/****************************************************************************** * * Module Name: aslopt- Compiler optimizations * *****************************************************************************/ /* * Copyright (C) 2000 - 2015, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */ #include #include "aslcompiler.y.h" #include #include #include #define _COMPONENT ACPI_COMPILER ACPI_MODULE_NAME ("aslopt") static UINT32 OptTotal = 0; /* Local prototypes */ static ACPI_STATUS OptSearchToRoot ( ACPI_PARSE_OBJECT *Op, ACPI_WALK_STATE *WalkState, ACPI_NAMESPACE_NODE *CurrentNode, ACPI_NAMESPACE_NODE *TargetNode, ACPI_BUFFER *TargetPath, char **NewPath); static ACPI_STATUS OptBuildShortestPath ( ACPI_PARSE_OBJECT *Op, ACPI_WALK_STATE *WalkState, ACPI_NAMESPACE_NODE *CurrentNode, ACPI_NAMESPACE_NODE *TargetNode, ACPI_BUFFER *CurrentPath, ACPI_BUFFER *TargetPath, ACPI_SIZE AmlNameStringLength, UINT8 IsDeclaration, char **ReturnNewPath); static ACPI_STATUS OptOptimizeNameDeclaration ( ACPI_PARSE_OBJECT *Op, ACPI_WALK_STATE *WalkState, ACPI_NAMESPACE_NODE *CurrentNode, ACPI_NAMESPACE_NODE *TargetNode, char *AmlNameString, char **NewPath); /******************************************************************************* * * FUNCTION: OptSearchToRoot * * PARAMETERS: Op - Current parser op * WalkState - Current state * CurrentNode - Where we are in the namespace * TargetNode - Node to which we are referring * TargetPath - External full path to the target node * NewPath - Where the optimized path is returned * * RETURN: Status * * DESCRIPTION: Attempt to optimize a reference to a single 4-character ACPI * name utilizing the search-to-root name resolution algorithm * that is used by AML interpreters. * ******************************************************************************/ static ACPI_STATUS OptSearchToRoot ( ACPI_PARSE_OBJECT *Op, ACPI_WALK_STATE *WalkState, ACPI_NAMESPACE_NODE *CurrentNode, ACPI_NAMESPACE_NODE *TargetNode, ACPI_BUFFER *TargetPath, char **NewPath) { ACPI_NAMESPACE_NODE *Node; ACPI_GENERIC_STATE ScopeInfo; ACPI_STATUS Status; char *Path; ACPI_FUNCTION_NAME (OptSearchToRoot); /* * Check if search-to-root can be utilized. Use the last NameSeg of * the NamePath and 1) See if can be found and 2) If found, make * sure that it is the same node that we want. If there is another * name in the search path before the one we want, the nodes will * not match, and we cannot use this optimization. */ Path = &(((char *) TargetPath->Pointer)[TargetPath->Length - ACPI_NAME_SIZE]), ScopeInfo.Scope.Node = CurrentNode; /* Lookup the NameSeg using SEARCH_PARENT (search-to-root) */ Status = AcpiNsLookup (&ScopeInfo, Path, ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT | ACPI_NS_DONT_OPEN_SCOPE, WalkState, &(Node)); if (ACPI_FAILURE (Status)) { return (Status); } /* * We found the name, but we must check to make sure that the node * matches. Otherwise, there is another identical name in the search * path that precludes the use of this optimization. */ if (Node != TargetNode) { /* * This means that another object with the same name was found first, * and we cannot use this optimization. */ return (AE_NOT_FOUND); } /* Found