */ U8 VendorName[32]; /* 0x8C */ U32 PackageNameWhat; /* 0x88 */ U8 PackageName[32]; /* 0x8C */ U32 ReservedD0; /* 0xD0 */ U32 ReservedD4; /* 0xD4 */ U32 ReservedD8; /* 0xD8 */ U32 ReservedDC; /* 0xDC */ U32 ReservedE0; /* 0xE0 */ U32 ReservedE4; /* 0xE4 */ U32 ReservedE8; /* 0xE8 */ U32 ReservedEC; /* 0xEC */ U32 ReservedF0; /* 0xF0 */ U32 ReservedF4; /* 0xF4 */ U32 ReservedF8; /* 0xF8 */ U32 ReservedFC; /* 0xFC */ } MPI2_FW_IMAGE_HEADER, MPI2_POINTER PTR_MPI2_FW_IMAGE_HEADER, Mpi2FWImageHeader_t, MPI2_POINTER pMpi2FWImageHeader_t; /* Signature field */ #define MPI2_FW_HEADER_SIGNATURE_OFFSET (0x00) #define MPI2_FW_HEADER_SIGNATURE_MASK (0xFF000000) #define MPI2_FW_HEADER_SIGNATURE (0xEA000000) /* Signature0 field */ #define MPI2_FW_HEADER_SIGNATURE0_OFFSET (0x04) #define MPI2_FW_HEADER_SIGNATURE0 (0x5AFAA55A) /* Signature1 field */ #define MPI2_FW_HEADER_SIGNATURE1_OFFSET (0x08) #define MPI2_FW_HEADER_SIGNATURE1 (0xA55AFAA5) /* Signature2 field */ #define MPI2_FW_HEADER_SIGNATURE2_OFFSET (0x0C) #define MPI2_FW_HEADER_SIGNATURE2 (0x5AA55AFA) /* defines for using the ProductID field */ #define MPI2_FW_HEADER_PID_TYPE_MASK (0xF000) #define MPI2_FW_HEADER_PID_TYPE_SAS (0x2000) #define MPI2_FW_HEADER_PID_PROD_MASK (0x0F00) #define MPI2_FW_HEADER_PID_PROD_A (0x0000) #define MPI2_FW_HEADER_PID_PROD_TARGET_INITIATOR_SCSI (0x0200) #define MPI2_FW_HEADER_PID_PROD_IR_SCSI (0x0700) #define MPI2_FW_HEADER_PID_FAMILY_MASK (0x00FF) /* SAS */ #define MPI2_FW_HEADER_PID_FAMILY_2108_SAS (0x0013) #define MPI2_FW_HEADER_PID_FAMILY_2208_SAS (0x0014) /* use MPI2_IOCFACTS_PROTOCOL_ defines for ProtocolFlags field */ /* use MPI2_IOCFACTS_CAPABILITY_ defines for IOCCapabilities field */ #define MPI2_FW_HEADER_IMAGESIZE_OFFSET (0x2C) #define MPI2_FW_HEADER_NEXTIMAGE_OFFSET (0x30) #define MPI2_FW_HEADER_VERNMHWAT_OFFSET (0x64) #define MPI2_FW_HEADER_WHAT_SIGNATURE (0x29232840) #define MPI2_FW_HEADER_SIZE (0x100) /* Extended Image Header */ typedef struct _MPI2_EXT_IMAGE_HEADER { U8 ImageType; /* 0x00 */ U8 Reserved1; /* 0x01 */ U16 Reserved2; /* 0x02 */ U32 Checksum; /* 0x04 */ U32 ImageSize; /* 0x08 */ U32 NextImageHeaderOffset; /* 0x0C */ U32 PackageVersion; /* 0x10 */ U32 Reserved3; /* 0x14 */ U32 Reserved4; /* 0x18 */ U32 Reserved5; /* 0x1C */ U8 IdentifyString[32]; /* 0x20 */ } MPI2_EXT_IMAGE_HEADER, MPI2_POINTER PTR_MPI2_EXT_IMAGE_HEADER, Mpi2ExtImageHeader_t, MPI2_POINTER pMpi2ExtImageHeader_t; /* useful offsets */ #define MPI2_EXT_IMAGE_IMAGETYPE_OFFSET (0x00) #define MPI2_EXT_IMAGE_IMAGESIZE_OFFSET (0x08) #define MPI2_EXT_IMAGE_NEXTIMAGE_OFFSET (0x0C) #define MPI2_EXT_IMAGE_HEADER_SIZE (0x40) /* defines for the ImageType field */ #define MPI2_EXT_IMAGE_TYPE_UNSPECIFIED (0x00) #define MPI2_EXT_IMAGE_TYPE_FW (0x01) #define MPI2_EXT_IMAGE_TYPE_NVDATA (0x03) #define MPI2_EXT_IMAGE_TYPE_BOOTLOADER (0x04) #define MPI2_EXT_IMAGE_TYPE_INITIALIZATION (0x05) #define MPI2_EXT_IMAGE_TYPE_FLASH_LAYOUT (0x06) #define MPI2_EXT_IMAGE_TYPE_SUPPORTED_DEVICES (0x07) #define