/*- * SPDX-License-Identifier: BSD-2-Clause * * Copyright (c) 2003 Silicon Graphics International Corp. * Copyright (c) 2014-2015 Alexander Motin * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. * * $Id: //depot/users/kenm/FreeBSD-test2/sys/cam/ctl/ctl_io.h#5 $ * $FreeBSD$ */ /* * CAM Target Layer data movement structures/interface. * * Author: Ken Merry */ #ifndef _CTL_IO_H_ #define _CTL_IO_H_ #ifndef _KERNEL #include #endif #define CTL_MAX_CDBLEN 32 /* * Uncomment this next line to enable printing out times for I/Os * that take longer than CTL_TIME_IO_SECS seconds to get to the datamove * and/or done stage. */ #define CTL_TIME_IO #ifdef CTL_TIME_IO #define CTL_TIME_IO_DEFAULT_SECS 90 #endif /* * Uncomment this next line to enable the CTL I/O delay feature. You * can delay I/O at two different points -- datamove and done. This is * useful for diagnosing abort conditions (for hosts that send an abort on a * timeout), and for determining how long a host's timeout is. */ //#define CTL_IO_DELAY typedef enum { CTL_STATUS_NONE, /* No status */ CTL_SUCCESS, /* Transaction completed successfully */ CTL_CMD_TIMEOUT, /* Command timed out, shouldn't happen here */ CTL_SEL_TIMEOUT, /* Selection timeout, shouldn't happen here */ CTL_ERROR, /* General CTL error XXX expand on this? */ CTL_SCSI_ERROR, /* SCSI error, look at status byte/sense data */ CTL_CMD_ABORTED, /* Command aborted, don't return status */ CTL_STATUS_MASK = 0xfff,/* Mask off any status flags */ CTL_AUTOSENSE = 0x1000 /* Autosense performed */ } ctl_io_status; /* * WARNING: Keep the data in/out/none flags where they are. They're used * in conjunction with ctl_cmd_flags. See comment above ctl_cmd_flags * definition in ctl_private.h. */ typedef enum { CTL_FLAG_NONE = 0x00000000, /* no flags */ CTL_FLAG_DATA_IN = 0x00000001, /* DATA IN */ CTL_FLAG_DATA_OUT = 0x00000002, /* DATA OUT */ CTL_FLAG_DATA_NONE = 0x00000003, /* no data */ CTL_FLAG_DATA_MASK = 0x00000003, CTL_FLAG_USER_TAG = 0x00000020, /* userland provides tag */ CTL_FLAG_USER_REQ = 0x00000040, /* request came from userland */ CTL_FLAG_ALLOCATED = 0x00000100, /* data space allocated */ CTL_FLAG_ABORT_STATUS = 0x00000400, /* return TASK ABORTED status */ CTL_FLAG_ABORT = 0x00000800, /* this I/O should be aborted */ CTL_FLAG_DMA_INPROG = 0x00001000, /* DMA in progress */ CTL_FLAG_DELAY_DONE = 0x00004000, /* delay injection done */ CTL_FLAG_INT_COPY = 0x00008000, /* internal copy, no done call*/ CTL_FLAG_SENT_2OTHER_SC = 0x00010000, CTL_FLAG_FROM_OTHER_SC = 0x00020000, CTL_FLAG_IS_WAS_ON_RTR = 0x00040000, /* Don't rerun cmd on failover*/ CTL_FLAG_BUS_ADDR = 0x00080000, /* ctl_sglist contains BUS addresses, not virtual ones*/ CTL_FLAG_IO_CONT = 0x00100000, /* Continue I/O instead of completing */ #if 0 CTL_FLAG_ALREADY_DONE = 0x00200000 /* I/O already completed */ #endif CTL_FLAG_NO_DATAMOVE = 0x00400000, CTL_FLAG_DMA_QUEUED = 0x00800000, /* DMA queued but not started*/ CTL_FLAG_STATUS_QUEUED = 0x01000000, /* Status queued but not sent*/ CTL_FLAG_FAILOVER = 0x04000000, /* Killed by a failover */ CTL_FLAG_IO_ACTIVE = 0x08000000, /* I/O active on this SC */ CTL_FLAG_STATUS_SENT = 0x10000000, /* Status sent by datamove */ CTL_FLAG_SERSEQ_DONE = 0x20000000 /* All storage I/O started */ } ctl_io_flags; struct ctl_lba_len { uint64_t lba; uint32_t len; }; struct ctl_lba_len_flags { uint64_t lba; uint32_t len; uint32_t flags; #define CTL_LLF_FUA 0x04000000 #define CTL_LLF_DPO 0x08000000 #define CTL_LLF_READ 0x10000000 #define CTL_LLF_WRITE 0x20000000 #define CTL_LLF_VERIFY 0x40000000 #define CTL_LLF_COMPARE 0x80000000 }; struct ctl_ptr_len_flags { uint8_t *ptr; uint32_t len; uint32_t flags; }; union ctl_priv { uint8_t bytes[sizeof(uint64_t) * 2]; uint64_t integer; uint64_t integers[2]; void *ptr; void *ptrs[2]; }; /* * Number of CTL private areas. */ #define CTL_NUM_PRIV 6 /* * Which private area are we using for a particular piece of data? */ #define CTL_PRIV_LUN 0 /* CTL LUN pointer goes here */ #define CTL_PRIV_LBA_LEN 1 /* Decoded LBA/len for read/write*/ #define CTL_PRIV_MODEPAGE 1 /* Modepage info for config write */ #define CTL_PRIV_BACKEND 2 /* Reserved for block, RAIDCore */ #define CTL_PRIV_BACKEND_LUN 3 /* Backend LUN pointer */ #define CTL_PRIV_FRONTEND 4 /* Frontend storage */ #define CTL_PRIV_FRONTEND2 5 /* Another frontend storage */ #define CTL_LUN(io) ((io)->io_hdr.ctl_private[CTL_PRIV_LUN].ptrs[0]) #define CTL_SOFTC(io) ((io)->io_hdr.ctl_private[CTL_PRIV_LUN].ptrs[1]) #define CTL_BACKEND_LUN(io) ((io)->io_hdr.ctl_private[CTL_PRIV_BACKEND_LUN].ptrs[0]) #define CTL_PORT(io) (((struct ctl_softc *)CTL_SOFTC(io))-> \ ctl_ports[(io)->io_hdr.nexus.targ_port]) /* * These are used only on Originating SC in XFER mode, where requests don't * ever reach backends, so we can reuse backend's private storage. */ #define CTL_RSGL(io) ((io)->io_hdr.ctl_private[CTL_PRIV_BACKEND].ptrs[0]) #define CTL_LSGL(io) ((io)->io_hdr.ctl_private[CTL_PRIV_BACKEND].ptrs[1]) #define CTL_RSGLT(io) ((struct ctl_sg_entry *)CTL_RSGL(io)) #define CTL_LSGLT(io) ((struct ctl_sg_entry *)CTL_LSGL(io)) #define CTL_INVALID_PORTNAME 0xFF #define CTL_UNMAPPED_IID 0xFF struct ctl_sg_entry { void *addr; size_t len; }; typedef enum { CTL_IO_NONE, CTL_IO_SCSI, CTL_IO_TASK, } ctl_io_type; struct ctl_nexus { uint32_t initid; /* Initiator ID */ uint32_t targ_port; /* Target port, filled in by PORT */ uint32_t targ_lun; /* Destination lun */ uint32_t targ_mapped_lun; /* Destination lun CTL-wide */ }; typedef enum { CTL_MSG_SERIALIZE, CTL_MSG_R2R, CTL_MSG_FINISH_IO, CTL_MSG_BAD_JUJU, CTL_MSG_MANAGE_TASKS, CTL_MSG_PERS_ACTION, CTL_MSG_DATAMOVE, CTL_MSG_DATAMOVE_DONE, CTL_MSG_UA, /* Set/clear UA on secondary. */ CTL_MSG_PORT_SYNC, /* Information about port. */ CTL_MSG_LUN_SYNC, /* Information about LUN. */ CTL_MSG_IID_SYNC, /* Information about initiator. */ CTL_MSG_LOGIN, /* Information about HA peer. */ CTL_MSG_MODE_SYNC, /* Mode page current content. */ CTL_MSG_FAILOVER /* Fake, never sent though the wire */ } ctl_msg_type; struct ctl_scsiio; struct ctl_io_hdr { uint32_t version; /* interface version XXX */ ctl_io_type io_type; /* task I/O, SCSI I/O, etc. */ ctl_msg_type msg_type; struct ctl_nexus nexus; /* Initiator, port, target, lun */ uint32_t iid_indx; /* the index into the iid mapping */ uint32_t flags; /* transaction flags */ uint32_t status; /* transaction status */ uint32_t port_status; /* trans status, set by PORT, 0 = good*/ uint32_t timeout; /* timeout in ms */ uint32_t retries; /* retry count */ #ifdef CTL_IO_DELAY struct callout delay_callout; #endif /* CTL_IO_DELAY */ #ifdef CTL_TIME_IO time_t start_time; /* I/O start time */ struct bintime start_bt; /* Timer start ticks */ struct bintime dma_start_bt; /* DMA start ticks */ struct bintime dma_bt; /* DMA total ticks */ #endif /* CTL_TIME_IO */ uint32_t num_dmas; /* Number of DMAs */ union ctl_io *remote_io; /* I/O counterpart on remote HA side */ union ctl_io *blocker; /* I/O blocking this one */ void *pool; /* I/O pool */ union ctl_priv ctl_private[CTL_NUM_PRIV];/* CTL private area */ TAILQ_HEAD(, ctl_io_hdr) blocked_queue; /* I/Os blocked by this one */ STAILQ_ENTRY(ctl_io_hdr) links; /* linked list pointer */ LIST_ENTRY(ctl_io_hdr) ooa_links; /* ooa_queue links */ TAILQ_ENTRY(ctl_io_hdr) blocked_links; /* blocked_queue links */ }; typedef enum { CTL_TAG_UNTAGGED, CTL_TAG_SIMPLE, CTL_TAG_ORDERED, CTL_TAG_HEAD_OF_QUEUE, CTL_TAG_ACA } ctl_tag_type; union ctl_io; typedef void (*ctl_ref)(void *arg, int diff); /* * SCSI passthrough I/O structure for the CAM Target Layer. Note * that some of these fields are here for completeness, but they aren't * used in the CTL implementation. e.g., timeout and retries won't be * used. * * Note: Make sure the io_hdr is *always* the first element in this * structure. */ struct ctl_scsiio { struct ctl_io_hdr io_hdr; /* common to all I/O types */ /* * The ext_* fields are generally intended for frontend use; CTL itself * doesn't modify or use them. */ uint32_t ext_sg_entries; /* 0 = no S/G list, > 0 = num entries */ uint8_t *ext_data_ptr; /* data buffer or S/G list */ uint32_t ext_data_len; /* Data transfer length */ uint32_t ext_data_filled; /* Amount of data filled so far */ /* * The number of scatter/gather entries in the list pointed to * by kern_data_ptr. 0 means there is no list, just a data pointer. */ uint32_t kern_sg_entries; uint32_t rem_sg_entries; /* Unused. */ /* * The data pointer or a pointer to the scatter/gather list. */ uint8_t *kern_data_ptr; /* * Length of the data buffer or scatter/gather list. It's also * the length of this particular piece of the data transfer, * ie. number of bytes expected to be transferred by the current * invocation of frontend's datamove() callback. It's always * less than or equal to kern_total_len. */ uint32_t kern_data_len; /* * Total length of data to be transferred during this particular * SCSI command, as decoded from SCSI CDB. */ uint32_t kern_total_len; /* * Amount of data left after the current data transfer. */ uint32_t kern_data_resid; /* * Byte offset of this transfer, equal to the amount of data * already transferred for this SCSI command during previous * datamove() invocations. */ uint32_t kern_rel_offset; struct scsi_sense_data sense_data; /* sense data */ uint8_t sense_len; /* Returned sense length */ uint8_t scsi_status; /* SCSI status byte */ uint8_t seridx; /* Serialization index. */ uint8_t priority; /* Command priority */ uint64_t tag_num; /* tag number */ ctl_tag_type tag_type; /* simple, ordered, head of queue,etc.