/*- * Copyright 2000-2020 Broadcom Inc. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * Broadcom Inc. (LSI) MPT-Fusion Host Adapter FreeBSD */ /* * Copyright 2000-2020 Broadcom Inc. All rights reserved. * * * Name: mpi2_ioc.h * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages * Creation Date: October 11, 2006 * * mpi2_ioc.h Version: 02.00.36 * * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 * prefix are for use only on MPI v2.5 products, and must not be used * with MPI v2.0 products. Unless otherwise noted, names beginning with * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products. * * Version History * --------------- * * Date Version Description * -------- -------- ------------------------------------------------------ * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. * 06-04-07 02.00.01 In IOCFacts Reply structure, renamed MaxDevices to * MaxTargets. * Added TotalImageSize field to FWDownload Request. * Added reserved words to FWUpload Request. * 06-26-07 02.00.02 Added IR Configuration Change List Event. * 08-31-07 02.00.03 Removed SystemReplyQueueDepth field from the IOCInit * request and replaced it with * ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth. * Replaced the MinReplyQueueDepth field of the IOCFacts * reply with MaxReplyDescriptorPostQueueDepth. * Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum * depth for the Reply Descriptor Post Queue. * Added SASAddress field to Initiator Device Table * Overflow Event data. * 10-31-07 02.00.04 Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING * for SAS Initiator Device Status Change Event data. * Modified Reason Code defines for SAS Topology Change * List Event data, including adding a bit for PHY Vacant * status, and adding a mask for the Reason Code. * Added define for * MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING. * Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID. * 12-18-07 02.00.05 Added Boot Status defines for the IOCExceptions field of * the IOCFacts Reply. * Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. * Moved MPI2_VERSION_UNION to mpi2.h. * Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks * instead of enables, and added SASBroadcastPrimitiveMasks * field. * Added Log Entry Added Event and related structure. * 02-29-08 02.00.06 Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID. * Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET. * Added MaxVolumes and MaxPersistentEntries fields to * IOCFacts reply. * Added ProtocalFlags and IOCCapabilities fields to * MPI2_FW_IMAGE_HEADER. * Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT. * 03-03-08 02.00.07 Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to * a U16 (from a U32). * Removed extra 's' from EventMasks name. * 06-27-08 02.00.08 Fixed an offset in a comment. * 10-02-08 02.00.09 Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST. * Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and * renamed MinReplyFrameSize to ReplyFrameSize. * Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX. * Added two new RAIDOperation values for Integrated RAID * Operations Status Event data. * Added four new IR Configuration Change List Event data * ReasonCode values. * Added two new ReasonCode defines for SAS Device Status * Change Event data. * Added three new DiscoveryStatus bits for the SAS * Discovery event data. * Added Multiplexing Status Change bit to the PhyStatus * field of the SAS Topology Change List event data. * Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY. * BootFlags are now product-specific. * Added defines for the indivdual signature bytes * for MPI2_INIT_IMAGE_FOOTER. * 01-19-09 02.00.10 Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define. * Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR * define. * Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE * define. * Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define. * 05-06-09 02.00.11 Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define. * Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define. * Added two new reason codes for SAS Device Status Change * Event. * Added new event: SAS PHY Counter. * 07-30-09 02.00.12 Added GPIO Interrupt event define and structure. * Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. * Added new product id family for 2208. * 10-28-09 02.00.13 Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST. * Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY. * Added MinDevHandle field to MPI2_IOC_FACTS_REPLY. * Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY. * Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define. * Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define. * Added Host Based Discovery Phy Event data. * Added defines for ProductID Product field * (MPI2_FW_HEADER_PID_). * Modified values for SAS ProductID Family * (MPI2_FW_HEADER_PID_FAMILY_). * 02-10-10 02.00.14 Added SAS Quiesce Event structure and defines. * Added PowerManagementControl Request structures and * defines. * 05-12-10 02.00.15 Marked Task Set Full Event as obsolete. * Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define. * 11-10-10 02.00.16 Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC. * 02-23-11 02.00.17 Added SAS NOTIFY Primitive event, and added * SASNotifyPrimitiveMasks field to * MPI2_EVENT_NOTIFICATION_REQUEST. * Added Temperature Threshold Event. * Added Host Message Event. * Added Send Host Message request and reply. * 05-25-11 02.00.18 For Extended Image Header, added * MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC and * MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC defines. * Deprecated MPI2_EXT_IMAGE_TYPE_MAX define. * 08-24-11 02.00.19 Added PhysicalPort field to * MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE structure. * Marked MPI2_PM_CONTROL_FEATURE_PCIE_LINK as obsolete. * 11-18-11 02.00.20 Incorporating additions for MPI v2.5. * 03-29-12 02.00.21 Added a product specific range to event values. * 07-26-12 02.00.22 Added MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE. * Added ElapsedSeconds field to * MPI2_EVENT_DATA_IR_OPERATION_STATUS. * 08-19-13 02.00.23 For IOCInit, added MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE * and MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY. * Added MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE. * Added MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY. * Added Encrypted Hash Extended Image. * 12-05-13 02.00.24 Added MPI25_HASH_IMAGE_TYPE_BIOS. * 11-18-14 02.00.25 Updated copyright information. * 03-16-15 02.00.26 Updated for MPI v2.6. * Added MPI2_EVENT_ACTIVE_CABLE_EXCEPTION and * MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT. * Added MPI2_EVENT_PCIE_LINK_COUNTER and * MPI26_EVENT_DATA_PCIE_LINK_COUNTER. * Added MPI26_CTRL_OP_SHUTDOWN. * Added MPI26_CTRL_OP_LINK_CLEAR_ERROR_LOG * Added MPI26_FW_HEADER_PID_FAMILY_3324_SAS and * MPI26_FW_HEADER_PID_FAMILY_3516_SAS. * 08-25-15 02.00.27 Added IC ARCH Class based signature defines. * Added MPI26_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED event. * Added ConigurationFlags field to IOCInit message to * support NVMe SGL format control. * Added PCIe SRIOV support. * 02-17-16 02.00.28 Added SAS 4 22.5 gbs speed support. * Added PCIe 4 16.0 GT/sec speec support. * Removed AHCI support. * Removed SOP support. * 07-01-16 02.00.29 Added Archclass for 4008 product. * Added IOCException MPI2_IOCFACTS_EXCEPT_PCIE_DISABLED * 08-23-16 02.00.30 Added new defines for the ImageType field of FWDownload * Request Message. * Added new defines for the ImageType field of FWUpload * Request Message. * Added new values for the RegionType field in the Layout * Data sections of the FLASH Layout Extended Image Data. * Added new defines for the ReasonCode field of * Active Cable Exception Event. * Added MPI2_EVENT_ENCL_DEVICE_STATUS_CHANGE and * MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE. * 11-23-16 02.00.31 Added MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR and * MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR. * 02-02-17 02.00.32 Added MPI2_FW_DOWNLOAD_ITYPE_CBB_BACKUP. * Added MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT and related * defines for the ReasonCode field. * 06-13-17 02.00.33 Added MPI2_FW_DOWNLOAD_ITYPE_CPLD. * 09-29-17 02.00.34 Added MPI26_EVENT_PCIDEV_STAT_RC_PCIE_HOT_RESET_FAILED * to the ReasonCode field in PCIe Device Status Change * Event Data. * 07-22-18 02.00.35 Added