/****************************************************************************** * * Module Name: exregion - ACPI default OpRegion (address space) handlers * *****************************************************************************/ /* * Copyright (C) 2000 - 2015, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */ #include #include #include #define _COMPONENT ACPI_EXECUTER ACPI_MODULE_NAME ("exregion") /******************************************************************************* * * FUNCTION: AcpiExSystemMemorySpaceHandler * * PARAMETERS: Function - Read or Write operation * Address - Where in the space to read or write * BitWidth - Field width in bits (8, 16, or 32) * Value - Pointer to in or out value * HandlerContext - Pointer to Handler's context * RegionContext - Pointer to context specific to the * accessed region * * RETURN: Status * * DESCRIPTION: Handler for the System Memory address space (Op Region) * ******************************************************************************/ ACPI_STATUS AcpiExSystemMemorySpaceHandler ( UINT32 Function, ACPI_PHYSICAL_ADDRESS Address, UINT32 BitWidth, UINT64 *Value, void *HandlerContext, void *RegionContext) { ACPI_STATUS Status = AE_OK; void *LogicalAddrPtr = NULL; ACPI_MEM_SPACE_CONTEXT *MemInfo = RegionContext; UINT32 Length; ACPI_SIZE MapLength; ACPI_SIZE PageBoundaryMapLength; #ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED UINT32 Remainder; #endif ACPI_FUNCTION_TRACE (ExSystemMemorySpaceHandler); /* Validate and translate the bit width */ switch (BitWidth) { case 8: Length = 1; break; case 16: Length = 2; break; case 32: Length = 4; break; case 64: Length = 8; break; default: ACPI_ERROR ((AE_INFO, "Invalid SystemMemory width %u", BitWidth)); return_ACPI_STATUS (AE_AML_OPERAND_VALUE); } #ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED /* * Hardware does not support non-aligned data transfers, we must verify * the request. */ (void) AcpiUtShortDivide ((UINT64) Address, Length, NULL, &Remainder); if (Remainder != 0) { return_ACPI_STATUS (AE_AML_ALIGNMENT); } #endif /* * Does the request fit into the cached memory mapping? * Is 1) Address below the current mapping? OR * 2) Address beyond the current mapping? */ if ((Address < MemInfo->MappedPhysicalAddress) || (((UINT64) Address + Length) > ((UINT64) MemInfo->MappedPhysicalAddress + MemInfo->MappedLength))) { /* * The request cannot be resolved by the current memory mapping; * Delete the existing mapping and create a new one. */ if (MemInfo->MappedLength) { /* Valid mapping, delete it */ AcpiOsUnmapMemory (MemInfo->MappedLogicalAddress, MemInfo->MappedLength); } /* * October 2009: Attempt to map from the requested address to the * end of the region. However, we will never map more than one * page, nor will we cross a page boundary. */ MapLength = (ACPI_SIZE) ((MemInfo->Address + MemInfo->Length) - Address); /* * If mapping the entire remaining portion of the region will cross * a page boundary, just map up to the page boundary, do not cross. * On some systems, crossing a page boundary while mapping regions * can cause warnings if the pages have different attributes * due to resource management. * * This has the added benefit of constraining a single mapping to * one page, which is similar to the original code that used a 4k * maximum window. */ PageBoundaryMapLength = (ACPI_SIZE) (ACPI_ROUND_UP (Address, ACPI_DEFAULT_PAGE_SIZE) - Address); if (PageBoundaryMapLength == 0) { PageBoundaryMapLength = ACPI_DEFAULT_PAGE_SIZE; } if (MapLength > PageBoundaryMapLength) { MapLength = PageBoundaryMapLength; } /* Create a new mapping starting at the address given */ MemInfo->MappedLogicalAddress = AcpiOsMapMemory (Address, MapLength); if (!MemInfo->MappedLogicalAddress) { ACPI_ERROR ((AE_INFO, "Could not map memory at 0x%8.8X%8.8X, size %u", ACPI_FORMAT_UINT64 (Address), (UINT32) MapLength)); MemInfo->MappedLength = 0; return_ACPI_STATUS (AE_NO_MEMORY); } /* Save the physical address and mapping size */ MemInfo->MappedPhysicalAddress = Address; MemInfo->MappedLength = MapLength; } /* * Generate a logical pointer corresponding to the address we want to * access */ LogicalAddrPtr = MemInfo->MappedLogicalAddress + ((UINT64) Address - (UINT64) MemInfo->MappedPhysicalAddress); ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "System-Memory (width %u) R/W %u Address=%8.8X%8.8X\n", BitWidth, Function, ACPI_FORMAT_UINT64 (Address))); /* * Perform the memory read or write * * Note: For machines that do not support non-aligned transfers, the target * address was checked for alignment above. We do not attempt to break the * transfer up into smaller (byte-size) chunks because the AML specifically * asked for a transfer width that the hardware may require. */ switch (Function) { case ACPI_READ: *Value = 0; switch (BitWidth) { case 8: *Value = (UINT64) ACPI_GET8 (LogicalAddrPtr); break; case 16: *Value = (UINT64) ACPI_GET16 (LogicalAddrPtr); break; case 32: *Value = (UINT64) ACPI_GET32 (LogicalAddrPtr); break; case 64: *Value = (UINT64) ACPI_GET64 (LogicalAddrPtr); break; default: /* BitWidth was already validated */ break; } break; case ACPI_WRITE: switch (BitWidth) { case 8: ACPI_SET8 (LogicalAddrPtr, *Value); break; case 16: ACPI_SET16 (LogicalAddrPtr, *Value); break; case 32: ACPI_SET32 (LogicalAddrPtr, *Value); break; case 64: ACPI_SET64 (LogicalAddrPtr, *Value); break; default: /* BitWidth was already validated */ break; } break; default: Status = AE_BAD_PARAMETER; break; } return_ACPI_STATUS (Status); } /******************************************************************************* * * FUNCTION: AcpiExSystemIoSpaceHandler * * PARAMETERS: Function - Read or Write operation * Address - Where in the space to read or write * BitWidth - Field width in bits (8, 16, or 32) * Value - Pointer to in or out value * HandlerContext - Pointer to Handler's context * RegionContext - Pointer to context specific to the * accessed region * * RETURN: Status * * DESCRIPTION: Handler for the System IO address space (Op Region) * ******************************************************************************/ ACPI_STATUS AcpiExSystemIoSpaceHandler ( UINT32 Function, ACPI_PHYSICAL_ADDRESS Address, UINT32 BitWidth, UINT64 *Value, void *HandlerContext, void *RegionContext) { ACPI_STATUS Status = AE_OK; UINT32 Value32; ACPI_FUNCTION_TRACE (ExSystemIoSpaceHandler); ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "System-IO (width %u) R/W %u Address=%8.8X%8.8X\n", BitWidth, Function, ACPI_FORMAT_UINT64 (Address))); /* Decode the function parameter */ switch (Function) { case ACPI_READ: Status = AcpiHwReadPort ((ACPI_IO_ADDRESS) Address, &Value32, BitWidth); *Value = Value32; break; case ACPI_WRITE: Status = AcpiHwWritePort ((ACPI_IO_ADDRESS) Address, (UINT32) *Value, BitWidth); break; default: Status = AE_BAD_PARAMETER; break; } return_ACPI_STATUS (Status); } /******************************************************************************* * * FUNCTION: AcpiExPciConfigSpaceHandler * * PARAMETERS: Function - Read or Write operation * Address - Where in the space to read or write * BitWidth - Field width in bits (8, 16, or 32) * Value - Pointer to in or out value * HandlerContext - Pointer to Handler's context * RegionContext - Pointer to context specific to the * accessed region * * RETURN: Status * * DESCRIPTION: Handler for the PCI Config address space (Op Region) * ******************************************************************************/ ACPI_STATUS AcpiExPciConfigSpaceHandler ( UINT32 Function, ACPI_PHYSICAL_ADDRESS Address, UINT32 BitWidth, UINT64 *Value, void *HandlerContext, void *RegionContext) { ACPI_STATUS Status = AE_OK; ACPI_PCI_ID *PciId; UINT16 PciRegister; ACPI_FUNCTION_TRACE (ExPciConfigSpaceHandler); /* * The arguments to