MPI2_EXT_IMAGE_TYPE_MEGARAID (0x08) #define MPI2_EXT_IMAGE_TYPE_MAX (MPI2_EXT_IMAGE_TYPE_MEGARAID) /* FLASH Layout Extended Image Data */ /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check RegionsPerLayout at runtime. */ #ifndef MPI2_FLASH_NUMBER_OF_REGIONS #define MPI2_FLASH_NUMBER_OF_REGIONS (1) #endif /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check NumberOfLayouts at runtime. */ #ifndef MPI2_FLASH_NUMBER_OF_LAYOUTS #define MPI2_FLASH_NUMBER_OF_LAYOUTS (1) #endif typedef struct _MPI2_FLASH_REGION { U8 RegionType; /* 0x00 */ U8 Reserved1; /* 0x01 */ U16 Reserved2; /* 0x02 */ U32 RegionOffset; /* 0x04 */ U32 RegionSize; /* 0x08 */ U32 Reserved3; /* 0x0C */ } MPI2_FLASH_REGION, MPI2_POINTER PTR_MPI2_FLASH_REGION, Mpi2FlashRegion_t, MPI2_POINTER pMpi2FlashRegion_t; typedef struct _MPI2_FLASH_LAYOUT { U32 FlashSize; /* 0x00 */ U32 Reserved1; /* 0x04 */ U32 Reserved2; /* 0x08 */ U32 Reserved3; /* 0x0C */ MPI2_FLASH_REGION Region[MPI2_FLASH_NUMBER_OF_REGIONS];/* 0x10 */ } MPI2_FLASH_LAYOUT, MPI2_POINTER PTR_MPI2_FLASH_LAYOUT, Mpi2FlashLayout_t, MPI2_POINTER pMpi2FlashLayout_t; typedef struct _MPI2_FLASH_LAYOUT_DATA { U8 ImageRevision; /* 0x00 */ U8 Reserved1; /* 0x01 */ U8 SizeOfRegion; /* 0x02 */ U8 Reserved2; /* 0x03 */ U16 NumberOfLayouts; /* 0x04 */ U16 RegionsPerLayout; /* 0x06 */ U16 MinimumSectorAlignment; /* 0x08 */ U16 Reserved3; /* 0x0A */ U32 Reserved4; /* 0x0C */ MPI2_FLASH_LAYOUT Layout[MPI2_FLASH_NUMBER_OF_LAYOUTS];/* 0x10 */ } MPI2_FLASH_LAYOUT_DATA, MPI2_POINTER PTR_MPI2_FLASH_LAYOUT_DATA, Mpi2FlashLayoutData_t, MPI2_POINTER pMpi2FlashLayoutData_t; /* defines for the RegionType field */ #define MPI2_FLASH_REGION_UNUSED (0x00) #define MPI2_FLASH_REGION_FIRMWARE (0x01) #define MPI2_FLASH_REGION_BIOS (0x02) #define MPI2_FLASH_REGION_NVDATA (0x03) #define MPI2_FLASH_REGION_FIRMWARE_BACKUP (0x05) #define MPI2_FLASH_REGION_MFG_INFORMATION (0x06) #define MPI2_FLASH_REGION_CONFIG_1 (0x07) #define MPI2_FLASH_REGION_CONFIG_2 (0x08) #define MPI2_FLASH_REGION_MEGARAID (0x09) #define MPI2_FLASH_REGION_INIT (0x0A) /* ImageRevision */ #define MPI2_FLASH_LAYOUT_IMAGE_REVISION (0x00) /* Supported Devices Extended Image Data */ /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check NumberOfDevices at runtime. */ #ifndef MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES #define MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES (1) #endif typedef struct _MPI2_SUPPORTED_DEVICE { U16 DeviceID; /* 0x00 */ U16 VendorID; /* 0x02 */ U16 DeviceIDMask; /* 0x04 */ U16 Reserved1; /* 0x06 */ U8 LowPCIRev; /* 0x08 */ U8 HighPCIRev; /* 0x09 */ U16 Reserved2; /* 0x0A */ U32 Reserved3; /* 0x0C */ } MPI2_SUPPORTED_DEVICE, MPI2_POINTER PTR_MPI2_SUPPORTED_DEVICE, Mpi2SupportedDevice_t, MPI2_POINTER pMpi2SupportedDevice_t; typedef struct _MPI2_SUPPORTED_DEVICES_DATA { U8 ImageRevision; /* 0x00 */ U8 Reserved1; /* 0x01 */ U8 NumberOfDevices; /* 0x02 */ U8 Reserved2; /* 0x03 */ U32 Reserved3; /* 0x04 */ MPI2_SUPPORTED_DEVICE