/* * SPDX-License-Identifier: BSD-2-Clause * * Copyright (c) 2016-2023, Broadcom Inc. All rights reserved. * Support: * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are * met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation and/or other * materials provided with the distribution. * 3. Neither the name of the Broadcom Inc. nor the names of its contributors * may be used to endorse or promote products derived from this software without * specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * * The views and conclusions contained in the software and documentation are * those of the authors and should not be interpreted as representing * official policies,either expressed or implied, of the FreeBSD Project. * * Mail to: Broadcom Inc 1320 Ridder Park Dr, San Jose, CA 95131 * * Broadcom Inc. (Broadcom) MPI3MR Adapter FreeBSD * */ #ifndef MPI30_IOC_H #define MPI30_IOC_H 1 /***************************************************************************** * IOC Messages * ****************************************************************************/ /***************************************************************************** * IOCInit Request Message * ****************************************************************************/ typedef struct _MPI3_IOC_INIT_REQUEST { U16 HostTag; /* 0x00 */ U8 IOCUseOnly02; /* 0x02 */ U8 Function; /* 0x03 */ U16 IOCUseOnly04; /* 0x04 */ U8 IOCUseOnly06; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U16 ChangeCount; /* 0x08 */ U16 Reserved0A; /* 0x0A */ MPI3_VERSION_UNION MPIVersion; /* 0x0C */ U64 TimeStamp; /* 0x10 */ U8 Reserved18; /* 0x18 */ U8 WhoInit; /* 0x19 */ U16 Reserved1A; /* 0x1A */ U16 ReplyFreeQueueDepth; /* 0x1C */ U16 Reserved1E; /* 0x1E */ U64 ReplyFreeQueueAddress; /* 0x20 */ U32 Reserved28; /* 0x28 */ U16 SenseBufferFreeQueueDepth; /* 0x2C */ U16 SenseBufferLength; /* 0x2E */ U64 SenseBufferFreeQueueAddress; /* 0x30 */ U64 DriverInformationAddress; /* 0x38 */ } MPI3_IOC_INIT_REQUEST, MPI3_POINTER PTR_MPI3_IOC_INIT_REQUEST, Mpi3IOCInitRequest_t, MPI3_POINTER pMpi3IOCInitRequest_t; /**** Defines for the MsgFlags field ****/ #define MPI3_IOCINIT_MSGFLAGS_HOSTMETADATA_MASK (0x03) #define MPI3_IOCINIT_MSGFLAGS_HOSTMETADATA_NOT_USED (0x00) #define MPI3_IOCINIT_MSGFLAGS_HOSTMETADATA_SEPARATED (0x01) #define MPI3_IOCINIT_MSGFLAGS_HOSTMETADATA_INLINE (0x02) #define MPI3_IOCINIT_MSGFLAGS_HOSTMETADATA_BOTH (0x03) /**** Defines for the WhoInit field ****/ #define MPI3_WHOINIT_NOT_INITIALIZED (0x00) #define MPI3_WHOINIT_ROM_BIOS (0x02) #define MPI3_WHOINIT_HOST_DRIVER (0x03) #define MPI3_WHOINIT_MANUFACTURER (0x04) /**** Defines for the DriverInformationAddress field */ typedef struct _MPI3_DRIVER_INFO_LAYOUT { U32 InformationLength; /* 0x00 */ U8 DriverSignature[12]; /* 0x04 */ U8 OsName[16]; /* 0x10 */ U8 OsVersion[12]; /* 0x20 */ U8 DriverName[20]; /* 0x2C */ U8 DriverVersion[32]; /* 0x40 */ U8 DriverReleaseDate[20]; /* 0x60 */ U32 DriverCapabilities; /* 0x74 */ } MPI3_DRIVER_INFO_LAYOUT, MPI3_POINTER PTR_MPI3_DRIVER_INFO_LAYOUT, Mpi3DriverInfoLayout_t, MPI3_POINTER pMpi3DriverInfoLayout_t; /***************************************************************************** * IOCFacts Request Message * ****************************************************************************/ typedef struct _MPI3_IOC_FACTS_REQUEST { U16 HostTag; /* 0x00 */ U8 IOCUseOnly02; /* 0x02 */ U8 Function; /* 0x03 */ U16 IOCUseOnly04; /* 0x04 */ U8 IOCUseOnly06; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U16 ChangeCount; /* 0x08 */ U16 Reserved0A; /* 0x0A */ U32 Reserved0C; /* 0x0C */ MPI3_SGE_UNION SGL; /* 0x10 */ } MPI3_IOC_FACTS_REQUEST, MPI3_POINTER PTR_MPI3_IOC_FACTS_REQUEST, Mpi3IOCFactsRequest_t, MPI3_POINTER pMpi3IOCFactsRequest_t; /***************************************************************************** * IOCFacts Data * ****************************************************************************/ typedef struct _MPI3_IOC_FACTS_DATA { U16 IOCFactsDataLength; /* 0x00 */ U16 Reserved02; /* 0x02 */ MPI3_VERSION_UNION MPIVersion; /* 0x04 */ MPI3_COMP_IMAGE_VERSION FWVersion; /* 0x08 */ U32 IOCCapabilities; /* 0x10 */ U8 IOCNumber; /* 0x14 */ U8 WhoInit; /* 0x15 */ U16 MaxMSIxVectors; /* 0x16 */ U16 MaxOutstandingRequests; /* 0x18 */ U16 ProductID; /* 0x1A */ U16 IOCRequestFrameSize; /* 0x1C */ U16 ReplyFrameSize; /* 0x1E */ U16 IOCExceptions; /* 0x20 */ U16 MaxPersistentID; /* 0x22 */ U8 SGEModifierMask; /* 0x24 */ U8 SGEModifierValue; /* 0x25 */ U8 SGEModifierShift; /* 0x26 */ U8 ProtocolFlags; /* 0x27 */ U16 MaxSASInitiators; /* 0x28 */ U16 MaxDataLength; /* 0x2A */ U16 MaxSASExpanders; /* 0x2C */ U16 MaxEnclosures; /* 0x2E */ U16 MinDevHandle; /* 0x30 */ U16 MaxDevHandle; /* 0x32 */ U16 MaxPCIeSwitches; /* 0x34 */ U16 MaxNVMe; /* 0x36 */ U16 Reserved38; /* 0x38 */ U16 MaxVDs; /* 0x3A */ U16 MaxHostPDs; /* 0x3C */ U16 MaxAdvHostPDs; /* 0x3E */ U16 MaxRAIDPDs; /* 0x40 */ U16 MaxPostedCmdBuffers; /* 0x42 */ U32 Flags; /* 0x44 */ U16 MaxOperationalRequestQueues; /* 0x48 */ U16 MaxOperationalReplyQueues; /* 0x4A */ U16 ShutdownTimeout; /* 0x4C */ U16 Reserved4E; /* 0x4E */ U32 DiagTraceSize; /* 0x50 */ U32 DiagFwSize; /* 0x54 */ U32 DiagDriverSize; /* 0x58 */ U8 MaxHostPDNsCount; /* 0x5C */ U8 MaxAdvHostPDNsCount; /* 0x5D */ U8 MaxRAIDPDNsCount; /* 0x5E */ U8 MaxDevicesPerThrottleGroup; /* 0x5F */ U16 IOThrottleDataLength; /* 0x60 */ U16 MaxIOThrottleGroup; /* 0x62 */ U16 IOThrottleLow; /* 0x64 */ U16 IOThrottleHigh; /* 0x66 */ } MPI3_IOC_FACTS_DATA, MPI3_POINTER PTR_MPI3_IOC_FACTS_DATA, Mpi3IOCFactsData_t, MPI3_POINTER pMpi3IOCFactsData_t; /**** Defines for the IOCCapabilities field ****/ #define MPI3_IOCFACTS_CAPABILITY_NON_SUPERVISOR_MASK (0x80000000) #define MPI3_IOCFACTS_CAPABILITY_SUPERVISOR_IOC (0x00000000) #define MPI3_IOCFACTS_CAPABILITY_NON_SUPERVISOR_IOC (0x80000000) #define MPI3_IOCFACTS_CAPABILITY_INT_COALESCE_MASK (0x00000600) #define MPI3_IOCFACTS_CAPABILITY_INT_COALESCE_FIXED_THRESHOLD (0x00000000) #define MPI3_IOCFACTS_CAPABILITY_INT_COALESCE_OUTSTANDING_IO (0x00000200) #define MPI3_IOCFACTS_CAPABILITY_COMPLETE_RESET_CAPABLE (0x00000100) #define MPI3_IOCFACTS_CAPABILITY_SEG_DIAG_TRACE_ENABLED (0x00000080) #define MPI3_IOCFACTS_CAPABILITY_SEG_DIAG_FW_ENABLED (0x00000040) #define MPI3_IOCFACTS_CAPABILITY_SEG_DIAG_DRIVER_ENABLED (0x00000020) #define MPI3_IOCFACTS_CAPABILITY_ADVANCED_HOST_PD_ENABLED (0x00000010) #define MPI3_IOCFACTS_CAPABILITY_RAID_CAPABLE (0x00000008) #define MPI3_IOCFACTS_CAPABILITY_MULTIPATH_ENABLED (0x00000002) #define MPI3_IOCFACTS_CAPABILITY_COALESCE_CTRL_SUPPORTED (0x00000001) /**** WhoInit values are defined under IOCInit Request Message definition ****/ /**** Defines for the ProductID field ****/ #define MPI3_IOCFACTS_PID_TYPE_MASK (0xF000) #define MPI3_IOCFACTS_PID_TYPE_SHIFT (12) #define MPI3_IOCFACTS_PID_PRODUCT_MASK (0x0F00) #define MPI3_IOCFACTS_PID_PRODUCT_SHIFT (8) #define MPI3_IOCFACTS_PID_FAMILY_MASK (0x00FF) #define MPI3_IOCFACTS_PID_FAMILY_SHIFT (0) /**** Defines for the IOCExceptions field ****/ #define MPI3_IOCFACTS_EXCEPT_SECURITY_REKEY (0x2000) #define MPI3_IOCFACTS_EXCEPT_SAS_DISABLED (0x1000) #define MPI3_IOCFACTS_EXCEPT_SAFE_MODE (0x0800) #define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_MASK (0x0700) #define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_NONE (0x0000) #define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_LOCAL_VIA_MGMT (0x0100) #define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_EXT_VIA_MGMT (0x0200) #define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_DRIVE_EXT_VIA_MGMT (0x0300) #define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_LOCAL_VIA_OOB (0x0400) #define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_EXT_VIA_OOB (0x0500) #define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_DRIVE_EXT_VIA_OOB (0x0600) #define MPI3_IOCFACTS_EXCEPT_PCIE_DISABLED (0x0080) #define MPI3_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE (0x0040) #define MPI3_IOCFACTS_EXCEPT_MANUFACT_CHECKSUM_FAIL (0x0020) #define