/*- * SPDX-License-Identifier: BSD-2-Clause * * Copyright (c) 2020 Amazon.com, Inc. or its affiliates. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "pl061.h" #include "gpio_if.h" #include "pic_if.h" #define PL061_LOCK(_sc) mtx_lock_spin(&(_sc)->sc_mtx) #define PL061_UNLOCK(_sc) mtx_unlock_spin(&(_sc)->sc_mtx) #define PL061_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->sc_mtx) #define PL061_ASSERT_LOCKED(_sc) mtx_assert(&(_sc)->sc_mtx, MA_OWNED) #define PL061_ASSERT_UNLOCKED(_sc) mtx_assert(&(_sc)->sc_mtx, MA_NOTOWNED) #if 0 #define dprintf(fmt, args...) do { \ printf(fmt, ##args); \ } while (0) #else #define dprintf(fmt, args...) #endif #define PL061_PIN_TO_ADDR(pin) (1 << (pin + 2)) #define PL061_DATA 0x3FC #define PL061_DIR 0x400 #define PL061_INTSENSE 0x404 #define PL061_INTBOTHEDGES 0x408 #define PL061_INTEVENT 0x40C #define PL061_INTMASK 0x410 #define PL061_RAWSTATUS 0x414 #define PL061_STATUS 0x418 #define PL061_INTCLR 0x41C #define PL061_MODECTRL 0x420 #define PL061_ALLOWED_CAPS (GPIO_PIN_INPUT | GPIO_PIN_OUTPUT | GPIO_INTR_EDGE_BOTH | \ GPIO_INTR_EDGE_RISING | GPIO_INTR_EDGE_FALLING | \ GPIO_INTR_LEVEL_HIGH | GPIO_INTR_LEVEL_LOW ) #define PIC_INTR_ISRC(sc, irq) (&(sc->sc_isrcs[irq].isrc)) static device_t pl061_get_bus(device_t dev) { struct pl061_softc *sc; sc = device_get_softc(dev); return (sc->sc_busdev); } static int pl061_pin_max(device_t dev, int *maxpin) { *maxpin = PL061_NUM_GPIO - 1; return (0); } static int pl061_pin_getname(device_t dev, uint32_t pin, char *name) { if (pin >= PL061_NUM_GPIO) return (EINVAL); snprintf(name, GPIOMAXNAME, "p%u", pin); name[GPIOMAXNAME - 1] = '\0'; return (0); } static int pl061_pin_getflags(device_t dev, uint32_t pin, uint32_t *flags) { struct pl061_softc *sc; uint8_t mask = 1 << pin; sc = device_get_softc(dev); if (pin >= PL061_NUM_GPIO) return (EINVAL); PL061_LOCK(sc); *flags = 0; if (mask & bus_read_1(sc->sc_mem_res, PL061_DIR)) *flags |= GPIO_PIN_OUTPUT; else *flags |= GPIO_PIN_INPUT; PL061_UNLOCK(sc); return (0); } static int pl061_pin_getcaps(device_t dev, uint32_t pin, uint32_t *caps) { if (pin >= PL061_NUM_GPIO) return (EINVAL); *caps = PL061_ALLOWED_CAPS; return (0); } static void mask_and_set(struct pl061_softc *sc, long a, uint8_t m, uint8_t b) { uint8_t tmp; tmp = bus_read_1(sc->sc_mem_res, a); tmp &= ~m; tmp |= b; bus_write_1(sc->sc_mem_res, a, tmp); dprintf("%s: writing %#x to register %#lx\n", __func__, tmp, a); } static int pl061_pin_setflags(device_t dev, uint32_t pin, uint32_t flags) { struct pl061_softc *sc; uint8_t mask = 1 << pin; const uint32_t in_out = (GPIO_PIN_INPUT | GPIO_PIN_OUTPUT); sc = device_get_softc(dev); if (pin >= PL061_NUM_GPIO) return (EINVAL); if (flags & ~PL061_ALLOWED_CAPS) return (EINVAL); /* can't be both input and output */ if ((flags & in_out) == in_out) return (EINVAL); PL061_LOCK(sc); mask_and_set(sc, PL061_DIR, mask, flags & GPIO_PIN_OUTPUT ? mask : 0); PL061_UNLOCK(sc); return (0); } static int pl061_pin_get(device_t dev, uint32_t pin, uint32_t *value) { struct pl061_softc *sc; sc = device_get_softc(dev); if (pin >= PL061_NUM_GPIO) return (EINVAL); PL061_LOCK(sc); if (bus_read_1(sc->sc_mem_res, PL061_PIN_TO_ADDR(pin))) *value = GPIO_PIN_HIGH; else *value = GPIO_PIN_LOW; PL061_UNLOCK(sc); return (0); } static int pl061_pin_set(device_t dev, uint32_t pin, uint32_t value) { struct pl061_softc *sc; uint8_t d = (value == GPIO_PIN_HIGH) ? 