/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END * * Portions Copyright 2008 John Birrell * * $FreeBSD$ * */ /* * Copyright 2007 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #define _ASM #include #include #include #include "assym.inc" #define INTR_POP \ movq TF_RDI(%rsp),%rdi; \ movq TF_RSI(%rsp),%rsi; \ movq TF_RDX(%rsp),%rdx; \ movq TF_RCX(%rsp),%rcx; \ movq TF_R8(%rsp),%r8; \ movq TF_R9(%rsp),%r9; \ movq TF_RAX(%rsp),%rax; \ movq TF_RBX(%rsp),%rbx; \ movq TF_RBP(%rsp),%rbp; \ movq TF_R10(%rsp),%r10; \ movq TF_R11(%rsp),%r11; \ movq TF_R12(%rsp),%r12; \ movq TF_R13(%rsp),%r13; \ movq TF_R14(%rsp),%r14; \ movq TF_R15(%rsp),%r15; \ testb $SEL_RPL_MASK,TF_CS(%rsp); \ jz 1f; \ cli; \ swapgs; \ 1: addq $TF_RIP,%rsp; .globl dtrace_invop_callsite .type dtrace_invop_callsite,@function ENTRY(dtrace_invop_start) /* * #BP traps with %rip set to the next address. We need to decrement * the value to indicate the address of the int3 (0xcc) instruction * that we substituted. */ movq TF_RIP(%rsp), %rdi decq %rdi movq %rsp, %rsi /* * Allocate some scratch space to let the invop handler return a value. * This is needed when emulating "call" instructions. */ subq $16, %rsp movq %rsp, %rdx call dtrace_invop dtrace_invop_callsite: addq $16, %rsp cmpl $DTRACE_INVOP_PUSHL_EBP, %eax je bp_push cmpl $DTRACE_INVOP_CALL, %eax je bp_call cmpl $DTRACE_INVOP_LEAVE, %eax je bp_leave cmpl $DTRACE_INVOP_NOP, %eax je bp_nop cmpl $DTRACE_INVOP_RET, %eax je bp_ret /* When all else fails handle the trap in the usual way. */ jmpq *dtrace_invop_calltrap_addr bp_push: /* * We must emulate a "pushq %rbp". To do this, we pull the stack * down 8 bytes, and then store the base pointer. */ INTR_POP subq $16, %rsp /* make room for %rbp */ pushq %rax /* push temp */ movq 24(%rsp), %rax /* load calling RIP */ movq %rax, 8(%rsp) /* store calling RIP */ movq 32(%rsp), %rax /* load calling CS */ movq %rax, 16(%rsp) /* store calling CS */ movq 40(%rsp), %rax /* load calling RFLAGS */ movq %rax, 24(%rsp) /* store calling RFLAGS */ movq 48(%rsp), %rax /* load calling RSP */ subq $8, %rax /* make room for %rbp */ movq %rax, 32(%rsp) /* store calling RSP */ movq 56(%rsp), %rax /* load calling SS */ movq %rax, 40(%rsp) /* store calling SS */ movq 32(%rsp), %rax /* reload calling RSP */ movq %rbp, (%rax) /* store %rbp there */ popq %rax /* pop off temp */ iretq /* return from interrupt */ /*NOTREACHED*/ bp_call: /* * Emulate a "call" instruction. The invop handler must have already * updated the saved copy of %rip in the register set. It's our job to * pull the hardware-saved registers down to make space for the return * address, which is provided by the invop handler in our scratch * space. */ INTR_POP subq $16, %rsp /* make room for %rbp */ pushq %rax /* push temp */ pushq %rbx /* push temp */ movq 32(%rsp), %rax /* load calling RIP */ movq %rax, 16(%rsp) /* store calling RIP */ movq 40(%rsp), %rax /* load calling CS */ movq %rax, 24(%rsp) /* store calling CS */ movq 48(%rsp), %rax /* load calling RFLAGS */ movq %rax, 32(%rsp) /* store calling RFLAGS */ movq 56(%rsp), %rax /* load calling RSP */ subq $8, %rax /* make room for return address */ movq %rax, 40(%rsp) /* store calling RSP */ movq 64(%rsp), %rax /* load calling SS */ movq %rax, 48(%rsp) /* store calling SS */ movq -(TF_RIP - 16)(%rsp), %rax /* load return address */ movq 40(%rsp), %rbx /* reload calling RSP */ movq %rax, (%rbx) /* store return address */ popq %rbx /* pop temp */ popq %rax /* pop temp */ iretq /* return from interrupt */ /*NOTREACHED*/ bp_leave: /* * We must emulate a "leave", which is the same as a "movq %rbp, %rsp" * followed by a "popq %rbp". This is quite a bit simpler on amd64 * than it is on i386 -- we can exploit the fact that the %rsp is * explicitly saved to effect the pop without having to reshuffle * the other data pushed for the trap. */ INTR_POP pushq %rax /* push temp */ movq 8(%rsp), %rax /* load calling RIP */ movq %rax, 8(%rsp) /* store calling RIP */ movq (%rbp), %rax /* get new %rbp */ addq $8, %rbp /* adjust new %rsp */ movq %rbp, 32(%rsp) /* store new %rsp */ movq %rax, %rbp /* set new %rbp */ popq %rax /* pop off temp */ iretq /* return from interrupt */ /*NOTREACHED*/ bp_nop: /* We must emulate a "nop". */ INTR_POP iretq /*NOTREACHED*/ bp_ret: INTR_POP pushq %rax /* push temp */ movq 32(%rsp), %rax /* load %rsp */ movq (%rax), %rax /* load calling RIP */ movq %rax, 8(%rsp) /* store calling RIP */ addq $8, 32(%rsp) /* adjust new %rsp */ popq %rax /* pop off temp */ iretq /* return from interrupt */ /*NOTREACHED*/ END(dtrace_invop_start) /* greg_t dtrace_getfp(void) */ ENTRY(dtrace_getfp) movq %rbp, %rax ret END(dtrace_getfp) /* uint32_t dtrace_cas32(uint32_t *target, uint32_t cmp, uint32_t new) */ ENTRY(dtrace_cas32) movl %esi, %eax lock cmpxchgl %edx, (%rdi) ret END(dtrace_cas32) /* void * dtrace_casptr(void *target, void *cmp, void *new) */ ENTRY(dtrace_casptr) movq %rsi, %rax lock cmpxchgq %rdx, (%rdi) ret END(dtrace_casptr) /* uintptr_t dtrace_caller(int aframes) */ ENTRY(dtrace_caller) movq $-1, %rax ret END(dtrace_caller) /* void dtrace_copy(uintptr_t src, uintptr_t dest, size_t size) */ ENTRY(dtrace_copy_nosmap) pushq %rbp movq %rsp, %rbp xchgq %rdi, %rsi /* make %rsi source, %rdi dest */ movq %rdx, %rcx /* load count */ repz /* repeat for count ... */ smovb /* move from %ds:rsi to %ed:rdi */ leave ret END(dtrace_copy_nosmap) ENTRY(dtrace_copy_smap) pushq %rbp movq %rsp, %rbp xchgq %rdi, %rsi /* make %rsi source, %rdi dest */ movq %rdx, %rcx /* load count */ stac repz /* repeat for count ... */ smovb /* move from %ds:rsi to %ed:rdi */ clac leave ret END(dtrace_copy_smap) /* void dtrace_copystr(uintptr_t uaddr, uintptr_t kaddr, size_t size, volatile uint16_t *flags) */ ENTRY(dtrace_copystr_nosmap) pushq %rbp movq %rsp, %rbp 0: movb (%rdi), %al /* load from source */ movb %al, (%rsi) /* store to destination */ addq $1, %rdi /* increment source pointer */ addq $1, %rsi /* increment destination pointer */ subq $1, %rdx /* decrement remaining count */ cmpb $0, %al je 2f testq $0xfff, %rdx /* test if count is 4k-aligned */ jnz 1f /* if not, continue with copying */ testq $CPU_DTRACE_BADADDR, (%rcx) /* load and test dtrace flags */ jnz 2f 1: cmpq $0, %rdx jne 0b 2: leave ret END(dtrace_copystr_nosmap) ENTRY(dtrace_copystr_smap) pushq %rbp movq %rsp, %rbp stac 0: movb (%rdi), %al /* load from source */ movb %al, (%rsi) /* store to destination */ addq $1, %rdi /* increment source pointer */ addq $1, %rsi /* increment destination pointer */ subq $1, %rdx /* decrement remaining count */ cmpb $0, %al je 2f testq $0xfff, %rdx /* test if count is 4k-aligned */ jnz 1f /* if not, continue with copying */ testq $CPU_DTRACE_BADADDR, (%rcx) /* load and test dtrace flags */ jnz 2f 1: cmpq $0, %rdx jne 0b 2: clac leave ret END(dtrace_copystr_smap) /* uintptr_t dtrace_fulword(void *addr) */ ENTRY(dtrace_fulword_nosmap) movq (%rdi), %rax ret END(dtrace_fulword_nosmap) ENTRY(dtrace_fulword_smap) stac movq (%rdi), %rax clac ret END(dtrace_fulword_smap) /* uint8_t dtrace_fuword8_nocheck(void *addr) */ ENTRY(dtrace_fuword8_nocheck_nosmap) xorq %rax, %rax movb (%rdi), %al ret END(dtrace_fuword8_nocheck_nosmap) ENTRY(dtrace_fuword8_nocheck_smap) stac xorq %rax, %rax movb (%rdi), %al clac ret END(dtrace_fuword8_nocheck_smap) /* uint16_t dtrace_fuword16_nocheck(void *addr) */ ENTRY(dtrace_fuword16_nocheck_nosmap) xorq %rax, %rax movw (%rdi), %ax ret END(dtrace_fuword16_nocheck_nosmap) ENTRY(dtrace_fuword16_nocheck_smap) stac xorq %rax, %rax movw (%rdi), %ax clac ret END(dtrace_fuword16_nocheck_smap) /* uint32_t dtrace_fuword32_nocheck(void *addr) */ ENTRY(dtrace_fuword32_nocheck_nosmap) xorq %rax, %rax movl (%rdi), %eax ret END(dtrace_fuword32_nocheck_nosmap) ENTRY(dtrace_fuword32_nocheck_smap) stac xorq %rax, %rax movl (%rdi), %eax clac ret END(dtrace_fuword32_nocheck_smap) /* uint64_t dtrace_fuword64_nocheck(void *addr) */ ENTRY(dtrace_fuword64_nocheck_nosmap) movq (%rdi), %rax ret END(dtrace_fuword64_nocheck_nosmap) ENTRY(dtrace_fuword64_nocheck_smap) stac movq (%rdi), %rax clac ret END(dtrace_fuword64_nocheck_smap) /* void dtrace_probe_error(dtrace_state_t *state, dtrace_epid_t epid, int which, int fault, int fltoffs, uintptr_t illval) */ ENTRY(dtrace_probe_error) pushq %rbp movq %rsp, %rbp subq $0x8, %rsp movq %r9, (%rsp) movq %r8, %r9 movq %rcx, %r8 movq %rdx, %rcx movq %rsi, %rdx movq %rdi, %rsi movl dtrace_probeid_error(%rip), %edi call dtrace_probe addq $0x8, %rsp leave ret END(dtrace_probe_error) /* void dtrace_membar_producer(void) */ ENTRY(dtrace_membar_producer) rep; ret /* use 2 byte return instruction when branch target */ /* AMD Software Optimization Guide - Section 6.2 */ END(dtrace_membar_producer) /* void dtrace_membar_consumer(void) */ ENTRY(dtrace_membar_consumer) rep; ret /* use 2 byte return instruction when branch target */ /* AMD Software Optimization Guide - Section 6.2 */ END(dtrace_membar_consumer) /* dtrace_icookie_t dtrace_interrupt_disable(void) */ ENTRY(dtrace_interrupt_disable) pushfq popq %rax cli ret END(dtrace_interrupt_disable) /* void dtrace_interrupt_enable(dtrace_icookie_t cookie) */ ENTRY(dtrace_interrupt_enable) pushq %rdi popfq ret END(dtrace_interrupt_enable)