MPI3_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0010) #define MPI3_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0008) #define MPI3_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x0001) #define MPI3_IOCFACTS_EXCEPT_BOOTSTAT_PRIMARY (0x0000) #define MPI3_IOCFACTS_EXCEPT_BOOTSTAT_SECONDARY (0x0001) /**** Defines for the ProtocolFlags field ****/ #define MPI3_IOCFACTS_PROTOCOL_SAS (0x0010) #define MPI3_IOCFACTS_PROTOCOL_SATA (0x0008) #define MPI3_IOCFACTS_PROTOCOL_NVME (0x0004) #define MPI3_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002) #define MPI3_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001) /**** Defines for the MaxDataLength field ****/ #define MPI3_IOCFACTS_MAX_DATA_LENGTH_NOT_REPORTED (0x0000) /**** Defines for the Flags field ****/ #define MPI3_IOCFACTS_FLAGS_SIGNED_NVDATA_REQUIRED (0x00010000) #define MPI3_IOCFACTS_FLAGS_DMA_ADDRESS_WIDTH_MASK (0x0000FF00) #define MPI3_IOCFACTS_FLAGS_DMA_ADDRESS_WIDTH_SHIFT (8) #define MPI3_IOCFACTS_FLAGS_INITIAL_PORT_ENABLE_MASK (0x00000030) #define MPI3_IOCFACTS_FLAGS_INITIAL_PORT_ENABLE_NOT_STARTED (0x00000000) #define MPI3_IOCFACTS_FLAGS_INITIAL_PORT_ENABLE_IN_PROGRESS (0x00000010) #define MPI3_IOCFACTS_FLAGS_INITIAL_PORT_ENABLE_COMPLETE (0x00000020) #define MPI3_IOCFACTS_FLAGS_PERSONALITY_MASK (0x0000000F) #define MPI3_IOCFACTS_FLAGS_PERSONALITY_EHBA (0x00000000) #define MPI3_IOCFACTS_FLAGS_PERSONALITY_RAID_DDR (0x00000002) /**** Defines for the IOThrottleDataLength field ****/ #define MPI3_IOCFACTS_IO_THROTTLE_DATA_LENGTH_NOT_REQUIRED (0x0000) /**** Defines for the IOThrottleDataLength field ****/ #define MPI3_IOCFACTS_MAX_IO_THROTTLE_GROUP_NOT_REQUIRED (0x0000) /***************************************************************************** * Management Passthrough Request Message * ****************************************************************************/ typedef struct _MPI3_MGMT_PASSTHROUGH_REQUEST { U16 HostTag; /* 0x00 */ U8 IOCUseOnly02; /* 0x02 */ U8 Function; /* 0x03 */ U16 IOCUseOnly04; /* 0x04 */ U8 IOCUseOnly06; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U16 ChangeCount; /* 0x08 */ U16 Reserved0A; /* 0x0A */ U32 Reserved0C[5]; /* 0x0C */ MPI3_SGE_UNION CommandSGL; /* 0x20 */ MPI3_SGE_UNION ResponseSGL; /* 0x30 */ } MPI3_MGMT_PASSTHROUGH_REQUEST, MPI3_POINTER PTR_MPI3_MGMT_PASSTHROUGH_REQUEST, Mpi3MgmtPassthroughRequest_t, MPI3_POINTER pMpi3MgmtPassthroughRequest_t; /***************************************************************************** * CreateRequestQueue Request Message * ****************************************************************************/ typedef struct _MPI3_CREATE_REQUEST_QUEUE_REQUEST { U16 HostTag; /* 0x00 */ U8 IOCUseOnly02; /* 0x02 */ U8 Function; /* 0x03 */ U16 IOCUseOnly04; /* 0x04 */ U8 IOCUseOnly06; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U16 ChangeCount; /* 0x08 */ U8 Flags; /* 0x0A */ U8 Burst; /* 0x0B */ U16 Size; /* 0x0C */ U16 QueueID; /* 0x0E */ U16 ReplyQueueID; /* 0x10 */ U16 Reserved12; /* 0x12 */ U32 Reserved14; /* 0x14 */ U64 BaseAddress; /* 0x18 */ } MPI3_CREATE_REQUEST_QUEUE_REQUEST, MPI3_POINTER PTR_MPI3_CREATE_REQUEST_QUEUE_REQUEST, Mpi3CreateRequestQueueRequest_t, MPI3_POINTER pMpi3CreateRequestQueueRequest_t; /**** Defines for the Flags field ****/ #define MPI3_CREATE_REQUEST_QUEUE_FLAGS_SEGMENTED_MASK (0x80) #define MPI3_CREATE_REQUEST_QUEUE_FLAGS_SEGMENTED_SEGMENTED (0x80) #define MPI3_CREATE_REQUEST_QUEUE_FLAGS_SEGMENTED_CONTIGUOUS (0x00) /**** Defines for the Size field ****/ #define MPI3_CREATE_REQUEST_QUEUE_SIZE_MINIMUM (2) /***************************************************************************** * DeleteRequestQueue Request Message * ****************************************************************************/ typedef struct _MPI3_DELETE_REQUEST_QUEUE_REQUEST { U16 HostTag; /* 0x00 */ U8 IOCUseOnly02; /* 0x02 */ U8 Function; /* 0x03 */ U16 IOCUseOnly04; /* 0x04 */ U8 IOCUseOnly06; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U16 ChangeCount; /* 0x08 */ U16 QueueID; /* 0x0A */ } MPI3_DELETE_REQUEST_QUEUE_REQUEST, MPI3_POINTER PTR_MPI3_DELETE_REQUEST_QUEUE_REQUEST, Mpi3DeleteRequestQueueRequest_t, MPI3_POINTER pMpi3DeleteRequestQueueRequest_t; /***************************************************************************** * CreateReplyQueue Request Message * ****************************************************************************/ typedef struct _MPI3_CREATE_REPLY_QUEUE_REQUEST { U16 HostTag; /* 0x00 */ U8 IOCUseOnly02; /* 0x02 */ U8 Function; /* 0x03 */ U16 IOCUseOnly04; /* 0x04 */ U8 IOCUseOnly06; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U16 ChangeCount; /* 0x08 */ U8 Flags; /* 0x0A */ U8 Reserved0B; /* 0x0B */ U16 Size; /* 0x0C */ U16 QueueID; /* 0x0E */ U16 MSIxIndex; /* 0x10 */ U16 Reserved12; /* 0x12 */ U32 Reserved14; /* 0x14 */ U64 BaseAddress; /* 0x18 */ } MPI3_CREATE_REPLY_QUEUE_REQUEST, MPI3_POINTER PTR_MPI3_CREATE_REPLY_QUEUE_REQUEST, Mpi3CreateReplyQueueRequest_t, MPI3_POINTER pMpi3CreateReplyQueueRequest_t; /**** Defines for the Flags field ****/ #define MPI3_CREATE_REPLY_QUEUE_FLAGS_SEGMENTED_MASK (0x80) #define MPI3_CREATE_REPLY_QUEUE_FLAGS_SEGMENTED_SEGMENTED (0x80) #define MPI3_CREATE_REPLY_QUEUE_FLAGS_SEGMENTED_CONTIGUOUS (0x00) #define MPI3_CREATE_REPLY_QUEUE_FLAGS_COALESCE_DISABLE (0x02) #define MPI3_CREATE_REPLY_QUEUE_FLAGS_INT_ENABLE_MASK (0x01) #define MPI3_CREATE_REPLY_QUEUE_FLAGS_INT_ENABLE_DISABLE (0x00) #define MPI3_CREATE_REPLY_QUEUE_FLAGS_INT_ENABLE_ENABLE (0x01) /**** Defines for the Size field ****/ #define MPI3_CREATE_REPLY_QUEUE_SIZE_MINIMUM (2) /***************************************************************************** * DeleteReplyQueue Request Message * ****************************************************************************/ typedef struct _MPI3_DELETE_REPLY_QUEUE_REQUEST { U16 HostTag; /* 0x00 */ U8 IOCUseOnly02; /* 0x02 */ U8 Function; /* 0x03 */ U16 IOCUseOnly04; /* 0x04 */ U8 IOCUseOnly06; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U16 ChangeCount; /* 0x08 */ U16 QueueID; /* 0x0A */ } MPI3_DELETE_REPLY_QUEUE_REQUEST, MPI3_POINTER PTR_MPI3_DELETE_REPLY_QUEUE_REQUEST, Mpi3DeleteReplyQueueRequest_t, MPI3_POINTER pMpi3DeleteReplyQueueRequest_t; /***************************************************************************** * PortEnable Request Message * ****************************************************************************/ typedef struct _MPI3_PORT_ENABLE_REQUEST { U16 HostTag; /* 0x00 */ U8 IOCUseOnly02; /* 0x02 */ U8 Function; /* 0x03 */ U16 IOCUseOnly04; /* 0x04 */ U8 IOCUseOnly06; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U16 ChangeCount; /* 0x08 */ U16 Reserved0A; /* 0x0A */ } MPI3_PORT_ENABLE_REQUEST, MPI3_POINTER PTR_MPI3_PORT_ENABLE_REQUEST, Mpi3PortEnableRequest_t, MPI3_POINTER pMpi3PortEnableRequest_t; /***************************************************************************** * IOC Events and Event Management * ****************************************************************************/ #define MPI3_EVENT_LOG_DATA (0x01) #define MPI3_EVENT_CHANGE (0x02) #define MPI3_EVENT_GPIO_INTERRUPT (0x04) #define MPI3_EVENT_CABLE_MGMT (0x06) #define MPI3_EVENT_DEVICE_ADDED (0x07) #define MPI3_EVENT_DEVICE_INFO_CHANGED (0x08) #define MPI3_EVENT_PREPARE_FOR_RESET (0x09) #define MPI3_EVENT_COMP_IMAGE_ACT_START (0x0A) #define MPI3_EVENT_ENCL_DEVICE_ADDED (0x0B) #define MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE (0x0C) #define MPI3_EVENT_DEVICE_STATUS_CHANGE (0x0D) #define MPI3_EVENT_ENERGY_PACK_CHANGE (0x0E) #define MPI3_EVENT_SAS_DISCOVERY (0x11) #define MPI3_EVENT_SAS_BROADCAST_PRIMITIVE (0x12) #define MPI3_EVENT_SAS_NOTIFY_PRIMITIVE (0x13) #define MPI3_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x14) #define MPI3_EVENT_SAS_INIT_TABLE_OVERFLOW (0x15) #define MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST (0x16) #define MPI3_EVENT_SAS_PHY_COUNTER (0x18) #define MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR (0x19) #define MPI3_EVENT_PCIE_TOPOLOGY_CHANGE_LIST (0x20) #define MPI3_EVENT_PCIE_ENUMERATION (0x22) #define