/*-
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2014 Ruslan Bukin
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Vybrid Family Display Control Unit (DCU4)
* Chapter 55, Vybrid Reference Manual, Rev. 5, 07/2013
*/
#include
__FBSDID("$FreeBSD$");
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include "gpio_if.h"
#include
#include
#include
#include
#include "fb_if.h"
#include
#define DCU_CTRLDESCCURSOR1 0x000 /* Control Descriptor Cursor 1 */
#define DCU_CTRLDESCCURSOR2 0x004 /* Control Descriptor Cursor 2 */
#define DCU_CTRLDESCCURSOR3 0x008 /* Control Descriptor Cursor 3 */
#define DCU_CTRLDESCCURSOR4 0x00C /* Control Descriptor Cursor 4 */
#define DCU_DCU_MODE 0x010 /* DCU4 Mode */
#define DCU_MODE_M 0x3
#define DCU_MODE_S 0
#define DCU_MODE_NORMAL 0x1
#define DCU_MODE_TEST 0x2
#define DCU_MODE_COLBAR 0x3
#define RASTER_EN (1 << 14) /* Raster scan of pixel data */
#define PDI_EN (1 << 13)
#define PDI_DE_MODE (1 << 11)
#define PDI_MODE_M 2
#define DCU_BGND 0x014 /* Background */
#define DCU_DISP_SIZE 0x018 /* Display Size */
#define DELTA_M 0x7ff
#define DELTA_Y_S 16
#define DELTA_X_S 0
#define DCU_HSYN_PARA 0x01C /* Horizontal Sync Parameter */
#define BP_H_SHIFT 22
#define PW_H_SHIFT 11
#define FP_H_SHIFT 0
#define DCU_VSYN_PARA 0x020 /* Vertical Sync Parameter */
#define BP_V_SHIFT 22
#define PW_V_SHIFT 11
#define FP_V_SHIFT 0
#define DCU_SYNPOL 0x024 /* Synchronize Polarity */
#define INV_HS (1 << 0)
#define INV_VS (1 << 1)
#define INV_PDI_VS (1 << 8) /* Polarity of PDI input VSYNC. */
#define INV_PDI_HS (1 << 9) /* Polarity of PDI input HSYNC. */
#define INV_PDI_DE (1 << 10) /* Polarity of PDI input DE. */
#define DCU_THRESHOLD 0x028 /* Threshold */
#define LS_BF_VS_SHIFT 16
#define OUT_BUF_HIGH_SHIFT 8
#define OUT_BUF_LOW_SHIFT 0
#define DCU_INT_STATUS 0x02C /* Interrupt Status */
#define DCU_INT_MASK 0x030 /* Interrupt Mask */
#define DCU_COLBAR_1 0x034 /* COLBAR_1 */
#define DCU_COLBAR_2 0x038 /* COLBAR_2 */
#define DCU_COLBAR_3 0x03C /* COLBAR_3 */
#define DCU_COLBAR_4 0x040 /* COLBAR_4 */
#define DCU_COLBAR_5 0x044 /* COLBAR_5 */
#define DCU_COLBAR_6 0x048 /* COLBAR_6 */
#define DCU_COLBAR_7 0x04C /* COLBAR_7 */
#define DCU_COLBAR_8 0x050 /* COLBAR_8 */
#define DCU_DIV_RATIO 0x054 /* Divide Ratio */
#define DCU_SIGN_CALC_1 0x058 /* Sign Calculation 1 */
#define DCU_SIGN_CALC_2 0x05C /* Sign Calculation 2 */
#define DCU_CRC_VAL 0x060 /* CRC Value */
#define DCU_PDI_STATUS 0x064 /* PDI Status */
#define DCU_PDI_STA_MSK 0x068 /* PDI Status Mask */
#define DCU_PARR_ERR_STATUS1 0x06C /* Parameter Error Status 1 */
#define DCU_PARR_ERR_STATUS2 0x070 /* Parameter Error Status 2 */
#define DCU_PARR_ERR_STATUS3 0x07C /* Parameter Error Status 3 */
#define DCU_MASK_PARR_ERR_ST1 0x080 /* Mask Parameter Error Status 1 */
#define DCU_MASK_PARR_ERR_ST2 0x084 /* Mask Parameter Error Status 2 */
#define DCU_MASK_PARR_ERR_ST3 0x090 /* Mask Parameter Error Status 3 */
#define DCU_THRESHOLD_INP_BUF_1 0x094 /* Threshold Input 1 */
#define DCU_THRESHOLD_INP_BUF_2 0x098 /* Threshold Input 2 */