FW_DOWNLOAD_ITYPE_CPLD and _PSOC. * Moved FW image definitions ionto new mpi2_image,h * 08-14-18 02.00.36 Fixed definition of MPI2_FW_DOWNLOAD_ITYPE_PSOC (0x16) * -------------------------------------------------------------------------- */ #ifndef MPI2_IOC_H #define MPI2_IOC_H /***************************************************************************** * * IOC Messages * *****************************************************************************/ /**************************************************************************** * IOCInit message ****************************************************************************/ /* IOCInit Request message */ typedef struct _MPI2_IOC_INIT_REQUEST { U8 WhoInit; /* 0x00 */ U8 Reserved1; /* 0x01 */ U8 ChainOffset; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved2; /* 0x04 */ U8 Reserved3; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved4; /* 0x0A */ U16 MsgVersion; /* 0x0C */ U16 HeaderVersion; /* 0x0E */ U32 Reserved5; /* 0x10 */ U16 ConfigurationFlags; /* 0x14 */ U8 HostPageSize; /* 0x16 */ U8 HostMSIxVectors; /* 0x17 */ U16 Reserved8; /* 0x18 */ U16 SystemRequestFrameSize; /* 0x1A */ U16 ReplyDescriptorPostQueueDepth; /* 0x1C */ U16 ReplyFreeQueueDepth; /* 0x1E */ U32 SenseBufferAddressHigh; /* 0x20 */ U32 SystemReplyAddressHigh; /* 0x24 */ U64 SystemRequestFrameBaseAddress; /* 0x28 */ U64 ReplyDescriptorPostQueueAddress;/* 0x30 */ U64 ReplyFreeQueueAddress; /* 0x38 */ U64 TimeStamp; /* 0x40 */ } MPI2_IOC_INIT_REQUEST, MPI2_POINTER PTR_MPI2_IOC_INIT_REQUEST, Mpi2IOCInitRequest_t, MPI2_POINTER pMpi2IOCInitRequest_t; /* WhoInit values */ #define MPI2_WHOINIT_NOT_INITIALIZED (0x00) #define MPI2_WHOINIT_SYSTEM_BIOS (0x01) #define MPI2_WHOINIT_ROM_BIOS (0x02) #define MPI2_WHOINIT_PCI_PEER (0x03) #define MPI2_WHOINIT_HOST_DRIVER (0x04) #define MPI2_WHOINIT_MANUFACTURER (0x05) /* MsgFlags */ #define MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE (0x01) /* MsgVersion */ #define MPI2_IOCINIT_MSGVERSION_MAJOR_MASK (0xFF00) #define MPI2_IOCINIT_MSGVERSION_MAJOR_SHIFT (8) #define MPI2_IOCINIT_MSGVERSION_MINOR_MASK (0x00FF) #define MPI2_IOCINIT_MSGVERSION_MINOR_SHIFT (0) /* HeaderVersion */ #define MPI2_IOCINIT_HDRVERSION_UNIT_MASK (0xFF00) #define MPI2_IOCINIT_HDRVERSION_UNIT_SHIFT (8) #define MPI2_IOCINIT_HDRVERSION_DEV_MASK (0x00FF) #define MPI2_IOCINIT_HDRVERSION_DEV_SHIFT (0) /* ConfigurationFlags */ #define MPI26_IOCINIT_CFGFLAGS_NVME_SGL_FORMAT (0x0001) /* minimum depth for a Reply Descriptor Post Queue */ #define MPI2_RDPQ_DEPTH_MIN (16) /* Reply Descriptor Post Queue Array Entry */ typedef struct _MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY { U64 RDPQBaseAddress; /* 0x00 */ U32 Reserved1; /* 0x08 */ U32 Reserved2; /* 0x0C */ } MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY, MPI2_POINTER PTR_MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY, Mpi2IOCInitRDPQArrayEntry, MPI2_POINTER pMpi2IOCInitRDPQArrayEntry; /* IOCInit Reply message */ typedef struct _MPI2_IOC_INIT_REPLY { U8 WhoInit; /* 0x00 */ U8 Reserved1; /* 0x01 */ U8 MsgLength; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved2; /* 0x04 */ U8 Reserved3; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved4; /* 0x0A */ U16 Reserved5; /* 0x0C */ U16 IOCStatus; /* 0x0E */ U32 IOCLogInfo; /* 0x10 */ } MPI2_IOC_INIT_REPLY, MPI2_POINTER PTR_MPI2_IOC_INIT_REPLY, Mpi2IOCInitReply_t, MPI2_POINTER pMpi2IOCInitReply_t; /**************************************************************************** * IOCFacts message ****************************************************************************/ /* IOCFacts Request message */ typedef struct _MPI2_IOC_FACTS_REQUEST { U16 Reserved1; /* 0x00 */ U8 ChainOffset; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved2; /* 0x04 */ U8 Reserved3; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved4; /* 0x0A */ } MPI2_IOC_FACTS_REQUEST, MPI2_POINTER PTR_MPI2_IOC_FACTS_REQUEST, Mpi2IOCFactsRequest_t, MPI2_POINTER pMpi2IOCFactsRequest_t; /* IOCFacts Reply message */ typedef struct _MPI2_IOC_FACTS_REPLY { U16 MsgVersion; /* 0x00 */ U8 MsgLength; /* 0x02 */ U8 Function; /* 0x03 */ U16 HeaderVersion; /* 0x04 */ U8 IOCNumber; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved1; /* 0x0A */ U16 IOCExceptions; /* 0x0C */ U16 IOCStatus; /* 0x0E */ U32 IOCLogInfo; /* 0x10 */ U8 MaxChainDepth; /* 0x14 */ U8 WhoInit; /* 0x15 */ U8 NumberOfPorts; /* 0x16 */ U8 MaxMSIxVectors; /* 0x17 */ U16 RequestCredit; /* 0x18 */ U16 ProductID; /* 0x1A */ U32 IOCCapabilities; /* 0x1C */ MPI2_VERSION_UNION FWVersion; /* 0x20 */ U16 IOCRequestFrameSize; /* 0x24 */ U16 IOCMaxChainSegmentSize; /* 0x26 */ /* MPI 2.5 only; Reserved in MPI 2.0 */ U16 MaxInitiators; /* 0x28 */ U16 MaxTargets; /* 0x2A */ U16 MaxSasExpanders; /* 0x2C */ U16 MaxEnclosures; /* 0x2E */ U16 ProtocolFlags; /* 0x30 */ U16 HighPriorityCredit; /* 0x32 */ U16 MaxReplyDescriptorPostQueueDepth; /* 0x34 */ U8 ReplyFrameSize; /* 0x36 */ U8 MaxVolumes; /* 0x37 */ U16 MaxDevHandle; /* 0x38 */ U16 MaxPersistentEntries; /* 0x3A */ U16 MinDevHandle; /* 0x3C */ U8 CurrentHostPageSize; /* 0x3E */ U8 Reserved4; /* 0x3F */ U8 SGEModifierMask; /* 0x40 */ U8 SGEModifierValue; /* 0x41 */ U8 SGEModifierShift; /* 0x42 */ U8 Reserved5; /* 0x43 */ } MPI2_IOC_FACTS_REPLY, MPI2_POINTER PTR_MPI2_IOC_FACTS_REPLY, Mpi2IOCFactsReply_t, MPI2_POINTER pMpi2IOCFactsReply_t; /* MsgVersion */ #define MPI2_IOCFACTS_MSGVERSION_MAJOR_MASK (0xFF00) #define MPI2_IOCFACTS_MSGVERSION_MAJOR_SHIFT (8) #define MPI2_IOCFACTS_MSGVERSION_MINOR_MASK (0x00FF) #define MPI2_IOCFACTS_MSGVERSION_MINOR_SHIFT (0) /* HeaderVersion */ #define MPI2_IOCFACTS_HDRVERSION_UNIT_MASK (0xFF00) #define MPI2_IOCFACTS_HDRVERSION_UNIT_SHIFT (8) #define MPI2_IOCFACTS_HDRVERSION_DEV_MASK (0x00FF) #define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT (0) /* IOCExceptions */ #define MPI2_IOCFACTS_EXCEPT_PCIE_DISABLED (0x0400) #define MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE (0x0200) #define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX (0x0100) #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x00E0) #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_GOOD (0x0000) #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_BACKUP (0x0020) #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_RESTORED (0x0040) #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_CORRUPT_BACKUP (0x0060) #define MPI2_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED (0x0010) #define MPI2_IOCFACTS_EXCEPT_MANUFACT_CHECKSUM_FAIL (0x0008) #define MPI2_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0004) #define MPI2_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID (0x0002) #define MPI2_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0001) /* defines for WhoInit field are after the IOCInit Request */ /* ProductID field uses MPI2_FW_HEADER_PID_ */ /* IOCCapabilities */ #define MPI26_IOCFACTS_CAPABILITY_PCIE_SRIOV (0x00100000) #define MPI26_IOCFACTS_CAPABILITY_ATOMIC_REQ (0x00080000) #define MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE (0x00040000) #define MPI25_IOCFACTS_CAPABILITY_FAST_PATH_CAPABLE (0x00020000) #define MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY (0x00010000) #define MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX (0x00008000) #define MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR (0x00004000) #define MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY (0x00002000) #define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID (0x00001000) #define MPI2_IOCFACTS_CAPABILITY_TLR (0x00000800) #define MPI2_IOCFACTS_CAPABILITY_MULTICAST (0x00000100) #define MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET (0x00000080) #define MPI2_IOCFACTS_CAPABILITY_EEDP (0x00000040) #define MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER (0x00000020) #define MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER (0x00000010) #define MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER (0x00000008) #define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004) /* ProtocolFlags */ #define MPI2_IOCFACTS_PROTOCOL_NVME_DEVICES (0x0008) /* MPI v2.6 and later */ #define MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002) #define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001) /**************************************************************************** * PortFacts message ****************************************************************************/ /* PortFacts Request message */ typedef struct _MPI2_PORT_FACTS_REQUEST { U16 Reserved1; /* 0x00 */ U8 ChainOffset; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved2; /* 0x04 */ U8 PortNumber; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved3; /* 0x0A */ } MPI2_PORT_FACTS_REQUEST, MPI2_POINTER PTR_MPI2_PORT_FACTS_REQUEST, Mpi2PortFactsRequest_t, MPI2_POINTER pMpi2PortFactsRequest_t; /* PortFacts Reply message */ typedef struct _MPI2_PORT_FACTS_REPLY { U16 Reserved1; /* 0x00 */ U8 MsgLength; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved2; /* 0x04 */ U8 PortNumber; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved3; /* 0x0A */ U16 Reserved4; /* 0x0C */ U16 IOCStatus; /* 0x0E */ U32 IOCLogInfo; /* 0x10 */ U8 Reserved5; /* 0x14 */ U8 PortType; /* 0x15 */ U16 Reserved6; /* 0x16 */ U16 MaxPostedCmdBuffers; /* 0x18 */ U16 Reserved7; /* 0x1A */ } MPI2_PORT_FACTS_REPLY, MPI2_POINTER PTR_MPI2_PORT_FACTS_REPLY, Mpi2PortFactsReply_t, MPI2_POINTER pMpi2PortFactsReply_t; /* PortType values */ #define MPI2_PORTFACTS_PORTTYPE_INACTIVE (0x00) #define MPI2_PORTFACTS_PORTTYPE_FC (0x10) #define MPI2_PORTFACTS_PORTTYPE_ISCSI (0x20) #define MPI2_PORTFACTS_PORTTYPE_SAS_PHYSICAL (0x30) #define MPI2_PORTFACTS_PORTTYPE_SAS_VIRTUAL (0x31) #define MPI2_PORTFACTS_PORTTYPE_TRI_MODE (0x40) /* MPI v2.6 and later */ /**************************************************************************** * PortEnable message ****************************************************************************/ /* PortEnable Request message */ typedef struct _MPI2_PORT_ENABLE_REQUEST { U16 Reserved1; /* 0x00 */ U8 ChainOffset; /* 0x02 */ U8 Function; /* 0x03 */ U8 Reserved2; /* 0x04 */ U8 PortFlags; /* 0x05 */ U8 Reserved3; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved4; /* 0x0A */ } MPI2_PORT_ENABLE_REQUEST, MPI2_POINTER PTR_MPI2_PORT_ENABLE_REQUEST, Mpi2PortEnableRequest_t, MPI2_POINTER pMpi2PortEnableRequest_t; /* PortEnable Reply message */ typedef struct _MPI2_PORT_ENABLE_REPLY { U16 Reserved1; /* 0x00 */ U8 MsgLength; /* 0x02 */ U8 Function; /* 0x03 */ U8 Reserved2; /* 0x04 */ U8 PortFlags; /* 0x05 */ U8 Reserved3; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved4; /* 0x0A */ U16 Reserved5; /* 0x0C */ U16 IOCStatus; /* 0x0E */ U32 IOCLogInfo; /* 0x10 */ } MPI2_PORT_ENABLE_REPLY, MPI2_POINTER PTR_MPI2_PORT_ENABLE_REPLY, Mpi2PortEnableReply_t, MPI2_POINTER pMpi2PortEnableReply_t; /**************************************************************************** * EventNotification message ****************************************************************************/ /* EventNotification Request message */ #define MPI2_EVENT_NOTIFY_EVENTMASK_WORDS (4) typedef struct _MPI2_EVENT_NOTIFICATION_REQUEST { U16 Reserved1; /* 0x00 */ U8 ChainOffset; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved2; /* 0x04 */ U8 Reserved3; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved4; /* 0x0A */ U32 Reserved5; /* 0x0C */ U32 Reserved6; /* 0x10 */ U32 EventMasks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];/* 0x14 */ U16 SASBroadcastPrimitiveMasks; /* 0x24 */ U16 SASNotifyPrimitiveMasks; /* 0x26 */ U32 Reserved8; /* 0x28 */ } MPI2_EVENT_NOTIFICATION_REQUEST, MPI2_POINTER PTR_MPI2_EVENT_NOTIFICATION_REQUEST, Mpi2EventNotificationRequest_t, MPI2_POINTER pMpi2EventNotificationRequest_t; /* EventNotification Reply message */ typedef struct _MPI2_EVENT_NOTIFICATION_REPLY { U16 EventDataLength; /* 0x00 */ U8 MsgLength; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved1; /* 0x04 */ U8 AckRequired; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved2; /* 0x0A */ U16 Reserved3; /* 0x0C */ U16 IOCStatus; /* 0x0E */ U32 IOCLogInfo; /* 0x10 */ U16 Event; /* 0x14 */ U16 Reserved4; /* 0x16 */ U32 EventContext; /* 0x18 */ U32 EventData[1]; /* 0x1C */ } MPI2_EVENT_NOTIFICATION_REPLY, MPI2_POINTER PTR_MPI2_EVENT_NOTIFICATION_REPLY, Mpi2EventNotificationReply_t, MPI2_POINTER pMpi2EventNotificationReply_t; /* AckRequired */ #define MPI2_EVENT_NOTIFICATION_ACK_NOT_REQUIRED (0x00) #define MPI2_EVENT_NOTIFICATION_ACK_REQUIRED (0x01) /* Event */ #define MPI2_EVENT_LOG_DATA (0x0001) #define MPI2_EVENT_STATE_CHANGE (0x0002) #define MPI2_EVENT_HARD_RESET_RECEIVED (0x0005) #define MPI2_EVENT_EVENT_CHANGE (0x000A) #define MPI2_EVENT_TASK_SET_FULL (0x000E) /* obsolete */ #define MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE (0x000F) #define MPI2_EVENT_IR_OPERATION_STATUS (0x0014) #define MPI2_EVENT_SAS_DISCOVERY (0x0016) #define MPI2_EVENT_SAS_BROADCAST_PRIMITIVE (0x0017) #define MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x0018) #define MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW (0x0019) #define MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST (0x001C) #define MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE (0x001D) #define MPI2_EVENT_ENCL_DEVICE_STATUS_CHANGE (0x001D) /* MPI v2.6 and later */ #define MPI2_EVENT_IR_VOLUME (0x001E) #define MPI2_EVENT_IR_PHYSICAL_DISK (0x001F) #define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST (0x0020) #define MPI2_EVENT_LOG_ENTRY_ADDED (0x0021) #define MPI2_EVENT_SAS_PHY_COUNTER (0x0022) #define MPI2_EVENT_GPIO_INTERRUPT (0x0023) #define MPI2_EVENT_HOST_BASED_DISCOVERY_PHY (0x0024) #define MPI2_EVENT_SAS_QUIESCE (0x0025) #define MPI2_EVENT_SAS_NOTIFY_PRIMITIVE (0x0026) #define MPI2_EVENT_TEMP_THRESHOLD (0x0027) #define MPI2_EVENT_HOST_MESSAGE (0x0028) #define MPI2_EVENT_POWER_PERFORMANCE_CHANGE (0x0029) #define MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE (0x0030) /* MPI v2.6 and later */ #define MPI2_EVENT_PCIE_ENUMERATION (0x0031) /* MPI v2.6 and later */ #define MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST (0x0032) /* MPI v2.6 and later */ #define MPI2_EVENT_PCIE_LINK_COUNTER (0x0033) /* MPI v2.6 and later */ #define MPI2_EVENT_ACTIVE_CABLE_EXCEPTION (0x0034) /* MPI v2.6 and later */ #define MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR (0x0035) /* MPI v2.5 and later */ #define MPI2_EVENT_MIN_PRODUCT_SPECIFIC (0x006E) #define MPI2_EVENT_MAX_PRODUCT_SPECIFIC (0x007F) /* Log Entry Added Event data */ /* the following structure matches MPI2_LOG_0_ENTRY in mpi2_cnfg.h */ #define MPI2_EVENT_DATA_LOG_DATA_LENGTH (0x1C) typedef struct _MPI2_EVENT_DATA_LOG_ENTRY_ADDED { U64 TimeStamp; /* 0x00 */ U32 Reserved1; /* 0x08 */ U16 LogSequence; /* 0x0C */ U16 LogEntryQualifier; /* 0x0E */ U8 VP_ID; /* 0x10 */ U8 VF_ID; /* 0x11 */ U16 Reserved2; /* 0x12 */ U8 LogData[MPI2_EVENT_DATA_LOG_DATA_LENGTH];/* 0x14 */ } MPI2_EVENT_DATA_LOG_ENTRY_ADDED, MPI2_POINTER PTR_MPI2_EVENT_DATA_LOG_ENTRY_ADDED, Mpi2EventDataLogEntryAdded_t, MPI2_POINTER pMpi2EventDataLogEntryAdded_t; /* GPIO Interrupt Event data */ typedef struct _MPI2_EVENT_DATA_GPIO_INTERRUPT { U8 GPIONum; /* 0x00 */ U8 Reserved1; /* 0x01 */ U16 Reserved2; /* 0x02 */ } MPI2_EVENT_DATA_GPIO_INTERRUPT, MPI2_POINTER PTR_MPI2_EVENT_DATA_GPIO_INTERRUPT, Mpi2EventDataGpioInterrupt_t, MPI2_POINTER pMpi2EventDataGpioInterrupt_t; /* Temperature Threshold Event data */ typedef struct _MPI2_EVENT_DATA_TEMPERATURE { U16 Status; /* 0x00 */ U8 SensorNum; /* 0x02 */ U8 Reserved1; /* 0x03 */ U16 CurrentTemperature; /* 0x04 */ U16 Reserved2; /* 0x06 */ U32 Reserved3; /* 0x08 */ U32 Reserved4; /* 0x0C */ } MPI2_EVENT_DATA_TEMPERATURE, MPI2_POINTER PTR_MPI2_EVENT_DATA_TEMPERATURE, Mpi2EventDataTemperature_t, MPI2_POINTER pMpi2EventDataTemperature_t; /* Temperature Threshold Event data Status bits */ #define MPI2_EVENT_TEMPERATURE3_EXCEEDED (0x0008) #define MPI2_EVENT_TEMPERATURE2_EXCEEDED (0x0004) #define MPI2_EVENT_TEMPERATURE1_EXCEEDED (0x0002) #define MPI2_EVENT_TEMPERATURE0_EXCEEDED (0x0001) /* Host Message Event data */ typedef struct _MPI2_EVENT_DATA_HOST_MESSAGE { U8 SourceVF_ID; /* 0x00 */ U8 Reserved1; /* 0x01 */ U16 Reserved2; /* 0x02 */ U32 Reserved3; /* 0x04 */ U32 HostData[1]; /* 0x08 */ } MPI2_EVENT_DATA_HOST_MESSAGE, MPI2_POINTER PTR_MPI2_EVENT_DATA_HOST_MESSAGE, Mpi2EventDataHostMessage_t, MPI2_POINTER pMpi2EventDataHostMessage_t; /* Power Performance Change Event data */ typedef struct _MPI2_EVENT_DATA_POWER_PERF_CHANGE { U8 CurrentPowerMode; /* 0x00 */ U8 PreviousPowerMode; /* 0x01 */ U16 Reserved1; /* 0x02 */ } MPI2_EVENT_DATA_POWER_PERF_CHANGE, MPI2_POINTER PTR_MPI2_EVENT_DATA_POWER_PERF_CHANGE, Mpi2EventDataPowerPerfChange_t, MPI2_POINTER pMpi2EventDataPowerPerfChange_t; /* defines for CurrentPowerMode and PreviousPowerMode fields */ #define MPI2_EVENT_PM_INIT_MASK (0xC0) #define MPI2_EVENT_PM_INIT_UNAVAILABLE (0x00) #define MPI2_EVENT_PM_INIT_HOST (0x40) #define