/* $FreeBSD$ */ /*- * Copyright (c) 2007 Luigi Rizzo - Universita` di Pisa. All rights reserved. * Copyright (c) 2007 Hans Petter Selasky. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef _USB_COMPAT_LINUX_H #define _USB_COMPAT_LINUX_H #include #include #include #include #include #include #include #include struct usb_device; struct usb_interface; struct usb_driver; struct urb; typedef void (usb_complete_t)(struct urb *); #define USB_MAX_FULL_SPEED_ISOC_FRAMES (60 * 1) #define USB_MAX_HIGH_SPEED_ISOC_FRAMES (60 * 8) #define USB_DEVICE_ID_MATCH_DEVICE \ (USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT) #define USB_DEVICE(vend,prod) \ .match_flags = USB_DEVICE_ID_MATCH_DEVICE, .idVendor = (vend), \ .idProduct = (prod) /* The "usb_driver" structure holds the Linux USB device driver * callbacks, and a pointer to device ID's which this entry should * match against. Usually this entry is exposed to the USB emulation * layer using the "USB_DRIVER_EXPORT()" macro, which is defined * below. */ struct usb_driver { const char *name; int (*probe)(struct usb_interface *intf, const struct usb_device_id *id); void (*disconnect)(struct usb_interface *intf); int (*ioctl)(struct usb_interface *intf, unsigned int code, void *buf); int (*suspend)(struct usb_interface *intf, pm_message_t message); int (*resume)(struct usb_interface *intf); const struct usb_device_id *id_table; void (*shutdown)(struct usb_interface *intf); LIST_ENTRY(usb_driver) linux_driver_list; }; #define USB_DRIVER_EXPORT(id,p_usb_drv) \ SYSINIT(id,SI_SUB_KLD,SI_ORDER_FIRST,usb_linux_register,p_usb_drv); \ SYSUNINIT(id,SI_SUB_KLD,SI_ORDER_ANY,usb_linux_deregister,p_usb_drv) #define USB_DT_ENDPOINT_SIZE 7 #define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* * Endpoints */ #define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ #define USB_ENDPOINT_DIR_MASK 0x80 #define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ #define USB_ENDPOINT_XFER_CONTROL 0 #define USB_ENDPOINT_XFER_ISOC 1 #define USB_ENDPOINT_XFER_BULK 2 #define USB_ENDPOINT_XFER_INT 3 #define USB_ENDPOINT_MAX_ADJUSTABLE 0x80 /* CONTROL REQUEST SUPPORT */ /* * Definition of direction mask for * "bEndpointAddress" and "bmRequestType": */ #define USB_DIR_MASK 0x80 #define USB_DIR_OUT 0x00 /* write to USB device */ #define USB_DIR_IN 0x80 /* read from USB device */ /* * Definition of type mask for * "bmRequestType": */ #define USB_TYPE_MASK (0x03 << 5) #define USB_TYPE_STANDARD (0x00 << 5) #define USB_TYPE_CLASS (0x01 << 5) #define USB_TYPE_VENDOR (0x02 << 5) #define USB_TYPE_RESERVED (0x03 << 5) /* * Definition of receiver mask for * "bmRequestType": */ #define USB_RECIP_MASK 0x1f #define USB_RECIP_DEVICE 0x00 #define USB_RECIP_INTERFACE 0x01 #define USB_RECIP_ENDPOINT 0x02 #define USB_RECIP_OTHER 0x03 /* * Definition of standard request values for * "bRequest": */ #define USB_REQ_GET_STATUS 0x00 #define USB_REQ_CLEAR_FEATURE 0x01 #define USB_REQ_SET_FEATURE 0x03 #define USB_REQ_SET_ADDRESS 0x05 #define USB_REQ_GET_DESCRIPTOR 0x06 #define USB_REQ_SET_DESCRIPTOR 0x07 #define USB_REQ_GET_CONFIGURATION 0x08 #define USB_REQ_SET_CONFIGURATION 0x09 #define USB_REQ_GET_INTERFACE 0x0A #define USB_REQ_SET_INTERFACE 0x0B #define USB_REQ_SYNCH_FRAME 0x0C #define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */ #define USB_REQ_GET_ENCRYPTION 0x0E #define USB_REQ_SET_HANDSHAKE 0x0F #define USB_REQ_GET_HANDSHAKE 0x10 #define USB_REQ_SET_CONNECTION 0x11 #define USB_REQ_SET_SECURITY_DATA 0x12 #define USB_REQ_GET_SECURITY_DATA 0x13 #define USB_REQ_SET_WUSB_DATA 0x14 #define USB_REQ_LOOPBACK_DATA_WRITE 0x15 #define USB_REQ_LOOPBACK_DATA_READ 0x16 #define USB_REQ_SET_INTERFACE_DS 0x17 /* * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and * are read as a bit array returned by USB_REQ_GET_STATUS. (So there * are at most sixteen features of each type.) */ #define USB_DEVICE_SELF_POWERED 0 /* (read only) */ #define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */ #define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */ #define USB_DEVICE_BATTERY 2 /* (wireless) */ #define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */ #define USB_DEVICE_WUSB_DEVICE 3 /* (wireless) */ #define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */ #define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */ #define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */ #define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */ #define PIPE_ISOCHRONOUS 0x01 /* UE_ISOCHRONOUS */ #define PIPE_INTERRUPT 0x03 /* UE_INTERRUPT */ #define PIPE_CONTROL 0x00 /* UE_CONTROL */ #define PIPE_BULK 0x02 /* UE_BULK */ /* Whenever Linux references an USB endpoint: * a) to initialize "urb->endpoint" * b) second argument passed to "usb_control_msg()" * * Then it uses one of the following macros. The "endpoint" argument * is the physical endpoint value masked by 0xF. The "dev" argument * is a pointer to "struct usb_device". */ #define usb_sndctrlpipe(dev,endpoint) \ usb_find_host_endpoint(dev, PIPE_CONTROL, (endpoint) | USB_DIR_OUT) #define usb_rcvctrlpipe(dev,endpoint) \ usb_find_host_endpoint(dev, PIPE_CONTROL, (endpoint) | USB_DIR_IN) #define usb_sndisocpipe(dev,endpoint) \ usb_find_host_endpoint(dev, PIPE_ISOCHRONOUS, (endpoint) | USB_DIR_OUT) #define usb_rcvisocpipe(dev,endpoint) \ usb_find_host_endpoint(dev, PIPE_ISOCHRONOUS, (endpoint) | USB_DIR_IN) #define usb_sndbulkpipe(dev,endpoint) \ usb_find_host_endpoint(dev, PIPE_BULK, (endpoint) | USB_DIR_OUT) #define usb_rcvbulkpipe(dev,endpoint) \ usb_find_host_endpoint(dev, PIPE_BULK, (endpoint) | USB_DIR_IN) #define usb_sndintpipe(dev,endpoint) \ usb_find_host_endpoint(dev, PIPE_INTERRUPT, (endpoint) | USB_DIR_OUT) #define usb_rcvintpipe(dev,endpoint) \ usb_find_host_endpoint(dev, PIPE_INTERRUPT, (endpoint) | USB_DIR_IN) /* * The following structure is used to extend "struct urb" when we are * dealing with an isochronous endpoint. It contains information about * the data offset and data length of an isochronous packet. * The "actual_length" field is updated before the "complete" * callback in the "urb" structure is called. */ struct usb_iso_packet_descriptor { uint32_t offset; /* depreciated buffer offset (the * packets are usually back to back) */ uint16_t length; /* expected length */ uint16_t actual_length; int16_t status; /* transfer status */ }; /* * The following structure holds various information about an USB * transfer. This structure is used for all kinds of USB transfers. * * URB is short for USB Request Block. */ struct urb { TAILQ_ENTRY(urb) bsd_urb_list; struct cv cv_wait; struct usb_device *dev; /* (in) pointer to associated device */ struct usb_host_endpoint *endpoint; /* (in) pipe pointer */ uint8_t *setup_packet; /* (in) setup packet (control only) */ uint8_t *bsd_data_ptr; void *transfer_buffer; /* (in) associated data buffer */ void *context; /* (in) context for completion */ usb_complete_t *complete; /* (in) completion routine */ usb_size_t transfer_buffer_length;/* (in) data buffer length */ usb_size_t bsd_length_rem; usb_size_t actual_length; /* (return) actual transfer length */ usb_timeout_t timeout; /* FreeBSD specific */ uint16_t transfer_flags; /* (in) */ #define URB_SHORT_NOT_OK 0x0001 /* report short transfers like errors */ #define URB_ISO_ASAP 0x0002 /* ignore "start_frame" field */ #define URB_ZERO_PACKET 0x0004 /* the USB transfer ends with a short * packet */ #define URB_NO_TRANSFER_DMA_MAP 0x0008 /* "transfer_dma" is valid on submit */ #define URB_WAIT_WAKEUP 0x0010 /* custom flags */ #define URB_IS_SLEEPING 0x0020 /* custom flags */ usb_frcount_t start_frame; /* (modify) start frame (ISO) */ usb_frcount_t number_of_packets; /* (in) number of ISO packets */ uint16_t interval; /* (modify) transfer interval * (INT/ISO) */ uint16_t error_count; /* (return) number of ISO errors */ int16_t status; /* (return) status */ uint8_t setup_dma; /* (in) not used on FreeBSD */ uint8_t transfer_dma; /* (in) not used on FreeBSD */ uint8_t bsd_isread; uint8_t kill_count; /* FreeBSD specific */ struct usb_iso_packet_descriptor iso_frame_desc[]; /* (in) ISO ONLY */ }; /* various prototypes */ int usb_submit_urb(struct urb *urb, uint16_t mem_flags); int usb_unlink_urb(struct urb *urb); int usb_clear_halt(struct usb_device *dev, struct usb_host_endpoint *uhe); int usb_control_msg(struct usb_device *dev, struct usb_host_endpoint *ep, uint8_t request, uint8_t requesttype, uint16_t value, uint16_t index, void *data, uint16_t size, usb_timeout_t timeout); int usb_set_interface(struct usb_device *dev, uint8_t ifnum, uint8_t alternate); int usb_setup_endpoint(struct usb_device *dev, struct usb_host_endpoint *uhe, usb_frlength_t bufsize); struct usb_host_endpoint *usb_find_host_endpoint(struct usb_device *dev, uint8_t type, uint8_t ep); struct urb *usb_alloc_urb(uint16_t iso_packets, uint16_t mem_flags); struct usb_host_interface *usb_altnum_to_altsetting( const struct usb_interface *intf, uint8_t alt_index); struct usb_interface *usb_ifnum_to_if(struct usb_device *dev, uint8_t iface_no); void *usb_buffer_alloc(struct usb_device *dev, usb_size_t size, uint16_t mem_flags, uint8_t *dma_addr); void *usbd_get_intfdata(struct usb_interface *intf); void usb_buffer_free(struct usb_device *dev, usb_size_t size, void *addr, uint8_t dma_addr); void usb_free_urb(struct urb *urb); void usb_init_urb(struct urb *urb); void usb_kill_urb(struct urb *urb); void usb_set_intfdata(struct usb_interface *intf, void *data); void usb_linux_register(void *arg); void usb_linux_deregister(void *arg); void usb_fill_bulk_urb(struct urb *, struct usb_device *, struct usb_host_endpoint *, void *, int, usb_complete_t, void *); int usb_bulk_msg(struct usb_device *, struct usb_host_endpoint *, void *, int, uint16_t *, usb_timeout_t); #define interface_to_usbdev(intf) (intf)->linux_udev #define interface_to_bsddev(intf) (intf)->linux_udev #endif /* _USB_COMPAT_LINUX_H */