/*- * SPDX-License-Identifier: BSD-2-Clause * * Copyright (c) 2014 Ruslan Bukin * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Vybrid Family Synchronous Audio Interface (SAI) * Chapter 51, Vybrid Reference Manual, Rev. 5, 07/2013 */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define I2S_TCSR 0x00 /* SAI Transmit Control */ #define I2S_TCR1 0x04 /* SAI Transmit Configuration 1 */ #define I2S_TCR2 0x08 /* SAI Transmit Configuration 2 */ #define I2S_TCR3 0x0C /* SAI Transmit Configuration 3 */ #define I2S_TCR4 0x10 /* SAI Transmit Configuration 4 */ #define I2S_TCR5 0x14 /* SAI Transmit Configuration 5 */ #define I2S_TDR0 0x20 /* SAI Transmit Data */ #define I2S_TFR0 0x40 /* SAI Transmit FIFO */ #define I2S_TMR 0x60 /* SAI Transmit Mask */ #define I2S_RCSR 0x80 /* SAI Receive Control */ #define I2S_RCR1 0x84 /* SAI Receive Configuration 1 */ #define I2S_RCR2 0x88 /* SAI Receive Configuration 2 */ #define I2S_RCR3 0x8C /* SAI Receive Configuration 3 */ #define I2S_RCR4 0x90 /* SAI Receive Configuration 4 */ #define I2S_RCR5 0x94 /* SAI Receive Configuration 5 */ #define I2S_RDR0 0xA0 /* SAI Receive Data */ #define I2S_RFR0 0xC0 /* SAI Receive FIFO */ #define I2S_RMR 0xE0 /* SAI Receive Mask */ #define TCR1_TFW_M 0x1f /* Transmit FIFO Watermark Mask */ #define TCR1_TFW_S 0 /* Transmit FIFO Watermark Shift */ #define TCR2_MSEL_M 0x3 /* MCLK Select Mask*/ #define TCR2_MSEL_S 26 /* MCLK Select Shift*/ #define TCR2_BCP (1 << 25) /* Bit Clock Polarity */ #define TCR2_BCD (1 << 24) /* Bit Clock Direction */ #define TCR3_TCE (1 << 16) /* Transmit Channel Enable */ #define TCR4_FRSZ_M 0x1f /* Frame size Mask */ #define TCR4_FRSZ_S 16 /* Frame size Shift */ #define TCR4_SYWD_M 0x1f /* Sync Width Mask */ #define TCR4_SYWD_S 8 /* Sync Width Shift */ #define TCR4_MF (1 << 4) /* MSB First */ #define TCR4_FSE (1 << 3) /* Frame Sync Early */ #define TCR4_FSP (1 << 1) /* Frame Sync Polarity Low */ #define TCR4_FSD (1 << 0) /* Frame Sync Direction Master */ #define TCR5_FBT_M 0x1f /* First Bit Shifted */ #define TCR5_FBT_S 8 /* First Bit Shifted */ #define TCR5_W0W_M 0x1f /* Word 0 Width */ #define TCR5_W0W_S 16 /* Word 0 Width */ #define TCR5_WNW_M 0x1f /* Word N Width */ #define TCR5_WNW_S 24 /* Word N Width */ #define TCSR_TE (1 << 31) /* Transmitter Enable */ #define TCSR_BCE (1 << 28) /* Bit Clock Enable */ #define TCSR_FRDE (1 << 0) /* FIFO Request DMA Enable */ #define SAI_NCHANNELS 1 static MALLOC_DEFINE(M_SAI, "sai", "sai audio"); struct sai_rate { uint32_t speed; uint32_t div; /* Bit Clock Divide. Division value is (div + 1) * 2. */ uint32_t mfi; /* PLL4 Multiplication Factor Integer */ uint32_t mfn; /* PLL4 Multiplication Factor Numerator */ uint32_t mfd; /* PLL4 Multiplication Factor Denominator */ }; /* * Bit clock divider formula * (div + 1) * 2 = MCLK/(nch * LRCLK * bits/1000000), * where: * MCLK - master clock * nch - number of channels * LRCLK - left right clock * e.g. (div + 1) * 2 = 16.9344/(2 * 44100 * 24/1000000) * * Example for 96khz, 24bit, 18.432 Mhz mclk (192fs) * { 96000, 1, 18, 40176000, 93000000 }, */ static struct sai_rate rate_map[] = { { 44100, 7, 33, 80798400, 93000000 }, /* 33.8688 Mhz */ { 96000, 3, 36, 80352000, 