MPI2_EVENT_PM_INIT_IO_UNIT (0x80) #define MPI2_EVENT_PM_INIT_PCIE_DPA (0xC0) #define MPI2_EVENT_PM_MODE_MASK (0x07) #define MPI2_EVENT_PM_MODE_UNAVAILABLE (0x00) #define MPI2_EVENT_PM_MODE_UNKNOWN (0x01) #define MPI2_EVENT_PM_MODE_FULL_POWER (0x04) #define MPI2_EVENT_PM_MODE_REDUCED_POWER (0x05) #define MPI2_EVENT_PM_MODE_STANDBY (0x06) /* Active Cable Exception Event data */ typedef struct _MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT { U32 ActiveCablePowerRequirement; /* 0x00 */ U8 ReasonCode; /* 0x04 */ U8 ReceptacleID; /* 0x05 */ U16 Reserved1; /* 0x06 */ } MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT, MPI2_POINTER PTR_MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT, Mpi25EventDataActiveCableExcept_t, MPI2_POINTER pMpi25EventDataActiveCableExcept_t, MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT, MPI2_POINTER PTR_MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT, Mpi26EventDataActiveCableExcept_t, MPI2_POINTER pMpi26EventDataActiveCableExcept_t; /* MPI2.5 defines for the ReasonCode field */ #define MPI25_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER (0x00) #define MPI25_EVENT_ACTIVE_CABLE_PRESENT (0x01) #define MPI25_EVENT_ACTIVE_CABLE_DEGRADED (0x02) /* MPI2.6 defines for the ReasonCode field */ #define MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER (0x00) #define MPI26_EVENT_ACTIVE_CABLE_PRESENT (0x01) #define MPI26_EVENT_ACTIVE_CABLE_DEGRADED (0x02) /* Hard Reset Received Event data */ typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED { U8 Reserved1; /* 0x00 */ U8 Port; /* 0x01 */ U16 Reserved2; /* 0x02 */ } MPI2_EVENT_DATA_HARD_RESET_RECEIVED, MPI2_POINTER PTR_MPI2_EVENT_DATA_HARD_RESET_RECEIVED, Mpi2EventDataHardResetReceived_t, MPI2_POINTER pMpi2EventDataHardResetReceived_t; /* Task Set Full Event data */ /* this event is obsolete */ typedef struct _MPI2_EVENT_DATA_TASK_SET_FULL { U16 DevHandle; /* 0x00 */ U16 CurrentDepth; /* 0x02 */ } MPI2_EVENT_DATA_TASK_SET_FULL, MPI2_POINTER PTR_MPI2_EVENT_DATA_TASK_SET_FULL, Mpi2EventDataTaskSetFull_t, MPI2_POINTER pMpi2EventDataTaskSetFull_t; /* SAS Device Status Change Event data */ typedef struct _MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE { U16 TaskTag; /* 0x00 */ U8 ReasonCode; /* 0x02 */ U8 PhysicalPort; /* 0x03 */ U8 ASC; /* 0x04 */ U8 ASCQ; /* 0x05 */ U16 DevHandle; /* 0x06 */ U32 Reserved2; /* 0x08 */ U64 SASAddress; /* 0x0C */ U8 LUN[8]; /* 0x14 */ } MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, Mpi2EventDataSasDeviceStatusChange_t, MPI2_POINTER pMpi2EventDataSasDeviceStatusChange_t; /* SAS Device Status Change Event data ReasonCode values */ #define MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05) #define MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07) #define MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08) #define MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL (0x09) #define MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A) #define MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B) #define MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C) #define MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION (0x0D) #define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E) #define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F) #define MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE (0x10) #define MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY (0x11) #define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY (0x12) /* Integrated RAID Operation Status Event data */ typedef struct _MPI2_EVENT_DATA_IR_OPERATION_STATUS { U16 VolDevHandle; /* 0x00 */ U16 Reserved1; /* 0x02 */ U8 RAIDOperation; /* 0x04 */ U8 PercentComplete; /* 0x05 */ U16 Reserved2; /* 0x06 */ U32 ElapsedSeconds; /* 0x08 */ } MPI2_EVENT_DATA_IR_OPERATION_STATUS, MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_OPERATION_STATUS, Mpi2EventDataIrOperationStatus_t, MPI2_POINTER pMpi2EventDataIrOperationStatus_t; /* Integrated RAID Operation Status Event data RAIDOperation values */ #define MPI2_EVENT_IR_RAIDOP_RESYNC (0x00) #define MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION (0x01) #define MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK (0x02) #define MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT (0x03) #define MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT (0x04) /* Integrated RAID Volume Event data */ typedef struct _MPI2_EVENT_DATA_IR_VOLUME { U16 VolDevHandle; /* 0x00 */ U8 ReasonCode; /* 0x02 */ U8 Reserved1; /* 0x03 */ U32 NewValue; /* 0x04 */ U32 PreviousValue; /* 0x08 */ } MPI2_EVENT_DATA_IR_VOLUME, MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_VOLUME, Mpi2EventDataIrVolume_t, MPI2_POINTER pMpi2EventDataIrVolume_t; /* Integrated RAID Volume Event data ReasonCode values */ #define MPI2_EVENT_IR_VOLUME_RC_SETTINGS_CHANGED (0x01) #define MPI2_EVENT_IR_VOLUME_RC_STATUS_FLAGS_CHANGED (0x02) #define MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED (0x03) /* Integrated RAID Physical Disk Event data */ typedef struct _MPI2_EVENT_DATA_IR_PHYSICAL_DISK { U16 Reserved1; /* 0x00 */ U8 ReasonCode; /* 0x02 */ U8 PhysDiskNum; /* 0x03 */ U16 PhysDiskDevHandle; /* 0x04 */ U16 Reserved2; /* 0x06 */ U16 Slot; /* 0x08 */ U16 EnclosureHandle; /* 0x0A */ U32 NewValue; /* 0x0C */ U32 PreviousValue; /* 0x10 */ } MPI2_EVENT_DATA_IR_PHYSICAL_DISK, MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_PHYSICAL_DISK, Mpi2EventDataIrPhysicalDisk_t, MPI2_POINTER pMpi2EventDataIrPhysicalDisk_t; /* Integrated RAID Physical Disk Event data ReasonCode values */ #define MPI2_EVENT_IR_PHYSDISK_RC_SETTINGS_CHANGED (0x01) #define MPI2_EVENT_IR_PHYSDISK_RC_STATUS_FLAGS_CHANGED (0x02) #define MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED (0x03) /* Integrated RAID Configuration Change List Event data */ /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check NumElements at runtime. */ #ifndef MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT #define MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT (1) #endif typedef struct _MPI2_EVENT_IR_CONFIG_ELEMENT { U16 ElementFlags; /* 0x00 */ U16 VolDevHandle; /* 0x02 */ U8 ReasonCode; /* 0x04 */ U8 PhysDiskNum; /* 0x05 */ U16 PhysDiskDevHandle; /* 0x06 */ } MPI2_EVENT_IR_CONFIG_ELEMENT, MPI2_POINTER PTR_MPI2_EVENT_IR_CONFIG_ELEMENT, Mpi2EventIrConfigElement_t, MPI2_POINTER pMpi2EventIrConfigElement_t; /* IR Configuration Change List Event data ElementFlags values */ #define MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK (0x000F) #define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT (0x0000) #define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT (0x0001) #define MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT (0x0002) /* IR Configuration Change List Event data ReasonCode values */ #define MPI2_EVENT_IR_CHANGE_RC_ADDED (0x01) #define MPI2_EVENT_IR_CHANGE_RC_REMOVED (0x02) #define MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE (0x03) #define MPI2_EVENT_IR_CHANGE_RC_HIDE (0x04) #define MPI2_EVENT_IR_CHANGE_RC_UNHIDE (0x05) #define MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED (0x06) #define MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED (0x07) #define MPI2_EVENT_IR_CHANGE_RC_PD_CREATED (0x08) #define MPI2_EVENT_IR_CHANGE_RC_PD_DELETED (0x09) typedef struct _MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST { U8 NumElements; /* 0x00 */ U8 Reserved1; /* 0x01 */ U8 Reserved2; /* 0x02 */ U8 ConfigNum; /* 0x03 */ U32 Flags; /* 0x04 */ MPI2_EVENT_IR_CONFIG_ELEMENT ConfigElement[MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT]; /* 0x08 */ } MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST, MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST, Mpi2EventDataIrConfigChangeList_t, MPI2_POINTER pMpi2EventDataIrConfigChangeList_t; /* IR Configuration Change List Event data Flags values */ #define MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG (0x00000001) /* SAS Discovery Event data */ typedef struct _MPI2_EVENT_DATA_SAS_DISCOVERY { U8 Flags; /* 0x00 */ U8 ReasonCode; /* 0x01 */ U8 PhysicalPort; /* 0x02 */ U8 Reserved1; /* 0x03 */ U32 DiscoveryStatus; /* 0x04 */ } MPI2_EVENT_DATA_SAS_DISCOVERY, MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_DISCOVERY, Mpi2EventDataSasDiscovery_t, MPI2_POINTER pMpi2EventDataSasDiscovery_t; /* SAS Discovery Event data Flags values */ #define MPI2_EVENT_SAS_DISC_DEVICE_CHANGE (0x02) #define MPI2_EVENT_SAS_DISC_IN_PROGRESS (0x01) /* SAS Discovery Event data