/*- * SPDX-License-Identifier: BSD-2-Clause * * Copyright (c) 2008, 2009 Silicon Graphics International Corp. * Copyright (c) 2014-2015 Alexander Motin * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. * * $Id: //depot/users/kenm/FreeBSD-test2/sys/cam/ctl/scsi_ctl.c#4 $ */ /* * Peripheral driver interface between CAM and CTL (CAM Target Layer). * * Author: Ken Merry */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include struct ctlfe_softc { struct ctl_port port; path_id_t path_id; target_id_t target_id; uint32_t hba_misc; u_int maxio; struct cam_sim *sim; char port_name[DEV_IDLEN]; struct mtx lun_softc_mtx; STAILQ_HEAD(, ctlfe_lun_softc) lun_softc_list; STAILQ_ENTRY(ctlfe_softc) links; }; STAILQ_HEAD(, ctlfe_softc) ctlfe_softc_list; struct mtx ctlfe_list_mtx; static char ctlfe_mtx_desc[] = "ctlfelist"; typedef enum { CTLFE_LUN_NONE = 0x00, CTLFE_LUN_WILDCARD = 0x01 } ctlfe_lun_flags; struct ctlfe_lun_softc { struct ctlfe_softc *parent_softc; struct cam_periph *periph; ctlfe_lun_flags flags; int ctios_sent; /* Number of active CTIOs */ int refcount; /* Number of active xpt_action() */ int atios_alloced; /* Number of ATIOs not freed */ int inots_alloced; /* Number of INOTs not freed */ struct task refdrain_task; STAILQ_HEAD(, ccb_hdr) work_queue; LIST_HEAD(, ccb_hdr) atio_list; /* List of ATIOs queued to SIM. */ LIST_HEAD(, ccb_hdr) inot_list; /* List of INOTs queued to SIM. */ STAILQ_ENTRY(ctlfe_lun_softc) links; }; typedef enum { CTLFE_CMD_NONE = 0x00, CTLFE_CMD_PIECEWISE = 0x01 } ctlfe_cmd_flags; struct ctlfe_cmd_info { int cur_transfer_index; size_t cur_transfer_off; ctlfe_cmd_flags flags; /* * XXX KDM struct bus_dma_segment is 8 bytes on i386, and 16 * bytes on amd64. So with 32 elements, this is 256 bytes on * i386 and 512 bytes on amd64. */ #define CTLFE_MAX_SEGS 32 bus_dma_segment_t cam_sglist[CTLFE_MAX_SEGS]; }; /* * When we register the adapter/bus, request that this many ctl_ios be * allocated. This should be the maximum supported by the adapter, but we * currently don't have a way to get that back from the path inquiry. * XXX KDM add that to the path inquiry. */ #define CTLFE_REQ_CTL_IO 4096 /* * Number of Accept Target I/O CCBs to allocate and queue down to the * adapter per LUN. * XXX KDM should this be controlled by CTL? */ #define CTLFE_ATIO_PER_LUN 1024 /* * Number of Immediate Notify CCBs (used for aborts, resets, etc.) to * allocate and queue down to the adapter per LUN. * XXX KDM should this be controlled by CTL? */ #define CTLFE_IN_PER_LUN 1024 /* * Timeout (in seconds) on CTIO CCB doing DMA or sending status */ #define CTLFE_TIMEOUT 5 /* * Turn this on to enable extra debugging prints. */ #if 0 #define CTLFE_DEBUG #endif MALLOC_DEFINE(M_CTLFE, "CAM CTL FE", "CAM CTL FE interface"); #define io_ptr ppriv_ptr0 /* This is only used in the CTIO */ #define ccb_atio ppriv_ptr1 #define PRIV_CCB(io) ((io)->io_hdr.ctl_private[CTL_PRIV_FRONTEND].ptrs[0]) #define PRIV_INFO(io) ((io)->io_hdr.ctl_private[CTL_PRIV_FRONTEND].ptrs[1]) static int ctlfeinitialize(void); static int ctlfeshutdown(void); static periph_init_t ctlfeperiphinit; static periph_deinit_t ctlfeperiphdeinit; static void ctlfeasync(void *callback_arg, uint32_t code, struct cam_path *path, void *arg); static periph_ctor_t ctlferegister; static periph_oninv_t ctlfeoninvalidate; static periph_dtor_t ctlfecleanup; static periph_start_t ctlfestart; static void ctlfedone(struct cam_periph *periph, union ccb *done_ccb); static void ctlfe_onoffline(void *arg, int online); static void ctlfe_online(void *arg); static void ctlfe_offline(void *arg); static int ctlfe_lun_enable(void *arg, int lun_id); static int ctlfe_lun_disable(void *arg, int lun_id); static void ctlfe_dump_sim(struct cam_sim *sim); static void ctlfe_dump_queue(struct ctlfe_lun_softc *softc); static void ctlfe_datamove(union ctl_io *io); static void ctlfe_done(union ctl_io *io); static void ctlfe_dump(void); static void ctlfe_free_ccb(struct cam_periph *periph, union ccb *ccb); static void ctlfe_requeue_ccb(struct cam_periph *periph, union ccb *ccb, int unlock); static struct periph_driver ctlfe_driver = { ctlfeperiphinit, "ctl", TAILQ_HEAD_INITIALIZER(ctlfe_driver.units), /*generation*/ 0, CAM_PERIPH_DRV_EARLY, ctlfeperiphdeinit }; static struct ctl_frontend ctlfe_frontend = { .name = "camtgt", .init = ctlfeinitialize, .fe_dump = ctlfe_dump, .shutdown = ctlfeshutdown, }; CTL_FRONTEND_DECLARE(ctlfe, ctlfe_frontend); static int ctlfeinitialize(void) { STAILQ_INIT(&ctlfe_softc_list); mtx_init(&ctlfe_list_mtx, ctlfe_mtx_desc, NULL, MTX_DEF); periphdriver_register(&ctlfe_driver); return (0); } static int ctlfeshutdown(void) { int error; error = periphdriver_unregister(&ctlfe_driver); if (error != 0) return (error); mtx_destroy(&ctlfe_list_mtx); return (0); } static void ctlfeperiphinit(void) { cam_status status; status = xpt_register_async(AC_PATH_REGISTERED | AC_PATH_DEREGISTERED | AC_CONTRACT, ctlfeasync, NULL, NULL); if (status != CAM_REQ_CMP) { printf("ctl: Failed to attach async callback due to CAM " "status 0x%x!\n", status); } } static int ctlfeperiphdeinit(void) { /* XXX: It would be good to tear down active ports here. */ if (!TAILQ_EMPTY(&ctlfe_driver.units)) return (EBUSY); xpt_register_async(0, ctlfeasync, NULL, NULL); return (0); } static void ctlfeasync(void *callback_arg, uint32_t code, struct cam_path *path, void *arg) { struct ctlfe_softc *softc; #ifdef CTLFEDEBUG printf("%s: entered\n", __func__); #endif mtx_lock(&ctlfe_list_mtx); STAILQ_FOREACH(softc, &ctlfe_softc_list, links) { if (softc->path_id == xpt_path_path_id(path)) break; } mtx_unlock(&ctlfe_list_mtx); /* * When a new path gets registered, and it is capable of target * mode, go ahead and attach. Later on, we may need to be more * selective, but for now this will be sufficient. */ switch (code) { case AC_PATH_REGISTERED: { struct ctl_port *port; struct ccb_pathinq *cpi; int retval; cpi = (struct ccb_pathinq *)arg; /* Don't attach if it doesn't support target mode */ if ((cpi->target_sprt & PIT_PROCESSOR) == 0) { #ifdef CTLFEDEBUG printf("%s: SIM %s%d doesn't support target mode\n", __func__, cpi->dev_name, cpi->unit_number); #endif break; } if (softc != NULL) { #ifdef CTLFEDEBUG printf("%s: CTL port for CAM path %u already exists\n", __func__, xpt_path_path_id(path)); #endif break; } /* * We're in an interrupt context here, so we have to * use M_NOWAIT. Of course this means trouble if we * can't allocate memory. */ softc = malloc(sizeof(*softc), M_CTLFE, M_NOWAIT | M_ZERO); if (softc == NULL) { printf("%s: unable to malloc %zd bytes for softc\n", __func__, sizeof(*softc)); return; } softc->path_id = cpi->ccb_h.path_id; softc->target_id = cpi->initiator_id; softc->sim = xpt_path_sim(path); softc->hba_misc = cpi->hba_misc; if (cpi->maxio != 0) softc->maxio = cpi->maxio; else softc->maxio = DFLTPHYS; mtx_init(&softc->lun_softc_mtx, "LUN softc mtx", NULL, MTX_DEF); STAILQ_INIT(&softc->lun_softc_list); port = &softc->port; port->frontend = &ctlfe_frontend; /* * XXX KDM should we be more accurate here ? */ if (cpi->transport == XPORT_FC) port->port_type = CTL_PORT_FC; else if (cpi->transport == XPORT_SAS) port->port_type = CTL_PORT_SAS; else port->port_type = CTL_PORT_SCSI; /* XXX KDM what should the real number be here? */ port->num_requested_ctl_io = CTLFE_REQ_CTL_IO; snprintf(softc->port_name, sizeof(softc->port_name), "%s%d", cpi->dev_name, cpi->unit_number); /* * XXX KDM it would be nice to allocate storage in the * frontend structure itself. */ port->port_name = softc->port_name; port->physical_port = cpi->bus_id; port->virtual_port = 0; port->port_online = ctlfe_online; port->port_offline = ctlfe_offline; port->onoff_arg = softc; port->lun_enable = ctlfe_lun_enable; port->lun_disable = ctlfe_lun_disable; port->targ_lun_arg = softc; port->fe_datamove = ctlfe_datamove; port->fe_done = ctlfe_done; port->targ_port = -1; retval = ctl_port_register(port); if (retval != 0) { printf("%s: ctl_port_register() failed with " "error %d!\n", __func__, retval); mtx_destroy(&softc->lun_softc_mtx); free(softc, M_CTLFE); break; } else { mtx_lock(&ctlfe_list_mtx); STAILQ_INSERT_TAIL(&ctlfe_softc_list, softc, links); mtx_unlock(&ctlfe_list_mtx); } break; } case AC_PATH_DEREGISTERED: { if (softc != NULL) { /* * XXX KDM are we certain at this point that there * are no outstanding commands for this frontend? */ mtx_lock(&ctlfe_list_mtx); STAILQ_REMOVE(&ctlfe_softc_list, softc, ctlfe_softc, links); mtx_unlock(&ctlfe_list_mtx); ctl_port_deregister(&softc->port); mtx_destroy(&softc->lun_softc_mtx); free(softc, M_CTLFE); } break; } case AC_CONTRACT: { struct ac_contract *ac; ac = (struct ac_contract *)arg; switch (ac->contract_number) { case AC_CONTRACT_DEV_CHG: { struct ac_device_changed *dev_chg; int retval; dev_chg = (struct ac_device_changed *)ac->contract_data; printf("%s: WWPN %#jx port 0x%06x path %u target %u %s\n", __func__, dev_chg->wwpn, dev_chg->port, xpt_path_path_id(path), dev_chg->target, (dev_chg->arrived == 0) ? "left" : "arrived"); if (softc == NULL) { printf("%s: CTL port for CAM path %u not " "found!\n", __func__, xpt_path_path_id(path)); break; } if (dev_chg->arrived != 0) { retval = ctl_add_initiator(&softc->port, dev_chg->target, dev_chg->wwpn, NULL); } else { retval = ctl_remove_initiator(&softc->port, dev_chg->target); } if (retval < 0) { printf("%s: could not %s port %d iid %u " "WWPN %#jx!\n", __func__, (dev_chg->arrived != 0) ? "add" : "remove", softc->port.targ_port, dev_chg->target, (uintmax_t)dev_chg->wwpn); } break; } default: printf("%s: unsupported contract number %ju\n", __func__, (uintmax_t)ac->contract_number); break; } break; } default: break; } } static cam_status ctlferegister(struct cam_periph *periph, void *arg) { struct ctlfe_softc *bus_softc; struct ctlfe_lun_softc *softc; union ccb ccb; cam_status status; int i, acstatus; softc = (struct ctlfe_lun_softc *)arg; bus_softc = softc->parent_softc; STAILQ_INIT(&softc->work_queue); LIST_INIT(&softc->atio_list); LIST_INIT(&softc->inot_list); softc->periph = periph; periph->softc = softc; /* Increase device openings to maximum for the SIM. */ if (bus_softc->sim->max_tagged_dev_openings > bus_softc->sim->max_dev_openings) { cam_release_devq(periph->path, /*relsim_flags*/RELSIM_ADJUST_OPENINGS, /*openings*/bus_softc->sim->max_tagged_dev_openings, /*timeout*/0, /*getcount_only*/1); } memset(&ccb, 0, sizeof(ccb)); xpt_setup_ccb(&ccb.ccb_h, periph->path, CAM_PRIORITY_NONE); ccb.ccb_h.func_code = XPT_EN_LUN; ccb.cel.grp6_len = 0; ccb.cel.grp7_len = 0; ccb.cel.enable = 1; xpt_action(&ccb); status = (ccb.ccb_h.status & CAM_STATUS_MASK); if (status != CAM_REQ_CMP) { xpt_print(periph->path, "%s: Enable LUN failed, status 0x%x\n", __func__, ccb.ccb_h.status); return (status); } status = CAM_REQ_CMP; for (i = 0; i < CTLFE_ATIO_PER_LUN; i++) { union ccb *new_ccb; union ctl_io *new_io; struct ctlfe_cmd_info *cmd_info; new_ccb = (union ccb *)malloc(sizeof(*new_ccb), M_CTLFE, M_ZERO|M_NOWAIT); if (new_ccb == NULL) { status = CAM_RESRC_UNAVAIL; break; } new_io = ctl_alloc_io_nowait(bus_softc->port.ctl_pool_ref); if (new_io == NULL) { free(new_ccb, M_CTLFE); status = CAM_RESRC_UNAVAIL; break; } cmd_info = malloc(sizeof(*cmd_info), M_CTLFE, M_ZERO | M_NOWAIT); if (cmd_info == NULL) { ctl_free_io(new_io); free(new_ccb, M_CTLFE); status = CAM_RESRC_UNAVAIL; break; } PRIV_INFO(new_io) = cmd_info; softc->atios_alloced++; new_ccb->ccb_h.io_ptr = new_io; LIST_INSERT_HEAD(&softc->atio_list, &new_ccb->ccb_h, periph_links.le); xpt_setup_ccb(&new_ccb->ccb_h, periph->path, CAM_PRIORITY_NONE); new_ccb->ccb_h.func_code = XPT_ACCEPT_TARGET_IO; new_ccb->ccb_h.cbfcnp = ctlfedone; new_ccb->ccb_h.flags |= CAM_UNLOCKED; xpt_action(new_ccb); status = new_ccb->ccb_h.status; if ((status & CAM_STATUS_MASK) != CAM_REQ_INPROG) { free(cmd_info, M_CTLFE); ctl_free_io(new_io); free(new_ccb, M_CTLFE); break; } } acstatus = cam_periph_acquire(periph); if (acstatus != 0) { xpt_print(periph->path, "%s: could not acquire reference " "count, status = %#x\n", __func__, acstatus); return (CAM_REQ_CMP_ERR); } if (i == 0) { xpt_print(periph->path, "%s: could not allocate ATIO CCBs, " "status 