/*- * SPDX-License-Identifier: BSD-2-Clause OR GPL-2.0 * * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. * * GPL LICENSE SUMMARY * * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. * The full GNU General Public License is included in this distribution * in the file called LICENSE.GPL. * * BSD LICENSE * * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include /** * @file * * @brief This file contains the implementation of the SCIF_SAS_REMOTE_DEVICE * object. */ #include #include #include #include #include #include #include #include #include #include //****************************************************************************** //* P U B L I C M E T H O D S //****************************************************************************** U32 scif_remote_device_get_object_size( void ) { return ( sizeof(SCIF_SAS_REMOTE_DEVICE_T) + scic_remote_device_get_object_size() ); } // --------------------------------------------------------------------------- void scif_remote_device_construct( SCI_DOMAIN_HANDLE_T domain, void * remote_device_memory, SCI_REMOTE_DEVICE_HANDLE_T * new_scif_remote_device_handle ) { SCIF_SAS_DOMAIN_T * fw_domain = (SCIF_SAS_DOMAIN_T *) domain; SCIF_SAS_REMOTE_DEVICE_T * fw_device = (SCIF_SAS_REMOTE_DEVICE_T *) remote_device_memory; SCIF_LOG_TRACE(( sci_base_object_get_logger(fw_domain), SCIF_LOG_OBJECT_REMOTE_DEVICE, "scif_remote_device_construct(0x%x, 0x%x, 0x%x) enter\n", domain, remote_device_memory, new_scif_remote_device_handle )); memset(remote_device_memory, 0, sizeof(SCIF_SAS_REMOTE_DEVICE_T)); // The user's handle to the remote device evaluates to the memory // address where the remote device object is stored. *new_scif_remote_device_handle = remote_device_memory; fw_device->domain = fw_domain; fw_device->destruct_when_stopped = FALSE; //fw_device->parent.is_failed = FALSE; fw_device->operation_status = SCI_SUCCESS; fw_device->request_count = 0; fw_device->task_request_count = 0; fw_device->is_currently_discovered = TRUE; fw_device->containing_device = NULL; fw_device->device_port_width = 1; fw_device->expander_phy_identifier = 0; fw_device->destination_state = SCIF_SAS_REMOTE_DEVICE_DESTINATION_STATE_UNSPECIFIED; fw_device->ea_target_reset_request_scheduled = NULL; // Construct the base object first in order to ensure logging can // function. sci_base_remote_device_construct( &fw_device->parent, sci_base_object_get_logger(fw_domain), scif_sas_remote_device_state_table ); sci_base_state_machine_construct( &fw_device->starting_substate_machine, &fw_device->parent.parent, scif_sas_remote_device_starting_substate_table, SCIF_SAS_REMOTE_DEVICE_STARTING_SUBSTATE_AWAIT_COMPLETE ); sci_base_state_machine_construct( &fw_device->ready_substate_machine, &fw_device->parent.parent, scif_sas_remote_device_ready_substate_table, SCIF_SAS_REMOTE_DEVICE_READY_SUBSTATE_OPERATIONAL ); scif_sas_remote_device_initialize_state_logging(fw_device); scic_remote_device_construct( fw_domain->core_object, ((U8*) remote_device_memory) + sizeof(SCIF_SAS_REMOTE_DEVICE_T), &fw_device->core_object ); // Set the association in the core object, so that we are able to // determine our framework remote device object from the core remote // device. sci_object_set_association(fw_device->core_object, fw_device); } // --------------------------------------------------------------------------- SCI_STATUS scif_remote_device_da_construct( SCI_REMOTE_DEVICE_HANDLE_T remote_device, SCI_SAS_ADDRESS_T * sas_address, SCI_SAS_IDENTIFY_ADDRESS_FRAME_PROTOCOLS_T * protocols ) { SCI_STATUS status = SCI_SUCCESS; SCIF_SAS_REMOTE_DEVICE_T * fw_device = (SCIF_SAS_REMOTE_DEVICE_T *) remote_device; SCIF_LOG_TRACE(( sci_base_object_get_logger(fw_device), SCIF_LOG_OBJECT_REMOTE_DEVICE, "scif_remote_device_da_construct(0x%x, 0x%x, 0x%x) enter\n", remote_device, sas_address, protocols )); // Make sure the device hasn't already been constructed and added // to the domain. if (scif_domain_get_device_by_sas_address(fw_device->domain, sas_address) == SCI_INVALID_HANDLE) { SCIC_PORT_PROPERTIES_T properties; scic_port_get_properties(fw_device->domain->core_object, &properties); // Check to see if this is the direct attached device. if ( (sas_address->low == properties.remote.sas_address.low) && (sas_address->high == properties.remote.sas_address.high) ) { //Get accurate port width from port's phy mask for a DA device. SCI_GET_BITS_SET_COUNT(properties.phy_mask, fw_device->device_port_width); status = scic_remote_device_da_construct(fw_device->core_object); } else // Don't allow the user to construct a direct attached device // if it's not a direct attached device. status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; } else status = SCI_FAILURE_DEVICE_EXISTS; if (status == SCI_SUCCESS) { // Add the device to the domain list. sci_abstract_list_pushback( &fw_device->domain->remote_device_list, fw_device ); // If a SATA/STP device is connected, then construct it. if (protocols->u.bits.stp_target) scif_sas_stp_remote_device_construct(fw_device); else if (protocols->u.bits.smp_target) scif_sas_smp_remote_device_construct(fw_device); SCIF_LOG_INFO(( sci_base_object_get_logger(fw_device), SCIF_LOG_OBJECT_REMOTE_DEVICE | SCIF_LOG_OBJECT_DOMAIN_DISCOVERY, "Domain:0x%x SasAddress:0x%x,0x%x remote device constructed\n", fw_device->domain, sas_address->low, sas_address->high )); status = fw_device->state_handlers->parent.start_handler( &fw_device->parent ); } else { SCIF_LOG_WARNING(( sci_base_object_get_logger(fw_device), SCIF_LOG_OBJECT_REMOTE_DEVICE | SCIF_LOG_OBJECT_DOMAIN_DISCOVERY, "Domain:0x%x SasAddress:0x%x,0x%x Status:0x%x remote device construct failure\n", fw_device->domain, sas_address->low, sas_address->high, status )); } return status; } // --------------------------------------------------------------------------- SCI_STATUS scif_remote_device_ea_construct( SCI_REMOTE_DEVICE_HANDLE_T remote_device, SCI_REMOTE_DEVICE_HANDLE_T containing_device, SMP_RESPONSE_DISCOVER_T * smp_response ) { SCI_SAS_ADDRESS_T * sas_address; SCI_STATUS status = SCI_SUCCESS; SCIF_SAS_REMOTE_DEVICE_T * fw_device = (SCIF_SAS_REMOTE_DEVICE_T *) remote_device; SCIF_SAS_REMOTE_DEVICE_T * fw_smp_device = (SCIF_SAS_REMOTE_DEVICE_T *) containing_device; fw_device->containing_device = fw_smp_device; fw_device->expander_phy_identifier = fw_smp_device->protocol_device.smp_device.current_activity_phy_index; sas_address = &smp_response->attached_sas_address; SCIF_LOG_TRACE(( sci_base_object_get_logger(fw_device), SCIF_LOG_OBJECT_REMOTE_DEVICE, "scif_remote_device_ea_construct(0x%x, 0x%x) enter\n", remote_device, smp_response )); // Make sure the device hasn't already been constructed and added // to the domain. if (scif_domain_get_device_by_sas_address(fw_device->domain, sas_address) == SCI_INVALID_HANDLE) { //for sata device, we need another routine. likely //scif_remote_device_ea_sata_construct. status = scic_remote_device_ea_construct(fw_device->core_object, smp_response); } else status = SCI_FAILURE_DEVICE_EXISTS; if (status == SCI_SUCCESS) { // Add the device to the domain