0xff : 0x00; sc = device_get_softc(dev); if (pin >= PL061_NUM_GPIO) return (EINVAL); PL061_LOCK(sc); bus_write_1(sc->sc_mem_res, PL061_PIN_TO_ADDR(pin), d); PL061_UNLOCK(sc); return (0); } static int pl061_pin_toggle(device_t dev, uint32_t pin) { struct pl061_softc *sc; uint8_t d; sc = device_get_softc(dev); if (pin >= PL061_NUM_GPIO) return (EINVAL); PL061_LOCK(sc); d = ~bus_read_1(sc->sc_mem_res, PL061_PIN_TO_ADDR(pin)); bus_write_1(sc->sc_mem_res, PL061_PIN_TO_ADDR(pin), d); PL061_UNLOCK(sc); return (0); } static void pl061_pic_disable_intr(device_t dev, struct intr_irqsrc *isrc) { struct pl061_softc *sc; uint8_t mask; sc = device_get_softc(dev); mask = 1 << ((struct pl061_pin_irqsrc *)isrc)->irq; dprintf("%s: calling disable interrupt %#x\n", __func__, mask); PL061_LOCK(sc); mask_and_set(sc, PL061_INTMASK, mask, 0); PL061_UNLOCK(sc); } static void pl061_pic_enable_intr(device_t dev, struct intr_irqsrc *isrc) { struct pl061_softc *sc; uint8_t mask; sc = device_get_softc(dev); mask = 1 << ((struct pl061_pin_irqsrc *)isrc)->irq; dprintf("%s: calling enable interrupt %#x\n", __func__, mask); PL061_LOCK(sc); mask_and_set(sc, PL061_INTMASK, mask, mask); PL061_UNLOCK(sc); } static int pl061_pic_map_intr(device_t dev, struct intr_map_data *data, struct intr_irqsrc **isrcp) { struct pl061_softc *sc; struct intr_map_data_gpio *gdata; uint32_t irq; sc = device_get_softc(dev); if (data->type != INTR_MAP_DATA_GPIO) return (ENOTSUP); gdata = (struct intr_map_data_gpio *)data; irq = gdata->gpio_pin_num; if (irq >= PL061_NUM_GPIO) { device_printf(dev, "invalid interrupt number %u\n", irq); return (EINVAL); } dprintf("%s: calling map interrupt %u\n", __func__, irq); *isrcp = PIC_INTR_ISRC(sc, irq); return (0); } static int pl061_pic_setup_intr(device_t dev, struct intr_irqsrc *isrc, struct resource *res, struct intr_map_data *data) { struct pl061_softc *sc; struct intr_map_data_gpio *gdata; struct pl061_pin_irqsrc *irqsrc; uint32_t mode; uint8_t mask; if (data == NULL) return (ENOTSUP); sc = device_get_softc(dev); gdata = (struct intr_map_data_gpio *)data; irqsrc = (struct pl061_pin_irqsrc *)isrc; mode = gdata->gpio_intr_mode; mask = 1 << gdata->gpio_pin_num; dprintf("%s: calling setup interrupt %u mode %#x\n", __func__, irqsrc->irq, mode); if (irqsrc->irq != gdata->gpio_pin_num) { dprintf("%s: interrupts don't match\n", __func__); return (EINVAL); } if (isrc->isrc_handlers != 0) { dprintf("%s: handler already attached\n", __func__); return (irqsrc->mode == mode ? 