0x%x\n", __func__, status); return (CAM_REQ_CMP_ERR); } for (i = 0; i < CTLFE_IN_PER_LUN; i++) { union ccb *new_ccb; union ctl_io *new_io; new_ccb = (union ccb *)malloc(sizeof(*new_ccb), M_CTLFE, M_ZERO|M_NOWAIT); if (new_ccb == NULL) { status = CAM_RESRC_UNAVAIL; break; } new_io = ctl_alloc_io_nowait(bus_softc->port.ctl_pool_ref); if (new_io == NULL) { free(new_ccb, M_CTLFE); status = CAM_RESRC_UNAVAIL; break; } softc->inots_alloced++; new_ccb->ccb_h.io_ptr = new_io; LIST_INSERT_HEAD(&softc->inot_list, &new_ccb->ccb_h, periph_links.le); xpt_setup_ccb(&new_ccb->ccb_h, periph->path, CAM_PRIORITY_NONE); new_ccb->ccb_h.func_code = XPT_IMMEDIATE_NOTIFY; new_ccb->ccb_h.cbfcnp = ctlfedone; new_ccb->ccb_h.flags |= CAM_UNLOCKED; xpt_action(new_ccb); status = new_ccb->ccb_h.status; if ((status & CAM_STATUS_MASK) != CAM_REQ_INPROG) { /* * Note that we don't free the CCB here. If the * status is not CAM_REQ_INPROG, then we're * probably talking to a SIM that says it is * target-capable but doesn't support the * XPT_IMMEDIATE_NOTIFY CCB. i.e. it supports the * older API. In that case, it'll call xpt_done() * on the CCB, and we need to free it in our done * routine as a result. */ break; } } if ((i == 0) || (status != CAM_REQ_INPROG)) { xpt_print(periph->path, "%s: could not allocate immediate " "notify CCBs, status 0x%x\n", __func__, status); return (CAM_REQ_CMP_ERR); } mtx_lock(&bus_softc->lun_softc_mtx); STAILQ_INSERT_TAIL(&bus_softc->lun_softc_list, softc, links); mtx_unlock(&bus_softc->lun_softc_mtx); return (CAM_REQ_CMP); } static void ctlfeoninvalidate(struct cam_periph *periph) { struct ctlfe_lun_softc *softc = (struct ctlfe_lun_softc *)periph->softc; struct ctlfe_softc *bus_softc; union ccb ccb; struct ccb_hdr *hdr; cam_status status; /* Abort all ATIOs and INOTs queued to SIM. */ memset(&ccb, 0, sizeof(ccb)); xpt_setup_ccb(&ccb.ccb_h, periph->path, CAM_PRIORITY_NONE); ccb.ccb_h.func_code = XPT_ABORT; LIST_FOREACH(hdr, &softc->atio_list, periph_links.le) { ccb.cab.abort_ccb = (union ccb *)hdr; xpt_action(&ccb); } LIST_FOREACH(hdr, &softc->inot_list, periph_links.le) { ccb.cab.abort_ccb = (union ccb *)hdr; xpt_action(&ccb); } /* Disable the LUN in SIM. */ ccb.ccb_h.func_code = XPT_EN_LUN; ccb.cel.grp6_len = 0; ccb.cel.grp7_len = 0; ccb.cel.enable = 0; xpt_action(&ccb); status = (ccb.ccb_h.status & CAM_STATUS_MASK); if (status != CAM_REQ_CMP) { xpt_print(periph->path, "%s: Disable LUN failed, status 0x%x\n", __func__, ccb.ccb_h.status); /* * XXX KDM what do we do now? */ } bus_softc = softc->parent_softc; mtx_lock(&bus_softc->lun_softc_mtx); STAILQ_REMOVE(&bus_softc->lun_softc_list, softc, ctlfe_lun_softc, links); mtx_unlock(&bus_softc->lun_softc_mtx); } static void ctlfecleanup(struct cam_periph *periph) { struct ctlfe_lun_softc *softc; softc = (struct ctlfe_lun_softc *)periph->softc; KASSERT(softc->ctios_sent == 0, ("%s: ctios_sent %d != 0", __func__, softc->ctios_sent)); KASSERT(softc->refcount == 0, ("%s: refcount %d != 0", __func__, softc->refcount)); KASSERT(softc->atios_alloced == 0, ("%s: atios_alloced %d != 0", __func__, softc->atios_alloced)); KASSERT(softc->inots_alloced == 0, ("%s: inots_alloced %d != 0", __func__, softc->inots_alloced)); free(softc, M_CTLFE); } static void ctlfedata(struct ctlfe_lun_softc *softc, union ctl_io *io, ccb_flags *flags, uint8_t **data_ptr, uint32_t *dxfer_len, uint16_t *sglist_cnt) { struct ctlfe_softc *bus_softc; struct ctlfe_cmd_info *cmd_info; struct ctl_sg_entry *ctl_sglist; bus_dma_segment_t *cam_sglist; size_t off; int i, idx; cmd_info = PRIV_INFO(io); bus_softc = softc->parent_softc; /* * Set the direction, relative to the initiator. */ *flags &= ~CAM_DIR_MASK; if ((io->io_hdr.flags & CTL_FLAG_DATA_MASK) == CTL_FLAG_DATA_IN) *flags |= CAM_DIR_IN; else *flags |= CAM_DIR_OUT; *flags &= ~CAM_DATA_MASK; idx = cmd_info->cur_transfer_index; off = cmd_info->cur_transfer_off; cmd_info->flags &= ~CTLFE_CMD_PIECEWISE; if (io->scsiio.kern_sg_entries == 0) { /* No S/G list. */ /* One time shift for SRR offset. */ off += io->scsiio.ext_data_filled; io->scsiio.ext_data_filled = 0; *data_ptr = io->scsiio.kern_data_ptr + off; if (io->scsiio.kern_data_len - off <= bus_softc->maxio) { *dxfer_len = io->scsiio.kern_data_len - off; } else { *dxfer_len = bus_softc->maxio; cmd_info->cur_transfer_off += bus_softc->maxio; cmd_info->flags |= CTLFE_CMD_PIECEWISE; } *sglist_cnt = 0; if (io->io_hdr.flags & CTL_FLAG_BUS_ADDR) *flags |= CAM_DATA_PADDR; else *flags |= CAM_DATA_VADDR; } else { /* S/G list with physical or virtual pointers. */ ctl_sglist = (struct ctl_sg_entry *)io->scsiio.kern_data_ptr; /* One time shift for SRR offset. */ while (io->scsiio.ext_data_filled >= ctl_sglist[idx].len - off) { io->scsiio.ext_data_filled -= ctl_sglist[idx].len - off; idx++; off = 0; } off += io->scsiio.ext_data_filled; io->scsiio.ext_data_filled = 0; cam_sglist = cmd_info->cam_sglist; *dxfer_len = 0; for (i = 0; i < io->scsiio.kern_sg_entries - idx; i++) { cam_sglist[i].ds_addr = (bus_addr_t)(uintptr_t)ctl_sglist[i + idx].addr + off; if (ctl_sglist[i + idx].len - off <= bus_softc->maxio - *dxfer_len) { cam_sglist[i].ds_len = ctl_sglist[idx + i].len - off; *dxfer_len += cam_sglist[i].ds_len; } else { cam_sglist[i].ds_len = bus_softc->maxio - *dxfer_len; cmd_info->cur_transfer_index = idx + i; cmd_info->cur_transfer_off = cam_sglist[i].ds_len + off; cmd_info->flags |= CTLFE_CMD_PIECEWISE; *dxfer_len += cam_sglist[i].ds_len; if (ctl_sglist[i].len != 0) i++; break; } if (i == (CTLFE_MAX_SEGS - 1) && idx + i < (io->scsiio.kern_sg_entries - 1)) { cmd_info->cur_transfer_index = idx + i + 1; cmd_info->cur_transfer_off = 0; cmd_info->flags |= CTLFE_CMD_PIECEWISE; i++; break; } off = 0; } *sglist_cnt = i; if (io->io_hdr.flags & CTL_FLAG_BUS_ADDR) *flags |= CAM_DATA_SG_PADDR; else *flags |= CAM_DATA_SG; *data_ptr = (uint8_t *)cam_sglist; } } static void ctlfestart(struct cam_periph *periph, union ccb *start_ccb) { struct ctlfe_lun_softc *softc; struct ctlfe_cmd_info *cmd_info; struct ccb_hdr *ccb_h; struct ccb_accept_tio *atio; struct ccb_scsiio *csio; uint8_t *data_ptr; uint32_t