MPI3_EVENT_PCIE_ERROR_THRESHOLD (0x23) #define MPI3_EVENT_HARD_RESET_RECEIVED (0x40) #define MPI3_EVENT_DIAGNOSTIC_BUFFER_STATUS_CHANGE (0x50) #define MPI3_EVENT_MIN_PRODUCT_SPECIFIC (0x60) #define MPI3_EVENT_MAX_PRODUCT_SPECIFIC (0x7F) /***************************************************************************** * Event Notification Request Message * ****************************************************************************/ #define MPI3_EVENT_NOTIFY_EVENTMASK_WORDS (4) typedef struct _MPI3_EVENT_NOTIFICATION_REQUEST { U16 HostTag; /* 0x00 */ U8 IOCUseOnly02; /* 0x02 */ U8 Function; /* 0x03 */ U16 IOCUseOnly04; /* 0x04 */ U8 IOCUseOnly06; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U16 ChangeCount; /* 0x08 */ U16 Reserved0A; /* 0x0A */ U16 SASBroadcastPrimitiveMasks; /* 0x0C */ U16 SASNotifyPrimitiveMasks; /* 0x0E */ U32 EventMasks[MPI3_EVENT_NOTIFY_EVENTMASK_WORDS]; /* 0x10 */ } MPI3_EVENT_NOTIFICATION_REQUEST, MPI3_POINTER PTR_MPI3_EVENT_NOTIFICATION_REQUEST, Mpi3EventNotificationRequest_t, MPI3_POINTER pMpi3EventNotificationRequest_t; /**** Defines for the SASBroadcastPrimitiveMasks field - use MPI3_EVENT_PRIMITIVE_ values ****/ /**** Defines for the SASNotifyPrimitiveMasks field - use MPI3_EVENT_NOTIFY_ values ****/ /**** Defines for the EventMasks field - use MPI3_EVENT_ values ****/ /***************************************************************************** * Event Notification Reply Message * ****************************************************************************/ typedef struct _MPI3_EVENT_NOTIFICATION_REPLY { U16 HostTag; /* 0x00 */ U8 IOCUseOnly02; /* 0x02 */ U8 Function; /* 0x03 */ U16 IOCUseOnly04; /* 0x04 */ U8 IOCUseOnly06; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U16 IOCUseOnly08; /* 0x08 */ U16 IOCStatus; /* 0x0A */ U32 IOCLogInfo; /* 0x0C */ U8 EventDataLength; /* 0x10 */ U8 Event; /* 0x11 */ U16 IOCChangeCount; /* 0x12 */ U32 EventContext; /* 0x14 */ U32 EventData[1]; /* 0x18 */ } MPI3_EVENT_NOTIFICATION_REPLY, MPI3_POINTER PTR_MPI3_EVENT_NOTIFICATION_REPLY, Mpi3EventNotificationReply_t, MPI3_POINTER pMpi3EventNotificationReply_t; /**** Defines for the MsgFlags field ****/ #define MPI3_EVENT_NOTIFY_MSGFLAGS_ACK_MASK (0x01) #define MPI3_EVENT_NOTIFY_MSGFLAGS_ACK_REQUIRED (0x01) #define MPI3_EVENT_NOTIFY_MSGFLAGS_ACK_NOT_REQUIRED (0x00) #define MPI3_EVENT_NOTIFY_MSGFLAGS_EVENT_ORIGINALITY_MASK (0x02) #define MPI3_EVENT_NOTIFY_MSGFLAGS_EVENT_ORIGINALITY_ORIGINAL (0x00) #define MPI3_EVENT_NOTIFY_MSGFLAGS_EVENT_ORIGINALITY_REPLAY (0x02) /**** Defines for the Event field - use MPI3_EVENT_ values ****/ /***************************************************************************** * GPIO Interrupt Event * ****************************************************************************/ typedef struct _MPI3_EVENT_DATA_GPIO_INTERRUPT { U8 GPIONum; /* 0x00 */ U8 Reserved01[3]; /* 0x01 */ } MPI3_EVENT_DATA_GPIO_INTERRUPT, MPI3_POINTER PTR_MPI3_EVENT_DATA_GPIO_INTERRUPT, Mpi3EventDataGpioInterrupt_t, MPI3_POINTER pMpi3EventDataGpioInterrupt_t; /***************************************************************************** * Cable Management Event * ****************************************************************************/ typedef struct _MPI3_EVENT_DATA_CABLE_MANAGEMENT { U32 ActiveCablePowerRequirement; /* 0x00 */ U8 Status; /* 0x04 */ U8 ReceptacleID; /* 0x05 */ U16 Reserved06; /* 0x06 */ } MPI3_EVENT_DATA_CABLE_MANAGEMENT, MPI3_POINTER PTR_MPI3_EVENT_DATA_CABLE_MANAGEMENT, Mpi3EventDataCableManagement_t, MPI3_POINTER pMpi3EventDataCableManagement_t; /**** Defines for the ActiveCablePowerRequirement field ****/ #define MPI3_EVENT_CABLE_MGMT_ACT_CABLE_PWR_INVALID (0xFFFFFFFF) /**** Defines for the Status field ****/ #define MPI3_EVENT_CABLE_MGMT_STATUS_INSUFFICIENT_POWER (0x00) #define MPI3_EVENT_CABLE_MGMT_STATUS_PRESENT (0x01) #define MPI3_EVENT_CABLE_MGMT_STATUS_DEGRADED (0x02) /***************************************************************************** * Event Ack Request Message * ****************************************************************************/ typedef struct _MPI3_EVENT_ACK_REQUEST { U16 HostTag; /* 0x00 */ U8 IOCUseOnly02; /* 0x02 */ U8 Function; /* 0x03 */ U16 IOCUseOnly04; /* 0x04 */ U8 IOCUseOnly06; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U16 ChangeCount; /* 0x08 */ U16 Reserved0A; /* 0x0A */ U8 Event; /* 0x0C */ U8 Reserved0D[3]; /* 0x0D */ U32 EventContext; /* 0x10 */ } MPI3_EVENT_ACK_REQUEST, MPI3_POINTER PTR_MPI3_EVENT_ACK_REQUEST, Mpi3EventAckRequest_t, MPI3_POINTER pMpi3EventAckRequest_t; /**** Defines for the Event field - use MPI3_EVENT_ values ****/ /***************************************************************************** * Prepare for Reset Event * ****************************************************************************/ typedef struct _MPI3_EVENT_DATA_PREPARE_FOR_RESET { U8 ReasonCode; /* 0x00 */ U8 Reserved01; /* 0x01 */ U16 Reserved02; /* 0x02 */ } MPI3_EVENT_DATA_PREPARE_FOR_RESET, MPI3_POINTER PTR_MPI3_EVENT_DATA_PREPARE_FOR_RESET, Mpi3EventDataPrepareForReset_t, MPI3_POINTER pMpi3EventDataPrepareForReset_t; /**** Defines for the ReasonCode field ****/ #define MPI3_EVENT_PREPARE_RESET_RC_START (0x01) #define MPI3_EVENT_PREPARE_RESET_RC_ABORT (0x02) /***************************************************************************** * Component Image Activation Start Event * ****************************************************************************/ typedef struct _MPI3_EVENT_DATA_COMP_IMAGE_ACTIVATION { U32 Reserved00; /* 0x00 */ } MPI3_EVENT_DATA_COMP_IMAGE_ACTIVATION, MPI3_POINTER PTR_MPI3_EVENT_DATA_COMP_IMAGE_ACTIVATION, Mpi3EventDataCompImageActivation_t, MPI3_POINTER pMpi3EventDataCompImageActivation_t; /***************************************************************************** * Device Added Event * ****************************************************************************/ /* * The Device Added Event Data is exactly the same as Device Page 0 data * (including the Configuration Page header). So, please use/refer to * MPI3_DEVICE_PAGE0 structure for Device Added Event data. */ /**************************************************************************** * Device Info Changed Event * ****************************************************************************/ /* * The Device Info Changed Event Data is exactly the same as Device Page 0 data * (including the Configuration Page header). So, please use/refer to * MPI3_DEVICE_PAGE0 structure for Device Added Event data. */ /***************************************************************************** * Device Status Change Event * ****************************************************************************/ typedef struct _MPI3_EVENT_DATA_DEVICE_STATUS_CHANGE { U16 TaskTag; /* 0x00 */ U8 ReasonCode; /* 0x02 */ U8 IOUnitPort; /* 0x03 */ U16 ParentDevHandle; /* 0x04 */ U16 DevHandle; /* 0x06 */ U64 WWID; /* 0x08 */ U8 LUN[8]; /* 0x10 */ } MPI3_EVENT_DATA_DEVICE_STATUS_CHANGE, MPI3_POINTER PTR_MPI3_EVENT_DATA_DEVICE_STATUS_CHANGE, Mpi3EventDataDeviceStatusChange_t, MPI3_POINTER pMpi3EventDataDeviceStatusChange_t; /**** Defines for the ReasonCode field ****/ #define MPI3_EVENT_DEV_STAT_RC_MOVED (0x01) #define MPI3_EVENT_DEV_STAT_RC_HIDDEN (0x02) #define MPI3_EVENT_DEV_STAT_RC_NOT_HIDDEN (0x03) #define MPI3_EVENT_DEV_STAT_RC_ASYNC_NOTIFICATION (0x04) #define MPI3_EVENT_DEV_STAT_RC_INT_DEVICE_RESET_STRT (0x20) #define MPI3_EVENT_DEV_STAT_RC_INT_DEVICE_RESET_CMP (0x21) #define MPI3_EVENT_DEV_STAT_RC_INT_TASK_ABORT_STRT (0x22) #define MPI3_EVENT_DEV_STAT_RC_INT_TASK_ABORT_CMP (0x23) #define MPI3_EVENT_DEV_STAT_RC_INT_IT_NEXUS_RESET_STRT (0x24) #define MPI3_EVENT_DEV_STAT_RC_INT_IT_NEXUS_RESET_CMP (0x25) #define MPI3_EVENT_DEV_STAT_RC_PCIE_HOT_RESET_FAILED (0x30) #define MPI3_EVENT_DEV_STAT_RC_EXPANDER_REDUCED_FUNC_STRT (0x40) #define MPI3_EVENT_DEV_STAT_RC_EXPANDER_REDUCED_FUNC_CMP (0x41) #define MPI3_EVENT_DEV_STAT_RC_VD_NOT_RESPONDING (0x50) /***************************************************************************** * Energy Pack Change Event * ****************************************************************************/ typedef struct _MPI3_EVENT_DATA_ENERGY_PACK_CHANGE { U32 Reserved00; /* 0x00 */ U16 ShutdownTimeout; /* 0x04 */ U16 Reserved06; /* 0x06 */ } MPI3_EVENT_DATA_ENERGY_PACK_CHANGE, MPI3_POINTER PTR_MPI3_EVENT_DATA_ENERGY_PACK_CHANGE, Mpi3EventDataEnergyPackChange_t, MPI3_POINTER pMpi3EventDataEnergyPackChange_t; /***************************************************************************** * SAS Discovery Event * ****************************************************************************/ typedef struct _MPI3_EVENT_DATA_SAS_DISCOVERY { U8 Flags; /* 0x00 */ U8 ReasonCode; /* 0x01 */ U8 IOUnitPort; /* 0x02 */ U8 Reserved03; /* 0x03 */ U32 DiscoveryStatus; /* 0x04 */ } MPI3_EVENT_DATA_SAS_DISCOVERY, MPI3_POINTER PTR_MPI3_EVENT_DATA_SAS_DISCOVERY, Mpi3EventDataSasDiscovery_t, MPI3_POINTER pMpi3EventDataSasDiscovery_t; /**** Defines for the Flags field ****/ #define MPI3_EVENT_SAS_DISC_FLAGS_DEVICE_CHANGE (0x02) #define MPI3_EVENT_SAS_DISC_FLAGS_IN_PROGRESS (0x01) /**** Defines for the ReasonCode field ****/ #define MPI3_EVENT_SAS_DISC_RC_STARTED (0x01) #define MPI3_EVENT_SAS_DISC_RC_COMPLETED (0x02) /**** Defines for the DiscoveryStatus field ****/ #define MPI3_SAS_DISC_STATUS_MAX_ENCLOSURES_EXCEED (0x80000000) #define MPI3_SAS_DISC_STATUS_MAX_EXPANDERS_EXCEED (0x40000000) #define MPI3_SAS_DISC_STATUS_MAX_DEVICES_EXCEED (0x20000000) #define MPI3_SAS_DISC_STATUS_MAX_TOPO_PHYS_EXCEED (0x10000000) #define MPI3_SAS_DISC_STATUS_INVALID_CEI (0x00010000) #define MPI3_SAS_DISC_STATUS_FECEI_MISMATCH (0x00008000) #define MPI3_SAS_DISC_STATUS_MULTIPLE_DEVICES_IN_SLOT (0x00004000) #define MPI3_SAS_DISC_STATUS_NECEI_MISMATCH (0x00002000) #define MPI3_SAS_DISC_STATUS_TOO_MANY_SLOTS (0x00001000) #define MPI3_SAS_DISC_STATUS_EXP_MULTI_SUBTRACTIVE (0x00000800) #define MPI3_SAS_DISC_STATUS_MULTI_PORT_DOMAIN (0x00000400) #define MPI3_SAS_DISC_STATUS_TABLE_TO_SUBTRACTIVE_LINK (0x00000200) #define MPI3_SAS_DISC_STATUS_UNSUPPORTED_DEVICE (0x00000100) #define MPI3_SAS_DISC_STATUS_TABLE_LINK (0x00000080) #define MPI3_SAS_DISC_STATUS_SUBTRACTIVE_LINK (0x00000040) #define MPI3_SAS_DISC_STATUS_SMP_CRC_ERROR (0x00000020) #define MPI3_SAS_DISC_STATUS_SMP_FUNCTION_FAILED (0x00000010) #define MPI3_SAS_DISC_STATUS_SMP_TIMEOUT (0x00000008) #define MPI3_SAS_DISC_STATUS_MULTIPLE_PORTS (0x00000004) #define MPI3_SAS_DISC_STATUS_INVALID_SAS_ADDRESS (0x00000002) #define MPI3_SAS_DISC_STATUS_LOOP_DETECTED (0x00000001) /***************************************************************************** * SAS Broadcast Primitive Event * ****************************************************************************/ typedef struct _MPI3_EVENT_DATA_SAS_BROADCAST_PRIMITIVE { U8 PhyNum; /* 0x00 */ U8 IOUnitPort; /* 0x01 */ U8 PortWidth; /* 0x02 */ U8 Primitive; /* 0x03 */ } MPI3_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, MPI3_POINTER PTR_MPI3_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, Mpi3EventDataSasBroadcastPrimitive_t, MPI3_POINTER pMpi3EventDataSasBroadcastPrimitive_t; /**** Defines for the Primitive field ****/ #define MPI3_EVENT_BROADCAST_PRIMITIVE_CHANGE (0x01) #define MPI3_EVENT_BROADCAST_PRIMITIVE_SES (0x02) #define MPI3_EVENT_BROADCAST_PRIMITIVE_EXPANDER (0x03) #define MPI3_EVENT_BROADCAST_PRIMITIVE_ASYNCHRONOUS_EVENT (0x04) #define MPI3_EVENT_BROADCAST_PRIMITIVE_RESERVED3 (0x05) #define MPI3_EVENT_BROADCAST_PRIMITIVE_RESERVED4 (0x06) #define MPI3_EVENT_BROADCAST_PRIMITIVE_CHANGE0_RESERVED (0x07) #define MPI3_EVENT_BROADCAST_PRIMITIVE_CHANGE1_RESERVED (0x08) /***************************************************************************** * SAS Notify Primitive Event * ****************************************************************************/ typedef struct _MPI3_EVENT_DATA_SAS_NOTIFY_PRIMITIVE { U8 PhyNum; /* 0x00 */ U8 IOUnitPort; /* 0x01 */ U8 Reserved02; /* 0x02 */ U8 Primitive; /* 0x03 */ } MPI3_EVENT_DATA_SAS_NOTIFY_PRIMITIVE, MPI3_POINTER PTR_MPI3_EVENT_DATA_SAS_NOTIFY_PRIMITIVE, Mpi3EventDataSasNotifyPrimitive_t, MPI3_POINTER pMpi3EventDataSasNotifyPrimitive_t; /**** Defines for the Primitive field ****/ #define MPI3_EVENT_NOTIFY_PRIMITIVE_ENABLE_SPINUP (0x01) #define MPI3_EVENT_NOTIFY_PRIMITIVE_POWER_LOSS_EXPECTED (0x02) #define MPI3_EVENT_NOTIFY_PRIMITIVE_RESERVED1 (0x03) #define MPI3_EVENT_NOTIFY_PRIMITIVE_RESERVED2 (0x04) /***************************************************************************** * SAS Topology Change List Event * ****************************************************************************/ #ifndef MPI3_EVENT_SAS_TOPO_PHY_COUNT #define MPI3_EVENT_SAS_TOPO_PHY_COUNT (1) #endif /* MPI3_EVENT_SAS_TOPO_PHY_COUNT */ typedef struct _MPI3_EVENT_SAS_TOPO_PHY_ENTRY { U16 AttachedDevHandle; /* 0x00 */ U8 LinkRate; /* 0x02 */ U8 Status; /* 0x03 */ } MPI3_EVENT_SAS_TOPO_PHY_ENTRY, MPI3_POINTER PTR_MPI3_EVENT_SAS_TOPO_PHY_ENTRY, Mpi3EventSasTopoPhyEntry_t, MPI3_POINTER pMpi3EventSasTopoPhyEntry_t; /**** Defines for the LinkRate field ****/ #define MPI3_EVENT_SAS_TOPO_LR_CURRENT_MASK (0xF0) #define MPI3_EVENT_SAS_TOPO_LR_CURRENT_SHIFT (4) #define MPI3_EVENT_SAS_TOPO_LR_PREV_MASK (0x0F) #define MPI3_EVENT_SAS_TOPO_LR_PREV_SHIFT (0) #define MPI3_EVENT_SAS_TOPO_LR_UNKNOWN_LINK_RATE (0x00) #define MPI3_EVENT_SAS_TOPO_LR_PHY_DISABLED (0x01) #define MPI3_EVENT_SAS_TOPO_LR_NEGOTIATION_FAILED (0x02) #define MPI3_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE (0x03) #define MPI3_EVENT_SAS_TOPO_LR_PORT_SELECTOR (0x04) #define MPI3_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS (0x05) #define MPI3_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY (0x06) #define MPI3_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0A) #define MPI3_EVENT_SAS_TOPO_LR_RATE_12_0 (0x0B) #define MPI3_EVENT_SAS_TOPO_LR_RATE_22_5 (0x0C) /**** Defines for the PhyStatus field ****/ #define MPI3_EVENT_SAS_TOPO_PHY_STATUS_MASK (0xC0) #define MPI3_EVENT_SAS_TOPO_PHY_STATUS_SHIFT (6) #define MPI3_EVENT_SAS_TOPO_PHY_STATUS_ACCESSIBLE (0x00) #define MPI3_EVENT_SAS_TOPO_PHY_STATUS_NO_EXIST (0x40) #define MPI3_EVENT_SAS_TOPO_PHY_STATUS_VACANT (0x80) #define MPI3_EVENT_SAS_TOPO_PHY_RC_MASK (0x0F) #define MPI3_EVENT_SAS_TOPO_PHY_RC_TARG_NOT_RESPONDING (0x02) #define MPI3_EVENT_SAS_TOPO_PHY_RC_PHY_CHANGED (0x03) #define MPI3_EVENT_SAS_TOPO_PHY_RC_NO_CHANGE (0x04) #define MPI3_EVENT_SAS_TOPO_PHY_RC_DELAY_NOT_RESPONDING (0x05) #define MPI3_EVENT_SAS_TOPO_PHY_RC_RESPONDING (0x06) typedef struct _MPI3_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST { U16 EnclosureHandle; /* 0x00 */ U16 ExpanderDevHandle; /* 0x02 */ U8 NumPhys; /* 0x04 */ U8 Reserved05[3]; /* 0x05 */ U8 NumEntries; /* 0x08 */ U8 StartPhyNum; /* 0x09 */ U8 ExpStatus; /* 0x0A */ U8 IOUnitPort; /* 0x0B */ MPI3_EVENT_SAS_TOPO_PHY_ENTRY PhyEntry[MPI3_EVENT_SAS_TOPO_PHY_COUNT]; /* 0x0C */ } MPI3_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, MPI3_POINTER PTR_MPI3_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, Mpi3EventDataSasTopologyChangeList_t, MPI3_POINTER pMpi3EventDataSasTopologyChangeList_t; /**** Defines for the ExpStatus field ****/ #define MPI3_EVENT_SAS_TOPO_ES_NO_EXPANDER (0x00) #define MPI3_EVENT_SAS_TOPO_ES_NOT_RESPONDING (0x02) #define MPI3_EVENT_SAS_TOPO_ES_RESPONDING (0x03) #define MPI3_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING (0x04) /***************************************************************************** * SAS PHY Counter Event * ****************************************************************************/ typedef struct _MPI3_EVENT_DATA_SAS_PHY_COUNTER { U64 TimeStamp; /* 0x00 */ U32 Reserved08; /* 0x08 */ U8 PhyEventCode; /* 0x0C */ U8 PhyNum; /* 0x0D */ U16 Reserved0E; /* 0x0E */ U32 PhyEventInfo; /* 0x10 */ U8 CounterType; /* 0x14 */ U8 ThresholdWindow; /* 0x15 */ U8 TimeUnits; /* 0x16 */ U8 Reserved17; /* 0x17 */ U32 EventThreshold; /* 0x18 */ U16 ThresholdFlags; /* 0x1C */ U16 Reserved1E; /* 0x1E */ } MPI3_EVENT_DATA_SAS_PHY_COUNTER, MPI3_POINTER PTR_MPI3_EVENT_DATA_SAS_PHY_COUNTER, Mpi3EventDataSasPhyCounter_t, MPI3_POINTER pMpi3EventDataSasPhyCounter_t; /**** Defines for the