/****************************************************************************** * * Module Name: exoparg1 - AML execution - opcodes with 1 argument * *****************************************************************************/ /****************************************************************************** * * 1. Copyright Notice * * Some or all of this work - Copyright (c) 1999 - 2022, Intel Corp. * All rights reserved. * * 2. License * * 2.1. This is your license from Intel Corp. under its intellectual property * rights. You may have additional license terms from the party that provided * you this software, covering your right to use that party's intellectual * property rights. * * 2.2. Intel grants, free of charge, to any person ("Licensee") obtaining a * copy of the source code appearing in this file ("Covered Code") an * irrevocable, perpetual, worldwide license under Intel's copyrights in the * base code distributed originally by Intel ("Original Intel Code") to copy, * make derivatives, distribute, use and display any portion of the Covered * Code in any form, with the right to sublicense such rights; and * * 2.3. Intel grants Licensee a non-exclusive and non-transferable patent * license (with the right to sublicense), under only those claims of Intel * patents that are infringed by the Original Intel Code, to make, use, sell, * offer to sell, and import the Covered Code and derivative works thereof * solely to the minimum extent necessary to exercise the above copyright * license, and in no event shall the patent license extend to any additions * to or modifications of the Original Intel Code. No other license or right * is granted directly or by implication, estoppel or otherwise; * * The above copyright and patent license is granted only if the following * conditions are met: * * 3. Conditions * * 3.1. Redistribution of Source with Rights to Further Distribute Source. * Redistribution of source code of any substantial portion of the Covered * Code or modification with rights to further distribute source must include * the above Copyright Notice, the above License, this list of Conditions, * and the following Disclaimer and Export Compliance provision. In addition, * Licensee must cause all Covered Code to which Licensee contributes to * contain a file documenting the changes Licensee made to create that Covered * Code and the date of any change. Licensee must include in that file the * documentation of any changes made by any predecessor Licensee. Licensee * must include a prominent statement that the modification is derived, * directly or indirectly, from Original Intel Code. * * 3.2. Redistribution of Source with no Rights to Further Distribute Source. * Redistribution of source code of any substantial portion of the Covered * Code or modification without rights to further distribute source must * include the following Disclaimer and Export Compliance provision in the * documentation and/or other materials provided with distribution. In * addition, Licensee may not authorize further sublicense of source of any * portion of the Covered Code, and must include terms to the effect that the * license from Licensee to its licensee is limited to the intellectual * property embodied in the software Licensee provides to its licensee, and * not to intellectual property embodied in modifications its licensee may * make. * * 3.3. Redistribution of Executable. Redistribution in executable form of any * substantial portion of the Covered Code or modification must reproduce the * above Copyright Notice, and the following Disclaimer and Export Compliance * provision in the documentation and/or other materials provided with the * distribution. * * 3.4. Intel retains all