dxfer_len; ccb_flags flags; union ctl_io *io; uint8_t scsi_status; softc = (struct ctlfe_lun_softc *)periph->softc; next: /* Take the ATIO off the work queue */ ccb_h = STAILQ_FIRST(&softc->work_queue); if (ccb_h == NULL) { xpt_release_ccb(start_ccb); return; } STAILQ_REMOVE_HEAD(&softc->work_queue, periph_links.stqe); atio = (struct ccb_accept_tio *)ccb_h; io = (union ctl_io *)ccb_h->io_ptr; csio = &start_ccb->csio; flags = atio->ccb_h.flags & (CAM_DIS_DISCONNECT|CAM_TAG_ACTION_VALID|CAM_DIR_MASK); cmd_info = PRIV_INFO(io); cmd_info->cur_transfer_index = 0; cmd_info->cur_transfer_off = 0; cmd_info->flags = 0; if (io->io_hdr.flags & CTL_FLAG_DMA_QUEUED) { /* * Datamove call, we need to setup the S/G list. */ ctlfedata(softc, io, &flags, &data_ptr, &dxfer_len, &csio->sglist_cnt); } else { /* * We're done, send status back. */ if ((io->io_hdr.flags & CTL_FLAG_ABORT) && (io->io_hdr.flags & CTL_FLAG_ABORT_STATUS) == 0) { io->io_hdr.flags &= ~CTL_FLAG_STATUS_QUEUED; /* Tell the SIM that we've aborted this ATIO */ #ifdef CTLFEDEBUG printf("%s: tag %04x abort\n", __func__, atio->tag_id); #endif KASSERT(atio->ccb_h.func_code == XPT_ACCEPT_TARGET_IO, ("func_code %#x is not ATIO", atio->ccb_h.func_code)); start_ccb->ccb_h.func_code = XPT_ABORT; start_ccb->cab.abort_ccb = (union ccb *)atio; xpt_action(start_ccb); ctlfe_requeue_ccb(periph, (union ccb *)atio, /* unlock */0); /* XPT_ABORT is not queued, so we can take next I/O. */ goto next; } data_ptr = NULL; dxfer_len = 0; csio->sglist_cnt = 0; } scsi_status = 0; if ((io->io_hdr.flags & CTL_FLAG_STATUS_QUEUED) && (cmd_info->flags & CTLFE_CMD_PIECEWISE) == 0 && ((io->io_hdr.flags & CTL_FLAG_DMA_QUEUED) == 0 || io->io_hdr.status == CTL_SUCCESS)) { flags |= CAM_SEND_STATUS; scsi_status = io->scsiio.scsi_status; csio->sense_len = io->scsiio.sense_len; #ifdef CTLFEDEBUG printf("%s: tag %04x status %x\n", __func__, atio->tag_id, io->io_hdr.status); #endif if (csio->sense_len != 0) { csio->sense_data = io->scsiio.sense_data; flags |= CAM_SEND_SENSE; } } #ifdef CTLFEDEBUG printf("%s: %s: tag %04x flags %x ptr %p len %u\n", __func__, (flags & CAM_SEND_STATUS) ? "done" : "datamove", atio->tag_id, flags, data_ptr, dxfer_len); #endif /* * Valid combinations: * - CAM_SEND_STATUS, CAM_DATA_SG = 0, dxfer_len = 0, * sglist_cnt = 0 * - CAM_SEND_STATUS = 0, CAM_DATA_SG = 0, dxfer_len != 0, * sglist_cnt = 0 * - CAM_SEND_STATUS = 0, CAM_DATA_SG, dxfer_len != 0, * sglist_cnt != 0 */ #ifdef CTLFEDEBUG if (((flags & CAM_SEND_STATUS) && (((flags & CAM_DATA_SG) != 0) || (dxfer_len != 0) || (csio->sglist_cnt != 0))) || (((flags & CAM_SEND_STATUS) == 0) && (dxfer_len == 0)) || ((flags & CAM_DATA_SG) && (csio->sglist_cnt == 0)) || (((flags & CAM_DATA_SG) == 0) && (csio->sglist_cnt != 0))) { printf("%s: tag %04x cdb %02x flags %#x dxfer_len " "%d sg %u\n", __func__, atio->tag_id, atio_cdb_ptr(atio)[0], flags, dxfer_len, csio->sglist_cnt); printf("%s: tag %04x io status %#x\n", __func__, atio->tag_id, io->io_hdr.status); } #endif cam_fill_ctio(csio, /*retries*/ 2, ctlfedone, flags, (flags & CAM_TAG_ACTION_VALID) ? MSG_SIMPLE_Q_TAG : 0, atio->tag_id, atio->init_id, scsi_status, /*data_ptr*/ data_ptr, /*dxfer_len*/ dxfer_len, /*timeout*/ CTLFE_TIMEOUT * 1000); start_ccb->ccb_h.flags |= CAM_UNLOCKED; start_ccb->ccb_h.ccb_atio = atio; if (io->io_hdr.flags & CTL_FLAG_DMA_QUEUED) io->io_hdr.flags |= CTL_FLAG_DMA_INPROG; io->io_hdr.flags &= ~(CTL_FLAG_DMA_QUEUED | CTL_FLAG_STATUS_QUEUED); softc->ctios_sent++; softc->refcount++; cam_periph_unlock(periph); xpt_action(start_ccb); cam_periph_lock(periph); softc->refcount--; /* * If we still have work to do, ask for another CCB. */ if (!STAILQ_EMPTY(&softc->work_queue)) xpt_schedule(periph, CAM_PRIORITY_NORMAL); } static void ctlfe_drain(void *context, int pending) { struct cam_periph *periph = context; struct ctlfe_lun_softc *softc = periph->softc; cam_periph_lock(periph); while (softc->refcount != 0) { cam_periph_sleep(periph, &softc->refcount, PRIBIO, "ctlfe_drain", 1); } cam_periph_unlock(periph); cam_periph_release(periph); } static void ctlfe_free_ccb(struct cam_periph *periph, union ccb *ccb) { struct ctlfe_lun_softc *softc; union ctl_io *io; struct ctlfe_cmd_info *cmd_info; softc = (struct ctlfe_lun_softc *)periph->softc; io = ccb->ccb_h.io_ptr; switch (ccb->ccb_h.func_code) { case XPT_ACCEPT_TARGET_IO: softc->atios_alloced--; cmd_info = PRIV_INFO(io); free(cmd_info, M_CTLFE); break; case XPT_IMMEDIATE_NOTIFY: case XPT_NOTIFY_ACKNOWLEDGE: softc->inots_alloced--; break; default: break; } ctl_free_io(io); free(ccb, M_CTLFE); KASSERT(softc->atios_alloced >= 0, ("%s: atios_alloced %d < 0", __func__, softc->atios_alloced)); KASSERT(softc->inots_alloced >= 0, ("%s: inots_alloced %d < 0", __func__, softc->inots_alloced)); /* * If we have received all of our CCBs, we can release our * reference on the peripheral driver. It will probably go away * now. */ if (softc->atios_alloced == 0 && softc->inots_alloced == 0) { if (softc->refcount == 0) { cam_periph_release_locked(periph); } else { TASK_INIT(&softc->refdrain_task, 0, ctlfe_drain, periph); taskqueue_enqueue(taskqueue_thread, &softc->refdrain_task); } } } /* * Send the ATIO/INOT back to the SIM, or free it if periph was invalidated. */ static void ctlfe_requeue_ccb(struct cam_periph *periph, union ccb *ccb, int unlock) { struct ctlfe_lun_softc *softc; struct mtx *mtx; if (periph->flags & CAM_PERIPH_INVALID) { mtx = cam_periph_mtx(periph); ctlfe_free_ccb(periph, ccb); if (unlock) mtx_unlock(mtx); return; } softc = (struct ctlfe_lun_softc *)periph->softc; if (ccb->ccb_h.func_code == XPT_ACCEPT_TARGET_IO) LIST_INSERT_HEAD(&softc->atio_list, &ccb->ccb_h, periph_links.le); else LIST_INSERT_HEAD(&softc->inot_list, &ccb->ccb_h, periph_links.le); if (unlock) cam_periph_unlock(periph); /* * For a wildcard attachment, commands can come in with a specific * target/lun. Reset the target and LUN fields back to the wildcard * values before we send them back down to the SIM. */ xpt_setup_ccb_flags(&ccb->ccb_h, periph->path, CAM_PRIORITY_NONE, ccb->ccb_h.flags); xpt_action(ccb); } static