/*- * SPDX-License-Identifier: BSD-2-Clause * * Copyright (c) 2012-2013 Thomas Skibo * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * A host-controller driver for Zynq-7000's USB OTG controller. * * Reference: Zynq-7000 All Programmable SoC Technical Reference Manual. * (v1.4) November 16, 2012. Xilinx doc UG585. Ch. 15 covers the USB * controller and register definitions are in appendix B.34. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* Register definitions. */ #define ZY7_USB_ID 0x0000 #define ZY7_USB_HWGENERAL 0x0004 #define ZY7_USB_HWHOST 0x0008 #define ZY7_USB_HWDEVICE 0x000c #define ZY7_USB_HWTXBUF 0x0010 #define ZY7_USB_HWRXBUF 0x0014 #define ZY7_USB_GPTIMER0LD 0x0080 #define ZY7_USB_GPTIMER0CTRL 0x0084 #define ZY7_USB_GPTIMER1LD 0x0088 #define ZY7_USB_GPTIMER1CTRL 0x008c #define ZY7_USB_SBUSCFG 0x0090 #define ZY7_USB_CAPLENGTH_HCIVERSION 0x0100 #define ZY7_USB_HCSPARAMS 0x0104 #define ZY7_USB_HCCPARAMS 0x0108 #define ZY7_USB_DCIVERSION 0x0120 #define ZY7_USB_DCCPARAMS 0x0124 #define ZY7_USB_USBCMD 0x0140 #define ZY7_USB_USBSTS 0x0144 #define ZY7_USB_USBINTR 0x0148 #define ZY7_USB_FRINDEX 0x014c #define ZY7_USB_PERIODICLISTBASE_DEICEADDR 0x0154 #define ZY7_USB_ASYNCLISTADDR_ENDPOINTLISTADDR 0x0158 #define ZY7_USB_TTCTRL 0x015c #define ZY7_USB_BURSTSIZE 0x0160 #define ZY7_USB_TXFILLTUNING 0x0164 #define ZY7_USB_TXFILLTUNING_TXFIFOTHRES_SHFT 16 #define ZY7_USB_TXFILLTUNING_TXFIFOTHRES_MASK (0x3f<<16) #define ZY7_USB_TXTFILLTUNING 0x0168 #define ZY7_USB_IC_USB 0x016c #define ZY7_USB_ULPI_VIEWPORT 0x0170 #define ZY7_USB_ULPI_VIEWPORT_WU (1<<31) #define ZY7_USB_ULPI_VIEWPORT_RUN (1<<30) #define ZY7_USB_ULPI_VIEWPORT_RW (1<<29) #define ZY7_USB_ULPI_VIEWPORT_SS (1<<27) #define ZY7_USB_ULPI_VIEWPORT_PORT_MASK (7<<24) #define ZY7_USB_ULPI_VIEWPORT_PORT_SHIFT 24 #define ZY7_USB_ULPI_VIEWPORT_ADDR_MASK (0xff<<16) #define ZY7_USB_ULPI_VIEWPORT_ADDR_SHIFT 16 #define ZY7_USB_ULPI_VIEWPORT_DATARD_MASK (0xff<<8) #define ZY7_USB_ULPI_VIEWPORT_DATARD_SHIFT 8 #define ZY7_USB_ULPI_VIEWPORT_DATAWR_MASK (0xff<<0) #define ZY7_USB_ULPI_VIEWPORT_DATAWR_SHIFT 0 #define ZY7_USB_ENDPTNAK 0x0178 #define ZY7_USB_ENDPTNAKEN 0x017c #define ZY7_USB_CONFIGFLAG 0x0180 #define ZY7_USB_PORTSC(n) (0x0180+4*(n)) #define ZY7_USB_PORTSC_PTS_MASK (3<<30) #define ZY7_USB_PORTSC_PTS_SHIFT 30 #define ZY7_USB_PORTSC_PTS_UTMI (0<<30) #define ZY7_USB_PORTSC_PTS_ULPI (2<<30) #define ZY7_USB_PORTSC_PTS_SERIAL (3<<30) #define ZY7_USB_PORTSC_PTW (1<<28) #define ZY7_USB_PORTSC_PTS2 (1<<25) #define ZY7_USB_OTGSC 0x01a4 #define ZY7_USB_USBMODE 0x01a8 #define ZY7_USB_ENDPTSETUPSTAT 0x01ac #define ZY7_USB_ENDPTPRIME 0x01b0 #define ZY7_USB_ENDPTFLUSH 0x01b4 #define ZY7_USB_ENDPTSTAT 0x01b8 #define ZY7_USB_ENDPTCOMPLETE 0x01bc #define ZY7_USB_ENDPTCTRL(n) (0x01c0+4*(n)) #define EHCI_REG_OFFSET