right, title, and interest in and to the Original * Intel Code. * * 3.5. Neither the name Intel nor any other trademark owned or controlled by * Intel shall be used in advertising or otherwise to promote the sale, use or * other dealings in products derived from or relating to the Covered Code * without prior written authorization from Intel. * * 4. Disclaimer and Export Compliance * * 4.1. INTEL MAKES NO WARRANTY OF ANY KIND REGARDING ANY SOFTWARE PROVIDED * HERE. ANY SOFTWARE ORIGINATING FROM INTEL OR DERIVED FROM INTEL SOFTWARE * IS PROVIDED "AS IS," AND INTEL WILL NOT PROVIDE ANY SUPPORT, ASSISTANCE, * INSTALLATION, TRAINING OR OTHER SERVICES. INTEL WILL NOT PROVIDE ANY * UPDATES, ENHANCEMENTS OR EXTENSIONS. INTEL SPECIFICALLY DISCLAIMS ANY * IMPLIED WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT AND FITNESS FOR A * PARTICULAR PURPOSE. * * 4.2. IN NO EVENT SHALL INTEL HAVE ANY LIABILITY TO LICENSEE, ITS LICENSEES * OR ANY OTHER THIRD PARTY, FOR ANY LOST PROFITS, LOST DATA, LOSS OF USE OR * COSTS OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, OR FOR ANY INDIRECT, * SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THIS AGREEMENT, UNDER ANY * CAUSE OF ACTION OR THEORY OF LIABILITY, AND IRRESPECTIVE OF WHETHER INTEL * HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES. THESE LIMITATIONS * SHALL APPLY NOTWITHSTANDING THE FAILURE OF THE ESSENTIAL PURPOSE OF ANY * LIMITED REMEDY. * * 4.3. Licensee shall not export, either directly or indirectly, any of this * software or system incorporating such software without first obtaining any * required license or other approval from the U. S. Department of Commerce or * any other agency or department of the United States Government. In the * event Licensee exports any such software from the United States or * re-exports any such software from a foreign destination, Licensee shall * ensure that the distribution and export/re-export of the software is in * compliance with all laws, regulations, orders, or other restrictions of the * U.S. Export Administration Regulations. Licensee agrees that neither it nor * any of its subsidiaries will export/re-export any technical data, process, * software, or service, directly or indirectly, to any country for which the * United States government or any agency thereof requires an export license, * other governmental approval, or letter of assurance, without first obtaining * such license, approval or letter. * ***************************************************************************** * * Alternatively, you may choose to be licensed under the terms of the * following license: * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * Alternatively, you may choose to be licensed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * *****************************************************************************/ #include #include #include #include #include #include #include #define _COMPONENT ACPI_EXECUTER ACPI_MODULE_NAME ("exoparg1") /*! * Naming convention for AML interpreter execution routines. * * The routines that begin execution of AML opcodes are named with a common * convention based upon the number of arguments, the number of target operands, * and whether or not a value is returned: * * AcpiExOpcode_xA_yT_zR * * Where: * * xA - ARGUMENTS: The number of arguments (input operands) that are * required for this opcode type (0 through 6 args). * yT - TARGETS: The number of targets (output operands) that are required * for this opcode type (0, 1, or 2 targets). * zR - RETURN VALUE: Indicates whether this opcode type returns a value * as the function return (0 or 1). * * The AcpiExOpcode* functions are called via the Dispatcher component with * fully resolved operands. !