int ctlfe_adjust_cdb(struct ccb_accept_tio *atio, uint32_t offset) { uint64_t lba; uint32_t num_blocks, nbc; uint8_t *cmdbyt = atio_cdb_ptr(atio); nbc = offset >> 9; /* ASSUMING 512 BYTE BLOCKS */ switch (cmdbyt[0]) { case READ_6: case WRITE_6: { struct scsi_rw_6 *cdb = (struct scsi_rw_6 *)cmdbyt; lba = scsi_3btoul(cdb->addr); lba &= 0x1fffff; num_blocks = cdb->length; if (num_blocks == 0) num_blocks = 256; lba += nbc; num_blocks -= nbc; scsi_ulto3b(lba, cdb->addr); cdb->length = num_blocks; break; } case READ_10: case WRITE_10: { struct scsi_rw_10 *cdb = (struct scsi_rw_10 *)cmdbyt; lba = scsi_4btoul(cdb->addr); num_blocks = scsi_2btoul(cdb->length); lba += nbc; num_blocks -= nbc; scsi_ulto4b(lba, cdb->addr); scsi_ulto2b(num_blocks, cdb->length); break; } case READ_12: case WRITE_12: { struct scsi_rw_12 *cdb = (struct scsi_rw_12 *)cmdbyt; lba = scsi_4btoul(cdb->addr); num_blocks = scsi_4btoul(cdb->length); lba += nbc; num_blocks -= nbc; scsi_ulto4b(lba, cdb->addr); scsi_ulto4b(num_blocks, cdb->length); break; } case READ_16: case WRITE_16: { struct scsi_rw_16 *cdb = (struct scsi_rw_16 *)cmdbyt; lba = scsi_8btou64(cdb->addr); num_blocks = scsi_4btoul(cdb->length); lba += nbc; num_blocks -= nbc; scsi_u64to8b(lba, cdb->addr); scsi_ulto4b(num_blocks, cdb->length); break; } default: return -1; } return (0); } static void ctlfedone(struct cam_periph *periph, union ccb *done_ccb) { struct ctlfe_lun_softc *softc; struct ctlfe_softc *bus_softc; struct ctlfe_cmd_info *cmd_info; struct ccb_accept_tio *atio = NULL; union ctl_io *io = NULL; struct mtx *mtx; cam_status status; KASSERT((done_ccb->ccb_h.flags & CAM_UNLOCKED) != 0, ("CCB in ctlfedone() without CAM_UNLOCKED flag")); #ifdef CTLFE_DEBUG printf("%s: entered, func_code = %#x\n", __func__, done_ccb->ccb_h.func_code); #endif /* * At this point CTL has no known use case for device queue freezes. * In case some SIM think different -- drop its freeze right here. */ if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { cam_release_devq(periph->path, /*relsim_flags*/0, /*reduction*/0, /*timeout*/0, /*getcount_only*/0); done_ccb->ccb_h.status &= ~CAM_DEV_QFRZN; } softc = (struct ctlfe_lun_softc *)periph->softc; bus_softc = softc->parent_softc; mtx = cam_periph_mtx(periph); mtx_lock(mtx); switch (done_ccb->ccb_h.func_code) { case XPT_ACCEPT_TARGET_IO: { LIST_REMOVE(&done_ccb->ccb_h, periph_links.le); atio = &done_ccb->atio; status = atio->ccb_h.status & CAM_STATUS_MASK; if (status != CAM_CDB_RECVD) { ctlfe_free_ccb(periph, done_ccb); goto out; } resubmit: /* * Allocate a ctl_io, pass it to CTL, and wait for the * datamove or done. */ mtx_unlock(mtx); io = done_ccb->ccb_h.io_ptr; cmd_info = PRIV_INFO(io); ctl_zero_io(io); /* Save pointers on both sides */ PRIV_CCB(io) = done_ccb; PRIV_INFO(io) = cmd_info; done_ccb->ccb_h.io_ptr = io; /* * Only SCSI I/O comes down this path, resets, etc. come * down the immediate notify path below. */ io->io_hdr.io_type = CTL_IO_SCSI; io->io_hdr.nexus.initid = atio->init_id; io->io_hdr.nexus.targ_port = bus_softc->port.targ_port; if (bus_softc->hba_misc & PIM_EXTLUNS) { io->io_hdr.nexus.targ_lun = ctl_decode_lun( CAM_EXTLUN_BYTE_SWIZZLE(atio->ccb_h.target_lun)); } else { io->io_hdr.nexus.targ_lun = atio->ccb_h.target_lun; } io->scsiio.priority = atio->priority; io->scsiio.tag_num = atio->tag_id; switch (atio->tag_action) { case CAM_TAG_ACTION_NONE: io->scsiio.tag_type = CTL_TAG_UNTAGGED; break; case MSG_SIMPLE_TASK: io->scsiio.tag_type = CTL_TAG_SIMPLE; break; case MSG_HEAD_OF_QUEUE_TASK: io->scsiio.tag_type = CTL_TAG_HEAD_OF_QUEUE; break; case MSG_ORDERED_TASK: io->scsiio.tag_type = CTL_TAG_ORDERED; break; case MSG_ACA_TASK: io->scsiio.tag_type = CTL_TAG_ACA; break; default: io->scsiio.tag_type = CTL_TAG_UNTAGGED; printf("%s: unhandled tag type %#x!!\n", __func__, atio->tag_action); break; } if (atio->cdb_len > sizeof(io->scsiio.cdb)) { printf("%s: WARNING: CDB len %d > ctl_io space %zd\n", __func__, atio->cdb_len, sizeof(io->scsiio.cdb)); } io->scsiio.cdb_len = min(atio->cdb_len, sizeof(io->scsiio.cdb)); bcopy(atio_cdb_ptr(atio), io->scsiio.cdb, io->scsiio.cdb_len); #ifdef CTLFEDEBUG printf("%s: %u:%u:%u: tag %jx CDB %02x\n", __func__, io->io_hdr.nexus.initid, io->io_hdr.nexus.targ_port, io->io_hdr.nexus.targ_lun, io->scsiio.tag_num, io->scsiio.cdb[0]); #endif ctl_queue(io); return; } case XPT_CONT_TARGET_IO: { int srr = 0; uint32_t srr_off = 0; atio = (struct ccb_accept_tio *)done_ccb->ccb_h.ccb_atio; io = (union ctl_io *)atio->ccb_h.io_ptr; softc->ctios_sent--; #ifdef CTLFEDEBUG printf("%s: got XPT_CONT_TARGET_IO tag %#x flags %#x\n", __func__, atio->tag_id, done_ccb->ccb_h.flags); #endif /* * Handle SRR case were the data pointer is pushed back hack */ if ((done_ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_MESSAGE_RECV && done_ccb->csio.msg_ptr != NULL && done_ccb->csio.msg_ptr[0] == MSG_EXTENDED && done_ccb->csio.msg_ptr[1] == 5 && done_ccb->csio.msg_ptr[2] == 0) { srr = 1; srr_off = (done_ccb->csio.msg_ptr[3] << 24) | (done_ccb->csio.msg_ptr[4] << 16) | (done_ccb->csio.msg_ptr[5] << 8) | (done_ccb->csio.msg_ptr[6]); } /* * If we have an SRR and we're still sending data, we * should be able to adjust offsets and cycle again. * It is possible only if offset is from this datamove. */ if (srr && (io->io_hdr.flags & CTL_FLAG_DMA_INPROG) && srr_off >= io->scsiio.kern_rel_offset && srr_off < io->scsiio.kern_rel_offset + io->scsiio.kern_data_len) { io->scsiio.kern_data_resid = io->scsiio.kern_rel_offset + io->scsiio.kern_data_len - srr_off; io->scsiio.ext_data_filled = srr_off; io->scsiio.io_hdr.status = CTL_STATUS_NONE; io->io_hdr.flags |= CTL_FLAG_DMA_QUEUED; xpt_release_ccb(done_ccb); STAILQ_INSERT_HEAD(&softc->work_queue, &atio->ccb_h, periph_links.stqe); xpt_schedule(periph, CAM_PRIORITY_NORMAL); break; } /* * If status was being sent, the back end data is now history. * Hack it up and resubmit a new command with the CDB adjusted. * If the SIM does the right thing, all of the resid math * should work. */ if (srr && (io->io_hdr.flags & CTL_FLAG_DMA_INPROG) == 