0 : EINVAL); } irqsrc->mode = mode; PL061_LOCK(sc); if (mode & GPIO_INTR_EDGE_BOTH) { mask_and_set(sc, PL061_INTBOTHEDGES, mask, mask); mask_and_set(sc, PL061_INTSENSE, mask, 0); } else if (mode & GPIO_INTR_EDGE_RISING) { mask_and_set(sc, PL061_INTBOTHEDGES, mask, 0); mask_and_set(sc, PL061_INTSENSE, mask, 0); mask_and_set(sc, PL061_INTEVENT, mask, mask); } else if (mode & GPIO_INTR_EDGE_FALLING) { mask_and_set(sc, PL061_INTBOTHEDGES, mask, 0); mask_and_set(sc, PL061_INTSENSE, mask, 0); mask_and_set(sc, PL061_INTEVENT, mask, 0); } else if (mode & GPIO_INTR_LEVEL_HIGH) { mask_and_set(sc, PL061_INTBOTHEDGES, mask, 0); mask_and_set(sc, PL061_INTSENSE, mask, mask); mask_and_set(sc, PL061_INTEVENT, mask, mask); } else if (mode & GPIO_INTR_LEVEL_LOW) { mask_and_set(sc, PL061_INTBOTHEDGES, mask, 0); mask_and_set(sc, PL061_INTSENSE, mask, mask); mask_and_set(sc, PL061_INTEVENT, mask, 0); } PL061_UNLOCK(sc); return (0); } static int pl061_pic_teardown_intr(device_t dev, struct intr_irqsrc *isrc, struct resource *res, struct intr_map_data *data) { struct pl061_softc *sc; struct pl061_pin_irqsrc *irqsrc; uint8_t mask; irqsrc = (struct pl061_pin_irqsrc *)isrc; mask = 1 << irqsrc->irq; dprintf("%s: calling teardown interrupt %#x\n", __func__, mask); sc = device_get_softc(dev); if (isrc->isrc_handlers == 0) { irqsrc->mode = GPIO_INTR_CONFORM; PL061_LOCK(sc); mask_and_set(sc, PL061_INTMASK, mask, 0); PL061_UNLOCK(sc); } return (0); } static void pl061_pic_post_filter(device_t dev, struct intr_irqsrc *isrc) { struct pl061_softc *sc; uint8_t mask; sc = device_get_softc(dev); mask = 1 << ((struct pl061_pin_irqsrc *)isrc)->irq; dprintf("%s: calling post filter %#x\n", __func__, mask); bus_write_1(sc->sc_mem_res, PL061_INTCLR, mask); } static void pl061_pic_post_ithread(device_t dev, struct intr_irqsrc *isrc) { struct pl061_softc *sc; uint8_t mask; sc = device_get_softc(dev); mask = 1 << ((struct pl061_pin_irqsrc *)isrc)->irq; dprintf("%s: calling post ithread %#x\n", __func__, mask); bus_write_1(sc->sc_mem_res, PL061_INTCLR, mask); pl061_pic_enable_intr(dev, isrc); } static void pl061_pic_pre_ithread(device_t dev, struct intr_irqsrc *isrc) { pl061_pic_disable_intr(dev, isrc); } static int pl061_intr(void *arg) { struct pl061_softc *sc; struct trapframe *tf; uint8_t status; int pin; sc = (struct pl061_softc *)arg; tf = curthread->td_intr_frame; status = bus_read_1(sc->sc_mem_res, PL061_STATUS); while (status != 0) { pin = ffs(status) - 1; status &= ~(1 << pin); if (intr_isrc_dispatch(PIC_INTR_ISRC(sc, pin), tf) != 0) device_printf(sc->sc_dev, "spurious interrupt %d\n", pin); dprintf("got IRQ on %d\n", pin); } return (FILTER_HANDLED); } int pl061_attach(device_t dev) { struct pl061_softc *sc; int ret; int irq; const char *name; sc = device_get_softc(dev); sc->sc_dev = dev; sc->sc_mem_rid = 0; sc->sc_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &sc->sc_mem_rid, RF_ACTIVE); if (sc->sc_mem_res == NULL) { device_printf(dev, "can't allocate memory resource\n"); return (ENXIO); } sc->sc_irq_rid = 0; sc->sc_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &sc->sc_irq_rid, RF_ACTIVE); if (sc->sc_irq_res == NULL) { device_printf(dev, "can't