#define DCU_THRESHOLD_INP_BUF_3 0x09C /* Threshold Input 3 */
#define DCU_LUMA_COMP 0x0A0 /* LUMA Component */
#define DCU_CHROMA_RED 0x0A4 /* Red Chroma Components */
#define DCU_CHROMA_GREEN 0x0A8 /* Green Chroma Components */
#define DCU_CHROMA_BLUE 0x0AC /* Blue Chroma Components */
#define DCU_CRC_POS 0x0B0 /* CRC Position */
#define DCU_LYR_INTPOL_EN 0x0B4 /* Layer Interpolation Enable */
#define DCU_LYR_LUMA_COMP 0x0B8 /* Layer Luminance Component */
#define DCU_LYR_CHRM_RED 0x0BC /* Layer Chroma Red */
#define DCU_LYR_CHRM_GRN 0x0C0 /* Layer Chroma Green */
#define DCU_LYR_CHRM_BLUE 0x0C4 /* Layer Chroma Blue */
#define DCU_COMP_IMSIZE 0x0C8 /* Compression Image Size */
#define DCU_UPDATE_MODE 0x0CC /* Update Mode */
#define READREG (1 << 30)
#define MODE (1 << 31)
#define DCU_UNDERRUN 0x0D0 /* Underrun */
#define DCU_GLBL_PROTECT 0x100 /* Global Protection */
#define DCU_SFT_LCK_BIT_L0 0x104 /* Soft Lock Bit Layer 0 */
#define DCU_SFT_LCK_BIT_L1 0x108 /* Soft Lock Bit Layer 1 */
#define DCU_SFT_LCK_DISP_SIZE 0x10C /* Soft Lock Display Size */
#define DCU_SFT_LCK_HS_VS_PARA 0x110 /* Soft Lock Hsync/Vsync Parameter */
#define DCU_SFT_LCK_POL 0x114 /* Soft Lock POL */
#define DCU_SFT_LCK_L0_TRANSP 0x118 /* Soft Lock L0 Transparency */
#define DCU_SFT_LCK_L1_TRANSP 0x11C /* Soft Lock L1 Transparency */
/* Control Descriptor */
#define DCU_CTRLDESCL(n, m) 0x200 + (0x40 * n) + 0x4 * (m - 1)
#define DCU_CTRLDESCLn_1(n) DCU_CTRLDESCL(n, 1)
#define DCU_CTRLDESCLn_2(n) DCU_CTRLDESCL(n, 2)
#define DCU_CTRLDESCLn_3(n) DCU_CTRLDESCL(n, 3)
#define TRANS_SHIFT 20
#define DCU_CTRLDESCLn_4(n) DCU_CTRLDESCL(n, 4)
#define BPP_MASK 0xf /* Bit per pixel Mask */
#define BPP_SHIFT 16 /* Bit per pixel Shift */
#define BPP24 0x5
#define EN_LAYER (1 << 31) /* Enable the layer */
#define DCU_CTRLDESCLn_5(n) DCU_CTRLDESCL(n, 5)
#define DCU_CTRLDESCLn_6(n) DCU_CTRLDESCL(n, 6)
#define DCU_CTRLDESCLn_7(n) DCU_CTRLDESCL(n, 7)
#define DCU_CTRLDESCLn_8(n) DCU_CTRLDESCL(n, 8)
#define DCU_CTRLDESCLn_9(n) DCU_CTRLDESCL(n, 9)
#define NUM_LAYERS 64
struct panel_info {
uint32_t width;
uint32_t height;
uint32_t h_back_porch;
uint32_t h_pulse_width;
uint32_t h_front_porch;
uint32_t v_back_porch;
uint32_t v_pulse_width;
uint32_t v_front_porch;
uint32_t clk_div;
uint32_t backlight_pin;
};
struct dcu_softc {
struct resource *res[2];
bus_space_tag_t bst;
bus_space_handle_t bsh;
void *ih;
device_t dev;
device_t sc_fbd; /* fbd child */
struct fb_info sc_info;
struct panel_info *panel;
};
static struct resource_spec dcu_spec[] = {
{ SYS_RES_MEMORY, 0, RF_ACTIVE },
{ SYS_RES_IRQ, 0, RF_ACTIVE },
{ -1, 0 }
};
static int
dcu_probe(device_t dev)
{
if (!ofw_bus_status_okay(dev))
return (ENXIO);
if (!ofw_bus_is_compatible(dev, "fsl,mvf600-dcu4"))
return (ENXIO);
device_set_desc(dev, "Vybrid Family Display Control Unit (DCU4)");
return (BUS_PROBE_DEFAULT);
}
static void
dcu_intr(void *arg)
{
struct dcu_softc *sc;
int reg;
sc = arg;
/* Ack interrupts */
reg = READ4(sc, DCU_INT_STATUS);
