/*- * Copyright (c) 2013 Luiz Otavio O Souza. * Copyright (c) 2011-2012 Stefan Bethke. * Copyright (c) 2012 Adrian Chadd. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD$ */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * IP175C specific functions. */ /* * Reset the switch. */ static int ip175c_reset(struct ip17x_softc *sc) { uint32_t data; /* Reset all the switch settings. */ if (ip17x_writephy(sc->sc_dev, IP175C_RESET_PHY, IP175C_RESET_REG, 0x175c)) return (-1); DELAY(2000); /* Force IP175C mode. */ data = ip17x_readphy(sc->sc_dev, IP175C_MODE_PHY, IP175C_MODE_REG); if (data == 0x175a) { if (ip17x_writephy(sc->sc_dev, IP175C_MODE_PHY, IP175C_MODE_REG, 0x175c)) return (-1); } return (0); } static int ip175c_port_vlan_setup(struct ip17x_softc *sc) { struct ip17x_vlan *v; uint32_t ports[IP175X_NUM_PORTS], reg[IP175X_NUM_PORTS/2]; int i, err, phy; KASSERT(sc->cpuport == 5, ("cpuport != 5 not supported for IP175C")); KASSERT(sc->numports == 6, ("numports != 6 not supported for IP175C")); /* Build the port access masks. */ memset(ports, 0, sizeof(ports)); for (i = 0; i < sc->info.es_nports; i++) { phy = sc->portphy[i]; v = &sc->vlan[i]; ports[phy] = v->ports; } /* Move the cpuport bit to its correct place. */ for (i = 0; i < sc->numports; i++) { if (ports[i] & (1 << sc->cpuport)) { ports[i] |= (1 << 7); ports[i] &= ~(1 << sc->cpuport); } } /* And now build the switch register data. */ memset(reg, 0, sizeof(reg)); for (i = 0; i < (sc->numports / 2); i++) reg[i] = ports[i * 2] << 8 | ports[i * 2 + 1]; /* Update the switch resgisters. */ err = ip17x_writephy(sc->sc_dev, 29, 19, reg[0]); if (err == 0) err = ip17x_writephy(sc->sc_dev, 29, 20, reg[1]); if (err == 0) err = ip17x_updatephy(sc->sc_dev, 29, 21, 0xff00, reg[2]); if (err == 0) err = ip17x_updatephy(sc->sc_dev, 30, 18, 0x00ff, reg[2]); return (err); } static int ip175c_dot1q_vlan_setup(struct ip17x_softc *sc) { struct ip17x_vlan *v; uint32_t data; uint32_t vlans[IP17X_MAX_VLANS]; int i, j; KASSERT(sc->cpuport == 5, ("cpuport != 5 not supported for IP175C")); KASSERT(sc->numports == 6, ("numports != 6 not supported for IP175C")); /* Add and strip VLAN tags. */ data = (sc->addtag & ~(1 << IP175X_CPU_PORT)) << 11; data |= (sc->striptag & ~(1 << IP175X_CPU_PORT)) << 6; if (sc->addtag & (1 << IP175X_CPU_PORT)) data |= (1 << 1); if (sc->striptag & (1 << IP175X_CPU_PORT)) data |= (1 << 0); if (ip17x_writephy(sc->sc_dev, 29, 23, data)) return (-1); /* Set the VID_IDX_SEL to 0. */ if (ip17x_updatephy(sc->sc_dev, 30, 9, 0x70, 0)) return (-1); /* Calculate the port masks. */ memset(vlans, 0, sizeof(vlans)); for (i = 0; i < IP17X_MAX_VLANS; i++) { v = &sc->vlan[i]; if ((v->vlanid & ETHERSWITCH_VID_VALID) == 0) continue; vlans[v->vlanid & ETHERSWITCH_VID_MASK] = v->ports; } for (j = 0, i = 1; i <= IP17X_MAX_VLANS / 2; i++) { data = vlans[j++] & 0x3f; data |= (vlans[j++] & 0x3f) << 8; if (ip17x_writephy(sc->sc_dev, 30, i, data)) return (-1); } /* Port default VLAN ID. */ for (i = 0; i < sc->numports; i++) { if (i == IP175X_CPU_PORT) { if (ip17x_writephy(sc->sc_dev, 29, 30, sc->pvid[i])) return (-1); } else { if (ip17x_writephy(sc->sc_dev, 29, 24 + i, sc->pvid[i])) return (-1); } } return (0); } /* * Set the Switch configuration. */ static int ip175c_hw_setup(struct ip17x_softc *sc) { switch (sc->vlan_mode) { case ETHERSWITCH_VLAN_PORT: return (ip175c_port_vlan_setup(sc)); break; case ETHERSWITCH_VLAN_DOT1Q: return (ip175c_dot1q_vlan_setup(sc)); break; } return (-1); } /* * Set the switch VLAN mode. */ static int ip175c_set_vlan_mode(struct ip17x_softc *sc, uint32_t mode) { switch (mode) { case ETHERSWITCH_VLAN_DOT1Q: /* Enable VLAN tag processing. */ ip17x_updatephy(sc->sc_dev, 30, 9, 0x80, 0x80); sc->vlan_mode = mode; break; case ETHERSWITCH_VLAN_PORT: default: /* Disable VLAN tag processing. */ ip17x_updatephy(sc->sc_dev, 30, 9, 0x80, 0); sc->vlan_mode = ETHERSWITCH_VLAN_PORT; break; } /* Reset vlans. */ ip17x_reset_vlans(sc, sc->vlan_mode); /* Update switch configuration. */ ip175c_hw_setup(sc); return (0); } /* * Get the switch VLAN mode. */ static int ip175c_get_vlan_mode(struct ip17x_softc *sc) { return (sc->vlan_mode); } void ip175c_attach(struct ip17x_softc *sc) { sc->hal.ip17x_reset = ip175c_reset; sc->hal.ip17x_hw_setup = ip175c_hw_setup; sc->hal.ip17x_get_vlan_mode = ip175c_get_vlan_mode; sc->hal.ip17x_set_vlan_mode = ip175c_set_vlan_mode; /* Defaults for IP175C. */ sc->cpuport = IP175X_CPU_PORT; sc->numports = IP175X_NUM_PORTS; sc->info.es_vlan_caps = ETHERSWITCH_VLAN_PORT | ETHERSWITCH_VLAN_DOT1Q; device_printf(sc->sc_dev, "type: IP175C\n"); }