ReasonCode values */ #define MPI2_EVENT_SAS_DISC_RC_STARTED (0x01) #define MPI2_EVENT_SAS_DISC_RC_COMPLETED (0x02) /* SAS Discovery Event data DiscoveryStatus values */ #define MPI2_EVENT_SAS_DISC_DS_MAX_ENCLOSURES_EXCEED (0x80000000) #define MPI2_EVENT_SAS_DISC_DS_MAX_EXPANDERS_EXCEED (0x40000000) #define MPI2_EVENT_SAS_DISC_DS_MAX_DEVICES_EXCEED (0x20000000) #define MPI2_EVENT_SAS_DISC_DS_MAX_TOPO_PHYS_EXCEED (0x10000000) #define MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR (0x08000000) #define MPI2_EVENT_SAS_DISC_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000) #define MPI2_EVENT_SAS_DISC_DS_EXP_MULTI_SUBTRACTIVE (0x00004000) #define MPI2_EVENT_SAS_DISC_DS_MULTI_PORT_DOMAIN (0x00002000) #define MPI2_EVENT_SAS_DISC_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000) #define MPI2_EVENT_SAS_DISC_DS_UNSUPPORTED_DEVICE (0x00000800) #define MPI2_EVENT_SAS_DISC_DS_TABLE_LINK (0x00000400) #define MPI2_EVENT_SAS_DISC_DS_SUBTRACTIVE_LINK (0x00000200) #define MPI2_EVENT_SAS_DISC_DS_SMP_CRC_ERROR (0x00000100) #define MPI2_EVENT_SAS_DISC_DS_SMP_FUNCTION_FAILED (0x00000080) #define MPI2_EVENT_SAS_DISC_DS_INDEX_NOT_EXIST (0x00000040) #define MPI2_EVENT_SAS_DISC_DS_OUT_ROUTE_ENTRIES (0x00000020) #define MPI2_EVENT_SAS_DISC_DS_SMP_TIMEOUT (0x00000010) #define MPI2_EVENT_SAS_DISC_DS_MULTIPLE_PORTS (0x00000004) #define MPI2_EVENT_SAS_DISC_DS_UNADDRESSABLE_DEVICE (0x00000002) #define MPI2_EVENT_SAS_DISC_DS_LOOP_DETECTED (0x00000001) /* SAS Broadcast Primitive Event data */ typedef struct _MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE { U8 PhyNum; /* 0x00 */ U8 Port; /* 0x01 */ U8 PortWidth; /* 0x02 */ U8 Primitive; /* 0x03 */ } MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, Mpi2EventDataSasBroadcastPrimitive_t, MPI2_POINTER pMpi2EventDataSasBroadcastPrimitive_t; /* defines for the Primitive field */ #define MPI2_EVENT_PRIMITIVE_CHANGE (0x01) #define MPI2_EVENT_PRIMITIVE_SES (0x02) #define MPI2_EVENT_PRIMITIVE_EXPANDER (0x03) #define MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT (0x04) #define MPI2_EVENT_PRIMITIVE_RESERVED3 (0x05) #define MPI2_EVENT_PRIMITIVE_RESERVED4 (0x06) #define MPI2_EVENT_PRIMITIVE_CHANGE0_RESERVED (0x07) #define MPI2_EVENT_PRIMITIVE_CHANGE1_RESERVED (0x08) /* SAS Notify Primitive Event data */ typedef struct _MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE { U8 PhyNum; /* 0x00 */ U8 Port; /* 0x01 */ U8 Reserved1; /* 0x02 */ U8 Primitive; /* 0x03 */ } MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE, MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE, Mpi2EventDataSasNotifyPrimitive_t, MPI2_POINTER pMpi2EventDataSasNotifyPrimitive_t; /* defines for the Primitive field */ #define MPI2_EVENT_NOTIFY_ENABLE_SPINUP (0x01) #define MPI2_EVENT_NOTIFY_POWER_LOSS_EXPECTED (0x02) #define MPI2_EVENT_NOTIFY_RESERVED1 (0x03) #define MPI2_EVENT_NOTIFY_RESERVED2 (0x04) /* SAS Initiator Device Status Change Event data */ typedef struct _MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE { U8 ReasonCode; /* 0x00 */ U8 PhysicalPort; /* 0x01 */ U16 DevHandle; /* 0x02 */ U64 SASAddress; /* 0x04 */ } MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, Mpi2EventDataSasInitDevStatusChange_t, MPI2_POINTER pMpi2EventDataSasInitDevStatusChange_t; /* SAS Initiator Device Status Change event ReasonCode values */ #define MPI2_EVENT_SAS_INIT_RC_ADDED (0x01) #define MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING (0x02) /* SAS Initiator Device Table Overflow Event data */ typedef struct _MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW { U16 MaxInit; /* 0x00 */ U16 CurrentInit; /* 0x02 */ U64 SASAddress; /* 0x04 */ } MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, Mpi2EventDataSasInitTableOverflow_t, MPI2_POINTER pMpi2EventDataSasInitTableOverflow_t; /* SAS Topology Change List Event data */ /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check NumEntries at runtime. */ #ifndef MPI2_EVENT_SAS_TOPO_PHY_COUNT #define MPI2_EVENT_SAS_TOPO_PHY_COUNT (1) #endif typedef struct _MPI2_EVENT_SAS_TOPO_PHY_ENTRY { U16 AttachedDevHandle; /* 0x00 */ U8 LinkRate; /* 0x02 */ U8 PhyStatus; /* 0x03 */ } MPI2_EVENT_SAS_TOPO_PHY_ENTRY, MPI2_POINTER PTR_MPI2_EVENT_SAS_TOPO_PHY_ENTRY, Mpi2EventSasTopoPhyEntry_t, MPI2_POINTER pMpi2EventSasTopoPhyEntry_t; typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST { U16 EnclosureHandle; /* 0x00 */ U16 ExpanderDevHandle; /* 0x02 */ U8 NumPhys; /* 0x04 */ U8 Reserved1; /* 0x05 */ U16 Reserved2; /* 0x06 */ U8 NumEntries; /* 0x08 */ U8 StartPhyNum; /* 0x09 */ U8 ExpStatus; /* 0x0A */ U8 PhysicalPort; /* 0x0B */ MPI2_EVENT_SAS_TOPO_PHY_ENTRY PHY[MPI2_EVENT_SAS_TOPO_PHY_COUNT]; /* 0x0C*/ } MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, Mpi2EventDataSasTopologyChangeList_t, MPI2_POINTER pMpi2EventDataSasTopologyChangeList_t; /* values for the ExpStatus field */ #define MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER (0x00) #define MPI2_EVENT_SAS_TOPO_ES_ADDED (0x01) #define MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING (0x02) #define MPI2_EVENT_SAS_TOPO_ES_RESPONDING (0x03) #define MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING (0x04) /* defines for the LinkRate field */ #define MPI2_EVENT_SAS_TOPO_LR_CURRENT_MASK (0xF0) #define MPI2_EVENT_SAS_TOPO_LR_CURRENT_SHIFT (4) #define MPI2_EVENT_SAS_TOPO_LR_PREV_MASK (0x0F) #define MPI2_EVENT_SAS_TOPO_LR_PREV_SHIFT (0) #define MPI2_EVENT_SAS_TOPO_LR_UNKNOWN_LINK_RATE (0x00) #define MPI2_EVENT_SAS_TOPO_LR_PHY_DISABLED (0x01) #define MPI2_EVENT_SAS_TOPO_LR_NEGOTIATION_FAILED (0x02) #define MPI2_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE (0x03) #define MPI2_EVENT_SAS_TOPO_LR_PORT_SELECTOR (0x04) #define MPI2_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS (0x05) #define MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY (0x06) #define MPI2_EVENT_SAS_TOPO_LR_RATE_1_5 (0x08) #define MPI2_EVENT_SAS_TOPO_LR_RATE_3_0 (0x09) #define MPI2_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0A) #define MPI25_EVENT_SAS_TOPO_LR_RATE_12_0 (0x0B) #define MPI26_EVENT_SAS_TOPO_LR_RATE_22_5 (0x0C) /* values for the PhyStatus field */ #define MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT (0x80) #define MPI2_EVENT_SAS_TOPO_PS_MULTIPLEX_CHANGE (0x10) /* values for the PhyStatus ReasonCode sub-field */ #define MPI2_EVENT_SAS_TOPO_RC_MASK (0x0F) #define MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED (0x01) #define MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING (0x02) #define MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED (0x03) #define MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE (0x04) #define MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING (0x05) /* SAS Enclosure Device Status Change Event data */ typedef struct _MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE { U16 EnclosureHandle; /* 0x00 */ U8 ReasonCode; /* 0x02 */ U8 PhysicalPort; /* 0x03 */ U64 EnclosureLogicalID; /* 0x04 */ U16 NumSlots; /* 0x0C */ U16 StartSlot; /* 0x0E */ U32 PhyBits; /* 0x10 */ } MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE, MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE, Mpi2EventDataSasEnclDevStatusChange_t, MPI2_POINTER pMpi2EventDataSasEnclDevStatusChange_t, MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE, MPI2_POINTER PTR_MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE, Mpi26EventDataEnclDevStatusChange_t, MPI2_POINTER pMpi26EventDataEnclDevStatusChange_t; /* SAS Enclosure Device Status Change event ReasonCode values */ #define MPI2_EVENT_SAS_ENCL_RC_ADDED (0x01) #define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING (0x02) /* Enclosure Device Status Change event ReasonCode values */ #define MPI26_EVENT_ENCL_RC_ADDED (0x01) #define MPI26_EVENT_ENCL_RC_NOT_RESPONDING (0x02) /* SAS PHY Counter Event data */ typedef struct _MPI2_EVENT_DATA_SAS_PHY_COUNTER { U64 TimeStamp; /* 0x00 */ U32 Reserved1; /* 0x08 */ U8 PhyEventCode; /* 0x0C */ U8 PhyNum; /* 0x0D */ U16 Reserved2; /* 0x0E */ U32 PhyEventInfo; /* 0x10 */ U8 CounterType; /* 0x14 */ U8 ThresholdWindow; /* 0x15 */ U8 TimeUnits; /* 0x16 */ U8 Reserved3; /* 0x17 */ U32 EventThreshold; /* 0x18 */ U16 ThresholdFlags; /* 0x1C */ U16 Reserved4; /* 0x1E */ } MPI2_EVENT_DATA_SAS_PHY_COUNTER, MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_PHY_COUNTER, Mpi2EventDataSasPhyCounter_t, MPI2_POINTER pMpi2EventDataSasPhyCounter_t; /* use MPI2_SASPHY3_EVENT_CODE_ values from mpi2_cnfg.h for the PhyEventCode field */ /* use