/*- * SPDX-License-Identifier: ISC * * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting * Copyright (c) 2002-2008 Atheros Communications, Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #include "opt_ah.h" #include "ah.h" #include "ah_internal.h" #include "ah_devid.h" #include "ah_eeprom_v14.h" #include "ah_eeprom_9287.h" #include "ar5416/ar5416.h" #include "ar5416/ar5416reg.h" #include "ar5416/ar5416phy.h" #include "ar9002/ar9287phy.h" #include "ar9002/ar9287an.h" #include "ar9002/ar9287_olc.h" #include "ar9002/ar9287_reset.h" /* * Set the TX power calibration table per-chain. * * This only supports open-loop TX power control for the AR9287. */ static void ar9287SetPowerCalTable(struct ath_hal *ah, const struct ieee80211_channel *chan, int16_t *pTxPowerIndexOffset) { struct cal_data_op_loop_ar9287 *pRawDatasetOpenLoop; uint8_t *pCalBChans = NULL; uint16_t pdGainOverlap_t2; uint16_t numPiers = 0, i; uint16_t numXpdGain, xpdMask; uint16_t xpdGainValues[AR5416_NUM_PD_GAINS] = {0, 0, 0, 0}; uint32_t regChainOffset; HAL_EEPROM_9287 *ee = AH_PRIVATE(ah)->ah_eeprom; struct ar9287_eeprom *pEepData = &ee->ee_base; xpdMask = pEepData->modalHeader.xpdGain; if ((pEepData->baseEepHeader.version & AR9287_EEP_VER_MINOR_MASK) >= AR9287_EEP_MINOR_VER_2) pdGainOverlap_t2 = pEepData->modalHeader.pdGainOverlap; else pdGainOverlap_t2 = (uint16_t)(MS(OS_REG_READ(ah, AR_PHY_TPCRG5), AR_PHY_TPCRG5_PD_GAIN_OVERLAP)); /* Note: Kiwi should only be 2ghz.. */ if (IEEE80211_IS_CHAN_2GHZ(chan)) { pCalBChans = pEepData->calFreqPier2G; numPiers = AR9287_NUM_2G_CAL_PIERS; pRawDatasetOpenLoop = (struct cal_data_op_loop_ar9287 *)pEepData->calPierData2G[0]; AH5416(ah)->initPDADC = pRawDatasetOpenLoop->vpdPdg[0][0]; } numXpdGain = 0; /* Calculate the value of xpdgains from the xpdGain Mask */ for (i = 1; i <= AR5416_PD_GAINS_IN_MASK; i++) { if ((xpdMask >> (AR5416_PD_GAINS_IN_MASK - i)) & 1) { if (numXpdGain >= AR5416_NUM_PD_GAINS) break; xpdGainValues[numXpdGain] = (uint16_t)(AR5416_PD_GAINS_IN_MASK-i); numXpdGain++; } } OS_REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_NUM_PD_GAIN, (numXpdGain - 1) & 0x3); OS_REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_1, xpdGainValues[0]); OS_REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_2, xpdGainValues[1]); OS_REG_RMW_FIELD(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_GAIN_3, xpdGainValues[2]); for (i = 0; i < AR9287_MAX_CHAINS; i++) { regChainOffset = i * 0x1000; if (pEepData->baseEepHeader.txMask & (1 << i)) { int8_t txPower; pRawDatasetOpenLoop = (struct cal_data_op_loop_ar9287 *)pEepData->calPierData2G[i]; ar9287olcGetTxGainIndex(ah, chan, pRawDatasetOpenLoop, pCalBChans, numPiers, &txPower); ar9287olcSetPDADCs(ah, txPower, i); } } *pTxPowerIndexOffset = 0; } /* XXX hard-coded values? */ #define REDUCE_SCALED_POWER_BY_TWO_CHAIN 6 /* * ar9287SetPowerPerRateTable * * Sets the transmit power in the baseband for the given * operating channel and mode. * * This is like the v14 EEPROM table except the 5GHz code. */ static