#
# ZEDBOARD -- Custom configuration for the Xilinx Zynq-7000 based
#             ZedBoard (www.zedboard.org) and similar Zynq boards.
#
# For more information on this file, please read the config(5) manual page,
# and/or the handbook section on Kernel Configuration Files:
#
#    https://docs.freebsd.org/en/books/handbook/kernelconfig/#kernelconfig-config
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#

ident		ZEDBOARD

include 	"std.armv7"
include 	"../xilinx/std.zynq7"

makeoptions	MODULES_EXTRA="dtb/zynq"

options 	SCHED_ULE		# ULE scheduler
options 	PLATFORM		# Platform based SoC
#options 	NFSSD			# Network Filesystem Server
options 	SMP			# Enable multiple cores

# NFS root from boopt/dhcp
#options 	BOOTP
#options 	BOOTP_NFSROOT
#options 	BOOTP_COMPAT
#options 	BOOTP_NFSV3

options 	ROOTDEVNAME=\"ufs:mmcsd0s2a\"

# Interrupt controller
device		gic

# pseudo devices
device		clk
device		phy
device		hwreset
device		nvmem
device		regulator
device		syscon

# Cache controller
device		pl310			# PL310 L2 cache controller
# ARM MPCore timer
device		mpcore_timer

device		loop
device		ether
device		cgem			# Cadence GEM Gigabit Ethernet device
device		mii
device		e1000phy
device		rgephy			# Zybo uses Realtek RTL8211E
device		pty
device		uart
device		gpio

device		spibus
device		spigen
device		mx25l
device		zy7_qspi		# Xilinx Zynq QSPI controller
device		zy7_spi			# Xilinx Zynq SPI controller

device		md
device		mmc			# mmc/sd bus
device		mmcsd			# mmc/sd flash cards
device		sdhci			# generic sdhci
device		bpf			# Berkeley packet filter

# USB support
device		usb
device		ehci
device		umass
device		scbus			# SCSI bus (required for ATA/SCSI)
device		da			# Direct Access (disks)
device		axe			# USB-Ethernet


# Flattened Device Tree
options 	FDT			# Configure using FDT/DTB data
#options 	FDT_DTB_STATIC
#makeoptions	FDT_DTS_FILE=zedboard.dts