MPI2_SASPHY3_COUNTER_TYPE_ values from mpi2_cnfg.h for the CounterType field */ /* use MPI2_SASPHY3_TIME_UNITS_ values from mpi2_cnfg.h for the TimeUnits field */ /* use MPI2_SASPHY3_TFLAGS_ values from mpi2_cnfg.h for the ThresholdFlags field */ /* SAS Quiesce Event data */ typedef struct _MPI2_EVENT_DATA_SAS_QUIESCE { U8 ReasonCode; /* 0x00 */ U8 Reserved1; /* 0x01 */ U16 Reserved2; /* 0x02 */ U32 Reserved3; /* 0x04 */ } MPI2_EVENT_DATA_SAS_QUIESCE, MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_QUIESCE, Mpi2EventDataSasQuiesce_t, MPI2_POINTER pMpi2EventDataSasQuiesce_t; /* SAS Quiesce Event data ReasonCode values */ #define MPI2_EVENT_SAS_QUIESCE_RC_STARTED (0x01) #define MPI2_EVENT_SAS_QUIESCE_RC_COMPLETED (0x02) typedef struct _MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR { U16 DevHandle; /* 0x00 */ U8 ReasonCode; /* 0x02 */ U8 PhysicalPort; /* 0x03 */ U32 Reserved1[2]; /* 0x04 */ U64 SASAddress; /* 0x0C */ U32 Reserved2[2]; /* 0x14 */ } MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR, MPI2_POINTER PTR_MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR, Mpi25EventDataSasDeviceDiscoveryError_t, MPI2_POINTER pMpi25EventDataSasDeviceDiscoveryError_t; /* SAS Device Discovery Error Event data ReasonCode values */ #define MPI25_EVENT_SAS_DISC_ERR_SMP_FAILED (0x01) #define MPI25_EVENT_SAS_DISC_ERR_SMP_TIMEOUT (0x02) /* Host Based Discovery Phy Event data */ typedef struct _MPI2_EVENT_HBD_PHY_SAS { U8 Flags; /* 0x00 */ U8 NegotiatedLinkRate; /* 0x01 */ U8 PhyNum; /* 0x02 */ U8 PhysicalPort; /* 0x03 */ U32 Reserved1; /* 0x04 */ U8 InitialFrame[28]; /* 0x08 */ } MPI2_EVENT_HBD_PHY_SAS, MPI2_POINTER PTR_MPI2_EVENT_HBD_PHY_SAS, Mpi2EventHbdPhySas_t, MPI2_POINTER pMpi2EventHbdPhySas_t; /* values for the Flags field */ #define MPI2_EVENT_HBD_SAS_FLAGS_FRAME_VALID (0x02) #define MPI2_EVENT_HBD_SAS_FLAGS_SATA_FRAME (0x01) /* use MPI2_SAS_NEG_LINK_RATE_ defines from mpi2_cnfg.h for the NegotiatedLinkRate field */ typedef union _MPI2_EVENT_HBD_DESCRIPTOR { MPI2_EVENT_HBD_PHY_SAS Sas; } MPI2_EVENT_HBD_DESCRIPTOR, MPI2_POINTER PTR_MPI2_EVENT_HBD_DESCRIPTOR, Mpi2EventHbdDescriptor_t, MPI2_POINTER pMpi2EventHbdDescriptor_t; typedef struct _MPI2_EVENT_DATA_HBD_PHY { U8 DescriptorType; /* 0x00 */ U8 Reserved1; /* 0x01 */ U16 Reserved2; /* 0x02 */ U32 Reserved3; /* 0x04 */ MPI2_EVENT_HBD_DESCRIPTOR Descriptor; /* 0x08 */ } MPI2_EVENT_DATA_HBD_PHY, MPI2_POINTER PTR_MPI2_EVENT_DATA_HBD_PHY, Mpi2EventDataHbdPhy_t, MPI2_POINTER pMpi2EventDataMpi2EventDataHbdPhy_t; /* values for the DescriptorType field */ #define MPI2_EVENT_HBD_DT_SAS (0x01) /* PCIe Device Status Change Event data (MPI v2.6 and later) */ typedef struct _MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE { U16 TaskTag; /* 0x00 */ U8 ReasonCode; /* 0x02 */ U8 PhysicalPort; /* 0x03 */ U8 ASC; /* 0x04 */ U8 ASCQ; /* 0x05 */ U16 DevHandle; /* 0x06 */ U32 Reserved2; /* 0x08 */ U64 WWID; /* 0x0C */ U8 LUN[8]; /* 0x14 */ } MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE, MPI2_POINTER PTR_MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE, Mpi26EventDataPCIeDeviceStatusChange_t, MPI2_POINTER pMpi26EventDataPCIeDeviceStatusChange_t; /* PCIe Device Status Change Event data ReasonCode values */ #define MPI26_EVENT_PCIDEV_STAT_RC_SMART_DATA (0x05) #define MPI26_EVENT_PCIDEV_STAT_RC_UNSUPPORTED (0x07) #define MPI26_EVENT_PCIDEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08) #define MPI26_EVENT_PCIDEV_STAT_RC_TASK_ABORT_INTERNAL (0x09) #define MPI26_EVENT_PCIDEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A) #define MPI26_EVENT_PCIDEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B) #define MPI26_EVENT_PCIDEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C) #define MPI26_EVENT_PCIDEV_STAT_RC_ASYNC_NOTIFICATION (0x0D) #define MPI26_EVENT_PCIDEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E) #define MPI26_EVENT_PCIDEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F) #define MPI26_EVENT_PCIDEV_STAT_RC_DEV_INIT_FAILURE (0x10) #define MPI26_EVENT_PCIDEV_STAT_RC_PCIE_HOT_RESET_FAILED (0x11) /* PCIe Enumeration Event data (MPI v2.6 and later) */ typedef struct _MPI26_EVENT_DATA_PCIE_ENUMERATION { U8 Flags; /* 0x00 */ U8 ReasonCode; /* 0x01 */ U8 PhysicalPort; /* 0x02 */ U8 Reserved1; /* 0x03 */ U32 EnumerationStatus; /* 0x04 */ } MPI26_EVENT_DATA_PCIE_ENUMERATION, MPI2_POINTER PTR_MPI26_EVENT_DATA_PCIE_ENUMERATION, Mpi26EventDataPCIeEnumeration_t, MPI2_POINTER pMpi26EventDataPCIeEnumeration_t; /* PCIe Enumeration Event data Flags values */ #define MPI26_EVENT_PCIE_ENUM_DEVICE_CHANGE (0x02) #define MPI26_EVENT_PCIE_ENUM_IN_PROGRESS (0x01) /* PCIe Enumeration Event data ReasonCode values */ #define MPI26_EVENT_PCIE_ENUM_RC_STARTED (0x01) #define MPI26_EVENT_PCIE_ENUM_RC_COMPLETED (0x02) /* PCIe Enumeration Event data EnumerationStatus values */ #define MPI26_EVENT_PCIE_ENUM_ES_MAX_SWITCHES_EXCEED (0x40000000) #define MPI26_EVENT_PCIE_ENUM_ES_MAX_DEVICES_EXCEED (0x20000000) #define MPI26_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED (0x10000000) /* PCIe Topology Change List Event data (MPI v2.6 and later) */ /* * Host code (drivers, BIOS, utilities, etc.) should leave this define set to * one and check NumEntries at runtime. */ #ifndef MPI26_EVENT_PCIE_TOPO_PORT_COUNT #define MPI26_EVENT_PCIE_TOPO_PORT_COUNT (1) #endif typedef struct _MPI26_EVENT_PCIE_TOPO_PORT_ENTRY { U16 AttachedDevHandle; /* 0x00 */ U8 PortStatus; /* 0x02 */ U8 Reserved1; /* 0x03 */ U8 CurrentPortInfo; /* 0x04 */ U8 Reserved2; /* 0x05 */ U8 PreviousPortInfo; /* 0x06 */ U8 Reserved3; /* 0x07 */ } MPI26_EVENT_PCIE_TOPO_PORT_ENTRY, MPI2_POINTER PTR_MPI26_EVENT_PCIE_TOPO_PORT_ENTRY, Mpi26EventPCIeTopoPortEntry_t, MPI2_POINTER pMpi26EventPCIeTopoPortEntry_t; /* PCIe Topology Change List Event data PortStatus values */ #define MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED (0x01) #define MPI26_EVENT_PCIE_TOPO_PS_NOT_RESPONDING (0x02) #define MPI26_EVENT_PCIE_TOPO_PS_PORT_CHANGED (0x03) #define MPI26_EVENT_PCIE_TOPO_PS_NO_CHANGE (0x04) #define MPI26_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING (0x05) /* PCIe Topology Change List Event data defines for CurrentPortInfo and PreviousPortInfo */ #define MPI26_EVENT_PCIE_TOPO_PI_LANE_MASK (0xF0) #define MPI26_EVENT_PCIE_TOPO_PI_LANES_UNKNOWN (0x00) #define MPI26_EVENT_PCIE_TOPO_PI_1_LANE (0x10) #define MPI26_EVENT_PCIE_TOPO_PI_2_LANES (0x20) #define MPI26_EVENT_PCIE_TOPO_PI_4_LANES (0x30) #define MPI26_EVENT_PCIE_TOPO_PI_8_LANES (0x40) #define MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK (0x0F) #define MPI26_EVENT_PCIE_TOPO_PI_RATE_UNKNOWN (0x00) #define MPI26_EVENT_PCIE_TOPO_PI_RATE_DISABLED (0x01) #define MPI26_EVENT_PCIE_TOPO_PI_RATE_2_5 (0x02) #define MPI26_EVENT_PCIE_TOPO_PI_RATE_5_0 (0x03) #define MPI26_EVENT_PCIE_TOPO_PI_RATE_8_0 (0x04) #define MPI26_EVENT_PCIE_TOPO_PI_RATE_16_0 (0x05) typedef struct _MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST { U16 EnclosureHandle; /* 0x00 */ U16 SwitchDevHandle; /* 0x02 */ U8 NumPorts; /* 0x04 */ U8 Reserved1; /* 0x05 */ U16 Reserved2; /* 0x06 */ U8 NumEntries; /* 0x08 */ U8 StartPortNum; /* 0x09 */ U8 SwitchStatus; /* 0x0A */ U8 PhysicalPort; /* 0x0B */ MPI26_EVENT_PCIE_TOPO_PORT_ENTRY PortEntry[MPI26_EVENT_PCIE_TOPO_PORT_COUNT]; /* 0x0C */ } MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST, MPI2_POINTER PTR_MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST, Mpi26EventDataPCIeTopologyChangeList_t, MPI2_POINTER pMpi26EventDataPCIeTopologyChangeList_t; /* PCIe Topology Change List Event data SwitchStatus values */ #define MPI26_EVENT_PCIE_TOPO_SS_NO_PCIE_SWITCH (0x00) #define MPI26_EVENT_PCIE_TOPO_SS_ADDED (0x01) #define MPI26_EVENT_PCIE_TOPO_SS_NOT_RESPONDING (0x02) #define MPI26_EVENT_PCIE_TOPO_SS_RESPONDING (0x03) #define MPI26_EVENT_PCIE_TOPO_SS_DELAY_NOT_RESPONDING (0x04) /* PCIe Link Counter Event data (MPI v2.6 and later) */ typedef struct _MPI26_EVENT_DATA_PCIE_LINK_COUNTER { U64 TimeStamp; /* 0x00 */ U32 Reserved1; /* 0x08 */ U8 LinkEventCode; /* 0x0C */ U8 LinkNum; /* 0x0D */ U16 Reserved2; /* 0x0E */ U32 LinkEventInfo; /* 0x10 */ U8 CounterType; /* 0x14 */ U8 ThresholdWindow; /* 0x15 */ U8 TimeUnits; /* 0x16 */ U8 Reserved3; /* 0x17 */ U32 EventThreshold; /* 0x18 */ U16 ThresholdFlags; /* 0x1C */ U16 Reserved4; /* 0x1E */ } MPI26_EVENT_DATA_PCIE_LINK_COUNTER, MPI2_POINTER PTR_MPI26_EVENT_DATA_PCIE_LINK_COUNTER, Mpi26EventDataPcieLinkCounter_t, MPI2_POINTER pMpi26EventDataPcieLinkCounter_t; /* use MPI26_PCIELINK3_EVTCODE_ values from