PhyEventCode field - use MPI3_SASPHY3_EVENT_CODE_ defines ****/ /**** Defines for the CounterType field - use MPI3_SASPHY3_COUNTER_TYPE_ defines ****/ /**** Defines for the TimeUnits field - use MPI3_SASPHY3_TIME_UNITS_ defines ****/ /**** Defines for the ThresholdFlags field - use MPI3_SASPHY3_TFLAGS_ defines ****/ /***************************************************************************** * SAS Device Discovery Error Event * ****************************************************************************/ typedef struct _MPI3_EVENT_DATA_SAS_DEVICE_DISC_ERR { U16 DevHandle; /* 0x00 */ U8 ReasonCode; /* 0x02 */ U8 IOUnitPort; /* 0x03 */ U32 Reserved04; /* 0x04 */ U64 SASAddress; /* 0x08 */ } MPI3_EVENT_DATA_SAS_DEVICE_DISC_ERR, MPI3_POINTER PTR_MPI3_EVENT_DATA_SAS_DEVICE_DISC_ERR, Mpi3EventDataSasDeviceDiscErr_t, MPI3_POINTER pMpi3EventDataSasDeviceDiscErr_t; /**** Defines for the ReasonCode field ****/ #define MPI3_EVENT_SAS_DISC_ERR_RC_SMP_FAILED (0x01) #define MPI3_EVENT_SAS_DISC_ERR_RC_SMP_TIMEOUT (0x02) /***************************************************************************** * PCIe Enumeration Event * ****************************************************************************/ typedef struct _MPI3_EVENT_DATA_PCIE_ENUMERATION { U8 Flags; /* 0x00 */ U8 ReasonCode; /* 0x01 */ U8 IOUnitPort; /* 0x02 */ U8 Reserved03; /* 0x03 */ U32 EnumerationStatus; /* 0x04 */ } MPI3_EVENT_DATA_PCIE_ENUMERATION, MPI3_POINTER PTR_MPI3_EVENT_DATA_PCIE_ENUMERATION, Mpi3EventDataPcieEnumeration_t, MPI3_POINTER pMpi3EventDataPcieEnumeration_t; /**** Defines for the Flags field ****/ #define MPI3_EVENT_PCIE_ENUM_FLAGS_DEVICE_CHANGE (0x02) #define MPI3_EVENT_PCIE_ENUM_FLAGS_IN_PROGRESS (0x01) /**** Defines for the ReasonCode field ****/ #define MPI3_EVENT_PCIE_ENUM_RC_STARTED (0x01) #define MPI3_EVENT_PCIE_ENUM_RC_COMPLETED (0x02) /**** Defines for the EnumerationStatus field ****/ #define MPI3_EVENT_PCIE_ENUM_ES_MAX_SWITCH_DEPTH_EXCEED (0x80000000) #define MPI3_EVENT_PCIE_ENUM_ES_MAX_SWITCHES_EXCEED (0x40000000) #define MPI3_EVENT_PCIE_ENUM_ES_MAX_DEVICES_EXCEED (0x20000000) #define MPI3_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED (0x10000000) /***************************************************************************** * PCIe Topology Change List Event * ****************************************************************************/ #ifndef MPI3_EVENT_PCIE_TOPO_PORT_COUNT #define MPI3_EVENT_PCIE_TOPO_PORT_COUNT (1) #endif /* MPI3_EVENT_PCIE_TOPO_PORT_COUNT */ typedef struct _MPI3_EVENT_PCIE_TOPO_PORT_ENTRY { U16 AttachedDevHandle; /* 0x00 */ U8 PortStatus; /* 0x02 */ U8 Reserved03; /* 0x03 */ U8 CurrentPortInfo; /* 0x04 */ U8 Reserved05; /* 0x05 */ U8 PreviousPortInfo; /* 0x06 */ U8 Reserved07; /* 0x07 */ } MPI3_EVENT_PCIE_TOPO_PORT_ENTRY, MPI3_POINTER PTR_MPI3_EVENT_PCIE_TOPO_PORT_ENTRY, Mpi3EventPcieTopoPortEntry_t, MPI3_POINTER pMpi3EventPcieTopoPortEntry_t; /**** Defines for the PortStatus field ****/ #define MPI3_EVENT_PCIE_TOPO_PS_NOT_RESPONDING (0x02) #define MPI3_EVENT_PCIE_TOPO_PS_PORT_CHANGED (0x03) #define MPI3_EVENT_PCIE_TOPO_PS_NO_CHANGE (0x04) #define MPI3_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING (0x05) #define MPI3_EVENT_PCIE_TOPO_PS_RESPONDING (0x06) /**** Defines for the CurrentPortInfo and PreviousPortInfo field ****/ #define MPI3_EVENT_PCIE_TOPO_PI_LANES_MASK (0xF0) #define MPI3_EVENT_PCIE_TOPO_PI_LANES_UNKNOWN (0x00) #define MPI3_EVENT_PCIE_TOPO_PI_LANES_1 (0x10) #define MPI3_EVENT_PCIE_TOPO_PI_LANES_2 (0x20) #define MPI3_EVENT_PCIE_TOPO_PI_LANES_4 (0x30) #define MPI3_EVENT_PCIE_TOPO_PI_LANES_8 (0x40) #define MPI3_EVENT_PCIE_TOPO_PI_LANES_16 (0x50) #define MPI3_EVENT_PCIE_TOPO_PI_RATE_MASK (0x0F) #define MPI3_EVENT_PCIE_TOPO_PI_RATE_UNKNOWN (0x00) #define MPI3_EVENT_PCIE_TOPO_PI_RATE_DISABLED (0x01) #define MPI3_EVENT_PCIE_TOPO_PI_RATE_2_5 (0x02) #define MPI3_EVENT_PCIE_TOPO_PI_RATE_5_0 (0x03) #define MPI3_EVENT_PCIE_TOPO_PI_RATE_8_0 (0x04) #define MPI3_EVENT_PCIE_TOPO_PI_RATE_16_0 (0x05) #define MPI3_EVENT_PCIE_TOPO_PI_RATE_32_0 (0x06) typedef struct _MPI3_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST { U16 EnclosureHandle; /* 0x00 */ U16 SwitchDevHandle; /* 0x02 */ U8 NumPorts; /* 0x04 */ U8 Reserved05[3]; /* 0x05 */ U8 NumEntries; /* 0x08 */ U8 StartPortNum; /* 0x09 */ U8 SwitchStatus; /* 0x0A */ U8 IOUnitPort; /* 0x0B */ U32 Reserved0C; /* 0x0C */ MPI3_EVENT_PCIE_TOPO_PORT_ENTRY PortEntry[MPI3_EVENT_PCIE_TOPO_PORT_COUNT]; /* 0x10 */ } MPI3_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST, MPI3_POINTER PTR_MPI3_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST, Mpi3EventDataPcieTopologyChangeList_t, MPI3_POINTER pMpi3EventDataPcieTopologyChangeList_t; /**** Defines for the SwitchStatus field ****/ #define MPI3_EVENT_PCIE_TOPO_SS_NO_PCIE_SWITCH (0x00) #define MPI3_EVENT_PCIE_TOPO_SS_NOT_RESPONDING (0x02) #define MPI3_EVENT_PCIE_TOPO_SS_RESPONDING (0x03) #define MPI3_EVENT_PCIE_TOPO_SS_DELAY_NOT_RESPONDING (0x04) /***************************************************************************** * PCIe Error Threshold Event * ****************************************************************************/ typedef struct _MPI3_EVENT_DATA_PCIE_ERROR_THRESHOLD { U64 Timestamp; /* 0x00 */ U8 ReasonCode; /* 0x08 */ U8 Port; /* 0x09 */ U16 SwitchDevHandle; /* 0x0A */ U8 Error; /* 0x0C */ U8 Action; /* 0x0D */ U16 ThresholdCount; /* 0x0E */ U16 AttachedDevHandle; /* 0x10 */ U16 Reserved12; /* 0x12 */ U32 Reserved14; /* 0x14 */ } MPI3_EVENT_DATA_PCIE_ERROR_THRESHOLD, MPI3_POINTER PTR_MPI3_EVENT_DATA_PCIE_ERROR_THRESHOLD, Mpi3EventDataPcieErrorThreshold_t, MPI3_POINTER pMpi3EventDataPcieErrorThreshold_t; /**** Defines for the ReasonCode field ****/ #define MPI3_EVENT_PCI_ERROR_RC_THRESHOLD_EXCEEDED (0x00) #define MPI3_EVENT_PCI_ERROR_RC_ESCALATION (0x01) /**** Defines for the Error field - use MPI3_PCIEIOUNIT3_ERROR_ values ****/ /**** Defines for the Action field - use MPI3_PCIEIOUNIT3_ACTION_ values ****/ /**************************************************************************** * Enclosure Device Added Event * ****************************************************************************/ /* * The Enclosure Device Added Event Data is exactly the same as Enclosure * Page 0 data (including the Configuration Page header). So, please * use/refer to MPI3_ENCLOSURE_PAGE0 structure for Enclosure Device Added * Event data. */ /**************************************************************************** * Enclosure Device Changed Event * ****************************************************************************/ /* * The Enclosure Device Change Event Data is exactly the same as Enclosure * Page 0 data (including the Configuration Page header). So, please * use/refer to MPI3_ENCLOSURE_PAGE0 structure for Enclosure Device Change * Event data. */ /***************************************************************************** * SAS Initiator Device Status Change Event * ****************************************************************************/ typedef struct _MPI3_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE { U8 ReasonCode; /* 0x00 */ U8 IOUnitPort; /* 0x01 */ U16 DevHandle; /* 0x02 */ U32 Reserved04; /* 0x04 */ U64 SASAddress; /* 0x08 */ } MPI3_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, MPI3_POINTER PTR_MPI3_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, Mpi3EventDataSasInitDevStatusChange_t, MPI3_POINTER pMpi3EventDataSasInitDevStatusChange_t; /**** Defines for the ReasonCode field ****/ #define MPI3_EVENT_SAS_INIT_RC_ADDED (0x01) #define MPI3_EVENT_SAS_INIT_RC_NOT_RESPONDING (0x02) /***************************************************************************** * SAS Initiator Device Table Overflow Event * ****************************************************************************/ typedef struct _MPI3_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW { U16 MaxInit; /* 0x00 */ U16 CurrentInit; /* 0x02 */ U32 Reserved04; /* 0x04 */ U64 SASAddress; /* 0x08 */ } MPI3_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, MPI3_POINTER