/*- * SPDX-License-Identifier: BSD-2-Clause OR GPL-2.0 * * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. * * GPL LICENSE SUMMARY * * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. * The full GNU General Public License is included in this distribution * in the file called LICENSE.GPL. * * BSD LICENSE * * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include /** * @file * @brief This file contains the mode page constants and data for the mode * pages supported by this translation implementation. */ // DO NOT MOVE THIS INCLUDE STATEMENT! This include must occur before // the below check for ENABLE_SATI_MODE_PAGES. #include #if defined(ENABLE_SATI_MODE_PAGES) #include #include //****************************************************************************** //* C O N S T A N T S //****************************************************************************** #define SCSI_MODE_PAGE19_SAS_ID 0x6 #define SCSI_MODE_PAGE19_SUB1_PAGE_NUM 0x1 #define SCSI_MODE_PAGE19_SUB1_PC 0x59 //****************************************************************************** //* M O D E P A G E S //****************************************************************************** U8 sat_default_mode_page_01[] = { SCSI_MODE_PAGE_READ_WRITE_ERROR, // Byte 0 - Page Code, SPF(0), PS(0) SCSI_MODE_PAGE_01_LENGTH-2, // Byte 1 - Page Length 0x80, // Byte 2 - AWRE, ARRE, TB, RC, EER, PER, DTE, DCR 0x00, // Byte 3 - Read Retry Count 0x00, // Byte 4 - Obsolete 0x00, // Byte 5 - Obsolete 0x00, // Byte 6 - Obsolete 0x00, // Byte 7 - Restricted for MMC-4 0x00, // Byte 8 - Write Retry Count 0x00, // Byte 9 - Reserved 0x00, // Byte 10 - Recovery Time Limit 0x00, // Byte 11 }; U8 sat_changeable_mode_page_01[] = { SCSI_MODE_PAGE_READ_WRITE_ERROR, SCSI_MODE_PAGE_01_LENGTH-2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, }; U8 sat_default_mode_page_02[] = { SCSI_MODE_PAGE_DISCONNECT_RECONNECT, // Byte 0 - Page Code, SPF(0), PS(0) SCSI_MODE_PAGE_02_LENGTH-2, // Byte 1 - Page Length 0x00, // Byte 2 - Buffer Full Ratio 0x00, // Byte 3 - Buffer Empty Ratio 0x00, // Byte 4 - Bus Inactivity Limit 0x00, // Byte 5 0x00, // Byte 6 - Disconnect Time Limit 0x00, // Byte 7 0x00, // Byte 8 - Connect Time Limit 0x00, // Byte 9 0x00, // Byte 10 - Maximum Burst Size 0x00, // Byte 11 0x00, // Byte 12 - EMDP, FAIR_ARB, DIMM, DTDC 0x00, // Byte 13 0x00, // Byte 14 - First Burst Size 0x00, // Byte 15 }; U8 sat_changeable_mode_page_02[] = { SCSI_MODE_PAGE_DISCONNECT_RECONNECT, SCSI_MODE_PAGE_02_LENGTH-2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, }; U8 sat_default_mode_page_08[] = { SCSI_MODE_PAGE_CACHING, // Byte 0 - Page Code, SPF(0), PS(0) SCSI_MODE_PAGE_08_LENGTH-2, // Byte 1 - Page Length 0x00, // Byte 2 - IC, ABPF, CAP, DISC, SIZE, WCE(1), MF, RCD 0x00, // Byte 3 - Demand Read Retention Priority, Write Retention Priority 0x00, // Byte 4 - Disable Pre-Fetch Transfer Length 0x00, // Byte 5 0x00, // Byte 6 - Minimum Pre-Fetch 0x00, // Byte 7 0x00, // Byte 8 - Maximum Pre-Fetch 0x00, // Byte 9 0x00, // Byte 10 - Maximum Pre-Fetch Ceiling 0x00, // Byte 11 0x00, // Byte 12 - FSW, LBCSS, DRA(0), Vendor Specific, NV_DIS 0x00, // Byte 13 - Number of Cache Segments 0x00, // Byte 14 - Cache Segment Size 0x00, // Byte 15 0x00, // Byte 16 - Reserved 0x00, // Byte 17 - Non-Cache