*/ /******************************************************************************* * * FUNCTION: AcpiExOpcode_0A_0T_1R * * PARAMETERS: WalkState - Current state (contains AML opcode) * * RETURN: Status * * DESCRIPTION: Execute operator with no operands, one return value * ******************************************************************************/ ACPI_STATUS AcpiExOpcode_0A_0T_1R ( ACPI_WALK_STATE *WalkState) { ACPI_STATUS Status = AE_OK; ACPI_OPERAND_OBJECT *ReturnDesc = NULL; ACPI_FUNCTION_TRACE_STR (ExOpcode_0A_0T_1R, AcpiPsGetOpcodeName (WalkState->Opcode)); /* Examine the AML opcode */ switch (WalkState->Opcode) { case AML_TIMER_OP: /* Timer () */ /* Create a return object of type Integer */ ReturnDesc = AcpiUtCreateIntegerObject (AcpiOsGetTimer ()); if (!ReturnDesc) { Status = AE_NO_MEMORY; goto Cleanup; } break; default: /* Unknown opcode */ ACPI_ERROR ((AE_INFO, "Unknown AML opcode 0x%X", WalkState->Opcode)); Status = AE_AML_BAD_OPCODE; break; } Cleanup: /* Delete return object on error */ if ((ACPI_FAILURE (Status)) || WalkState->ResultObj) { AcpiUtRemoveReference (ReturnDesc); WalkState->ResultObj = NULL; } else { /* Save the return value */ WalkState->ResultObj = ReturnDesc; } return_ACPI_STATUS (Status); } /******************************************************************************* * * FUNCTION: AcpiExOpcode_1A_0T_0R * * PARAMETERS: WalkState - Current state (contains AML opcode) * * RETURN: Status * * DESCRIPTION: Execute Type 1 monadic operator with numeric operand on * object stack * ******************************************************************************/ ACPI_STATUS AcpiExOpcode_1A_0T_0R ( ACPI_WALK_STATE *WalkState) { ACPI_OPERAND_OBJECT **Operand = &WalkState->Operands[0]; ACPI_STATUS Status = AE_OK; ACPI_FUNCTION_TRACE_STR (ExOpcode_1A_0T_0R, AcpiPsGetOpcodeName (WalkState->Opcode)); /* Examine the AML opcode */ switch (WalkState->Opcode) { case AML_RELEASE_OP: /* Release (MutexObject) */ Status = AcpiExReleaseMutex (Operand[0], WalkState); break; case AML_RESET_OP: /* Reset (EventObject) */ Status = AcpiExSystemResetEvent (Operand[0]); break; case AML_SIGNAL_OP: /* Signal (EventObject) */ Status = AcpiExSystemSignalEvent (Operand[0]); break; case AML_SLEEP_OP: /* Sleep (MsecTime) */ Status = AcpiExSystemDoSleep (Operand[0]->Integer.Value); break; case AML_STALL_OP: /* Stall (UsecTime) */ Status = AcpiExSystemDoStall ((UINT32) Operand[0]->Integer.Value); break; case AML_UNLOAD_OP: /* Unload (Handle) */ Status = AcpiExUnloadTable (Operand[0]); break; default: /* Unknown opcode */ ACPI_ERROR ((AE_INFO, "Unknown AML opcode 0x%X", WalkState->Opcode)); Status = AE_AML_BAD_OPCODE; break; } return_ACPI_STATUS (Status); } #ifdef _OBSOLETE_CODE /* Was originally used for Load() operator */ /******************************************************************************* * * FUNCTION: AcpiExOpcode_1A_1T_0R * * PARAMETERS: WalkState - Current state (contains AML opcode) * * RETURN: Status * * DESCRIPTION: Execute opcode with one argument, one target, and no * return value. * ******************************************************************************/ ACPI_STATUS AcpiExOpcode_1A_1T_0R ( ACPI_WALK_STATE *WalkState) { ACPI_STATUS Status = AE_OK; ACPI_OPERAND_OBJECT **Operand = &WalkState->Operands[0]; ACPI_FUNCTION_TRACE_STR (ExOpcode_1A_1T_0R, AcpiPsGetOpcodeName (WalkState->Opcode)); /* Examine the AML opcode */ switch (WalkState->Opcode) { #ifdef _OBSOLETE_CODE case AML_LOAD_OP: Status = AcpiExLoadOp (Operand[0], Operand[1], WalkState); break; #endif default: /* Unknown opcode */ ACPI_ERROR ((AE_INFO, "Unknown AML opcode 0x%X", WalkState->Opcode)); Status = AE_AML_BAD_OPCODE; goto Cleanup; } Cleanup: return_ACPI_STATUS (Status); } #endif /******************************************************************************* * * FUNCTION: AcpiExOpcode_1A_1T_1R * * PARAMETERS: WalkState - Current state (contains AML opcode) * * RETURN: Status * * DESCRIPTION: Execute opcode with one argument, one target, and a * return value. * January 2022: Added Load operator, with new ACPI 6.4 * semantics. * ******************************************************************************/ ACPI_STATUS AcpiExOpcode_1A_1T_1R ( ACPI_WALK_STATE *WalkState) { ACPI_STATUS Status = AE_OK; ACPI_OPERAND_OBJECT **Operand = &WalkState->Operands[0]; ACPI_OPERAND_OBJECT *ReturnDesc = NULL; ACPI_OPERAND_OBJECT *ReturnDesc2 = NULL; UINT32 Temp32; UINT32 i; UINT64 PowerOfTen; UINT64 Digit; ACPI_FUNCTION_TRACE_STR (ExOpcode_1A_1T_1R, AcpiPsGetOpcodeName (WalkState->Opcode)); /* Examine the AML opcode */ switch (WalkState->Opcode) { case AML_BIT_NOT_OP: case AML_FIND_SET_LEFT_BIT_OP: case AML_FIND_SET_RIGHT_BIT_OP: case AML_FROM_BCD_OP: case AML_LOAD_OP: case AML_TO_BCD_OP: case AML_CONDITIONAL_REF_OF_OP: /* Create a return object of type Integer for these opcodes */ ReturnDesc = AcpiUtCreateInternalObject (ACPI_TYPE_INTEGER); if (!ReturnDesc) { Status = AE_NO_MEMORY; goto Cleanup; } switch (WalkState->Opcode) { case AML_BIT_NOT_OP: /* Not (Operand, Result) */ ReturnDesc->Integer.Value = ~Operand[0]->Integer.Value; break; case AML_FIND_SET_LEFT_BIT_OP: /* FindSetLeftBit (Operand, Result) */ ReturnDesc->Integer.Value = Operand[0]->Integer.Value; /* * Acpi specification describes Integer type as a little * endian unsigned value, so this boundary condition is valid. */ for (Temp32 = 0; ReturnDesc->Integer.Value && Temp32 < ACPI_INTEGER_BIT_SIZE; ++Temp32) { ReturnDesc->Integer.Value >>= 1; } ReturnDesc->Integer.Value = Temp32; break; case AML_FIND_SET_RIGHT_BIT_OP: /* FindSetRightBit (Operand, Result) */ ReturnDesc->Integer.Value = Operand[0]->Integer.Value; /* * The Acpi specification describes Integer type as a little * endian unsigned value, so this boundary condition is valid. */ for (Temp32 = 0; ReturnDesc->Integer.Value && Temp32 < ACPI_INTEGER_BIT_SIZE; ++Temp32) { ReturnDesc->Integer.Value <<= 1; } /* Since the bit position is one-based, subtract from 33 (65) */ ReturnDesc->Integer.Value = Temp32 == 0 ? 0 : (ACPI_INTEGER_BIT_SIZE + 1) - Temp32; break; case AML_FROM_BCD_OP: /* FromBcd (BCDValue, Result) */ /* * The 64-bit ACPI integer can hold 16 4-bit BCD characters * (if table is 32-bit, integer can hold 8 BCD characters) * Convert each 4-bit BCD value */ PowerOfTen = 1; ReturnDesc->Integer.Value = 0; Digit = Operand[0]->Integer.Value; /* Convert each BCD digit (each is one nybble wide) */ for (i = 0; (i < AcpiGbl_IntegerNybbleWidth) && (Digit > 0); i++) { /* Get the least significant 4-bit BCD digit */ Temp32 = ((UINT32) Digit) & 0xF; /* Check the range of the digit */ if (Temp32 > 9) { ACPI_ERROR ((AE_INFO, "BCD digit too large (not decimal): 0x%X", Temp32)); Status = AE_AML_NUMERIC_OVERFLOW; goto Cleanup; } /* Sum the digit into the result with the current power of 10 */ ReturnDesc->Integer.Value += (((UINT64) Temp32) * PowerOfTen); /* Shift to next BCD digit */ Digit >>= 4; /* Next power of 10 */ PowerOfTen *= 10; } break; case AML_LOAD_OP: /* Result1 = Load (Operand[0], Result1) */ ReturnDesc->Integer.Value = 0; Status = AcpiExLoadOp (Operand[0], ReturnDesc, WalkState); if (ACPI_SUCCESS (Status)) { /* Return -1 (non-zero) indicates success */ ReturnDesc->Integer.Value = 0xFFFFFFFFFFFFFFFF; } break; case AML_TO_BCD_OP: /* ToBcd (Operand, Result) */ ReturnDesc->Integer.Value = 0; Digit = Operand[0]->Integer.Value; /* Each BCD digit is one nybble wide */ for (i = 0; (i < AcpiGbl_IntegerNybbleWidth) && (Digit > 0); i++) { (void) AcpiUtShortDivide (Digit, 10, &Digit, &Temp32); /* * Insert the BCD digit that resides in the * remainder from above */ ReturnDesc->Integer.Value |= (((UINT64) Temp32) << ACPI_MUL_4 (i)); } /* Overflow if there is any data left in Digit */ if (Digit > 0) { ACPI_ERROR ((AE_INFO, "Integer too large to convert to BCD: 0x%8.8X%8.8X", ACPI_FORMAT_UINT64 (Operand[0]->Integer.Value))); Status = AE_AML_NUMERIC_OVERFLOW; goto Cleanup; } break; case AML_CONDITIONAL_REF_OF_OP: /* CondRefOf (SourceObject, Result) */ /* * This op is a little strange because the internal return value is * different than the return value stored in the result descriptor * (There are really two return values) */ if ((ACPI_NAMESPACE_NODE *) Operand[0] == AcpiGbl_RootNode) { /* * This means that the object does not exist in the namespace, * return FALSE */ ReturnDesc->Integer.Value = 0; goto Cleanup; } /* Get the object reference, store it, and remove our reference */ Status = AcpiExGetObjectReference (Operand[0], &ReturnDesc2, WalkState); if (ACPI_FAILURE (Status)) { goto Cleanup; } Status = AcpiExStore (ReturnDesc2, Operand[1], WalkState); AcpiUtRemoveReference (ReturnDesc2); /* The object exists in the namespace, return TRUE */ ReturnDesc->Integer.Value = ACPI_UINT64_MAX; goto Cleanup; default: /* No other opcodes get here */ break; } break; case AML_STORE_OP: /* Store (Source, Target) */ /* * A store operand is typically a number, string, buffer or lvalue * Be careful about deleting the source object, * since the object itself may have been stored. */ Status = AcpiExStore (Operand[0], Operand[1], WalkState); if (ACPI_FAILURE (Status)) { return_ACPI_STATUS (Status); } /* It is possible that the Store already produced a return object */ if (!WalkState->ResultObj) { /* * Normally, we would remove a reference on the Operand[0] * parameter; But since it is being used as the internal return * object (meaning we would normally increment it), the two * cancel out, and we simply don't do anything. */ WalkState->ResultObj = Operand[0]; WalkState->Operands[0] = NULL; /* Prevent deletion */ } return_ACPI_STATUS (Status); /* * ACPI 2.0 Opcodes */ case AML_COPY_OBJECT_OP: /* CopyObject (Source, Target) */ Status = AcpiUtCopyIobjectToIobject ( Operand[0], &ReturnDesc, WalkState); break; case AML_TO_DECIMAL_STRING_OP: /* ToDecimalString (Data, Result) */ Status = AcpiExConvertToString ( Operand[0], &ReturnDesc, ACPI_EXPLICIT_CONVERT_DECIMAL); if (ReturnDesc == Operand[0]) { /* No conversion performed, add ref to handle return value */ AcpiUtAddReference (ReturnDesc); } break; case AML_TO_HEX_STRING_OP: /* ToHexString (Data, Result) */ Status = AcpiExConvertToString ( Operand[0], &ReturnDesc, ACPI_EXPLICIT_CONVERT_HEX); if (ReturnDesc == Operand[0]) { /* No conversion performed, add ref to handle return value */ AcpiUtAddReference (ReturnDesc); } break; case AML_TO_BUFFER_OP: /* ToBuffer (Data, Result) */ Status = AcpiExConvertToBuffer (Operand[0], &ReturnDesc); if (ReturnDesc == Operand[0]) { /* No conversion performed, add ref to handle return value */ AcpiUtAddReference (ReturnDesc); } break; case AML_TO_INTEGER_OP: /* ToInteger (Data, Result) */ /* Perform "explicit" conversion */ Status = AcpiExConvertToInteger (Operand[0], &ReturnDesc, 0); if (ReturnDesc == Operand[0]) { /* No conversion performed, add ref to handle return value */ AcpiUtAddReference (ReturnDesc); } break; case AML_SHIFT_LEFT_BIT_OP: /* ShiftLeftBit (Source, BitNum) */ case AML_SHIFT_RIGHT_BIT_OP: /* ShiftRightBit (Source, BitNum) */ /* These are two obsolete opcodes */ ACPI_ERROR ((AE_INFO, "%s is obsolete and not implemented", AcpiPsGetOpcodeName (WalkState->Opcode))); Status = AE_SUPPORT; goto Cleanup; default: /* Unknown opcode */ ACPI_ERROR ((AE_INFO, "Unknown