PTR_MPI3_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, Mpi3EventDataSasInitTableOverflow_t, MPI3_POINTER pMpi3EventDataSasInitTableOverflow_t; /***************************************************************************** * Hard Reset Received Event * ****************************************************************************/ typedef struct _MPI3_EVENT_DATA_HARD_RESET_RECEIVED { U8 Reserved00; /* 0x00 */ U8 IOUnitPort; /* 0x01 */ U16 Reserved02; /* 0x02 */ } MPI3_EVENT_DATA_HARD_RESET_RECEIVED, MPI3_POINTER PTR_MPI3_EVENT_DATA_HARD_RESET_RECEIVED, Mpi3EventDataHardResetReceived_t, MPI3_POINTER pMpi3EventDataHardResetReceived_t; /***************************************************************************** * Diagnostic Tool Events * *****************************************************************************/ /***************************************************************************** * Diagnostic Buffer Status Change Event * *****************************************************************************/ typedef struct _MPI3_EVENT_DATA_DIAG_BUFFER_STATUS_CHANGE { U8 Type; /* 0x00 */ U8 ReasonCode; /* 0x01 */ U16 Reserved02; /* 0x02 */ U32 Reserved04; /* 0x04 */ } MPI3_EVENT_DATA_DIAG_BUFFER_STATUS_CHANGE, MPI3_POINTER PTR_MPI3_EVENT_DATA_DIAG_BUFFER_STATUS_CHANGE, Mpi3EventDataDiagBufferStatusChange_t, MPI3_POINTER pMpi3EventDataDiagBufferStatusChange_t; /**** Defines for the Type field - use MPI3_DIAG_BUFFER_TYPE_ values ****/ /**** Defines for the ReasonCode field ****/ #define MPI3_EVENT_DIAG_BUFFER_STATUS_CHANGE_RC_RELEASED (0x01) #define MPI3_EVENT_DIAG_BUFFER_STATUS_CHANGE_RC_PAUSED (0x02) #define MPI3_EVENT_DIAG_BUFFER_STATUS_CHANGE_RC_RESUMED (0x03) /***************************************************************************** * Persistent Event Logs * ****************************************************************************/ /**** Definitions for the Locale field ****/ #define MPI3_PEL_LOCALE_FLAGS_NON_BLOCKING_BOOT_EVENT (0x0200) #define MPI3_PEL_LOCALE_FLAGS_BLOCKING_BOOT_EVENT (0x0100) #define MPI3_PEL_LOCALE_FLAGS_PCIE (0x0080) #define MPI3_PEL_LOCALE_FLAGS_CONFIGURATION (0x0040) #define MPI3_PEL_LOCALE_FLAGS_CONTROLER (0x0020) #define MPI3_PEL_LOCALE_FLAGS_SAS (0x0010) #define MPI3_PEL_LOCALE_FLAGS_EPACK (0x0008) #define MPI3_PEL_LOCALE_FLAGS_ENCLOSURE (0x0004) #define MPI3_PEL_LOCALE_FLAGS_PD (0x0002) #define MPI3_PEL_LOCALE_FLAGS_VD (0x0001) /**** Definitions for the Class field ****/ #define MPI3_PEL_CLASS_DEBUG (0x00) #define MPI3_PEL_CLASS_PROGRESS (0x01) #define MPI3_PEL_CLASS_INFORMATIONAL (0x02) #define MPI3_PEL_CLASS_WARNING (0x03) #define MPI3_PEL_CLASS_CRITICAL (0x04) #define MPI3_PEL_CLASS_FATAL (0x05) #define MPI3_PEL_CLASS_FAULT (0x06) /**** Definitions for the ClearType field ****/ #define MPI3_PEL_CLEARTYPE_CLEAR (0x00) /**** Definitions for the WaitTime field ****/ #define MPI3_PEL_WAITTIME_INFINITE_WAIT (0x00) /**** Definitions for the Action field ****/ #define MPI3_PEL_ACTION_GET_SEQNUM (0x01) #define MPI3_PEL_ACTION_MARK_CLEAR (0x02) #define MPI3_PEL_ACTION_GET_LOG (0x03) #define MPI3_PEL_ACTION_GET_COUNT (0x04) #define MPI3_PEL_ACTION_WAIT (0x05) #define MPI3_PEL_ACTION_ABORT (0x06) #define MPI3_PEL_ACTION_GET_PRINT_STRINGS (0x07) #define MPI3_PEL_ACTION_ACKNOWLEDGE (0x08) /**** Definitions for the LogStatus field ****/ #define MPI3_PEL_STATUS_SUCCESS (0x00) #define MPI3_PEL_STATUS_NOT_FOUND (0x01) #define MPI3_PEL_STATUS_ABORTED (0x02) #define MPI3_PEL_STATUS_NOT_READY (0x03) /**************************************************************************** * PEL Sequence Numbers * ****************************************************************************/ typedef struct _MPI3_PEL_SEQ { U32 Newest; /* 0x00 */ U32 Oldest; /* 0x04 */ U32 Clear; /* 0x08 */ U32 Shutdown; /* 0x0C */ U32 Boot; /* 0x10 */ U32 LastAcknowledged; /* 0x14 */ } MPI3_PEL_SEQ, MPI3_POINTER PTR_MPI3_PEL_SEQ, Mpi3PELSeq_t, MPI3_POINTER pMpi3PELSeq_t; /**************************************************************************** * PEL Entry * ****************************************************************************/ typedef struct _MPI3_PEL_ENTRY { U64 TimeStamp; /* 0x00 */ U32 SequenceNumber; /* 0x08 */ U16 LogCode; /* 0x0C */ U16 ArgType; /* 0x0E */ U16 Locale; /* 0x10 */ U8 Class; /* 0x12 */ U8 Flags; /* 0x13 */ U8 ExtNum; /* 0x14 */ U8 NumExts; /* 0x15 */ U8 ArgDataSize; /* 0x16 */ U8 FixedFormatStringsSize; /* 0x17 */ U32 Reserved18[2]; /* 0x18 */ U32 PELInfo[24]; /* 0x20 - 0x7F */ } MPI3_PEL_ENTRY, MPI3_POINTER PTR_MPI3_PEL_ENTRY, Mpi3PELEntry_t, MPI3_POINTER pMpi3PELEntry_t; /**** Definitions for the Flags field ****/ #define MPI3_PEL_FLAGS_COMPLETE_RESET_NEEDED (0x02) #define MPI3_PEL_FLAGS_ACK_NEEDED (0x01) /**************************************************************************** * PEL Event List * ****************************************************************************/ typedef struct _MPI3_PEL_LIST { U32 LogCount; /* 0x00 */ U32 Reserved04; /* 0x04 */ MPI3_PEL_ENTRY Entry[1]; /* 0x08 */ /* variable length */ } MPI3_PEL_LIST, MPI3_POINTER PTR_MPI3_PEL_LIST, Mpi3PELList_t, MPI3_POINTER pMpi3PELList_t; /**************************************************************************** * PEL Count Data * ****************************************************************************/ typedef U32 MPI3_PEL_LOG_COUNT, MPI3_POINTER PTR_MPI3_PEL_LOG_COUNT, Mpi3PELLogCount_t, MPI3_POINTER pMpi3PELLogCount_t; /**************************************************************************** * PEL Arg Map * ****************************************************************************/ typedef struct _MPI3_PEL_ARG_MAP { U8 ArgType; /* 0x00 */ U8 Length; /* 0x01 */ U16 StartLocation; /* 0x02 */ } MPI3_PEL_ARG_MAP, MPI3_POINTER PTR_MPI3_PEL_ARG_MAP, Mpi3PELArgMap_t, MPI3_POINTER pMpi3PELArgMap_t; /**** Definitions for the ArgType field ****/ #define MPI3_PEL_ARG_MAP_ARG_TYPE_APPEND_STRING (0x00) #define MPI3_PEL_ARG_MAP_ARG_TYPE_INTEGER (0x01) #define MPI3_PEL_ARG_MAP_ARG_TYPE_STRING (0x02) #define MPI3_PEL_ARG_MAP_ARG_TYPE_BIT_FIELD (0x03) /**************************************************************************** * PEL Print String * ****************************************************************************/ typedef struct _MPI3_PEL_PRINT_STRING { U16 LogCode; /* 0x00 */ U16 StringLength; /* 0x02 */ U8 NumArgMap; /* 0x04 */ U8 Reserved05[3]; /* 0x05 */ MPI3_PEL_ARG_MAP ArgMap[1]; /* 0x08 */ /* variable length */ /* FormatString - offset must be calculated */ /* variable length */ } MPI3_PEL_PRINT_STRING, MPI3_POINTER PTR_MPI3_PEL_PRINT_STRING, Mpi3PELPrintString_t, MPI3_POINTER pMpi3PELPrintString_t; /**************************************************************************** * PEL Print String List * ****************************************************************************/ typedef struct _MPI3_PEL_PRINT_STRING_LIST { U32 NumPrintStrings; /* 0x00 */ U32 ResidualBytesRemain; /* 0x04 */ U32 Reserved08[2]; /* 0x08 */ MPI3_PEL_PRINT_STRING PrintString[1]; /* 0x10 */ /* variable length */ } MPI3_PEL_PRINT_STRING_LIST, MPI3_POINTER PTR_MPI3_PEL_PRINT_STRING_LIST, Mpi3PELPrintStringList_t, MPI3_POINTER pMpi3PELPrintStringList_t; /**************************************************************************** * PEL Request Msg - generic to allow header decoding * ****************************************************************************/ #ifndef MPI3_PEL_ACTION_SPECIFIC_MAX #define MPI3_PEL_ACTION_SPECIFIC_MAX (1) #endif /* MPI3_PEL_ACTION_SPECIFIC_MAX */ typedef struct _MPI3_PEL_REQUEST { U16 HostTag; /* 0x00 */ U8 IOCUseOnly02; /* 0x02 */ U8 Function; /* 0x03 */ U16 IOCUseOnly04; /* 0x04 */ U8 IOCUseOnly06; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U16 ChangeCount; /* 0x08 */ U8 Action; /* 0x0A */ U8 Reserved0B; /* 0x0B */ U32 ActionSpecific[MPI3_PEL_ACTION_SPECIFIC_MAX]; /* 0x0C */ /* variable length */ } MPI3_PEL_REQUEST, MPI3_POINTER PTR_MPI3_PEL_REQUEST, Mpi3PELRequest_t, MPI3_POINTER pMpi3PELRequest_t; /**************************************************************************** * PEL ACTION