SupportedDevice[MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES]; /* 0x08 */ } MPI2_SUPPORTED_DEVICES_DATA, MPI2_POINTER PTR_MPI2_SUPPORTED_DEVICES_DATA, Mpi2SupportedDevicesData_t, MPI2_POINTER pMpi2SupportedDevicesData_t; /* ImageRevision */ #define MPI2_SUPPORTED_DEVICES_IMAGE_REVISION (0x00) /* Init Extended Image Data */ typedef struct _MPI2_INIT_IMAGE_FOOTER { U32 BootFlags; /* 0x00 */ U32 ImageSize; /* 0x04 */ U32 Signature0; /* 0x08 */ U32 Signature1; /* 0x0C */ U32 Signature2; /* 0x10 */ U32 ResetVector; /* 0x14 */ } MPI2_INIT_IMAGE_FOOTER, MPI2_POINTER PTR_MPI2_INIT_IMAGE_FOOTER, Mpi2InitImageFooter_t, MPI2_POINTER pMpi2InitImageFooter_t; /* defines for the BootFlags field */ #define MPI2_INIT_IMAGE_BOOTFLAGS_OFFSET (0x00) /* defines for the ImageSize field */ #define MPI2_INIT_IMAGE_IMAGESIZE_OFFSET (0x04) /* defines for the Signature0 field */ #define MPI2_INIT_IMAGE_SIGNATURE0_OFFSET (0x08) #define MPI2_INIT_IMAGE_SIGNATURE0 (0x5AA55AEA) /* defines for the Signature1 field */ #define MPI2_INIT_IMAGE_SIGNATURE1_OFFSET (0x0C) #define MPI2_INIT_IMAGE_SIGNATURE1 (0xA55AEAA5) /* defines for the Signature2 field */ #define MPI2_INIT_IMAGE_SIGNATURE2_OFFSET (0x10) #define MPI2_INIT_IMAGE_SIGNATURE2 (0x5AEAA55A) /* Signature fields as individual bytes */ #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_0 (0xEA) #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_1 (0x5A) #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_2 (0xA5) #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_3 (0x5A) #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_4 (0xA5) #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_5 (0xEA) #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_6 (0x5A) #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_7 (0xA5) #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_8 (0x5A) #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_9 (0xA5) #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_A (0xEA) #define MPI2_INIT_IMAGE_SIGNATURE_BYTE_B (0x5A) /* defines for the ResetVector field */ #define MPI2_INIT_IMAGE_RESETVECTOR_OFFSET (0x14) /**************************************************************************** * PowerManagementControl message ****************************************************************************/ /* PowerManagementControl Request message */ typedef struct _MPI2_PWR_MGMT_CONTROL_REQUEST { U8 Feature; /* 0x00 */ U8 Reserved1; /* 0x01 */ U8 ChainOffset; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved2; /* 0x04 */ U8 Reserved3; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved4; /* 0x0A */ U8 Parameter1; /* 0x0C */ U8 Parameter2; /* 0x0D */ U8 Parameter3; /* 0x0E */ U8 Parameter4; /* 0x0F */ U32 Reserved5; /* 0x10 */ U32 Reserved6; /* 0x14 */ } MPI2_PWR_MGMT_CONTROL_REQUEST, MPI2_POINTER PTR_MPI2_PWR_MGMT_CONTROL_REQUEST, Mpi2PwrMgmtControlRequest_t, MPI2_POINTER pMpi2PwrMgmtControlRequest_t; /* defines for the Feature field */ #define MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND (0x01) #define MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION (0x02) #define MPI2_PM_CONTROL_FEATURE_PCIE_LINK (0x03) #define MPI2_PM_CONTROL_FEATURE_IOC_SPEED (0x04) #define MPI2_PM_CONTROL_FEATURE_MIN_PRODUCT_SPECIFIC (0x80) #define MPI2_PM_CONTROL_FEATURE_MAX_PRODUCT_SPECIFIC (0xFF) /* parameter usage for the MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND Feature */ /* Parameter1 contains a PHY number */ /* Parameter2 indicates power condition action using these defines */ #define MPI2_PM_CONTROL_PARAM2_PARTIAL (0x01) #define MPI2_PM_CONTROL_PARAM2_SLUMBER (0x02) #define MPI2_PM_CONTROL_PARAM2_EXIT_PWR_MGMT (0x03) /* Parameter3 and Parameter4 are reserved */ /* parameter usage for the MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION Feature */ /* Parameter1 contains SAS port width modulation group number */ /* Parameter2 indicates IOC action using these defines */ #define MPI2_PM_CONTROL_PARAM2_REQUEST_OWNERSHIP (0x01) #define MPI2_PM_CONTROL_PARAM2_CHANGE_MODULATION (0x02) #define MPI2_PM_CONTROL_PARAM2_RELINQUISH_OWNERSHIP (0x03) /* Parameter3 indicates desired modulation level using these defines */ #define MPI2_PM_CONTROL_PARAM3_25_PERCENT (0x00) #define MPI2_PM_CONTROL_PARAM3_50_PERCENT (0x01) #define MPI2_PM_CONTROL_PARAM3_75_PERCENT (0x02) #define MPI2_PM_CONTROL_PARAM3_100_PERCENT (0x03) /* Parameter4 is reserved */ /* parameter usage for the MPI2_PM_CONTROL_FEATURE_PCIE_LINK Feature */ /* Parameter1 indicates desired PCIe link speed using these defines */ #define MPI2_PM_CONTROL_PARAM1_PCIE_2_5_GBPS (0x00) #define MPI2_PM_CONTROL_PARAM1_PCIE_5_0_GBPS (0x01) #define MPI2_PM_CONTROL_PARAM1_PCIE_8_0_GBPS (0x02) /* Parameter2 indicates desired PCIe link width using these defines */ #define MPI2_PM_CONTROL_PARAM2_WIDTH_X1 (0x01) #define MPI2_PM_CONTROL_PARAM2_WIDTH_X2 (0x02) #define MPI2_PM_CONTROL_PARAM2_WIDTH_X4 (0x04) #define MPI2_PM_CONTROL_PARAM2_WIDTH_X8 (0x08) /* Parameter3 and Parameter4 are reserved */ /* parameter usage for the MPI2_PM_CONTROL_FEATURE_IOC_SPEED Feature */ /* Parameter1 indicates desired IOC hardware clock speed using these defines */ #define MPI2_PM_CONTROL_PARAM1_FULL_IOC_SPEED (0x01) #define MPI2_PM_CONTROL_PARAM1_HALF_IOC_SPEED (0x02) #define MPI2_PM_CONTROL_PARAM1_QUARTER_IOC_SPEED (0x04) #define MPI2_PM_CONTROL_PARAM1_EIGHTH_IOC_SPEED (0x08) /* Parameter2, Parameter3, and Parameter4 are reserved */ /* PowerManagementControl Reply message */ typedef struct _MPI2_PWR_MGMT_CONTROL_REPLY { U8 Feature; /* 0x00 */ U8 Reserved1; /* 0x01 */ U8 MsgLength; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved2; /* 0x04 */ U8 Reserved3; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved4; /* 0x0A */ U16 Reserved5; /* 0x0C */ U16 IOCStatus; /* 0x0E */ U32 IOCLogInfo; /* 0x10 */ } MPI2_PWR_MGMT_CONTROL_REPLY, MPI2_POINTER PTR_MPI2_PWR_MGMT_CONTROL_REPLY, Mpi2PwrMgmtControlReply_t, MPI2_POINTER pMpi2PwrMgmtControlReply_t; #endif