the node, we can use this optimization */ ACPI_DEBUG_PRINT_RAW ((ACPI_DB_OPTIMIZATIONS, "NAMESEG: %-24s", Path)); /* We must allocate a new string for the name (TargetPath gets deleted) */ *NewPath = UtStringCacheCalloc (ACPI_NAME_SIZE + 1); strcpy (*NewPath, Path); if (strncmp (*NewPath, "_T_", 3)) { AslError (ASL_OPTIMIZATION, ASL_MSG_SINGLE_NAME_OPTIMIZATION, Op, *NewPath); } return (AE_OK); } /******************************************************************************* * * FUNCTION: OptBuildShortestPath * * PARAMETERS: Op - Current parser op * WalkState - Current state * CurrentNode - Where we are in the namespace * TargetNode - Node to which we are referring * CurrentPath - External full path to the current node * TargetPath - External full path to the target node * AmlNameStringLength - Length of the original namepath * IsDeclaration - TRUE for declaration, FALSE for reference * ReturnNewPath - Where the optimized path is returned * * RETURN: Status * * DESCRIPTION: Build an optimal NamePath using carats * ******************************************************************************/ static ACPI_STATUS OptBuildShortestPath ( ACPI_PARSE_OBJECT *Op, ACPI_WALK_STATE *WalkState, ACPI_NAMESPACE_NODE *CurrentNode, ACPI_NAMESPACE_NODE *TargetNode, ACPI_BUFFER *CurrentPath, ACPI_BUFFER *TargetPath, ACPI_SIZE AmlNameStringLength, UINT8 IsDeclaration, char **ReturnNewPath) { UINT32 NumCommonSegments; UINT32 MaxCommonSegments; UINT32 Index; UINT32 NumCarats; UINT32 i; char *NewPath; char *NewPathExternal; ACPI_NAMESPACE_NODE *Node; ACPI_GENERIC_STATE ScopeInfo; ACPI_STATUS Status; BOOLEAN SubPath = FALSE; ACPI_FUNCTION_NAME (OptBuildShortestPath); ScopeInfo.Scope.Node = CurrentNode; /* * Determine the maximum number of NameSegs that the Target and Current paths * can possibly have in common. (To optimize, we have to have at least 1) * * Note: The external NamePath string lengths are always a multiple of 5 * (ACPI_NAME_SIZE + separator) */ MaxCommonSegments = TargetPath->Length / ACPI_PATH_SEGMENT_LENGTH; if (CurrentPath->Length < TargetPath->Length) { MaxCommonSegments = CurrentPath->Length / ACPI_PATH_SEGMENT_LENGTH; } /* * Determine how many NameSegs the two paths have in common. * (Starting from the root) */ for (NumCommonSegments = 0; NumCommonSegments < MaxCommonSegments; NumCommonSegments++) { /* Compare two single NameSegs */ if (!ACPI_COMPARE_NAME ( &((char *) TargetPath->Pointer)[ (NumCommonSegments * ACPI_PATH_SEGMENT_LENGTH) + 1], &((char *) CurrentPath->Pointer)[ (NumCommonSegments * ACPI_PATH_SEGMENT_LENGTH) + 1])) { /* Mismatch */ break; } } ACPI_DEBUG_PRINT_RAW ((ACPI_DB_OPTIMIZATIONS, " COMMON: %u", NumCommonSegments)); /* There must be at least 1 common NameSeg in order to optimize */ if (NumCommonSegments == 0) { return (AE_NOT_FOUND); } if (NumCommonSegments == MaxCommonSegments) { if (CurrentPath->Length == TargetPath->Length) { ACPI_DEBUG_PRINT_RAW ((ACPI_DB_OPTIMIZATIONS, " SAME PATH")); return (AE_NOT_FOUND); } else { ACPI_DEBUG_PRINT_RAW ((ACPI_DB_OPTIMIZATIONS, " SUBPATH")); SubPath = TRUE; } } /* Determine how many prefix Carats are required */ NumCarats = (CurrentPath->Length / ACPI_PATH_SEGMENT_LENGTH) - NumCommonSegments; /* * Construct a new target string */ NewPathExternal = ACPI_ALLOCATE_ZEROED ( TargetPath->Length + NumCarats + 1); /* Insert the Carats into the Target string */ for (i = 0; i < NumCarats; i++) { NewPathExternal[i] = AML_PARENT_PREFIX; } /* * Copy only the necessary (optimal) segments from the original * target string */ Index = (NumCommonSegments * ACPI_PATH_SEGMENT_LENGTH) + 1; /* Special handling for exact subpath in a name declaration */ if (IsDeclaration && SubPath && (CurrentPath->Length > TargetPath->Length)) { /* * The current path is longer than the target, and the target is a * subpath of the current path. We must include one more NameSeg of * the target path */ Index -= ACPI_PATH_SEGMENT_LENGTH; /* Special handling for Scope() operator */ if (Op->Asl.AmlOpcode == AML_SCOPE_OP) { NewPathExternal[i] = AML_PARENT_PREFIX; i++; ACPI_DEBUG_PRINT_RAW ((ACPI_DB_OPTIMIZATIONS, "(EXTRA ^)")); } } /* Make sure we haven't gone off the end of the target path */ if (Index > TargetPath->Length) { Index = TargetPath->Length; } strcpy (&NewPathExternal[i], &((char *) TargetPath->Pointer)[Index]); ACPI_DEBUG_PRINT_RAW ((ACPI_DB_OPTIMIZATIONS, " %-24s", NewPathExternal)); /* * Internalize the new target string and check it against the original * string to make sure that this is in fact an optimization. If the * original string is already optimal, there is no point in continuing. */ Status = AcpiNsInternalizeName (NewPathExternal, &NewPath); if (ACPI_FAILURE (Status)) { AslCoreSubsystemError (Op, Status, "Internalizing new NamePath", ASL_NO_ABORT); ACPI_FREE (NewPathExternal); return (Status); } if (strlen (NewPath) >= AmlNameStringLength) { ACPI_DEBUG_PRINT_RAW ((ACPI_DB_OPTIMIZATIONS, " NOT SHORTER (New %u old %u)", (UINT32) strlen (NewPath), (UINT32) AmlNameStringLength)); ACPI_FREE (NewPathExternal); return (AE_NOT_FOUND); } /* * Check to make sure that the optimization finds the node we are * looking for. This is simply a sanity check on the new * path that has been created. */ Status = AcpiNsLookup (&ScopeInfo, NewPath, ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE, ACPI_NS_DONT_OPEN_SCOPE, WalkState, &(Node)); if (ACPI_SUCCESS (Status)) { /* Found the namepath, but make sure the node is correct */ if (Node == TargetNode) { /* The lookup matched the node, accept this optimization */ AslError (ASL_OPTIMIZATION, ASL_MSG_NAME_OPTIMIZATION, Op, NewPathExternal); *ReturnNewPath = NewPath; } else { /* Node is not correct, do not use this optimization */ Status = AE_NOT_FOUND; ACPI_DEBUG_PRINT_RAW ((ACPI_DB_OPTIMIZATIONS, " ***** WRONG NODE")); AslError (ASL_WARNING, ASL_MSG_COMPILER_INTERNAL, Op, "Not using optimized name - found wrong node"); } } else { /* The lookup failed, we obviously cannot use this optimization */ ACPI_DEBUG_PRINT_RAW ((ACPI_DB_OPTIMIZATIONS, " ***** NOT FOUND")); AslError (ASL_WARNING, ASL_MSG_COMPILER_INTERNAL, Op, "Not using optimized name - did not find node"); } ACPI_FREE (NewPathExternal); return (Status); } /******************************************************************************* * * FUNCTION: OptOptimizeNameDeclaration * * PARAMETERS: Op - Current parser op * WalkState - Current state * CurrentNode - Where we are in the namespace * AmlNameString - Unoptimized namepath * NewPath - Where the optimized path is returned * * RETURN: Status. AE_OK If path is optimized * * DESCRIPTION: Perform a simple optimization of removing an extraneous * backslash prefix if we are already at the root scope. * ******************************************************************************/ static ACPI_STATUS OptOptimizeNameDeclaration ( ACPI_PARSE_OBJECT *Op, ACPI_WALK_STATE *WalkState, ACPI_NAMESPACE_NODE *CurrentNode, ACPI_NAMESPACE_NODE *TargetNode, char *AmlNameString, char **NewPath) { ACPI_STATUS Status; char *NewPathExternal; ACPI_NAMESPACE_NODE *Node; ACPI_FUNCTION_TRACE (OptOptimizeNameDeclaration); if (((CurrentNode == AcpiGbl_RootNode) || (Op->Common.Parent->Asl.ParseOpcode == PARSEOP_DEFINITIONBLOCK)) && (ACPI_IS_ROOT_PREFIX (AmlNameString[0]))) { /* * The current scope is the root, and the namepath has a root prefix * that is therefore extraneous. Remove it. */ *NewPath = &AmlNameString[1]; /* Debug output */ Status = AcpiNsExternalizeName (ACPI_UINT32_MAX, *NewPath, NULL, &NewPathExternal); if (ACPI_FAILURE (Status)) { AslCoreSubsystemError (Op, Status, "Externalizing NamePath", ASL_NO_ABORT); return (Status); } /* * Check to make sure that the optimization finds the node we are * looking for. This is simply a sanity check on the new * path that has been created. * * We know that we are at the root, so NULL is used for the scope. */ Status = AcpiNsLookup (NULL, *NewPath, ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE, ACPI_NS_DONT_OPEN_SCOPE, WalkState, &(Node)); if (ACPI_SUCCESS (Status)) { /* Found the namepath, but make sure the node is correct */ if (Node == TargetNode) { /* The lookup matched the node, accept this optimization */ AslError (ASL_OPTIMIZATION, ASL_MSG_NAME_OPTIMIZATION, Op, NewPathExternal); ACPI_DEBUG_PRINT_RAW ((ACPI_DB_OPTIMIZATIONS, "AT ROOT: %-24s", NewPathExternal)); } else { /* Node is not correct, do not use this optimization */ Status = AE_NOT_FOUND; ACPI_DEBUG_PRINT_RAW ((ACPI_DB_OPTIMIZATIONS, " ***** WRONG NODE")); AslError (ASL_WARNING, ASL_MSG_COMPILER_INTERNAL, Op, "Not using optimized name - found wrong node"); } } else { /* The lookup failed, we obviously cannot use this optimization */ ACPI_DEBUG_PRINT_RAW ((ACPI_DB_OPTIMIZATIONS, " ***** NOT FOUND")); AslError (ASL_WARNING, ASL_MSG_COMPILER_INTERNAL, Op, "Not using optimized name - did not find node"); } ACPI_FREE (NewPathExternal); return (Status); } /* Could not optimize */ return (AE_NOT_FOUND); } /******************************************************************************* * * FUNCTION: OptOptimizeNamePath * * PARAMETERS: Op - Current parser op * Flags - Opcode info flags * WalkState - Current state * AmlNameString - Unoptimized namepath * TargetNode - Node to which AmlNameString refers * * RETURN: None. If path is optimized, the Op is updated with new path * * DESCRIPTION: Optimize a Named Declaration or Reference to the minimal length. * Must take into account both the current location in the * namespace and the actual reference path. * ******************************************************************************/ void OptOptimizeNamePath ( ACPI_PARSE_OBJECT *Op, UINT32 Flags, ACPI_WALK_STATE *WalkState, char *AmlNameString, ACPI_NAMESPACE_NODE *TargetNode) { ACPI_STATUS Status; ACPI_BUFFER TargetPath; ACPI_BUFFER CurrentPath; ACPI_SIZE AmlNameStringLength; ACPI_NAMESPACE_NODE *CurrentNode; char *ExternalNameString; char *NewPath = NULL; ACPI_SIZE HowMuchShorter; ACPI_PARSE_OBJECT *NextOp; ACPI_FUNCTION_TRACE (OptOptimizeNamePath); /* This is an optional optimization */ if (!Gbl_ReferenceOptimizationFlag) { return_VOID; } /* Various required items */ if (!TargetNode || !WalkState || !AmlNameString || !Op->Common.Parent) { return_VOID; } ACPI_DEBUG_PRINT_RAW ((ACPI_DB_OPTIMIZATIONS, "PATH OPTIMIZE: Line %5d ParentOp [%12.12s] ThisOp [%12.12s] ", Op->Asl.LogicalLineNumber, AcpiPsGetOpcodeName (Op->Common.Parent->Common.AmlOpcode), AcpiPsGetOpcodeName (Op->Common.AmlOpcode))); if (!(Flags & (AML_NAMED | AML_CREATE))) { if (Op->Asl.CompileFlags & NODE_IS_NAME_DECLARATION) { /* We don't want to fuss with actual name declaration nodes here */ ACPI_DEBUG_PRINT_RAW ((ACPI_DB_OPTIMIZATIONS, "******* NAME DECLARATION\n")); return_VOID; } } /* * The original path must be longer than one NameSeg (4 chars) for there * to be any possibility that it can be optimized to a shorter string */ AmlNameStringLength = strlen (AmlNameString); if (AmlNameStringLength <= ACPI_NAME_SIZE) { ACPI_DEBUG_PRINT_RAW ((ACPI_DB_OPTIMIZATIONS, "NAMESEG %4.4s\n", AmlNameString)); return_VOID; } /* * We need to obtain the node that represents the current scope -- where * we are right now in the namespace. We will compare this path * against the Namepath, looking for commonality. */ CurrentNode = AcpiGbl_RootNode; if (WalkState->ScopeInfo) { CurrentNode = WalkState->ScopeInfo->Scope.Node; } if (Flags & (AML_NAMED | AML_CREATE)) { /* This is the declaration of a new name */ ACPI_DEBUG_PRINT_RAW ((ACPI_DB_OPTIMIZATIONS, "NAME\n")); /* * The node of interest is the parent of this node (the containing * scope). The actual namespace node may be up more than one level * of parse op or it may not exist at all (if we traverse back * up to the root.) */ NextOp = Op->Asl.Parent; while (NextOp && (!NextOp->Asl.Node)) { NextOp = NextOp->Asl.Parent; } if (NextOp && NextOp->Asl.Node) { CurrentNode = NextOp->Asl.Node; } else { CurrentNode = AcpiGbl_RootNode; } } else { /* This is a reference to an existing named object */ ACPI_DEBUG_PRINT_RAW ((ACPI_DB_OPTIMIZATIONS, "REFERENCE\n")); } /* * Obtain the full paths to the two nodes that we are interested in * (Target and current namespace location) in external * format -- something we can easily manipulate */ TargetPath.Length = ACPI_ALLOCATE_LOCAL_BUFFER; Status = AcpiNsHandleToPathname (TargetNode, &TargetPath, FALSE); if (ACPI_FAILURE (Status)) { AslCoreSubsystemError (Op, Status, "Getting Target NamePath", ASL_NO_ABORT); return_VOID; } TargetPath.Length--; /* Subtract one for null terminator */ /* CurrentPath is the path to this scope (where we are in the namespace) */ CurrentPath.Length = ACPI_ALLOCATE_LOCAL_BUFFER; Status = AcpiNsHandleToPathname (CurrentNode, &CurrentPath, FALSE); if (ACPI_FAILURE (Status)) { AslCoreSubsystemError (Op, Status, "Getting Current NamePath", ASL_NO_ABORT); return_VOID; } CurrentPath.Length--; /* Subtract one for null terminator */ /* Debug output only */ Status = AcpiNsExternalizeName (ACPI_UINT32_MAX, AmlNameString, NULL, &ExternalNameString); if (ACPI_FAILURE (Status)) { AslCoreSubsystemError (Op, Status, "Externalizing NamePath", ASL_NO_ABORT); return_VOID; } ACPI_DEBUG_PRINT_RAW ((ACPI_DB_OPTIMIZATIONS, "CURRENT SCOPE: (%2u) %-37s FULL PATH TO NAME: (%2u) %-32s ACTUAL AML:%-32s\n", (UINT32) CurrentPath.Length, (char *) CurrentPath.Pointer, (UINT32) TargetPath.Length, (char *) TargetPath.Pointer, ExternalNameString)); ACPI_FREE (ExternalNameString); /* * Attempt an optmization depending on the type of namepath */ if (Flags & (AML_NAMED | AML_CREATE)) { /* * This is a named opcode and the namepath is a name declaration, not * a reference. */ Status = OptOptimizeNameDeclaration (Op, WalkState, CurrentNode, TargetNode, AmlNameString, &NewPath); if (ACPI_FAILURE (Status)) { /* * 2) now attempt to * optimize the namestring with carats (up-arrow) */ Status = OptBuildShortestPath (Op, WalkState, CurrentNode, TargetNode, &CurrentPath, &TargetPath, AmlNameStringLength, 1, &NewPath); } } else { /* * This is a reference to an existing named object * * 1) Check if search-to-root can be utilized using the last * NameSeg of the NamePath */ Status = OptSearchToRoot (Op, WalkState, CurrentNode, TargetNode, &TargetPath, &NewPath); if (ACPI_FAILURE (Status)) { /* * 2) Search-to-root could not be used, now attempt to * optimize the namestring with carats (up-arrow) */ Status = OptBuildShortestPath (Op, WalkState, CurrentNode, TargetNode, &CurrentPath, &TargetPath, AmlNameStringLength, 0, &NewPath); } } /* * Success from above indicates that the NamePath was successfully * optimized. We need to update the parse op with the new name */ if (ACPI_SUCCESS (Status)) { HowMuchShorter = (AmlNameStringLength - strlen (NewPath)); OptTotal += HowMuchShorter; ACPI_DEBUG_PRINT_RAW ((ACPI_DB_OPTIMIZATIONS, " REDUCED BY %2u (TOTAL SAVED %2u)", (UINT32) HowMuchShorter, OptTotal)); if (Flags & AML_NAMED) { if (Op->Asl.AmlOpcode == AML_ALIAS_OP) { /* * ALIAS is the only oddball opcode, the name declaration * (alias name) is the second operand */ Op->Asl.Child->Asl.Next->Asl.Value.String = NewPath; Op->Asl.Child->Asl.Next->Asl.AmlLength = strlen (NewPath); } else { Op->Asl.Child->Asl.Value.String = NewPath; Op->Asl.Child->Asl.AmlLength = strlen (NewPath); } } else if (Flags & AML_CREATE) { /* Name must appear as the last parameter */ NextOp = Op->Asl.Child; while (!(NextOp->Asl.CompileFlags & NODE_IS_NAME_DECLARATION)) { NextOp = NextOp->Asl.Next; } /* Update the parse node with the new NamePath */ NextOp->Asl.Value.String = NewPath; NextOp->Asl.AmlLength = strlen (NewPath); } else { /* Update the parse node with the new NamePath */ Op->Asl.Value.String = NewPath; Op->Asl.AmlLength = strlen (NewPath); } } else { ACPI_DEBUG_PRINT_RAW ((ACPI_DB_OPTIMIZATIONS, " ALREADY OPTIMAL")); } /* Cleanup path buffers */ ACPI_FREE (TargetPath.Pointer); ACPI_FREE (CurrentPath.Pointer); ACPI_DEBUG_PRINT_RAW ((ACPI_DB_OPTIMIZATIONS, "\n")); return_VOID; }