HAL_BOOL ar9287SetPowerPerRateTable(struct ath_hal *ah, struct ar9287_eeprom *pEepData, const struct ieee80211_channel *chan, int16_t *ratesArray, uint16_t cfgCtl, uint16_t AntennaReduction, uint16_t twiceMaxRegulatoryPower, uint16_t powerLimit) { #define N(a) (sizeof(a)/sizeof(a[0])) /* Local defines to distinguish between extension and control CTL's */ #define EXT_ADDITIVE (0x8000) #define CTL_11A_EXT (CTL_11A | EXT_ADDITIVE) #define CTL_11G_EXT (CTL_11G | EXT_ADDITIVE) #define CTL_11B_EXT (CTL_11B | EXT_ADDITIVE) uint16_t twiceMaxEdgePower = AR5416_MAX_RATE_POWER; int i; int16_t twiceLargestAntenna; struct cal_ctl_data_ar9287 *rep; CAL_TARGET_POWER_LEG targetPowerOfdm; CAL_TARGET_POWER_LEG targetPowerCck = {0, {0, 0, 0, 0}}; CAL_TARGET_POWER_LEG targetPowerOfdmExt = {0, {0, 0, 0, 0}}; CAL_TARGET_POWER_LEG targetPowerCckExt = {0, {0, 0, 0, 0}}; CAL_TARGET_POWER_HT targetPowerHt20; CAL_TARGET_POWER_HT targetPowerHt40 = {0, {0, 0, 0, 0}}; int16_t scaledPower, minCtlPower; #define SUB_NUM_CTL_MODES_AT_2G_40 3 /* excluding HT40, EXT-OFDM, EXT-CCK */ static const uint16_t ctlModesFor11g[] = { CTL_11B, CTL_11G, CTL_2GHT20, CTL_11B_EXT, CTL_11G_EXT, CTL_2GHT40 }; const uint16_t *pCtlMode; uint16_t numCtlModes, ctlMode, freq; CHAN_CENTERS centers; ar5416GetChannelCenters(ah, chan, ¢ers); /* Compute TxPower reduction due to Antenna Gain */ twiceLargestAntenna = AH_MAX( pEepData->modalHeader.antennaGainCh[0], pEepData->modalHeader.antennaGainCh[1]); twiceLargestAntenna = (int16_t)AH_MIN((AntennaReduction) - twiceLargestAntenna, 0); /* XXX setup for 5212 use (really used?) */ ath_hal_eepromSet(ah, AR_EEP_ANTGAINMAX_2, twiceLargestAntenna); /* * scaledPower is the minimum of the user input power level and * the regulatory allowed power level */ scaledPower = AH_MIN(powerLimit, twiceMaxRegulatoryPower + twiceLargestAntenna); /* Reduce scaled Power by number of chains active to get to per chain tx power level */ /* TODO: better value than these? */ switch (owl_get_ntxchains(AH5416(ah)->ah_tx_chainmask)) { case 1: break; case 2: scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN; break; default: return AH_FALSE; /* Unsupported number of chains */ } scaledPower = AH_MAX(0, scaledPower); /* Get target powers from EEPROM - our baseline for TX Power */ /* XXX assume channel is 2ghz */ if (1) { /* Setup for CTL modes */ numCtlModes = N(ctlModesFor11g) - SUB_NUM_CTL_MODES_AT_2G_40; /* CTL_11B, CTL_11G, CTL_2GHT20 */ pCtlMode = ctlModesFor11g; ar5416GetTargetPowersLeg(ah, chan, pEepData->calTargetPowerCck, AR9287_NUM_2G_CCK_TARGET_POWERS, &targetPowerCck, 4, AH_FALSE); ar5416GetTargetPowersLeg(ah, chan, pEepData->calTargetPower2G, AR9287_NUM_2G_20_TARGET_POWERS, &targetPowerOfdm, 4, AH_FALSE); ar5416GetTargetPowers(ah, chan, pEepData->calTargetPower2GHT20, AR9287_NUM_2G_20_TARGET_POWERS, &targetPowerHt20, 8, AH_FALSE); if (IEEE80211_IS_CHAN_HT40(chan)) { numCtlModes = N(ctlModesFor11g); /* All 2G CTL's */ ar5416GetTargetPowers(ah, chan, pEepData->calTargetPower2GHT40, AR9287_NUM_2G_40_TARGET_POWERS, &targetPowerHt40, 