/*- * Copyright (c) 2015 Semihalf * Copyright (c) 2015 Stormshield * Copyright (c) 2018-2019, Rubicon Communications, LLC (Netgate) * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "e6000swreg.h" #include "etherswitch_if.h" #include "miibus_if.h" #include "mdio_if.h" MALLOC_DECLARE(M_E6000SW); MALLOC_DEFINE(M_E6000SW, "e6000sw", "e6000sw switch"); #define E6000SW_LOCK(_sc) sx_xlock(&(_sc)->sx) #define E6000SW_UNLOCK(_sc) sx_unlock(&(_sc)->sx) #define E6000SW_LOCK_ASSERT(_sc, _what) sx_assert(&(_sc)->sx, (_what)) #define E6000SW_TRYLOCK(_sc) sx_tryxlock(&(_sc)->sx) #define E6000SW_WAITREADY(_sc, _reg, _bit) \ e6000sw_waitready((_sc), REG_GLOBAL, (_reg), (_bit)) #define E6000SW_WAITREADY2(_sc, _reg, _bit) \ e6000sw_waitready((_sc), REG_GLOBAL2, (_reg), (_bit)) #define MDIO_READ(dev, addr, reg) \ MDIO_READREG(device_get_parent(dev), (addr), (reg)) #define MDIO_WRITE(dev, addr, reg, val) \ MDIO_WRITEREG(device_get_parent(dev), (addr), (reg), (val)) typedef struct e6000sw_softc { device_t dev; phandle_t node; struct sx sx; if_t ifp[E6000SW_MAX_PORTS]; char *ifname[E6000SW_MAX_PORTS]; device_t miibus[E6000SW_MAX_PORTS]; struct taskqueue *sc_tq; struct timeout_task sc_tt; int vlans[E6000SW_NUM_VLANS]; uint32_t swid; uint32_t vlan_mode; uint32_t cpuports_mask; uint32_t fixed_mask; uint32_t fixed25_mask; uint32_t ports_mask; int phy_base; int sw_addr; int num_ports; } e6000sw_softc_t; static etherswitch_info_t etherswitch_info = { .es_nports = 0, .es_nvlangroups = 0, .es_vlan_caps = ETHERSWITCH_VLAN_PORT | ETHERSWITCH_VLAN_DOT1Q, .es_name = "Marvell 6000 series switch" }; static void e6000sw_identify(driver_t *, device_t); static int e6000sw_probe(device_t); static int e6000sw_parse_fixed_link(e6000sw_softc_t *, phandle_t, uint32_t); static int e6000sw_parse_ethernet(e6000sw_softc_t *, phandle_t, uint32_t); static int e6000sw_attach(device_t); static int e6000sw_detach(device_t); static int e6000sw_read_xmdio(device_t, int, int, int); static int e6000sw_write_xmdio(device_t, int, int, int, int); static int e6000sw_readphy(device_t, int, int); static int e6000sw_writephy(device_t, int, int, int); static int e6000sw_readphy_locked(device_t, int, int); static int e6000sw_writephy_locked(device_t, int, int, int); static etherswitch_info_t* e6000sw_getinfo(device_t); static int e6000sw_getconf(device_t, etherswitch_conf_t *); static int e6000sw_setconf(device_t, etherswitch_conf_t *); static void e6000sw_lock(device_t); static void e6000sw_unlock(device_t); static int e6000sw_getport(device_t, etherswitch_port_t *); static int e6000sw_setport(device_t, etherswitch_port_t *); static int e6000sw_set_vlan_mode(e6000sw_softc_t *, uint32_t); static int e6000sw_readreg_wrapper(device_t, int); static int e6000sw_writereg_wrapper(device_t, int, int); static int e6000sw_getvgroup_wrapper(device_t, etherswitch_vlangroup_t *); static int e6000sw_setvgroup_wrapper(device_t, etherswitch_vlangroup_t *); static int e6000sw_setvgroup(device_t, etherswitch_vlangroup_t *); static int e6000sw_getvgroup(device_t, etherswitch_vlangroup_t *); static void e6000sw_setup(device_t, e6000sw_softc_t *); static void e6000sw_tick(void *, int); static void e6000sw_set_atustat(device_t, e6000sw_softc_t *, int, int); static int e6000sw_atu_flush(device_t, e6000sw_softc_t *, int); static int e6000sw_vtu_flush(e6000sw_softc_t *); static int e6000sw_vtu_update(e6000sw_softc_t *, int, int, int, int, int); static __inline void e6000sw_writereg(e6000sw_softc_t *, int, int, int); static __inline uint32_t e6000sw_readreg(e6000sw_softc_t *, int, int); static int e6000sw_ifmedia_upd(if_t); static void e6000sw_ifmedia_sts(if_t, struct ifmediareq *); static int e6000sw_atu_mac_table(device_t, e6000sw_softc_t *, struct atu_opt *, int); static int e6000sw_get_pvid(e6000sw_softc_t *, int, int *); static void e6000sw_set_pvid(e6000sw_softc_t *, int, int); static __inline bool e6000sw_is_cpuport(e6000sw_softc_t *, int); static __inline bool e6000sw_is_fixedport(e6000sw_softc_t *, int); static __inline bool e6000sw_is_fixed25port(e6000sw_softc_t *, int); static __inline bool e6000sw_is_phyport(e6000sw_softc_t *, int); static __inline bool e6000sw_is_portenabled(e6000sw_softc_t *, int); static __inline struct mii_data *e6000sw_miiforphy(e6000sw_softc_t *, unsigned int); static device_method_t e6000sw_methods[] = { /* device interface */ DEVMETHOD(device_identify, e6000sw_identify), DEVMETHOD(device_probe, e6000sw_probe), DEVMETHOD(device_attach, e6000sw_attach), DEVMETHOD(device_detach, e6000sw_detach), /* bus interface */ DEVMETHOD(bus_add_child, device_add_child_ordered), /* mii interface */ DEVMETHOD(miibus_readreg, e6000sw_readphy_locked), DEVMETHOD(miibus_writereg, e6000sw_writephy_locked), /* etherswitch interface */ DEVMETHOD(etherswitch_getinfo, e6000sw_getinfo), DEVMETHOD(etherswitch_getconf, e6000sw_getconf), DEVMETHOD(etherswitch_setconf, e6000sw_setconf), DEVMETHOD(etherswitch_lock, e6000sw_lock), DEVMETHOD(etherswitch_unlock, e6000sw_unlock), DEVMETHOD(etherswitch_getport, e6000sw_getport), DEVMETHOD(etherswitch_setport, e6000sw_setport), DEVMETHOD(etherswitch_readreg, e6000sw_readreg_wrapper), DEVMETHOD(etherswitch_writereg, e6000sw_writereg_wrapper), DEVMETHOD(etherswitch_readphyreg, e6000sw_readphy), DEVMETHOD(etherswitch_writephyreg, e6000sw_writephy), DEVMETHOD(etherswitch_setvgroup, e6000sw_setvgroup_wrapper), DEVMETHOD(etherswitch_getvgroup, e6000sw_getvgroup_wrapper), DEVMETHOD_END }; DEFINE_CLASS_0(e6000sw, e6000sw_driver, e6000sw_methods, sizeof(e6000sw_softc_t)); DRIVER_MODULE(e6000sw, mdio, e6000sw_driver, 0, 0); DRIVER_MODULE(etherswitch, e6000sw, etherswitch_driver, 0, 0); DRIVER_MODULE(miibus, e6000sw, miibus_driver, 0, 0); MODULE_DEPEND(e6000sw, mdio, 1, 1, 1); static void e6000sw_identify(driver_t *driver, device_t parent) { if (device_find_child(parent, "e6000sw", -1) == NULL) BUS_ADD_CHILD(parent, 0, "e6000sw", -1); } static int e6000sw_probe(device_t dev) { e6000sw_softc_t *sc; const char *description; phandle_t switch_node; sc = device_get_softc(dev); switch_node = ofw_bus_find_compatible(OF_finddevice("/"), "marvell,mv88e6085"); if (switch_node == 0) { switch_node = ofw_bus_find_compatible(OF_finddevice("/"), "marvell,mv88e6190"); if (switch_node == 0) return (ENXIO); /* * Trust DTS and fix the port register offset for the MV88E6190 * detection bellow. */ sc->swid = MV88E6190; } if (bootverbose) device_printf(dev, "Found switch_node: 0x%x\n", switch_node); sc->dev = dev; sc->node = switch_node; if (OF_getencprop(sc->node, "reg", &sc->sw_addr, sizeof(sc->sw_addr)) < 0) return (ENXIO); if (sc->sw_addr < 0 || sc->sw_addr > 32) return (ENXIO); /* * Create temporary lock, just to satisfy assertions, * when obtaining the switch ID. Destroy immediately afterwards. */ sx_init(&sc->sx, "e6000sw_tmp"); E6000SW_LOCK(sc); sc->swid = e6000sw_readreg(sc, REG_PORT(sc, 0), SWITCH_ID) & 0xfff0; E6000SW_UNLOCK(sc); sx_destroy(&sc->sx); switch (sc->swid) { case MV88E6141: description = "Marvell 88E6141"; sc->phy_base = 0x10; sc->num_ports = 6; break; case MV88E6341: description = "Marvell 88E6341"; sc->phy_base = 0x10; sc->num_ports = 6; break; case MV88E6352: description = "Marvell 88E6352"; sc->num_ports = 7; break; case MV88E6172: description = "Marvell 88E6172"; sc->num_ports = 7; break; case MV88E6176: description = "Marvell 88E6176"; sc->num_ports = 7; break; case MV88E6190: description = "Marvell 88E6190"; sc->num_ports = 11; break; default: device_printf(dev, "Unrecognized device, id 0x%x.\n", sc->swid); return (ENXIO); } device_set_desc(dev, description); return (BUS_PROBE_DEFAULT); } static int e6000sw_parse_fixed_link(e6000sw_softc_t *sc, phandle_t node, uint32_t port) { int speed; phandle_t fixed_link; fixed_link = ofw_bus_find_child(node, "fixed-link"); if (fixed_link != 0) { sc->fixed_mask |= (1 << port); if (OF_getencprop(fixed_link, "speed", &speed, sizeof(speed)) < 0) { device_printf(sc->dev, "Port %d has a fixed-link node without a speed " "property\n", port); return (ENXIO); } if (speed == 2500 && (MVSWITCH(sc, MV88E6141) || MVSWITCH(sc, MV88E6341) || MVSWITCH(sc, MV88E6190))) sc->fixed25_mask |= (1 << port); } return (0); } static int e6000sw_parse_ethernet(e6000sw_softc_t *sc, phandle_t port_handle, uint32_t port) { phandle_t switch_eth, switch_eth_handle; if (OF_getencprop(port_handle, "ethernet", (void*)&switch_eth_handle, sizeof(switch_eth_handle)) > 0) { if (switch_eth_handle > 0) { switch_eth = OF_node_from_xref(switch_eth_handle); device_printf(sc->dev, "CPU port at %d\n", port); sc->cpuports_mask |= (1 << port); return (e6000sw_parse_fixed_link(sc, switch_eth, port)); } else device_printf(sc->dev, "Port %d has ethernet property but it points " "to an invalid location\n", port); } return (0); } static int e6000sw_parse_child_fdt(e6000sw_softc_t *sc, phandle_t child, int *pport) { uint32_t port; if (pport == NULL) return (ENXIO); if (OF_getencprop(child, "reg", (void *)&port, sizeof(port)) < 0) return (ENXIO); if (port >= sc->num_ports) return (ENXIO); *pport = port; if (e6000sw_parse_fixed_link(sc, child, port) != 0) return (ENXIO); if (e6000sw_parse_ethernet(sc, child, port) != 0) return (ENXIO); if ((sc->fixed_mask & (1 << port)) != 0) device_printf(sc->dev, "fixed port at %d\n", port); else device_printf(sc->dev, "PHY at port %d\n", port); return (0); } static int e6000sw_init_interface(e6000sw_softc_t *sc, int port) { char name[IFNAMSIZ]; snprintf(name, IFNAMSIZ, "%sport", device_get_nameunit(sc->dev)); sc->ifp[port] = if_alloc(IFT_ETHER); if (sc->ifp[port] == NULL) return (ENOMEM); if_setsoftc(sc->ifp[port], sc); if_setflagbits(sc->ifp[port], IFF_UP | IFF_BROADCAST | IFF_DRV_RUNNING | IFF_SIMPLEX, 0); sc->ifname[port] = malloc(strlen(name) + 1, M_E6000SW, M_NOWAIT); if (sc->ifname[port] == NULL) { if_free(sc->ifp[port]); return (ENOMEM); } memcpy(sc->ifname[port], name, strlen(name) + 1); if_initname(sc->ifp[port], sc->ifname[port], port); return (0); } static int e6000sw_attach_miibus(e6000sw_softc_t *sc, int port) { int err; err = mii_attach(sc->dev, &sc->miibus[port], sc->ifp[port], e6000sw_ifmedia_upd, e6000sw_ifmedia_sts, BMSR_DEFCAPMASK, port + sc->phy_base, MII_OFFSET_ANY, 0); if (err != 0) return (err); return (0); } static void e6000sw_serdes_power(device_t dev, int port, bool sgmii) { uint32_t reg; /* SGMII */ reg = e6000sw_read_xmdio(dev, port, E6000SW_SERDES_DEV, E6000SW_SERDES_SGMII_CTL); if (sgmii) reg &= ~E6000SW_SERDES_PDOWN; else reg |= E6000SW_SERDES_PDOWN; e6000sw_write_xmdio(dev, port, E6000SW_SERDES_DEV, E6000SW_SERDES_SGMII_CTL, reg); /* 10GBASE-R/10GBASE-X4/X2 */ reg = e6000sw_read_xmdio(dev, port, E6000SW_SERDES_DEV, E6000SW_SERDES_PCS_CTL1); if (sgmii) reg |= E6000SW_SERDES_PDOWN; else reg &= ~E6000SW_SERDES_PDOWN; e6000sw_write_xmdio(dev, port, E6000SW_SERDES_DEV, E6000SW_SERDES_PCS_CTL1, reg); } static int e6000sw_attach(device_t dev) { bool sgmii; e6000sw_softc_t *sc; phandle_t child, ports; int err, port; uint32_t reg; err = 0; sc = device_get_softc(dev); /* * According to the Linux source code, all of the Switch IDs we support * are multi_chip capable, and should go into multi-chip mode if the * sw_addr != 0. */ if (MVSWITCH_MULTICHIP(sc)) device_printf(dev, "multi-chip addressing mode (%#x)\n", sc->sw_addr); else device_printf(dev, "single-chip addressing mode\n"); sx_init(&sc->sx, "e6000sw"); E6000SW_LOCK(sc); e6000sw_setup(dev, sc); ports = ofw_bus_find_child(sc->node, "ports"); sc->sc_tq = taskqueue_create("e6000sw_taskq", M_NOWAIT, taskqueue_thread_enqueue, &sc->sc_tq); TIMEOUT_TASK_INIT(sc->sc_tq, &sc->sc_tt, 0, e6000sw_tick, sc); taskqueue_start_threads(&sc->sc_tq, 1, PI_NET, "%s taskq", device_get_nameunit(dev)); if (ports == 0) { device_printf(dev, "failed to parse DTS: no ports found for " "switch\n"); E6000SW_UNLOCK(sc); return (ENXIO); } for (child = OF_child(ports); child != 0; child = OF_peer(child)) { err = e6000sw_parse_child_fdt(sc, child, &port); if (err != 0) { device_printf(sc->dev, "failed to parse DTS\n"); goto out_fail; } /* Port is in use. */ sc->ports_mask |= (1 << port); err = e6000sw_init_interface(sc, port); if (err != 0) { device_printf(sc->dev, "failed to init interface\n"); goto out_fail; } if (e6000sw_is_fixedport(sc, port)) { /* Link must be down to change speed force value. */ reg = e6000sw_readreg(sc, REG_PORT(sc, port), PSC_CONTROL); reg &= ~PSC_CONTROL_LINK_UP; reg |= PSC_CONTROL_FORCED_LINK; e6000sw_writereg(sc, REG_PORT(sc, port), PSC_CONTROL, reg); /* * Force speed, full-duplex, EEE off and flow-control * on. */ reg &= ~(PSC_CONTROL_SPD2500 | PSC_CONTROL_ALT_SPD | PSC_CONTROL_FORCED_FC | PSC_CONTROL_FC_ON | PSC_CONTROL_FORCED_EEE); if (e6000sw_is_fixed25port(sc, port)) reg |= PSC_CONTROL_SPD2500; else reg |= PSC_CONTROL_SPD1000; if (MVSWITCH(sc, MV88E6190) && e6000sw_is_fixed25port(sc, port)) reg |= PSC_CONTROL_ALT_SPD; reg |= PSC_CONTROL_FORCED_DPX | PSC_CONTROL_FULLDPX | PSC_CONTROL_FORCED_LINK | PSC_CONTROL_LINK_UP | PSC_CONTROL_FORCED_SPD; if (!MVSWITCH(sc, MV88E6190)) reg |= PSC_CONTROL_FORCED_FC | PSC_CONTROL_FC_ON; if (MVSWITCH(sc, MV88E6141) || MVSWITCH(sc, MV88E6341) || MVSWITCH(sc, MV88E6190)) reg |= PSC_CONTROL_FORCED_EEE; e6000sw_writereg(sc, REG_PORT(sc, port), PSC_CONTROL, reg); /* Power on the SERDES interfaces. */ if (MVSWITCH(sc, MV88E6190) && (port == 9 || port == 10)) { if (e6000sw_is_fixed25port(sc, port)) sgmii = false; else sgmii = true; e6000sw_serdes_power(sc->dev, port, sgmii); } } /* Don't attach miibus at CPU/fixed ports */ if (!e6000sw_is_phyport(sc, port)) continue; err = e6000sw_attach_miibus(sc, port); if (err != 0) { device_printf(sc->dev, "failed to attach miibus\n"); goto out_fail; } } etherswitch_info.es_nports = sc->num_ports; /* Default to port vlan. */ e6000sw_set_vlan_mode(sc, ETHERSWITCH_VLAN_PORT); reg = e6000sw_readreg(sc, REG_GLOBAL, SWITCH_GLOBAL_STATUS); if (reg & SWITCH_GLOBAL_STATUS_IR) device_printf(dev, "switch is ready.\n"); E6000SW_UNLOCK(sc); bus_generic_probe(dev); bus_generic_attach(dev); taskqueue_enqueue_timeout(sc->sc_tq, &sc->sc_tt, hz); return (0); out_fail: e6000sw_detach(dev); return (err); } static int e6000sw_waitready(e6000sw_softc_t *sc, uint32_t phy, uint32_t reg, uint32_t busybit) { int i; for (i = 0; i < E6000SW_RETRIES; i++) { if ((e6000sw_readreg(sc, phy, reg) & busybit) == 0) return (0); DELAY(1); } return (1); } /* XMDIO/Clause 45 access. */ static int e6000sw_read_xmdio(device_t dev, int phy, int devaddr, int devreg) { e6000sw_softc_t *sc; uint32_t reg; sc = device_get_softc(dev); E6000SW_LOCK_ASSERT(sc, SA_XLOCKED); if (E6000SW_WAITREADY2(sc, SMI_PHY_CMD_REG, SMI_CMD_BUSY)) { device_printf(dev, "Timeout while waiting for switch\n"); return (ETIMEDOUT); } reg = devaddr & SMI_CMD_REG_ADDR_MASK; reg |= (phy << SMI_CMD_DEV_ADDR) & SMI_CMD_DEV_ADDR_MASK; /* Load C45 register address. */ e6000sw_writereg(sc, REG_GLOBAL2, SMI_PHY_DATA_REG, devreg); e6000sw_writereg(sc, REG_GLOBAL2, SMI_PHY_CMD_REG, reg | SMI_CMD_OP_C45_ADDR); if (E6000SW_WAITREADY2(sc, SMI_PHY_CMD_REG, SMI_CMD_BUSY)) { device_printf(dev, "Timeout while waiting for switch\n"); return (ETIMEDOUT); } /* Start C45 read operation. */ e6000sw_writereg(sc, REG_GLOBAL2, SMI_PHY_CMD_REG, reg | SMI_CMD_OP_C45_READ); if (E6000SW_WAITREADY2(sc, SMI_PHY_CMD_REG, SMI_CMD_BUSY)) { device_printf(dev, "Timeout while waiting for switch\n"); return (ETIMEDOUT); } /* Read C45 data. */ reg = e6000sw_readreg(sc, REG_GLOBAL2, SMI_PHY_DATA_REG); return (reg & PHY_DATA_MASK); } static int e6000sw_write_xmdio(device_t dev, int phy, int devaddr, int devreg, int val) { e6000sw_softc_t *sc; uint32_t reg; sc = device_get_softc(dev); E6000SW_LOCK_ASSERT(sc, SA_XLOCKED); if (E6000SW_WAITREADY2(sc, SMI_PHY_CMD_REG, SMI_CMD_BUSY)) { device_printf(dev, "Timeout while waiting for switch\n"); return (ETIMEDOUT); } reg = devaddr & SMI_CMD_REG_ADDR_MASK; reg |= (phy << SMI_CMD_DEV_ADDR) & SMI_CMD_DEV_ADDR_MASK; /* Load C45 register address. */ e6000sw_writereg(sc, REG_GLOBAL2, SMI_PHY_DATA_REG, devreg); e6000sw_writereg(sc, REG_GLOBAL2, SMI_PHY_CMD_REG, reg | SMI_CMD_OP_C45_ADDR); if (E6000SW_WAITREADY2(sc, SMI_PHY_CMD_REG, SMI_CMD_BUSY)) { device_printf(dev, "Timeout while waiting for switch\n"); return (ETIMEDOUT); } /* Load data and start the C45 write operation. */ e6000sw_writereg(sc, REG_GLOBAL2, SMI_PHY_DATA_REG, devreg); e6000sw_writereg(sc, REG_GLOBAL2, SMI_PHY_CMD_REG, reg | SMI_CMD_OP_C45_WRITE); return (0); } static int e6000sw_readphy(device_t dev, int phy, int reg) { e6000sw_softc_t *sc; int ret; sc = device_get_softc(dev); E6000SW_LOCK_ASSERT(sc, SA_UNLOCKED); E6000SW_LOCK(sc); ret = e6000sw_readphy_locked(dev, phy, reg); E6000SW_UNLOCK(sc); return (ret); } /* * PHY registers are paged. Put page index in reg 22 (accessible from every * page), then access specific register. */ static int e6000sw_readphy_locked(device_t dev, int phy, int reg) { e6000sw_softc_t *sc; uint32_t val; sc = device_get_softc(dev); E6000SW_LOCK_ASSERT(sc, SA_XLOCKED); if (!e6000sw_is_phyport(sc, phy) || reg >= E6000SW_NUM_PHY_REGS) { device_printf(dev, "Wrong register address.\n"); return (EINVAL); } if (E6000SW_WAITREADY2(sc, SMI_PHY_CMD_REG, SMI_CMD_BUSY)) { device_printf(dev, "Timeout while waiting for switch\n"); return (ETIMEDOUT); } e6000sw_writereg(sc, REG_GLOBAL2, SMI_PHY_CMD_REG, SMI_CMD_OP_C22_READ | (reg & SMI_CMD_REG_ADDR_MASK) | ((phy << SMI_CMD_DEV_ADDR) & SMI_CMD_DEV_ADDR_MASK)); if (E6000SW_WAITREADY2(sc, SMI_PHY_CMD_REG, SMI_CMD_BUSY)) { device_printf(dev, "Timeout while waiting for switch\n"); return (ETIMEDOUT); } val = e6000sw_readreg(sc, REG_GLOBAL2, SMI_PHY_DATA_REG); return (val & PHY_DATA_MASK); } static int e6000sw_writephy(device_t dev, int phy, int reg, int data) { e6000sw_softc_t *sc; int ret; sc = device_get_softc(dev); E6000SW_LOCK_ASSERT(sc, SA_UNLOCKED); E6000SW_LOCK(sc); ret = e6000sw_writephy_locked(dev, phy, reg, data); E6000SW_UNLOCK(sc); return (ret); } static int e6000sw_writephy_locked(device_t dev, int phy, int reg, int data) { e6000sw_softc_t *sc; sc = device_get_softc(dev); E6000SW_LOCK_ASSERT(sc, SA_XLOCKED); if (!e6000sw_is_phyport(sc, phy) || reg >= E6000SW_NUM_PHY_REGS) { device_printf(dev, "Wrong register address.\n"); return (EINVAL); } if (E6000SW_WAITREADY2(sc, SMI_PHY_CMD_REG, SMI_CMD_BUSY)) { device_printf(dev, "Timeout while waiting for switch\n"); return (ETIMEDOUT); } e6000sw_writereg(sc, REG_GLOBAL2, SMI_PHY_DATA_REG, data & PHY_DATA_MASK); e6000sw_writereg(sc, REG_GLOBAL2, SMI_PHY_CMD_REG, SMI_CMD_OP_C22_WRITE | (reg & SMI_CMD_REG_ADDR_MASK) | ((phy << SMI_CMD_DEV_ADDR) & SMI_CMD_DEV_ADDR_MASK)); return (0); } static int e6000sw_detach(device_t dev) { int phy; e6000sw_softc_t *sc; sc = device_get_softc(dev); if (device_is_attached(dev)) taskqueue_drain_timeout(sc->sc_tq, &sc->sc_tt); if (sc->sc_tq != NULL) taskqueue_free(sc->sc_tq); device_delete_children(dev); sx_destroy(&sc->sx); for (phy = 0; phy < sc->num_ports; phy++) { if (sc->ifp[phy] != NULL) if_free(sc->ifp[phy]); if (sc->ifname[phy] != NULL) free(sc->ifname[phy], M_E6000SW); } return (0); } static etherswitch_info_t* e6000sw_getinfo(device_t dev) { return (ðerswitch_info); } static int e6000sw_getconf(device_t dev, etherswitch_conf_t *conf) { struct e6000sw_softc *sc; /* Return the VLAN mode. */ sc = device_get_softc(dev); conf->cmd = ETHERSWITCH_CONF_VLAN_MODE; conf->vlan_mode = sc->vlan_mode; return (0); } static int e6000sw_setconf(device_t dev, etherswitch_conf_t *conf) { struct e6000sw_softc *sc; /* Set the VLAN mode. */ sc = device_get_softc(dev); if (conf->cmd & ETHERSWITCH_CONF_VLAN_MODE) { E6000SW_LOCK(sc); e6000sw_set_vlan_mode(sc, conf->vlan_mode); E6000SW_UNLOCK(sc); } return (0); } static void e6000sw_lock(device_t dev) { struct e6000sw_softc *sc; sc = device_get_softc(dev); E6000SW_LOCK_ASSERT(sc, SA_UNLOCKED); E6000SW_LOCK(sc); } static void e6000sw_unlock(device_t dev) { struct e6000sw_softc *sc; sc = device_get_softc(dev); E6000SW_LOCK_ASSERT(sc, SA_XLOCKED); E6000SW_UNLOCK(sc); } static int e6000sw_getport(device_t dev, etherswitch_port_t *p) { struct mii_data *mii; int err; struct ifmediareq *ifmr; uint32_t reg; e6000sw_softc_t *sc = device_get_softc(dev); E6000SW_LOCK_ASSERT(sc, SA_UNLOCKED); if (p->es_port >= sc->num_ports || p->es_port < 0) return (EINVAL); if (!e6000sw_is_portenabled(sc, p->es_port)) return (0); E6000SW_LOCK(sc); e6000sw_get_pvid(sc, p->es_port, &p->es_pvid); /* Port flags. */ reg = e6000sw_readreg(sc, REG_PORT(sc, p->es_port), PORT_CONTROL2); if (reg & PORT_CONTROL2_DISC_TAGGED) p->es_flags |= ETHERSWITCH_PORT_DROPTAGGED; if (reg & PORT_CONTROL2_DISC_UNTAGGED) p->es_flags |= ETHERSWITCH_PORT_DROPUNTAGGED; err = 0; if (e6000sw_is_fixedport(sc, p->es_port)) { if (e6000sw_is_cpuport(sc, p->es_port)) p->es_flags |= ETHERSWITCH_PORT_CPU; ifmr = &p->es_ifmr; ifmr->ifm_status = IFM_ACTIVE | IFM_AVALID; ifmr->ifm_count = 0; if (e6000sw_is_fixed25port(sc, p->es_port)) ifmr->ifm_active = IFM_2500_T; else ifmr->ifm_active = IFM_1000_T; ifmr->ifm_active |= IFM_ETHER | IFM_FDX; ifmr->ifm_current = ifmr->ifm_active; ifmr->ifm_mask = 0; } else { mii = e6000sw_miiforphy(sc, p->es_port); err = ifmedia_ioctl(mii->mii_ifp, &p->es_ifr, &mii->mii_media, SIOCGIFMEDIA); } E6000SW_UNLOCK(sc); return (err); } static int e6000sw_setport(device_t dev, etherswitch_port_t *p) { e6000sw_softc_t *sc; int err; struct mii_data *mii; uint32_t reg; sc = device_get_softc(dev); E6000SW_LOCK_ASSERT(sc, SA_UNLOCKED); if (p->es_port >= sc->num_ports || p->es_port < 0) return (EINVAL); if (!e6000sw_is_portenabled(sc, p->es_port)) return (0); E6000SW_LOCK(sc); /* Port flags. */ reg = e6000sw_readreg(sc, REG_PORT(sc, p->es_port), PORT_CONTROL2); if (p->es_flags & ETHERSWITCH_PORT_DROPTAGGED) reg |= PORT_CONTROL2_DISC_TAGGED; else reg &= ~PORT_CONTROL2_DISC_TAGGED; if (p->es_flags & ETHERSWITCH_PORT_DROPUNTAGGED) reg |= PORT_CONTROL2_DISC_UNTAGGED; else reg &= ~PORT_CONTROL2_DISC_UNTAGGED; e6000sw_writereg(sc, REG_PORT(sc, p->es_port), PORT_CONTROL2, reg); err = 0; if (p->es_pvid != 0) e6000sw_set_pvid(sc, p->es_port, p->es_pvid); if (e6000sw_is_phyport(sc, p->es_port)) { mii = e6000sw_miiforphy(sc, p->es_port); err = ifmedia_ioctl(mii->mii_ifp, &p->es_ifr, &mii->mii_media, SIOCSIFMEDIA); } E6000SW_UNLOCK(sc); return (err); } static __inline void e6000sw_port_vlan_assign(e6000sw_softc_t *sc, int port, uint32_t fid, uint32_t members) { uint32_t reg; reg = e6000sw_readreg(sc, REG_PORT(sc, port), PORT_VLAN_MAP); reg &= ~(PORT_MASK(sc) | PORT_VLAN_MAP_FID_MASK); reg |= members & PORT_MASK(sc) & ~(1 << port); reg |= (fid << PORT_VLAN_MAP_FID) & PORT_VLAN_MAP_FID_MASK; e6000sw_writereg(sc, REG_PORT(sc, port), PORT_VLAN_MAP, reg); reg = e6000sw_readreg(sc, REG_PORT(sc, port), PORT_CONTROL1); reg &= ~PORT_CONTROL1_FID_MASK; reg |= (fid >> 4) & PORT_CONTROL1_FID_MASK; e6000sw_writereg(sc, REG_PORT(sc, port), PORT_CONTROL1, reg); } static int e6000sw_init_vlan(struct e6000sw_softc *sc) { int i, port, ret; uint32_t members; /* Disable all ports */ for (port = 0; port < sc->num_ports; port++) { ret = e6000sw_readreg(sc, REG_PORT(sc, port), PORT_CONTROL); e6000sw_writereg(sc, REG_PORT(sc, port), PORT_CONTROL, (ret & ~PORT_CONTROL_ENABLE)); } /* Flush VTU. */ e6000sw_vtu_flush(sc); for (port = 0; port < sc->num_ports; port++) { /* Reset the egress and frame mode. */ ret = e6000sw_readreg(sc, REG_PORT(sc, port), PORT_CONTROL); ret &= ~(PORT_CONTROL_EGRESS | PORT_CONTROL_FRAME); e6000sw_writereg(sc, REG_PORT(sc, port), PORT_CONTROL, ret); /* Set the 802.1q mode. */ ret = e6000sw_readreg(sc, REG_PORT(sc, port), PORT_CONTROL2); ret &= ~PORT_CONTROL2_DOT1Q; if (sc->vlan_mode == ETHERSWITCH_VLAN_DOT1Q) ret |= PORT_CONTROL2_DOT1Q; e6000sw_writereg(sc, REG_PORT(sc, port), PORT_CONTROL2, ret); } for (port = 0; port < sc->num_ports; port++) { if (!e6000sw_is_portenabled(sc, port)) continue; ret = e6000sw_readreg(sc, REG_PORT(sc, port), PORT_VID); /* Set port priority */ ret &= ~PORT_VID_PRIORITY_MASK; /* Set VID map */ ret &= ~PORT_VID_DEF_VID_MASK; if (sc->vlan_mode == ETHERSWITCH_VLAN_DOT1Q) ret |= 1; else ret |= (port + 1); e6000sw_writereg(sc, REG_PORT(sc, port), PORT_VID, ret); } /* Assign the member ports to each origin port. */ for (port = 0; port < sc->num_ports; port++) { members = 0; if (e6000sw_is_portenabled(sc, port)) { for (i = 0; i < sc->num_ports; i++) { if (i == port || !e6000sw_is_portenabled(sc, i)) continue; members |= (1 << i); } } /* Default to FID 0. */ e6000sw_port_vlan_assign(sc, port, 0, members); } /* Reset internal VLAN table. */ for (i = 0; i < nitems(sc->vlans); i++) sc->vlans[i] = 0; /* Create default VLAN (1). */ if (sc->vlan_mode == ETHERSWITCH_VLAN_DOT1Q) { sc->vlans[0] = 1; e6000sw_vtu_update(sc, 0, sc->vlans[0], 1, 0, sc->ports_mask); } /* Enable all ports */ for (port = 0; port < sc->num_ports; port++) { if (!e6000sw_is_portenabled(sc, port)) continue; ret = e6000sw_readreg(sc, REG_PORT(sc, port), PORT_CONTROL); e6000sw_writereg(sc, REG_PORT(sc, port), PORT_CONTROL, (ret | PORT_CONTROL_ENABLE)); } return (0); } static int e6000sw_set_vlan_mode(struct e6000sw_softc *sc, uint32_t mode) { E6000SW_LOCK_ASSERT(sc, SA_XLOCKED); switch (mode) { case ETHERSWITCH_VLAN_PORT: sc->vlan_mode = ETHERSWITCH_VLAN_PORT; etherswitch_info.es_nvlangroups = sc->num_ports; return (e6000sw_init_vlan(sc)); break; case ETHERSWITCH_VLAN_DOT1Q: sc->vlan_mode = ETHERSWITCH_VLAN_DOT1Q; etherswitch_info.es_nvlangroups = E6000SW_NUM_VLANS; return (e6000sw_init_vlan(sc)); break; default: return (EINVAL); } } /* * Registers in this switch are divided into sections, specified in * documentation. So as to access any of them, section index and reg index * is necessary. etherswitchcfg uses only one variable, so indexes were * compressed into addr_reg: 32 * section_index + reg_index. */ static int e6000sw_readreg_wrapper(device_t dev, int addr_reg) { e6000sw_softc_t *sc; sc = device_get_softc(dev); if ((addr_reg > (REG_GLOBAL2 * 32 + REG_NUM_MAX)) || (addr_reg < (REG_PORT(sc, 0) * 32))) { device_printf(dev, "Wrong register address.\n"); return (EINVAL); } return (e6000sw_readreg(device_get_softc(dev), addr_reg / 32, addr_reg % 32)); } static int e6000sw_writereg_wrapper(device_t dev, int addr_reg, int val) { e6000sw_softc_t *sc; sc = device_get_softc(dev); if ((addr_reg > (REG_GLOBAL2 * 32 + REG_NUM_MAX)) || (addr_reg < (REG_PORT(sc, 0) * 32))) { device_printf(dev, "Wrong register address.\n"); return (EINVAL); } e6000sw_writereg(device_get_softc(dev), addr_reg / 32, addr_reg % 32, val); return (0); } /* * setvgroup/getvgroup called from etherswitchfcg need to be locked, * while internal calls do not. */ static int e6000sw_setvgroup_wrapper(device_t dev, etherswitch_vlangroup_t *vg) { e6000sw_softc_t *sc; int ret; sc = device_get_softc(dev); E6000SW_LOCK_ASSERT(sc, SA_UNLOCKED); E6000SW_LOCK(sc); ret = e6000sw_setvgroup(dev, vg); E6000SW_UNLOCK(sc); return (ret); } static int e6000sw_getvgroup_wrapper(device_t dev, etherswitch_vlangroup_t *vg) { e6000sw_softc_t *sc; int ret; sc = device_get_softc(dev); E6000SW_LOCK_ASSERT(sc, SA_UNLOCKED); E6000SW_LOCK(sc); ret = e6000sw_getvgroup(dev, vg); E6000SW_UNLOCK(sc); return (ret); } static int e6000sw_set_port_vlan(e6000sw_softc_t *sc, etherswitch_vlangroup_t *vg) { uint32_t port; port = vg->es_vlangroup; if (port > sc->num_ports) return (EINVAL); if (vg->es_member_ports != vg->es_untagged_ports) { device_printf(sc->dev, "Tagged ports not supported.\n"); return (EINVAL); } e6000sw_port_vlan_assign(sc, port, 0, vg->es_untagged_ports); vg->es_vid = port | ETHERSWITCH_VID_VALID; return (0); } static int e6000sw_set_dot1q_vlan(e6000sw_softc_t *sc, etherswitch_vlangroup_t *vg) { int i, vlan; vlan = vg->es_vid & ETHERSWITCH_VID_MASK; /* Set VLAN to '0' removes it from table. */ if (vlan == 0) { e6000sw_vtu_update(sc, VTU_PURGE, sc->vlans[vg->es_vlangroup], 0, 0, 0); sc->vlans[vg->es_vlangroup] = 0; return (0); } /* Is this VLAN already in table ? */ for (i = 0; i < etherswitch_info.es_nvlangroups; i++) if (i != vg->es_vlangroup && vlan == sc->vlans[i]) return (EINVAL); sc->vlans[vg->es_vlangroup] = vlan; e6000sw_vtu_update(sc, 0, vlan, vg->es_vlangroup + 1, vg->es_member_ports & sc->ports_mask, vg->es_untagged_ports & sc->ports_mask); return (0); } static int e6000sw_setvgroup(device_t dev, etherswitch_vlangroup_t *vg) { e6000sw_softc_t *sc; sc = device_get_softc(dev); E6000SW_LOCK_ASSERT(sc, SA_XLOCKED); if (sc->vlan_mode == ETHERSWITCH_VLAN_PORT) return (e6000sw_set_port_vlan(sc, vg)); else if (sc->vlan_mode == ETHERSWITCH_VLAN_DOT1Q) return (e6000sw_set_dot1q_vlan(sc, vg)); return (EINVAL); } static int e6000sw_get_port_vlan(e6000sw_softc_t *sc, etherswitch_vlangroup_t *vg) { uint32_t port, reg; port = vg->es_vlangroup; if (port > sc->num_ports) return (EINVAL); if (!e6000sw_is_portenabled(sc, port)) { vg->es_vid = port; return (0); } reg = e6000sw_readreg(sc, REG_PORT(sc, port), PORT_VLAN_MAP); vg->es_untagged_ports = vg->es_member_ports = reg & PORT_MASK(sc); vg->es_vid = port | ETHERSWITCH_VID_VALID; vg->es_fid = (reg & PORT_VLAN_MAP_FID_MASK) >> PORT_VLAN_MAP_FID; reg = e6000sw_readreg(sc, REG_PORT(sc, port), PORT_CONTROL1); vg->es_fid |= (reg & PORT_CONTROL1_FID_MASK) << 4; return (0); } static int e6000sw_get_dot1q_vlan(e6000sw_softc_t *sc, etherswitch_vlangroup_t *vg) { int i, port; uint32_t reg; vg->es_fid = 0; vg->es_vid = sc->vlans[vg->es_vlangroup]; vg->es_untagged_ports = vg->es_member_ports = 0; if (vg->es_vid == 0) return (0); if (E6000SW_WAITREADY(sc, VTU_OPERATION, VTU_BUSY)) { device_printf(sc->dev, "VTU unit is busy, cannot access\n"); return (EBUSY); } e6000sw_writereg(sc, REG_GLOBAL, VTU_VID, vg->es_vid - 1); reg = e6000sw_readreg(sc, REG_GLOBAL, VTU_OPERATION); reg &= ~VTU_OP_MASK; reg |= VTU_GET_NEXT | VTU_BUSY; e6000sw_writereg(sc, REG_GLOBAL, VTU_OPERATION, reg); if (E6000SW_WAITREADY(sc, VTU_OPERATION, VTU_BUSY)) { device_printf(sc->dev, "Timeout while reading\n"); return (EBUSY); } reg = e6000sw_readreg(sc, REG_GLOBAL, VTU_VID); if (reg == VTU_VID_MASK || (reg & VTU_VID_VALID) == 0) return (EINVAL); if ((reg & VTU_VID_MASK) != vg->es_vid) return (EINVAL); vg->es_vid |= ETHERSWITCH_VID_VALID; reg = e6000sw_readreg(sc, REG_GLOBAL, VTU_DATA); for (i = 0; i < sc->num_ports; i++) { if (i == VTU_PPREG(sc)) reg = e6000sw_readreg(sc, REG_GLOBAL, VTU_DATA2); port = (reg >> VTU_PORT(sc, i)) & VTU_PORT_MASK; if (port == VTU_PORT_UNTAGGED) { vg->es_untagged_ports |= (1 << i); vg->es_member_ports |= (1 << i); } else if (port == VTU_PORT_TAGGED) vg->es_member_ports |= (1 << i); } return (0); } static int e6000sw_getvgroup(device_t dev, etherswitch_vlangroup_t *vg) { e6000sw_softc_t *sc; sc = device_get_softc(dev); E6000SW_LOCK_ASSERT(sc, SA_XLOCKED); if (sc->vlan_mode == ETHERSWITCH_VLAN_PORT) return (e6000sw_get_port_vlan(sc, vg)); else if (sc->vlan_mode == ETHERSWITCH_VLAN_DOT1Q) return (e6000sw_get_dot1q_vlan(sc, vg)); return (EINVAL); } static __inline struct mii_data* e6000sw_miiforphy(e6000sw_softc_t *sc, unsigned int phy) { if (!e6000sw_is_phyport(sc, phy)) return (NULL); return (device_get_softc(sc->miibus[phy])); } static int e6000sw_ifmedia_upd(if_t ifp) { e6000sw_softc_t *sc; struct mii_data *mii; sc = if_getsoftc(ifp); mii = e6000sw_miiforphy(sc, if_getdunit(ifp)); if (mii == NULL) return (ENXIO); mii_mediachg(mii); return (0); } static void e6000sw_ifmedia_sts(if_t ifp, struct ifmediareq *ifmr) { e6000sw_softc_t *sc; struct mii_data *mii; sc = if_getsoftc(ifp); mii = e6000sw_miiforphy(sc, if_getdunit(ifp)); if (mii == NULL) return; mii_pollstat(mii); ifmr->ifm_active = mii->mii_media_active; ifmr->ifm_status = mii->mii_media_status; } static int e6000sw_smi_waitready(e6000sw_softc_t *sc, int phy) { int i; for (i = 0; i < E6000SW_SMI_TIMEOUT; i++) { if ((MDIO_READ(sc->dev, phy, SMI_CMD) & SMI_CMD_BUSY) == 0) return (0); DELAY(1); } return (1); } static __inline uint32_t e6000sw_readreg(e6000sw_softc_t *sc, int addr, int reg) { E6000SW_LOCK_ASSERT(sc, SA_XLOCKED); if (!MVSWITCH_MULTICHIP(sc)) return (MDIO_READ(sc->dev, addr, reg) & 0xffff); if (e6000sw_smi_waitready(sc, sc->sw_addr)) { printf("e6000sw: readreg timeout\n"); return (0xffff); } MDIO_WRITE(sc->dev, sc->sw_addr, SMI_CMD, SMI_CMD_OP_C22_READ | (reg & SMI_CMD_REG_ADDR_MASK) | ((addr << SMI_CMD_DEV_ADDR) & SMI_CMD_DEV_ADDR_MASK)); if (e6000sw_smi_waitready(sc, sc->sw_addr)) { printf("e6000sw: readreg timeout\n"); return (0xffff); } return (MDIO_READ(sc->dev, sc->sw_addr, SMI_DATA) & 0xffff); } static __inline void e6000sw_writereg(e6000sw_softc_t *sc, int addr, int reg, int val) { E6000SW_LOCK_ASSERT(sc, SA_XLOCKED); if (!MVSWITCH_MULTICHIP(sc)) { MDIO_WRITE(sc->dev, addr, reg, val); return; } if (e6000sw_smi_waitready(sc, sc->sw_addr)) { printf("e6000sw: readreg timeout\n"); return; } MDIO_WRITE(sc->dev, sc->sw_addr, SMI_DATA, val); MDIO_WRITE(sc->dev, sc->sw_addr, SMI_CMD, SMI_CMD_OP_C22_WRITE | (reg & SMI_CMD_REG_ADDR_MASK) | ((addr << SMI_CMD_DEV_ADDR) & SMI_CMD_DEV_ADDR_MASK)); } static __inline bool e6000sw_is_cpuport(e6000sw_softc_t *sc, int port) { return ((sc->cpuports_mask & (1 << port)) ? true : false); } static __inline bool e6000sw_is_fixedport(e6000sw_softc_t *sc, int port) { return ((sc->fixed_mask & (1 << port)) ? true : false); } static __inline bool e6000sw_is_fixed25port(e6000sw_softc_t *sc, int port) { return ((sc->fixed25_mask & (1 << port)) ? true : false); } static __inline bool e6000sw_is_phyport(e6000sw_softc_t *sc, int port) { uint32_t phy_mask; phy_mask = ~(sc->fixed_mask | sc->cpuports_mask); return ((phy_mask & (1 << port)) ? true : false); } static __inline bool e6000sw_is_portenabled(e6000sw_softc_t *sc, int port) { return ((sc->ports_mask & (1 << port)) ? true : false); } static __inline void e6000sw_set_pvid(e6000sw_softc_t *sc, int port, int pvid) { uint32_t reg; reg = e6000sw_readreg(sc, REG_PORT(sc, port), PORT_VID); reg &= ~PORT_VID_DEF_VID_MASK; reg |= (pvid & PORT_VID_DEF_VID_MASK); e6000sw_writereg(sc, REG_PORT(sc, port), PORT_VID, reg); } static __inline int e6000sw_get_pvid(e6000sw_softc_t *sc, int port, int *pvid) { if (pvid == NULL) return (ENXIO); *pvid = e6000sw_readreg(sc, REG_PORT(sc, port), PORT_VID) & PORT_VID_DEF_VID_MASK; return (0); } /* * Convert port status to ifmedia. */ static void e6000sw_update_ifmedia(uint16_t portstatus, u_int *media_status, u_int *media_active) { *media_active = IFM_ETHER; *media_status = IFM_AVALID; if ((portstatus & PORT_STATUS_LINK_MASK) != 0) *media_status |= IFM_ACTIVE; else { *media_active |= IFM_NONE; return; } switch (portstatus & PORT_STATUS_SPEED_MASK) { case PORT_STATUS_SPEED_10: *media_active |= IFM_10_T; break; case PORT_STATUS_SPEED_100: *media_active |= IFM_100_TX; break; case PORT_STATUS_SPEED_1000: *media_active |= IFM_1000_T; break; } if ((portstatus & PORT_STATUS_DUPLEX_MASK) == 0) *media_active |= IFM_FDX; else *media_active |= IFM_HDX; } static void e6000sw_tick(void *arg, int p __unused) { e6000sw_softc_t *sc; struct mii_data *mii; struct mii_softc *miisc; uint16_t portstatus; int port; sc = arg; E6000SW_LOCK_ASSERT(sc, SA_UNLOCKED); E6000SW_LOCK(sc); for (port = 0; port < sc->num_ports; port++) { /* Tick only on PHY ports */ if (!e6000sw_is_portenabled(sc, port) || !e6000sw_is_phyport(sc, port)) continue; mii = e6000sw_miiforphy(sc, port); if (mii == NULL) continue; portstatus = e6000sw_readreg(sc, REG_PORT(sc, port), PORT_STATUS); e6000sw_update_ifmedia(portstatus, &mii->mii_media_status, &mii->mii_media_active); LIST_FOREACH(miisc, &mii->mii_phys, mii_list) { if (IFM_INST(mii->mii_media.ifm_cur->ifm_media) != miisc->mii_inst) continue; mii_phy_update(miisc, MII_POLLSTAT); } } E6000SW_UNLOCK(sc); } static void e6000sw_setup(device_t dev, e6000sw_softc_t *sc) { uint32_t atu_ctrl; /* Set aging time. */ atu_ctrl = e6000sw_readreg(sc, REG_GLOBAL, ATU_CONTROL); atu_ctrl &= ~ATU_CONTROL_AGETIME_MASK; atu_ctrl |= E6000SW_DEFAULT_AGETIME << ATU_CONTROL_AGETIME; e6000sw_writereg(sc, REG_GLOBAL, ATU_CONTROL, atu_ctrl); /* Send all with specific mac address to cpu port */ e6000sw_writereg(sc, REG_GLOBAL2, MGMT_EN_2x, MGMT_EN_ALL); e6000sw_writereg(sc, REG_GLOBAL2, MGMT_EN_0x, MGMT_EN_ALL); /* Disable Remote Management */ e6000sw_writereg(sc, REG_GLOBAL, SWITCH_GLOBAL_CONTROL2, 0); /* Disable loopback filter and flow control messages */ e6000sw_writereg(sc, REG_GLOBAL2, SWITCH_MGMT, SWITCH_MGMT_PRI_MASK | (1 << SWITCH_MGMT_RSVD2CPU) | SWITCH_MGMT_FC_PRI_MASK | (1 << SWITCH_MGMT_FORCEFLOW)); e6000sw_atu_flush(dev, sc, NO_OPERATION); e6000sw_atu_mac_table(dev, sc, NULL, NO_OPERATION); e6000sw_set_atustat(dev, sc, 0, COUNT_ALL); } static void e6000sw_set_atustat(device_t dev, e6000sw_softc_t *sc, int bin, int flag) { e6000sw_readreg(sc, REG_GLOBAL2, ATU_STATS); e6000sw_writereg(sc, REG_GLOBAL2, ATU_STATS, (bin << ATU_STATS_BIN ) | (flag << ATU_STATS_FLAG)); } static int e6000sw_atu_mac_table(device_t dev, e6000sw_softc_t *sc, struct atu_opt *atu, int flag) { uint16_t ret_opt; uint16_t ret_data; if (flag == NO_OPERATION) return (0); else if ((flag & (LOAD_FROM_FIB | PURGE_FROM_FIB | GET_NEXT_IN_FIB | GET_VIOLATION_DATA | CLEAR_VIOLATION_DATA)) == 0) { device_printf(dev, "Wrong Opcode for ATU operation\n"); return (EINVAL); } if (E6000SW_WAITREADY(sc, ATU_OPERATION, ATU_UNIT_BUSY)) { device_printf(dev, "ATU unit is busy, cannot access\n"); return (EBUSY); } ret_opt = e6000sw_readreg(sc, REG_GLOBAL, ATU_OPERATION); if (flag & LOAD_FROM_FIB) { ret_data = e6000sw_readreg(sc, REG_GLOBAL, ATU_DATA); e6000sw_writereg(sc, REG_GLOBAL2, ATU_DATA, (ret_data & ~ENTRY_STATE)); } e6000sw_writereg(sc, REG_GLOBAL, ATU_MAC_ADDR01, atu->mac_01); e6000sw_writereg(sc, REG_GLOBAL, ATU_MAC_ADDR23, atu->mac_23); e6000sw_writereg(sc, REG_GLOBAL, ATU_MAC_ADDR45, atu->mac_45); e6000sw_writereg(sc, REG_GLOBAL, ATU_FID, atu->fid); e6000sw_writereg(sc, REG_GLOBAL, ATU_OPERATION, (ret_opt | ATU_UNIT_BUSY | flag)); if (E6000SW_WAITREADY(sc, ATU_OPERATION, ATU_UNIT_BUSY)) device_printf(dev, "Timeout while waiting ATU\n"); else if (flag & GET_NEXT_IN_FIB) { atu->mac_01 = e6000sw_readreg(sc, REG_GLOBAL, ATU_MAC_ADDR01); atu->mac_23 = e6000sw_readreg(sc, REG_GLOBAL, ATU_MAC_ADDR23); atu->mac_45 = e6000sw_readreg(sc, REG_GLOBAL, ATU_MAC_ADDR45); } return (0); } static int e6000sw_atu_flush(device_t dev, e6000sw_softc_t *sc, int flag) { uint32_t reg; if (flag == NO_OPERATION) return (0); if (E6000SW_WAITREADY(sc, ATU_OPERATION, ATU_UNIT_BUSY)) { device_printf(dev, "ATU unit is busy, cannot access\n"); return (EBUSY); } reg = e6000sw_readreg(sc, REG_GLOBAL, ATU_OPERATION); e6000sw_writereg(sc, REG_GLOBAL, ATU_OPERATION, (reg | ATU_UNIT_BUSY | flag)); if (E6000SW_WAITREADY(sc, ATU_OPERATION, ATU_UNIT_BUSY)) device_printf(dev, "Timeout while flushing ATU\n"); return (0); } static int e6000sw_vtu_flush(e6000sw_softc_t *sc) { if (E6000SW_WAITREADY(sc, VTU_OPERATION, VTU_BUSY)) { device_printf(sc->dev, "VTU unit is busy, cannot access\n"); return (EBUSY); } e6000sw_writereg(sc, REG_GLOBAL, VTU_OPERATION, VTU_FLUSH | VTU_BUSY); if (E6000SW_WAITREADY(sc, VTU_OPERATION, VTU_BUSY)) { device_printf(sc->dev, "Timeout while flushing VTU\n"); return (ETIMEDOUT); } return (0); } static int e6000sw_vtu_update(e6000sw_softc_t *sc, int purge, int vid, int fid, int members, int untagged) { int i, op; uint32_t data[2]; if (E6000SW_WAITREADY(sc, VTU_OPERATION, VTU_BUSY)) { device_printf(sc->dev, "VTU unit is busy, cannot access\n"); return (EBUSY); } *data = (vid & VTU_VID_MASK); if (purge == 0) *data |= VTU_VID_VALID; e6000sw_writereg(sc, REG_GLOBAL, VTU_VID, *data); if (purge == 0) { data[0] = 0; data[1] = 0; for (i = 0; i < sc->num_ports; i++) { if ((untagged & (1 << i)) != 0) data[i / VTU_PPREG(sc)] |= VTU_PORT_UNTAGGED << VTU_PORT(sc, i); else if ((members & (1 << i)) != 0) data[i / VTU_PPREG(sc)] |= VTU_PORT_TAGGED << VTU_PORT(sc, i); else data[i / VTU_PPREG(sc)] |= VTU_PORT_DISCARD << VTU_PORT(sc, i); } e6000sw_writereg(sc, REG_GLOBAL, VTU_DATA, data[0]); e6000sw_writereg(sc, REG_GLOBAL, VTU_DATA2, data[1]); e6000sw_writereg(sc, REG_GLOBAL, VTU_FID, fid & VTU_FID_MASK(sc)); op = VTU_LOAD; } else op = VTU_PURGE; e6000sw_writereg(sc, REG_GLOBAL, VTU_OPERATION, op | VTU_BUSY); if (E6000SW_WAITREADY(sc, VTU_OPERATION, VTU_BUSY)) { device_printf(sc->dev, "Timeout while flushing VTU\n"); return (ETIMEDOUT); } return (0); }