/*- * SPDX-License-Identifier: BSD-2-Clause * * Copyright (c) 2016 Nicole Graziano * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /*$FreeBSD$*/ #include "opt_ddb.h" #include "opt_inet.h" #include "opt_inet6.h" #include "opt_rss.h" #ifdef HAVE_KERNEL_OPTION_HEADERS #include "opt_device_polling.h" #endif #include #include #ifdef DDB #include #include #endif #if __FreeBSD_version >= 800000 #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef RSS #include #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include "e1000_api.h" #include "e1000_82571.h" #include "ifdi_if.h" #ifndef _EM_H_DEFINED_ #define _EM_H_DEFINED_ /* Tunables */ /* * EM_MAX_TXD: Maximum number of Transmit Descriptors * Valid Range: 80-256 for 82542 and 82543-based adapters * 80-4096 for others * Default Value: 1024 * This value is the number of transmit descriptors allocated by the driver. * Increasing this value allows the driver to queue more transmits. Each * descriptor is 16 bytes. * Since TDLEN should be multiple of 128bytes, the number of transmit * desscriptors should meet the following condition. * (num_tx_desc * sizeof(struct e1000_tx_desc)) % 128 == 0 */ #define EM_MIN_TXD 128 #define EM_MAX_TXD 4096 #define EM_DEFAULT_TXD 1024 #define EM_DEFAULT_MULTI_TXD 4096 #define IGB_MAX_TXD 4096 /* * EM_MAX_RXD - Maximum number of receive Descriptors * Valid Range: 80-256 for 82542 and 82543-based adapters * 80-4096 for others * Default Value: 1024 * This value is the number of receive descriptors allocated by the driver. * Increasing this value allows the driver to buffer more incoming packets. * Each descriptor is 16 bytes. A receive buffer is also allocated for each * descriptor. The maximum MTU size is 16110. * Since TDLEN should be multiple of 128bytes, the number of transmit * desscriptors should meet the following condition. * (num_tx_desc * sizeof(struct e1000_tx_desc)) % 128 == 0 */ #define EM_MIN_RXD 128 #define EM_MAX_RXD 4096 #define EM_DEFAULT_RXD 1024 #define EM_DEFAULT_MULTI_RXD 4096 #define IGB_MAX_RXD 4096 /* * EM_TIDV - Transmit Interrupt Delay Value * Valid Range: 0-65535 (0=off) * Default Value: 64 * This value delays the generation of transmit interrupts in units of * 1.024 microseconds. Transmit interrupt reduction can improve CPU * efficiency if properly tuned for specific network traffic. If the * system is reporting dropped transmits, this value may be set too high * causing the driver to run out of available transmit descriptors. */ #define EM_TIDV 64 /* * EM_TADV - Transmit Absolute Interrupt Delay Value * (Not valid for 82542/82543/82544) * Valid Range: 0-65535 (0=off) * Default Value: 64 * This value, in units of 1.024 microseconds, limits the delay in which a * transmit interrupt is generated. Useful only if EM_TIDV is non-zero, * this value ensures that an interrupt is generated after the initial * packet is sent on the wire within the set amount of time. Proper tuning, * along with EM_TIDV, may improve traffic throughput in specific * network conditions. */ #define EM_TADV 64 /* * EM_RDTR - Receive Interrupt Delay Timer (Packet Timer) * Valid Range: 0-65535 (0=off) * Default Value: 0 * This value delays the generation of receive interrupts in units of 1.024 * microseconds. Receive interrupt reduction can improve CPU efficiency if * properly tuned for specific network traffic. Increasing this value adds * extra latency