WRITE4(sc, DCU_INT_STATUS, reg);
/* TODO interrupt handler */
}
static int
get_panel_info(struct dcu_softc *sc, struct panel_info *panel)
{
phandle_t node;
pcell_t dts_value[3];
int len;
if ((node = ofw_bus_get_node(sc->dev)) == -1)
return (ENXIO);
/* panel size */
if ((len = OF_getproplen(node, "panel-size")) <= 0)
return (ENXIO);
OF_getencprop(node, "panel-size", dts_value, len);
panel->width = dts_value[0];
panel->height = dts_value[1];
/* hsync */
if ((len = OF_getproplen(node, "panel-hsync")) <= 0)
return (ENXIO);
OF_getencprop(node, "panel-hsync", dts_value, len);
panel->h_back_porch = dts_value[0];
panel->h_pulse_width = dts_value[1];
panel->h_front_porch = dts_value[2];
/* vsync */
if ((len = OF_getproplen(node, "panel-vsync")) <= 0)
return (ENXIO);
OF_getencprop(node, "panel-vsync", dts_value, len);
panel->v_back_porch = dts_value[0];
panel->v_pulse_width = dts_value[1];
panel->v_front_porch = dts_value[2];
/* clk divider */
if ((len = OF_getproplen(node, "panel-clk-div")) <= 0)
return (ENXIO);
OF_getencprop(node, "panel-clk-div", dts_value, len);
panel->clk_div = dts_value[0];
/* backlight pin */
if ((len = OF_getproplen(node, "panel-backlight-pin")) <= 0)
return (ENXIO);
OF_getencprop(node, "panel-backlight-pin", dts_value, len);
panel->backlight_pin = dts_value[0];
return (0);
}
static int
dcu_init(struct dcu_softc *sc)
{
struct panel_info *panel;
int reg;
int i;
panel = sc->panel;
/* Configure DCU */
reg = ((sc->sc_info.fb_height) << DELTA_Y_S);
reg |= (sc->sc_info.fb_width / 16);
WRITE4(sc, DCU_DISP_SIZE, reg);
reg = (panel->h_back_porch << BP_H_SHIFT);
reg |= (panel->h_pulse_width << PW_H_SHIFT);
reg |= (panel->h_front_porch << FP_H_SHIFT);
WRITE4(sc, DCU_HSYN_PARA, reg);
reg = (panel->v_back_porch << BP_V_SHIFT);
reg |= (panel->v_pulse_width << PW_V_SHIFT);
reg |= (panel->v_front_porch << FP_V_SHIFT);
WRITE4(sc, DCU_VSYN_PARA, reg);
WRITE4(sc, DCU_BGND, 0);
WRITE4(sc, DCU_DIV_RATIO, panel->clk_div);
reg = (INV_VS | INV_HS);
WRITE4(sc, DCU_SYNPOL, reg);
/* TODO: export to panel info */
reg = (0x3 << LS_BF_VS_SHIFT);
reg |= (0x78 << OUT_BUF_HIGH_SHIFT);
reg |= (0 << OUT_BUF_LOW_SHIFT);
WRITE4(sc, DCU_THRESHOLD, reg);
/* Mask all the interrupts */
WRITE4(sc, DCU_INT_MASK, 0xffffffff);
/* Reset all layers */
for (i = 0; i < NUM_LAYERS; i++) {
WRITE4(sc, DCU_CTRLDESCLn_1(i), 0x0);
WRITE4(sc, DCU_CTRLDESCLn_2(i), 0x0);
WRITE4(sc, DCU_CTRLDESCLn_3(i), 0x0);
WRITE4(sc, DCU_CTRLDESCLn_4(i), 0x0);
WRITE4(sc, DCU_CTRLDESCLn_5(i), 0x0);
WRITE4(sc, DCU_CTRLDESCLn_6(i), 0x0);
WRITE4(sc, DCU_CTRLDESCLn_7(i), 0x0);
WRITE4(sc, DCU_CTRLDESCLn_8(i), 0x0);
WRITE4(sc, DCU_CTRLDESCLn_9(i), 0x0);
}
/* Setup first layer */
reg = (sc->sc_info.fb_width | (sc->sc_info.fb_height << 16));
WRITE4(sc, DCU_CTRLDESCLn_1(0), reg);
WRITE4(sc, DCU_CTRLDESCLn_2(0), 0x0);
WRITE4(sc, DCU_CTRLDESCLn_3(0), sc->sc_info.fb_pbase);
reg = (BPP24 << BPP_SHIFT);
reg |= EN_LAYER;
reg |= (0xFF << TRANS_SHIFT); /* completely opaque */
WRITE4(sc, DCU_CTRLDESCLn_4(0), reg);
WRITE4(sc, DCU_CTRLDESCLn_5(0), 0xffffff);