mpi2_cnfg.h for the LinkEventCode field */ /* use MPI26_PCIELINK3_COUNTER_TYPE_ values from mpi2_cnfg.h for the CounterType field */ /* use MPI26_PCIELINK3_TIME_UNITS_ values from mpi2_cnfg.h for the TimeUnits field */ /* use MPI26_PCIELINK3_TFLAGS_ values from mpi2_cnfg.h for the ThresholdFlags field */ /**************************************************************************** * EventAck message ****************************************************************************/ /* EventAck Request message */ typedef struct _MPI2_EVENT_ACK_REQUEST { U16 Reserved1; /* 0x00 */ U8 ChainOffset; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved2; /* 0x04 */ U8 Reserved3; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved4; /* 0x0A */ U16 Event; /* 0x0C */ U16 Reserved5; /* 0x0E */ U32 EventContext; /* 0x10 */ } MPI2_EVENT_ACK_REQUEST, MPI2_POINTER PTR_MPI2_EVENT_ACK_REQUEST, Mpi2EventAckRequest_t, MPI2_POINTER pMpi2EventAckRequest_t; /* EventAck Reply message */ typedef struct _MPI2_EVENT_ACK_REPLY { U16 Reserved1; /* 0x00 */ U8 MsgLength; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved2; /* 0x04 */ U8 Reserved3; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved4; /* 0x0A */ U16 Reserved5; /* 0x0C */ U16 IOCStatus; /* 0x0E */ U32 IOCLogInfo; /* 0x10 */ } MPI2_EVENT_ACK_REPLY, MPI2_POINTER PTR_MPI2_EVENT_ACK_REPLY, Mpi2EventAckReply_t, MPI2_POINTER pMpi2EventAckReply_t; /**************************************************************************** * SendHostMessage message ****************************************************************************/ /* SendHostMessage Request message */ typedef struct _MPI2_SEND_HOST_MESSAGE_REQUEST { U16 HostDataLength; /* 0x00 */ U8 ChainOffset; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved1; /* 0x04 */ U8 Reserved2; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved3; /* 0x0A */ U8 Reserved4; /* 0x0C */ U8 DestVF_ID; /* 0x0D */ U16 Reserved5; /* 0x0E */ U32 Reserved6; /* 0x10 */ U32 Reserved7; /* 0x14 */ U32 Reserved8; /* 0x18 */ U32 Reserved9; /* 0x1C */ U32 Reserved10; /* 0x20 */ U32 HostData[1]; /* 0x24 */ } MPI2_SEND_HOST_MESSAGE_REQUEST, MPI2_POINTER PTR_MPI2_SEND_HOST_MESSAGE_REQUEST, Mpi2SendHostMessageRequest_t, MPI2_POINTER pMpi2SendHostMessageRequest_t; /* SendHostMessage Reply message */ typedef struct _MPI2_SEND_HOST_MESSAGE_REPLY { U16 HostDataLength; /* 0x00 */ U8 MsgLength; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved1; /* 0x04 */ U8 Reserved2; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved3; /* 0x0A */ U16 Reserved4; /* 0x0C */ U16 IOCStatus; /* 0x0E */ U32 IOCLogInfo; /* 0x10 */ } MPI2_SEND_HOST_MESSAGE_REPLY, MPI2_POINTER PTR_MPI2_SEND_HOST_MESSAGE_REPLY, Mpi2SendHostMessageReply_t, MPI2_POINTER pMpi2SendHostMessageReply_t; /**************************************************************************** * FWDownload message ****************************************************************************/ /* MPI v2.0 FWDownload Request message */ typedef struct _MPI2_FW_DOWNLOAD_REQUEST { U8 ImageType; /* 0x00 */ U8 Reserved1; /* 0x01 */ U8 ChainOffset; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved2; /* 0x04 */ U8 Reserved3; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved4; /* 0x0A */ U32 TotalImageSize; /* 0x0C */ U32 Reserved5; /* 0x10 */ MPI2_MPI_SGE_UNION SGL; /* 0x14 */ } MPI2_FW_DOWNLOAD_REQUEST, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_REQUEST, Mpi2FWDownloadRequest, MPI2_POINTER pMpi2FWDownloadRequest; #define MPI2_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT (0x01) #define MPI2_FW_DOWNLOAD_ITYPE_FW (0x01) #define MPI2_FW_DOWNLOAD_ITYPE_BIOS (0x02) #define MPI2_FW_DOWNLOAD_ITYPE_MANUFACTURING (0x06) #define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_1 (0x07) #define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_2 (0x08) #define MPI2_FW_DOWNLOAD_ITYPE_MEGARAID (0x09) #define MPI2_FW_DOWNLOAD_ITYPE_COMPLETE (0x0A) #define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) #define MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY (0x0C) /* MPI v2.5 and newer */ #define MPI2_FW_DOWNLOAD_ITYPE_CBB_BACKUP (0x0D) #define MPI2_FW_DOWNLOAD_ITYPE_SBR (0x0E) #define MPI2_FW_DOWNLOAD_ITYPE_SBR_BACKUP (0x0F) #define MPI2_FW_DOWNLOAD_ITYPE_HIIM (0x10) #define MPI2_FW_DOWNLOAD_ITYPE_HIIA (0x11) #define MPI2_FW_DOWNLOAD_ITYPE_CTLR (0x12) #define MPI2_FW_DOWNLOAD_ITYPE_IMR_FIRMWARE (0x13) #define MPI2_FW_DOWNLOAD_ITYPE_MR_NVDATA (0x14) #define MPI2_FW_DOWNLOAD_ITYPE_CPLD (0x15) /* MPI v2.6 and newer */ #define MPI2_FW_DOWNLOAD_ITYPE_PSOC (0x16) /* MPI v2.6 and newer */ #define MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC (0xF0) #define MPI2_FW_DOWNLOAD_ITYPE_TERMINATE (0xFF) /* MPI v2.6 and newer */ /* MPI v2.0 FWDownload TransactionContext Element */ typedef struct _MPI2_FW_DOWNLOAD_TCSGE { U8 Reserved1; /* 0x00 */ U8 ContextSize; /* 0x01 */ U8 DetailsLength; /* 0x02 */ U8 Flags; /* 0x03 */ U32 Reserved2; /* 0x04 */ U32 ImageOffset; /* 0x08 */ U32 ImageSize; /* 0x0C */ } MPI2_FW_DOWNLOAD_TCSGE, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_TCSGE, Mpi2FWDownloadTCSGE_t, MPI2_POINTER pMpi2FWDownloadTCSGE_t; /* MPI v2.5 FWDownload Request message */ typedef struct _MPI25_FW_DOWNLOAD_REQUEST { U8 ImageType; /* 0x00 */ U8 Reserved1; /* 0x01 */ U8 ChainOffset; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved2; /* 0x04 */ U8 Reserved3; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved4; /* 0x0A */ U32 TotalImageSize; /* 0x0C */ U32 Reserved5; /* 0x10 */ U32 Reserved6; /* 0x14 */ U32 ImageOffset; /* 0x18 */ U32 ImageSize; /* 0x1C */ MPI25_SGE_IO_UNION SGL; /* 0x20 */ } MPI25_FW_DOWNLOAD_REQUEST, MPI2_POINTER PTR_MPI25_FW_DOWNLOAD_REQUEST, Mpi25FWDownloadRequest, MPI2_POINTER pMpi25FWDownloadRequest; /* FWDownload Reply message */ typedef struct _MPI2_FW_DOWNLOAD_REPLY { U8 ImageType; /* 0x00 */ U8 Reserved1; /* 0x01 */ U8 MsgLength; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved2; /* 0x04 */ U8 Reserved3; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved4; /* 0x0A */ U16 Reserved5; /* 0x0C */ U16 IOCStatus; /* 0x0E */ U32 IOCLogInfo; /* 0x10 */ } MPI2_FW_DOWNLOAD_REPLY, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_REPLY, Mpi2FWDownloadReply_t, MPI2_POINTER pMpi2FWDownloadReply_t; /**************************************************************************** * FWUpload message ****************************************************************************/ /* MPI v2.0 FWUpload Request message */ typedef struct _MPI2_FW_UPLOAD_REQUEST { U8 ImageType; /* 0x00 */ U8 Reserved1; /* 0x01 */ U8 ChainOffset; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved2; /* 0x04 */ U8 Reserved3; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved4; /* 0x0A */ U32 Reserved5; /* 0x0C */ U32 Reserved6; /* 0x10 */ MPI2_MPI_SGE_UNION SGL; /* 0x14 */ } MPI2_FW_UPLOAD_REQUEST, MPI2_POINTER PTR_MPI2_FW_UPLOAD_REQUEST, Mpi2FWUploadRequest_t, MPI2_POINTER pMpi2FWUploadRequest_t; #define MPI2_FW_UPLOAD_ITYPE_FW_CURRENT (0x00) #define MPI2_FW_UPLOAD_ITYPE_FW_FLASH (0x01) #define MPI2_FW_UPLOAD_ITYPE_BIOS_FLASH (0x02) #define MPI2_FW_UPLOAD_ITYPE_FW_BACKUP (0x05) #define MPI2_FW_UPLOAD_ITYPE_MANUFACTURING (0x06) #define MPI2_FW_UPLOAD_ITYPE_CONFIG_1 (0x07) #define MPI2_FW_UPLOAD_ITYPE_CONFIG_2 (0x08) #define MPI2_FW_UPLOAD_ITYPE_MEGARAID (0x09) #define MPI2_FW_UPLOAD_ITYPE_COMPLETE (0x0A) #define MPI2_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) #define MPI2_FW_UPLOAD_ITYPE_CBB_BACKUP (0x0D) #define MPI2_FW_UPLOAD_ITYPE_SBR (0x0E) #define MPI2_FW_UPLOAD_ITYPE_SBR_BACKUP (0x0F) #define MPI2_FW_UPLOAD_ITYPE_HIIM (0x10) #define MPI2_FW_UPLOAD_ITYPE_HIIA (0x11) #define MPI2_FW_UPLOAD_ITYPE_CTLR (0x12) #define MPI2_FW_UPLOAD_ITYPE_IMR_FIRMWARE (0x13) #define MPI2_FW_UPLOAD_ITYPE_MR_NVDATA (0x14) /* MPI v2.0 FWUpload TransactionContext Element */ typedef struct _MPI2_FW_UPLOAD_TCSGE { U8 Reserved1; /* 0x00 */ U8 ContextSize; /* 0x01 */ U8 DetailsLength; /* 0x02 */ U8 Flags; /* 0x03 */ U32 Reserved2; /* 0x04 */ U32 ImageOffset; /* 0x08 */ U32 ImageSize; /* 0x0C */ } MPI2_FW_UPLOAD_TCSGE, MPI2_POINTER PTR_MPI2_FW_UPLOAD_TCSGE, Mpi2FWUploadTCSGE_t, MPI2_POINTER pMpi2FWUploadTCSGE_t; /* MPI v2.5 FWUpload Request message */ typedef struct _MPI25_FW_UPLOAD_REQUEST { U8 ImageType; /* 0x00 */ U8 Reserved1; /* 0x01 */ U8 ChainOffset; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved2; /* 0x04 */ U8 Reserved3; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved4; /* 0x0A */ U32 