to frame reception and can end up decreasing the throughput * of TCP traffic. If the system is reporting dropped receives, this value * may be set too high, causing the driver to run out of available receive * descriptors. * * CAUTION: When setting EM_RDTR to a value other than 0, adapters * may hang (stop transmitting) under certain network conditions. * If this occurs a WATCHDOG message is logged in the system * event log. In addition, the controller is automatically reset, * restoring the network connection. To eliminate the potential * for the hang ensure that EM_RDTR is set to 0. */ #define EM_RDTR 0 /* * Receive Interrupt Absolute Delay Timer (Not valid for 82542/82543/82544) * Valid Range: 0-65535 (0=off) * Default Value: 64 * This value, in units of 1.024 microseconds, limits the delay in which a * receive interrupt is generated. Useful only if EM_RDTR is non-zero, * this value ensures that an interrupt is generated after the initial * packet is received within the set amount of time. Proper tuning, * along with EM_RDTR, may improve traffic throughput in specific network * conditions. */ #define EM_RADV 64 /* * This parameter controls whether or not autonegotation is enabled. * 0 - Disable autonegotiation * 1 - Enable autonegotiation */ #define DO_AUTO_NEG 1 /* * This parameter control whether or not the driver will wait for * autonegotiation to complete. * 1 - Wait for autonegotiation to complete * 0 - Don't wait for autonegotiation to complete */ #define WAIT_FOR_AUTO_NEG_DEFAULT 0 /* Tunables -- End */ #define AUTONEG_ADV_DEFAULT (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \ ADVERTISE_100_HALF | ADVERTISE_100_FULL | \ ADVERTISE_1000_FULL) #define AUTO_ALL_MODES 0 /* PHY master/slave setting */ #define EM_MASTER_SLAVE e1000_ms_hw_default /* * Micellaneous constants */ #define EM_VENDOR_ID 0x8086 #define EM_FLASH 0x0014 #define EM_JUMBO_PBA 0x00000028 #define EM_DEFAULT_PBA 0x00000030 #define EM_SMARTSPEED_DOWNSHIFT 3 #define EM_SMARTSPEED_MAX 15 #define EM_MAX_LOOP 10 #define MAX_NUM_MULTICAST_ADDRESSES 128 #define PCI_ANY_ID (~0U) #define ETHER_ALIGN 2 #define EM_FC_PAUSE_TIME 0x0680 #define EM_EEPROM_APME 0x400; #define EM_82544_APME 0x0004; /* Support AutoMediaDetect for Marvell M88 PHY in i354 */ #define IGB_MEDIA_RESET (1 << 0) /* Define the starting Interrupt rate per Queue */ #define IGB_INTS_PER_SEC 8000 #define IGB_DEFAULT_ITR ((1000000/IGB_INTS_PER_SEC) << 2) #define IGB_LINK_ITR 2000 #define I210_LINK_DELAY 1000 #define IGB_TXPBSIZE 20408 #define IGB_HDR_BUF 128 #define IGB_PKTTYPE_MASK 0x0000FFF0 #define IGB_DMCTLX_DCFLUSH_DIS 0x80000000 /* Disable DMA Coalesce Flush */ /* * Driver state logic for the detection of a hung state * in hardware. Set TX_HUNG whenever a TX packet is used * (data is sent) and clear it when txeof() is invoked if * any descriptors from the ring are cleaned/reclaimed. * Increment internal counter if no descriptors are cleaned * and compare to TX_MAXTRIES. When counter > TX_MAXTRIES, * reset adapter. */ #define EM_TX_IDLE 0x00000000 #define EM_TX_BUSY 0x00000001 #define EM_TX_HUNG 0x80000000 #define EM_TX_MAXTRIES 10 #define PCICFG_DESC_RING_STATUS 0xe4 #define FLUSH_DESC_REQUIRED 0x100 #define IGB_RX_PTHRESH ((hw->mac.type == e1000_i354) ? 12 : \ ((hw->mac.type <= e1000_82576) ? 16 : 8)) #define IGB_RX_HTHRESH 8 #define IGB_RX_WTHRESH ((hw->mac.type == e1000_82576 && \ (adapter->intr_type == IFLIB_INTR_MSIX)) ? 