0) { xpt_release_ccb(done_ccb); if (ctlfe_adjust_cdb(atio, srr_off) == 0) { done_ccb = (union ccb *)atio; goto resubmit; } /* * Fall through to doom.... */ } if ((done_ccb->ccb_h.flags & CAM_SEND_STATUS) && (done_ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) io->io_hdr.flags |= CTL_FLAG_STATUS_SENT; /* * If we were sending status back to the initiator, free up * resources. If we were doing a datamove, call the * datamove done routine. */ if ((io->io_hdr.flags & CTL_FLAG_DMA_INPROG) == 0) { /* * If we asked to send sense data but it wasn't sent, * queue the I/O back to CTL for later REQUEST SENSE. */ if ((done_ccb->ccb_h.flags & CAM_SEND_SENSE) != 0 && (done_ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP && (done_ccb->ccb_h.status & CAM_SENT_SENSE) == 0 && (io = ctl_alloc_io_nowait(bus_softc->port.ctl_pool_ref)) != NULL) { PRIV_INFO(io) = PRIV_INFO( (union ctl_io *)atio->ccb_h.io_ptr); ctl_queue_sense(atio->ccb_h.io_ptr); atio->ccb_h.io_ptr = io; } /* Abort ATIO if CTIO sending status has failed. */ if ((done_ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { done_ccb->ccb_h.func_code = XPT_ABORT; done_ccb->cab.abort_ccb = (union ccb *)atio; xpt_action(done_ccb); } xpt_release_ccb(done_ccb); ctlfe_requeue_ccb(periph, (union ccb *)atio, /* unlock */1); return; } else { struct ctlfe_cmd_info *cmd_info; struct ccb_scsiio *csio; csio = &done_ccb->csio; cmd_info = PRIV_INFO(io); io->io_hdr.flags &= ~CTL_FLAG_DMA_INPROG; /* * Translate CAM status to CTL status. Success * does not change the overall, ctl_io status. In * that case we just set port_status to 0. If we * have a failure, though, set a data phase error * for the overall ctl_io. */ switch (done_ccb->ccb_h.status & CAM_STATUS_MASK) { case CAM_REQ_CMP: io->scsiio.kern_data_resid -= csio->dxfer_len - csio->resid; io->io_hdr.port_status = 0; break; default: /* * XXX KDM we probably need to figure out a * standard set of errors that the SIM * drivers should return in the event of a * data transfer failure. A data phase * error will at least point the user to a * data transfer error of some sort. * Hopefully the SIM printed out some * additional information to give the user * a clue what happened. */ io->io_hdr.port_status = 0xbad1; ctl_set_data_phase_error(&io->scsiio); /* * XXX KDM figure out residual. */ break; } /* * If we had to break this S/G list into multiple * pieces, figure out where we are in the list, and * continue sending pieces if necessary. */ if ((cmd_info->flags & CTLFE_CMD_PIECEWISE) && io->io_hdr.port_status == 0 && csio->resid == 0) { ccb_flags flags; uint8_t *data_ptr; uint32_t dxfer_len; flags = atio->ccb_h.flags & (CAM_DIS_DISCONNECT| CAM_TAG_ACTION_VALID); ctlfedata(softc, io, &flags, &data_ptr, &dxfer_len, &csio->sglist_cnt); if (((flags & CAM_SEND_STATUS) == 0) && (dxfer_len == 0)) { printf("%s: tag %04x no status or " "len cdb = %02x\n", __func__, atio->tag_id, atio_cdb_ptr(atio)[0]); printf("%s: tag %04x io status %#x\n", __func__, atio->tag_id, io->io_hdr.status); } cam_fill_ctio(csio, /*retries*/ 2, ctlfedone, flags, (flags & CAM_TAG_ACTION_VALID) ? MSG_SIMPLE_Q_TAG : 0, atio->tag_id, atio->init_id, 0, /*data_ptr*/ data_ptr, /*dxfer_len*/ dxfer_len, CTLFE_TIMEOUT * 1000); csio->ccb_h.flags |= CAM_UNLOCKED; csio->resid = 0; csio->ccb_h.ccb_atio = atio; io->io_hdr.flags |= CTL_FLAG_DMA_INPROG; softc->ctios_sent++; mtx_unlock(mtx); xpt_action((union ccb *)csio); } else { /* * Release the CTIO. The ATIO will be sent back * down to the SIM once we send status. */ xpt_release_ccb(done_ccb); mtx_unlock(mtx); ctl_datamove_done(io, false); } return; } break; } case XPT_IMMEDIATE_NOTIFY: { union ctl_io *io; struct ccb_immediate_notify *inot; int send_ctl_io; LIST_REMOVE(&done_ccb->ccb_h, periph_links.le); inot = &done_ccb->cin1; io = done_ccb->ccb_h.io_ptr; ctl_zero_io(io); send_ctl_io = 1; io->io_hdr.io_type = CTL_IO_TASK; PRIV_CCB(io) = done_ccb; inot->ccb_h.io_ptr = io; io->io_hdr.nexus.initid = inot->initiator_id; io->io_hdr.nexus.targ_port = bus_softc->port.targ_port; if (bus_softc->hba_misc & PIM_EXTLUNS) { io->io_hdr.nexus.targ_lun = ctl_decode_lun( CAM_EXTLUN_BYTE_SWIZZLE(inot->ccb_h.target_lun)); } else { io->io_hdr.nexus.targ_lun = inot->ccb_h.target_lun; } /* XXX KDM should this be the tag_id? */ io->taskio.tag_num = inot->seq_id; status = inot->ccb_h.status & CAM_STATUS_MASK; switch (status) { case CAM_SCSI_BUS_RESET: io->taskio.task_action = CTL_TASK_BUS_RESET; break; case CAM_BDR_SENT: io->taskio.task_action = CTL_TASK_TARGET_RESET; break; case CAM_MESSAGE_RECV: switch (inot->arg) { case MSG_ABORT_TASK_SET: io->taskio.task_action = CTL_TASK_ABORT_TASK_SET; break; case MSG_TARGET_RESET: io->taskio.task_action = CTL_TASK_TARGET_RESET; break; case MSG_ABORT_TASK: io->taskio.task_action = CTL_TASK_ABORT_TASK; break; case MSG_LOGICAL_UNIT_RESET: io->taskio.task_action = CTL_TASK_LUN_RESET; break; case MSG_CLEAR_TASK_SET: io->taskio.task_action = CTL_TASK_CLEAR_TASK_SET; break; case MSG_CLEAR_ACA: io->taskio.task_action = CTL_TASK_CLEAR_ACA; break; case MSG_QUERY_TASK: io->taskio.task_action = CTL_TASK_QUERY_TASK; break; case MSG_QUERY_TASK_SET: io->taskio.task_action = CTL_TASK_QUERY_TASK_SET; break; case MSG_QUERY_ASYNC_EVENT: io->taskio.task_action = CTL_TASK_QUERY_ASYNC_EVENT; break; case MSG_NOOP: send_ctl_io = 0; break; default: xpt_print(periph->path, "%s: unsupported INOT message 0x%x\n", __func__, inot->arg); send_ctl_io = 0; break; } break; default: xpt_print(periph->path, "%s: unsupported INOT status 0x%x\n", __func__, status); /* FALLTHROUGH */ case CAM_REQ_ABORTED: case CAM_REQ_INVALID: case CAM_DEV_NOT_THERE: case CAM_PROVIDE_FAIL: ctlfe_free_ccb(periph, done_ccb); goto out; } mtx_unlock(mtx); if (send_ctl_io != 0) { ctl_queue(io); } else { done_ccb->ccb_h.status = CAM_REQ_INPROG; done_ccb->ccb_h.func_code = XPT_NOTIFY_ACKNOWLEDGE; xpt_action(done_ccb); } return; } case XPT_NOTIFY_ACKNOWLEDGE: /* Queue this back down to the SIM as an immediate notify. */ done_ccb->ccb_h.status = CAM_REQ_INPROG; done_ccb->ccb_h.func_code = XPT_IMMEDIATE_NOTIFY; ctlfe_requeue_ccb(periph, done_ccb, /* unlock */1); return; case XPT_SET_SIM_KNOB: case XPT_GET_SIM_KNOB: case XPT_GET_SIM_KNOB_OLD: break; default: panic("%s: unexpected CCB type %#x", __func__, done_ccb->ccb_h.func_code); break; } out: mtx_unlock(mtx); } static void ctlfe_onoffline(void *arg, int online) { struct ctlfe_softc *bus_softc = arg; union ccb *ccb; cam_status status; struct cam_path *path; int set_wwnn = 0; status = xpt_create_path(&path, /*periph*/ NULL, bus_softc->path_id, CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD); if (status != CAM_REQ_CMP) { printf("%s: unable to create path!