Reserved5; /* 0x0C */ U32 Reserved6; /* 0x10 */ U32 Reserved7; /* 0x14 */ U32 ImageOffset; /* 0x18 */ U32 ImageSize; /* 0x1C */ MPI25_SGE_IO_UNION SGL; /* 0x20 */ } MPI25_FW_UPLOAD_REQUEST, MPI2_POINTER PTR_MPI25_FW_UPLOAD_REQUEST, Mpi25FWUploadRequest_t, MPI2_POINTER pMpi25FWUploadRequest_t; /* FWUpload Reply message */ typedef struct _MPI2_FW_UPLOAD_REPLY { U8 ImageType; /* 0x00 */ U8 Reserved1; /* 0x01 */ U8 MsgLength; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved2; /* 0x04 */ U8 Reserved3; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved4; /* 0x0A */ U16 Reserved5; /* 0x0C */ U16 IOCStatus; /* 0x0E */ U32 IOCLogInfo; /* 0x10 */ U32 ActualImageSize; /* 0x14 */ } MPI2_FW_UPLOAD_REPLY, MPI2_POINTER PTR_MPI2_FW_UPLOAD_REPLY, Mpi2FWUploadReply_t, MPI2_POINTER pMPi2FWUploadReply_t; /**************************************************************************** * PowerManagementControl message ****************************************************************************/ /* PowerManagementControl Request message */ typedef struct _MPI2_PWR_MGMT_CONTROL_REQUEST { U8 Feature; /* 0x00 */ U8 Reserved1; /* 0x01 */ U8 ChainOffset; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved2; /* 0x04 */ U8 Reserved3; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved4; /* 0x0A */ U8 Parameter1; /* 0x0C */ U8 Parameter2; /* 0x0D */ U8 Parameter3; /* 0x0E */ U8 Parameter4; /* 0x0F */ U32 Reserved5; /* 0x10 */ U32 Reserved6; /* 0x14 */ } MPI2_PWR_MGMT_CONTROL_REQUEST, MPI2_POINTER PTR_MPI2_PWR_MGMT_CONTROL_REQUEST, Mpi2PwrMgmtControlRequest_t, MPI2_POINTER pMpi2PwrMgmtControlRequest_t; /* defines for the Feature field */ #define MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND (0x01) #define MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION (0x02) #define MPI2_PM_CONTROL_FEATURE_PCIE_LINK (0x03) /* obsolete */ #define MPI2_PM_CONTROL_FEATURE_IOC_SPEED (0x04) #define MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE (0x05) /* reserved in MPI 2.0 */ #define MPI2_PM_CONTROL_FEATURE_MIN_PRODUCT_SPECIFIC (0x80) #define MPI2_PM_CONTROL_FEATURE_MAX_PRODUCT_SPECIFIC (0xFF) /* parameter usage for the MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND Feature */ /* Parameter1 contains a PHY number */ /* Parameter2 indicates power condition action using these defines */ #define MPI2_PM_CONTROL_PARAM2_PARTIAL (0x01) #define MPI2_PM_CONTROL_PARAM2_SLUMBER (0x02) #define MPI2_PM_CONTROL_PARAM2_EXIT_PWR_MGMT (0x03) /* Parameter3 and Parameter4 are reserved */ /* parameter usage for the MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION Feature */ /* Parameter1 contains SAS port width modulation group number */ /* Parameter2 indicates IOC action using these defines */ #define MPI2_PM_CONTROL_PARAM2_REQUEST_OWNERSHIP (0x01) #define MPI2_PM_CONTROL_PARAM2_CHANGE_MODULATION (0x02) #define MPI2_PM_CONTROL_PARAM2_RELINQUISH_OWNERSHIP (0x03) /* Parameter3 indicates desired modulation level using these defines */ #define MPI2_PM_CONTROL_PARAM3_25_PERCENT (0x00) #define MPI2_PM_CONTROL_PARAM3_50_PERCENT (0x01) #define MPI2_PM_CONTROL_PARAM3_75_PERCENT (0x02) #define MPI2_PM_CONTROL_PARAM3_100_PERCENT (0x03) /* Parameter4 is reserved */ /* this next set (_PCIE_LINK) is obsolete */ /* parameter usage for the MPI2_PM_CONTROL_FEATURE_PCIE_LINK Feature */ /* Parameter1 indicates desired PCIe link speed using these defines */ #define MPI2_PM_CONTROL_PARAM1_PCIE_2_5_GBPS (0x00) /* obsolete */ #define MPI2_PM_CONTROL_PARAM1_PCIE_5_0_GBPS (0x01) /* obsolete */ #define MPI2_PM_CONTROL_PARAM1_PCIE_8_0_GBPS (0x02) /* obsolete */ /* Parameter2 indicates desired PCIe link width using these defines */ #define MPI2_PM_CONTROL_PARAM2_WIDTH_X1 (0x01) /* obsolete */ #define MPI2_PM_CONTROL_PARAM2_WIDTH_X2 (0x02) /* obsolete */ #define MPI2_PM_CONTROL_PARAM2_WIDTH_X4 (0x04) /* obsolete */ #define MPI2_PM_CONTROL_PARAM2_WIDTH_X8 (0x08) /* obsolete */ /* Parameter3 and Parameter4 are reserved */ /* parameter usage for the MPI2_PM_CONTROL_FEATURE_IOC_SPEED Feature */ /* Parameter1 indicates desired IOC hardware clock speed using these defines */ #define MPI2_PM_CONTROL_PARAM1_FULL_IOC_SPEED (0x01) #define MPI2_PM_CONTROL_PARAM1_HALF_IOC_SPEED (0x02) #define MPI2_PM_CONTROL_PARAM1_QUARTER_IOC_SPEED (0x04) #define MPI2_PM_CONTROL_PARAM1_EIGHTH_IOC_SPEED (0x08) /* Parameter2, Parameter3, and Parameter4 are reserved */ /* parameter usage for the MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE Feature */ /* Parameter1 indicates host action regarding global power management mode */ #define MPI2_PM_CONTROL_PARAM1_TAKE_CONTROL (0x01) #define MPI2_PM_CONTROL_PARAM1_CHANGE_GLOBAL_MODE (0x02) #define MPI2_PM_CONTROL_PARAM1_RELEASE_CONTROL (0x03) /* Parameter2 indicates the requested global power management mode */ #define MPI2_PM_CONTROL_PARAM2_FULL_PWR_PERF (0x01) #define MPI2_PM_CONTROL_PARAM2_REDUCED_PWR_PERF (0x08) #define MPI2_PM_CONTROL_PARAM2_STANDBY (0x40) /* Parameter3 and Parameter4 are reserved */ /* PowerManagementControl Reply message */ typedef struct _MPI2_PWR_MGMT_CONTROL_REPLY { U8 Feature; /* 0x00 */ U8 Reserved1; /* 0x01 */ U8 MsgLength; /* 0x02 */ U8 Function; /* 0x03 */ U16 Reserved2; /* 0x04 */ U8 Reserved3; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved4; /* 0x0A */ U16 Reserved5; /* 0x0C */ U16 IOCStatus; /* 0x0E */ U32 IOCLogInfo; /* 0x10 */ } MPI2_PWR_MGMT_CONTROL_REPLY, MPI2_POINTER PTR_MPI2_PWR_MGMT_CONTROL_REPLY, Mpi2PwrMgmtControlReply_t, MPI2_POINTER pMpi2PwrMgmtControlReply_t; /**************************************************************************** * IO Unit Control messages (MPI v2.6 and later only.) ****************************************************************************/ /* IO Unit Control Request Message */ typedef struct _MPI26_IOUNIT_CONTROL_REQUEST { U8 Operation; /* 0x00 */ U8 Reserved1; /* 0x01 */ U8 ChainOffset; /* 0x02 */ U8 Function; /* 0x03 */ U16 DevHandle; /* 0x04 */ U8 IOCParameter; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved3; /* 0x0A */ U16 Reserved4; /* 0x0C */ U8 PhyNum; /* 0x0E */ U8 PrimFlags; /* 0x0F */ U32 Primitive; /* 0x10 */ U8 LookupMethod; /* 0x14 */ U8 Reserved5; /* 0x15 */ U16 SlotNumber; /* 0x16 */ U64 LookupAddress; /* 0x18 */ U32 IOCParameterValue; /* 0x20 */ U32 Reserved7; /* 0x24 */ U32 Reserved8; /* 0x28 */ } MPI26_IOUNIT_CONTROL_REQUEST, MPI2_POINTER PTR_MPI26_IOUNIT_CONTROL_REQUEST, Mpi26IoUnitControlRequest_t, MPI2_POINTER pMpi26IoUnitControlRequest_t; /* values for the Operation field */ #define MPI26_CTRL_OP_CLEAR_ALL_PERSISTENT (0x02) #define MPI26_CTRL_OP_SAS_PHY_LINK_RESET (0x06) #define MPI26_CTRL_OP_SAS_PHY_HARD_RESET (0x07) #define MPI26_CTRL_OP_PHY_CLEAR_ERROR_LOG (0x08) #define MPI26_CTRL_OP_LINK_CLEAR_ERROR_LOG (0x09) #define MPI26_CTRL_OP_SAS_SEND_PRIMITIVE (0x0A) #define MPI26_CTRL_OP_FORCE_FULL_DISCOVERY (0x0B) #define MPI26_CTRL_OP_REMOVE_DEVICE (0x0D) #define MPI26_CTRL_OP_LOOKUP_MAPPING (0x0E) #define MPI26_CTRL_OP_SET_IOC_PARAMETER (0x0F) #define MPI26_CTRL_OP_ENABLE_FP_DEVICE (0x10) #define MPI26_CTRL_OP_DISABLE_FP_DEVICE (0x11) #define MPI26_CTRL_OP_ENABLE_FP_ALL (0x12) #define MPI26_CTRL_OP_DISABLE_FP_ALL (0x13) #define MPI26_CTRL_OP_DEV_ENABLE_NCQ (0x14) #define MPI26_CTRL_OP_DEV_DISABLE_NCQ (0x15) #define MPI26_CTRL_OP_SHUTDOWN (0x16) #define MPI26_CTRL_OP_DEV_ENABLE_PERSIST_CONNECTION (0x17) #define MPI26_CTRL_OP_DEV_DISABLE_PERSIST_CONNECTION (0x18) #define MPI26_CTRL_OP_DEV_CLOSE_PERSIST_CONNECTION (0x19) #define MPI26_CTRL_OP_ENABLE_NVME_SGL_FORMAT (0x1A) #define MPI26_CTRL_OP_DISABLE_NVME_SGL_FORMAT (0x1B) #define MPI26_CTRL_OP_PRODUCT_SPECIFIC_MIN (0x80) /* values for the PrimFlags field */ #define MPI26_CTRL_PRIMFLAGS_SINGLE (0x08) #define MPI26_CTRL_PRIMFLAGS_TRIPLE (0x02) #define MPI26_CTRL_PRIMFLAGS_REDUNDANT (0x01) /* values for the LookupMethod field */ #define MPI26_CTRL_LOOKUP_METHOD_WWID_ADDRESS (0x01) #define MPI26_CTRL_LOOKUP_METHOD_ENCLOSURE_SLOT (0x02) #define MPI26_CTRL_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03) /* IO Unit Control Reply Message */ typedef struct _MPI26_IOUNIT_CONTROL_REPLY { U8 Operation; /* 0x00 */ U8 Reserved1; /* 0x01 */ U8 MsgLength; /* 0x02 */ U8 Function; /* 0x03 */ U16 DevHandle; /* 0x04 */ U8 IOCParameter; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved3; /* 0x0A */ U16 Reserved4; /* 0x0C */ U16 IOCStatus; /* 0x0E */ U32 IOCLogInfo; /* 0x10 */ } MPI26_IOUNIT_CONTROL_REPLY, MPI2_POINTER PTR_MPI26_IOUNIT_CONTROL_REPLY, Mpi26IoUnitControlReply_t, MPI2_POINTER pMpi26IoUnitControlReply_t; #endif