Get Sequence Nembers * ****************************************************************************/ typedef struct _MPI3_PEL_REQ_ACTION_GET_SEQUENCE_NUMBERS { U16 HostTag; /* 0x00 */ U8 IOCUseOnly02; /* 0x02 */ U8 Function; /* 0x03 */ U16 IOCUseOnly04; /* 0x04 */ U8 IOCUseOnly06; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U16 ChangeCount; /* 0x08 */ U8 Action; /* 0x0A */ U8 Reserved0B; /* 0x0B */ U32 Reserved0C[5]; /* 0x0C */ MPI3_SGE_UNION SGL; /* 0x20 */ } MPI3_PEL_REQ_ACTION_GET_SEQUENCE_NUMBERS, MPI3_POINTER PTR_MPI3_PEL_REQ_ACTION_GET_SEQUENCE_NUMBERS, Mpi3PELReqActionGetSequenceNumbers_t, MPI3_POINTER pMpi3PELReqActionGetSequenceNumbers_t; /**************************************************************************** * PEL ACTION Clear Log * ****************************************************************************/ typedef struct _MPI3_PEL_REQ_ACTION_CLEAR_LOG_MARKER { U16 HostTag; /* 0x00 */ U8 IOCUseOnly02; /* 0x02 */ U8 Function; /* 0x03 */ U16 IOCUseOnly04; /* 0x04 */ U8 IOCUseOnly06; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U16 ChangeCount; /* 0x08 */ U8 Action; /* 0x0A */ U8 Reserved0B; /* 0x0B */ U8 ClearType; /* 0x0C */ U8 Reserved0D[3]; /* 0x0D */ } MPI3_PEL_REQ_ACTION_CLEAR_LOG_MARKER, MPI3_POINTER PTR_MPI3_PEL_REQ_ACTION_CLEAR_LOG_MARKER, Mpi3PELReqActionClearLogMMarker_t, MPI3_POINTER pMpi3PELReqActionClearLogMMarker_t; /**************************************************************************** * PEL ACTION Get Log * ****************************************************************************/ typedef struct _MPI3_PEL_REQ_ACTION_GET_LOG { U16 HostTag; /* 0x00 */ U8 IOCUseOnly02; /* 0x02 */ U8 Function; /* 0x03 */ U16 IOCUseOnly04; /* 0x04 */ U8 IOCUseOnly06; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U16 ChangeCount; /* 0x08 */ U8 Action; /* 0x0A */ U8 Reserved0B; /* 0x0B */ U32 StartingSequenceNumber; /* 0x0C */ U16 Locale; /* 0x10 */ U8 Class; /* 0x12 */ U8 Reserved13; /* 0x13 */ U32 Reserved14[3]; /* 0x14 */ MPI3_SGE_UNION SGL; /* 0x20 */ } MPI3_PEL_REQ_ACTION_GET_LOG, MPI3_POINTER PTR_MPI3_PEL_REQ_ACTION_GET_LOG, Mpi3PELReqActionGetLog_t, MPI3_POINTER pMpi3PELReqActionGetLog_t; /**************************************************************************** * PEL ACTION Get Count * ****************************************************************************/ typedef struct _MPI3_PEL_REQ_ACTION_GET_COUNT { U16 HostTag; /* 0x00 */ U8 IOCUseOnly02; /* 0x02 */ U8 Function; /* 0x03 */ U16 IOCUseOnly04; /* 0x04 */ U8 IOCUseOnly06; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U16 ChangeCount; /* 0x08 */ U8 Action; /* 0x0A */ U8 Reserved0B; /* 0x0B */ U32 StartingSequenceNumber; /* 0x0C */ U16 Locale; /* 0x10 */ U8 Class; /* 0x12 */ U8 Reserved13; /* 0x13 */ U32 Reserved14[3]; /* 0x14 */ MPI3_SGE_UNION SGL; /* 0x20 */ } MPI3_PEL_REQ_ACTION_GET_COUNT, MPI3_POINTER PTR_MPI3_PEL_REQ_ACTION_GET_COUNT, Mpi3PELReqActionGetCount_t, MPI3_POINTER pMpi3PELReqActionGetCount_t; /**************************************************************************** * PEL ACTION Wait * ****************************************************************************/ typedef struct _MPI3_PEL_REQ_ACTION_WAIT { U16 HostTag; /* 0x00 */ U8 IOCUseOnly02; /* 0x02 */ U8 Function; /* 0x03 */ U16 IOCUseOnly04; /* 0x04 */ U8 IOCUseOnly06; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U16 ChangeCount; /* 0x08 */ U8 Action; /* 0x0A */ U8 Reserved0B; /* 0x0B */ U32 StartingSequenceNumber; /* 0x0C */ U16 Locale; /* 0x10 */ U8 Class; /* 0x12 */ U8 Reserved13; /* 0x13 */ U16 WaitTime; /* 0x14 */ U16 Reserved16; /* 0x16 */ U32 Reserved18[2]; /* 0x18 */ } MPI3_PEL_REQ_ACTION_WAIT, MPI3_POINTER PTR_MPI3_PEL_REQ_ACTION_WAIT, Mpi3PELReqActionWait_t, MPI3_POINTER pMpi3PELReqActionWait_t; /**************************************************************************** * PEL ACTION Abort * ****************************************************************************/ typedef struct _MPI3_PEL_REQ_ACTION_ABORT { U16 HostTag; /* 0x00 */ U8 IOCUseOnly02; /* 0x02 */ U8 Function; /* 0x03 */ U16 IOCUseOnly04; /* 0x04 */ U8 IOCUseOnly06; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U16 ChangeCount; /* 0x08 */ U8 Action; /* 0x0A */ U8 Reserved0B; /* 0x0B */ U32 Reserved0C; /* 0x0C */ U16 AbortHostTag; /* 0x10 */ U16 Reserved12; /* 0x12 */ U32 Reserved14; /* 0x14 */ } MPI3_PEL_REQ_ACTION_ABORT, MPI3_POINTER PTR_MPI3_PEL_REQ_ACTION_ABORT, Mpi3PELReqActionAbort_t, MPI3_POINTER pMpi3PELReqActionAbort_t; /**************************************************************************** * PEL ACTION Get Print Strings * ****************************************************************************/ typedef struct _MPI3_PEL_REQ_ACTION_GET_PRINT_STRINGS { U16 HostTag; /* 0x00 */ U8 IOCUseOnly02; /* 0x02 */ U8 Function; /* 0x03 */ U16 IOCUseOnly04; /* 0x04 */ U8 IOCUseOnly06; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U16 ChangeCount; /* 0x08 */ U8 Action; /* 0x0A */ U8 Reserved0B; /* 0x0B */ U32 Reserved0C; /* 0x0C */ U16 StartLogCode; /* 0x10 */ U16 Reserved12; /* 0x12 */ U32 Reserved14[3]; /* 0x14 */ MPI3_SGE_UNION SGL; /* 0x20 */ } MPI3_PEL_REQ_ACTION_GET_PRINT_STRINGS, MPI3_POINTER PTR_MPI3_PEL_REQ_ACTION_GET_PRINT_STRINGS, Mpi3PELReqActionGetPrintStrings_t, MPI3_POINTER pMpi3PELReqActionGetPrintStrings_t; /**************************************************************************** * PEL ACTION Acknowledge * ****************************************************************************/ typedef struct _MPI3_PEL_REQ_ACTION_ACKNOWLEDGE { U16 HostTag; /* 0x00 */ U8 IOCUseOnly02; /* 0x02 */ U8 Function; /* 0x03 */ U16 IOCUseOnly04; /* 0x04 */ U8 IOCUseOnly06; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U16 ChangeCount; /* 0x08 */ U8 Action; /* 0x0A */ U8 Reserved0B; /* 0x0B */ U32 SequenceNumber; /* 0x0C */ U32 Reserved10; /* 0x10 */ } MPI3_PEL_REQ_ACTION_ACKNOWLEDGE, MPI3_POINTER PTR_MPI3_PEL_REQ_ACTION_ACKNOWLEDGE, Mpi3PELReqActionAcknowledge_t, MPI3_POINTER pMpi3PELReqActionAcknowledge_t; /**** Definitions for the MsgFlags field ****/ #define MPI3_PELACKNOWLEDGE_MSGFLAGS_SAFE_MODE_EXIT_MASK (0x03) #define MPI3_PELACKNOWLEDGE_MSGFLAGS_SAFE_MODE_EXIT_NO_GUIDANCE (0x00) #define MPI3_PELACKNOWLEDGE_MSGFLAGS_SAFE_MODE_EXIT_CONTINUE_OP (0x01) #define MPI3_PELACKNOWLEDGE_MSGFLAGS_SAFE_MODE_EXIT_TRANSITION_TO_FAULT (0x02) /**************************************************************************** * PEL Reply * ****************************************************************************/ typedef struct _MPI3_PEL_REPLY { U16 HostTag; /* 0x00 */ U8 IOCUseOnly02; /* 0x02 */ U8 Function; /* 0x03 */ U16 IOCUseOnly04; /* 0x04 */ U8 IOCUseOnly06; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U16 IOCUseOnly08; /* 0x08 */ U16 IOCStatus; /* 0x0A */ U32 IOCLogInfo; /* 0x0C */ U8 Action; /* 0x10 */ U8 Reserved11; /* 0x11 */ U16 Reserved12; /* 0x12 */ U16 PELogStatus; /* 0x14 */ U16 Reserved16; /* 0x16 */ U32 TransferLength; /* 0x18 */ } MPI3_PEL_REPLY, MPI3_POINTER PTR_MPI3_PEL_REPLY, Mpi3PELReply_t, MPI3_POINTER pMpi3PELReply_t; /***************************************************************************** * Component Image Download * ****************************************************************************/ typedef struct _MPI3_CI_DOWNLOAD_REQUEST { U16 HostTag; /* 0x00 */ U8 IOCUseOnly02; /* 0x02 */ U8 Function; /* 0x03 */ U16 IOCUseOnly04; /* 0x04 */ U8 IOCUseOnly06; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U16 ChangeCount; /* 0x08 */ U8 Action; /* 0x0A */ U8 Reserved0B; /* 0x0B */ U32 Signature1; /* 0x0C */ U32 TotalImageSize; /* 0x10 */ U32 ImageOffset; /* 0x14 */ U32 SegmentSize; /* 0x18 */ U32 Reserved1C; /* 0x1C */ MPI3_SGE_UNION SGL; /* 0x20 */ } MPI3_CI_DOWNLOAD_REQUEST, MPI3_POINTER PTR_MPI3_CI_DOWNLOAD_REQUEST, Mpi3CIDownloadRequest_t, MPI3_POINTER pMpi3CIDownloadRequest_t; /**** Definitions for the MsgFlags field ****/ #define MPI3_CI_DOWNLOAD_MSGFLAGS_LAST_SEGMENT (0x80) #define MPI3_CI_DOWNLOAD_MSGFLAGS_FORCE_FMC_ENABLE (0x40) #define MPI3_CI_DOWNLOAD_MSGFLAGS_SIGNED_NVDATA (0x20) #define