Segment Size 0x00, // Byte 18 0x00, // PAD }; U8 sat_changeable_mode_page_08[] = { SCSI_MODE_PAGE_CACHING, SCSI_MODE_PAGE_08_LENGTH-2, SCSI_MODE_PAGE_CACHE_PAGE_WCE_BIT, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, SCSI_MODE_PAGE_CACHE_PAGE_DRA_BIT, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // PAD }; U8 sat_default_mode_page_0A[] = { SCSI_MODE_PAGE_CONTROL, // Byte 0 - Page Code, SPF(0), PS(0) SCSI_MODE_PAGE_0A_LENGTH-2, // Byte 1 - Page Length 0x00, // Byte 2 - TST(0), TMF_ONLY(0), D_SENSE(0), GLTSD(0), RLEC(0) 0x10, // Byte 3 - Queue Algorithm(0), QErr(0) 0x00, // Byte 4 - TAS(0), RAC(0), UA_(0), SWP(0) 0x00, // Byte 5 - ATO(0), AUTOLOAD(0) 0x00, // Byte 6 0x00, // Byte 7 0xFF, // Byte 8 - Unlimited Busy timeout 0xFF, // Byte 9 0x00, // Byte 10 - do not support self time compl time xlation 0x00, // Byte 11 }; U8 sat_changeable_mode_page_0A[] = { SCSI_MODE_PAGE_CONTROL, SCSI_MODE_PAGE_0A_LENGTH-2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, }; U8 sat_default_mode_page_19[] = { SCSI_MODE_PAGE_PROTOCOL_SPECIFIC_PORT, // Byte 0 - PS, SPF, Page Code SCSI_MODE_PAGE_19_LENGTH-2, // Byte 1 - Page Length SCSI_MODE_PAGE19_SAS_ID, // Byte 2 - Rsvd, READY_LED, ProtoID 0x00, // PAD 0xFF, // Byte 4 - IT NLT MSB, 0xFF retry forever 0xFF, // Byte 5 - IT NLT LSB, 0xFF retry forever 0x00, // Byte 6 - IRT MSB, 0x0 disable init resp timer 0x00, // Byte 7 - IRT LSB, 0x0 disable init resp timer }; U8 sat_changeable_mode_page_19[] = { SCSI_MODE_PAGE_PROTOCOL_SPECIFIC_PORT, SCSI_MODE_PAGE_19_LENGTH-2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, }; U8 sat_default_mode_page_1C[] = { SCSI_MODE_PAGE_INFORMATIONAL_EXCP_CONTROL, // Byte 0 - Page Code, // SPF(0), PS(0) SCSI_MODE_PAGE_1C_LENGTH-2, // Byte 1 - Page Length SCSI_MODE_PAGE_DEXCPT_ENABLE, // Byte 2 - Perf, EBF, EWasc, // DExcpt(1), Test, LogErr 0x06, // Byte 3 -- MRIE (6 == values only available upon request) 0x00, // Byte 4 -- Interval Timer 0x00, // Byte 5 0x00, // Byte 6 0x00, // Byte 7 0x00, // Byte 8 -- Report Count 0x00, // Byte 9 0x00, // Byte 10 0x00, // Byte 11 }; U8 sat_changeable_mode_page_1C[] = { SCSI_MODE_PAGE_INFORMATIONAL_EXCP_CONTROL, SCSI_MODE_PAGE_1C_LENGTH-2, SCSI_MODE_PAGE_DEXCPT_ENABLE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, }; U8 sat_supported_mode_pages[] = { SCSI_MODE_PAGE_READ_WRITE_ERROR, SCSI_MODE_PAGE_DISCONNECT_RECONNECT, SCSI_MODE_PAGE_CACHING, SCSI_MODE_PAGE_CONTROL, SCSI_MODE_PAGE_INFORMATIONAL_EXCP_CONTROL }; U8 *sat_changeable_mode_pages[] = { sat_changeable_mode_page_01, sat_changeable_mode_page_02, sat_changeable_mode_page_08, sat_changeable_mode_page_0A, sat_changeable_mode_page_1C }; U8 *sat_default_mode_pages[] = { sat_default_mode_page_01, sat_default_mode_page_02, sat_default_mode_page_08, sat_default_mode_page_0A, sat_default_mode_page_1C }; U16 sat_mode_page_sizes[] = { sizeof(sat_default_mode_page_01), sizeof(sat_default_mode_page_02), sizeof(sat_default_mode_page_08), sizeof(sat_default_mode_page_0A), sizeof(sat_default_mode_page_1C) }; U16 sati_mode_page_get_page_index( U8 page_code ) { U16 index; for (index = 0; index < SAT_SUPPORTED_MODE_PAGES_LENGTH; index++) { if (sat_supported_mode_pages[index] == page_code) return index; } return SATI_MODE_PAGE_UNSUPPORTED_INDEX; } #endif // defined(ENABLE_SATI_MODE_PAGES)