8, AH_TRUE); /* Get target powers for extension channels */ ar5416GetTargetPowersLeg(ah, chan, pEepData->calTargetPowerCck, AR9287_NUM_2G_CCK_TARGET_POWERS, &targetPowerCckExt, 4, AH_TRUE); ar5416GetTargetPowersLeg(ah, chan, pEepData->calTargetPower2G, AR9287_NUM_2G_20_TARGET_POWERS, &targetPowerOfdmExt, 4, AH_TRUE); } } /* * For MIMO, need to apply regulatory caps individually across dynamically * running modes: CCK, OFDM, HT20, HT40 * * The outer loop walks through each possible applicable runtime mode. * The inner loop walks through each ctlIndex entry in EEPROM. * The ctl value is encoded as [7:4] == test group, [3:0] == test mode. * */ for (ctlMode = 0; ctlMode < numCtlModes; ctlMode++) { HAL_BOOL isHt40CtlMode = (pCtlMode[ctlMode] == CTL_5GHT40) || (pCtlMode[ctlMode] == CTL_2GHT40); if (isHt40CtlMode) { freq = centers.ctl_center; } else if (pCtlMode[ctlMode] & EXT_ADDITIVE) { freq = centers.ext_center; } else { freq = centers.ctl_center; } /* walk through each CTL index stored in EEPROM */ for (i = 0; (i < AR9287_NUM_CTLS) && pEepData->ctlIndex[i]; i++) { uint16_t twiceMinEdgePower; /* compare test group from regulatory channel list with test mode from pCtlMode list */ if ((((cfgCtl & ~CTL_MODE_M) | (pCtlMode[ctlMode] & CTL_MODE_M)) == pEepData->ctlIndex[i]) || (((cfgCtl & ~CTL_MODE_M) | (pCtlMode[ctlMode] & CTL_MODE_M)) == ((pEepData->ctlIndex[i] & CTL_MODE_M) | SD_NO_CTL))) { rep = &(pEepData->ctlData[i]); twiceMinEdgePower = ar5416GetMaxEdgePower(freq, rep->ctlEdges[owl_get_ntxchains(AH5416(ah)->ah_tx_chainmask) - 1], IEEE80211_IS_CHAN_2GHZ(chan)); if ((cfgCtl & ~CTL_MODE_M) == SD_NO_CTL) { /* Find the minimum of all CTL edge powers that apply to this channel */ twiceMaxEdgePower = AH_MIN(twiceMaxEdgePower, twiceMinEdgePower); } else { /* specific */ twiceMaxEdgePower = twiceMinEdgePower; break; } } } minCtlPower = (uint8_t)AH_MIN(twiceMaxEdgePower, scaledPower); /* Apply ctl mode to correct target power set */ switch(pCtlMode[ctlMode]) { case CTL_11B: for (i = 0; i < N(targetPowerCck.tPow2x); i++) { targetPowerCck.tPow2x[i] = (uint8_t)AH_MIN(targetPowerCck.tPow2x[i], minCtlPower); } break; case CTL_11A: case CTL_11G: for (i = 0; i < N(targetPowerOfdm.tPow2x); i++) { targetPowerOfdm.tPow2x[i] = (uint8_t)AH_MIN(targetPowerOfdm.tPow2x[i], minCtlPower); } break; case CTL_5GHT20: case CTL_2GHT20: for (i = 0; i < N(targetPowerHt20.tPow2x); i++) { targetPowerHt20.tPow2x[i] = (uint8_t)AH_MIN(targetPowerHt20.tPow2x[i], minCtlPower); } break; case CTL_11B_EXT: targetPowerCckExt.tPow2x[0] = (uint8_t)AH_MIN(targetPowerCckExt.tPow2x[0], minCtlPower); break; case CTL_11A_EXT: case CTL_11G_EXT: targetPowerOfdmExt.tPow2x[0] = (uint8_t)AH_MIN(targetPowerOfdmExt.tPow2x[0], minCtlPower); break; case CTL_5GHT40: case CTL_2GHT40: for (i = 0; i < N(targetPowerHt40.tPow2x); i++) { targetPowerHt40.tPow2x[i] = (uint8_t)AH_MIN(targetPowerHt40.tPow2x[i], minCtlPower); } break; default: return AH_FALSE; break; } } /* end ctl mode checking */ /* Set rates Array from collected