*/ uint8_t cdb_len; /* CDB length */ uint8_t cdb[CTL_MAX_CDBLEN]; /* CDB */ int (*be_move_done)(union ctl_io *io, bool samethr); /* called by fe */ int (*io_cont)(union ctl_io *io); /* to continue processing */ ctl_ref kern_data_ref; /* Method to reference/release data */ void *kern_data_arg; /* Opaque argument for kern_data_ref() */ }; typedef enum { CTL_TASK_ABORT_TASK, CTL_TASK_ABORT_TASK_SET, CTL_TASK_CLEAR_ACA, CTL_TASK_CLEAR_TASK_SET, CTL_TASK_I_T_NEXUS_RESET, CTL_TASK_LUN_RESET, CTL_TASK_TARGET_RESET, CTL_TASK_BUS_RESET, CTL_TASK_PORT_LOGIN, CTL_TASK_PORT_LOGOUT, CTL_TASK_QUERY_TASK, CTL_TASK_QUERY_TASK_SET, CTL_TASK_QUERY_ASYNC_EVENT } ctl_task_type; typedef enum { CTL_TASK_FUNCTION_COMPLETE, CTL_TASK_FUNCTION_SUCCEEDED, CTL_TASK_FUNCTION_REJECTED, CTL_TASK_LUN_DOES_NOT_EXIST, CTL_TASK_FUNCTION_NOT_SUPPORTED } ctl_task_status; /* * Task management I/O structure. Aborts, bus resets, etc., are sent using * this structure. * * Note: Make sure the io_hdr is *always* the first element in this * structure. */ struct ctl_taskio { struct ctl_io_hdr io_hdr; /* common to all I/O types */ ctl_task_type task_action; /* Target Reset, Abort, etc. */ uint64_t tag_num; /* tag number */ ctl_tag_type tag_type; /* simple, ordered, etc. */ uint8_t task_status; /* Complete, Succeeded, etc. */ uint8_t task_resp[3];/* Response information */ }; /* * HA link messages. */ #define CTL_HA_VERSION 4 /* * Used for CTL_MSG_LOGIN. */ struct ctl_ha_msg_login { ctl_msg_type msg_type; int version; int ha_mode; int ha_id; int max_luns; int max_ports; int max_init_per_port; }; typedef enum { CTL_PR_REG_KEY, CTL_PR_UNREG_KEY, CTL_PR_PREEMPT, CTL_PR_CLEAR, CTL_PR_RESERVE, CTL_PR_RELEASE } ctl_pr_action; /* * The PR info is specifically for sending Persistent Reserve actions * to the other SC which it must also act on. * * Note: Make sure the io_hdr is *always* the first element in this * structure. */ struct ctl_pr_info { ctl_pr_action action; uint8_t sa_res_key[8]; uint8_t res_type; uint32_t residx; }; struct ctl_ha_msg_hdr { ctl_msg_type msg_type; uint32_t status; /* transaction status */ union ctl_io *original_sc; union ctl_io *serializing_sc; struct ctl_nexus nexus; /* Initiator, port, target, lun */ }; #define CTL_HA_MAX_SG_ENTRIES 16 #define CTL_HA_DATAMOVE_SEGMENT 131072 /* * Used for CTL_MSG_PERS_ACTION. */ struct ctl_ha_msg_pr { struct ctl_ha_msg_hdr hdr; struct ctl_pr_info pr_info; }; /* * Used for CTL_MSG_UA. */ struct ctl_ha_msg_ua { struct ctl_ha_msg_hdr hdr; int ua_all; int ua_set; int ua_type; uint8_t ua_info[8]; }; /* * The S/G handling here is a little different than the standard ctl_scsiio * structure, because we can't pass data by reference in between controllers. * The S/G list in the ctl_scsiio struct is normally passed in the * kern_data_ptr field. So kern_sg_entries here will always be non-zero, * even if there is only one entry. * * Used for CTL_MSG_DATAMOVE. */ struct ctl_ha_msg_dt { struct ctl_ha_msg_hdr hdr; ctl_io_flags flags; /* Only I/O flags are used here */ uint32_t