list. sci_abstract_list_pushback( &fw_device->domain->remote_device_list, fw_device ); if (smp_response->protocols.u.bits.attached_smp_target) scif_sas_smp_remote_device_construct(fw_device); else if (smp_response->protocols.u.bits.attached_stp_target) scif_sas_stp_remote_device_construct(fw_device); SCIF_LOG_INFO(( sci_base_object_get_logger(fw_device), SCIF_LOG_OBJECT_REMOTE_DEVICE | SCIF_LOG_OBJECT_DOMAIN_DISCOVERY, "Domain:0x%x SasAddress:0x%x,0x%x remote device constructed\n", fw_device->domain, sas_address->low, sas_address->high )); //only start the device if the device is not a SATA disk on SPINUP_HOLD state. if ( scic_remote_device_get_connection_rate(fw_device->core_object) != SCI_SATA_SPINUP_HOLD ) { status = fw_device->state_handlers->parent.start_handler( &fw_device->parent ); } } else { SCIF_LOG_WARNING(( sci_base_object_get_logger(fw_device), SCIF_LOG_OBJECT_REMOTE_DEVICE | SCIF_LOG_OBJECT_DOMAIN_DISCOVERY, "Domain:0x%x SasAddress:0x%x,0x%x Status:0x%x remote device construct failure\n", fw_device->domain, sas_address->low, sas_address->high, status )); } return status; } // --------------------------------------------------------------------------- SCI_STATUS scif_remote_device_destruct( SCI_REMOTE_DEVICE_HANDLE_T remote_device ) { SCIF_SAS_REMOTE_DEVICE_T * fw_device = (SCIF_SAS_REMOTE_DEVICE_T*) remote_device; SCIF_LOG_TRACE(( sci_base_object_get_logger(fw_device), SCIF_LOG_OBJECT_REMOTE_DEVICE, "scif_remote_device_destruct(0x%x) enter\n", remote_device )); //remove the device from domain's remote_device_list fw_device->domain->state_handlers->device_destruct_handler( &fw_device->domain->parent, &fw_device->parent ); // The destruct process may not complete immediately, since the core // remote device likely needs to be stopped first. However, the user // is not given a callback notification for destruction. return fw_device->state_handlers->parent.destruct_handler( &fw_device->parent ); } // --------------------------------------------------------------------------- SCI_REMOTE_DEVICE_HANDLE_T scif_remote_device_get_scic_handle( SCI_REMOTE_DEVICE_HANDLE_T scif_remote_device ) { SCIF_SAS_REMOTE_DEVICE_T * fw_device = (SCIF_SAS_REMOTE_DEVICE_T*) scif_remote_device; if ( (fw_device == NULL) || (fw_device->core_object == SCI_INVALID_HANDLE) ) return SCI_INVALID_HANDLE; SCIF_LOG_WARNING(( sci_base_object_get_logger(fw_device), SCIF_LOG_OBJECT_REMOTE_DEVICE, "RemoteDevice:0x%x no associated core device found\n", fw_device )); return fw_device->core_object; } // --------------------------------------------------------------------------- void scic_cb_remote_device_start_complete( SCI_CONTROLLER_HANDLE_T controller, SCI_REMOTE_DEVICE_HANDLE_T remote_device, SCI_STATUS completion_status ) { SCIF_SAS_REMOTE_DEVICE_T * fw_device = (SCIF_SAS_REMOTE_DEVICE_T*) sci_object_get_association(remote_device); SCIF_LOG_TRACE(( sci_base_object_get_logger(fw_device), SCIF_LOG_OBJECT_REMOTE_DEVICE | SCIF_LOG_OBJECT_REMOTE_DEVICE_CONFIG, "scic_cb_remote_device_start_complete(0x%x, 0x%x, 0x%x) enter\n", controller, remote_device, completion_status )); fw_device->state_handlers->start_complete_handler( fw_device, completion_status ); } // --------------------------------------------------------------------------- void scic_cb_remote_device_stop_complete( SCI_CONTROLLER_HANDLE_T controller, SCI_REMOTE_DEVICE_HANDLE_T remote_device, SCI_STATUS completion_status ) { SCIF_SAS_REMOTE_DEVICE_T * fw_device = (SCIF_SAS_REMOTE_DEVICE_T*) sci_object_get_association(remote_device); SCIF_LOG_TRACE(( sci_base_object_get_logger(fw_device), SCIF_LOG_OBJECT_REMOTE_DEVICE | SCIF_LOG_OBJECT_REMOTE_DEVICE_CONFIG, "scic_cb_remote_device_stop_complete(0x%x, 0x%x, 0x%x) enter\n", controller, remote_device, completion_status )); fw_device->state_handlers->stop_complete_handler( fw_device, completion_status ); } // --------------------------------------------------------------------------- void scic_cb_remote_device_ready( SCI_CONTROLLER_HANDLE_T controller, SCI_REMOTE_DEVICE_HANDLE_T remote_device ) { SCIF_SAS_REMOTE_DEVICE_T * fw_device = (SCIF_SAS_REMOTE_DEVICE_T*) sci_object_get_association(remote_device); fw_device->state_handlers->ready_handler(fw_device); } // --------------------------------------------------------------------------- void scic_cb_remote_device_not_ready( SCI_CONTROLLER_HANDLE_T controller, SCI_REMOTE_DEVICE_HANDLE_T remote_device, U32 reason_code ) { SCIF_SAS_REMOTE_DEVICE_T * fw_device = (SCIF_SAS_REMOTE_DEVICE_T*) sci_object_get_association(remote_device); fw_device->state_handlers->not_ready_handler(fw_device,reason_code); } // --------------------------------------------------------------------------- U16 scif_remote_device_get_max_queue_depth( SCI_REMOTE_DEVICE_HANDLE_T remote_device ) { SCIF_SAS_REMOTE_DEVICE_T * fw_device = (SCIF_SAS_REMOTE_DEVICE_T*) remote_device; SMP_DISCOVER_RESPONSE_PROTOCOLS_T protocols; scic_remote_device_get_protocols(fw_device->core_object, &protocols); // If the target is a SATA/STP target, then determine the queue depth // for either NCQ or for UDMA. if (protocols.u.bits.attached_stp_target) { if (fw_device->protocol_device.stp_device.sati_device.capabilities & SATI_DEVICE_CAP_NCQ_SUPPORTED_ENABLE) { return fw_device->protocol_device.stp_device.sati_device.ncq_depth; } else { // At the moment, we only allow a single UDMA request to be queued. return 1; } } // For SSP devices return a no maximum queue depth supported. return SCIF_REMOTE_DEVICE_NO_MAX_QUEUE_DEPTH; } // --------------------------------------------------------------------------- SCI_STATUS scif_remote_device_get_containing_device( SCI_REMOTE_DEVICE_HANDLE_T remote_device, SCI_REMOTE_DEVICE_HANDLE_T * containing_device ) { SCI_STATUS status = SCI_FAILURE; SCIF_SAS_REMOTE_DEVICE_T * this_device = (SCIF_SAS_REMOTE_DEVICE_T *) remote_device; if ( (this_device != NULL) && (containing_device != NULL) ) { *containing_device = (SCI_REMOTE_DEVICE_HANDLE_T)(this_device->containing_device); if (*containing_device != NULL) { status = SCI_SUCCESS; } } return status; } // --------------------------------------------------------------------------- U32 scif_remote_device_get_started_io_count( SCI_REMOTE_DEVICE_HANDLE_T remote_device ) { SCIF_SAS_REMOTE_DEVICE_T * this_device = (SCIF_SAS_REMOTE_DEVICE_T *) remote_device; return this_device->request_count - this_device->task_request_count; } //****************************************************************************** //* P R O T E C T E D M E T H O D S //****************************************************************************** /* void scif_sas_remote_device_failure( SCIF_SAS_REMOTE_DEVICE_T * fw_device ) { fw_device->parent.is_failed = TRUE; sci_base_state_machine_change_state( &fw_device->parent.state_machine, SCI_BASE_REMOTE_DEVICE_STATE_STOPPING ); } */ /** * @brief This method retrieves info from Report Phy Sata response and * save the additional data for a SATA remote device, if necessary. * * @param[in] report_phy_sata_response SMP Report Phy Sata response * * @return none */ void