data */ ar5416SetRatesArrayFromTargetPower(ah, chan, ratesArray, &targetPowerCck, &targetPowerCckExt, &targetPowerOfdm, &targetPowerOfdmExt, &targetPowerHt20, &targetPowerHt40); return AH_TRUE; #undef EXT_ADDITIVE #undef CTL_11A_EXT #undef CTL_11G_EXT #undef CTL_11B_EXT #undef SUB_NUM_CTL_MODES_AT_5G_40 #undef SUB_NUM_CTL_MODES_AT_2G_40 #undef N } #undef REDUCE_SCALED_POWER_BY_TWO_CHAIN /* * This is based off of the AR5416/AR9285 code and likely could * be unified in the future. */ HAL_BOOL ar9287SetTransmitPower(struct ath_hal *ah, const struct ieee80211_channel *chan, uint16_t *rfXpdGain) { #define POW_SM(_r, _s) (((_r) & 0x3f) << (_s)) #define N(a) (sizeof (a) / sizeof (a[0])) const struct modal_eep_ar9287_header *pModal; struct ath_hal_5212 *ahp = AH5212(ah); int16_t txPowerIndexOffset = 0; int i; uint16_t cfgCtl; uint16_t powerLimit; uint16_t twiceAntennaReduction; uint16_t twiceMaxRegulatoryPower; int16_t maxPower; HAL_EEPROM_9287 *ee = AH_PRIVATE(ah)->ah_eeprom; struct ar9287_eeprom *pEepData = &ee->ee_base; AH5416(ah)->ah_ht40PowerIncForPdadc = 2; /* Setup info for the actual eeprom */ OS_MEMZERO(AH5416(ah)->ah_ratesArray, sizeof(AH5416(ah)->ah_ratesArray)); cfgCtl = ath_hal_getctl(ah, chan); powerLimit = chan->ic_maxregpower * 2; twiceAntennaReduction = chan->ic_maxantgain; twiceMaxRegulatoryPower = AH_MIN(MAX_RATE_POWER, AH_PRIVATE(ah)->ah_powerLimit); pModal = &pEepData->modalHeader; HALDEBUG(ah, HAL_DEBUG_RESET, "%s Channel=%u CfgCtl=%u\n", __func__,chan->ic_freq, cfgCtl ); /* XXX Assume Minor is v2 or later */ AH5416(ah)->ah_ht40PowerIncForPdadc = pModal->ht40PowerIncForPdadc; /* Fetch per-rate power table for the given channel */ if (! ar9287SetPowerPerRateTable(ah, pEepData, chan, &AH5416(ah)->ah_ratesArray[0], cfgCtl, twiceAntennaReduction, twiceMaxRegulatoryPower, powerLimit)) { HALDEBUG(ah, HAL_DEBUG_ANY, "%s: unable to set tx power per rate table\n", __func__); return AH_FALSE; } /* Set TX power control calibration curves for each TX chain */ ar9287SetPowerCalTable(ah, chan, &txPowerIndexOffset); /* Calculate maximum power level */ maxPower = AH_MAX(AH5416(ah)->ah_ratesArray[rate6mb], AH5416(ah)->ah_ratesArray[rateHt20_0]); maxPower = AH_MAX(maxPower, AH5416(ah)->ah_ratesArray[rate1l]); if (IEEE80211_IS_CHAN_HT40(chan)) maxPower = AH_MAX(maxPower, AH5416(ah)->ah_ratesArray[rateHt40_0]); ahp->ah_tx6PowerInHalfDbm = maxPower; AH_PRIVATE(ah)->ah_maxPowerLevel = maxPower; ahp->ah_txPowerIndexOffset = txPowerIndexOffset; /* * txPowerIndexOffset is set by the SetPowerTable() call - * adjust the rate table (0 offset if rates EEPROM not loaded) */ /* XXX what about the pwrTableOffset? */ for (i = 0; i < N(AH5416(ah)->ah_ratesArray); i++) { AH5416(ah)->ah_ratesArray[i] = (int16_t)(txPowerIndexOffset + AH5416(ah)->ah_ratesArray[i]); /* -5 dBm offset for Merlin and later; this includes Kiwi */ AH5416(ah)->ah_ratesArray[i] -= AR5416_PWR_TABLE_OFFSET_DB * 2; if (AH5416(ah)->ah_ratesArray[i] > AR5416_MAX_RATE_POWER) AH5416(ah)->ah_ratesArray[i] = AR5416_MAX_RATE_POWER; if (AH5416(ah)->ah_ratesArray[i] < 0) AH5416(ah)->ah_ratesArray[i] = 0; } #ifdef AH_EEPROM_DUMP ar5416PrintPowerPerRate(ah, AH5416(ah)->ah_ratesArray); #endif /* * Adjust the HT40 power to meet the correct target TX power * for 40MHz mode, based on TX power curves that are established * for 20MHz mode. * * XXX handle overflow/too high power level? */ if (IEEE80211_IS_CHAN_HT40(chan)) { AH5416(ah)->ah_ratesArray[rateHt40_0] += AH5416(ah)->ah_ht40PowerIncForPdadc; AH5416(ah)->ah_ratesArray[rateHt40_1] += AH5416(ah)->ah_ht40PowerIncForPdadc; AH5416(ah)->ah_ratesArray[rateHt40_2] += AH5416(ah)->ah_ht40PowerIncForPdadc; AH5416(ah)->ah_ratesArray[rateHt40_3] += AH5416(ah)->ah_ht40PowerIncForPdadc; AH5416(ah)->ah_ratesArray[rateHt40_4] += AH5416(ah)->ah_ht40PowerIncForPdadc; AH5416(ah)->ah_ratesArray[rateHt40_5] += AH5416(ah)->ah_ht40PowerIncForPdadc; AH5416(ah)->ah_ratesArray[rateHt40_6] += AH5416(ah)->ah_ht40PowerIncForPdadc; AH5416(ah)->ah_ratesArray[rateHt40_7] += AH5416(ah)->ah_ht40PowerIncForPdadc; } /* Write the TX power rate registers */ ar5416WriteTxPowerRateRegisters(ah, chan, AH5416(ah)->ah_ratesArray); return AH_TRUE; #undef POW_SM #undef N } /* * Read EEPROM header info and program the device for correct operation * given the channel value. */ HAL_BOOL ar9287SetBoardValues(struct ath_hal *ah, const struct ieee80211_channel *chan) { const HAL_EEPROM_9287 *ee = AH_PRIVATE(ah)->ah_eeprom; const struct ar9287_eeprom *eep = &ee->ee_base; const struct modal_eep_ar9287_header *pModal = &eep->modalHeader; uint16_t antWrites[AR9287_ANT_16S]; uint32_t regChainOffset, regval; uint8_t txRxAttenLocal; int i, j, offset_num; pModal = &eep->modalHeader; antWrites[0] = (uint16_t)((pModal->antCtrlCommon >> 28) & 0xF); antWrites[1] = (uint16_t)((pModal->antCtrlCommon >> 24) & 0xF); antWrites[2] = (uint16_t)((pModal->antCtrlCommon >> 20) & 0xF); antWrites[3] = (uint16_t)((pModal->antCtrlCommon >> 16) & 0xF); antWrites[4] = (uint16_t)((pModal->antCtrlCommon >> 12) & 0xF); antWrites[5] = (uint16_t)((pModal->antCtrlCommon >> 8) & 0xF); antWrites[6] = (uint16_t)((pModal->antCtrlCommon >> 4) & 0xF); antWrites[7] = (uint16_t)(pModal->antCtrlCommon & 0xF); offset_num = 8; for (i = 0, j = offset_num; i < AR9287_MAX_CHAINS; i++) { antWrites[j++] = (uint16_t)((pModal->antCtrlChain[i] >> 28) & 0xf); antWrites[j++] = (uint16_t)((pModal->antCtrlChain[i] >> 10) & 0x3); antWrites[j++] = (uint16_t)((pModal->antCtrlChain[i] >> 8) & 0x3); antWrites[j++] = 0; antWrites[j++] = (uint16_t)((pModal->antCtrlChain[i] >> 6) & 0x3); antWrites[j++] = (uint16_t)((pModal->antCtrlChain[i] >> 4) & 0x3); antWrites[j++] = (uint16_t)((pModal->antCtrlChain[i] >> 2) & 0x3); antWrites[j++] = (uint16_t)(pModal->antCtrlChain[i] & 0x3); } OS_REG_WRITE(ah, AR_PHY_SWITCH_COM, pModal->antCtrlCommon); for (i = 0; i < AR9287_MAX_CHAINS; i++) { regChainOffset = i * 0x1000; OS_REG_WRITE(ah, AR_PHY_SWITCH_CHAIN_0 + regChainOffset, pModal->antCtrlChain[i]); OS_REG_WRITE(ah, AR_PHY_TIMING_CTRL4_CHAIN(0) + regChainOffset, (OS_REG_READ(ah, AR_PHY_TIMING_CTRL4_CHAIN(0) + regChainOffset) & ~(AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF | AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF)) | SM(pModal->iqCalICh[i], AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF) | SM(pModal->iqCalQCh[i], AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF)); txRxAttenLocal = pModal->txRxAttenCh[i]; OS_REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset, AR_PHY_GAIN_2GHZ_XATTEN1_MARGIN, pModal->bswMargin[i]); OS_REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset, AR_PHY_GAIN_2GHZ_XATTEN1_DB, pModal->bswAtten[i]); OS_REG_RMW_FIELD(ah, AR_PHY_RXGAIN + regChainOffset, AR9280_PHY_RXGAIN_TXRX_ATTEN, txRxAttenLocal); OS_REG_RMW_FIELD(ah, AR_PHY_RXGAIN + regChainOffset, AR9280_PHY_RXGAIN_TXRX_MARGIN, pModal->rxTxMarginCh[i]); } if (IEEE80211_IS_CHAN_HT40(chan)) OS_REG_RMW_FIELD(ah, AR_PHY_SETTLING, AR_PHY_SETTLING_SWITCH, pModal->swSettleHt40); else OS_REG_RMW_FIELD(ah, AR_PHY_SETTLING, AR_PHY_SETTLING_SWITCH, pModal->switchSettling); OS_REG_RMW_FIELD(ah, AR_PHY_DESIRED_SZ, AR_PHY_DESIRED_SZ_ADC, pModal->adcDesiredSize); OS_REG_WRITE(ah, AR_PHY_RF_CTL4, SM(pModal->txEndToXpaOff, AR_PHY_RF_CTL4_TX_END_XPAA_OFF) | SM(pModal->txEndToXpaOff, AR_PHY_RF_CTL4_TX_END_XPAB_OFF) | SM(pModal->txFrameToXpaOn, AR_PHY_RF_CTL4_FRAME_XPAA_ON) | SM(pModal->txFrameToXpaOn, AR_PHY_RF_CTL4_FRAME_XPAB_ON)); OS_REG_RMW_FIELD(ah, AR_PHY_RF_CTL3, AR_PHY_TX_END_TO_A2_RX_ON, pModal->txEndToRxOn); OS_REG_RMW_FIELD(ah, AR_PHY_CCA, AR9280_PHY_CCA_THRESH62, pModal->thresh62); OS_REG_RMW_FIELD(ah, AR_PHY_EXT_CCA0, AR_PHY_EXT_CCA0_THRESH62, pModal->thresh62); regval = OS_REG_READ(ah, AR9287_AN_RF2G3_CH0); regval &= ~(AR9287_AN_RF2G3_DB1 | AR9287_AN_RF2G3_DB2 | AR9287_AN_RF2G3_OB_CCK | AR9287_AN_RF2G3_OB_PSK | AR9287_AN_RF2G3_OB_QAM | AR9287_AN_RF2G3_OB_PAL_OFF); regval |= (SM(pModal->db1, AR9287_AN_RF2G3_DB1) | SM(pModal->db2, AR9287_AN_RF2G3_DB2) | SM(pModal->ob_cck, AR9287_AN_RF2G3_OB_CCK) | SM(pModal->ob_psk, AR9287_AN_RF2G3_OB_PSK) | SM(pModal->ob_qam, AR9287_AN_RF2G3_OB_QAM) | SM(pModal->ob_pal_off, AR9287_AN_RF2G3_OB_PAL_OFF)); /* Analog write - requires a 100usec delay */ OS_A_REG_WRITE(ah, AR9287_AN_RF2G3_CH0, regval); regval = OS_REG_READ(ah, AR9287_AN_RF2G3_CH1); regval &= ~(AR9287_AN_RF2G3_DB1 | AR9287_AN_RF2G3_DB2 | AR9287_AN_RF2G3_OB_CCK | AR9287_AN_RF2G3_OB_PSK | AR9287_AN_RF2G3_OB_QAM | AR9287_AN_RF2G3_OB_PAL_OFF); regval |= (SM(pModal->db1, AR9287_AN_RF2G3_DB1) | SM(pModal->db2, AR9287_AN_RF2G3_DB2) | SM(pModal->ob_cck, AR9287_AN_RF2G3_OB_CCK) | SM(pModal->ob_psk, AR9287_AN_RF2G3_OB_PSK) | SM(pModal->ob_qam, AR9287_AN_RF2G3_OB_QAM) | SM(pModal->ob_pal_off, AR9287_AN_RF2G3_OB_PAL_OFF)); OS_A_REG_WRITE(ah, AR9287_AN_RF2G3_CH1, regval); OS_REG_RMW_FIELD(ah, AR_PHY_RF_CTL2, AR_PHY_TX_FRAME_TO_DATA_START, pModal->txFrameToDataStart); OS_REG_RMW_FIELD(ah, AR_PHY_RF_CTL2, AR_PHY_TX_FRAME_TO_PA_ON, pModal->txFrameToPaOn); OS_A_REG_RMW_FIELD(ah, AR9287_AN_TOP2, AR9287_AN_TOP2_XPABIAS_LVL, pModal->xpaBiasLvl); return AH_TRUE; }