AcpiOs(Read|Write)PciConfiguration are: * * PciSegment is the PCI bus segment range 0-31 * PciBus is the PCI bus number range 0-255 * PciDevice is the PCI device number range 0-31 * PciFunction is the PCI device function number * PciRegister is the Config space register range 0-255 bytes * * Value - input value for write, output address for read * */ PciId = (ACPI_PCI_ID *) RegionContext; PciRegister = (UINT16) (UINT32) Address; ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "Pci-Config %u (%u) Seg(%04x) Bus(%04x) Dev(%04x) Func(%04x) Reg(%04x)\n", Function, BitWidth, PciId->Segment, PciId->Bus, PciId->Device, PciId->Function, PciRegister)); switch (Function) { case ACPI_READ: *Value = 0; Status = AcpiOsReadPciConfiguration (PciId, PciRegister, Value, BitWidth); break; case ACPI_WRITE: Status = AcpiOsWritePciConfiguration (PciId, PciRegister, *Value, BitWidth); break; default: Status = AE_BAD_PARAMETER; break; } return_ACPI_STATUS (Status); } /******************************************************************************* * * FUNCTION: AcpiExCmosSpaceHandler * * PARAMETERS: Function - Read or Write operation * Address - Where in the space to read or write * BitWidth - Field width in bits (8, 16, or 32) * Value - Pointer to in or out value * HandlerContext - Pointer to Handler's context * RegionContext - Pointer to context specific to the * accessed region * * RETURN: Status * * DESCRIPTION: Handler for the CMOS address space (Op Region) * ******************************************************************************/ ACPI_STATUS AcpiExCmosSpaceHandler ( UINT32 Function, ACPI_PHYSICAL_ADDRESS Address, UINT32 BitWidth, UINT64 *Value, void *HandlerContext, void *RegionContext) { ACPI_STATUS Status = AE_OK; ACPI_FUNCTION_TRACE (ExCmosSpaceHandler); return_ACPI_STATUS (Status); } /******************************************************************************* * * FUNCTION: AcpiExPciBarSpaceHandler * * PARAMETERS: Function - Read or Write operation * Address - Where in the space to read or write * BitWidth - Field width in bits (8, 16, or 32) * Value - Pointer to in or out value * HandlerContext - Pointer to Handler's context * RegionContext - Pointer to context specific to the * accessed region * * RETURN: Status * * DESCRIPTION: Handler for the PCI BarTarget address space (Op Region) * ******************************************************************************/ ACPI_STATUS AcpiExPciBarSpaceHandler ( UINT32 Function, ACPI_PHYSICAL_ADDRESS Address, UINT32 BitWidth, UINT64 *Value, void *HandlerContext, void *RegionContext) { ACPI_STATUS Status = AE_OK; ACPI_FUNCTION_TRACE (ExPciBarSpaceHandler); return_ACPI_STATUS (Status); } /******************************************************************************* * * FUNCTION: AcpiExDataTableSpaceHandler * * PARAMETERS: Function - Read or Write operation * Address - Where in the space to read or write * BitWidth - Field width in bits (8, 16, or 32) * Value - Pointer to in or out value * HandlerContext - Pointer to Handler's context * RegionContext - Pointer to context specific to the * accessed region * * RETURN: Status * * DESCRIPTION: Handler for the Data Table address space (Op Region) * ******************************************************************************/ ACPI_STATUS AcpiExDataTableSpaceHandler ( UINT32 Function, ACPI_PHYSICAL_ADDRESS Address, UINT32 BitWidth, UINT64 *Value, void *HandlerContext, void *RegionContext) { ACPI_FUNCTION_TRACE (ExDataTableSpaceHandler); /* * Perform the memory read or write. The BitWidth was already * validated. */ switch (Function) { case ACPI_READ: memcpy (ACPI_CAST_PTR (char, Value), ACPI_PHYSADDR_TO_PTR (Address), ACPI_DIV_8 (BitWidth)); break; case ACPI_WRITE: memcpy (ACPI_PHYSADDR_TO_PTR (Address), ACPI_CAST_PTR (char, Value), ACPI_DIV_8 (BitWidth)); break; default: return_ACPI_STATUS (AE_BAD_PARAMETER); } return_ACPI_STATUS (AE_OK); }