WRITE4(sc, DCU_CTRLDESCLn_6(0), 0x0);
WRITE4(sc, DCU_CTRLDESCLn_7(0), 0x0);
WRITE4(sc, DCU_CTRLDESCLn_8(0), 0x0);
WRITE4(sc, DCU_CTRLDESCLn_9(0), 0x0);
/* Enable DCU in normal mode */
reg = READ4(sc, DCU_DCU_MODE);
reg &= ~(DCU_MODE_M << DCU_MODE_S);
reg |= (DCU_MODE_NORMAL << DCU_MODE_S);
reg |= (RASTER_EN);
WRITE4(sc, DCU_DCU_MODE, reg);
WRITE4(sc, DCU_UPDATE_MODE, READREG);
return (0);
}
static int
dcu_attach(device_t dev)
{
struct panel_info panel;
struct dcu_softc *sc;
device_t gpio_dev;
int err;
sc = device_get_softc(dev);
sc->dev = dev;
if (bus_alloc_resources(dev, dcu_spec, sc->res)) {
device_printf(dev, "could not allocate resources\n");
return (ENXIO);
}
/* Memory interface */
sc->bst = rman_get_bustag(sc->res[0]);
sc->bsh = rman_get_bushandle(sc->res[0]);
/* Setup interrupt handler */
err = bus_setup_intr(dev, sc->res[1], INTR_TYPE_BIO | INTR_MPSAFE,
NULL, dcu_intr, sc, &sc->ih);
if (err) {
device_printf(dev, "Unable to alloc interrupt resource.\n");
return (ENXIO);
}
if (get_panel_info(sc, &panel)) {
device_printf(dev, "Can't get panel info\n");
return (ENXIO);
}
sc->panel = &panel;
/* Bypass timing control (used for raw lcd panels) */
tcon_bypass();
/* Get the GPIO device, we need this to give power to USB */
gpio_dev = devclass_get_device(devclass_find("gpio"), 0);
if (gpio_dev == NULL) {
device_printf(sc->dev, "Error: failed to get the GPIO dev\n");
return (1);
}
/* Turn on backlight */
/* TODO: Use FlexTimer/PWM */
GPIO_PIN_SETFLAGS(gpio_dev, panel.backlight_pin, GPIO_PIN_OUTPUT);
GPIO_PIN_SET(gpio_dev, panel.backlight_pin, GPIO_PIN_HIGH);
sc->sc_info.fb_width = panel.width;
sc->sc_info.fb_height = panel.height;
sc->sc_info.fb_stride = sc->sc_info.fb_width * 3;
sc->sc_info.fb_bpp = sc->sc_info.fb_depth = 24;
sc->sc_info.fb_size = sc->sc_info.fb_height * sc->sc_info.fb_stride;
sc->sc_info.fb_vbase = (intptr_t)contigmalloc(sc->sc_info.fb_size,
M_DEVBUF, M_ZERO, 0, ~0, PAGE_SIZE, 0);
sc->sc_info.fb_pbase = (intptr_t)vtophys(sc->sc_info.fb_vbase);
#if 0
printf("%dx%d [%d]\n", sc->sc_info.fb_width, sc->sc_info.fb_height,
sc->sc_info.fb_stride);
printf("pbase == 0x%08x\n", sc->sc_info.fb_pbase);
#endif
memset((int8_t *)sc->sc_info.fb_vbase, 0x0, sc->sc_info.fb_size);
dcu_init(sc);
sc->sc_info.fb_name = device_get_nameunit(dev);
/* Ask newbus to attach framebuffer device to me. */
sc->sc_fbd = device_add_child(dev, "fbd", device_get_unit(dev));
if (sc->sc_fbd == NULL)
device_printf(dev, "Can't attach fbd device\n");
if (device_probe_and_attach(sc->sc_fbd) != 0) {
device_printf(sc->dev, "Failed to attach fbd device\n");
}
return (0);
}
static struct fb_info *
dcu4_fb_getinfo(device_t dev)
{
struct dcu_softc *sc = device_get_softc(dev);
return (&sc->sc_info);
}
static device_method_t dcu_methods[] = {
DEVMETHOD(device_probe, dcu_probe),
DEVMETHOD(device_attach, dcu_attach),
/* Framebuffer service methods */
DEVMETHOD(fb_getinfo, dcu4_fb_getinfo),
{ 0, 0 }
};
static driver_t dcu_driver = {
"fb",
dcu_methods,
sizeof(struct dcu_softc),
};
DRIVER_MODULE(fb, simplebus, dcu_driver, 0, 0);