allocate IRQ resource\n"); goto free_mem; } ret = bus_setup_intr(dev, sc->sc_irq_res, INTR_TYPE_MISC | INTR_MPSAFE, pl061_intr, NULL, sc, &sc->sc_irq_hdlr); if (ret) { device_printf(dev, "can't setup IRQ\n"); goto free_pic; } name = device_get_nameunit(dev); for (irq = 0; irq < PL061_NUM_GPIO; irq++) { if (bootverbose) { device_printf(dev, "trying to register pin %d name %s\n", irq, name); } sc->sc_isrcs[irq].irq = irq; sc->sc_isrcs[irq].mode = GPIO_INTR_CONFORM; ret = intr_isrc_register(PIC_INTR_ISRC(sc, irq), dev, 0, "%s", name); if (ret) { device_printf(dev, "can't register isrc %d\n", ret); goto free_isrc; } } sc->sc_busdev = gpiobus_attach_bus(dev); if (sc->sc_busdev == NULL) { device_printf(dev, "couldn't attach gpio bus\n"); goto free_isrc; } mtx_init(&sc->sc_mtx, device_get_nameunit(dev), "pl061", MTX_SPIN); return (0); free_isrc: /* * XXX isrc_release_counters() not implemented * for (irq = 0; irq < PL061_NUM_GPIO; irq++) * intr_isrc_deregister(PIC_INTR_ISRC(sc, irq)); */ bus_release_resource(dev, SYS_RES_IRQ, sc->sc_irq_rid, sc->sc_irq_res); free_pic: /* * XXX intr_pic_deregister: not implemented * intr_pic_deregister(dev, 0); */ free_mem: bus_release_resource(dev, SYS_RES_MEMORY, sc->sc_mem_rid, sc->sc_mem_res); return (ENXIO); } int pl061_detach(device_t dev) { struct pl061_softc *sc; sc = device_get_softc(dev); if (sc->sc_busdev) gpiobus_detach_bus(dev); if (sc->sc_irq_hdlr != NULL) bus_teardown_intr(dev, sc->sc_irq_res, sc->sc_irq_hdlr); if (sc->sc_irq_res != NULL) bus_release_resource(dev, SYS_RES_IRQ, sc->sc_irq_rid, sc->sc_irq_res); if (sc->sc_mem_res != NULL) bus_release_resource(dev, SYS_RES_MEMORY, sc->sc_mem_rid, sc->sc_mem_res); PL061_LOCK_DESTROY(sc); return (0); } static device_method_t pl061_methods[] = { /* Device interface */ DEVMETHOD(device_attach, pl061_attach), DEVMETHOD(device_detach, pl061_detach), /* Bus interface */ DEVMETHOD(bus_setup_intr, bus_generic_setup_intr), DEVMETHOD(bus_activate_resource, bus_generic_activate_resource), DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource), /* GPIO protocol */ DEVMETHOD(gpio_get_bus, pl061_get_bus), DEVMETHOD(gpio_pin_max, pl061_pin_max), DEVMETHOD(gpio_pin_getname, pl061_pin_getname), DEVMETHOD(gpio_pin_getflags, pl061_pin_getflags), DEVMETHOD(gpio_pin_getcaps, pl061_pin_getcaps), DEVMETHOD(gpio_pin_setflags, pl061_pin_setflags), DEVMETHOD(gpio_pin_get, pl061_pin_get), DEVMETHOD(gpio_pin_set, pl061_pin_set), DEVMETHOD(gpio_pin_toggle, pl061_pin_toggle), /* Interrupt controller interface */ DEVMETHOD(pic_disable_intr, pl061_pic_disable_intr), DEVMETHOD(pic_enable_intr, pl061_pic_enable_intr), DEVMETHOD(pic_map_intr, pl061_pic_map_intr), DEVMETHOD(pic_setup_intr, pl061_pic_setup_intr), DEVMETHOD(pic_teardown_intr, pl061_pic_teardown_intr), DEVMETHOD(pic_post_filter, pl061_pic_post_filter), DEVMETHOD(pic_post_ithread, pl061_pic_post_ithread), DEVMETHOD(pic_pre_ithread, pl061_pic_pre_ithread), DEVMETHOD_END }; DEFINE_CLASS_0(gpio, pl061_driver, pl061_methods, sizeof(struct pl061_softc));