/*- * SPDX-License-Identifier: BSD-2-Clause OR GPL-2.0 * * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. * * GPL LICENSE SUMMARY * * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. * The full GNU General Public License is included in this distribution * in the file called LICENSE.GPL. * * BSD LICENSE * * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include /** * @file * @brief This file contains the method implementations required to * translate the SCSI write (6, 10, 12, or 16-byte) commands. */ #include #include #include #include #include #include //****************************************************************************** //* P R I V A T E M E T H O D S //****************************************************************************** /** * @brief This method performs the common translation functionality for * all SCSI write operations that are 10 bytes in size or larger. * Translated/Written items include: * - Force Unit Access (FUA) * - Sector Count/Transfer Length * - Command register * * @param[in] sector_count This parameter specifies the number of sectors * to be transferred by this request. * @param[in] device_head This parameter points to device head register * that is to be written into the ATA task file (register FIS). * * @return Indicate if the command translation succeeded. * @see sati_move_set_sector_count() for additional return values. */ static SATI_STATUS sati_write_large_translate_command( SATI_TRANSLATOR_SEQUENCE_T * sequence, void * scsi_io, void * ata_io, U32 sector_count, U8 * device_head ) { sequence->data_direction = SATI_DATA_DIRECTION_OUT; return sati_move_large_translate_command( sequence, scsi_io, ata_io, sector_count, device_head ); } /** * @brief This method performs the common translation functionality for * all SCSI write operations containing a 32-bit logical block * address. * Translated/Written items include: * - Logical Block Address (LBA) * - Force Unit Access (FUA) * - Sector Count/Transfer Length * - Command register * For more information on the parameters passed to this method, * please reference sati_translate_command(). * * @param[in] sector_count This parameter specifies the number of sectors * to be transferred by this request. * @param[in] control_byte_offset This parameter specifies the byte offset * into the command descriptor block at which the control byte * is located. * * @return Indicate if the command translation succeeded. * @see sati_move_32_bit_lba_translate_command(), sati_move_set_sector_count() * for additional return values. */ static SATI_STATUS sati_write_32_bit_lba_translate_command( SATI_TRANSLATOR_SEQUENCE_T * sequence, void * scsi_io, void * ata_io, U32 sector_count, U8 control_byte_offset ) { U8 device_head = 0; SATI_STATUS status; status = sati_write_large_translate_command( sequence, scsi_io, ata_io, sector_count, &device_head ); if (status == SATI_SUCCESS) { status = sati_move_32_bit_lba_translate_command( sequence, scsi_io, ata_io, device_head ); } return status; } //****************************************************************************** //* P U B L I C M E T H O D S //****************************************************************************** /** * @brief This method will translate the SCSI write command into a * corresponding ATA write 6 command. Depending upon the capabilities * supported by the target different ATA commands can be selected. * For more information on the parameters passed to this method, * please reference sati_translate_command(). * * @return Indicate if the command translation succeeded. * @retval SCI_SUCCESS This is returned if the command translation was * successful. * @retval SATI_FAILURE_CHECK_RESPONSE_DATA This value is returned if * sense data has been created as a result of something specified * in the CDB. */ SATI_STATUS sati_write_6_translate_command( SATI_TRANSLATOR_SEQUENCE_T * sequence, void * scsi_io, void * ata_io ) { if(sati_device_state_stopped(sequence, scsi_io)) { return SATI_FAILURE_CHECK_RESPONSE_DATA; } else { sequence->data_direction = SATI_DATA_DIRECTION_OUT; sequence->type = SATI_SEQUENCE_WRITE_6; return sati_move_small_translate_command(sequence, scsi_io, ata_io); } } /** * @brief This method will translate the SCSI write 10 command into a * corresponding ATA write command. Depending upon the capabilities * supported by the target different ATA commands can be selected. * It ensures that all translation required for this command is * performed successfully. * For more information on the parameters passed to this method, * please reference sati_translate_command(). * * @return Indicate if the command translation succeeded. * @see sati_write_32_bit_lba_translate_command() for return values. */ SATI_STATUS sati_write_10_translate_command( SATI_TRANSLATOR_SEQUENCE_T * sequence, void * scsi_io, void * ata_io ) { U8 * cdb = sati_cb_get_cdb_address(scsi_io); U32 sector_count = (sati_get_cdb_byte(cdb, 7) << 8) | (sati_get_cdb_byte(cdb, 8)); if(sati_device_state_stopped(sequence, scsi_io)) { return SATI_FAILURE_CHECK_RESPONSE_DATA; } else { sequence->type = SATI_SEQUENCE_WRITE_10; return sati_write_32_bit_lba_translate_command( sequence, scsi_io, ata_io, sector_count, 9 ); } } /** * @brief This method will translate the SCSI write 12 command into a * corresponding ATA write command. Depending upon the capabilities * supported by the target different ATA commands can be selected. * It ensures that all translation required for this command is * performed successfully. * For more information on the parameters passed to this method, * please reference sati_translate_command(). * * @return Indicate if the command translation succeeded. * @see sati_write_32_bit_lba_translate_command() for return values. */ SATI_STATUS sati_write_12_translate_command( SATI_TRANSLATOR_SEQUENCE_T * sequence, void * scsi_io, void * ata_io ) { U8 * cdb = sati_cb_get_cdb_address(scsi_io); U32 sector_count = (sati_get_cdb_byte(cdb, 6) << 24) | (sati_get_cdb_byte(cdb, 7) << 16) | (sati_get_cdb_byte(cdb, 8) << 8) | (sati_get_cdb_byte(cdb, 9)); if(sati_device_state_stopped(sequence, scsi_io)) { return SATI_FAILURE_CHECK_RESPONSE_DATA; } else { sequence->type = SATI_SEQUENCE_WRITE_12; return sati_write_32_bit_lba_translate_command( sequence, scsi_io, ata_io, sector_count, 11 ); } } /** * @brief This method will translate the SCSI write 16 command into a * corresponding ATA write command. Depending upon the capabilities * supported by the target different ATA commands can be selected. * It ensures that all translation required for this command is * performed successfully. * For more information on the parameters passed to this method, * please reference sati_translate_command(). * * @return Indicate if the command translation succeeded. * @see sati_write_large_translate_command(), sati_move_translate_64_bit_lba() * for additional return values. */ SATI_STATUS sati_write_16_translate_command( SATI_TRANSLATOR_SEQUENCE_T * sequence, void * scsi_io, void * ata_io ) { SATI_STATUS status; U8 device_head = 0; U8 * cdb = sati_cb_get_cdb_address(scsi_io); U32 sector_count = (sati_get_cdb_byte(cdb, 10) << 24) | (sati_get_cdb_byte(cdb, 11) << 16) | (sati_get_cdb_byte(cdb, 12) << 8) | (sati_get_cdb_byte(cdb, 13)); if(sati_device_state_stopped(sequence, scsi_io)) { return SATI_FAILURE_CHECK_RESPONSE_DATA; } else { sequence->type = SATI_SEQUENCE_WRITE_16; // Translate the sector count, write command register, and check various // other parts of the CDB. status = sati_write_large_translate_command( sequence, scsi_io, ata_io, sector_count, &device_head ); // Attempt to translate the 64-bit LBA field from the SCSI request // into the 48-bits of LBA in the ATA register FIS. if (status == SATI_SUCCESS) { sati_move_translate_command(sequence, scsi_io, ata_io, device_head); status = sati_move_translate_64_bit_lba(sequence, scsi_io, ata_io); } return status; } }