ZY7_USB_CAPLENGTH_HCIVERSION #define EHCI_REG_SIZE 0x100 static void zy7_ehci_post_reset(struct ehci_softc *ehci_softc) { uint32_t usbmode; /* Force HOST mode */ usbmode = EOREAD4(ehci_softc, EHCI_USBMODE_NOLPM); usbmode &= ~EHCI_UM_CM; usbmode |= EHCI_UM_CM_HOST; EOWRITE4(ehci_softc, EHCI_USBMODE_NOLPM, usbmode); } static int zy7_phy_config(device_t dev, bus_space_tag_t io_tag, bus_space_handle_t bsh) { phandle_t node; char buf[64]; uint32_t portsc; int tries; node = ofw_bus_get_node(dev); if (OF_getprop(node, "phy_type", buf, sizeof(buf)) > 0) { portsc = bus_space_read_4(io_tag, bsh, ZY7_USB_PORTSC(1)); portsc &= ~(ZY7_USB_PORTSC_PTS_MASK | ZY7_USB_PORTSC_PTW | ZY7_USB_PORTSC_PTS2); if (strcmp(buf,"ulpi") == 0) portsc |= ZY7_USB_PORTSC_PTS_ULPI; else if (strcmp(buf,"utmi") == 0) portsc |= ZY7_USB_PORTSC_PTS_UTMI; else if (strcmp(buf,"utmi-wide") == 0) portsc |= (ZY7_USB_PORTSC_PTS_UTMI | ZY7_USB_PORTSC_PTW); else if (strcmp(buf, "serial") == 0) portsc |= ZY7_USB_PORTSC_PTS_SERIAL; bus_space_write_4(io_tag, bsh, ZY7_USB_PORTSC(1), portsc); } if (OF_getprop(node, "phy_vbus_ext", buf, sizeof(buf)) >= 0) { /* Tell PHY that VBUS is supplied externally. */ bus_space_write_4(io_tag, bsh, ZY7_USB_ULPI_VIEWPORT, ZY7_USB_ULPI_VIEWPORT_RUN | ZY7_USB_ULPI_VIEWPORT_RW | (0 << ZY7_USB_ULPI_VIEWPORT_PORT_SHIFT) | (0x0b << ZY7_USB_ULPI_VIEWPORT_ADDR_SHIFT) | (0x60 << ZY7_USB_ULPI_VIEWPORT_DATAWR_SHIFT) ); tries = 100; while ((bus_space_read_4(io_tag, bsh, ZY7_USB_ULPI_VIEWPORT) & ZY7_USB_ULPI_VIEWPORT_RUN) != 0) { if (--tries < 0) return (-1); DELAY(1); } } return (0); } static int zy7_ehci_probe(device_t dev) { if (!ofw_bus_status_okay(dev)) return (ENXIO); if (!ofw_bus_is_compatible(dev, "xlnx,zy7_ehci")) return (ENXIO); device_set_desc(dev, "Zynq-7000 EHCI USB 2.0 controller"); return (0); } static int zy7_ehci_detach(device_t dev); static int zy7_ehci_attach(device_t dev) { ehci_softc_t *sc = device_get_softc(dev); bus_space_handle_t bsh; int err, rid; /* initialize some bus fields */ sc->sc_bus.parent = dev; sc->sc_bus.devices = sc->sc_devices; sc->sc_bus.devices_max = EHCI_MAX_DEVICES; sc->sc_bus.dma_bits = 32; /* get all DMA memory */ if (usb_bus_mem_alloc_all(&sc->sc_bus, USB_GET_DMA_TAG(dev), &ehci_iterate_hw_softc)) return (ENOMEM); /* Allocate memory. */ rid = 0; sc->sc_io_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, RF_ACTIVE); if (sc->sc_io_res == NULL) { device_printf(dev, "Can't allocate memory"); zy7_ehci_detach(dev); return (ENOMEM); } sc->sc_io_tag = rman_get_bustag(sc->sc_io_res); bsh = rman_get_bushandle(sc->sc_io_res); sc->sc_io_size = EHCI_REG_SIZE; if (bus_space_subregion(sc->sc_io_tag, bsh, EHCI_REG_OFFSET, sc->sc_io_size, &sc->sc_io_hdl) != 0) panic("%s: unable to subregion USB host registers", device_get_name(dev)); /* Allocate IRQ. */ rid = 