AML opcode 0x%X", WalkState->Opcode)); Status = AE_AML_BAD_OPCODE; goto Cleanup; } if (ACPI_SUCCESS (Status)) { /* Store the return value computed above into the target object */ Status = AcpiExStore (ReturnDesc, Operand[1], WalkState); } Cleanup: /* Delete return object on error */ if (ACPI_FAILURE (Status)) { AcpiUtRemoveReference (ReturnDesc); } /* Save return object on success */ else if (!WalkState->ResultObj) { WalkState->ResultObj = ReturnDesc; } return_ACPI_STATUS (Status); } /******************************************************************************* * * FUNCTION: AcpiExOpcode_1A_0T_1R * * PARAMETERS: WalkState - Current state (contains AML opcode) * * RETURN: Status * * DESCRIPTION: Execute opcode with one argument, no target, and a return value * ******************************************************************************/ ACPI_STATUS AcpiExOpcode_1A_0T_1R ( ACPI_WALK_STATE *WalkState) { ACPI_OPERAND_OBJECT **Operand = &WalkState->Operands[0]; ACPI_OPERAND_OBJECT *TempDesc; ACPI_OPERAND_OBJECT *ReturnDesc = NULL; ACPI_STATUS Status = AE_OK; UINT32 Type; UINT64 Value; ACPI_FUNCTION_TRACE_STR (ExOpcode_1A_0T_1R, AcpiPsGetOpcodeName (WalkState->Opcode)); /* Examine the AML opcode */ switch (WalkState->Opcode) { case AML_LOGICAL_NOT_OP: /* LNot (Operand) */ ReturnDesc = AcpiUtCreateIntegerObject ((UINT64) 0); if (!ReturnDesc) { Status = AE_NO_MEMORY; goto Cleanup; } /* * Set result to ONES (TRUE) if Value == 0. Note: * ReturnDesc->Integer.Value is initially == 0 (FALSE) from above. */ if (!Operand[0]->Integer.Value) { ReturnDesc->Integer.Value = ACPI_UINT64_MAX; } break; case AML_DECREMENT_OP: /* Decrement (Operand) */ case AML_INCREMENT_OP: /* Increment (Operand) */ /* * Create a new integer. Can't just get the base integer and * increment it because it may be an Arg or Field. */ ReturnDesc = AcpiUtCreateInternalObject (ACPI_TYPE_INTEGER); if (!ReturnDesc) { Status = AE_NO_MEMORY; goto Cleanup; } /* * Since we are expecting a Reference operand, it can be either a * NS Node or an internal object. */ TempDesc = Operand[0]; if (ACPI_GET_DESCRIPTOR_TYPE (TempDesc) == ACPI_DESC_TYPE_OPERAND) { /* Internal reference object - prevent deletion */ AcpiUtAddReference (TempDesc); } /* * Convert the Reference operand to an Integer (This removes a * reference on the Operand[0] object) * * NOTE: We use LNOT_OP here in order to force resolution of the * reference operand to an actual integer. */ Status = AcpiExResolveOperands (AML_LOGICAL_NOT_OP, &TempDesc, WalkState); if (ACPI_FAILURE (Status)) { ACPI_EXCEPTION ((AE_INFO, Status, "While resolving operands for [%s]", AcpiPsGetOpcodeName (WalkState->Opcode))); goto Cleanup; } /* * TempDesc is now guaranteed to be an Integer object -- * Perform the actual increment or decrement */ if (WalkState->Opcode == AML_INCREMENT_OP) { ReturnDesc->Integer.Value = TempDesc->Integer.Value + 1; } else { ReturnDesc->Integer.Value = TempDesc->Integer.Value - 1; } /* Finished with this Integer object */ AcpiUtRemoveReference (TempDesc); /* * Store the result back (indirectly) through the original * Reference object */ Status = AcpiExStore (ReturnDesc, Operand[0], WalkState); break; case AML_OBJECT_TYPE_OP: /* ObjectType (SourceObject) */ /* * Note: The operand is not resolved at this point because we want to * get the associated object, not its value. For example, we don't * want to resolve a FieldUnit to its value, we want the actual * FieldUnit object. */ /* Get the type of the base object */ Status = AcpiExResolveMultiple (WalkState, Operand[0], &Type, NULL); if (ACPI_FAILURE (Status)) { goto Cleanup; } /* Allocate a descriptor to hold the type. */ ReturnDesc = AcpiUtCreateIntegerObject ((UINT64) Type); if (!ReturnDesc) { Status = AE_NO_MEMORY; goto Cleanup; } break; case AML_SIZE_OF_OP: /* SizeOf (SourceObject) */ /* * Note: The operand is not resolved at this point because we want to * get the associated object, not its value. */ /* Get the base object */ Status = AcpiExResolveMultiple ( WalkState, Operand[0], &Type, &TempDesc); if (ACPI_FAILURE (Status)) { goto Cleanup; } /* * The type of the base object must be integer, buffer, string, or * package. All others are not supported. * * NOTE: Integer is not specifically supported by the ACPI spec, * but is supported implicitly via implicit operand conversion. * rather than bother with conversion, we just use the byte width * global (4 or 8 bytes). */ switch (Type) { case ACPI_TYPE_INTEGER: Value = AcpiGbl_IntegerByteWidth; break; case ACPI_TYPE_STRING: Value = TempDesc->String.Length; break; case ACPI_TYPE_BUFFER: /* Buffer arguments may not be evaluated at this point */ Status = AcpiDsGetBufferArguments (TempDesc); Value = TempDesc->Buffer.Length; break; case ACPI_TYPE_PACKAGE: /* Package arguments may not be evaluated at this point */ Status = AcpiDsGetPackageArguments (TempDesc); Value = TempDesc->Package.Count; break; default: ACPI_ERROR ((AE_INFO, "Operand must be Buffer/Integer/String/Package" " - found type %s", AcpiUtGetTypeName (Type))); Status = AE_AML_OPERAND_TYPE; goto Cleanup; } if (ACPI_FAILURE (Status)) { goto Cleanup; } /* * Now that we have the size of the object, create a result * object to hold the value */ ReturnDesc = AcpiUtCreateIntegerObject (Value); if (!ReturnDesc) { Status = AE_NO_MEMORY; goto Cleanup; } break; case AML_REF_OF_OP: /* RefOf (SourceObject) */ Status = AcpiExGetObjectReference ( Operand[0], &ReturnDesc, WalkState); if (ACPI_FAILURE (Status)) { goto Cleanup; } break; case AML_DEREF_OF_OP: /* DerefOf (ObjReference | String) */ /* Check for a method local or argument, or standalone String */ if (ACPI_GET_DESCRIPTOR_TYPE (Operand[0]) == ACPI_DESC_TYPE_NAMED) { TempDesc = AcpiNsGetAttachedObject ( (ACPI_NAMESPACE_NODE *) Operand[0]); if (TempDesc && ((TempDesc->Common.Type == ACPI_TYPE_STRING) || (TempDesc->Common.Type == ACPI_TYPE_LOCAL_REFERENCE))) { Operand[0] = TempDesc; AcpiUtAddReference (TempDesc); } else { Status = AE_AML_OPERAND_TYPE; goto Cleanup; } } else { switch ((Operand[0])->Common.Type) { case ACPI_TYPE_LOCAL_REFERENCE: /* * This is a DerefOf (LocalX | ArgX) * * Must resolve/dereference the local/arg reference first */ switch (Operand[0]->Reference.Class) { case ACPI_REFCLASS_LOCAL: case ACPI_REFCLASS_ARG: /* Set Operand[0] to the value of the local/arg */ Status = AcpiDsMethodDataGetValue ( Operand[0]->Reference.Class, Operand[0]->Reference.Value, WalkState, &TempDesc); if (ACPI_FAILURE (Status)) { goto Cleanup; } /* * Delete our reference to the input object and * point to the object just retrieved */ AcpiUtRemoveReference (Operand[0]); Operand[0] = TempDesc; break; case ACPI_REFCLASS_REFOF: /* Get the object to which the reference refers */ TempDesc = Operand[0]->Reference.Object; AcpiUtRemoveReference (Operand[0]); Operand[0] = TempDesc; break; default: /* Must be an Index op - handled below */ break; } break; case ACPI_TYPE_STRING: break; default: Status = AE_AML_OPERAND_TYPE; goto Cleanup; } } if (ACPI_GET_DESCRIPTOR_TYPE (Operand[0]) != ACPI_DESC_TYPE_NAMED) { if ((Operand[0])->Common.Type == ACPI_TYPE_STRING) { /* * This is a DerefOf (String). The string is a reference * to a named ACPI object. * * 1) Find the owning Node * 2) Dereference the node to an actual object. Could be a * Field, so we need to resolve the node to a value. */ Status = AcpiNsGetNodeUnlocked (WalkState->ScopeInfo->Scope.Node, Operand[0]->String.Pointer, ACPI_NS_SEARCH_PARENT, ACPI_CAST_INDIRECT_PTR ( ACPI_NAMESPACE_NODE, &ReturnDesc)); if (ACPI_FAILURE (Status)) { goto Cleanup; } Status = AcpiExResolveNodeToValue ( ACPI_CAST_INDIRECT_PTR ( ACPI_NAMESPACE_NODE, &ReturnDesc), WalkState); goto Cleanup; } } /* Operand[0] may have changed from the code above */ if (ACPI_GET_DESCRIPTOR_TYPE (Operand[0]) == ACPI_DESC_TYPE_NAMED) { /* * This is a DerefOf (ObjectReference) * Get the actual object from the Node (This is the dereference). * This case may only happen when a LocalX or ArgX is * dereferenced above, or for references to device and * thermal objects. */ switch (((ACPI_NAMESPACE_NODE *) Operand[0])->Type) { case ACPI_TYPE_DEVICE: case ACPI_TYPE_THERMAL: /* These types have no node subobject, return the NS node */ ReturnDesc = Operand[0]; break; default: /* For most types, get the object attached to the node */ ReturnDesc = AcpiNsGetAttachedObject ( (ACPI_NAMESPACE_NODE *) Operand[0]); AcpiUtAddReference (ReturnDesc); break; } } else { /* * This must be a reference object produced by either the * Index() or RefOf() operator */ switch (Operand[0]->Reference.Class) { case ACPI_REFCLASS_INDEX: /* * The target type for the Index operator must be * either a Buffer or a Package */ switch (Operand[0]->Reference.TargetType) { case ACPI_TYPE_BUFFER_FIELD: TempDesc = Operand[0]->Reference.Object; /* * Create a new object that contains one element of the * buffer -- the element pointed to by the index. * * NOTE: index into a buffer is NOT a pointer to a * sub-buffer of the main buffer, it is only a pointer to a * single element (byte) of the buffer! * * Since we are returning the value of the buffer at the * indexed location, we don't need to add an additional * reference to the buffer itself. */ ReturnDesc = AcpiUtCreateIntegerObject ((UINT64) TempDesc->Buffer.Pointer[Operand[0]->Reference.Value]); if (!ReturnDesc) { Status = AE_NO_MEMORY; goto Cleanup; } break; case ACPI_TYPE_PACKAGE: /* * Return the referenced element of the package. We must * add another reference to the referenced object, however. */ ReturnDesc = *(Operand[0]->Reference.Where); if (!ReturnDesc) { /* * Element is NULL, do not allow the dereference. * This provides compatibility with other ACPI * implementations. */ return_ACPI_STATUS (AE_AML_UNINITIALIZED_ELEMENT); } AcpiUtAddReference (ReturnDesc); break; default: ACPI_ERROR ((AE_INFO, "Unknown Index TargetType 0x%X in reference object %p", Operand[0]->Reference.TargetType, Operand[0])); Status = AE_AML_OPERAND_TYPE; goto Cleanup; } break; case ACPI_REFCLASS_REFOF: ReturnDesc = Operand[0]->Reference.Object; if (ACPI_GET_DESCRIPTOR_TYPE (ReturnDesc) == ACPI_DESC_TYPE_NAMED) { ReturnDesc = AcpiNsGetAttachedObject ( (ACPI_NAMESPACE_NODE *) ReturnDesc); if (!ReturnDesc) { break; } /* * June 2013: * BufferFields/FieldUnits require additional resolution */ switch (ReturnDesc->Common.Type) { case ACPI_TYPE_BUFFER_FIELD: case ACPI_TYPE_LOCAL_REGION_FIELD: case ACPI_TYPE_LOCAL_BANK_FIELD: case ACPI_TYPE_LOCAL_INDEX_FIELD: Status = AcpiExReadDataFromField ( WalkState, ReturnDesc, &TempDesc); if (ACPI_FAILURE (Status)) { return_ACPI_STATUS (Status); } ReturnDesc = TempDesc; break; default: /* Add another reference to the object */ AcpiUtAddReference (ReturnDesc); break; } } break; default: ACPI_ERROR ((AE_INFO, "Unknown class in reference(%p) - 0x%2.2X", Operand[0], Operand[0]->Reference.Class)); Status = AE_TYPE; goto Cleanup; } } break; default: ACPI_ERROR ((AE_INFO, "Unknown AML opcode 0x%X", WalkState->Opcode)); Status = AE_AML_BAD_OPCODE; goto Cleanup; } Cleanup: /* Delete return object on error */ if (ACPI_FAILURE (Status)) { AcpiUtRemoveReference (ReturnDesc); } /* Save return object on success */ else { WalkState->ResultObj = ReturnDesc; } return_ACPI_STATUS (Status); }