sg_sequence; /* S/G portion number */ uint8_t sg_last; /* last S/G batch = 1 */ uint32_t sent_sg_entries; /* previous S/G count */ uint32_t cur_sg_entries; /* current S/G entries */ uint32_t kern_sg_entries; /* total S/G entries */ uint32_t kern_data_len; /* Length of this S/G list */ uint32_t kern_total_len; /* Total length of this transaction */ uint32_t kern_data_resid; /* Length left to transfer after this*/ uint32_t kern_rel_offset; /* Byte Offset of this transfer */ struct ctl_sg_entry sg_list[CTL_HA_MAX_SG_ENTRIES]; }; /* * Used for CTL_MSG_SERIALIZE, CTL_MSG_FINISH_IO, CTL_MSG_BAD_JUJU, * and CTL_MSG_DATAMOVE_DONE. */ struct ctl_ha_msg_scsi { struct ctl_ha_msg_hdr hdr; uint64_t tag_num; /* tag number */ ctl_tag_type tag_type; /* simple, ordered, etc. */ uint8_t cdb[CTL_MAX_CDBLEN]; /* CDB */ uint8_t cdb_len; /* CDB length */ uint8_t scsi_status; /* SCSI status byte */ uint8_t sense_len; /* Returned sense length */ uint8_t priority; /* Command priority */ uint32_t port_status; /* trans status, set by FETD, 0 = good*/ uint32_t kern_data_resid; /* for DATAMOVE_DONE */ struct scsi_sense_data sense_data; /* sense data */ }; /* * Used for CTL_MSG_MANAGE_TASKS. */ struct ctl_ha_msg_task { struct ctl_ha_msg_hdr hdr; ctl_task_type task_action; /* Target Reset, Abort, etc. */ uint64_t tag_num; /* tag number */ ctl_tag_type tag_type; /* simple, ordered, etc. */ }; /* * Used for CTL_MSG_PORT_SYNC. */ struct ctl_ha_msg_port { struct ctl_ha_msg_hdr hdr; int port_type; int physical_port; int virtual_port; int status; int name_len; int lun_map_len; int port_devid_len; int target_devid_len; int init_devid_len; uint8_t data[]; }; /* * Used for CTL_MSG_LUN_SYNC. */ struct ctl_ha_msg_lun { struct ctl_ha_msg_hdr hdr; int flags; unsigned int pr_generation; uint32_t pr_res_idx; uint8_t pr_res_type; int lun_devid_len; int pr_key_count; uint8_t data[]; }; struct ctl_ha_msg_lun_pr_key { uint32_t pr_iid; uint64_t pr_key; }; /* * Used for CTL_MSG_IID_SYNC. */ struct ctl_ha_msg_iid { struct ctl_ha_msg_hdr hdr; int in_use; int name_len; uint64_t wwpn; uint8_t data[]; }; /* * Used for CTL_MSG_MODE_SYNC. */ struct ctl_ha_msg_mode { struct ctl_ha_msg_hdr hdr; uint8_t page_code; uint8_t subpage; uint16_t page_len; uint8_t data[]; }; union ctl_ha_msg { struct ctl_ha_msg_hdr hdr; struct ctl_ha_msg_task task; struct ctl_ha_msg_scsi scsi; struct ctl_ha_msg_dt dt; struct ctl_ha_msg_pr pr; struct ctl_ha_msg_ua ua; struct ctl_ha_msg_port port; struct ctl_ha_msg_lun lun; struct ctl_ha_msg_iid iid; struct ctl_ha_msg_login login; struct ctl_ha_msg_mode mode; }; struct ctl_prio { struct ctl_io_hdr io_hdr; struct ctl_ha_msg_pr pr_msg; }; union ctl_io { struct ctl_io_hdr io_hdr; /* common to all I/O types */ struct ctl_scsiio scsiio; /* Normal SCSI commands */ struct ctl_taskio taskio; /* SCSI task management/reset */ struct ctl_prio presio; /* update per. res info on other SC */ }; #ifdef _KERNEL union ctl_io *ctl_alloc_io(void *pool_ref); union ctl_io *ctl_alloc_io_nowait(void *pool_ref); void ctl_free_io(union ctl_io *io); void ctl_zero_io(union ctl_io *io); #endif /* _KERNEL */ #endif /* _CTL_IO_H_ */ /* * vim: ts=8 */