/*- * SPDX-License-Identifier: BSD-2-Clause-FreeBSD * * Copyright (c) 1998, 2001 Nicolas Souchu * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD$ */ #ifndef __IICONF_H #define __IICONF_H #include #include #define IICPRI (PZERO+8) /* XXX sleep/wakeup queue priority */ #define LSB 0x1 /* * Options affecting iicbus_request_bus() */ #define IIC_DONTWAIT 0 #define IIC_NOINTR 0 #define IIC_WAIT 0x1 #define IIC_INTR 0x2 #define IIC_INTRWAIT (IIC_INTR | IIC_WAIT) #define IIC_RECURSIVE 0x4 #define IIC_REQBUS_DEV 0x8 /* See struct iic_reqbus_data, below. */ /* * The original iicbus->bridge callback api took a pointer to an int containing * flags. The new api allows a pointer to this struct, with IIC_REQBUS_DEV set * in the flags to let the implementation know the pointer is actually to this * struct which has the flags word first, followed by the device_t of the * requesting bus and device. * * Note that the requesting device may not be a i2c slave device which is a * child of the requested bus -- it may be a mux device which is electrically * part of the bus hierarchy, but whose driver belongs to some other bus * hierarchy such as gpio. */ struct iic_reqbus_data { int flags; /* Flags from the set defined above. */ device_t bus; /* The iicbus being requested. */ device_t dev; /* The device requesting the bus. */ }; /* * i2c modes */ #define IIC_MASTER 0x1 #define IIC_SLAVE 0x2 #define IIC_POLLED 0x4 /* * i2c speed */ #define IIC_UNKNOWN 0x0 #define IIC_SLOW 0x1 #define IIC_FAST 0x2 #define IIC_FASTEST 0x3 #define IIC_LAST_READ 0x1 /* * callback index */ #define IIC_REQUEST_BUS 0x1 #define IIC_RELEASE_BUS 0x2 /* * interrupt events */ #define INTR_GENERAL 0x1 /* general call received */ #define INTR_START 0x2 /* the I2C interface is addressed */ #define INTR_STOP 0x3 /* stop condition received */ #define INTR_RECEIVE 0x4 /* character received */ #define INTR_TRANSMIT 0x5 /* character to transmit */ #define INTR_ERROR 0x6 /* error */ #define INTR_NOACK 0x7 /* no ack from master receiver */ /* * adapter layer errors */ #define IIC_NOERR 0x0 /* no error occurred */ #define IIC_EBUSERR 0x1 /* bus error (hardware not in expected state) */ #define IIC_ENOACK 0x2 /* ack not received until timeout */ #define IIC_ETIMEOUT 0x3 /* timeout */ #define IIC_EBUSBSY 0x4 /* bus busy (reserved by another client) */ #define IIC_ESTATUS 0x5 /* status error */ #define IIC_EUNDERFLOW 0x6 /* slave ready for more data */ #define IIC_EOVERFLOW 0x7 /* too much data */ #define IIC_ENOTSUPP 0x8 /* request not supported */ #define IIC_ENOADDR 0x9 /* no address assigned to the interface */ #define IIC_ERESOURCE 0xa /* resources (memory, whatever) unavailable */ #define IIC_ERRNO __INT_MIN /* marker bit: errno is in low-order bits */ /* * Note that all iicbus functions return IIC_Exxxxx status values, * except iic2errno() (obviously) and iicbus_started() (returns bool). */ extern int iic2errno(int); extern int errno2iic(int); extern int iicbus_request_bus(device_t, device_t, int); extern int iicbus_release_bus(device_t, device_t); extern device_t iicbus_alloc_bus(device_t); extern void iicbus_intr(device_t, int, char *); extern int iicbus_null_repeated_start(device_t, u_char); extern int iicbus_null_callback(device_t, int, caddr_t); #define iicbus_reset(bus,speed,addr,oldaddr) \ (IICBUS_RESET(device_get_parent(bus), speed, addr, oldaddr)) /* basic I2C operations */ extern int iicbus_started(device_t); extern int iicbus_start(device_t, u_char, int); extern int iicbus_stop(device_t); extern int iicbus_repeated_start(device_t, u_char, int); extern int iicbus_write(device_t, const char *, int, int *, int); extern int iicbus_read(device_t, char *, int, int *, int, int); /* single byte read/write functions, start/stop not managed */ extern int iicbus_write_byte(device_t, char, int); extern int iicbus_read_byte(device_t, char *, int); /* Read/write operations with start/stop conditions managed */ extern int iicbus_block_write(device_t, u_char, char *, int, int *); extern int iicbus_block_read(device_t, u_char, char *, int, int *); /* vectors of iic operations to pass to bridge */ int iicbus_transfer(device_t bus, struct iic_msg *msgs, uint32_t nmsgs); int iicbus_transfer_excl(device_t bus, struct iic_msg *msgs, uint32_t nmsgs, int how); int iicbus_transfer_gen(device_t bus, struct iic_msg *msgs, uint32_t nmsgs); /* * Simple register read/write routines, but the "register" can be any size. * The transfers are done with iicbus_transfer_excl(). Reads use a repeat-start * between sending the address and reading; writes use a single start/stop. */ int iicdev_readfrom(device_t _slavedev, uint8_t _regaddr, void *_buffer, uint16_t _buflen, int _waithow); int iicdev_writeto(device_t _slavedev, uint8_t _regaddr, void *_buffer, uint16_t _buflen, int _waithow); #define IICBUS_MODVER 1 #define IICBUS_MINVER 1 #define IICBUS_MAXVER 1 #define IICBUS_PREFVER IICBUS_MODVER extern driver_t iicbb_driver; #define IICBB_MODVER 1 #define IICBB_MINVER 1 #define IICBB_MAXVER 1 #define IICBB_PREFVER IICBB_MODVER #endif