/*-
 * SPDX-License-Identifier: BSD-2-Clause
 *
 * Copyright (c) 2011 NetApp, Inc.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY NETAPP, INC ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL NETAPP, INC OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/smp.h>

#include <x86/specialreg.h>
#include <x86/apicreg.h>

#include <dev/vmm/vmm_ktr.h>

#include <machine/vmm.h>
#include "vmm_lapic.h"
#include "vlapic.h"

/*
 * Some MSI message definitions
 */
#define	MSI_X86_ADDR_MASK	0xfff00000
#define	MSI_X86_ADDR_BASE	0xfee00000
#define	MSI_X86_ADDR_RH		0x00000008	/* Redirection Hint */
#define	MSI_X86_ADDR_LOG	0x00000004	/* Destination Mode */

int
lapic_set_intr(struct vcpu *vcpu, int vector, bool level)
{
	struct vlapic *vlapic;

	/*
	 * According to section "Maskable Hardware Interrupts" in Intel SDM
	 * vectors 16 through 255 can be delivered through the local APIC.
	 */
	if (vector < 16 || vector > 255)
		return (EINVAL);

	vlapic = vm_lapic(vcpu);
	if (vlapic_set_intr_ready(vlapic, vector, level))
		vcpu_notify_event(vcpu, true);
	return (0);
}

int
lapic_set_local_intr(struct vm *vm, struct vcpu *vcpu, int vector)
{
	struct vlapic *vlapic;
	cpuset_t dmask;
	int cpu, error;

	if (vcpu == NULL) {
		error = 0;
		dmask = vm_active_cpus(vm);
		CPU_FOREACH_ISSET(cpu, &dmask) {
			vlapic = vm_lapic(vm_vcpu(vm, cpu));
			error = vlapic_trigger_lvt(vlapic, vector);
			if (error)
				break;
		}
	} else {
		vlapic = vm_lapic(vcpu);
		error = vlapic_trigger_lvt(vlapic, vector);
	}

	return (error);
}

int
lapic_intr_msi(struct vm *vm, uint64_t addr, uint64_t msg)
{
	int delmode, vec;
	uint32_t dest;
	bool phys;

	VM_CTR2(vm, "lapic MSI addr: %#lx msg: %#lx", addr, msg);

	if ((addr & MSI_X86_ADDR_MASK) != MSI_X86_ADDR_BASE) {
		VM_CTR1(vm, "lapic MSI invalid addr %#lx", addr);
		return (-1);
	}

	/*
	 * Extract the x86-specific fields from the MSI addr/msg
	 * params according to the Intel Arch spec, Vol3 Ch 10.
	 *
	 * The PCI specification does not support level triggered
	 * MSI/MSI-X so ignore trigger level in 'msg'.
	 *
	 * The 'dest' is interpreted as a logical APIC ID if both
	 * the Redirection Hint and Destination Mode are '1' and
	 * physical otherwise.
	 */
	dest = (addr >> 12) & 0xff;
	phys = ((addr & (MSI_X86_ADDR_RH | MSI_X86_ADDR_LOG)) !=
	    (MSI_X86_ADDR_RH | MSI_X86_ADDR_LOG));
	delmode = msg & APIC_DELMODE_MASK;
	vec = msg & 0xff;

	VM_CTR3(vm, "lapic MSI %s dest %#x, vec %d",
	    phys ? "physical" : "logical", dest, vec);

	vlapic_deliver_intr(vm, LAPIC_TRIG_EDGE, dest, phys, delmode, vec);
	return (0);
}

static bool
x2apic_msr(u_int msr)
{
	return (msr >= 0x800 && msr <= 0xBFF);
}

static u_int
x2apic_msr_to_regoff(u_int msr)
{

	return ((msr - 0x800) << 4);
}

bool
lapic_msr(u_int msr)
{

	return (x2apic_msr(msr) || msr == MSR_APICBASE);
}

int
lapic_rdmsr(struct vcpu *vcpu, u_int msr, uint64_t *rval, bool *retu)
{
	int error;
	u_int offset;
	struct vlapic *vlapic;

	vlapic = vm_lapic(vcpu);

	if (msr == MSR_APICBASE) {
		*rval = vlapic_get_apicbase(vlapic);
		error = 0;
	} else {
		offset = x2apic_msr_to_regoff(msr);
		error = vlapic_read(vlapic, 0, offset, rval, retu);
	}

	return (error);
}

int
lapic_wrmsr(struct vcpu *vcpu, u_int msr, uint64_t val, bool *retu)
{
	int error;
	u_int offset;
	struct vlapic *vlapic;

	vlapic = vm_lapic(vcpu);

	if (msr == MSR_APICBASE) {
		error = vlapic_set_apicbase(vlapic, val);
	} else {
		offset = x2apic_msr_to_regoff(msr);
		error = vlapic_write(vlapic, 0, offset, val, retu);
	}

	return (error);
}

int
lapic_mmio_write(struct vcpu *vcpu, uint64_t gpa, uint64_t wval, int size,
		 void *arg)
{
	int error;
	uint64_t off;
	struct vlapic *vlapic;

	off = gpa - DEFAULT_APIC_BASE;

	/*
	 * Memory mapped local apic accesses must be 4 bytes wide and
	 * aligned on a 16-byte boundary.
	 */
	if (size != 4 || off & 0xf)
		return (EINVAL);

	vlapic = vm_lapic(vcpu);
	error = vlapic_write(vlapic, 1, off, wval, arg);
	return (error);
}

int
lapic_mmio_read(struct vcpu *vcpu, uint64_t gpa, uint64_t *rval, int size,
		void *arg)
{
	int error;
	uint64_t off;
	struct vlapic *vlapic;

	off = gpa - DEFAULT_APIC_BASE;

	/*
	 * Memory mapped local apic accesses should be aligned on a
	 * 16-byte boundary.  They are also suggested to be 4 bytes
	 * wide, alas not all OSes follow suggestions.
	 */
	off &= ~3;
	if (off & 0xf)
		return (EINVAL);

	vlapic = vm_lapic(vcpu);
	error = vlapic_read(vlapic, 1, off, rval, arg);
	return (error);
}