1 : 4) #define IGB_TX_PTHRESH ((hw->mac.type == e1000_i354) ? 20 : 8) #define IGB_TX_HTHRESH 1 #define IGB_TX_WTHRESH ((hw->mac.type != e1000_82575 && \ (adapter->intr_type == IFLIB_INTR_MSIX) ? 1 : 16) /* * TDBA/RDBA should be aligned on 16 byte boundary. But TDLEN/RDLEN should be * multiple of 128 bytes. So we align TDBA/RDBA on 128 byte boundary. This will * also optimize cache line size effect. H/W supports up to cache line size 128. */ #define EM_DBA_ALIGN 128 /* * See Intel 82574 Driver Programming Interface Manual, Section 10.2.6.9 */ #define TARC_COMPENSATION_MODE (1 << 7) /* Compensation Mode */ #define TARC_SPEED_MODE_BIT (1 << 21) /* On PCI-E MACs only */ #define TARC_MQ_FIX (1 << 23) | \ (1 << 24) | \ (1 << 25) /* Handle errata in MQ mode */ #define TARC_ERRATA_BIT (1 << 26) /* Note from errata on 82574 */ /* PCI Config defines */ #define EM_BAR_TYPE(v) ((v) & EM_BAR_TYPE_MASK) #define EM_BAR_TYPE_MASK 0x00000001 #define EM_BAR_TYPE_MMEM 0x00000000 #define EM_BAR_TYPE_IO 0x00000001 #define EM_BAR_TYPE_FLASH 0x0014 #define EM_BAR_MEM_TYPE(v) ((v) & EM_BAR_MEM_TYPE_MASK) #define EM_BAR_MEM_TYPE_MASK 0x00000006 #define EM_BAR_MEM_TYPE_32BIT 0x00000000 #define EM_BAR_MEM_TYPE_64BIT 0x00000004 /* More backward compatibility */ #if __FreeBSD_version < 900000 #define SYSCTL_ADD_UQUAD SYSCTL_ADD_QUAD #endif /* Defines for printing debug information */ #define DEBUG_INIT 0 #define DEBUG_IOCTL 0 #define DEBUG_HW 0 #define INIT_DEBUGOUT(S) if (DEBUG_INIT) printf(S "\n") #define INIT_DEBUGOUT1(S, A) if (DEBUG_INIT) printf(S "\n", A) #define INIT_DEBUGOUT2(S, A, B) if (DEBUG_INIT) printf(S "\n", A, B) #define IOCTL_DEBUGOUT(S) if (DEBUG_IOCTL) printf(S "\n") #define IOCTL_DEBUGOUT1(S, A) if (DEBUG_IOCTL) printf(S "\n", A) #define IOCTL_DEBUGOUT2(S, A, B) if (DEBUG_IOCTL) printf(S "\n", A, B) #define HW_DEBUGOUT(S) if (DEBUG_HW) printf(S "\n") #define HW_DEBUGOUT1(S, A) if (DEBUG_HW) printf(S "\n", A) #define HW_DEBUGOUT2(S, A, B) if (DEBUG_HW) printf(S "\n", A, B) #define EM_MAX_SCATTER 40 #define EM_VFTA_SIZE 128 #define EM_TSO_SIZE 65535 #define EM_TSO_SEG_SIZE 4096 /* Max dma segment size */ #define ETH_ZLEN 60 #define EM_CSUM_OFFLOAD (CSUM_IP | CSUM_IP_UDP | CSUM_IP_TCP) /* Offload bits in mbuf flag */ #define IGB_CSUM_OFFLOAD (CSUM_IP | CSUM_IP_UDP | CSUM_IP_TCP | \ CSUM_IP_SCTP | CSUM_IP6_UDP | CSUM_IP6_TCP | \ CSUM_IP6_SCTP) /* Offload bits in mbuf flag */ #define IGB_PKTTYPE_MASK 0x0000FFF0 #define IGB_DMCTLX_DCFLUSH_DIS 0x80000000 /* Disable DMA Coalesce Flush */ /* * 82574 has a nonstandard address for EIAC * and since its only used in MSI-X, and in * the em driver only 82574 uses MSI-X we can * solve it just using this define. */ #define EM_EIAC 0x000DC /* * 82574 only reports 3 MSI-X vectors by default; * defines assisting with making it report 5 are * located here. */ #define EM_NVM_PCIE_CTRL 0x1B #define EM_NVM_MSIX_N_MASK (0x7 << EM_NVM_MSIX_N_SHIFT) #define EM_NVM_MSIX_N_SHIFT 7 struct adapter; struct em_int_delay_info { struct adapter *adapter; /* Back-pointer to the adapter struct */ int offset; /* Register offset to read/write */ int value; /* Current value in usecs */ }; /* * The transmit ring, one per tx queue */ struct tx_ring { struct adapter *adapter; struct e1000_tx_desc *tx_base; uint64_t tx_paddr; qidx_t *tx_rsq; bool tx_tso; /* last tx was tso */ uint8_t