MPI3_CI_DOWNLOAD_MSGFLAGS_WRITE_CACHE_FLUSH_MASK (0x03) #define MPI3_CI_DOWNLOAD_MSGFLAGS_WRITE_CACHE_FLUSH_FAST (0x00) #define MPI3_CI_DOWNLOAD_MSGFLAGS_WRITE_CACHE_FLUSH_MEDIUM (0x01) #define MPI3_CI_DOWNLOAD_MSGFLAGS_WRITE_CACHE_FLUSH_SLOW (0x02) /**** Definitions for the Action field ****/ #define MPI3_CI_DOWNLOAD_ACTION_DOWNLOAD (0x01) #define MPI3_CI_DOWNLOAD_ACTION_ONLINE_ACTIVATION (0x02) #define MPI3_CI_DOWNLOAD_ACTION_OFFLINE_ACTIVATION (0x03) #define MPI3_CI_DOWNLOAD_ACTION_GET_STATUS (0x04) #define MPI3_CI_DOWNLOAD_ACTION_CANCEL_OFFLINE_ACTIVATION (0x05) typedef struct _MPI3_CI_DOWNLOAD_REPLY { U16 HostTag; /* 0x00 */ U8 IOCUseOnly02; /* 0x02 */ U8 Function; /* 0x03 */ U16 IOCUseOnly04; /* 0x04 */ U8 IOCUseOnly06; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U16 IOCUseOnly08; /* 0x08 */ U16 IOCStatus; /* 0x0A */ U32 IOCLogInfo; /* 0x0C */ U8 Flags; /* 0x10 */ U8 CacheDirty; /* 0x11 */ U8 PendingCount; /* 0x12 */ U8 Reserved13; /* 0x13 */ } MPI3_CI_DOWNLOAD_REPLY, MPI3_POINTER PTR_MPI3_CI_DOWNLOAD_REPLY, Mpi3CIDownloadReply_t, MPI3_POINTER pMpi3CIDownloadReply_t; /**** Definitions for the Flags field ****/ #define MPI3_CI_DOWNLOAD_FLAGS_DOWNLOAD_IN_PROGRESS (0x80) #define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_FAILURE (0x40) #define MPI3_CI_DOWNLOAD_FLAGS_OFFLINE_ACTIVATION_REQUIRED (0x20) #define MPI3_CI_DOWNLOAD_FLAGS_KEY_UPDATE_PENDING (0x10) #define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_MASK (0x0E) #define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_NOT_NEEDED (0x00) #define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_AWAITING (0x02) #define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_ONLINE_PENDING (0x04) #define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_OFFLINE_PENDING (0x06) #define MPI3_CI_DOWNLOAD_FLAGS_COMPATIBLE (0x01) /***************************************************************************** * Component Image Upload * ****************************************************************************/ typedef struct _MPI3_CI_UPLOAD_REQUEST { U16 HostTag; /* 0x00 */ U8 IOCUseOnly02; /* 0x02 */ U8 Function; /* 0x03 */ U16 IOCUseOnly04; /* 0x04 */ U8 IOCUseOnly06; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U16 ChangeCount; /* 0x08 */ U16 Reserved0A; /* 0x0A */ U32 Signature1; /* 0x0C */ U32 Reserved10; /* 0x10 */ U32 ImageOffset; /* 0x14 */ U32 SegmentSize; /* 0x18 */ U32 Reserved1C; /* 0x1C */ MPI3_SGE_UNION SGL; /* 0x20 */ } MPI3_CI_UPLOAD_REQUEST, MPI3_POINTER PTR_MPI3_CI_UPLOAD_REQUEST, Mpi3CIUploadRequest_t, MPI3_POINTER pMpi3CIUploadRequest_t; /**** Defines for the MsgFlags field ****/ #define MPI3_CI_UPLOAD_MSGFLAGS_LOCATION_MASK (0x01) #define MPI3_CI_UPLOAD_MSGFLAGS_LOCATION_PRIMARY (0x00) #define MPI3_CI_UPLOAD_MSGFLAGS_LOCATION_SECONDARY (0x01) #define MPI3_CI_UPLOAD_MSGFLAGS_FORMAT_MASK (0x02) #define MPI3_CI_UPLOAD_MSGFLAGS_FORMAT_FLASH (0x00) #define MPI3_CI_UPLOAD_MSGFLAGS_FORMAT_EXECUTABLE (0x02) /**** Defines for Signature1 field - use MPI3_IMAGE_HEADER_SIGNATURE1_ defines */ /***************************************************************************** * IO Unit Control * ****************************************************************************/ /**** Definitions for the Operation field ****/ #define MPI3_CTRL_OP_FORCE_FULL_DISCOVERY (0x01) #define MPI3_CTRL_OP_LOOKUP_MAPPING (0x02) #define MPI3_CTRL_OP_UPDATE_TIMESTAMP (0x04) #define MPI3_CTRL_OP_GET_TIMESTAMP (0x05) #define MPI3_CTRL_OP_GET_IOC_CHANGE_COUNT (0x06) #define MPI3_CTRL_OP_CHANGE_PROFILE (0x07) #define MPI3_CTRL_OP_REMOVE_DEVICE (0x10) #define MPI3_CTRL_OP_CLOSE_PERSISTENT_CONNECTION (0x11) #define MPI3_CTRL_OP_HIDDEN_ACK (0x12) #define MPI3_CTRL_OP_CLEAR_DEVICE_COUNTERS (0x13) #define MPI3_CTRL_OP_SEND_SAS_PRIMITIVE (0x20) #define MPI3_CTRL_OP_SAS_PHY_CONTROL (0x21) #define MPI3_CTRL_OP_READ_INTERNAL_BUS (0x23) #define MPI3_CTRL_OP_WRITE_INTERNAL_BUS (0x24) #define MPI3_CTRL_OP_PCIE_LINK_CONTROL (0x30) /**** Depending on the Operation selected, the various ParamX fields *****/ /**** contain defined data values. These indexes help identify those values *****/ #define MPI3_CTRL_OP_LOOKUP_MAPPING_PARAM8_LOOKUP_METHOD_INDEX (0x00) #define MPI3_CTRL_OP_UPDATE_TIMESTAMP_PARAM64_TIMESTAMP_INDEX (0x00) #define MPI3_CTRL_OP_CHANGE_PROFILE_PARAM8_PROFILE_ID_INDEX (0x00) #define MPI3_CTRL_OP_REMOVE_DEVICE_PARAM16_DEVHANDLE_INDEX (0x00) #define MPI3_CTRL_OP_CLOSE_PERSIST_CONN_PARAM16_DEVHANDLE_INDEX (0x00) #define MPI3_CTRL_OP_HIDDEN_ACK_PARAM16_DEVHANDLE_INDEX (0x00) #define MPI3_CTRL_OP_CLEAR_DEVICE_COUNTERS_PARAM16_DEVHANDLE_INDEX (0x00) #define MPI3_CTRL_OP_SEND_SAS_PRIM_PARAM8_PHY_INDEX (0x00) #define MPI3_CTRL_OP_SEND_SAS_PRIM_PARAM8_PRIMSEQ_INDEX (0x01) #define MPI3_CTRL_OP_SEND_SAS_PRIM_PARAM32_PRIMITIVE_INDEX (0x00) #define MPI3_CTRL_OP_SAS_PHY_CONTROL_PARAM8_ACTION_INDEX (0x00) #define MPI3_CTRL_OP_SAS_PHY_CONTROL_PARAM8_PHY_INDEX (0x01) #define MPI3_CTRL_OP_READ_INTERNAL_BUS_PARAM64_ADDRESS_INDEX (0x00) #define MPI3_CTRL_OP_WRITE_INTERNAL_BUS_PARAM64_ADDRESS_INDEX (0x00) #define MPI3_CTRL_OP_WRITE_INTERNAL_BUS_PARAM32_VALUE_INDEX (0x00) #define MPI3_CTRL_OP_PCIE_LINK_CONTROL_PARAM8_ACTION_INDEX (0x00) #define MPI3_CTRL_OP_PCIE_LINK_CONTROL_PARAM8_LINK_INDEX (0x01) /**** Definitions for the LookupMethod field in LOOKUP_MAPPING reqs ****/ #define MPI3_CTRL_LOOKUP_METHOD_WWID_ADDRESS (0x01) #define MPI3_CTRL_LOOKUP_METHOD_ENCLOSURE_SLOT (0x02) #define MPI3_CTRL_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03) #define MPI3_CTRL_LOOKUP_METHOD_PERSISTENT_ID (0x04) /**** Definitions for IoUnitControl Lookup Mapping Method Parameters ****/ #define MPI3_CTRL_LOOKUP_METHOD_WWIDADDR_PARAM16_DEVH_INDEX (0) #define MPI3_CTRL_LOOKUP_METHOD_WWIDADDR_PARAM64_WWID_INDEX (0) #define MPI3_CTRL_LOOKUP_METHOD_ENCLSLOT_PARAM16_SLOTNUM_INDEX (0) #define MPI3_CTRL_LOOKUP_METHOD_ENCLSLOT_PARAM64_ENCLOSURELID_INDEX (0) #define MPI3_CTRL_LOOKUP_METHOD_SASDEVNAME_PARAM16_DEVH_INDEX (0) #define MPI3_CTRL_LOOKUP_METHOD_SASDEVNAME_PARAM64_DEVNAME_INDEX (0) #define MPI3_CTRL_LOOKUP_METHOD_PERSISTID_PARAM16_DEVH_INDEX (0) #define MPI3_CTRL_LOOKUP_METHOD_PERSISTID_PARAM16_PERSISTENT_ID_INDEX (1) /*** Definitions for IoUnitControl Reply fields ****/ #define MPI3_CTRL_LOOKUP_METHOD_VALUE16_DEVH_INDEX (0) #define MPI3_CTRL_GET_TIMESTAMP_VALUE64_TIMESTAMP_INDEX (0) #define MPI3_CTRL_GET_IOC_CHANGE_COUNT_VALUE16_CHANGECOUNT_INDEX (0) #define MPI3_CTRL_READ_INTERNAL_BUS_VALUE32_VALUE_INDEX (0) /**** Definitions for the PrimSeq field in SEND_SAS_PRIMITIVE reqs ****/ #define MPI3_CTRL_PRIMFLAGS_SINGLE (0x01) #define MPI3_CTRL_PRIMFLAGS_TRIPLE (0x03) #define MPI3_CTRL_PRIMFLAGS_REDUNDANT (0x06) /**** Definitions for the Action field in PCIE_LINK_CONTROL and SAS_PHY_CONTROL reqs ****/ #define MPI3_CTRL_ACTION_NOP (0x00) #define MPI3_CTRL_ACTION_LINK_RESET (0x01) #define MPI3_CTRL_ACTION_HARD_RESET (0x02) #define MPI3_CTRL_ACTION_CLEAR_ERROR_LOG (0x05) typedef struct _MPI3_IOUNIT_CONTROL_REQUEST { U16 HostTag; /* 0x00 */ U8 IOCUseOnly02; /* 0x02 */ U8 Function; /* 0x03 */ U16 IOCUseOnly04; /* 0x04 */ U8 IOCUseOnly06; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U16 ChangeCount; /* 0x08 */ U8 Reserved0A; /* 0x0A */ U8 Operation; /* 0x0B */ U32 Reserved0C; /* 0x0C */ U64 Param64[2]; /* 0x10 */ U32 Param32[4]; /* 0x20 */ U16 Param16[4]; /* 0x30 */ U8 Param8[8]; /* 0x38 */ } MPI3_IOUNIT_CONTROL_REQUEST, MPI3_POINTER PTR_MPI3_IOUNIT_CONTROL_REQUEST, Mpi3IoUnitControlRequest_t, MPI3_POINTER pMpi3IoUnitControlRequest_t; typedef struct _MPI3_IOUNIT_CONTROL_REPLY { U16 HostTag; /* 0x00 */ U8 IOCUseOnly02; /* 0x02 */ U8 Function; /* 0x03 */ U16 IOCUseOnly04; /* 0x04 */ U8 IOCUseOnly06; /* 0x06 */ U8 MsgFlags; /* 0x07 */ U16 IOCUseOnly08; /* 0x08 */ U16 IOCStatus; /* 0x0A */ U32 IOCLogInfo; /* 0x0C */ U64 Value64[2]; /* 0x10 */ U32 Value32[4]; /* 0x20 */ U16 Value16[4]; /* 0x30 */ U8 Value8[8]; /* 0x38 */ } MPI3_IOUNIT_CONTROL_REPLY, MPI3_POINTER PTR_MPI3_IOUNIT_CONTROL_REPLY, Mpi3IoUnitControlReply_t, MPI3_POINTER pMpi3IoUnitControlReply_t; #endif /* MPI30_IOC_H */