\n", __func__); return; } ccb = xpt_alloc_ccb(); xpt_setup_ccb(&ccb->ccb_h, path, CAM_PRIORITY_NONE); ccb->ccb_h.func_code = XPT_GET_SIM_KNOB; xpt_action(ccb); /* Check whether we should change WWNs. */ if (online != 0) { if ((ccb->knob.xport_specific.valid & KNOB_VALID_ADDRESS) != 0){ printf("%s: %s current WWNN %#jx\n", __func__, bus_softc->port_name, ccb->knob.xport_specific.fc.wwnn); printf("%s: %s current WWPN %#jx\n", __func__, bus_softc->port_name, ccb->knob.xport_specific.fc.wwpn); /* * If the user has specified a WWNN/WWPN, send them * down to the SIM. Otherwise, record what the SIM * has reported. */ if (bus_softc->port.wwnn != 0 && bus_softc->port.wwnn != ccb->knob.xport_specific.fc.wwnn) { ccb->knob.xport_specific.fc.wwnn = bus_softc->port.wwnn; set_wwnn = 1; } else { ctl_port_set_wwns(&bus_softc->port, true, ccb->knob.xport_specific.fc.wwnn, false, 0); } if (bus_softc->port.wwpn != 0 && bus_softc->port.wwpn != ccb->knob.xport_specific.fc.wwpn) { ccb->knob.xport_specific.fc.wwpn = bus_softc->port.wwpn; set_wwnn = 1; } else { ctl_port_set_wwns(&bus_softc->port, false, 0, true, ccb->knob.xport_specific.fc.wwpn); } } else { printf("%s: %s has no valid WWNN/WWPN\n", __func__, bus_softc->port_name); if (bus_softc->port.wwnn != 0) { ccb->knob.xport_specific.fc.wwnn = bus_softc->port.wwnn; set_wwnn = 1; } if (bus_softc->port.wwpn != 0) { ccb->knob.xport_specific.fc.wwpn = bus_softc->port.wwpn; set_wwnn = 1; } } } if (set_wwnn) { ccb->ccb_h.func_code = XPT_SET_SIM_KNOB; ccb->knob.xport_specific.valid = KNOB_VALID_ADDRESS; xpt_action(ccb); if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { printf("%s: %s (path id %d) failed set WWNs: %#x\n", __func__, bus_softc->port_name, bus_softc->path_id, ccb->ccb_h.status); } else { printf("%s: %s new WWNN %#jx\n", __func__, bus_softc->port_name, ccb->knob.xport_specific.fc.wwnn); printf("%s: %s new WWPN %#jx\n", __func__, bus_softc->port_name, ccb->knob.xport_specific.fc.wwpn); } } /* Check whether we should change role. */ if ((ccb->knob.xport_specific.valid & KNOB_VALID_ROLE) == 0 || ((online != 0) ^ ((ccb->knob.xport_specific.fc.role & KNOB_ROLE_TARGET) != 0)) != 0) { ccb->ccb_h.func_code = XPT_SET_SIM_KNOB; ccb->knob.xport_specific.valid = KNOB_VALID_ROLE; if (online) ccb->knob.xport_specific.fc.role |= KNOB_ROLE_TARGET; else ccb->knob.xport_specific.fc.role &= ~KNOB_ROLE_TARGET; xpt_action(ccb); if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { printf("%s: %s (path id %d) failed %s target role: %#x\n", __func__, bus_softc->port_name, bus_softc->path_id, online ? "enable" : "disable", ccb->ccb_h.status); } else { printf("%s: %s (path id %d) target role %s succeeded\n", __func__, bus_softc->port_name, bus_softc->path_id, online ? "enable" : "disable"); } } xpt_free_path(path); xpt_free_ccb(ccb); } static void ctlfe_online(void *arg) { struct ctlfe_softc *bus_softc; struct cam_path *path; cam_status status; struct ctlfe_lun_softc *lun_softc; struct cam_periph *periph; bus_softc = (struct ctlfe_softc *)arg; /* * Create the wildcard LUN before bringing the port online. */ status = xpt_create_path(&path, /*periph*/ NULL, bus_softc->path_id, CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD); if (status != CAM_REQ_CMP) { printf("%s: unable to create path for wildcard periph\n", __func__); return; } lun_softc = malloc(sizeof(*lun_softc), M_CTLFE, M_WAITOK | M_ZERO); xpt_path_lock(path); periph = cam_periph_find(path, "ctl"); if (periph != NULL) { /* We've already got a periph, no need to alloc a new one. */ xpt_path_unlock(path); xpt_free_path(path); free(lun_softc, M_CTLFE); return; } lun_softc->parent_softc = bus_softc; lun_softc->flags |= CTLFE_LUN_WILDCARD; status = cam_periph_alloc(ctlferegister, ctlfeoninvalidate, ctlfecleanup, ctlfestart, "ctl", CAM_PERIPH_BIO, path, ctlfeasync, 0, lun_softc); if ((status & CAM_STATUS_MASK) != CAM_REQ_CMP) { const struct cam_status_entry *entry; entry = cam_fetch_status_entry(status); printf("%s: CAM error %s (%#x) returned from " "cam_periph_alloc()\n", __func__, (entry != NULL) ? entry->status_text : "Unknown", status); free(lun_softc, M_CTLFE); } xpt_path_unlock(path); ctlfe_onoffline(arg, /*online*/ 1); xpt_free_path(path); } static void ctlfe_offline(void *arg) { struct ctlfe_softc *bus_softc; struct cam_path *path; cam_status status; struct cam_periph *periph; bus_softc = (struct ctlfe_softc *)arg; ctlfe_onoffline(arg, /*online*/ 0); /* * Disable the wildcard LUN for this port now that we have taken * the port offline. */ status = xpt_create_path(&path, /*periph*/ NULL, bus_softc->path_id, CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD); if (status != CAM_REQ_CMP) { printf("%s: unable to create path for wildcard periph\n", __func__); return; } xpt_path_lock(path); if ((periph = cam_periph_find(path, "ctl")) != NULL) cam_periph_invalidate(periph); xpt_path_unlock(path); xpt_free_path(path); } /* * This will get called to enable a LUN on every bus that is attached to * CTL. So we only need to create a path/periph for this particular bus. */ static int ctlfe_lun_enable(void *arg, int lun_id) { struct ctlfe_softc *bus_softc; struct ctlfe_lun_softc *softc; struct cam_path *path; struct cam_periph *periph; cam_status status; bus_softc = (struct ctlfe_softc *)arg; if (bus_softc->hba_misc & PIM_EXTLUNS) lun_id = CAM_EXTLUN_BYTE_SWIZZLE(ctl_encode_lun(lun_id)); status = xpt_create_path(&path, /*periph*/ NULL, bus_softc->path_id, bus_softc->target_id, lun_id); /* XXX KDM need