0; sc->sc_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE); if (sc->sc_irq_res == NULL) { device_printf(dev, "Can't allocate IRQ\n"); zy7_ehci_detach(dev); return (ENOMEM); } /* Add USB device */ sc->sc_bus.bdev = device_add_child(dev, "usbus", -1); if (!sc->sc_bus.bdev) { device_printf(dev, "Could not add USB device\n"); zy7_ehci_detach(dev); return (ENXIO); } device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus); device_set_desc(sc->sc_bus.bdev, "Zynq-7000 ehci USB 2.0 controller"); strcpy(sc->sc_vendor, "Xilinx"); /* or IP vendor? */ /* Activate the interrupt */ err = bus_setup_intr(dev, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE, NULL, (driver_intr_t *)ehci_interrupt, sc, &sc->sc_intr_hdl); if (err) { device_printf(dev, "Cannot setup IRQ\n"); zy7_ehci_detach(dev); return (err); } /* Customization. */ sc->sc_flags |= EHCI_SCFLG_TT | EHCI_SCFLG_NORESTERM; sc->sc_vendor_post_reset = zy7_ehci_post_reset; sc->sc_vendor_get_port_speed = ehci_get_port_speed_portsc; /* Modify FIFO burst threshold from 2 to 8. */ bus_space_write_4(sc->sc_io_tag, bsh, ZY7_USB_TXFILLTUNING, 8 << ZY7_USB_TXFILLTUNING_TXFIFOTHRES_SHFT); /* Handle PHY options. */ if (zy7_phy_config(dev, sc->sc_io_tag, bsh) < 0) { device_printf(dev, "Cannot config phy!\n"); zy7_ehci_detach(dev); return (EIO); } /* Init ehci. */ err = ehci_init(sc); if (!err) { sc->sc_flags |= EHCI_SCFLG_DONEINIT; err = device_probe_and_attach(sc->sc_bus.bdev); } if (err) { device_printf(dev, "USB init failed err=%d\n", err); zy7_ehci_detach(dev); return (err); } return (0); } static int zy7_ehci_detach(device_t dev) { ehci_softc_t *sc = device_get_softc(dev); /* during module unload there are lots of children leftover */ device_delete_children(dev); if ((sc->sc_flags & EHCI_SCFLG_DONEINIT) != 0) { ehci_detach(sc); sc->sc_flags &= ~EHCI_SCFLG_DONEINIT; } if (sc->sc_irq_res) { if (sc->sc_intr_hdl != NULL) bus_teardown_intr(dev, sc->sc_irq_res, sc->sc_intr_hdl); bus_release_resource(dev, SYS_RES_IRQ, rman_get_rid(sc->sc_irq_res), sc->sc_irq_res); } if (sc->sc_io_res) bus_release_resource(dev, SYS_RES_MEMORY, rman_get_rid(sc->sc_io_res), sc->sc_io_res); usb_bus_mem_free_all(&sc->sc_bus, &ehci_iterate_hw_softc); return (0); } static device_method_t ehci_methods[] = { /* Device interface */ DEVMETHOD(device_probe, zy7_ehci_probe), DEVMETHOD(device_attach, zy7_ehci_attach), DEVMETHOD(device_detach, zy7_ehci_detach), DEVMETHOD(device_suspend, bus_generic_suspend), DEVMETHOD(device_resume, bus_generic_resume), DEVMETHOD(device_shutdown, bus_generic_shutdown), /* Bus interface */ DEVMETHOD(bus_print_child, bus_generic_print_child), DEVMETHOD_END }; static driver_t ehci_driver = { "ehci", ehci_methods, sizeof(struct ehci_softc), }; DRIVER_MODULE(zy7_ehci, simplebus, ehci_driver, NULL, NULL); MODULE_DEPEND(zy7_ehci, usb, 1, 1, 1);