scif_sas_remote_device_save_report_phy_sata_information( SMP_RESPONSE_REPORT_PHY_SATA_T * report_phy_sata_response ) { //do nothing currently. Later, if needed, we will search the existed //remote device by stp_sas_address, then save more information for //that device off the report_phy_sata_response. This assumes the //stp_sas_address from report_phy_sata response is the same sas address //from discover response. return; } /** * @brief This method does target reset for DA or EA remote device. * * @param[in] fw_controller, the controller object the target device belongs * to. * @param[in] fw_device, the target device to be hard reset. * @param[in] fw_request, the scif task request object that asked for this * target reset. */ void scif_sas_remote_device_target_reset( SCIF_SAS_REMOTE_DEVICE_T * fw_device, SCIF_SAS_REQUEST_T * fw_request ) { SCIF_LOG_INFO(( sci_base_object_get_logger(fw_device), SCIF_LOG_OBJECT_REMOTE_DEVICE, "scif_sas_remote_device_target_reset! fw_device:0x%x fw_request:0x%x\n", fw_device, fw_request )); if (fw_device->containing_device == NULL) { SCI_PORT_HANDLE_T port; port = scif_domain_get_scic_port_handle(fw_device->domain); //Direct attached device target reset. //calling core to do port reset. The fw_request will not be used here. scic_port_hard_reset( port, scic_remote_device_get_suggested_reset_timeout(fw_device->core_object) ); } else { //Expander attached device target reset. if ( fw_device->containing_device->protocol_device.smp_device.current_activity == SCIF_SAS_SMP_REMOTE_DEVICE_ACTIVITY_TARGET_RESET ) { //The containing expander is in the middle of target resetting other of its //remote disks. Flag this remote device to be target reset later. SCIF_LOG_INFO(( sci_base_object_get_logger(fw_device), SCIF_LOG_OBJECT_REMOTE_DEVICE, "scif_sas_remote_device_target_reset DELAYED! fw_device:0x%x fw_request:0x%x\n", fw_device, fw_request )); fw_device->ea_target_reset_request_scheduled = fw_request; return; } //set current_activity and current_smp_request to expander device. scif_sas_smp_remote_device_start_target_reset( fw_device->containing_device, fw_device, fw_request); } scic_remote_device_reset(fw_device->core_object); } /** * @brief This method completes target reset for DA or EA remote device. * * @param[in] fw_device, the target device to be hard reset. * @param[in] fw_request, the scif task request object that asked for this * target reset. * @param[in] completion_status */ void scif_sas_remote_device_target_reset_complete( SCIF_SAS_REMOTE_DEVICE_T * fw_device, SCIF_SAS_REQUEST_T * fw_request, SCI_STATUS completion_status ) { SCIF_LOG_INFO(( sci_base_object_get_logger(fw_device), SCIF_LOG_OBJECT_REMOTE_DEVICE, "scif_sas_remote_device_target_reset_complete! " "fw_device:0x%x fw_request:0x%x completion_status 0x%x\n", fw_device, fw_request, completion_status )); scif_cb_task_request_complete( fw_device->domain->controller, fw_device, fw_request, (SCI_TASK_STATUS) completion_status ); scic_remote_device_reset_complete(fw_device->core_object); //For expander attached device done target reset. if (fw_device->containing_device != NULL) { //search for all the devices in the domain to find other remote devices //needs to be target reset. SCIF_SAS_REMOTE_DEVICE_T * next_device; scif_sas_smp_remote_device_clear(fw_device->containing_device); if( (next_device = scif_sas_domain_find_next_ea_target_reset(fw_device->domain)) != NULL ) { scif_sas_smp_remote_device_start_target_reset( next_device->containing_device, next_device, next_device->ea_target_reset_request_scheduled ); next_device->ea_target_reset_request_scheduled = NULL; } else { //if the domain is in the DISCOVER state, we should resume the DISCOVER. if (fw_device->domain->parent.state_machine.current_state_id == SCI_BASE_DOMAIN_STATE_DISCOVERING) { SCIF_SAS_REMOTE_DEVICE_T * top_expander = fw_device->containing_device; while(top_expander->containing_device != NULL) top_expander = top_expander->containing_device; scif_sas_domain_start_smp_discover(fw_device->domain, top_expander); } else { //Tell driver to kick off Discover process. If the domain is already //in Discovery state, this discovery request will not be carried on. scif_cb_domain_change_notification( fw_device->domain->controller, fw_device->domain ); } } } else { //Tell driver to kick off Discover process. If the domain is already //in Discovery state, this discovery request will not be carried on. scif_cb_domain_change_notification( fw_device->domain->controller, fw_device->domain ); } } #if !defined(DISABLE_WIDE_PORTED_TARGETS) SCI_STATUS scif_sas_remote_device_update_port_width( SCIF_SAS_REMOTE_DEVICE_T * fw_device, U8 new_port_width ) { SCIF_LOG_INFO(( sci_base_object_get_logger(fw_device), SCIF_LOG_OBJECT_REMOTE_DEVICE, "scif_sas_remote_device_update_port_width (0x%x, 0x%x) enter\n", fw_device, new_port_width )); fw_device->device_port_width = new_port_width; //Don't Start a new update of port width if a device is already in //UPDATING PORT WIDTH state. if (fw_device->parent.state_machine.current_state_id == SCI_BASE_REMOTE_DEVICE_STATE_READY) { if (fw_device->device_port_width != 0) { //Change state to UPDATING_PORT_WIDTH sci_base_state_machine_change_state( &fw_device->parent.state_machine, SCI_BASE_REMOTE_DEVICE_STATE_UPDATING_PORT_WIDTH ); } return SCI_SUCCESS; } else if (fw_device->parent.state_machine.current_state_id == SCI_BASE_REMOTE_DEVICE_STATE_STARTING) { fw_device->destination_state = SCIF_SAS_REMOTE_DEVICE_DESTINATION_STATE_UPDATING_PORT_WIDTH; } return SCI_FAILURE_INVALID_STATE; } #endif //#if !defined(DISABLE_WIDE_PORTED_TARGETS) #ifdef SCI_LOGGING void scif_sas_remote_device_initialize_state_logging( SCIF_SAS_REMOTE_DEVICE_T * remote_device ) { sci_base_state_machine_logger_initialize( &remote_device->parent.state_machine_logger, &remote_device->parent.state_machine, &remote_device->parent.parent, scif_cb_logger_log_states, "SCIF_SAS_REMOTE_DEVICE_T", "base_state_machine", SCIF_LOG_OBJECT_REMOTE_DEVICE ); sci_base_state_machine_logger_initialize( &remote_device->starting_substate_machine_logger, &remote_device->starting_substate_machine, &remote_device->parent.parent, scif_cb_logger_log_states, "SCIF_SAS_REMOTE_DEVICE_T", "starting substate machine", SCIF_LOG_OBJECT_REMOTE_DEVICE ); sci_base_state_machine_logger_initialize( &remote_device->ready_substate_machine_logger, &remote_device->ready_substate_machine, &remote_device->parent.parent, scif_cb_logger_log_states, "SCIF_SAS_REMOTE_DEVICE_T", "ready substate machine", SCIF_LOG_OBJECT_REMOTE_DEVICE ); } void scif_sas_remote_device_deinitialize_state_logging( SCIF_SAS_REMOTE_DEVICE_T * remote_device ) { sci_base_state_machine_logger_deinitialize( &remote_device->parent.state_machine_logger, &remote_device->parent.state_machine ); sci_base_state_machine_logger_deinitialize( &remote_device->starting_substate_machine_logger, &remote_device->starting_substate_machine ); sci_base_state_machine_logger_deinitialize( &remote_device->ready_substate_machine_logger, &remote_device->ready_substate_machine ); } #endif // SCI_LOGGING