some way to return status to CTL here? */ if (status != CAM_REQ_CMP) { printf("%s: could not create path, status %#x\n", __func__, status); return (1); } softc = malloc(sizeof(*softc), M_CTLFE, M_WAITOK | M_ZERO); xpt_path_lock(path); periph = cam_periph_find(path, "ctl"); if (periph != NULL) { /* We've already got a periph, no need to alloc a new one. */ xpt_path_unlock(path); xpt_free_path(path); free(softc, M_CTLFE); return (0); } softc->parent_softc = bus_softc; status = cam_periph_alloc(ctlferegister, ctlfeoninvalidate, ctlfecleanup, ctlfestart, "ctl", CAM_PERIPH_BIO, path, ctlfeasync, 0, softc); if ((status & CAM_STATUS_MASK) != CAM_REQ_CMP) { const struct cam_status_entry *entry; entry = cam_fetch_status_entry(status); printf("%s: CAM error %s (%#x) returned from " "cam_periph_alloc()\n", __func__, (entry != NULL) ? entry->status_text : "Unknown", status); free(softc, M_CTLFE); } xpt_path_unlock(path); xpt_free_path(path); return (0); } /* * This will get called when the user removes a LUN to disable that LUN * on every bus that is attached to CTL. */ static int ctlfe_lun_disable(void *arg, int lun_id) { struct ctlfe_softc *softc; struct ctlfe_lun_softc *lun_softc; softc = (struct ctlfe_softc *)arg; if (softc->hba_misc & PIM_EXTLUNS) lun_id = CAM_EXTLUN_BYTE_SWIZZLE(ctl_encode_lun(lun_id)); mtx_lock(&softc->lun_softc_mtx); STAILQ_FOREACH(lun_softc, &softc->lun_softc_list, links) { struct cam_path *path; path = lun_softc->periph->path; if ((xpt_path_target_id(path) == softc->target_id) && (xpt_path_lun_id(path) == lun_id)) { break; } } if (lun_softc == NULL) { mtx_unlock(&softc->lun_softc_mtx); printf("%s: can't find lun %d\n", __func__, lun_id); return (1); } cam_periph_acquire(lun_softc->periph); mtx_unlock(&softc->lun_softc_mtx); cam_periph_lock(lun_softc->periph); cam_periph_invalidate(lun_softc->periph); cam_periph_unlock(lun_softc->periph); cam_periph_release(lun_softc->periph); return (0); } static void ctlfe_dump_sim(struct cam_sim *sim) { printf("%s%d: max dev openings: %d, max tagged dev openings: %d\n", sim->sim_name, sim->unit_number, sim->max_dev_openings, sim->max_tagged_dev_openings); } /* * Assumes that the SIM lock is held. */ static void ctlfe_dump_queue(struct ctlfe_lun_softc *softc) { struct cam_periph *periph = softc->periph; struct ccb_hdr *hdr; struct ccb_getdevstats cgds; int num_items; memset(&cgds, 0, sizeof(cgds)); xpt_setup_ccb(&cgds.ccb_h, periph->path, CAM_PRIORITY_NORMAL); cgds.ccb_h.func_code = XPT_GDEV_STATS; xpt_action((union ccb *)&cgds); if ((cgds.ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) { xpt_print(periph->path, "devq: openings %d, active %d, " "allocated %d, queued %d, held %d\n", cgds.dev_openings, cgds.dev_active, cgds.allocated, cgds.queued, cgds.held); } num_items = 0; STAILQ_FOREACH(hdr, &softc->work_queue, periph_links.stqe) { union ctl_io *io = hdr->io_ptr; num_items++; /* * Only regular SCSI I/O is put on the work * queue, so we can print sense here. There may be no * sense if it's no the queue for a DMA, but this serves to * print out the CCB as well. * * XXX KDM switch this over to scsi_sense_print() when * CTL is merged in with CAM. */ ctl_io_error_print(io, NULL); /* * Print DMA status if we are DMA_QUEUED. */ if (io->io_hdr.flags & CTL_FLAG_DMA_QUEUED) { xpt_print(periph->path, "Total %u, Current %u, Resid %u\n", io->scsiio.kern_total_len, io->scsiio.kern_data_len, io->scsiio.kern_data_resid); } } xpt_print(periph->path, "%d requests waiting for CCBs\n", num_items); xpt_print(periph->path, "%d CTIOs outstanding\n", softc->ctios_sent); } /* * Datamove/done routine called by CTL. Put ourselves on the queue to * receive a CCB from CAM so we can queue the continue I/O request down * to the adapter. */ static void ctlfe_datamove(union ctl_io *io) { union ccb *ccb; struct cam_periph *periph; struct ctlfe_lun_softc *softc; CTL_IO_ASSERT(io, SCSI); io->scsiio.ext_data_filled = 0; ccb = PRIV_CCB(io); periph = xpt_path_periph(ccb->ccb_h.path); cam_periph_lock(periph); softc = (struct ctlfe_lun_softc *)periph->softc; io->io_hdr.flags |= CTL_FLAG_DMA_QUEUED; if ((io->io_hdr.status & CTL_STATUS_MASK) != CTL_STATUS_NONE) io->io_hdr.flags |= CTL_FLAG_STATUS_QUEUED; STAILQ_INSERT_TAIL(&softc->work_queue, &ccb->ccb_h, periph_links.stqe); xpt_schedule(periph, CAM_PRIORITY_NORMAL); cam_periph_unlock(periph); } static void ctlfe_done(union ctl_io *io) { union ccb *ccb; struct cam_periph *periph; struct ctlfe_lun_softc *softc; ccb = PRIV_CCB(io); periph = xpt_path_periph(ccb->ccb_h.path); cam_periph_lock(periph); softc = (struct ctlfe_lun_softc *)periph->softc; if (io->io_hdr.io_type == CTL_IO_TASK) { /* * Send the notify acknowledge down to the SIM, to let it * know we processed the task management command. */ ccb->ccb_h.status = CAM_REQ_INPROG; ccb->ccb_h.func_code = XPT_NOTIFY_ACKNOWLEDGE; switch (io->taskio.task_status) { case CTL_TASK_FUNCTION_COMPLETE: ccb->cna2.arg = CAM_RSP_TMF_COMPLETE; break; case CTL_TASK_FUNCTION_SUCCEEDED: ccb->cna2.arg = CAM_RSP_TMF_SUCCEEDED; ccb->ccb_h.flags |= CAM_SEND_STATUS; break; case CTL_TASK_FUNCTION_REJECTED: ccb->cna2.arg = CAM_RSP_TMF_REJECTED; ccb->ccb_h.flags |= CAM_SEND_STATUS; break; case CTL_TASK_LUN_DOES_NOT_EXIST: ccb->cna2.arg = CAM_RSP_TMF_INCORRECT_LUN; ccb->ccb_h.flags |= CAM_SEND_STATUS; break; case CTL_TASK_FUNCTION_NOT_SUPPORTED: ccb->cna2.arg = CAM_RSP_TMF_FAILED; ccb->ccb_h.flags |= CAM_SEND_STATUS; break; } ccb->cna2.arg |= scsi_3btoul(io->taskio.task_resp) << 8; xpt_action(ccb); } else if (io->io_hdr.flags & CTL_FLAG_STATUS_SENT) { ctlfe_requeue_ccb(periph, ccb, /* unlock */1); return; } else { io->io_hdr.flags |= CTL_FLAG_STATUS_QUEUED; STAILQ_INSERT_TAIL(&softc->work_queue, &ccb->ccb_h, periph_links.stqe); xpt_schedule(periph, CAM_PRIORITY_NORMAL); } cam_periph_unlock(periph); } static void ctlfe_dump(void) { struct ctlfe_softc *bus_softc; struct ctlfe_lun_softc *lun_softc; STAILQ_FOREACH(bus_softc, &ctlfe_softc_list, links) { ctlfe_dump_sim(bus_softc->sim); STAILQ_FOREACH(lun_softc, &bus_softc->lun_softc_list, links) ctlfe_dump_queue(lun_softc); } }