me; qidx_t tx_rs_cidx; qidx_t tx_rs_pidx; qidx_t tx_cidx_processed; /* Interrupt resources */ void *tag; struct resource *res; unsigned long tx_irq; /* Saved csum offloading context information */ int csum_flags; int csum_lhlen; int csum_iphlen; int csum_thlen; int csum_mss; int csum_pktlen; uint32_t csum_txd_upper; uint32_t csum_txd_lower; /* last field */ }; /* * The Receive ring, one per rx queue */ struct rx_ring { struct adapter *adapter; struct em_rx_queue *que; u32 me; u32 payload; union e1000_rx_desc_extended *rx_base; uint64_t rx_paddr; /* Interrupt resources */ void *tag; struct resource *res; bool discard; /* Soft stats */ unsigned long rx_irq; unsigned long rx_discarded; unsigned long rx_packets; unsigned long rx_bytes; }; struct em_tx_queue { struct adapter *adapter; u32 msix; u32 eims; /* This queue's EIMS bit */ u32 me; struct tx_ring txr; }; struct em_rx_queue { struct adapter *adapter; u32 me; u32 msix; u32 eims; struct rx_ring rxr; u64 irqs; struct if_irq que_irq; }; /* Our adapter structure */ struct adapter { struct ifnet *ifp; struct e1000_hw hw; if_softc_ctx_t shared; if_ctx_t ctx; #define tx_num_queues shared->isc_ntxqsets #define rx_num_queues shared->isc_nrxqsets #define intr_type shared->isc_intr /* FreeBSD operating-system-specific structures. */ struct e1000_osdep osdep; device_t dev; struct cdev *led_dev; struct em_tx_queue *tx_queues; struct em_rx_queue *rx_queues; struct if_irq irq; struct resource *memory; struct resource *flash; struct resource *ioport; struct resource *res; void *tag; u32 linkvec; u32 ivars; struct ifmedia *media; int msix; int if_flags; int em_insert_vlan_header; u32 ims; bool in_detach; u32 flags; /* Task for FAST handling */ struct grouptask link_task; u16 num_vlans; u32 txd_cmd; u32 tx_process_limit; u32 rx_process_limit; u32 rx_mbuf_sz; /* Management and WOL features */ u32 wol; bool has_manage; bool has_amt; /* Multicast array memory */ u8 *mta; /* ** Shadow VFTA table, this is needed because ** the real vlan filter table gets cleared during ** a soft reset and the driver needs to be able ** to repopulate it. */ u32 shadow_vfta[EM_VFTA_SIZE]; /* Info about the interface */ u16 link_active; u16 fc; u16 link_speed; u16 link_duplex; u32 smartspeed; u32 dmac; int link_mask; u64 que_mask; struct em_int_delay_info tx_int_delay; struct em_int_delay_info tx_abs_int_delay; struct em_int_delay_info rx_int_delay; struct em_int_delay_info rx_abs_int_delay; struct em_int_delay_info tx_itr; /* Misc stats maintained by the driver */ unsigned long dropped_pkts; unsigned long link_irq; unsigned long rx_overruns; unsigned long watchdog_events; struct e1000_hw_stats stats; u16 vf_ifp; }; /******************************************************************************** * vendor_info_array * * This array contains the list of Subvendor/Subdevice IDs on which the driver * should load. * ********************************************************************************/ typedef struct _em_vendor_info_t { unsigned int vendor_id; unsigned int device_id; unsigned int subvendor_id; unsigned int subdevice_id; unsigned int index; } em_vendor_info_t; void em_dump_rs(struct adapter *); #define EM_RSSRK_SIZE 4 #define EM_RSSRK_VAL(key, i) (key[(i) * EM_RSSRK_SIZE] | \ key[(i) * EM_RSSRK_SIZE + 1] << 8 | \ key[(i) * EM_RSSRK_SIZE + 2] << 16 | \ key[(i) * EM_RSSRK_SIZE + 3] << 24) #endif /* _EM_H_DEFINED_ */