93000000 }, /* 36.864 Mhz */ { 192000, 1, 36, 80352000, 93000000 }, /* 36.864 Mhz */ { 0, 0 }, }; struct sc_info { struct resource *res[2]; bus_space_tag_t bst; bus_space_handle_t bsh; device_t dev; struct mtx *lock; uint32_t speed; uint32_t period; void *ih; int pos; int dma_size; bus_dma_tag_t dma_tag; bus_dmamap_t dma_map; bus_addr_t buf_base_phys; uint32_t *buf_base; struct tcd_conf *tcd; struct sai_rate *sr; struct edma_softc *edma_sc; int edma_chnum; }; /* Channel registers */ struct sc_chinfo { struct snd_dbuf *buffer; struct pcm_channel *channel; struct sc_pcminfo *parent; /* Channel information */ uint32_t dir; uint32_t format; /* Flags */ uint32_t run; }; /* PCM device private data */ struct sc_pcminfo { device_t dev; uint32_t (*ih) (struct sc_pcminfo *scp); uint32_t chnum; struct sc_chinfo chan[SAI_NCHANNELS]; struct sc_info *sc; }; static struct resource_spec sai_spec[] = { { SYS_RES_MEMORY, 0, RF_ACTIVE }, { SYS_RES_IRQ, 0, RF_ACTIVE }, { -1, 0 } }; static int setup_dma(struct sc_pcminfo *scp); static void setup_sai(struct sc_info *); static void sai_configure_clock(struct sc_info *); /* * Mixer interface. */ static int saimixer_init(struct snd_mixer *m) { struct sc_pcminfo *scp; struct sc_info *sc; int mask; scp = mix_getdevinfo(m); sc = scp->sc; if (sc == NULL) return -1; mask = SOUND_MASK_PCM; snd_mtxlock(sc->lock); pcm_setflags(scp->dev, pcm_getflags(scp->dev) | SD_F_SOFTPCMVOL); mix_setdevs(m, mask); snd_mtxunlock(sc->lock); return (0); } static int saimixer_set(struct snd_mixer *m, unsigned dev, unsigned left, unsigned right) { #if 0 struct sc_pcminfo *scp; scp = mix_getdevinfo(m); device_printf(scp->dev, "saimixer_set() %d %d\n", left, right); #endif return (0); } static kobj_method_t saimixer_methods[] = { KOBJMETHOD(mixer_init, saimixer_init), KOBJMETHOD(mixer_set, saimixer_set), KOBJMETHOD_END }; MIXER_DECLARE(saimixer); /* * Channel interface. */ static void * saichan_init(kobj_t obj, void *devinfo, struct snd_dbuf *b, struct pcm_channel *c, int dir) { struct sc_pcminfo *scp; struct sc_chinfo *ch; struct sc_info *sc; scp = (struct sc_pcminfo *)devinfo; sc = scp->sc; snd_mtxlock(sc->lock); ch = &scp->chan[0]; ch->dir = dir; ch->run = 0; ch->buffer = b; ch->channel = c; ch->parent = scp; snd_mtxunlock(sc->lock); if (sndbuf_setup(ch->buffer, sc->buf_base, sc->dma_size) != 0) { device_printf(scp->dev, "Can't setup sndbuf.\n"); return NULL; } return ch; } static int saichan_free(kobj_t obj, void *data) { struct sc_chinfo *ch = data; struct sc_pcminfo *scp = ch->parent; struct sc_info *sc = scp->sc; #if 0 device_printf(scp->dev, "saichan_free()\n"); #endif snd_mtxlock(sc->lock); /* TODO: free channel buffer */ snd_mtxunlock(sc->lock); return (0); } static int saichan_setformat(kobj_t obj, void *data, uint32_t format) { struct sc_chinfo *ch = data; ch->format = format; return (0); } static uint32_t saichan_setspeed(kobj_t obj, void *data, uint32_t speed) { struct sc_pcminfo *scp; struct sc_chinfo *ch; struct sai_rate *sr; struct sc_info *sc; int threshold; int i; ch = data; scp = ch->parent; sc = scp->sc; sr = NULL; /* First look for equal frequency. */ for (i = 0; rate_map[i].speed != 0; i++) { if (rate_map[i].speed == speed) sr = &rate_map[i]; } /* If no match, just find nearest. */ if (sr == NULL) { for (i = 0; rate_map[i].speed != 0; i++) { sr = &rate_map[i]; threshold = sr->speed + ((rate_map[i + 1].speed != 0) ? ((rate_map[i + 1].speed - sr->speed) >> 1) : 0); if (speed < threshold) break; } } sc->sr = sr; sai_configure_clock(sc); return (sr->speed); } static void sai_configure_clock(struct sc_info *sc) { struct sai_rate *sr; int reg; sr = sc->sr; /* * Manual says that TCR/RCR registers must not be * altered when TCSR[TE] is set. * We ignore it since we have problem sometimes * after re-enabling transmitter (DMA goes stall). */ reg = READ4(sc, I2S_TCR2); reg &= ~(0xff << 0); reg |= (sr->div << 0); WRITE4(sc, I2S_TCR2, reg); pll4_configure_output(sr->mfi, sr->mfn, sr->mfd); } static uint32_t saichan_setblocksize(kobj_t obj, void *data, uint32_t blocksize) { struct sc_chinfo *ch = data; struct sc_pcminfo *scp = ch->parent; struct sc_info *sc = scp->sc; sndbuf_resize(ch->buffer, sc->dma_size / blocksize, blocksize); sc->period = sndbuf_getblksz(ch->buffer); return (sc->period); } uint32_t sai_dma_intr(void *arg, int chn); uint32_t sai_dma_intr(void *arg, int chn) { struct sc_pcminfo *scp; struct sc_chinfo *ch; struct sc_info *sc; struct tcd_conf *tcd; scp = arg; ch = &scp->chan[0]; sc = scp->sc; tcd = sc->tcd; sc->pos += (tcd->nbytes * tcd->nmajor); if (sc->pos >= sc->dma_size) sc->pos -= sc->dma_size; if (ch->run) chn_intr(ch->channel); return (0); } static int find_edma_controller(struct sc_info *sc) { struct edma_softc *edma_sc; phandle_t node, edma_node; int edma_src_transmit; int edma_mux_group; int edma_device_id; device_t edma_dev; int dts_value; int len; int i; if ((node = ofw_bus_get_node(sc->dev)) == -1) return (ENXIO); if ((len = OF_getproplen(node, "edma-controller")) <= 0) return (ENXIO); if ((len = OF_getproplen(node, "edma-src-transmit")) <= 0) return (ENXIO); if ((len = OF_getproplen(node, "edma-mux-group")) <= 0) return (ENXIO); OF_getencprop(node, "edma-src-transmit", &dts_value, len); edma_src_transmit = dts_value; OF_getencprop(node, "edma-mux-group", &dts_value, len); edma_mux_group = dts_value; OF_getencprop(node, "edma-controller", &dts_value, len); edma_node = OF_node_from_xref(dts_value); if ((len = OF_getproplen(edma_node, "device-id")) <= 0) { return (ENXIO); } OF_getencprop(edma_node, "device-id", &dts_value, len); edma_device_id = dts_value; edma_sc = NULL; for (i = 0; i < EDMA_NUM_DEVICES; i++) { edma_dev = devclass_get_device(devclass_find("edma"), i); if (edma_dev) { edma_sc = device_get_softc(edma_dev); if (edma_sc->device_id == edma_device_id) { /* found */ break; } edma_sc = NULL; } } if (edma_sc == NULL) { device_printf(sc->dev, "no eDMA. can't operate\n"); return (ENXIO); } sc->edma_sc = edma_sc; sc->edma_chnum = edma_sc->channel_configure(edma_sc, edma_mux_group, edma_src_transmit); if (sc->edma_chnum < 0) { /* cant setup eDMA */ return (ENXIO); } return (0); }; static int setup_dma(struct sc_pcminfo *scp) { struct tcd_conf *tcd; struct sc_info *sc; sc = scp->sc; tcd = malloc(sizeof(struct tcd_conf), M_DEVBUF, M_WAITOK | M_ZERO); tcd->channel = sc->edma_chnum; tcd->ih = sai_dma_intr; tcd->ih_user = scp; tcd->saddr = sc->buf_base_phys; tcd->daddr = rman_get_start(sc->res[0]) + I2S_TDR0; /* * Bytes to transfer per each minor loop. * Hardware FIFO buffer size is 32x32bits. */ tcd->nbytes = 64; tcd->nmajor = 512; tcd->smod = 17; /* dma_size range */ tcd->dmod = 0; tcd->esg = 0; tcd->soff = 0x4; tcd->doff = 0; tcd->ssize = 0x2; tcd->dsize = 0x2; tcd->slast = 0; tcd->dlast_sga = 0; sc->tcd = tcd; sc->edma_sc->dma_setup(sc->edma_sc, sc->tcd); return (0); } static int saichan_trigger(kobj_t obj, void *data, int go) { struct sc_chinfo *ch = data; struct sc_pcminfo *scp = ch->parent; struct sc_info *sc = scp->sc; snd_mtxlock(sc->lock); switch (go) { case PCMTRIG_START: #if 0 device_printf(scp->dev, "trigger start\n"); #endif ch->run = 1; break; case PCMTRIG_STOP: case PCMTRIG_ABORT: #if 0 device_printf(scp->dev, "trigger stop or abort\n"); #endif ch->run = 0; break; } snd_mtxunlock(sc->lock); return (0); } static uint32_t saichan_getptr(kobj_t obj, void *data) { struct sc_pcminfo *scp; struct sc_chinfo *ch; struct sc_info *sc; ch = data; scp = ch->parent; sc = scp->sc; return (sc->pos); } static uint32_t sai_pfmt[] = { /* * eDMA doesn't allow 24-bit coping, * so we use 32. */ SND_FORMAT(AFMT_S32_LE, 2, 0), 0 }; static struct pcmchan_caps sai_pcaps = {44100, 192000, sai_pfmt, 0}; static struct pcmchan_caps * saichan_getcaps(kobj_t obj, void *data) { return (&sai_pcaps); } static kobj_method_t saichan_methods[] = { KOBJMETHOD(channel_init, saichan_init), KOBJMETHOD(channel_free, saichan_free), KOBJMETHOD(channel_setformat, saichan_setformat), KOBJMETHOD(channel_setspeed, saichan_setspeed), KOBJMETHOD(channel_setblocksize, saichan_setblocksize), KOBJMETHOD(channel_trigger, saichan_trigger), KOBJMETHOD(channel_getptr, saichan_getptr), KOBJMETHOD(channel_getcaps, saichan_getcaps), KOBJMETHOD_END }; CHANNEL_DECLARE(saichan); static int sai_probe(device_t dev) { if (!ofw_bus_status_okay(dev)) return (ENXIO); if (!ofw_bus_is_compatible(dev, "fsl,mvf600-sai")) return (ENXIO); device_set_desc(dev, "Vybrid Family Synchronous Audio Interface"); return (BUS_PROBE_DEFAULT); } static void sai_intr(void *arg) { struct sc_pcminfo *scp; struct sc_info *sc; scp = arg; sc = scp->sc; device_printf(sc->dev, "Error I2S_TCSR == 0x%08x\n", READ4(sc, I2S_TCSR)); } static void setup_sai(struct sc_info *sc) { int reg; /* * TCR/RCR registers must not be altered when TCSR[TE] is set. */ reg = READ4(sc, I2S_TCSR); reg &= ~(TCSR_BCE | TCSR_TE | TCSR_FRDE); WRITE4(sc, I2S_TCSR, reg); reg = READ4(sc, I2S_TCR3); reg &= ~(TCR3_TCE); WRITE4(sc, I2S_TCR3, reg); reg = (64 << TCR1_TFW_S); WRITE4(sc, I2S_TCR1, reg); reg = READ4(sc, I2S_TCR2); reg &= ~(TCR2_MSEL_M << TCR2_MSEL_S); reg |= (1 << TCR2_MSEL_S); reg |= (TCR2_BCP | TCR2_BCD); WRITE4(sc, I2S_TCR2, reg); sai_configure_clock(sc); reg = READ4(sc, I2S_TCR3); reg |= (TCR3_TCE); WRITE4(sc, I2S_TCR3, reg); /* Configure to 32-bit I2S mode */ reg = READ4(sc, I2S_TCR4); reg &= ~(TCR4_FRSZ_M << TCR4_FRSZ_S); reg |= (1 << TCR4_FRSZ_S); /* 2 words per frame */ reg &= ~(TCR4_SYWD_M << TCR4_SYWD_S); reg |= (23 << TCR4_SYWD_S); reg |= (TCR4_MF | TCR4_FSE | TCR4_FSP | TCR4_FSD); WRITE4(sc, I2S_TCR4, reg); reg = READ4(sc, I2S_TCR5); reg &= ~(TCR5_W0W_M << TCR5_W0W_S); reg |= (23 << TCR5_W0W_S); reg &= ~(TCR5_WNW_M << TCR5_WNW_S); reg |= (23 << TCR5_WNW_S); reg &= ~(TCR5_FBT_M << TCR5_FBT_S); reg |= (31 << TCR5_FBT_S); WRITE4(sc, I2S_TCR5, reg); /* Enable transmitter */ reg = READ4(sc, I2S_TCSR); reg |= (TCSR_BCE | TCSR_TE | TCSR_FRDE); reg |= (1 << 10); /* FEIE */ WRITE4(sc, I2S_TCSR, reg); } static void sai_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int err) { bus_addr_t *addr; if (err) return; addr = (bus_addr_t*)arg; *addr = segs[0].ds_addr; } static int sai_attach(device_t dev) { char status[SND_STATUSLEN]; struct sc_pcminfo *scp; struct sc_info *sc; int err; sc = malloc(sizeof(*sc), M_DEVBUF, M_WAITOK | M_ZERO); sc->dev = dev; sc->sr = &rate_map[0]; sc->pos = 0; sc->lock = snd_mtxcreate(device_get_nameunit(dev), "sai softc"); if (sc->lock == NULL) { device_printf(dev, "Cant create mtx\n"); return (ENXIO); } if (bus_alloc_resources(dev, sai_spec, sc->res)) { device_printf(dev, "could not allocate resources\n"); return (ENXIO); } /* Memory interface */ sc->bst = rman_get_bustag(sc->res[0]); sc->bsh = rman_get_bushandle(sc->res[0]); /* eDMA */ if (find_edma_controller(sc)) { device_printf(dev, "could not find active eDMA\n"); return (ENXIO); } /* Setup PCM */ scp = malloc(sizeof(struct sc_pcminfo), M_DEVBUF, M_NOWAIT | M_ZERO); scp->sc = sc; scp->dev = dev; /* DMA */ sc->dma_size = 131072; /* * Must use dma_size boundary as modulo feature required. * Modulo feature allows setup circular buffer. */ err = bus_dma_tag_create( bus_get_dma_tag(sc->dev), 4, sc->dma_size, /* alignment, boundary */ BUS_SPACE_MAXADDR_32BIT, /* lowaddr */ BUS_SPACE_MAXADDR, /* highaddr */ NULL, NULL, /* filter, filterarg */ sc->dma_size, 1, /* maxsize, nsegments */ sc->dma_size, 0, /* maxsegsize, flags */ NULL, NULL, /* lockfunc, lockarg */ &sc->dma_tag); err = bus_dmamem_alloc(sc->dma_tag, (void **)&sc->buf_base, BUS_DMA_NOWAIT | BUS_DMA_COHERENT, &sc->dma_map); if (err) { device_printf(dev, "cannot allocate framebuffer\n"); return (ENXIO); } err = bus_dmamap_load(sc->dma_tag, sc->dma_map, sc->buf_base, sc->dma_size, sai_dmamap_cb, &sc->buf_base_phys, BUS_DMA_NOWAIT); if (err) { device_printf(dev, "cannot load DMA map\n"); return (ENXIO); } bzero(sc->buf_base, sc->dma_size); /* Setup interrupt handler */ err = bus_setup_intr(dev, sc->res[1], INTR_MPSAFE | INTR_TYPE_AV, NULL, sai_intr, scp, &sc->ih); if (err) { device_printf(dev, "Unable to alloc interrupt resource.\n"); return (ENXIO); } pcm_setflags(dev, pcm_getflags(dev) | SD_F_MPSAFE); err = pcm_register(dev, scp, 1, 0); if (err) { device_printf(dev, "Can't register pcm.\n"); return (ENXIO); } scp->chnum = 0; pcm_addchan(dev, PCMDIR_PLAY, &saichan_class, scp); scp->chnum++; snprintf(status, SND_STATUSLEN, "at simplebus"); pcm_setstatus(dev, status); mixer_init(dev, &saimixer_class, scp); setup_dma(scp); setup_sai(sc); return (0); } static device_method_t sai_pcm_methods[] = { DEVMETHOD(device_probe, sai_probe), DEVMETHOD(device_attach, sai_attach), { 0, 0 } }; static driver_t sai_pcm_driver = { "pcm", sai_pcm_methods, PCM_SOFTC_SIZE, }; DRIVER_MODULE(sai, simplebus, sai_pcm_driver, 0, 0); MODULE_DEPEND(sai, sound, SOUND_MINVER, SOUND_PREFVER, SOUND_MAXVER); MODULE_VERSION(sai, 1);